ACC-MIB
1770 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5 | Nodeacc | |||
| 1.3.6.1.4.1.5.1 | NodeaccSBAR | |||
| 1.3.6.1.4.1.5.1.1 | NodeaccBRG | |||
| 1.3.6.1.4.1.5.1.1.1 | NodeaccSystem | |||
| 1.3.6.1.4.1.5.1.1.1.1 | NodeaccSysInfo | |||
| 1.3.6.1.4.1.5.1.1.1.1.1 | ScalaraccUnitName | read-write | mandatory | A printable ASCII string up to 32 octets long that is used to refer to a physical unit. This name is used in the prompt displayed at the maintenance terminal. |
| 1.3.6.1.4.1.5.1.1.1.1.2 | ScalaraccRomId | read-only | mandatory | A printable ASCII string that contains information about the hardware and the firmware (NOT the software). |
| 1.3.6.1.4.1.5.1.1.1.1.3 | ScalaraccSwVersion | read-only | mandatory | A printable ASCII string representing the software version number of the running code. |
| 1.3.6.1.4.1.5.1.1.1.1.4 | ScalaraccReset | read-write | mandatory | A Set command on this object will cause an immediate reset of the unit. |
| 1.3.6.1.4.1.5.1.1.1.1.5 | ScalaraccMemStatTbl | not-accessible | mandatory | Information about data buffer pools. Instance is pool number. |
| 1.3.6.1.4.1.5.1.1.1.1.5.1 | ScalaraccMemBlkEntSize | read-only | mandatory | Size (bytes) of these buffers |
| 1.3.6.1.4.1.5.1.1.1.1.5.2 | ScalaraccMemBlkEntTotal | read-only | mandatory | Total number of these buffers in pool, whether or not they are in use |
| 1.3.6.1.4.1.5.1.1.1.1.5.3 | ScalaraccMemBlkEntMax | read-only | mandatory | High water mark of usage of buffers |
| 1.3.6.1.4.1.5.1.1.1.1.5.4 | ScalaraccMemBlkEntInUse | read-only | mandatory | Number of buffers currently in use. |
| 1.3.6.1.4.1.5.1.1.1.1.5.5 | ScalaraccMemBlkEntFails | read-only | mandatory | Number of times requests were made for a buffer of this size that failed because none were avaliable. |
| 1.3.6.1.4.1.5.1.1.1.1.5.6 | ScalaraccMemBlkEntType | read-only | mandatory | Numeric classification of the buffer. |
| 1.3.6.1.4.1.5.1.1.1.1.5.7 | ScalaraccMemBlkEntAllocs | read-only | mandatory | Number of times a request was made for a buffer of this size. |
| 1.3.6.1.4.1.5.1.1.1.1.6 | NodeaccNvm | |||
| 1.3.6.1.4.1.5.1.1.1.1.6.1 | ScalaraccNvmTotalBlks | read-only | mandatory | Total number of NVM blocks. |
| 1.3.6.1.4.1.5.1.1.1.1.6.2 | ScalaraccNvmBlkSize | read-only | mandatory | NVM block size in bytes. |
| 1.3.6.1.4.1.5.1.1.1.1.6.3 | ScalaraccNvmDirSize | read-only | mandatory | The NVM directory size. |
| 1.3.6.1.4.1.5.1.1.1.1.6.4 | ScalaraccNvmFreeBlks | read-only | mandatory | The number of free NVM blocks. |
| 1.3.6.1.4.1.5.1.1.1.1.6.5 | ScalaraccNvmFileNumber | read-only | mandatory | The NVM file number. |
| 1.3.6.1.4.1.5.1.1.1.1.6.6 | ScalaraccNvmFileName | read-only | mandatory | The NVM file name. |
| 1.3.6.1.4.1.5.1.1.1.1.6.7 | ScalaraccNvmFileSize | read-only | mandatory | The NVM file size in bytes. |
| 1.3.6.1.4.1.5.1.1.1.1.7 | NodeaccSysConfigInfo | |||
| 1.3.6.1.4.1.5.1.1.1.1.7.1 | ScalaraccConfiguration | read-write | mandatory | Set the action to perform on the active configuration. A set to load or default will immediately reset the unit. On the restart the new configuration (either a… |
| 1.3.6.1.4.1.5.1.1.1.1.7.2 | ScalaraccConfigurationStatus | read-only | mandatory | The current state of the active configuration. The value changed indicates that the active configuration has changed since the last time it was saved to NVM. |
| 1.3.6.1.4.1.5.1.1.1.1.8 | ScalaraccScriptHalt | read-write | mandatory | A Set command on this object will cause an immediate halt to any existing configuration script execution. |
| 1.3.6.1.4.1.5.1.1.1.1.9 | NodeaccScriptCont | |||
| 1.3.6.1.4.1.5.1.1.1.1.9.1 | ScalaraccScriptContServer | read-write | mandatory | The IP address of the server holding the configuration script to be downloaded and executed following the next reset. |
| 1.3.6.1.4.1.5.1.1.1.1.9.2 | ScalaraccScriptContFile | read-write | mandatory | The filename (with complete pathname) of the configuration script to be downloaded and executed following the next reset. |
| 1.3.6.1.4.1.5.1.1.1.1.10 | ScalaraccGifnoc | read-only | mandatory | Reserved number for GIFNOC (S. Froyd, 20-August, 1994) |
| 1.3.6.1.4.1.5.1.1.1.1.11 | ScalaraccSysHWType | read-only | mandatory | The hardware platform product name |
| 1.3.6.1.4.1.5.1.1.1.1.12 | ScalaraccSysProcType | read-only | mandatory | Type of processor on this platform |
| 1.3.6.1.4.1.5.1.1.1.1.13 | ScalaraccSysLocalRam | read-only | mandatory | The amount of local RAM installed in the system in kilobytes |
| 1.3.6.1.4.1.5.1.1.1.1.14 | ScalaraccSysGlobalRam | read-only | mandatory | The amount of global RAM installed in the system in kilobytes |
| 1.3.6.1.4.1.5.1.1.1.1.15 | ScalaraccSysPowerSupply | read-only | mandatory | Type of processor on this platform |
| 1.3.6.1.4.1.5.1.1.1.1.16 | TableaccMemPoolTable | not-accessible | mandatory | A table of memory pools supported by this unit. Each pool describes a physical memory resource. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1 | RowaccMemPoolEntry | not-accessible | mandatory | An entry of information about a memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.1 | ColumnaccMemPoolName | read-only | mandatory | A printable ASCII string describing this memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.2 | ColumnaccMemPoolMaximum | read-only | mandatory | The maximum amount of memory in this memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.3 | ColumnaccMemPoolBytes | read-only | mandatory | The amount of memory currently available in this memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.4 | ColumnaccMemPoolFrags | read-only | mandatory | The number of times this memory pool has been fragmented. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.5 | ColumnaccMemPoolAlign | read-only | mandatory | The alignment this memory pool maintains. For example, a 4 in this field means memory from this pool is aligned on 32-bit boundaries. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.6 | ColumnaccMemPoolAllocs | read-only | mandatory | The number of allocation requests addressed to this memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.7 | ColumnaccMemPoolFails | read-only | mandatory | The number of times an allocation request addressed to this memory could not be satisfied. |
| 1.3.6.1.4.1.5.1.1.1.2 | NodeaccSessionCtrl | |||
| 1.3.6.1.4.1.5.1.1.1.2.1 | ScalaraccLogin | read-write | mandatory | A read attempt of this object is interpreted as a request for login to the unit. The instance is an ASCII string with the following (case sensitive) format: Co… |
| 1.3.6.1.4.1.5.1.1.1.2.2 | ScalaraccLogout | read-only | mandatory | A read attempt of this object is interpreted as a request for logout to the unit. The instance is an ASCII string with the following format: CommunityString:Pa… |
| 1.3.6.1.4.1.5.1.1.1.2.3 | ScalaraccLoginTimeout | read-write | mandatory | Session inactivity timer. Zero disables timer (no timeout) Default value is zero Range is 0-86400 seconds |
| 1.3.6.1.4.1.5.1.1.1.3 | TableaccTrapTable | not-accessible | mandatory | A table of systems to which Trap Messages generated by this unit shall be sent. To delete an entry, a SetRequest-PDU for the specific instance of accTrapAddr w… |
| 1.3.6.1.4.1.5.1.1.1.3.1 | RowaccTrapEntry | not-accessible | mandatory | A Trap Table entry |
| 1.3.6.1.4.1.5.1.1.1.3.1.1 | ColumnaccTrapAddr | read-write | mandatory | An IP address to which SNMP traps generated by the unit are sent. |
| 1.3.6.1.4.1.5.1.1.1.3.1.2 | ColumnaccTrapSeverity | read-write | mandatory | severity level of the traps to be sent ACC products generate enterprise specific traps for which different severity levels from 1 through 7 are assigned. Level… |
| 1.3.6.1.4.1.5.1.1.1.4 | NodeaccClock | |||
| 1.3.6.1.4.1.5.1.1.1.4.1 | ScalaraccDate | read-write | mandatory | The octet string of six bytes representing the date and time has the following format: YYMMDDHHMMSS where the valid range of values for each of the bytes is as… |
| 1.3.6.1.4.1.5.1.1.1.4.2 | ScalaraccUToffset | read-write | mandatory | 3-byte date string, HH MM SS |
| 1.3.6.1.4.1.5.1.1.1.4.3 | ScalaraccSysBootTime | read-only | mandatory | 3-byte date string, HH MM SS |
| 1.3.6.1.4.1.5.1.1.1.4.4 | ScalaraccSysCpuAvgShort | read-only | mandatory | percentage CPU used over the last minute |
| 1.3.6.1.4.1.5.1.1.1.4.5 | ScalaraccSysCpuAvgLong | read-only | mandatory | percentage CPU used over the last 5 minutes |
| 1.3.6.1.4.1.5.1.1.1.6 | TableaccAccessTable | not-accessible | mandatory | A table of users authorized to log in to this unit. To delete an entry, a SetRequest-PDU for the specific instance of accAccessAddr with a NULL value encoding … |
| 1.3.6.1.4.1.5.1.1.1.6.1 | RowaccAccessEntry | not-accessible | mandatory | An entry of information about an authorized user. |
| 1.3.6.1.4.1.5.1.1.1.6.1.1 | ColumnaccAccessCmty | read-write | mandatory | Access community |
| 1.3.6.1.4.1.5.1.1.1.6.1.2 | ColumnaccAccessAddr | read-write | mandatory | IP address from which a login request is honored. |
| 1.3.6.1.4.1.5.1.1.1.6.1.3 | ColumnaccAccessNetMask | read-write | mandatory | Subnet mask used to validate login requests. |
| 1.3.6.1.4.1.5.1.1.1.6.1.4 | ColumnaccAccessUdpPort | read-write | mandatory | UDP port number of the SNMP application. |
| 1.3.6.1.4.1.5.1.1.1.7 | ScalaraccReload | read-write | mandatory | Time until system reload shall occur. Upon expiry of the timer, the system will load and execute a new image of the application code. The load file will come f… |
| 1.3.6.1.4.1.5.1.1.1.8 | NodeaccIfNames | |||
| 1.3.6.1.4.1.5.1.1.1.8.1 | ScalaraccIfNumNames | read-only | mandatory | Number of interfaces (physical and logical). There are this many entries in the Name table. |
| 1.3.6.1.4.1.5.1.1.1.8.2 | TableaccIfNameTable | not-accessible | mandatory | A table of of mnemonic 'names' for physical and logical interfaces |
| 1.3.6.1.4.1.5.1.1.1.8.2.1 | RowaccIfNameEntry | not-accessible | mandatory | An entry in the Interface Name table |
| 1.3.6.1.4.1.5.1.1.1.8.2.1.1 | ColumnaccIfNameIndex | read-only | mandatory | Interface number |
| 1.3.6.1.4.1.5.1.1.1.8.2.1.2 | ColumnaccIfName | read-write | mandatory | Mnemonic name for this interface |
| 1.3.6.1.4.1.5.1.1.1.9 | TableaccIfGroupTable | not-accessible | mandatory | A table of interface group descriptors supported by this unit. Interface groups may be populated by physical or logical interfaces, or combinations of the two. |
| 1.3.6.1.4.1.5.1.1.1.9.1 | RowaccIfGroupEntry | not-accessible | mandatory | An entry of information about a interface group. |
| 1.3.6.1.4.1.5.1.1.1.9.1.1 | ColumnaccIFGroupIndex | read-only | mandatory | Index for the accIfGroupTable. |
| 1.3.6.1.4.1.5.1.1.1.9.1.2 | ColumnaccIFGroupName | read-only | mandatory | If accIFGroupIndexBase and accIFGroupIndexMax are equal then this object provides the full name of the port, else this object has the prefix of the port name. … |
| 1.3.6.1.4.1.5.1.1.1.9.1.3 | ColumnaccIFGroupType | read-only | mandatory | Type of port group |
| 1.3.6.1.4.1.5.1.1.1.9.1.4 | ColumnaccIFGroupIndexBase | read-only | mandatory | Lowest IFIndex in this IFGroup |
| 1.3.6.1.4.1.5.1.1.1.9.1.5 | ColumnaccIFGroupIndexMax | read-only | mandatory | The number of interfaces supported in this IFGroup |
| 1.3.6.1.4.1.5.1.1.2 | NodeaccStp | |||
| 1.3.6.1.4.1.5.1.1.2.1 | ScalaraccStpPriority | read-write | mandatory | Among all devices participating in spanning tree, the one with the highest priority (numerically lowest value of this parameter) is elected as the Root of the … |
| 1.3.6.1.4.1.5.1.1.2.2 | ScalaraccStpId | read-only | mandatory | Unique bridge identifier of this bridge. This object comprises two parts, one of which is the MAC address, and the other of which is the brStpPriority and is t… |
| 1.3.6.1.4.1.5.1.1.2.3 | ScalaraccStpBrAddr | read-only | mandatory | MAC address of this bridge. |
| 1.3.6.1.4.1.5.1.1.2.4 | ScalaraccStpMode | read-write | mandatory | State of this Bridge's participation in Spanning Tree. Spanning Tree takes care of network connectivity changes caused by addition/removal/failure of links. It… |
| 1.3.6.1.4.1.5.1.1.2.5 | ScalaraccStpFilterTime | read-only | mandatory | Minimum time period elapsing between the transmission of Hello frames through a given Bridge Port. No more than two Hello frames shall be transmitted in any br… |
| 1.3.6.1.4.1.5.1.1.2.6 | ScalaraccStpMcastAddr | read-write | mandatory | A unique MAC group address, recognised by all the Bridges within the Bridged Local Area Network. |
| 1.3.6.1.4.1.5.1.1.2.7 | ScalaraccStpTopChangeDet | read-only | mandatory | Indicates if this unit has detected the Topology change indication in the hello BPDU. no(0), yes(1) |
| 1.3.6.1.4.1.5.1.1.2.8 | ScalaraccStpTopChange | read-only | mandatory | Indicates if the STP topology of a network is in process of changing. no(0), yes(1) |
| 1.3.6.1.4.1.5.1.1.2.9 | ScalaraccStpTopChangeTimer | read-only | mandatory | This timer serves to determine the time period for which hello frames are transmitted with the Topology Change flag parameter set by the Bridge when it is the … |
| 1.3.6.1.4.1.5.1.1.2.10 | ScalaraccStpDesRoot | read-only | mandatory | The Bridge Identifier of the device currently assumed by this unit to be the Root. |
| 1.3.6.1.4.1.5.1.1.2.11 | ScalaraccStpRootPathCost | read-only | mandatory | Current path cost to the Root Bridge. |
| 1.3.6.1.4.1.5.1.1.2.12 | ScalaraccStpRootPort | read-only | mandatory | Port Number of the one Port in the direction of the Root. (Value is meaningless if this unit is the Root). |
| 1.3.6.1.4.1.5.1.1.2.13 | ScalaraccStpMaxAge | read-write | mandatory | The value of the Max Age parameter when the Bridge is the Root or attempting to become the Root. The Max Age parameter is conveyed to ensure that each Bridge i… |
| 1.3.6.1.4.1.5.1.1.2.14 | ScalaraccStpHelloTime | read-write | mandatory | Interval between Hello frames that this Bridge will initiate when it is Root or is attempting to be Root. |
| 1.3.6.1.4.1.5.1.1.2.15 | ScalaraccStpForwardDelay | read-write | mandatory | The time (seconds) spent in the Listening state while moving from the Blocking state to the Learning state. The time (seconds) spent in the Learning state whil… |
| 1.3.6.1.4.1.5.1.1.2.16 | ScalaraccStpUpTime | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.2.17 | ScalaraccStpTopChangeCnts | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.3 | NodeaccBrPort | |||
| 1.3.6.1.4.1.5.1.1.3.1 | NodeaccBrPortInfo | |||
| 1.3.6.1.4.1.5.1.1.3.1.1 | NodeaccBrPortStats | |||
| 1.3.6.1.4.1.5.1.1.3.1.1.1 | ScalaraccBrPortInNUcastPkts | read-only | mandatory | Number of non-unicast packets received |
| 1.3.6.1.4.1.5.1.1.3.1.1.2 | ScalaraccBrPortInUcastPkts | read-only | mandatory | Number of unicast packets received |
| 1.3.6.1.4.1.5.1.1.3.1.1.3 | ScalaraccBrPortInDupPkts | read-only | mandatory | Number of in packets duplicated |
| 1.3.6.1.4.1.5.1.1.3.1.1.4 | ScalaraccBrPortOutNUcastPkts | read-only | mandatory | Number of non-unicast packets sent |
| 1.3.6.1.4.1.5.1.1.3.1.1.5 | ScalaraccBrPortOutUcastPkts | read-only | mandatory | Number of unicast packets sent |
| 1.3.6.1.4.1.5.1.1.3.1.1.6 | ScalaraccBrPortStpInPkts | read-only | mandatory | Number of spanning tree packets recieved |
| 1.3.6.1.4.1.5.1.1.3.1.1.7 | ScalaraccBrPortStpOutPkts | read-only | mandatory | Number of spanning tree packets sent |
| 1.3.6.1.4.1.5.1.1.3.1.1.8 | ScalaraccBrPortOutDelayDiscPkts | read-only | mandatory | Number of output packets dropped because they were held in queue too long |
| 1.3.6.1.4.1.5.1.1.3.1.1.9 | ScalaraccBrPortOutPrioDiscPkts | read-only | mandatory | Packets discarded on ouput by the protocol priority filter mechanism |
| 1.3.6.1.4.1.5.1.1.3.1.1.10 | ScalaraccBrPortOutQLen | read-only | mandatory | Length of port output queue |
| 1.3.6.1.4.1.5.1.1.3.1.1.11 | ScalaraccBrPortInDiscPkts | read-only | mandatory | Number of bridge packets discarded at input |
| 1.3.6.1.4.1.5.1.1.3.1.2 | ScalaraccBrPortStpPriority | read-write | mandatory | Relative STP priority of this port |
| 1.3.6.1.4.1.5.1.1.3.1.3 | ScalaraccBrPortId | read-only | mandatory | Port ID |
| 1.3.6.1.4.1.5.1.1.3.1.5 | ScalaraccBrPortState | read-write | mandatory | accBrPortState reports the operational status of the port; it is writable for backward compatibility (writes also update accBrPortAdminStatus). disabled(0), bl… |
| 1.3.6.1.4.1.5.1.1.3.1.6 | ScalaraccBrPortStpPathCost | read-write | mandatory | Path cost |
| 1.3.6.1.4.1.5.1.1.3.1.7 | ScalaraccBrPortStpDesRoot | read-only | mandatory | Designated root |
| 1.3.6.1.4.1.5.1.1.3.1.8 | ScalaraccBrPortStpDesCost | read-only | mandatory | Cost to designated root |
| 1.3.6.1.4.1.5.1.1.3.1.9 | ScalaraccBrPortStpDesBridge | read-only | mandatory | Designated bridge |
| 1.3.6.1.4.1.5.1.1.3.1.10 | ScalaraccBrPortStpDesPort | read-only | mandatory | Designated port |
| 1.3.6.1.4.1.5.1.1.3.1.11 | ScalaraccBrPortAdminStatus | read-write | mandatory | accBrPortAdminStatus reports the administrative status of the port; an update to this variable is effective immediately. Note that the operational status may b… |
| 1.3.6.1.4.1.5.1.1.3.1.12 | ScalaraccBrPortLine | read-write | mandatory | Index of physical port associated with this bridge port. |
| 1.3.6.1.4.1.5.1.1.3.1.13 | ScalaraccBrPortProtocol | read-write | mandatory | note that these enumerated values match those in accSlotProtocol; the current implementation will not permit accBrPortProtocol to be set to x25. |
| 1.3.6.1.4.1.5.1.1.3.1.14 | ScalaraccBrPortFrDlci | read-write | mandatory | Frame Relay DLCI for this port |
| 1.3.6.1.4.1.5.1.1.3.1.15 | ScalaraccBrPortIndex | read-only | mandatory | Bridge Port Index |
| 1.3.6.1.4.1.5.1.1.3.1.16 | ScalaraccBrPortXBridgeStatus | read-only | mandatory | Bridge Port translating bridge status |
| 1.3.6.1.4.1.5.1.1.4 | NodeaccBridge | |||
| 1.3.6.1.4.1.5.1.1.4.1 | ScalaraccBrFdbTimeout | read-write | mandatory | Time (seconds) for which a learned Forwarding Database entry is valid before being deleted if it has not been seen. |
| 1.3.6.1.4.1.5.1.1.4.2 | ScalaraccBrFdbLearnMode | read-write | mandatory | When Learning Mode is active, Bridges update their Forwarding Database with dynamic entries learned by inspection of the Source MAC Address of received frames.… |
| 1.3.6.1.4.1.5.1.1.4.3 | ScalaraccBrFdbRamCurrSize | read-only | mandatory | The number of entries in the RAM FDB table that contains static as well as dynamic entries. |
| 1.3.6.1.4.1.5.1.1.4.5 | ScalaraccBrFdbRamMaxSize | read-write | mandatory | The maximum number of entries configured for the RAM FDB table. |
| 1.3.6.1.4.1.5.1.1.4.6 | ScalaraccBrFdbNvmMaxSize | read-only | mandatory | Number of static FDB entries that can be saved in the NVM RAM. |
| 1.3.6.1.4.1.5.1.1.4.7 | TableaccBrFdbTable | not-accessible | mandatory | A list of Forwarding Database entries. Entries may be added/deleted either through learning or explicit management action. |
| 1.3.6.1.4.1.5.1.1.4.7.1 | RowaccBrFdbEntry | not-accessible | mandatory | A Forwarding Database entry which defines Bridge action to be taken based upon the destination MAC Address of received frames. |
| 1.3.6.1.4.1.5.1.1.4.7.1.1 | ColumnaccBrFdbEntMacAddr | read-write | mandatory | MAC Address of the Forwarding Database Entry. Set this object to NULL to delete entry. |
| 1.3.6.1.4.1.5.1.1.4.7.1.2 | ColumnaccBrFdbEntDisp | read-write | mandatory | Disposition of received Frame. Note that a Frame is never sent back out on the Port on which it was received. forward(0), flood(1), discard(2) |
| 1.3.6.1.4.1.5.1.1.4.7.1.3 | ColumnaccBrFdbEntPort | read-write | mandatory | Port to which frame is to be relayed for frame to be forwarded. Has no meaning for other dispositions. |
| 1.3.6.1.4.1.5.1.1.4.7.1.4 | ColumnaccBrFdbEntTimer | read-only | mandatory | Age of Forwarding Database Entry. A value of zero indicates a static entry. |
| 1.3.6.1.4.1.5.1.1.4.8 | TableaccBrFpTable | not-accessible | mandatory | A list of Forwarding Priority Entries. Entries are added/deleted via management action. |
| 1.3.6.1.4.1.5.1.1.4.8.1 | RowaccBrFpEntry | not-accessible | mandatory | Relative Priority between frames to be forwarded on a Bridge Port. |
| 1.3.6.1.4.1.5.1.1.4.8.1.1 | ColumnaccBrFpIndex | read-write | mandatory | Port number |
| 1.3.6.1.4.1.5.1.1.4.8.1.2 | ColumnaccBrFpProt | read-write | mandatory | protocol type. Set this object to NULL to delete the entry. |
| 1.3.6.1.4.1.5.1.1.4.8.1.3 | ColumnaccBrFpPrio | read-write | mandatory | Relative forwarding priority assigned to protocol. discard(0), low(1), normal(2), high(3) |
| 1.3.6.1.4.1.5.1.1.4.9 | ScalaraccBrFpPriDefault | read-write | mandatory | Default priority to use for protocol types not specifically enumerated in table. discard(0), low(1), normal(2), high(3) |
| 1.3.6.1.4.1.5.1.1.4.10 | ScalaraccBrNumPorts | read-write | mandatory | Number of physical ports of unit. |
| 1.3.6.1.4.1.5.1.1.4.11 | ScalaraccBrCompress | read-write | mandatory | Bridge frame compression mode. |
| 1.3.6.1.4.1.5.1.1.4.14 | NodeaccBrPortX25Table | |||
| 1.3.6.1.4.1.5.1.1.4.14.1 | NodeaccBrPortX25Entry | |||
| 1.3.6.1.4.1.5.1.1.4.14.1.7 | ScalaraccBrPortX25FacIndex | read-write | mandatory | Index of optional facility string or 0. |
| 1.3.6.1.4.1.5.1.1.4.15 | ScalaraccBrMode | read-write | mandatory | Bridge mode. When the mode is set to 'passive', internally generated traffic is forwarded or flooded as appropriate; external traffic is not forwarded to other… |
| 1.3.6.1.4.1.5.1.1.4.16 | ScalaraccBrFilterMode | read-write | mandatory | When Filter Mode is on, entries in the Filtering table are used to determine the disposition of each frame. When Filter mode is off, no filtering is done. |
| 1.3.6.1.4.1.5.1.1.4.17 | ScalaraccBrFilterDefault | read-write | mandatory | The default disposition for all received frames when filter mode is ON. Note: When filtering is ON, and the bridge filter table search does NOT provide a match… |
| 1.3.6.1.4.1.5.1.1.4.18 | TableaccBrFilterTable | not-accessible | deprecated | A list of Filtering entries. |
| 1.3.6.1.4.1.5.1.1.4.18.1 | RowaccBrFilterEntry | not-accessible | deprecated | A Filtering entry which defines Bridge action to be taken based upon the destination AND source MAC Addresses, port number, port protocol and logic op of recei… |
| 1.3.6.1.4.1.5.1.1.4.18.1.1 | ColumnaccBrFilterEntDstMacAddr | read-write | deprecated | Destination MAC Address of the Filtering entry. |
| 1.3.6.1.4.1.5.1.1.4.18.1.2 | ColumnaccBrFilterEntSrcMacAddr | read-write | deprecated | Source MAC Address of the Filtering entry. |
| 1.3.6.1.4.1.5.1.1.4.18.1.3 | ColumnaccBrFilterEntDisp | read-write | deprecated | Disposition of received Frame. Note that a Frame is never sent back out on the Port on which it was received. |
| 1.3.6.1.4.1.5.1.1.4.18.1.4 | ColumnaccBrFilterEntPort | read-write | deprecated | In all cases, the destination port of the received frame. |
| 1.3.6.1.4.1.5.1.1.4.18.1.5 | ColumnaccBrFilterEntLogicalOp | read-write | deprecated | Logical operation to be performed in conjunction with specified protocol. This is an optional parameter. |
| 1.3.6.1.4.1.5.1.1.4.18.1.6 | ColumnaccBrFilterEntProtocol | read-write | deprecated | Protocol to be used in conjunction with logical operation to determine the disposition of all received packets. |
| 1.3.6.1.4.1.5.1.1.4.18.1.7 | ColumnaccBrFilterDiscards | read-only | deprecated | The number of packets discarded as a result of bridge filtering. Maintained globally for all ports. |
| 1.3.6.1.4.1.5.1.1.4.18.1.8 | ColumnaccBrFilterEntries | read-only | deprecated | The number of entries currently in the bridge filtering table. The maximum number of entries is 50. |
| 1.3.6.1.4.1.5.1.1.4.19 | TableaccBrFiltIITable | not-accessible | mandatory | A list of Filtering entries. |
| 1.3.6.1.4.1.5.1.1.4.19.1 | RowaccBrFiltIIEntry | not-accessible | mandatory | A Filtering entry which defines the SR action to be taken based upon the destination AND source MAC Addresses AFTER applying the address masks, port number, po… |
| 1.3.6.1.4.1.5.1.1.4.19.1.1 | ColumnaccBrFiltIIEntDstMacAddr | read-write | mandatory | Destination MAC Address of the Filtering entry. |
| 1.3.6.1.4.1.5.1.1.4.19.1.2 | ColumnaccBrFiltIIEntSrcMacAddr | read-write | mandatory | Source MAC Address of the Filtering entry. |
| 1.3.6.1.4.1.5.1.1.4.19.1.3 | ColumnaccBrFiltIIEntDisp | read-write | mandatory | Disposition of received Frame. Note that a Frame is never sent back out on the Port on which it was received. |
| 1.3.6.1.4.1.5.1.1.4.19.1.4 | ColumnaccBrFiltIIEntPort | read-write | mandatory | In all cases, the destination port of the received frame. |
| 1.3.6.1.4.1.5.1.1.4.19.1.5 | ColumnaccBrFiltIIEntLogicalOp | read-write | mandatory | Logical operation to be performed in conjunction with specified protocol. This is an optional parameter. |
| 1.3.6.1.4.1.5.1.1.4.19.1.6 | ColumnaccBrFiltIIEntProtocol | read-write | mandatory | Protocol to be used in conjunction with logical operation to determine the disposition of all received packets. |
| 1.3.6.1.4.1.5.1.1.4.19.1.7 | ColumnaccBrFiltIIEntDstMacAddrMask | read-write | mandatory | Destination MAC Address Mask for the Filtering entry. The mask is ANDed with the Destination address to determine that part of the MAC address which is used in… |
| 1.3.6.1.4.1.5.1.1.4.19.1.8 | ColumnaccBrFiltIIEntSrcMacAddrMask | read-write | mandatory | Source MAC Address Mask for the Filtering entry. The mask is ANDed with the Source address to determine that part of the MAC address which is used in the filte… |
| 1.3.6.1.4.1.5.1.1.4.19.1.9 | ColumnaccBrFiltIIEntStatus | read-write | mandatory | 0 indicates that the entry is invalid, 1 indicates that the entry is valid. |
| 1.3.6.1.4.1.5.1.1.4.20 | ScalaraccBrFiltIIDiscards | read-only | mandatory | The number of packets discarded as a result of bridge filtering. Maintained globally for all ports. |
| 1.3.6.1.4.1.5.1.1.4.21 | ScalaraccBrFiltIIEntries | read-only | mandatory | The number of entries currently in the bridge filtering table. The maximum number of entries is 150. |
| 1.3.6.1.4.1.5.1.1.4.22 | ScalaraccFdbWhichAddr | read-write | mandatory | Selects whether the MAC address in the forwarding database is to be compared to the destination or source MAC address in the traffic packets. |
| 1.3.6.1.4.1.5.1.1.5 | NodeaccSlot | |||
| 1.3.6.1.4.1.5.1.1.5.2 | TableaccSlotTable | not-accessible | mandatory | A list of physical port entries. The number of entries is given by the value of accSlotNum. |
| 1.3.6.1.4.1.5.1.1.5.2.1 | RowaccSlotEntry | not-accessible | mandatory | A table entry providing information about a specific physical port. |
| 1.3.6.1.4.1.5.1.1.5.2.1.9 | ColumnaccSlotLastChange | read-only | mandatory | Time when a state change was last detected on this physical port. |
| 1.3.6.1.4.1.5.1.1.5.2.1.11 | ColumnaccSlotInPkts | read-only | mandatory | Number of packets received on this physical interface. |
| 1.3.6.1.4.1.5.1.1.5.2.1.17 | ColumnaccSlotOutPkts | read-only | mandatory | Number of packets transmitted on this physical interface. |
| 1.3.6.1.4.1.5.1.1.5.2.1.21 | ColumnaccSlotNumChanges | read-only | mandatory | Number of times that this interface has changed state (either up-to-down or down-to-up). |
| 1.3.6.1.4.1.5.1.1.5.2.1.22 | ColumnaccSlotProtocol | read-write | mandatory | Protocol used on this slot. note that these enumerated values match those in accBrPortProtocol. |
| 1.3.6.1.4.1.5.1.1.5.2.1.23 | ColumnaccSlotClockMode | read-write | mandatory | Clock mode of this port |
| 1.3.6.1.4.1.5.1.1.5.2.1.24 | ColumnaccSlotQueueMode | read-write | mandatory | Queuing mode for this slot Fair queuing provides per-conversation bandwidth allocation, with additional bandwidth allocated to higher priority traffic. Precede… |
| 1.3.6.1.4.1.5.1.1.5.2.1.25 | ColumnaccSlotDialProcedure | read-write | mandatory | Dial Procedure. |
| 1.3.6.1.4.1.5.1.1.5.2.1.26 | ColumnaccSlotResyncMode | read-write | mandatory | Establishes operational mode of the Resync function for crypto gear. When active, a link-down condition intitiates resynchronization, which is manifested by se… |
| 1.3.6.1.4.1.5.1.1.5.2.1.27 | ColumnaccSlotCompressMode | read-write | mandatory | Establishes operational mode of Data Compression. This functionality is appropriate for serial lines. |
| 1.3.6.1.4.1.5.1.1.5.2.1.29 | ColumnaccSlotCompressV42bisP1 | read-only | mandatory | Number of codewords |
| 1.3.6.1.4.1.5.1.1.5.2.1.30 | ColumnaccSlotCompressV42bisP2 | read-only | mandatory | Maximum string size |
| 1.3.6.1.4.1.5.1.1.5.2.1.31 | ColumnaccSlotCompressDcs221P1 | read-write | mandatory | Compression Mode |
| 1.3.6.1.4.1.5.1.1.5.2.1.32 | ColumnaccSlotSevereCongPct | read-write | mandatory | Percent Congested |
| 1.3.6.1.4.1.5.1.1.5.2.1.33 | ColumnaccSlotDialAddress | read-write | mandatory | Dial Address. |
| 1.3.6.1.4.1.5.1.1.5.2.1.34 | ColumnaccSlotCompressRevision | read-write | mandatory | Indicates which data compression algorithm should be used for this physical port. If the confi gured protocol is Frame Relay, X.25 or PPP, the com pression mod… |
| 1.3.6.1.4.1.5.1.1.5.2.1.35 | ColumnaccSlotCompressMaxStreams | read-write | mandatory | The maximum number of independent data streams for this physical port. This object determines the size of the history buffer pool. |
| 1.3.6.1.4.1.5.1.1.5.2.1.36 | ColumnaccSlotCompressMessageLevel | read-write | mandatory | . |
| 1.3.6.1.4.1.5.1.1.5.2.1.37 | ColumnaccSlotIfType | read-write | mandatory | . |
| 1.3.6.1.4.1.5.1.1.6 | NodeaccCompress | |||
| 1.3.6.1.4.1.5.1.1.6.1 | TableaccCompressDialNeighborTable | not-accessible | mandatory | Data compression neighbor exception table for dial ports containing data compression parameters for selected neighbors. |
| 1.3.6.1.4.1.5.1.1.6.1.1 | RowaccCompressDialNeighborEntry | not-accessible | mandatory | Data compression neighbor exception table entry containing data compression parameters for a particular dial port neighbor. |
| 1.3.6.1.4.1.5.1.1.6.1.1.1 | ColumnaccCompressDialNeighborIfIndex | read-only | mandatory | The ifindex of the dial port via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.1.1.2 | ColumnaccCompressDialNeighborCallAddress | read-only | mandatory | The call address of the neighbor to which the dial port is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.1.1.3 | ColumnaccCompressDialNeighborStatus | read-write | mandatory | The administrative status of data compression for this dial neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanentl… |
| 1.3.6.1.4.1.5.1.1.6.2 | TableaccCompressFfrNeighborTable | not-accessible | mandatory | Data compression neighbor exception table for frame relay circuits containing data compression parameters for selected neighbors. |
| 1.3.6.1.4.1.5.1.1.6.2.1 | RowaccCompressFfrNeighborEntry | not-accessible | mandatory | Data compression neighbor exception table entry containing data compression parameters for a particular frame relay neighbor. |
| 1.3.6.1.4.1.5.1.1.6.2.1.1 | ColumnaccCompressFfrNeighborIfIndex | read-only | mandatory | The physical port index via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.2.1.2 | ColumnaccCompressFfrNeighborDlci | read-only | mandatory | A unique identifier for the neighbor. In this case it is the local DLCI. |
| 1.3.6.1.4.1.5.1.1.6.2.1.3 | ColumnaccCompressFfrNeighborStatus | read-write | mandatory | The administrative status of data compression for this neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanently rem… |
| 1.3.6.1.4.1.5.1.1.6.3 | TableaccCompressX25NeighborTable | not-accessible | mandatory | Data compression neighbor exception table for X25 circuits containing data compression parameters for selected neighbors. |
| 1.3.6.1.4.1.5.1.1.6.3.1 | RowaccCompressX25NeighborEntry | not-accessible | mandatory | Data compression neighbor exception table entry containing data compression parameters for a particular X.25 neighbor. |
| 1.3.6.1.4.1.5.1.1.6.3.1.1 | ColumnaccCompressX25NeighborIfIndex | read-only | mandatory | The physical port index via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.3.1.2 | ColumnaccCompressX25NeighborAddress | read-only | mandatory | A unique identifier for the neighbor. This is the neighbor's DTE address |
| 1.3.6.1.4.1.5.1.1.6.3.1.3 | ColumnaccCompressX25NeighborStatus | read-write | mandatory | The administrative status of data compression for this neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanently rem… |
| 1.3.6.1.4.1.5.1.1.6.4 | TableaccCompressDialStatTable | not-accessible | mandatory | Data compression statistics table for dial ports containing data compression statistics for all active dial port neighbors. |
| 1.3.6.1.4.1.5.1.1.6.4.1 | RowaccCompressDialStatEntry | not-accessible | mandatory | Data compression dial port statistics table entry containing data compression statistics for a particular dial port neighbor. |
| 1.3.6.1.4.1.5.1.1.6.4.1.1 | ColumnaccCompressDialStatIfIndex | read-only | mandatory | The interface index of the dial port via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.4.1.2 | ColumnaccCompressDialStatCallAddress | read-only | mandatory | The call address of the neighbor to which the dial port is currently connected. |
| 1.3.6.1.4.1.5.1.1.6.4.1.3 | ColumnaccCompressDialStatStatus | read-only | mandatory | The operational status of the neighbor. |
| 1.3.6.1.4.1.5.1.1.6.4.1.4 | ColumnaccCompressDialStatOctetsIns | read-only | mandatory | The total number of compressed octets presented for decompression. |
| 1.3.6.1.4.1.5.1.1.6.4.1.5 | ColumnaccCompressDialStatOctetsOuts | read-only | mandatory | The total number of compressed octets generated after compression. |
| 1.3.6.1.4.1.5.1.1.6.4.1.6 | ColumnaccCompressDialStatPacketsIns | read-only | mandatory | The total number of uncompressed packets generated by decompression. |
| 1.3.6.1.4.1.5.1.1.6.4.1.7 | ColumnaccCompressDialStatPacketsOuts | read-only | mandatory | The total number of uncompressed packets presented for compression. |
| 1.3.6.1.4.1.5.1.1.6.4.1.8 | ColumnaccCompressDialStatUnCompIns | read-only | mandatory | The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompre… |
| 1.3.6.1.4.1.5.1.1.6.4.1.9 | ColumnaccCompressDialStatUnCompOuts | read-only | mandatory | The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in … |
| 1.3.6.1.4.1.5.1.1.6.4.1.10 | ColumnaccCompressDialStatAvgCompIn | read-only | mandatory | The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only… |
| 1.3.6.1.4.1.5.1.1.6.4.1.11 | ColumnaccCompressDialStatAvgCompOut | read-only | mandatory | The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only b… |
| 1.3.6.1.4.1.5.1.1.6.4.1.12 | ColumnaccCompressDialStatHdrErrors | read-only | mandatory | The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.4.1.13 | ColumnaccCompressDialStatResyncs | read-only | mandatory | The number of resynchronizations. |
| 1.3.6.1.4.1.5.1.1.6.4.1.14 | ColumnaccCompressDialStatNoEndMarks | read-only | mandatory | The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.4.1.15 | ColumnaccCompressDialStatNoBufAvails | read-only | mandatory | The number of times the neighbor was connected and no history buffer could be allocated. |
| 1.3.6.1.4.1.5.1.1.6.5 | TableaccCompressFfrStatTable | not-accessible | mandatory | Data compression statistics table containing data compression statistics for all active frame relay neighbors. |
| 1.3.6.1.4.1.5.1.1.6.5.1 | RowaccCompressFfrStatEntry | not-accessible | mandatory | Data compression statistics table entry containing data compression statistics for a particular frame relay neighbor. |
| 1.3.6.1.4.1.5.1.1.6.5.1.1 | ColumnaccCompressFfrStatIfIndex | read-only | mandatory | The physical port index of the port via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.5.1.2 | ColumnaccCompressFfrStatDlci | read-only | mandatory | This is the local DLCI for the frame relay neighbor. |
| 1.3.6.1.4.1.5.1.1.6.5.1.3 | ColumnaccCompressFfrStatStatus | read-only | mandatory | The operational status of the neighbor. |
| 1.3.6.1.4.1.5.1.1.6.5.1.4 | ColumnaccCompressFfrStatOctetsIns | read-only | mandatory | The total number of compressed octets presented for decompression. |
| 1.3.6.1.4.1.5.1.1.6.5.1.5 | ColumnaccCompressFfrStatOctetsOuts | read-only | mandatory | The total number of compressed octets generated after compression. |
| 1.3.6.1.4.1.5.1.1.6.5.1.6 | ColumnaccCompressFfrStatPacketsIns | read-only | mandatory | The total number of uncompressed packets generated by decompression. |
| 1.3.6.1.4.1.5.1.1.6.5.1.7 | ColumnaccCompressFfrStatPacketsOuts | read-only | mandatory | The total number of uncompressed packets presented for compression. |
| 1.3.6.1.4.1.5.1.1.6.5.1.8 | ColumnaccCompressFfrStatUnCompIns | read-only | mandatory | The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompre… |
| 1.3.6.1.4.1.5.1.1.6.5.1.9 | ColumnaccCompressFfrStatUnCompOuts | read-only | mandatory | The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in … |
| 1.3.6.1.4.1.5.1.1.6.5.1.10 | ColumnaccCompressFfrStatAvgCompIn | read-only | mandatory | The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only… |
| 1.3.6.1.4.1.5.1.1.6.5.1.11 | ColumnaccCompressFfrStatAvgCompOut | read-only | mandatory | The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only b… |
| 1.3.6.1.4.1.5.1.1.6.5.1.12 | ColumnaccCompressFfrStatHdrErrors | read-only | mandatory | The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.5.1.13 | ColumnaccCompressFfrStatResyncs | read-only | mandatory | The number of resynchronizations. |
| 1.3.6.1.4.1.5.1.1.6.5.1.14 | ColumnaccCompressFfrStatNoEndMarks | read-only | mandatory | The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.5.1.15 | ColumnaccCompressFfrStatNoBufAvails | read-only | mandatory | The number of times the neighbor was connected and no history buffer could be allocated. |
| 1.3.6.1.4.1.5.1.1.6.6 | TableaccCompressX25StatTable | not-accessible | mandatory | Data compression statistics table containing data compression statistics for all active X.25 neighbors. |
| 1.3.6.1.4.1.5.1.1.6.6.1 | RowaccCompressX25StatEntry | not-accessible | mandatory | Data compression statistics table entry containing data compression statistics for a particular X.25 neighbor. |
| 1.3.6.1.4.1.5.1.1.6.6.1.1 | ColumnaccCompressX25StatIfIndex | read-only | mandatory | The physical port index of the port via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.6.1.2 | ColumnaccCompressX25StatAddress | read-only | mandatory | DTE address for the X.25 neighbor. |
| 1.3.6.1.4.1.5.1.1.6.6.1.3 | ColumnaccCompressX25StatStatus | read-only | mandatory | The operational status of the neighbor. |
| 1.3.6.1.4.1.5.1.1.6.6.1.4 | ColumnaccCompressX25StatOctetsIns | read-only | mandatory | The total number of compressed octets presented for decompression. |
| 1.3.6.1.4.1.5.1.1.6.6.1.5 | ColumnaccCompressX25StatOctetsOuts | read-only | mandatory | The total number of compressed octets generated after compression. |
| 1.3.6.1.4.1.5.1.1.6.6.1.6 | ColumnaccCompressX25StatPacketsIns | read-only | mandatory | The total number of uncompressed packets generated by decompression. |
| 1.3.6.1.4.1.5.1.1.6.6.1.7 | ColumnaccCompressX25StatPacketsOuts | read-only | mandatory | The total number of uncompressed packets presented for compression. |
| 1.3.6.1.4.1.5.1.1.6.6.1.8 | ColumnaccCompressX25StatUnCompIns | read-only | mandatory | The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompre… |
| 1.3.6.1.4.1.5.1.1.6.6.1.9 | ColumnaccCompressX25StatUnCompOuts | read-only | mandatory | The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in … |
| 1.3.6.1.4.1.5.1.1.6.6.1.10 | ColumnaccCompressX25StatAvgCompIn | read-only | mandatory | The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only… |
| 1.3.6.1.4.1.5.1.1.6.6.1.11 | ColumnaccCompressX25StatAvgCompOut | read-only | mandatory | The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only b… |
| 1.3.6.1.4.1.5.1.1.6.6.1.12 | ColumnaccCompressX25StatHdrErrors | read-only | mandatory | The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.6.1.13 | ColumnaccCompressX25StatResyncs | read-only | mandatory | The number of resynchronizations. |
| 1.3.6.1.4.1.5.1.1.6.6.1.14 | ColumnaccCompressX25StatNoEndMarks | read-only | mandatory | The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.6.1.15 | ColumnaccCompressX25StatNoBufAvails | read-only | mandatory | The number of times the neighbor was connected and no history buffer could be allocated. |
| 1.3.6.1.4.1.5.1.1.6.7 | TableaccCompressPhysStatTable | not-accessible | mandatory | Data compression statistics table for physical ports containing aggregate data compression statistics for all active and inactive neighbors. |
| 1.3.6.1.4.1.5.1.1.6.7.1 | RowaccCompressPhysStatEntry | not-accessible | mandatory | Data compression statistics table entry containing aggregate data compression statistics for all neighbors through a particular physical port. |
| 1.3.6.1.4.1.5.1.1.6.7.1.1 | ColumnaccCompressPhysStatIfIndex | read-only | mandatory | The index of the physical port via which the neighbor(s) is(are) accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.7.1.2 | ColumnaccCompressPhysStatStatus | read-only | mandatory | The operational status of the neighbor. For X.25 and Frame Relay ports, as there can be more than one neighbor, this is the superior status. |
| 1.3.6.1.4.1.5.1.1.6.7.1.3 | ColumnaccCompressPhysStatOctetsIns | read-only | mandatory | The total number of compressed octets presented for decompression. |
| 1.3.6.1.4.1.5.1.1.6.7.1.4 | ColumnaccCompressPhysStatOctetsOuts | read-only | mandatory | The total number of compressed octets generated after compression. |
| 1.3.6.1.4.1.5.1.1.6.7.1.5 | ColumnaccCompressPhysStatPacketsIns | read-only | mandatory | The total number of uncompressed packets generated by decompression. |
| 1.3.6.1.4.1.5.1.1.6.7.1.6 | ColumnaccCompressPhysStatPacketsOuts | read-only | mandatory | The total number of uncompressed packets presented for compression. |
| 1.3.6.1.4.1.5.1.1.6.7.1.7 | ColumnaccCompressPhysStatUnCompIns | read-only | mandatory | The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompre… |
| 1.3.6.1.4.1.5.1.1.6.7.1.8 | ColumnaccCompressPhysStatUnCompOuts | read-only | mandatory | The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in … |
| 1.3.6.1.4.1.5.1.1.6.7.1.9 | ColumnaccCompressPhysStatAvgCompIn | read-only | mandatory | The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only… |
| 1.3.6.1.4.1.5.1.1.6.7.1.10 | ColumnaccCompressPhysStatAvgCompOut | read-only | mandatory | The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only b… |
| 1.3.6.1.4.1.5.1.1.6.7.1.11 | ColumnaccCompressPhysStatHdrErrors | read-only | mandatory | The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.7.1.12 | ColumnaccCompressPhysStatResyncs | read-only | mandatory | The number of resynchronizations. |
| 1.3.6.1.4.1.5.1.1.6.7.1.13 | ColumnaccCompressPhysStatNoEndMarks | read-only | mandatory | The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.7.1.14 | ColumnaccCompressPhysStatNoBufAvails | read-only | mandatory | The number of times the neighbor was connected and no history buffer could be allocated. |
| 1.3.6.1.4.1.5.1.1.7 | NodeaccLapb | |||
| 1.3.6.1.4.1.5.1.1.7.1 | ScalaraccLapbNum | read-only | mandatory | Number of HDLC ports |
| 1.3.6.1.4.1.5.1.1.7.2 | TableaccLapbParmTable | not-accessible | mandatory | HDLC LAPB port parameters |
| 1.3.6.1.4.1.5.1.1.7.2.1 | RowaccLapbParmEntry | not-accessible | mandatory | LAPB parameters for a port. |
| 1.3.6.1.4.1.5.1.1.7.2.1.1 | ColumnaccLapbIndex | read-only | mandatory | Physical port number of this interface. |
| 1.3.6.1.4.1.5.1.1.7.2.1.2 | ColumnaccLapbType | read-write | mandatory | LAPB station type for this interface. dte(0), dce(1) |
| 1.3.6.1.4.1.5.1.1.7.2.1.3 | ColumnaccLapbT1Timer | read-write | mandatory | T1 timer value (in milliseconds) for this interface. |
| 1.3.6.1.4.1.5.1.1.7.2.1.4 | ColumnaccLapbN2Count | read-write | mandatory | N2 counter (retry counter) for this interface. |
| 1.3.6.1.4.1.5.1.1.7.2.1.5 | ColumnaccLapbFrameWindow | read-write | mandatory | LAPB frame window. If a value greater than 7 is specified, modulo-128 sequencing is used instead of modulo-8 sequencing. |
| 1.3.6.1.4.1.5.1.1.7.2.1.6 | ColumnaccLapbFlags | read-write | mandatory | Number of flags to insert between frames on transmission. |
| 1.3.6.1.4.1.5.1.1.7.2.1.7 | ColumnaccHdlcRrPolling | read-write | mandatory | T3 Timer. |
| 1.3.6.1.4.1.5.1.1.7.2.1.8 | ColumnaccHdlcFCS | read-write | mandatory | FCS Mode. |
| 1.3.6.1.4.1.5.1.1.7.3 | TableaccLapbStatTable | not-accessible | mandatory | A list of statistics for serial ports configured for LABP protocol. |
| 1.3.6.1.4.1.5.1.1.7.3.1 | RowaccLapbStatEntry | not-accessible | mandatory | LAPB statistics for a specific port. |
| 1.3.6.1.4.1.5.1.1.7.3.1.1 | ColumnaccLapbStatIndex | read-only | mandatory | Port number for this LAPB serial port |
| 1.3.6.1.4.1.5.1.1.7.3.1.2 | ColumnaccLapbStatBadFCSIns | read-only | mandatory | Number of LAPB frames received with bad frame checksum (FCS). |
| 1.3.6.1.4.1.5.1.1.7.3.1.3 | ColumnaccLapbStatFRMRIns | read-only | mandatory | Number of LAPB frames received with framing errors |
| 1.3.6.1.4.1.5.1.1.7.3.1.4 | ColumnaccLapbStatT1Timeouts | read-only | mandatory | Number of T1 timeouts detected on this port |
| 1.3.6.1.4.1.5.1.1.7.3.1.5 | ColumnaccLapbStatREJIns | read-only | mandatory | number of REJECT LAPB frames received |
| 1.3.6.1.4.1.5.1.1.7.3.1.6 | ColumnaccLapbStatREJOuts | read-only | mandatory | Number of LAPB REJECT frames transmitted |
| 1.3.6.1.4.1.5.1.1.7.3.1.7 | ColumnaccLapbStatShortIns | read-only | mandatory | Number of short LAPB frames received |
| 1.3.6.1.4.1.5.1.1.8 | NodeaccEnet | |||
| 1.3.6.1.4.1.5.1.1.8.1 | ScalaraccEnetNum | read-only | mandatory | Number of Ethernet ports on this unit. |
| 1.3.6.1.4.1.5.1.1.8.2 | TableaccEnetParmTable | not-accessible | mandatory | A table of parameters of Ethernet ports The number of table entries is accEnetNum. |
| 1.3.6.1.4.1.5.1.1.8.2.1 | RowaccEnetParmEntry | not-accessible | mandatory | Parameters relative to a specific Ethernet port. |
| 1.3.6.1.4.1.5.1.1.8.2.1.1 | ColumnaccEnetPortNo | read-only | mandatory | Number of this ethernet port. |
| 1.3.6.1.4.1.5.1.1.8.3 | TableaccEnetStatTable | not-accessible | mandatory | A list of per-port statistics for ports configured as Ethernet LANs. |
| 1.3.6.1.4.1.5.1.1.8.3.1 | RowaccEnetStatEntry | not-accessible | mandatory | Statistics for specific ethernet ports. |
| 1.3.6.1.4.1.5.1.1.8.3.1.1 | ColumnaccEnetIndex | read-only | mandatory | Port number of this entry |
| 1.3.6.1.4.1.5.1.1.8.3.1.2 | ColumnaccEnetStatCRCErrs | read-only | mandatory | Number of CRC (Checksum) errors detected on this port. |
| 1.3.6.1.4.1.5.1.1.8.3.1.3 | ColumnaccEnetStatAlignErrs | read-only | mandatory | Number of alignment errors detected. |
| 1.3.6.1.4.1.5.1.1.8.3.1.4 | ColumnaccEnetStatOutColls | read-only | mandatory | Number of collisions detected on output. |
| 1.3.6.1.4.1.5.1.1.8.3.1.5 | ColumnaccEnetStatJabberConds | read-only | mandatory | Number of jabber conditions detected. |
| 1.3.6.1.4.1.5.1.1.8.3.1.6 | ColumnaccEnetStatCarrierLosts | read-only | mandatory | Number of losses of carrier detected. |
| 1.3.6.1.4.1.5.1.1.8.3.1.7 | ColumnaccEnetStatHeartbeatErrs | read-only | mandatory | Number of heartbeat errors detected. |
| 1.3.6.1.4.1.5.1.1.8.3.1.8 | ColumnaccEnetStatGiants | read-only | mandatory | Number of giant frames detected. |
| 1.3.6.1.4.1.5.1.1.8.3.1.9 | ColumnaccEnetStatOneRetrys | read-only | mandatory | Number of times a retry condition was detected. |
| 1.3.6.1.4.1.5.1.1.8.3.1.10 | ColumnaccEnetStatMultRetrys | read-only | mandatory | Total number of retries. |
| 1.3.6.1.4.1.5.1.1.8.3.1.11 | ColumnaccEnetStatLateColls | read-only | mandatory | Number of late collisions detected. |
| 1.3.6.1.4.1.5.1.1.8.3.1.12 | ColumnaccEnetChipCrashes | read-only | mandatory | Number of times aberrant behaviour was detected in Ethernet chip |
| 1.3.6.1.4.1.5.1.1.9 | NodeaccMultilink | |||
| 1.3.6.1.4.1.5.1.1.9.1 | TableaccMultilinkParameterTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.9.1.1 | RowaccMultilinkParameterEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.9.1.1.1 | ColumnaccMultilinkParameterIndex | read-write | mandatory | An integer that uniquely identifies this multilink group. |
| 1.3.6.1.4.1.5.1.1.9.1.1.2 | ColumnaccMultilinkParameterIfIndex | read-write | mandatory | An integer that identifies the row of the systemwide interfaces table associated with this multilink group. |
| 1.3.6.1.4.1.5.1.1.9.1.1.3 | ColumnaccMultilinkParameterMessageLevel | read-write | mandatory | How verbose the multilink port will be when reporting state changes, errors, and warnings. Level 1 is the least verbose, level 7 the most. The message levels a… |
| 1.3.6.1.4.1.5.1.1.9.1.1.5 | ColumnaccMultilinkParameterAdminState | read-write | mandatory | An integer that specifies the administrative enabling or disabling of this multilink group. |
| 1.3.6.1.4.1.5.1.1.9.1.1.6 | ColumnaccMultilinkParameterOperState | read-only | mandatory | An integer that specifies the operational state of this multilink group. |
| 1.3.6.1.4.1.5.1.1.9.1.1.7 | ColumnaccMultilinkParameterEncapsulation | read-write | mandatory | If set to ietf-ppp, a multilink group of PPP links will follow the standard PPP multilink operations methods. The value acc-new is reserved for future use. The… |
| 1.3.6.1.4.1.5.1.1.9.1.1.9 | ColumnaccMultilinkParameterPhysicalPort | read-only | mandatory | A text string listing all physical ports associated with this multilink port. |
| 1.3.6.1.4.1.5.1.1.9.2 | TableaccMlTable | not-accessible | mandatory | A table of Multilink (load-sharing) groups. |
| 1.3.6.1.4.1.5.1.1.9.2.1 | RowaccMlEntry | not-accessible | mandatory | Info on specific multilink group |
| 1.3.6.1.4.1.5.1.1.9.2.1.7 | ColumnaccMlAdminStatus | read-write | mandatory | Status of load sharing capability. In those systems which support the accSlotProtocol object, the protocol must be set to HDLC for both ports. |
| 1.3.6.1.4.1.5.1.1.9.3 | TableaccMultilinkStatTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.9.3.1 | RowaccMultilinkStatEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.9.3.1.1 | ColumnaccMultilinkStatIndex | read-only | mandatory | An integer that uniquely identifies this multilink group. |
| 1.3.6.1.4.1.5.1.1.9.3.1.2 | ColumnaccMultilinkStatRcvInSeqs | read-only | mandatory | The number of messages received over all physical ports associated with this multilink group whose multilink sequence number matched what the receiver expected. |
| 1.3.6.1.4.1.5.1.1.9.3.1.3 | ColumnaccMultilinkStatRcvOutSeqs | read-only | mandatory | The number of messages received over all physical ports associated with this multilink group whose multilink sequence number did not match what the receiver ex… |
| 1.3.6.1.4.1.5.1.1.9.3.1.4 | ColumnaccMultilinkStatRcvOutWindows | read-only | mandatory | The number of messages received over all physical ports associated with this multilink group whose multilink sequence number did not fall within the receiver's… |
| 1.3.6.1.4.1.5.1.1.9.3.1.5 | ColumnaccMultilinkStatRcvSeqBreaks | read-only | mandatory | The number of times the receiver has declared that a break in sequence numbers has occurred. |
| 1.3.6.1.4.1.5.1.1.9.3.1.6 | ColumnaccMultilinkStatRcvWrongEncaps | read-only | mandatory | The number of messages received over all physical ports associated with this multilink group that did not bear the expected multilink header. |
| 1.3.6.1.4.1.5.1.1.9.3.1.7 | ColumnaccMultilinkStatRcvPendings | read-only | mandatory | The number of messages received over all physical ports associated with this multilink group that are currently being held pending the arrival of a message wit… |
| 1.3.6.1.4.1.5.1.1.9.3.1.8 | ColumnaccMultilinkStatRcvRingColls | read-only | mandatory | The number of messages received over all physical ports associated with this multilink group that would have occupied the same storage as another message being… |
| 1.3.6.1.4.1.5.1.1.9.3.1.9 | ColumnaccMultilinkStatSendEncapFails | read-only | mandatory | The number of times the multilink group was unable to encapsulate an outgoing message. |
| 1.3.6.1.4.1.5.1.1.9.4 | TableaccMultilinkStackTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.9.4.1 | RowaccMultilinkStackEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.9.4.1.1 | ColumnaccMultilinkStackGroup | read-write | mandatory | An integer identifying the row of the ifTable containing information about a multilink group. |
| 1.3.6.1.4.1.5.1.1.9.4.1.2 | ColumnaccMultilinkStackInterface | read-write | mandatory | An integer identifying the row of the systemwide interfaces table containing information about a physical port or dial port associated with a multilink group. |
| 1.3.6.1.4.1.5.1.1.10 | NodeaccAsPort | |||
| 1.3.6.1.4.1.5.1.1.10.2 | NodeaccConsole | |||
| 1.3.6.1.4.1.5.1.1.10.2.1 | NodeaccConsoleParms | |||
| 1.3.6.1.4.1.5.1.1.10.2.1.5 | ScalaraccConsoleSpeed | read-write | mandatory | Baud rate for this port; {1200, 2400, 4800, 7200, 9600 } are permitted. |
| 1.3.6.1.4.1.5.1.1.11 | NodeaccArp | |||
| 1.3.6.1.4.1.5.1.1.11.1 | ScalaraccArpTimeout | read-write | mandatory | Aging timer value (in minutes) for ARP table entries. |
| 1.3.6.1.4.1.5.1.1.11.2 | TableaccArpTable | not-accessible | mandatory | The ARP (Address Resolution Protocol) table. This is an alternate view of the atTable. |
| 1.3.6.1.4.1.5.1.1.11.2.1 | RowaccArpEntry | not-accessible | mandatory | A correspondence between logical (IP) and physical (MAC) addresses. |
| 1.3.6.1.4.1.5.1.1.11.2.1.1 | ColumnaccArpPhysAddress | read-only | mandatory | The Ethernet address of the ARP table entry. |
| 1.3.6.1.4.1.5.1.1.11.2.1.2 | ColumnaccArpNetAddress | read-only | mandatory | IP address of this entry. Set this object to NULL to delete an entry. |
| 1.3.6.1.4.1.5.1.1.11.2.1.3 | ColumnaccArpEntStatus | read-only | mandatory | Status of the ARP table entry. |
| 1.3.6.1.4.1.5.1.1.11.3 | ScalaraccArpType | read-write | mandatory | State of proxy ARP capability. normal(0), proxy(2) |
| 1.3.6.1.4.1.5.1.1.11.4 | ScalaraccArpReqRcvds | read-only | mandatory | Number of ARP Requests received. |
| 1.3.6.1.4.1.5.1.1.11.5 | ScalaraccArpReqSents | read-only | mandatory | Number of ARP Requests sent. |
| 1.3.6.1.4.1.5.1.1.11.6 | ScalaraccArpRspRcvds | read-only | mandatory | Number of ARP Responses received. |
| 1.3.6.1.4.1.5.1.1.11.7 | ScalaraccArpRspSents | read-only | mandatory | Number of ARP Responses sent. |
| 1.3.6.1.4.1.5.1.1.11.8 | ScalaraccArpInErrs | read-only | mandatory | Number of ARP input errors encountered. |
| 1.3.6.1.4.1.5.1.1.11.9 | ScalaraccArpOutErrs | read-only | mandatory | Number of ARP output errors encountered. |
| 1.3.6.1.4.1.5.1.1.11.10 | ScalaraccArpUnknownProtos | read-only | mandatory | Number of address resolution requests for which this ARP implementation did not recognize the protocol. |
| 1.3.6.1.4.1.5.1.1.11.11 | ScalaraccArpPromiscuous | read-write | mandatory | When operating promiscuously, the device will learn ARP information from all ARP packets received. When non-promiscuous, the device will learn information only… |
| 1.3.6.1.4.1.5.1.1.11.12 | ScalaraccArpRefresh | read-write | mandatory | When operating in refresh mode, when it is time for an entry to age out, the device will refresh the entry by ARPing for it again. Devices will thus stay in th… |
| 1.3.6.1.4.1.5.1.1.12 | TableaccIpRoutingTable | not-accessible | mandatory | Widening of standard IP routing table Entries are added/deleted in conjunction with operations on the standard routing table. |
| 1.3.6.1.4.1.5.1.1.12.1 | RowaccIpRoutingEntry | not-accessible | mandatory | Additional information about a route. |
| 1.3.6.1.4.1.5.1.1.12.1.2 | ColumnaccIpRouteDestSubnet | read-write | mandatory | Subnet mask of destination |
| 1.3.6.1.4.1.5.1.1.13 | NodeaccProbe | |||
| 1.3.6.1.4.1.5.1.1.13.1 | ScalaraccProbeAddr | read-write | mandatory | Hexadecimal representation of the memory address of the long-word whose content we seek. |
| 1.3.6.1.4.1.5.1.1.13.2 | ScalaraccProbeData | read-only | mandatory | Contents (long word) of memory location of accProbeAddr. |
| 1.3.6.1.4.1.5.1.1.14 | TableaccIpAddrTable | not-accessible | mandatory | IP Address translation table extension |
| 1.3.6.1.4.1.5.1.1.14.1 | RowaccIpAddrEntry | not-accessible | mandatory | Adds additional information to the ipAddrTable. |
| 1.3.6.1.4.1.5.1.1.14.1.1 | ColumnaccIpAddrMtu | read-write | mandatory | Maximum Transmission Unit size for this entry. (46..1500) for Ethernet ports, (128..2048) for HDLC or X25 ports Object will be set to default value if not pres… |
| 1.3.6.1.4.1.5.1.1.14.1.2 | ColumnaccIpAddrSecurityType | read-write | mandatory | Type of security for this entry. |
| 1.3.6.1.4.1.5.1.1.14.1.3 | ColumnaccIpAddrSecurityClass | read-write | mandatory | Security classification for this entry. Object will be set to default value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.14.1.4 | ColumnaccIpAddrSecurityAuth | read-write | mandatory | Security authorization for this entry. |
| 1.3.6.1.4.1.5.1.1.14.1.5 | ColumnaccIpAddrBcastAddr | read-write | mandatory | IP Broadcast address associated with this entry. Object will be set to default value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.14.1.6 | ColumnaccIpAdEntMetric | read-write | mandatory | Metric |
| 1.3.6.1.4.1.5.1.1.14.1.7 | ColumnaccIpAdEntPreference | read-write | mandatory | An entry with a Primary designation will be selected over one with a Secondary designation when a choice amongst otherwise equal entries is required. |
| 1.3.6.1.4.1.5.1.1.15 | NodeaccEgp | |||
| 1.3.6.1.4.1.5.1.1.15.1 | TableaccEgpNeighTable | not-accessible | mandatory | This table is an extension (widening) of the egpNeighTable. |
| 1.3.6.1.4.1.5.1.1.15.1.1 | RowaccEgpNeighEntry | not-accessible | mandatory | Additional information about an EGP neighbor. |
| 1.3.6.1.4.1.5.1.1.15.1.1.1 | ColumnaccEgpUptime | read-only | mandatory | Uptime of EGP neighbor |
| 1.3.6.1.4.1.5.1.1.15.1.1.2 | ColumnaccEgpFAS | read-only | mandatory | Foreign Autonomous System number |
| 1.3.6.1.4.1.5.1.1.15.1.1.3 | ColumnaccEgpSndSeqs | read-only | mandatory | Number of sequences sent to this egp neighbor. |
| 1.3.6.1.4.1.5.1.1.15.1.1.4 | ColumnaccEgpRcvSeqs | read-only | mandatory | Number of sequences received from this EGP neighbor. |
| 1.3.6.1.4.1.5.1.1.15.2 | ScalaraccEgpAdminStatus | read-write | mandatory | Administrative status of EGP protocol. |
| 1.3.6.1.4.1.5.1.1.15.3 | ScalaraccEgpASNumber | read-write | mandatory | Autonomous System number, assigned by central administrative authority. |
| 1.3.6.1.4.1.5.1.1.15.4 | ScalaraccEgpMetric | read-write | mandatory | Relative route cost. |
| 1.3.6.1.4.1.5.1.1.15.5 | ScalaraccEgpInErrMsgs | read-only | mandatory | Number of erroneous EGP messages received |
| 1.3.6.1.4.1.5.1.1.15.6 | ScalaraccEgpOutErrMsgs | read-only | mandatory | Number of errors encountered during EGP message generation. |
| 1.3.6.1.4.1.5.1.1.15.7 | ScalaraccEgpStateChanges | read-only | mandatory | Number of EGP state changes. |
| 1.3.6.1.4.1.5.1.1.15.8 | ScalaraccEgpLastChange | read-only | mandatory | Timestamp of last EGP state change. |
| 1.3.6.1.4.1.5.1.1.16 | NodeaccRip | |||
| 1.3.6.1.4.1.5.1.1.16.1 | ScalaraccRipAdminStatus | read-write | mandatory | Adminstrative status of RIP protocol. Extended causes subnet mask information to be included in RIP packets, permitting variable-length subnet masking. |
| 1.3.6.1.4.1.5.1.1.16.2 | ScalaraccRipUpdateTimer | read-write | mandatory | This unit will send updates to its neighbors at the interval established by this timer. Note that all other RIP timers are scaled off this value. |
| 1.3.6.1.4.1.5.1.1.16.3 | ScalaraccRipGateway | read-write | mandatory | Declares if the unit is the gateway unit for an AS. Indicates if the unit does or does not advertise that it is the default route. Extended mode causes EGP-der… |
| 1.3.6.1.4.1.5.1.1.16.4 | ScalaraccRipMetric | read-write | mandatory | Metric used with the default route in routing updates when this unit is acting as a gateway. Unit is hopcount; 16 represents infinity. |
| 1.3.6.1.4.1.5.1.1.16.5 | NodeaccRipNeighborList | |||
| 1.3.6.1.4.1.5.1.1.16.5.1 | ScalaraccRipNeighbor | read-write | mandatory | A neighbor to whom routing updates are sent, and from whom updates are accepted. RIP neighbors must be on the local network. In the case of an unnumbered link … |
| 1.3.6.1.4.1.5.1.1.16.5.2 | ScalaraccRipNeighborIfindex | read-only | mandatory | The ifIndex of the port this RIP neighbor is conected to. It is derived from the IP network table (accIpAddrTable). |
| 1.3.6.1.4.1.5.1.1.16.6 | ScalaraccRipInCmdCnts | read-only | mandatory | Number of RIP command packets successfully received. |
| 1.3.6.1.4.1.5.1.1.16.7 | ScalaraccRipInRspCnts | read-only | mandatory | Number of RIP response packets successfully received. |
| 1.3.6.1.4.1.5.1.1.16.8 | ScalaraccRipInErrors | read-only | mandatory | Number of RIP response and command packets received with errors. Also includes count of packets that could not be handled due to internal errors. |
| 1.3.6.1.4.1.5.1.1.16.9 | ScalaraccRipOutCmdCnts | read-only | mandatory | Number of RIP command packets successfully transmitted. |
| 1.3.6.1.4.1.5.1.1.16.10 | ScalaraccRipOutRspCounts | read-only | mandatory | Number of RIP response packets successfully transmitted. |
| 1.3.6.1.4.1.5.1.1.17 | NodeaccX25 | |||
| 1.3.6.1.4.1.5.1.1.17.1 | TableaccX25AtTable | not-accessible | mandatory | Address translation table for X.25 interfaces. This is a superset of the standard address translation table. Entries are added/deleted via management action. |
| 1.3.6.1.4.1.5.1.1.17.1.1 | RowaccX25AtEntry | not-accessible | mandatory | Address translation entry for X.25 interfaces. |
| 1.3.6.1.4.1.5.1.1.17.1.1.1 | ColumnaccX25AtIfIndex | read-write | mandatory | Interface number (ifIndex) for which this translation entry is valid. |
| 1.3.6.1.4.1.5.1.1.17.1.1.2 | ColumnaccX25AtIpAddress | read-write | mandatory | IP Address of this entry Set this object to NULL to delete entry. |
| 1.3.6.1.4.1.5.1.1.17.1.1.3 | ColumnaccX25AtNetInOutAddr | read-write | mandatory | X.25 address to use when calling this destination. (both X.25 addresses are checked when mapping an X.25 address to an IP address) Object required in entry-add… |
| 1.3.6.1.4.1.5.1.1.17.1.1.4 | ColumnaccX25AtNetInAddr | read-write | mandatory | Alternate X.25 address to check when mapping an X.25 address to an IP address Object will be set to default value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.17.1.1.5 | ColumnaccX25AtNetFacIndex | read-write | mandatory | Index of optional facility string or 0. |
| 1.3.6.1.4.1.5.1.1.17.2 | TableaccX25SubnetParmTable | not-accessible | mandatory | Per-network parameters for IP networks attached via X.25 interface. Entries added/deleted via management action. |
| 1.3.6.1.4.1.5.1.1.17.2.1 | RowaccX25SubnetParmEntry | not-accessible | mandatory | X.25-specific parameters for this IP network |
| 1.3.6.1.4.1.5.1.1.17.2.1.1 | ColumnaccX25SubnetAddr | read-write | mandatory | Network/subnet number of IP network Set this object to NULL to delete entry. |
| 1.3.6.1.4.1.5.1.1.17.2.1.2 | ColumnaccX25Facility | read-write | mandatory | selects whether DDN Standard Mode facility is included in call requests. |
| 1.3.6.1.4.1.5.1.1.17.2.1.3 | ColumnaccX25PktNegot | read-write | mandatory | specifies value for Packet Size Negotiation Facility (power of 2 between 16 and 1024), or zero if Packet Size Negotiation Facility is not to be used. |
| 1.3.6.1.4.1.5.1.1.17.2.1.4 | ColumnaccX25WindowNegot | read-write | mandatory | specifies value for Window Size Negotiation Facility (between 1 and 127 inclusive), or zero if Window Size Negotiation Facility is not to be used. |
| 1.3.6.1.4.1.5.1.1.17.3 | TableaccX25PortParmTable | not-accessible | mandatory | Per-port parameters for X.25 interfaces. |
| 1.3.6.1.4.1.5.1.1.17.3.1 | RowaccX25PortParmEntry | not-accessible | mandatory | X25 parameters of a specific port. |
| 1.3.6.1.4.1.5.1.1.17.3.1.1 | ColumnaccX25PortParmIndex | read-only | mandatory | Port number |
| 1.3.6.1.4.1.5.1.1.17.3.1.2 | ColumnaccX25AddrMode | read-write | mandatory | specifies address translation technique. |
| 1.3.6.1.4.1.5.1.1.17.3.1.3 | ColumnaccX25PktSize | read-write | mandatory | specifies default data packet size for this port. |
| 1.3.6.1.4.1.5.1.1.17.3.1.4 | ColumnaccX25PktWind | read-write | mandatory | specifies default packet window size for this port. |
| 1.3.6.1.4.1.5.1.1.17.3.1.5 | ColumnaccX25SvcNumber | read-write | mandatory | specifies maximum number of switched virtual circuits to be used on this port. |
| 1.3.6.1.4.1.5.1.1.17.3.1.6 | ColumnaccX25SvcBase | read-write | mandatory | specifies lowest Logical Channel Identifier to be used for switched virtual circuits. |
| 1.3.6.1.4.1.5.1.1.17.3.1.7 | ColumnaccX25ExtendClr | read-write | mandatory | specifies whether extended format for call clearing packets (as defined by X.25-1984) is permitted |
| 1.3.6.1.4.1.5.1.1.17.3.1.8 | ColumnaccX25ExtendSeq | read-write | mandatory | Use of extended sequence numbers |
| 1.3.6.1.4.1.5.1.1.17.3.1.9 | ColumnaccX25IdleMin | read-write | mandatory | minimum idle time for closing circuits; a circuit will not be cleared until it has been idle (no data has been sent or received) for at least this amount of ti… |
| 1.3.6.1.4.1.5.1.1.17.3.1.10 | ColumnaccX25IdleMax | read-write | mandatory | maximum idle time for closing circuits; a circuit will be cleared when its idle time exceeds this value. |
| 1.3.6.1.4.1.5.1.1.17.3.1.11 | ColumnaccX25IdleScale | read-write | mandatory | scale factor for idle timeout: a circuit will be cleared when it has been idle for accX25IdleMin plus accX25IdleScale times the number of available circuits. |
| 1.3.6.1.4.1.5.1.1.17.3.1.12 | ColumnaccX25SvcMax | read-write | mandatory | Maximum number of virtual circuits which can be opened to a single destination. |
| 1.3.6.1.4.1.5.1.1.17.3.1.13 | ColumnaccX25SvcLimit | read-write | mandatory | Maximum number of switched virtual circuits that IP can use. The value must not exceed the total number of logical channels available on this trunk. |
| 1.3.6.1.4.1.5.1.1.17.3.1.14 | ColumnaccX25OpenThresh | read-write | mandatory | Threshold (number of IP datagrams queued per circuit) at which an additional virtual circuit will be opened. |
| 1.3.6.1.4.1.5.1.1.17.3.1.15 | ColumnaccX25SvcMin | read-write | mandatory | The minimum number of virtual circuits which IP will leave available for first circuits to other destinations |
| 1.3.6.1.4.1.5.1.1.17.3.1.16 | ColumnaccX25SvcDelay | read-write | mandatory | Delay (seconds) between opening of successive virtual circuits to same destination. |
| 1.3.6.1.4.1.5.1.1.17.3.1.17 | ColumnaccX25InitBackoff | read-write | mandatory | Initial backoff time (seconds) to delay before next attempt to open an additional virtual circuit to the same destination when an attempt to do so has failed. |
| 1.3.6.1.4.1.5.1.1.17.3.1.18 | ColumnaccX25MaxBackoff | read-write | mandatory | Maximum backoff time (seconds) to delay between subsequent attempts to open additional virtual circuits to the same destination. The actual delay is varied exp… |
| 1.3.6.1.4.1.5.1.1.17.3.1.19 | ColumnaccX25OurAddress | read-write | mandatory | Our X25 address (put in outbound packets) |
| 1.3.6.1.4.1.5.1.1.17.3.1.20 | ColumnaccX25PvcBase | read-write | mandatory | Lowest LCID to be used for PVCs. |
| 1.3.6.1.4.1.5.1.1.17.3.1.21 | ColumnaccX25PvcNumber | read-write | mandatory | Maximum number of PVCs. |
| 1.3.6.1.4.1.5.1.1.17.3.1.22 | ColumnaccX25Tx0Timer | read-write | mandatory | Value for T10 (DCE) or T20 (DTE) timer. |
| 1.3.6.1.4.1.5.1.1.17.3.1.23 | ColumnaccX25Tx1Timer | read-write | mandatory | Value for T11 (DCE) or T21 (DTE) timer. |
| 1.3.6.1.4.1.5.1.1.17.3.1.24 | ColumnaccX25Tx2Timer | read-write | mandatory | Value for T12 (DCE) or T22 (DTE) timer. |
| 1.3.6.1.4.1.5.1.1.17.3.1.25 | ColumnaccX25Tx3Timer | read-write | mandatory | Value for T13 (DCE) or T23 (DTE) timer. |
| 1.3.6.1.4.1.5.1.1.17.4 | TableaccX25PktStatTable | not-accessible | mandatory | Per-port packet statistics for X.25 interfaces. |
| 1.3.6.1.4.1.5.1.1.17.4.1 | RowaccX25PktStatEntry | not-accessible | mandatory | X.25 packet level statistics for an X.25 interface. |
| 1.3.6.1.4.1.5.1.1.17.4.1.1 | ColumnaccX25PktIndex | read-only | mandatory | Port number of this X.25 interface. |
| 1.3.6.1.4.1.5.1.1.17.4.1.2 | ColumnaccX25RcvDiags | read-only | mandatory | Number of Diagnostic packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.3 | ColumnaccX25RcvRestartReqs | read-only | mandatory | Number of Restart Request (Restart Indication) packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.4 | ColumnaccX25RcvRestartConfs | read-only | mandatory | Number of Restart Confirmation packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.5 | ColumnaccX25RcvCallReqs | read-only | mandatory | Number of Call Request (Incoming Call) packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.6 | ColumnaccX25RcvCallAccs | read-only | mandatory | Number of Call Accepted (Call Connected) packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.7 | ColumnaccX25RcvClrReqs | read-only | mandatory | Number of Clear Request (Clear Indication) packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.8 | ColumnaccX25RcvClrConfs | read-only | mandatory | Number of Clear Confirmation packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.9 | ColumnaccX25RcvResetReqs | read-only | mandatory | Number of Reset Request (Reset Indication) packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.10 | ColumnaccX25RcvResetConfs | read-only | mandatory | Number of Reset Confirmation packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.11 | ColumnaccX25RcvInts | read-only | mandatory | Number of Interrupt packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.12 | ColumnaccX25RcvIntConfs | read-only | mandatory | Number of Interrupt Confirmation packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.13 | ColumnaccX25RcvRRs | read-only | mandatory | Number of RR [Receive Ready] packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.14 | ColumnaccX25RcvRNRs | read-only | mandatory | Number of RNR [Receive Not Ready] packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.15 | ColumnaccX25RcvDatas | read-only | mandatory | Number of Data packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.16 | ColumnaccX25XmtDiags | read-only | mandatory | Number of Diagnostic packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.17 | ColumnaccX25XmtRestartReqs | read-only | mandatory | Number of Restart Request (Restart Indication) packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.18 | ColumnaccX25XmtRestartConfs | read-only | mandatory | Number of Restart Confirmation packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.19 | ColumnaccX25XmtCallReqs | read-only | mandatory | Number of Call Request (Incoming Call) packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.20 | ColumnaccX25XmtCallAccs | read-only | mandatory | Number of Call Accepted (Call Connected) packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.21 | ColumnaccX25XmtClrReqs | read-only | mandatory | Number of Clear Request (Clear Indication) packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.22 | ColumnaccX25XmtClrConfs | read-only | mandatory | Number of Clear Confirmation packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.23 | ColumnaccX25XmtResetReqs | read-only | mandatory | Number of Reset Request (Reset Indication) packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.24 | ColumnaccX25XmtResetConfs | read-only | mandatory | Number of Reset Confirmation packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.25 | ColumnaccX25XmtInts | read-only | mandatory | Number of Interrupt packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.26 | ColumnaccX25XmtIntConfs | read-only | mandatory | Number of Interrupt Confirmation packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.27 | ColumnaccX25XmtRRs | read-only | mandatory | Number of RR [Receive Ready] packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.28 | ColumnaccX25XmtRNRs | read-only | mandatory | Number of RNR [Receive Not Ready] packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.29 | ColumnaccX25XmtDatas | read-only | mandatory | Number of Data packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.30 | ColumnaccX25OpenSvcCounts | read-only | mandatory | Count of SVCs open on this port. |
| 1.3.6.1.4.1.5.1.1.17.5 | TableaccX25OptFacTable | not-accessible | mandatory | Optional facility string table. |
| 1.3.6.1.4.1.5.1.1.17.5.1 | RowaccX25OptFacEntry | not-accessible | mandatory | A single optional facility entry. |
| 1.3.6.1.4.1.5.1.1.17.5.1.1 | ColumnaccX25OptFacIndex | read-write | mandatory | Index of this entry in table [1..n]. |
| 1.3.6.1.4.1.5.1.1.17.5.1.2 | ColumnaccX25OptFacString | read-write | mandatory | facility string to be added when placing calls. |
| 1.3.6.1.4.1.5.1.1.17.6 | TableaccX25PvcAddrTable | not-accessible | mandatory | PVC to X.25 address mapping table. |
| 1.3.6.1.4.1.5.1.1.17.6.1 | RowaccX25PvcAddrEntry | not-accessible | mandatory | A single PVC to X.25 address mapping entry. |
| 1.3.6.1.4.1.5.1.1.17.6.1.1 | ColumnaccX25PvcLine | read-write | mandatory | Physical port for which this entry applies. Same is ifIndex. |
| 1.3.6.1.4.1.5.1.1.17.6.1.2 | ColumnaccX25PvcAddrLcid | read-write | mandatory | PVC logical channel ID . |
| 1.3.6.1.4.1.5.1.1.17.6.1.3 | ColumnaccX25PvcAddrString | read-write | mandatory | X.25 address to associate with this PVC. |
| 1.3.6.1.4.1.5.1.1.17.6.1.4 | ColumnaccX25PvcProtocol | read-write | mandatory | PVC Protocol Associated with this line and the LCID . |
| 1.3.6.1.4.1.5.1.1.17.7 | TableaccX25ErrorTable | not-accessible | mandatory | Error and exception logging table. |
| 1.3.6.1.4.1.5.1.1.17.7.1 | RowaccX25ErrorEntry | not-accessible | mandatory | A single error or exception item. |
| 1.3.6.1.4.1.5.1.1.17.7.1.1 | ColumnaccX25ErrorLine | read-only | mandatory | Physical port which encountered the error. |
| 1.3.6.1.4.1.5.1.1.17.7.1.2 | ColumnaccX25ErrorUpTime | read-only | mandatory | SysUpTime when error occurred. |
| 1.3.6.1.4.1.5.1.1.17.7.1.3 | ColumnaccX25ErrorSeq | read-only | mandatory | Unique cutter (for duplicate date/time). |
| 1.3.6.1.4.1.5.1.1.17.7.1.4 | ColumnaccX25ErrorState | read-write | mandatory | Etnry status. |
| 1.3.6.1.4.1.5.1.1.17.7.1.5 | ColumnaccX25ErrorProtocol | read-only | mandatory | Protocol which encountered the error. |
| 1.3.6.1.4.1.5.1.1.17.7.1.6 | ColumnaccX25ErrorCause | read-only | mandatory | Cause octet from close packet. |
| 1.3.6.1.4.1.5.1.1.17.7.1.7 | ColumnaccX25ErrorDiag | read-only | mandatory | Diagnostic octet from close packet. |
| 1.3.6.1.4.1.5.1.1.17.7.1.8 | ColumnaccX25ErrorPacket | read-only | mandatory | Packet that triggered the log entry (if available). |
| 1.3.6.1.4.1.5.1.1.17.8 | NodeaccX25Switch | |||
| 1.3.6.1.4.1.5.1.1.17.8.1 | ScalaraccX25SwitchStatus | read-write | mandatory | This Object controls whether X.25 switching is enabled or disabled. |
| 1.3.6.1.4.1.5.1.1.17.8.2 | ScalaraccX25SwitchConnections | read-only | mandatory | This Object indicates the current number of X.25 connections that are being switched through this router. |
| 1.3.6.1.4.1.5.1.1.17.8.3 | ScalaraccX25SwitchCallSucceeds | read-only | mandatory | This Object indicates the total number of X.25 calls that have been switched by this router. |
| 1.3.6.1.4.1.5.1.1.17.8.4 | ScalaraccX25SwitchCallFails | read-only | mandatory | This Object indicates the total number of X.25 calls that this router has been unable to switch. |
| 1.3.6.1.4.1.5.1.1.17.8.5 | TableaccX25SwitchConnTable | not-accessible | mandatory | This Table contains objects which report information about the X.25 calls currently being switched through this router. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1 | RowaccX25SwitchConnEntry | not-accessible | mandatory | The entry part of accX25SwitchConnTable. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.1 | ColumnaccX25SwitchConnCallingIfIndex | read-only | mandatory | An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface which initiated the connection. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.2 | ColumnaccX25SwitchConnCallingIndex | read-only | mandatory | An Integer that uniquely identifies the virtual circuit for the initiating interface. For X.25 ports, this will be the LCN. For the TCP ports, this will be the… |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.3 | ColumnaccX25SwitchConnCallingType | read-only | mandatory | An integer that indicates the calling type. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.4 | ColumnaccX25SwitchConnCallingX121Addr | read-only | mandatory | A string that contains the Calling X.121 address that initiated the connection. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.5 | ColumnaccX25SwitchConnCallingPkts | read-only | mandatory | A counter which keeps track of the number of packets sent from the calling to the called port. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.6 | ColumnaccX25SwitchConnCallingOctets | read-only | mandatory | A counter which keeps track of the number of octets sent from the calling to the called port. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.7 | ColumnaccX25SwitchConnCalledIfIndex | read-only | mandatory | An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface which propagated the connection. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.8 | ColumnaccX25SwitchConnCalledIndex | read-only | mandatory | An Integer that uniquely identifies the virtual circuit for the outgoing interface. For X.25 ports, this will be the LCN. For the TCP ports, this will be the l… |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.9 | ColumnaccX25SwitchConnCalledType | read-only | mandatory | An integer that indicates the called type. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.10 | ColumnaccX25SwitchConnCalledX121Addr | read-only | mandatory | A string that contains the Called X.121 address that initiated the connection. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.11 | ColumnaccX25SwitchConnCalledPkts | read-only | mandatory | A counter which keeps track of the number of packets sent from the calling to the called port. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.12 | ColumnaccX25SwitchConnCalledOctets | read-only | mandatory | A counter which keeps track of the number of octets sent from the calling to the called port. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.13 | ColumnaccX25SwitchConnState | read-only | mandatory | An integer that indicates the state of the switched X.25 circuit. |
| 1.3.6.1.4.1.5.1.1.17.8.6 | TableaccX25SwitchAddrTransTable | not-accessible | mandatory | This Table contains objects which control the translation of X.121 addresses. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1 | RowaccX25SwitchAddrTransEntry | not-accessible | mandatory | The entry part for the AddrTrans Table. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.1 | ColumnaccX25SwitchAddrTransIfIndex | read-write | mandatory | An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface that receives the call request. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.2 | ColumnaccX25SwitchAddrTransDir | read-write | mandatory | An Integer that identifies whether this entry applies to inbound or to outbound switched X.25 calls. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.3 | ColumnaccX25SwitchAddrTransType | read-write | mandatory | An Integer that identifies whether this entry applies to called or to calling X.121 addresses. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.4 | ColumnaccX25SwitchAddrTransPattern | read-write | mandatory | A character string which defines the matching pattern for incoming called X.121 addresses. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.5 | ColumnaccX25SwitchAddrTransReplace | read-write | mandatory | A character string which defines the replacement pattern for incoming called X.121 addresses. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.6 | ColumnaccX25SwitchAddrTransStatus | read-write | mandatory | An Integer that defines the status of the table row. |
| 1.3.6.1.4.1.5.1.1.17.8.7 | TableaccX25SwitchRouteTable | not-accessible | mandatory | This Table contains objects which determine the switching of incoming X.25 calls. |
| 1.3.6.1.4.1.5.1.1.17.8.7.1 | RowaccX25SwitchRouteEntry | not-accessible | mandatory | The entry part for the Route Table. |
| 1.3.6.1.4.1.5.1.1.17.8.7.1.1 | ColumnaccX25SwitchRoutePattern | read-write | mandatory | A character string which defines the matching pattern for the incoming called X.121 addresses. |
| 1.3.6.1.4.1.5.1.1.17.8.7.1.2 | ColumnaccX25SwitchRouteIfIndex | read-write | mandatory | An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface which receives the call request. |
| 1.3.6.1.4.1.5.1.1.17.8.7.1.3 | ColumnaccX25SwitchRouteStatus | read-write | mandatory | An Integer that defines the status of the table row. |
| 1.3.6.1.4.1.5.1.1.17.8.8 | TableaccX25SwitchExtRtTable | not-accessible | mandatory | This Table contains an extended set of objects which determine the switching of incoming X.25 calls. |
| 1.3.6.1.4.1.5.1.1.17.8.8.1 | RowaccX25SwitchExtRtEntry | not-accessible | mandatory | The entry part for the Extended Route Table. |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.1 | ColumnaccX25SwitchExtRtIndex | read-write | mandatory | An Integer that uniquely identifies this row of the Extended Switching Table. |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.2 | ColumnaccX25SwitchExtRtIfIn | read-write | mandatory | An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface which receives the call request. This column must mat… |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.3 | ColumnaccX25SwitchExtRtAddr | read-write | mandatory | A character string which defines the matching pattern for the incoming called X.121 addresses. |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.4 | ColumnaccX25SwitchExtRtCUD | read-write | mandatory | A octet string which defines the matching pattern for the incoming Call User Data. A zero length octet string matches any Call User Data contents (including no… |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.5 | ColumnaccX25SwitchExtRtDisp | read-write | mandatory | An Integer that specifies the disposition of incoming calls that match this table entry. A value of 'switch' causes matching calls to be switched out the inter… |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.6 | ColumnaccX25SwitchExtRtIfOut | read-write | mandatory | An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface to which the call will be switched. This column is on… |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.7 | ColumnaccX25SwitchExtRtStatus | read-write | mandatory | An Integer that defines the status of the table row. |
| 1.3.6.1.4.1.5.1.1.18 | NodeaccIpFilter | |||
| 1.3.6.1.4.1.5.1.1.18.1 | ScalaraccIpSrcRouting | read-write | mandatory | Source Routing mode |
| 1.3.6.1.4.1.5.1.1.18.2 | TableaccIpFiltTable | not-accessible | deprecated | List of IP filters Entries added/deleted by management action. Setting any object to NULL deletes the entry |
| 1.3.6.1.4.1.5.1.1.18.2.1 | RowaccIpFiltEntry | not-accessible | deprecated | Specific IP filter |
| 1.3.6.1.4.1.5.1.1.18.2.1.1 | ColumnaccIpFiltDAddr | read-write | deprecated | Destination Address |
| 1.3.6.1.4.1.5.1.1.18.2.1.2 | ColumnaccIpFiltDNetMask | read-write | deprecated | Destination Network Mask |
| 1.3.6.1.4.1.5.1.1.18.2.1.3 | ColumnaccIpFiltSAddr | read-write | deprecated | Source Address |
| 1.3.6.1.4.1.5.1.1.18.2.1.4 | ColumnaccIpFiltSNetMask | read-write | deprecated | Source Network Mask |
| 1.3.6.1.4.1.5.1.1.18.2.1.5 | ColumnaccIpFiltParm | read-write | deprecated | Filter parameters; Byte 0 is Operation 1 [0,1,2] = [None, !,=] Bytes 1,2 is Protocol Byte 3 is Operation 2 [0 = none [1,2,3,4] = both [!, <, >, =] [5,6,7,8] = … |
| 1.3.6.1.4.1.5.1.1.18.2.1.6 | ColumnaccIpFiltDisp | read-write | deprecated | Disposition of packets meeting the filter criteria. Packets not discarded will be output with the selected relative transmission priority. normalPriority(0), d… |
| 1.3.6.1.4.1.5.1.1.18.4 | ScalaroIpSubDirBcast | read-write | mandatory | Packets with an all-ones host portion of the destination IP address are called Subnet Directed Broadcast (or Limited Broadcast) packets. This object selects if… |
| 1.3.6.1.4.1.5.1.1.18.5 | TableaccIpIfFiltDispTable | not-accessible | mandatory | List of revised IP filters which add support for filtering by source or destination interface. |
| 1.3.6.1.4.1.5.1.1.18.5.1 | RowaccIpIfFiltDispEntry | not-accessible | mandatory | An entry in the revised IP filter table. |
| 1.3.6.1.4.1.5.1.1.18.5.1.1 | ColumnaccIpIfFiltDispIfIndex | read-only | mandatory | Interface index to which this filter applies, or zero for global filters. This integer identifies the row of the system wide interfaces table associated with t… |
| 1.3.6.1.4.1.5.1.1.18.5.1.2 | ColumnaccIpIfFiltDispPktDir | read-only | mandatory | Stream direction to which filter is applied. Input and Output require an interface to be specified. Global indicates all interfaces and both directions. Input … |
| 1.3.6.1.4.1.5.1.1.18.5.1.3 | ColumnaccIpIfFiltDispSeqNum | read-only | mandatory | An internally generated sequence number used to allow the Filter display table to be retruned in the order the filters are applied (most specific to least spec… |
| 1.3.6.1.4.1.5.1.1.18.5.1.4 | ColumnaccIpIfFiltDispDAddr | read-only | mandatory | Destination Address |
| 1.3.6.1.4.1.5.1.1.18.5.1.5 | ColumnaccIpIfFiltDispDNetMask | read-only | mandatory | Destination Network Mask |
| 1.3.6.1.4.1.5.1.1.18.5.1.6 | ColumnaccIpIfFiltDispSAddr | read-only | mandatory | Source Address |
| 1.3.6.1.4.1.5.1.1.18.5.1.7 | ColumnaccIpIfFiltDispSNetMask | read-only | mandatory | Source Network Mask |
| 1.3.6.1.4.1.5.1.1.18.5.1.8 | ColumnaccIpIfFiltDispOp1 | read-only | mandatory | Logical operation to be performed on the next object/parameter (protocol). If 'none', the filter will match any protocol. |
| 1.3.6.1.4.1.5.1.1.18.5.1.9 | ColumnaccIpIfFiltDispProtocol | read-only | mandatory | Ip protocol on which to filter. |
| 1.3.6.1.4.1.5.1.1.18.5.1.10 | ColumnaccIpIfFiltDispOp2 | read-only | mandatory | Logical operation to be performed on the next object/parameter (port). |
| 1.3.6.1.4.1.5.1.1.18.5.1.11 | ColumnaccIpIfFiltDispUDPTCPPort | read-only | mandatory | The UDP or TCP port number to which the previous logical operation is to apply. |
| 1.3.6.1.4.1.5.1.1.18.5.1.12 | ColumnaccIpIfFiltDispDispos | read-only | mandatory | Disposition of packets meeting the filter criteria. Packets not discarded will be output with the selected relative transmission priority. The log option cause… |
| 1.3.6.1.4.1.5.1.1.18.5.1.13 | ColumnaccIpIfFiltDispMatches | read-only | mandatory | The number of times this filter criteria has been applied. |
| 1.3.6.1.4.1.5.1.1.18.5.1.14 | ColumnaccIpIfFiltDispLastMatchTime | read-only | mandatory | The value of sysUpTime the last time this filter was applied. |
| 1.3.6.1.4.1.5.1.1.18.5.1.15 | ColumnaccIpIfFiltDispMatchPkt | read-only | mandatory | This object is used exclusivley for returning information in a trap about the last packet that was filtered. A query of this object will return an octet string… |
| 1.3.6.1.4.1.5.1.1.18.6 | TableaccIpIfFiltEditTable | not-accessible | mandatory | A transient table which is used to create/delete /modify an entry in the IP filter database. |
| 1.3.6.1.4.1.5.1.1.18.6.1 | RowaccIpIfFiltEditEntry | not-accessible | mandatory | An entry in the revised IP filter table. |
| 1.3.6.1.4.1.5.1.1.18.6.1.1 | ColumnaccIpIfFiltEditIndex | read-only | mandatory | An arbitrary number assigned to the record that is currently being edited. |
| 1.3.6.1.4.1.5.1.1.18.6.1.2 | ColumnaccIpIfFiltEditAction | read-write | mandatory | The action to be performed with this record. In the future the field 'pending' may be added. |
| 1.3.6.1.4.1.5.1.1.18.6.1.3 | ColumnaccIpIfFiltEditIfIndex | read-write | mandatory | Interface index to which this filter applies, or zero for global filters. This integer identifies the row of the system wide interfaces table associated with t… |
| 1.3.6.1.4.1.5.1.1.18.6.1.4 | ColumnaccIpIfFiltEditPktDir | read-write | mandatory | Stream direction to which filter is applied. Input and Output require an interface to be specified. Global indicates all interfaces and both directions. Input … |
| 1.3.6.1.4.1.5.1.1.18.6.1.5 | ColumnaccIpIfFiltEditDAddr | read-write | mandatory | Destination Address |
| 1.3.6.1.4.1.5.1.1.18.6.1.6 | ColumnaccIpIfFiltEditDNetMask | read-write | mandatory | Destination Network Mask |
| 1.3.6.1.4.1.5.1.1.18.6.1.7 | ColumnaccIpIfFiltEditSAddr | read-write | mandatory | Source Address |
| 1.3.6.1.4.1.5.1.1.18.6.1.8 | ColumnaccIpIfFiltEditSNetMask | read-write | mandatory | Source Network Mask |
| 1.3.6.1.4.1.5.1.1.18.6.1.9 | ColumnaccIpIfFiltEditOp1 | read-write | mandatory | Logical operation to be performed on the next object/parameter (protocol). If 'none', the filter will match any protocol. |
| 1.3.6.1.4.1.5.1.1.18.6.1.10 | ColumnaccIpIfFiltEditProtocol | read-write | mandatory | Ip protocol on which to filter. |
| 1.3.6.1.4.1.5.1.1.18.6.1.11 | ColumnaccIpIfFiltEditOp2 | read-write | mandatory | Logical operation to be performed on the next object/parameter (port). |
| 1.3.6.1.4.1.5.1.1.18.6.1.12 | ColumnaccIpIfFiltEditUDPTCPPort | read-write | mandatory | The UDP or TCP port number to which the previous logical operation is to apply. |
| 1.3.6.1.4.1.5.1.1.18.6.1.13 | ColumnaccIpIfFiltEditDispos | read-write | mandatory | Disposition of packets meeting the filter criteria. Packets not discarded will be output with the selected relative transmission priority. The log option cause… |
| 1.3.6.1.4.1.5.1.1.19 | NodeaccDn | |||
| 1.3.6.1.4.1.5.1.1.19.1 | ScalaraccDnNumber | read-only | mandatory | Number of DECNET circuits |
| 1.3.6.1.4.1.5.1.1.19.2 | ScalaraccDnID | read-write | mandatory | Node ID; Least 10 bits identify the node, six bits above that identify the area. |
| 1.3.6.1.4.1.5.1.1.19.3 | ScalaraccDnMaxNode | read-write | mandatory | Maximum node number permitted in the local area |
| 1.3.6.1.4.1.5.1.1.19.4 | ScalaraccDnMaxArea | read-write | mandatory | Maximum area number permitted |
| 1.3.6.1.4.1.5.1.1.19.5 | ScalaraccDnMaxAdjRtr | read-write | mandatory | Maximum number of adjacent routers |
| 1.3.6.1.4.1.5.1.1.19.6 | ScalaraccDnMaxEndNode | read-write | mandatory | Maximum number of broadcast endnode adjacencies |
| 1.3.6.1.4.1.5.1.1.19.7 | ScalaraccDnMaxLocHop | read-write | mandatory | Maximum number of hops allowed within this area |
| 1.3.6.1.4.1.5.1.1.19.8 | ScalaraccDnMaxLocCost | read-write | mandatory | Maximum cost allowed on a path within this area |
| 1.3.6.1.4.1.5.1.1.19.9 | ScalaraccDnMaxVisit | read-write | mandatory | Maximum number of node visits allowed for a packet |
| 1.3.6.1.4.1.5.1.1.19.10 | ScalaraccDnMaxForHop | read-write | mandatory | Maximum number of hops allowed to another area |
| 1.3.6.1.4.1.5.1.1.19.11 | ScalaraccDnMaxForCost | read-write | mandatory | Maximum cost allowed on a path to another area |
| 1.3.6.1.4.1.5.1.1.19.12 | ScalaraccDnBCT1 | read-write | mandatory | Interval between retranmissions of routing database updates on Broadcast Address |
| 1.3.6.1.4.1.5.1.1.19.13 | ScalaraccDnT1 | read-write | mandatory | Interval between retranmissions of routing database updates non-broadcast |
| 1.3.6.1.4.1.5.1.1.19.14 | ScalaraccDnMsgLev | read-write | mandatory | Message level for generation of trap messages describing DECNET operational phenonomena See Trap level for description |
| 1.3.6.1.4.1.5.1.1.19.15 | ScalaraccDnNodeState | read-write | mandatory | Operational state of the node |
| 1.3.6.1.4.1.5.1.1.19.16 | ScalaraccDnUnreachs | read-only | mandatory | Packets dropped due to node unreachable |
| 1.3.6.1.4.1.5.1.1.19.17 | ScalaraccDnVisitXcds | read-only | mandatory | Packets dropped due to visits exceeded |
| 1.3.6.1.4.1.5.1.1.19.18 | ScalaraccDnBadNodes | read-only | mandatory | Packets dropped due to illegal node number |
| 1.3.6.1.4.1.5.1.1.19.19 | ScalaraccDnPktOsizes | read-only | mandatory | Packets dropped due to oversize packet |
| 1.3.6.1.4.1.5.1.1.19.20 | ScalaraccDnFmtErrs | read-only | mandatory | Packets dropped due to packet format error |
| 1.3.6.1.4.1.5.1.1.19.21 | TableaccDnCktTable | not-accessible | mandatory | DECnet circuit table Entries are added/deleted via management action. |
| 1.3.6.1.4.1.5.1.1.19.21.1 | RowaccDnCktEntry | not-accessible | mandatory | The instance of an entry is the circuit number. Existing entries can be modified. |
| 1.3.6.1.4.1.5.1.1.19.21.1.1 | ColumnaccDnCktIndex | read-write | mandatory | Circuit number |
| 1.3.6.1.4.1.5.1.1.19.21.1.2 | ColumnaccDnCktStatus | read-write | mandatory | Administrative DECNET state of this circuit |
| 1.3.6.1.4.1.5.1.1.19.21.1.3 | ColumnaccDnCktState | read-only | mandatory | Operational DECNET state of this circuit |
| 1.3.6.1.4.1.5.1.1.19.21.1.4 | ColumnaccDnCktCost | read-write | mandatory | Administrative circuit cost Object will be set to a circuit-type dependent value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.5 | ColumnaccDnMaxRtr | read-write | mandatory | Maximum number of routers that can be communicated with over this circuit |
| 1.3.6.1.4.1.5.1.1.19.21.1.6 | ColumnaccDnHelloInt | read-write | mandatory | Interval between transmission of Router Hello messages to other DECNET routers on this circuit |
| 1.3.6.1.4.1.5.1.1.19.21.1.7 | ColumnaccDnRtrPriority | read-write | mandatory | Priority of this Decnet router to become designated router on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.8 | ColumnaccDnDesRtrId | read-only | mandatory | ID of router which is designated router on this circuit. Lower 10 bits is node number, six bits above that are area number. |
| 1.3.6.1.4.1.5.1.1.19.21.1.9 | ColumnaccDnDesRtrPrio | read-only | mandatory | Priority of router which is designated router on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.10 | ColumnaccDnTrnPktRecs | read-only | mandatory | Number of transit packets received on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.11 | ColumnaccDnTrnPktSnds | read-only | mandatory | Number of transit packets sent on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.12 | ColumnaccDnEndNodePktRecs | read-only | mandatory | Number of end-node packets received on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.13 | ColumnaccDnEndNodePktSnds | read-only | mandatory | Number of end-node packets sent on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.14 | ColumnaccDnCktDowns | read-only | mandatory | Number of circuit down events noted on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.15 | ColumnaccDnCktType | read-write | mandatory | Circuit type Object required in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.16 | ColumnaccDnCktPort | read-write | mandatory | Physical port that this circuit is on Object required in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.17 | ColumnaccDnX25InOutAddr | read-write | mandatory | X25 address for other end of circuit; we'll send to this address and will accept packets from this address for this circuit. Object required in entry-adding SE… |
| 1.3.6.1.4.1.5.1.1.19.21.1.18 | ColumnaccDnX25InAddr | read-write | mandatory | Packets from this address are accepted on this circuit. Object will be set to default value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.19 | ColumnaccDnX25Idle | read-write | mandatory | Maximum idle time before this circuit is considered unused. Object will be set to default value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.20 | ColumnaccDnX25PktVal | read-write | mandatory | Maximum X25 packet size Object will be set to default value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.21 | ColumnaccDnX25PktWin | read-write | mandatory | X25 packet window Object will be set to default value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.22 | ColumnaccDnEntryStatus | read-write | mandatory | Setting this object to invalid deletes entry |
| 1.3.6.1.4.1.5.1.1.19.21.1.23 | ColumnaccDnX25FacIndex | read-write | mandatory | Index of optional facility string or 0. |
| 1.3.6.1.4.1.5.1.1.19.22 | TableaccDnRtTable | not-accessible | mandatory | DECnet routing table |
| 1.3.6.1.4.1.5.1.1.19.22.1 | RowaccDnRtEntry | not-accessible | mandatory | Detail on specific route |
| 1.3.6.1.4.1.5.1.1.19.22.1.1 | ColumnaccDnRtNode | read-only | mandatory | Destination node |
| 1.3.6.1.4.1.5.1.1.19.22.1.2 | ColumnaccDnRtHops | read-only | mandatory | Number of hops to destination |
| 1.3.6.1.4.1.5.1.1.19.22.1.3 | ColumnaccDnRtCost | read-only | mandatory | Cost to destination |
| 1.3.6.1.4.1.5.1.1.19.22.1.4 | ColumnaccDnRtCkt | read-only | mandatory | Circuit number to use to get to destination |
| 1.3.6.1.4.1.5.1.1.19.22.1.5 | ColumnaccDnRtNextHop | read-only | mandatory | Next router along the way to destination |
| 1.3.6.1.4.1.5.1.1.19.23 | TableaccDnAreaTable | not-accessible | mandatory | DECnet area table. |
| 1.3.6.1.4.1.5.1.1.19.23.1 | RowaccDnAreaEntry | not-accessible | mandatory | Details on specific area |
| 1.3.6.1.4.1.5.1.1.19.23.1.1 | ColumnaccDnAreaArea | read-only | mandatory | Remote area |
| 1.3.6.1.4.1.5.1.1.19.23.1.2 | ColumnaccDnAreaHops | read-only | mandatory | Hops to Remote area |
| 1.3.6.1.4.1.5.1.1.19.23.1.3 | ColumnaccDnAreaCost | read-only | mandatory | Cost to Remote area |
| 1.3.6.1.4.1.5.1.1.19.23.1.4 | ColumnaccDnAreaCkt | read-only | mandatory | Circuit over which remote area can be reached. |
| 1.3.6.1.4.1.5.1.1.19.23.1.5 | ColumnaccDnAreaNextHop | read-only | mandatory | Next hop to remote area. |
| 1.3.6.1.4.1.5.1.1.19.24 | TableaccDnRouteFilterTable | not-accessible | mandatory | The DECNET IV Routes that the Network Manager wants to be careful about. |
| 1.3.6.1.4.1.5.1.1.19.24.1 | RowaccDnRouteFilterEntry | not-accessible | mandatory | A single controlled DECNET Route. |
| 1.3.6.1.4.1.5.1.1.19.24.1.1 | ColumnaccDnRouteFilterAdj | read-write | mandatory | If 0, all adjacent systems. If a DECNET Area with host id 0, all adjacent systems in that area. If a DECNET Host ID, that adjacent system. |
| 1.3.6.1.4.1.5.1.1.19.24.1.2 | ColumnaccDnRouteFilterNode | read-write | mandatory | If 0, all routing information. If a DECNET Area with Host ID 0, relevant level 2 routing information. If a DECNET Host ID, level 1 routing informa- tion for th… |
| 1.3.6.1.4.1.5.1.1.19.24.1.3 | ColumnaccDnRouteFilterDisposition | read-write | mandatory | This variable indicates what to do with the indicated routing information. Where overlaps occur ('accept no routing information from area 3.0 except from route… |
| 1.3.6.1.4.1.5.1.1.19.24.1.4 | ColumnaccDnRouteFilterEntStat | read-write | mandatory | setting this variable to 'invalid' has the ef- fect of invalidating it as of the next system reset. |
| 1.3.6.1.4.1.5.1.1.19.25 | TableaccDnForwardFilterTable | not-accessible | mandatory | The DECNET traffic that the Network Manager wants selectively treated. |
| 1.3.6.1.4.1.5.1.1.19.25.1 | RowaccDnForwardFilterEntry | not-accessible | mandatory | A single set of messages that the Network Manager wants selectively treated. |
| 1.3.6.1.4.1.5.1.1.19.25.1.1 | ColumnaccDnForwardFilterDest | read-write | mandatory | If 0, all DECNET Addresses. If an Area with Host Part 0, all traffic to that Area. If a DECNET Host ID, all traffic to that Host. |
| 1.3.6.1.4.1.5.1.1.19.25.1.2 | ColumnaccDnForwardFilterSource | read-write | mandatory | If 0, all DECNET Traffic. If an Area with Host Part 0, all traffic from that Area. If a DECNET Host ID, all traffic from that Host. |
| 1.3.6.1.4.1.5.1.1.19.25.1.3 | ColumnaccDnForwardFilterDisposition | read-write | mandatory | This variable indicates what is to be done with traffic from accDnForwardFilterSource to accDnForwardFilterDest. When overlaps occur ('discard all traffic from… |
| 1.3.6.1.4.1.5.1.1.19.25.1.4 | ColumnaccDnForwardFilterEntStat | read-write | mandatory | setting accDnForwardFilterEntStat to invalid has the effect of removing the filter on the next system reset. |
| 1.3.6.1.4.1.5.1.1.19.26 | TableaccDnAdjTable | not-accessible | mandatory | The set of systems adjacent to this router. |
| 1.3.6.1.4.1.5.1.1.19.26.1 | RowaccDnAdjEntry | not-accessible | mandatory | One of the systems adjacent to this router. |
| 1.3.6.1.4.1.5.1.1.19.26.1.1 | ColumnaccDnAdjNode | read-only | mandatory | The Host Identifier of the adjacent node. |
| 1.3.6.1.4.1.5.1.1.19.26.1.2 | ColumnaccDnAdjType | read-only | mandatory | The type of DECNET adjacency being sustained. |
| 1.3.6.1.4.1.5.1.1.19.26.1.3 | ColumnaccDnAdjCircuit | read-only | mandatory | The DECNET Circuit Number. |
| 1.3.6.1.4.1.5.1.1.19.26.1.4 | ColumnaccDnAdjState | read-only | mandatory | The state of the adjacency. |
| 1.3.6.1.4.1.5.1.1.20 | NodeaccFr | |||
| 1.3.6.1.4.1.5.1.1.20.1 | TableaccFrAtTable | not-accessible | mandatory | Internet address translation table for Frame Relay interfaces. Entries are added/deleted via management action. |
| 1.3.6.1.4.1.5.1.1.20.1.1 | RowaccFrAtEntry | not-accessible | mandatory | Internet address translation entry for Frame Relay interfaces. |
| 1.3.6.1.4.1.5.1.1.20.1.1.1 | ColumnaccFrAtIfIndex | read-write | mandatory | Interface number (ifIndex) for which this translation entry is valid. Object required in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.20.1.1.2 | ColumnaccFrIpAddress | read-write | mandatory | IP Address Object required in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.20.1.1.3 | ColumnaccFrDLCI | read-write | mandatory | Frame Relay DLCI to use for the specified host Object required in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.20.1.1.4 | ColumnaccFrStatus | read-write | mandatory | Status of this entry Object required in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.20.2 | TableaccFrStatTable | not-accessible | mandatory | Per-line statistics for Frame Relay interfaces |
| 1.3.6.1.4.1.5.1.1.20.2.1 | RowaccFrStatEntry | not-accessible | mandatory | Frame Relay statistics |
| 1.3.6.1.4.1.5.1.1.20.2.1.1 | ColumnaccFrIndex | read-only | mandatory | Physical Port number of this Frame Relay interface. |
| 1.3.6.1.4.1.5.1.1.20.2.1.2 | ColumnaccFrStatRcvDrops | read-only | mandatory | Number of received frames that were discarded due to lack of resources. |
| 1.3.6.1.4.1.5.1.1.20.2.1.3 | ColumnaccFrStatShorts | read-only | mandatory | Number of received frames that were discarded because they were too short (DLCI and/or protocol field missing). |
| 1.3.6.1.4.1.5.1.1.20.2.1.4 | ColumnaccFrStatIllDlcis | read-only | mandatory | Number of received frames that were discarded because the DLCI was badly formed. |
| 1.3.6.1.4.1.5.1.1.20.2.1.5 | ColumnaccFrStatUnkDlcis | read-only | mandatory | Number of received frames that were discarded because the DLCI did not match any configured value. |
| 1.3.6.1.4.1.5.1.1.20.2.1.6 | ColumnaccFrStatUnkProtos | read-only | mandatory | Number of received frames that were discarded because the protocol field did not match any protocol configured for the specified DLCI. |
| 1.3.6.1.4.1.5.1.1.20.2.1.7 | ColumnaccFrStatRsrvDlcis | read-only | mandatory | Number of received frames whose DLCI had the reserved bit set. (The frame was not discarded; the frame was processed as though the reserved bit were clear). |
| 1.3.6.1.4.1.5.1.1.20.2.1.8 | ColumnaccFrStatXmtDrops | read-only | mandatory | Number of frames that could not be transmitted due to lack of resources. |
| 1.3.6.1.4.1.5.1.1.20.2.1.9 | ColumnaccFrStatErrTime | read-only | mandatory | System uptime when the last Frame Relay error was detected. |
| 1.3.6.1.4.1.5.1.1.20.2.1.10 | ColumnaccFrStatErrType | read-only | mandatory | Type of last detected Frame Relay error. |
| 1.3.6.1.4.1.5.1.1.20.2.1.11 | ColumnaccFrStatErrDlci | read-only | mandatory | Value of DLCI field from last detected Frame Relay error (00 00 if no DLCI was associated with the last error). |
| 1.3.6.1.4.1.5.1.1.20.2.1.12 | ColumnaccFrStatErrProto | read-only | mandatory | Value of protocol field from last detected Frame Relay error (0 if no protocol field was associated with the last error). |
| 1.3.6.1.4.1.5.1.1.20.2.1.13 | ColumnaccFrLinkState | read-only | mandatory | State of this Frame Relay link |
| 1.3.6.1.4.1.5.1.1.20.2.1.14 | ColumnaccFrStatUnks | read-only | mandatory | Unused object |
| 1.3.6.1.4.1.5.1.1.20.2.1.15 | ColumnaccFrStatRcvLongs | read-only | mandatory | Number of received dlcmi frames longer than expected. |
| 1.3.6.1.4.1.5.1.1.20.2.1.16 | ColumnaccFrStatIlgDlcis | read-only | mandatory | Unused object |
| 1.3.6.1.4.1.5.1.1.20.2.1.17 | ColumnaccFrStatProtoErrs | read-only | mandatory | Number of received frames with a protocol violation. |
| 1.3.6.1.4.1.5.1.1.20.2.1.18 | ColumnaccFrStatUnkIes | read-only | mandatory | Number of dlcmi frames received with an unknown Information element. |
| 1.3.6.1.4.1.5.1.1.20.2.1.19 | ColumnaccFrStatSeqErrs | read-only | mandatory | Number of dlcmi frames received with a sequence error. |
| 1.3.6.1.4.1.5.1.1.20.2.1.20 | ColumnaccFrStatUnkRpts | read-only | mandatory | Unused object |
| 1.3.6.1.4.1.5.1.1.20.3 | TableaccFrParmTable | not-accessible | mandatory | Frame Relay parameter table |
| 1.3.6.1.4.1.5.1.1.20.3.1 | RowaccFrParmEntry | not-accessible | mandatory | Frame Relay parameter entry |
| 1.3.6.1.4.1.5.1.1.20.3.1.1 | ColumnaccFrParmIndex | read-only | mandatory | Interface number |
| 1.3.6.1.4.1.5.1.1.20.3.1.2 | ColumnaccFrParmAddrFmt | read-write | mandatory | Addressing format used. Q.921 per spec. Ignores length parameter draft-Q922 per March, 1990 draft of Q.922 q922 per October, 1990 Q.922 specification |
| 1.3.6.1.4.1.5.1.1.20.3.1.3 | ColumnaccFrParmAddrLen | read-write | mandatory | Length of address on serial line |
| 1.3.6.1.4.1.5.1.1.20.3.1.4 | ColumnaccFrParmEncap | read-write | mandatory | Type of encapsulation used on serial line |
| 1.3.6.1.4.1.5.1.1.20.3.1.5 | ColumnaccFrDlcmiState | read-write | mandatory | This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame Relay interface. |
| 1.3.6.1.4.1.5.1.1.20.3.1.6 | ColumnaccFrDlcmiPollInt | read-write | mandatory | the number of seconds between successive status enquiry messages. |
| 1.3.6.1.4.1.5.1.1.20.3.1.7 | ColumnaccFrDlcmiFullStatEnq | read-write | mandatory | Number of status enquiry intervals that pass before issuance of a full status enquiry message. |
| 1.3.6.1.4.1.5.1.1.20.3.1.8 | ColumnaccFrDlcmiErrThres | read-write | mandatory | Maximum number of unanswered Status Enquiries the equipmemt shall accept before declaring the interface down. |
| 1.3.6.1.4.1.5.1.1.20.3.1.9 | ColumnaccFrDlcmiMonEvents | read-write | mandatory | Maximum number of responses to FULL STATUS or LINK INTEGRITY VERIFICATION messages missed before the device will mark the interface down. |
| 1.3.6.1.4.1.5.1.1.20.3.1.10 | ColumnaccFrDlcmiType | read-write | mandatory | Link Maintenance is assymmetrical, so one end must be user, the other network. Normally the bridge/router is user. |
| 1.3.6.1.4.1.5.1.1.20.3.1.11 | ColumnaccFrDlcmiIdleTimer | read-write | mandatory | Number of minutes without receiving any non-dlcmi frames before declaring the link idle. Setting the timer to 0 will disable it. |
| 1.3.6.1.4.1.5.1.1.20.4 | TableaccFrCktTable | not-accessible | mandatory | Frame Relay circuit table |
| 1.3.6.1.4.1.5.1.1.20.4.1 | RowaccFrCktEntry | not-accessible | mandatory | Frame Relay circuit table entry |
| 1.3.6.1.4.1.5.1.1.20.4.1.1 | ColumnaccFrCktIfIndex | read-only | mandatory | Interface on which this circuit exists |
| 1.3.6.1.4.1.5.1.1.20.4.1.2 | ColumnaccFrCktDlci | read-only | mandatory | Data Link Connection Identifier for this circuit. |
| 1.3.6.1.4.1.5.1.1.20.4.1.3 | ColumnaccFrCktState | read-only | mandatory | Indicates whether the particular circuit is operational. |
| 1.3.6.1.4.1.5.1.1.20.4.1.4 | ColumnaccFrCktFECNrcvds | read-only | mandatory | Number of frames received from the network in- dicating forward congestion since the circuit was created. |
| 1.3.6.1.4.1.5.1.1.20.4.1.5 | ColumnaccFrCktBECNrcvds | read-only | mandatory | Number of frames received from the network in- dicating backward congestion since the circuit was created. |
| 1.3.6.1.4.1.5.1.1.20.4.1.6 | ColumnaccFrCktFrameXmts | read-only | mandatory | Number of frames sent from this circuit since it was created. |
| 1.3.6.1.4.1.5.1.1.20.4.1.7 | ColumnaccFrCktOctetXmts | read-only | mandatory | Number of octets sent from this circuit since it was created. |
| 1.3.6.1.4.1.5.1.1.20.4.1.8 | ColumnaccFrCktFrameRcvs | read-only | mandatory | Number of frames received by this circuit since it was created. |
| 1.3.6.1.4.1.5.1.1.20.4.1.9 | ColumnaccFrCktOctetRcvs | read-only | mandatory | Number of octets received by this circuit since it was created. |
| 1.3.6.1.4.1.5.1.1.20.4.1.10 | ColumnaccFrCktCreateTime | read-only | mandatory | The value of sysUpTime when the circuit was created. |
| 1.3.6.1.4.1.5.1.1.20.4.1.11 | ColumnaccFrCktChangeTime | read-only | mandatory | The value of sysUpTime when last there was a change in the circuit state. |
| 1.3.6.1.4.1.5.1.1.20.4.1.12 | ColumnaccFfrCktLoop | read-write | mandatory | Indicates the loopback state of the virtual circuit. The object is normally 'normal', indicating that the circuit is in its normal operational state. If set to… |
| 1.3.6.1.4.1.5.1.1.20.5 | TableaccFfrSwitchParameterTable | not-accessible | mandatory | Frame Relay Switch Parameter table |
| 1.3.6.1.4.1.5.1.1.20.5.1 | RowaccFfrSwitchParameterEntry | not-accessible | mandatory | An entry in Frame Relay Switch Parameter table |
| 1.3.6.1.4.1.5.1.1.20.5.1.1 | ColumnaccFfrSwitchIfindex1 | read-write | mandatory | The first interface index in the entry |
| 1.3.6.1.4.1.5.1.1.20.5.1.2 | ColumnaccFfrSwitchDlci1 | read-write | mandatory | The first Frame Relay DLCI in the entry |
| 1.3.6.1.4.1.5.1.1.20.5.1.3 | ColumnaccFfrSwitchIfindex2 | read-write | mandatory | The second interface index in the entry |
| 1.3.6.1.4.1.5.1.1.20.5.1.4 | ColumnaccFfrSwitchDlci2 | read-write | mandatory | The second Frame Relay DLCI in the entry |
| 1.3.6.1.4.1.5.1.1.20.5.1.5 | ColumnaccFfrSwitchStatus | read-write | mandatory | The Status tells whether the traffic will be switched as per the entry. This object also is usedin the delete command |
| 1.3.6.1.4.1.5.1.1.21 | NodeaccXns | |||
| 1.3.6.1.4.1.5.1.1.21.1 | NodeaccXnsParms | |||
| 1.3.6.1.4.1.5.1.1.21.1.1 | ScalaraccXnsAdStat | read-write | mandatory | Administrative status of XNS routing protocol |
| 1.3.6.1.4.1.5.1.1.21.1.2 | ScalaraccXnsCkSum | read-write | mandatory | Checksumming of XNS protocol |
| 1.3.6.1.4.1.5.1.1.21.1.3 | ScalaraccXnsSpltHorz | read-write | mandatory | Split horizon mode of XNS protocol |
| 1.3.6.1.4.1.5.1.1.21.1.4 | ScalaraccXnsAllNets | read-write | mandatory | All nets mode |
| 1.3.6.1.4.1.5.1.1.21.1.5 | ScalaraccXnsMode | read-write | mandatory | RIP protocol type to use |
| 1.3.6.1.4.1.5.1.1.21.2 | TableaccXnsNetTable | not-accessible | mandatory | List of XNS Networks. Entries added/deleted by management action. |
| 1.3.6.1.4.1.5.1.1.21.2.1 | RowaccXnsNetEntry | not-accessible | mandatory | Information on specific network |
| 1.3.6.1.4.1.5.1.1.21.2.1.1 | ColumnaccXnsNetPort | read-write | mandatory | XNS logical port number |
| 1.3.6.1.4.1.5.1.1.21.2.1.2 | ColumnaccXnsNetNumber | read-write | mandatory | XNS network number |
| 1.3.6.1.4.1.5.1.1.21.2.1.3 | ColumnaccXnsNetType | read-write | mandatory | Type of network |
| 1.3.6.1.4.1.5.1.1.21.2.1.4 | ColumnaccXnsNetEncap | read-write | mandatory | LAN Encapsulation used (Ethernet). none(0), v2(1), raw(2), llc(3), snap(4) |
| 1.3.6.1.4.1.5.1.1.21.2.1.5 | ColumnaccXnsNetSlot | read-write | mandatory | Slot to which the network is attached |
| 1.3.6.1.4.1.5.1.1.21.2.1.6 | ColumnaccXnsNetAdStat | read-write | mandatory | Administrative status of network |
| 1.3.6.1.4.1.5.1.1.21.2.1.7 | ColumnaccXnsNetMtu | read-write | mandatory | Maximum packet size. Object will be defaulted to a network type dependent value if missing in set PDU which adds entries. |
| 1.3.6.1.4.1.5.1.1.21.2.1.8 | ColumnaccXnsNetUpdate | read-write | mandatory | Update interval |
| 1.3.6.1.4.1.5.1.1.21.2.1.9 | ColumnaccXnsNetHops | read-write | mandatory | Hop count |
| 1.3.6.1.4.1.5.1.1.21.2.1.10 | ColumnaccXnsNetCost | read-write | mandatory | Cost metric Object will be defaulted to network type dependent value if missing in set PDU which adds entries. |
| 1.3.6.1.4.1.5.1.1.21.2.1.11 | ColumnaccXnsNetX25InOutAddr | read-write | mandatory | X25 address to send to and to receive packets from. |
| 1.3.6.1.4.1.5.1.1.21.2.1.12 | ColumnaccXnsNetX25InAddr | read-write | mandatory | Receive-only X25 address Object not required in set PDU (defaults to In/Out address) |
| 1.3.6.1.4.1.5.1.1.21.2.1.13 | ColumnaccXnsNetX25Idle | read-write | mandatory | Time X25 connection can be idle before it is determined to be not busy. |
| 1.3.6.1.4.1.5.1.1.21.2.1.14 | ColumnaccXnsNetX25PktVal | read-write | mandatory | X25 packet size Object will be defaulted if missing in set PDU which adds entries. |
| 1.3.6.1.4.1.5.1.1.21.2.1.15 | ColumnaccXnsNetX25PktWin | read-write | mandatory | X25 packet window |
| 1.3.6.1.4.1.5.1.1.21.2.1.16 | ColumnaccXnsNetEntryStat | read-write | mandatory | Status of this table entry Set this object to invalid to remove entry from table |
| 1.3.6.1.4.1.5.1.1.21.2.1.17 | ColumnaccXnsNetUbUpdate | read-write | mandatory | Ungermann-Bass update interval Object will be defaulted if missing in set PDU which adds entries. |
| 1.3.6.1.4.1.5.1.1.21.2.1.18 | ColumnaccXnsNetUbTtl | read-write | mandatory | Ungermann-Bass time-to-live Object will be defaulted if missing in set PDU which adds entries. |
| 1.3.6.1.4.1.5.1.1.21.2.1.19 | ColumnaccXnsNetUbQT1 | read-write | mandatory | Ungermann-Bass QT1 timer Object will be defaulted to a network type dependent value if missing in set PDU which adds entries. |
| 1.3.6.1.4.1.5.1.1.21.2.1.20 | ColumnaccXnsNetUbQT2 | read-write | mandatory | Ungermann-Bass QT2 timer Object will be defaulted to a network type dependent value if missing in set PDU which adds entries. This object may be individually a… |
| 1.3.6.1.4.1.5.1.1.21.2.1.21 | ColumnaccXnsNetFncAddr | read-write | mandatory | The MAC-layer functional address for sending and receiving multicasts. |
| 1.3.6.1.4.1.5.1.1.21.2.1.22 | ColumnaccXnsNetSrMode | read-write | mandatory | The source-routing mode for token-ring networks. |
| 1.3.6.1.4.1.5.1.1.21.2.1.23 | ColumnaccXnsNetX25FacIndex | read-write | mandatory | Index of optional facility string or 0. |
| 1.3.6.1.4.1.5.1.1.21.2.1.24 | ColumnaccXnsNetDlci | read-write | mandatory | Frame Relay DLCI for this port |
| 1.3.6.1.4.1.5.1.1.21.3 | TableaccXnsRouteTable | not-accessible | mandatory | List of routes to other XNS networks |
| 1.3.6.1.4.1.5.1.1.21.3.1 | RowaccXnsRouteEntry | not-accessible | mandatory | Information on route to destination network |
| 1.3.6.1.4.1.5.1.1.21.3.1.1 | ColumnaccXnsRtDest | read-only | mandatory | Destination network. |
| 1.3.6.1.4.1.5.1.1.21.3.1.2 | ColumnaccXnsRtNxtNet | read-only | mandatory | The next network along the way to the destination network. |
| 1.3.6.1.4.1.5.1.1.21.3.1.3 | ColumnaccXnsRtRouter | read-only | mandatory | Router on next XNS network on route |
| 1.3.6.1.4.1.5.1.1.21.3.1.4 | ColumnaccXnsRtHops | read-only | mandatory | Number of hops to remote network |
| 1.3.6.1.4.1.5.1.1.21.3.1.5 | ColumnaccXnsRtCost | read-only | mandatory | Cost to remote network |
| 1.3.6.1.4.1.5.1.1.21.3.1.6 | ColumnaccXnsRtType | read-only | mandatory | Type of route |
| 1.3.6.1.4.1.5.1.1.21.3.1.7 | ColumnaccXnsRtOwner | read-only | mandatory | Source of route |
| 1.3.6.1.4.1.5.1.1.21.3.1.8 | ColumnaccXnsRtAge | read-only | mandatory | Age of route |
| 1.3.6.1.4.1.5.1.1.21.3.1.9 | ColumnaccXnsRtPort | read-only | mandatory | The logical port number through which packets will be forwarded to the destination network. |
| 1.3.6.1.4.1.5.1.1.21.4 | NodeaccXnsRipStat | |||
| 1.3.6.1.4.1.5.1.1.21.4.1 | ScalaraccXnsRipReqIns | read-only | mandatory | XNS RIP requests received |
| 1.3.6.1.4.1.5.1.1.21.4.2 | ScalaraccXnsRipRespIns | read-only | mandatory | XNS RIP responses received |
| 1.3.6.1.4.1.5.1.1.21.4.3 | ScalaraccXnsRipReqOuts | read-only | mandatory | XNS RIP requests transmitted |
| 1.3.6.1.4.1.5.1.1.21.4.4 | ScalaraccXnsRipRespOuts | read-only | mandatory | XNS RIP responses transmitted |
| 1.3.6.1.4.1.5.1.1.21.4.5 | ScalaraccXnsRipInErrs | read-only | mandatory | XNS RIP packets received with errors |
| 1.3.6.1.4.1.5.1.1.21.4.6 | ScalaraccXnsRipOutErrs | read-only | mandatory | XNS RIP responses transmitted with errors. |
| 1.3.6.1.4.1.5.1.1.21.5 | NodeaccXnsNodeStat | |||
| 1.3.6.1.4.1.5.1.1.21.5.1 | ScalaraccXnsLocalIns | read-only | mandatory | Packets received for local usage |
| 1.3.6.1.4.1.5.1.1.21.5.2 | ScalaraccXnsLocalOuts | read-only | mandatory | Locally generated packets |
| 1.3.6.1.4.1.5.1.1.21.5.3 | ScalaraccXnsNoSockets | read-only | mandatory | Packets received for which there was no socket |
| 1.3.6.1.4.1.5.1.1.21.5.4 | ScalaraccXnsNoRoutes | read-only | mandatory | Packets for which no route was found |
| 1.3.6.1.4.1.5.1.1.21.5.5 | ScalaraccXnsNodeInErrs | read-only | mandatory | The number of input packets discarded by this node because of some unspecified internal error. |
| 1.3.6.1.4.1.5.1.1.21.5.6 | ScalaraccXnsOutErrs | read-only | mandatory | Output errors |
| 1.3.6.1.4.1.5.1.1.21.5.7 | ScalaraccXnsAllNetsIns | read-only | mandatory | All-nets packets received |
| 1.3.6.1.4.1.5.1.1.21.5.8 | ScalaraccXnsAllNetsOuts | read-only | mandatory | All-nets packets transmitted |
| 1.3.6.1.4.1.5.1.1.21.5.9 | ScalaraccXnsAllNetsErrs | read-only | mandatory | Erroneous All-Nets packets encountered |
| 1.3.6.1.4.1.5.1.1.21.6 | TableaccXnsPortStatTable | not-accessible | mandatory | XNS Port statistics table |
| 1.3.6.1.4.1.5.1.1.21.6.1 | RowaccXnsPortStatEntry | not-accessible | mandatory | Per-port statistics |
| 1.3.6.1.4.1.5.1.1.21.6.1.1 | ColumnaccXnsPortNumber | read-only | mandatory | Port number |
| 1.3.6.1.4.1.5.1.1.21.6.1.2 | ColumnaccXnsPortTotalIns | read-only | mandatory | Total number of XNS Packets received |
| 1.3.6.1.4.1.5.1.1.21.6.1.3 | ColumnaccXnsPorFwdReqIns | read-only | mandatory | The number of input packets not addressed to the receiving port, as a result of which an attempt was made to find a route to forward them to the final destinat… |
| 1.3.6.1.4.1.5.1.1.21.6.1.4 | ColumnaccXnsPortNoFwdRts | read-only | mandatory | The number of packets received on this port for which no route to the destination network could be found. |
| 1.3.6.1.4.1.5.1.1.21.6.1.5 | ColumnaccXnsPortTotalOuts | read-only | mandatory | Total XNS packets transmitted |
| 1.3.6.1.4.1.5.1.1.21.6.1.6 | ColumnaccXnsPortHopCnts | read-only | mandatory | The number of packets received on this port whose hop count had reached the maximum value. |
| 1.3.6.1.4.1.5.1.1.21.6.1.7 | ColumnaccXnsPortNotForMes | read-only | mandatory | The number of packets received on this port which were addressed to another node on the same network. |
| 1.3.6.1.4.1.5.1.1.21.6.1.8 | ColumnaccXnsPortFwdReqOuts | read-only | mandatory | The number of packets received on this port which were successfully forwarded to another port. |
| 1.3.6.1.4.1.5.1.1.21.6.1.9 | ColumnaccXnsPortFwdErrs | read-only | mandatory | The number of packets received on this port which could not be forwarded, either because there were transmitted via a MAC-layer broadcast, or because their sou… |
| 1.3.6.1.4.1.5.1.1.21.6.1.10 | ColumnaccXnsPortInErrs | read-only | mandatory | The number of packets received on this port which were discarded because of some unspecified internal error. |
| 1.3.6.1.4.1.5.1.1.21.6.1.11 | ColumnaccXnsPortTooShorts | read-only | mandatory | The number of packets received on this port which were discarded because they were too short. |
| 1.3.6.1.4.1.5.1.1.21.6.1.12 | ColumnaccXnsPortCkSums | read-only | mandatory | XNS packet checksum errors detected |
| 1.3.6.1.4.1.5.1.1.21.6.1.13 | ColumnaccXnsPortTooLongs | read-only | mandatory | The number of packets received on this port which were discarded because they were too long. |
| 1.3.6.1.4.1.5.1.1.21.6.1.14 | ColumnaccXnsPortOutErrs | read-only | mandatory | XNS packet output errors detected |
| 1.3.6.1.4.1.5.1.1.21.6.1.15 | ColumnaccXnsPortOpState | read-only | mandatory | Operational status of this port. off(0), down(1), start(2), stop(3), up(4) |
| 1.3.6.1.4.1.5.1.1.21.7 | TableaccXnsUbNbrTable | not-accessible | mandatory | XNS Neighbor table (Ungermann-Bass) |
| 1.3.6.1.4.1.5.1.1.21.7.1 | RowaccXnsUbNbrEntry | not-accessible | mandatory | Information on specific neighbor. |
| 1.3.6.1.4.1.5.1.1.21.7.1.1 | ColumnaccXnsUbnRmtNet | read-only | mandatory | Remote network |
| 1.3.6.1.4.1.5.1.1.21.7.1.2 | ColumnaccXnsUbnLclNet | read-only | mandatory | Local network |
| 1.3.6.1.4.1.5.1.1.21.7.1.3 | ColumnaccXnsUbnRouter | read-only | mandatory | Router |
| 1.3.6.1.4.1.5.1.1.21.7.1.4 | ColumnaccXnsUbnHops | read-only | mandatory | Hop count to neighbor |
| 1.3.6.1.4.1.5.1.1.21.7.1.5 | ColumnaccXnsUbnCost | read-only | mandatory | Cost to neighbor |
| 1.3.6.1.4.1.5.1.1.21.7.1.6 | ColumnaccXnsUbnState | read-only | mandatory | State of neighbor. local(0), congested(1), uncongested(2), keepalive(3) |
| 1.3.6.1.4.1.5.1.1.21.7.1.7 | ColumnaccXnsUbnTtl | read-only | mandatory | Time to live |
| 1.3.6.1.4.1.5.1.1.21.8 | NodeaccXnsUbRip | |||
| 1.3.6.1.4.1.5.1.1.21.8.1 | ScalaraccXnsUbRipRespIns | read-only | mandatory | U-B RIP Responses received |
| 1.3.6.1.4.1.5.1.1.21.8.2 | ScalaraccXnsUbRipHelloIns | read-only | mandatory | U-B RIP Hello packets received |
| 1.3.6.1.4.1.5.1.1.21.8.3 | ScalaraccXnsUbRipConHelIns | read-only | mandatory | U-B RIP (congested) Hello packets received |
| 1.3.6.1.4.1.5.1.1.21.8.4 | ScalaraccXnsUbRipUnConHelIns | read-only | mandatory | U-B RIP (uncongested) Hello packets received |
| 1.3.6.1.4.1.5.1.1.21.8.5 | ScalaraccXnsUbRipRedirIns | read-only | mandatory | U-B RIP redirect packets received |
| 1.3.6.1.4.1.5.1.1.21.8.6 | ScalaraccXnsUbRipRespOuts | read-only | mandatory | U-B RIP responses transmitted |
| 1.3.6.1.4.1.5.1.1.21.8.7 | ScalaraccXnsUbRipHelloOuts | read-only | mandatory | U-B hello packets transmitted |
| 1.3.6.1.4.1.5.1.1.21.8.8 | ScalaraccXnsUbRipConHelOuts | read-only | mandatory | U-B (congested) hello packets transmitted |
| 1.3.6.1.4.1.5.1.1.21.8.9 | ScalaraccXnsUbRipUnConHelOuts | read-only | mandatory | U-B (uncongested) hello packets transmitted |
| 1.3.6.1.4.1.5.1.1.21.8.10 | ScalaraccXnsUbRipRedirOuts | read-only | mandatory | U-B redirect packets transmitted |
| 1.3.6.1.4.1.5.1.1.21.8.11 | ScalaraccXnsUbNoRoutes | read-only | mandatory | U-B unreachable network |
| 1.3.6.1.4.1.5.1.1.21.8.12 | ScalaraccXnsUbInErrs | read-only | mandatory | U-B total input errors |
| 1.3.6.1.4.1.5.1.1.21.8.13 | ScalaraccXnsUbOutErrs | read-only | mandatory | U-B total output errors |
| 1.3.6.1.4.1.5.1.1.21.9 | NodeaccXnsRouteFilters | |||
| 1.3.6.1.4.1.5.1.1.21.9.1 | ScalaraccXnsRteFltrDefaultAction | read-write | mandatory | The action taken on route updates from unconfigured neighbors. |
| 1.3.6.1.4.1.5.1.1.21.9.2 | TableaccXnsRteNbrTable | not-accessible | mandatory | A list of Host Identifiers for Routing Neighbors. |
| 1.3.6.1.4.1.5.1.1.21.9.2.1 | RowaccXnsRteNbrEntry | not-accessible | mandatory | The host identifier for an individual routing neighbor. |
| 1.3.6.1.4.1.5.1.1.21.9.2.1.1 | ColumnaccXnsRteNbrId | read-write | mandatory | The Host Identifier of a potential routing neighbor. |
| 1.3.6.1.4.1.5.1.1.21.9.2.1.2 | ColumnaccXnsRteNbrAction | read-write | mandatory | The action to be taken on advertisements from this routing neighbor, unless overridden by a route filter. |
| 1.3.6.1.4.1.5.1.1.21.9.2.1.3 | ColumnaccXnsRteNbrStatus | read-write | mandatory | Writing 'invalid' has the effect of deleting this routing neighbor and making its associated route filters of no effect. |
| 1.3.6.1.4.1.5.1.1.21.9.3 | TableaccXnsRteFltrTable | not-accessible | mandatory | A list of special advertisements that a given neighbor might offer. Route Advertisements defaults are overridden using this table |
| 1.3.6.1.4.1.5.1.1.21.9.3.1 | RowaccXnsRteFltrEntry | not-accessible | mandatory | A single potential advertisement, with information as to its disposition. |
| 1.3.6.1.4.1.5.1.1.21.9.3.1.1 | ColumnaccXnsRteFltrNeighbor | read-write | mandatory | The Host Identifier of the Routing Neighbor that might offer this advertsiement. |
| 1.3.6.1.4.1.5.1.1.21.9.3.1.2 | ColumnaccXnsRteFltrNetwork | read-write | mandatory | The Network Number the neighbor might advertise. |
| 1.3.6.1.4.1.5.1.1.21.9.3.1.3 | ColumnaccXnsRteFltrAction | read-write | mandatory | What is to be done with such an advertisement. |
| 1.3.6.1.4.1.5.1.1.21.9.3.1.4 | ColumnaccXnsRteFltrStatus | read-write | mandatory | Writing 'invalid' has the effect of deleting this filter. |
| 1.3.6.1.4.1.5.1.1.21.10 | NodeaccXnsNetworkFilters | |||
| 1.3.6.1.4.1.5.1.1.21.10.1 | ScalaraccXnsNetFltrDefaultAction | read-write | mandatory | The action taken on messages not matched. discard(0), lowPriority(1), normalPriority(2), highPriority(3) |
| 1.3.6.1.4.1.5.1.1.21.10.2 | TableoldXnsNetFltrTable | not-accessible | deprecated | A list of network pairs to specially act on. |
| 1.3.6.1.4.1.5.1.1.21.10.2.1 | RowoldXnsNetFltrEntry | not-accessible | deprecated | A single Network Number pair to be matched. |
| 1.3.6.1.4.1.5.1.1.21.10.2.1.1 | ColumnoldXnsNetFltrDestination | read-write | deprecated | The value to be found in the Destination Network Field, or 0x00000000. |
| 1.3.6.1.4.1.5.1.1.21.10.2.1.2 | ColumnoldXnsNetFltrSource | read-write | deprecated | The value to be found in the Source Network Field, or 0x00000000. |
| 1.3.6.1.4.1.5.1.1.21.10.2.1.3 | ColumnoldXnsNetFltrAction | read-write | deprecated | The action to be taken on matching messages. discard(0), lowPriority(1), normalPriority(2), highPriority(3) |
| 1.3.6.1.4.1.5.1.1.21.10.2.1.4 | ColumnoldXnsNetFltrStatus | read-write | deprecated | Writing 'invalid' has the effect of removing this filter entry. |
| 1.3.6.1.4.1.5.1.1.21.10.3 | TableaccXnsNetFltrTable | not-accessible | mandatory | A list of network filters to specially act on. |
| 1.3.6.1.4.1.5.1.1.21.10.3.1 | RowaccXnsNetFltrEntry | not-accessible | mandatory | A single Network filter to be matched. |
| 1.3.6.1.4.1.5.1.1.21.10.3.1.1 | ColumnaccXnsNetFltrDestination | read-write | mandatory | The value to be found in the Destination Network Field, or 0x00000000. |
| 1.3.6.1.4.1.5.1.1.21.10.3.1.2 | ColumnaccXnsNetFltrSource | read-write | mandatory | The value to be found in the Source Network Field, or 0x00000000. |
| 1.3.6.1.4.1.5.1.1.21.10.3.1.3 | ColumnaccXnsNetFltrAction | read-write | mandatory | The action to be taken on matching messages. discard(0), lowPriority(1), normalPriority(2), highPriority(3) |
| 1.3.6.1.4.1.5.1.1.21.10.3.1.4 | ColumnaccXnsNetFltrStatus | read-write | mandatory | Writing 'invalid' has the effect of removing this filter entry. |
| 1.3.6.1.4.1.5.1.1.21.10.3.1.5 | ColumnaccXnsNetFltrDestSkt | read-write | mandatory | The value to be found in the Destination Socket Field, or 0x0000. |
| 1.3.6.1.4.1.5.1.1.21.10.3.1.6 | ColumnaccXnsNetFltrSrcSkt | read-write | mandatory | The value to be found in the Source Socket Field, or 0x0000. |
| 1.3.6.1.4.1.5.1.1.21.10.3.1.7 | ColumnaccXnsNetFltrPktType | read-write | mandatory | Packet type, or zero |
| 1.3.6.1.4.1.5.1.1.21.11 | NodeaccXnsHostFilters | |||
| 1.3.6.1.4.1.5.1.1.21.11.1 | ScalaraccXnsHostFltrDefaultAction | read-write | mandatory | The action taken on hosts not listed. discard(0), lowPriority(1), normalPriority(2), highPriority(3) |
| 1.3.6.1.4.1.5.1.1.21.11.2 | TableaccXnsHostFltrTable | not-accessible | mandatory | A list of XNS Hosts to be handled specially. |
| 1.3.6.1.4.1.5.1.1.21.11.2.1 | RowaccXnsHostFltrEntry | not-accessible | mandatory | A single Host Identifier. |
| 1.3.6.1.4.1.5.1.1.21.11.2.1.1 | ColumnaccXnsHostFltrId | read-write | mandatory | Host Identifier |
| 1.3.6.1.4.1.5.1.1.21.11.2.1.2 | ColumnaccXnsHostFltrSocket | read-write | mandatory | The affected socket number, or zero for 'any socket'. |
| 1.3.6.1.4.1.5.1.1.21.11.2.1.3 | ColumnaccXnsHostFltrPepClient | read-write | mandatory | On PEP traffic, the affected Client Type, or zero for all IDP traffic. |
| 1.3.6.1.4.1.5.1.1.21.11.2.1.4 | ColumnaccXnsHostFltrAction | read-write | mandatory | The action to be taken on matching messages. discard(0), lowPriority(1), normalPriority(2), highPriority(3) |
| 1.3.6.1.4.1.5.1.1.21.11.2.1.5 | ColumnaccXnsHostFltrStatus | read-write | mandatory | Writing 'invalid' has the effect of deleting the entry. |
| 1.3.6.1.4.1.5.1.1.22 | NodeaccIpx | |||
| 1.3.6.1.4.1.5.1.1.22.1 | NodeaccIpxParms | |||
| 1.3.6.1.4.1.5.1.1.22.1.1 | ScalaraccIpxAdStat | read-write | mandatory | Administrative status of IPX routing protocol |
| 1.3.6.1.4.1.5.1.1.22.1.2 | ScalaraccIpxCkSum | read-write | mandatory | Checksumming of IPX protocol |
| 1.3.6.1.4.1.5.1.1.22.1.3 | ScalaraccIpxSpltHorz | read-write | mandatory | Split horizon mode of IPX protocol |
| 1.3.6.1.4.1.5.1.1.22.1.4 | ScalaraccIpxAllNets | read-write | mandatory | All nets mode |
| 1.3.6.1.4.1.5.1.1.22.1.5 | ScalaraccIpxMode | read-write | mandatory | RIP protocol type to use |
| 1.3.6.1.4.1.5.1.1.22.1.6 | ScalaraccIpxWdFilter | read-write | mandatory | Switch to enable/disable a dial originate filter of the IPX file server watchdog (Keep Alive) packet. |
| 1.3.6.1.4.1.5.1.1.22.2 | TableaccIpxNetTable | not-accessible | mandatory | List of IPX Networks. Entries are added/deleted via management action. |
| 1.3.6.1.4.1.5.1.1.22.2.1 | RowaccIpxNetEntry | not-accessible | mandatory | Information on specific network entry. |
| 1.3.6.1.4.1.5.1.1.22.2.1.1 | ColumnaccIpxNetPort | read-write | mandatory | IPX logical port number |
| 1.3.6.1.4.1.5.1.1.22.2.1.2 | ColumnaccIpxNetNumber | read-write | mandatory | IPX network number |
| 1.3.6.1.4.1.5.1.1.22.2.1.3 | ColumnaccIpxNetType | read-write | mandatory | Type of network |
| 1.3.6.1.4.1.5.1.1.22.2.1.4 | ColumnaccIpxNetEncap | read-write | mandatory | LAN Encapsulation used for Ethernets. none(0), v2(1), raw(2), llc(3), snap(4) |
| 1.3.6.1.4.1.5.1.1.22.2.1.5 | ColumnaccIpxNetSlot | read-write | mandatory | Slot to which the network is attached |
| 1.3.6.1.4.1.5.1.1.22.2.1.6 | ColumnaccIpxNetAdStat | read-write | mandatory | Administrative status of network Object will be defaulted if missing in set PDU which adds entries. |
| 1.3.6.1.4.1.5.1.1.22.2.1.7 | ColumnaccIpxNetMtu | read-write | mandatory | Maximum packet size Object will be defaulted if missing in set PDU which adds entries. |
| 1.3.6.1.4.1.5.1.1.22.2.1.8 | ColumnaccIpxNetUpdate | read-write | mandatory | Update interval |
| 1.3.6.1.4.1.5.1.1.22.2.1.9 | ColumnaccIpxNetHops | read-write | mandatory | Hop count |
| 1.3.6.1.4.1.5.1.1.22.2.1.10 | ColumnaccIpxNetCost | read-write | mandatory | Cost metric |
| 1.3.6.1.4.1.5.1.1.22.2.1.11 | ColumnaccIpxNetX25InOutAddr | read-write | mandatory | X25 address to send to and to receive packets from. Object required in set PDU adding X25-type circuit |
| 1.3.6.1.4.1.5.1.1.22.2.1.12 | ColumnaccIpxNetX25InAddr | read-write | mandatory | Receive-only X25 address Object not required in set PDU (defaults to In/Out address) |
| 1.3.6.1.4.1.5.1.1.22.2.1.13 | ColumnaccIpxNetX25Idle | read-write | mandatory | Time X25 connection can be idle before it is determined to be not busy. |
| 1.3.6.1.4.1.5.1.1.22.2.1.14 | ColumnaccIpxNetX25PktVal | read-write | mandatory | X25 packet size |
| 1.3.6.1.4.1.5.1.1.22.2.1.15 | ColumnaccIpxNetX25PktWin | read-write | mandatory | X25 packet window |
| 1.3.6.1.4.1.5.1.1.22.2.1.16 | ColumnaccIpxNetEntryStat | read-write | mandatory | Status of this table entry Set this object to invalid to delete entry. |
| 1.3.6.1.4.1.5.1.1.22.2.1.17 | ColumnaccIpxNetFncAddr | read-write | mandatory | The MAC-layer functional address for sending and receiving multicasts. |
| 1.3.6.1.4.1.5.1.1.22.2.1.18 | ColumnaccIpxNetSrMode | read-write | mandatory | The source-routing mode for token-ring networks. |
| 1.3.6.1.4.1.5.1.1.22.2.1.19 | ColumnaccIpxNetX25FacIndex | read-write | mandatory | Index of optional facility string or 0. |
| 1.3.6.1.4.1.5.1.1.22.2.1.20 | ColumnaccIpxNetDlci | read-write | mandatory | Frame Relay DLCI for this port |
| 1.3.6.1.4.1.5.1.1.22.2.1.21 | ColumnaccIpxNetWdState | read-write | mandatory | Determines the IPX watchdog state on a specific logical port. The default is ALLOW for LAN/DEDICATED WAN type, PROXY for X.21/FFR/Dial type. |
| 1.3.6.1.4.1.5.1.1.22.3 | TableaccIpxRtTable | not-accessible | mandatory | List of routes to other IPX networks |
| 1.3.6.1.4.1.5.1.1.22.3.1 | RowaccIpxRtEntry | not-accessible | mandatory | Information on route to destination network |
| 1.3.6.1.4.1.5.1.1.22.3.1.1 | ColumnaccIpxRtDest | read-only | mandatory | Destination network. |
| 1.3.6.1.4.1.5.1.1.22.3.1.2 | ColumnaccIpxRtNxtNet | read-only | mandatory | The next network along the way to the destination network. |
| 1.3.6.1.4.1.5.1.1.22.3.1.3 | ColumnaccIpxRtRouter | read-only | mandatory | Router on next IPX network on route |
| 1.3.6.1.4.1.5.1.1.22.3.1.4 | ColumnaccIpxRtHops | read-only | mandatory | Number of hops to remote network |
| 1.3.6.1.4.1.5.1.1.22.3.1.5 | ColumnaccIpxRtCost | read-only | mandatory | Cost to remote network |
| 1.3.6.1.4.1.5.1.1.22.3.1.6 | ColumnaccIpxRtType | read-only | mandatory | Type of route |
| 1.3.6.1.4.1.5.1.1.22.3.1.7 | ColumnaccIpxRtOwner | read-only | mandatory | Source of route |
| 1.3.6.1.4.1.5.1.1.22.3.1.8 | ColumnaccIpxRtAge | read-only | mandatory | Age of route |
| 1.3.6.1.4.1.5.1.1.22.3.1.9 | ColumnaccIpxRtPort | read-only | mandatory | The logical port number through which packets will be forwarded to the destination network. |
| 1.3.6.1.4.1.5.1.1.22.4 | NodeaccIpxRipStat | |||
| 1.3.6.1.4.1.5.1.1.22.4.1 | ScalaraccIpxRipReqIns | read-only | mandatory | IPX RIP requests received |
| 1.3.6.1.4.1.5.1.1.22.4.2 | ScalaraccIpxRipRespIns | read-only | mandatory | IPX RIP responses received |
| 1.3.6.1.4.1.5.1.1.22.4.3 | ScalaraccIpxRipReqOuts | read-only | mandatory | IPX RIP requests transmitted |
| 1.3.6.1.4.1.5.1.1.22.4.4 | ScalaraccIpxRipRespOuts | read-only | mandatory | IPX RIP responses transmitted |
| 1.3.6.1.4.1.5.1.1.22.4.5 | ScalaraccIpxRipErrIns | read-only | mandatory | IPX RIP responses recevied with errors. |
| 1.3.6.1.4.1.5.1.1.22.4.6 | ScalaraccIpxRipErrOuts | read-only | mandatory | IPX RIP responses transmitted with errors. |
| 1.3.6.1.4.1.5.1.1.22.5 | NodeaccIpxNodeStat | |||
| 1.3.6.1.4.1.5.1.1.22.5.1 | ScalaraccIpxLocalIns | read-only | mandatory | Packets received for local usage |
| 1.3.6.1.4.1.5.1.1.22.5.2 | ScalaraccIpxLocalOuts | read-only | mandatory | Locally generated packets |
| 1.3.6.1.4.1.5.1.1.22.5.3 | ScalaraccIpxNoSockets | read-only | mandatory | Packets received for which there was no socket |
| 1.3.6.1.4.1.5.1.1.22.5.4 | ScalaraccIpxNoRoutes | read-only | mandatory | Packets for which no route was found |
| 1.3.6.1.4.1.5.1.1.22.5.5 | ScalaraccIpxNodeInErrs | read-only | mandatory | The number of input packets discarded by this node because of some unspecified internal error. |
| 1.3.6.1.4.1.5.1.1.22.5.6 | ScalaraccIpxOutErrs | read-only | mandatory | Output errors |
| 1.3.6.1.4.1.5.1.1.22.5.7 | ScalaraccIpxAllNetsIns | read-only | mandatory | All-nets packets received |
| 1.3.6.1.4.1.5.1.1.22.5.8 | ScalaraccIpxAllNetsOuts | read-only | mandatory | All-nets packets transmitted |
| 1.3.6.1.4.1.5.1.1.22.5.9 | ScalaraccIpxAllNetsErrs | read-only | mandatory | Erroneous All-Nets packets encountered |
| 1.3.6.1.4.1.5.1.1.22.6 | TableaccIpxPortStatTable | not-accessible | mandatory | IPX Port statistics table |
| 1.3.6.1.4.1.5.1.1.22.6.1 | RowaccIpxPortStatEntry | not-accessible | mandatory | Per-port statistics |
| 1.3.6.1.4.1.5.1.1.22.6.1.1 | ColumnaccIpxPortNumber | read-only | mandatory | Port number |
| 1.3.6.1.4.1.5.1.1.22.6.1.2 | ColumnaccIpxPortTotalIns | read-only | mandatory | Total number of IPX Packets received |
| 1.3.6.1.4.1.5.1.1.22.6.1.3 | ColumnaccIpxPorFwdReqIns | read-only | mandatory | The number of input packets not addressed to the receiving port, as a result of which an attempt was made to find a route to forward them to the final destinat… |
| 1.3.6.1.4.1.5.1.1.22.6.1.4 | ColumnaccIpxPortNoFwdRts | read-only | mandatory | The number of packets received on this port for which no route to the destination network could be found. |
| 1.3.6.1.4.1.5.1.1.22.6.1.5 | ColumnaccIpxPortTotalOuts | read-only | mandatory | Total IPX packets transmitted |
| 1.3.6.1.4.1.5.1.1.22.6.1.6 | ColumnaccIpxPortHopCnts | read-only | mandatory | The number of packets received on this port whose hop count had reached the maximum value. |
| 1.3.6.1.4.1.5.1.1.22.6.1.7 | ColumnaccIpxPortNotForMes | read-only | mandatory | The number of packets received on this port which were addressed to another node on the same network. |
| 1.3.6.1.4.1.5.1.1.22.6.1.8 | ColumnaccIpxPortFwdReqOuts | read-only | mandatory | The number of packets received on this port which were successfully forwarded to another port. |
| 1.3.6.1.4.1.5.1.1.22.6.1.9 | ColumnaccIpxPortFwdErrs | read-only | mandatory | The number of packets received on this port which could not be forwarded, either because there were transmitted via a MAC-layer broadcast, or because their sou… |
| 1.3.6.1.4.1.5.1.1.22.6.1.10 | ColumnaccIpxPortInErrs | read-only | mandatory | The number of packets received on this port which were discarded because of some unspecified internal error. |
| 1.3.6.1.4.1.5.1.1.22.6.1.11 | ColumnaccIpxPortTooShorts | read-only | mandatory | The number of packets received on this port which were discarded because they were too short. |
| 1.3.6.1.4.1.5.1.1.22.6.1.12 | ColumnaccIpxPortCkSums | read-only | mandatory | IPX packet checksum errors detected |
| 1.3.6.1.4.1.5.1.1.22.6.1.13 | ColumnaccIpxPortTooLongs | read-only | mandatory | The number of packets received on this port which were discarded because they were too long. |
| 1.3.6.1.4.1.5.1.1.22.6.1.14 | ColumnaccIpxPortOutErrs | read-only | mandatory | IPX packet output errors detected |
| 1.3.6.1.4.1.5.1.1.22.6.1.15 | ColumnaccIpxPortOpState | read-only | mandatory | Operational status of this port. off(0), down(1), start(2), stop(3), up(4) |
| 1.3.6.1.4.1.5.1.1.22.7 | NodeaccIpxSapStat | |||
| 1.3.6.1.4.1.5.1.1.22.7.1 | ScalaraccIpxSapReqIns | read-only | mandatory | IPX SAP requests received |
| 1.3.6.1.4.1.5.1.1.22.7.2 | ScalaraccIpxSapReqOuts | read-only | mandatory | IPX SAP requests transmitted |
| 1.3.6.1.4.1.5.1.1.22.7.3 | ScalaraccIpxSapRespIns | read-only | mandatory | IPX SAP responses received |
| 1.3.6.1.4.1.5.1.1.22.7.4 | ScalaraccIpxSapRespOuts | read-only | mandatory | IPX SAP responses transmitted |
| 1.3.6.1.4.1.5.1.1.22.7.5 | ScalaraccIpxSapGetNearIns | read-only | mandatory | Get nearest requests received |
| 1.3.6.1.4.1.5.1.1.22.7.6 | ScalaraccIpxSapGetNearOuts | read-only | mandatory | Get nearest requests transmitted |
| 1.3.6.1.4.1.5.1.1.22.7.7 | ScalaraccIpxSapNoRoutes | read-only | mandatory | IPX SAP packets for unreachable net |
| 1.3.6.1.4.1.5.1.1.22.7.8 | ScalaraccIpxSapNotBests | read-only | mandatory | IPX SAP packet which we know there is a better route for |
| 1.3.6.1.4.1.5.1.1.22.7.9 | ScalaraccIpxSapNoServers | read-only | mandatory | No server available |
| 1.3.6.1.4.1.5.1.1.22.7.10 | ScalaraccIpxSapInErrs | read-only | mandatory | Bad IPX SAP packets received |
| 1.3.6.1.4.1.5.1.1.22.7.11 | ScalaraccIpxSapOutErrs | read-only | mandatory | Bad IPX SAP packets transmitted |
| 1.3.6.1.4.1.5.1.1.22.8 | TableaccIpxSrvTable | not-accessible | mandatory | IPX server table |
| 1.3.6.1.4.1.5.1.1.22.8.1 | RowaccIpxSrvEntry | not-accessible | mandatory | Specific IPX server information |
| 1.3.6.1.4.1.5.1.1.22.8.1.1 | ColumnaccIpxSrvName | read-only | mandatory | Name of server |
| 1.3.6.1.4.1.5.1.1.22.8.1.2 | ColumnaccIpxSrvType | read-only | mandatory | Type of server |
| 1.3.6.1.4.1.5.1.1.22.8.1.3 | ColumnaccIpxSrvHost | read-only | mandatory | Host |
| 1.3.6.1.4.1.5.1.1.22.8.1.4 | ColumnaccIpxSrvHops | read-only | mandatory | Hop counter |
| 1.3.6.1.4.1.5.1.1.22.8.1.5 | ColumnaccIpxSrvOwner | read-only | mandatory | Source of route |
| 1.3.6.1.4.1.5.1.1.22.8.1.6 | ColumnaccIpxSrvAge | read-only | mandatory | Age of route |
| 1.3.6.1.4.1.5.1.1.22.9 | NodeaccIpxRouteFilters | |||
| 1.3.6.1.4.1.5.1.1.22.9.1 | ScalaraccIpxRteFltrDefaultAction | read-write | mandatory | The action taken on route updates from unconfigured neighbors. |
| 1.3.6.1.4.1.5.1.1.22.9.2 | TableaccIpxRteNbrTable | not-accessible | mandatory | A list of Host Identifiers for Routing Neighbors. |
| 1.3.6.1.4.1.5.1.1.22.9.2.1 | RowaccIpxRteNbrEntry | not-accessible | mandatory | The host identifier for an individual routing neighbor. |
| 1.3.6.1.4.1.5.1.1.22.9.2.1.1 | ColumnaccIpxRteNbrId | read-write | mandatory | The Host Identifier of a potential routing neighbor. |
| 1.3.6.1.4.1.5.1.1.22.9.2.1.2 | ColumnaccIpxRteNbrAction | read-write | mandatory | The action to be taken on advertisements from this routing neighbor, unless overridden by a route filter. |
| 1.3.6.1.4.1.5.1.1.22.9.2.1.3 | ColumnaccIpxRteNbrStatus | read-write | mandatory | Writing 'invalid' has the effect of deleting this routing neighbor and making its associated route filters of no effect. |
| 1.3.6.1.4.1.5.1.1.22.9.3 | TableaccIpxRteFltrTable | not-accessible | mandatory | A list of special advertisements that a given neighbor might offer. Route Advertisements defaults are overridden using this table |
| 1.3.6.1.4.1.5.1.1.22.9.3.1 | RowaccIpxRteFltrEntry | not-accessible | mandatory | A single potential advertisement, with information as to its disposition. |
| 1.3.6.1.4.1.5.1.1.22.9.3.1.1 | ColumnaccIpxRteFltrNeighbor | read-write | mandatory | The Host Identifier of the Routing Neighbor that might offer this advertsiement. |
| 1.3.6.1.4.1.5.1.1.22.9.3.1.2 | ColumnaccIpxRteFltrNetwork | read-write | mandatory | The Network Number the neighbor might advertise. |
| 1.3.6.1.4.1.5.1.1.22.9.3.1.3 | ColumnaccIpxRteFltrAction | read-write | mandatory | What is to be done with such an advertisement. |
| 1.3.6.1.4.1.5.1.1.22.9.3.1.4 | ColumnaccIpxRteFltrStatus | read-write | mandatory | Writing 'invalid' has the effect of deleting this filter. |
| 1.3.6.1.4.1.5.1.1.22.10 | NodeaccIpxNetworkFilters | |||
| 1.3.6.1.4.1.5.1.1.22.10.1 | ScalaraccIpxNetFltrDefaultAction | read-write | mandatory | The action taken on messages not matched. discard(0), lowPriority(1), normalPriority(2), highPriority(3) |
| 1.3.6.1.4.1.5.1.1.22.10.2 | TableoldIpxNetFltrTable | not-accessible | deprecated | A list of network pairs to specially act on. |
| 1.3.6.1.4.1.5.1.1.22.10.2.1 | RowoldIpxNetFltrEntry | not-accessible | deprecated | A single Network Number pair to be matched. |
| 1.3.6.1.4.1.5.1.1.22.10.2.1.1 | ColumnoldIpxNetFltrDestination | read-write | deprecated | The value to be found in the Destination Network Field, or 0x00000000. |
| 1.3.6.1.4.1.5.1.1.22.10.2.1.2 | ColumnoldIpxNetFltrSource | read-write | deprecated | The value to be found in the Source Network Field, or 0x00000000. |
| 1.3.6.1.4.1.5.1.1.22.10.2.1.3 | ColumnoldIpxNetFltrAction | read-write | deprecated | The action to be taken on matching messages. discard(0), lowPriority(1), normalPriority(2), highPriority(3) |
| 1.3.6.1.4.1.5.1.1.22.10.2.1.4 | ColumnoldIpxNetFltrStatus | read-write | deprecated | Writing 'invalid' has the effect of removing this filter entry. |
| 1.3.6.1.4.1.5.1.1.22.10.3 | TableaccIpxNetFltrTable | not-accessible | mandatory | A list of network filters to specially act on. |
| 1.3.6.1.4.1.5.1.1.22.10.3.1 | RowaccIpxNetFltrEntry | not-accessible | mandatory | A single Network filter to be matched. |
| 1.3.6.1.4.1.5.1.1.22.10.3.1.1 | ColumnaccIpxNetFltrDestination | read-write | mandatory | The value to be found in the Destination Network Field, or 0x00000000. |
| 1.3.6.1.4.1.5.1.1.22.10.3.1.2 | ColumnaccIpxNetFltrSource | read-write | mandatory | The value to be found in the Source Network Field, or 0x00000000. |
| 1.3.6.1.4.1.5.1.1.22.10.3.1.3 | ColumnaccIpxNetFltrAction | read-write | mandatory | The action to be taken on matching messages. discard(0), lowPriority(1), normalPriority(2), highPriority(3) |
| 1.3.6.1.4.1.5.1.1.22.10.3.1.4 | ColumnaccIpxNetFltrStatus | read-write | mandatory | Writing 'invalid' has the effect of removing this filter entry. |
| 1.3.6.1.4.1.5.1.1.22.10.3.1.5 | ColumnaccIpxNetFltrDestSkt | read-write | mandatory | The value to be found in the Destination Socket field, or 0x0000. |
| 1.3.6.1.4.1.5.1.1.22.10.3.1.6 | ColumnaccIpxNetFltrSrcSkt | read-write | mandatory | The value to be found in the Source Socket Field, or 0x0000. |
| 1.3.6.1.4.1.5.1.1.22.10.3.1.7 | ColumnaccIpxNetFltrPktType | read-write | mandatory | Packet type or zero |
| 1.3.6.1.4.1.5.1.1.22.11 | NodeaccIpxHostFilters | |||
| 1.3.6.1.4.1.5.1.1.22.11.1 | ScalaraccIpxHostFltrDefaultAction | read-write | mandatory | The action taken on hosts not listed. discard(0), lowPriority(1), normalPriority(2), highPriority(3) |
| 1.3.6.1.4.1.5.1.1.22.11.2 | TableaccIpxHostFltrTable | not-accessible | mandatory | A list of IPX Hosts to be handled specially. |
| 1.3.6.1.4.1.5.1.1.22.11.2.1 | RowaccIpxHostFltrEntry | not-accessible | mandatory | A single Host Identifier. |
| 1.3.6.1.4.1.5.1.1.22.11.2.1.1 | ColumnaccIpxHostFltrId | read-write | mandatory | Host Identifier |
| 1.3.6.1.4.1.5.1.1.22.11.2.1.2 | ColumnaccIpxHostFltrSocket | read-write | mandatory | The affected socket number, or zero for 'any socket'. |
| 1.3.6.1.4.1.5.1.1.22.11.2.1.3 | ColumnaccIpxHostFltrPepClient | read-write | mandatory | On PEP traffic, the affected Client Type, or zero for all IDP traffic. |
| 1.3.6.1.4.1.5.1.1.22.11.2.1.4 | ColumnaccIpxHostFltrAction | read-write | mandatory | The action to be taken on matching messages. discard(0), lowPriority(1), normalPriority(2), highPriority(3) |
| 1.3.6.1.4.1.5.1.1.22.11.2.1.5 | ColumnaccIpxHostFltrStatus | read-write | mandatory | Writing 'invalid' has the effect of deleting the entry. |
| 1.3.6.1.4.1.5.1.1.22.12 | NodeaccIpxSapFilters | |||
| 1.3.6.1.4.1.5.1.1.22.12.1 | ScalaraccIpxSapFltrDefault | read-write | mandatory | The default behavior taken on locally originated (hop count <= 2) Service Advertisements. Remote advertisements must be identified individually. |
| 1.3.6.1.4.1.5.1.1.22.12.2 | TableaccIpxSapFltrTable | not-accessible | mandatory | A list of Service Names to be handled Specially. |
| 1.3.6.1.4.1.5.1.1.22.12.2.1 | RowaccIpxSapFltrEntry | not-accessible | mandatory | A single Service name and its intended disposition. |
| 1.3.6.1.4.1.5.1.1.22.12.2.1.1 | ColumnaccIpxSapFltrSrvType | read-write | mandatory | The Service Type of the affected SAP Entry. Zero indicates all services. |
| 1.3.6.1.4.1.5.1.1.22.12.2.1.2 | ColumnaccIpxSapFltrSrvName | read-write | mandatory | The name of the affected service. An Octet String of length zero indicates all services. Name may be up to 48 octets |
| 1.3.6.1.4.1.5.1.1.22.12.2.1.3 | ColumnaccIpxSapFltrAction | read-write | mandatory | The action to be taken upon a match. |
| 1.3.6.1.4.1.5.1.1.22.12.2.1.4 | ColumnaccIpxSapFltrStatus | read-write | mandatory | Writing 'invalid' has the effect of removing the entry. |
| 1.3.6.1.4.1.5.1.1.22.13 | NodeaccIpxNetWdParms | |||
| 1.3.6.1.4.1.5.1.1.22.13.1 | ScalaraccIpxWdProxyDuration | read-write | mandatory | IPX Watchdog proxy duration Value is 0 to proxy for forever & the proxy duration can be set to 0 - 86400 |
| 1.3.6.1.4.1.5.1.1.22.13.2 | ScalaraccIpxWdHoldPeriod | read-write | mandatory | ACC IPX Watchdog hold period Default value is 960 minutes, Hold period range is 960 - 60600 |
| 1.3.6.1.4.1.5.1.1.22.13.3 | ScalaraccIpxWdMaxSessions | read-write | mandatory | ACC IPX Watchdog Max Sessions Default value is 1024, Valid range is 1- 4096 |
| 1.3.6.1.4.1.5.1.1.22.13.4 | ScalaraccIpxWdDiagLevel | read-write | mandatory | ACC IPX Watchdog Diagnostics Level Default value is 1, Valid range is 1- 7 |
| 1.3.6.1.4.1.5.1.1.23 | TableipMultiPathTable | not-accessible | mandatory | This entity's IP Routing table. |
| 1.3.6.1.4.1.5.1.1.23.1 | RowipMultiPathEntry | not-accessible | mandatory | A particular route to a particular destina- tion, under a particular policy. |
| 1.3.6.1.4.1.5.1.1.23.1.1 | ColumnipMultiPathDest | read-write | mandatory | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. |
| 1.3.6.1.4.1.5.1.1.23.1.2 | ColumnipMultiPathPolicy | read-write | mandatory | An instantiator for the relevant policy table. |
| 1.3.6.1.4.1.5.1.1.23.1.3 | ColumnipMultiPathIfIndex | read-write | mandatory | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.5.1.1.23.1.4 | ColumnipMultiPathMask | read-write | mandatory | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipMultiPathDest field. For those systems that do n… |
| 1.3.6.1.4.1.5.1.1.23.1.5 | ColumnipMultiPathNextHop | read-write | mandatory | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.5.1.1.23.1.6 | ColumnipMultiPathMetric | read-write | mandatory | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipMultiPathProto value. |
| 1.3.6.1.4.1.5.1.1.23.1.7 | ColumnipMultiPathType | read-write | mandatory | The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP archi- tecture. Setting this obj… |
| 1.3.6.1.4.1.5.1.1.23.1.8 | ColumnipMultiPathProto | read-write | mandatory | The routing mechanism via which this route was learned. |
| 1.3.6.1.4.1.5.1.1.23.1.9 | ColumnipMultiPathAge | read-write | mandatory | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.5.1.1.24 | NodeaccTr | |||
| 1.3.6.1.4.1.5.1.1.24.1 | ScalaraccTrNumber | read-only | mandatory | Number of token-ring interfaces |
| 1.3.6.1.4.1.5.1.1.24.2 | TableaccTrTable | not-accessible | mandatory | Token Ring table |
| 1.3.6.1.4.1.5.1.1.24.2.1 | RowaccTrEntry | not-accessible | mandatory | Additional information about Token Ring interfaces. |
| 1.3.6.1.4.1.5.1.1.24.2.1.2 | ColumnaccTrEarlyRelease | read-write | mandatory | If on, the device will pass the token immediately after transmitting a frame, rather than awaiting the message to transit the ring. |
| 1.3.6.1.4.1.5.1.1.24.2.1.3 | ColumnaccTrMACAddr | read-write | mandatory | Locally-administered MAC address of this interface. If zero, an algorithmically determined address is used. |
| 1.3.6.1.4.1.5.1.1.24.2.1.4 | ColumnaccTrDefaultRingId | read-write | mandatory | Ring ID that interface will use if one is not provided by a ring server. |
| 1.3.6.1.4.1.5.1.1.24.2.1.5 | ColumnaccTrActiveRingId | read-only | mandatory | ID of ring that this interface participates on |
| 1.3.6.1.4.1.5.1.1.24.2.1.6 | ColumnaccTrRingSrvStatus | read-only | mandatory | Indicates if a ring server was found. |
| 1.3.6.1.4.1.5.1.1.25 | NodeaccSr | |||
| 1.3.6.1.4.1.5.1.1.25.1 | NodeaccSrBridge | |||
| 1.3.6.1.4.1.5.1.1.25.1.1 | ScalaraccSrBridgeId | read-write | mandatory | ID of this bridge |
| 1.3.6.1.4.1.5.1.1.25.1.2 | ScalaraccSrVirRingId | read-write | mandatory | Ring number used by bridges on a WAN |
| 1.3.6.1.4.1.5.1.1.25.1.3 | ScalaraccSrHopLimit | read-write | mandatory | This bridge will discard a broadcast packet which has transited this many bridges en route. |
| 1.3.6.1.4.1.5.1.1.25.1.4 | ScalaraccSrSingleRtBcast | read-write | mandatory | If off, this bridge will not forward single-route broadcast packets. |
| 1.3.6.1.4.1.5.1.1.25.1.5 | ScalaraccSrNumPorts | read-write | mandatory | Number of physical ports of unit. |
| 1.3.6.1.4.1.5.1.1.25.1.6 | ScalaraccSrRifTimer | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.1.7 | ScalaraccSrSdsInterval | read-write | mandatory | Interval between transmissions of SDS protocol packets |
| 1.3.6.1.4.1.5.1.1.25.2 | TableaccSrPortParmTable | not-accessible | mandatory | This table contains per-port parameters for source-routed bridge ports. |
| 1.3.6.1.4.1.5.1.1.25.2.1 | RowaccSrPortParmEntry | not-accessible | mandatory | Parameters for this bridge port |
| 1.3.6.1.4.1.5.1.1.25.2.1.1 | ColumnaccSrParmsIndex | read-only | mandatory | Bridge port number |
| 1.3.6.1.4.1.5.1.1.25.2.1.2 | ColumnaccSrAdminStatus | read-write | mandatory | Administrative status of this bridge port. If down, source-routing bridging will not occur. |
| 1.3.6.1.4.1.5.1.1.25.2.1.3 | ColumnaccSrOperStatus | read-only | mandatory | Operational (is) status of this bridge port. |
| 1.3.6.1.4.1.5.1.1.25.2.1.4 | ColumnaccSrPortProtocol | read-write | mandatory | Protocol |
| 1.3.6.1.4.1.5.1.1.25.2.1.5 | ColumnaccSrPortLine | read-write | mandatory | Index of physical port associated with this Source-Routing port. |
| 1.3.6.1.4.1.5.1.1.25.2.1.6 | ColumnaccSrPortFrDlci | read-write | mandatory | Frame Relay DLCI for this port |
| 1.3.6.1.4.1.5.1.1.25.2.1.7 | ColumnaccSrPortXBridgeStatus | read-write | mandatory | Translation bridge status for this port. |
| 1.3.6.1.4.1.5.1.1.25.2.1.8 | ColumnaccSrPortVirRingId | read-write | mandatory | Port Virtual Ring Id |
| 1.3.6.1.4.1.5.1.1.25.2.1.9 | ColumnaccSrPortSrMethod | read-write | mandatory | Port Source Routing Method |
| 1.3.6.1.4.1.5.1.1.25.3 | TableaccSrPortStatsTable | not-accessible | mandatory | Statistical information on bridge ports. |
| 1.3.6.1.4.1.5.1.1.25.3.1 | RowaccSrPortStatsEntry | not-accessible | mandatory | Statistics for a single bridge port |
| 1.3.6.1.4.1.5.1.1.25.3.1.1 | ColumnaccStatsIndex | read-only | mandatory | Bridge port number |
| 1.3.6.1.4.1.5.1.1.25.3.1.2 | ColumnaccInBcastPkts | read-only | mandatory | All-stations broadcast packets received |
| 1.3.6.1.4.1.5.1.1.25.3.1.3 | ColumnaccInUcastPkts | read-only | mandatory | Unicast packets received |
| 1.3.6.1.4.1.5.1.1.25.3.1.4 | ColumnaccOutBcastPkts | read-only | mandatory | All-stations broadcast packets transmitted |
| 1.3.6.1.4.1.5.1.1.25.3.1.5 | ColumnaccOutUcastPkts | read-only | mandatory | Non-unicast packets received |
| 1.3.6.1.4.1.5.1.1.25.3.1.6 | ColumnaccInSDSPkts | read-only | mandatory | Serial Discovery Sequence packets received. These packets are a component of a proprietary ACC protocol used when a serial link is established between a pair o… |
| 1.3.6.1.4.1.5.1.1.25.3.1.7 | ColumnaccInAPEPkts | read-only | mandatory | All-path explorer packets received |
| 1.3.6.1.4.1.5.1.1.25.3.1.8 | ColumnaccOutSDSPkts | read-only | mandatory | Serial Discovery Sequence packets transmitted. |
| 1.3.6.1.4.1.5.1.1.25.3.1.9 | ColumnaccOutAPEPkts | read-only | mandatory | All-Path Explorer Packets transmitted |
| 1.3.6.1.4.1.5.1.1.25.3.1.10 | ColumnaccInDiscPkts | read-only | mandatory | Packets discarded due to address filtering. |
| 1.3.6.1.4.1.5.1.1.25.3.1.11 | ColumnaccOutDelayDiscPkts | read-only | mandatory | Packets discarded because they were too long on the output queue. |
| 1.3.6.1.4.1.5.1.1.25.3.1.12 | ColumnaccOutPrioDiscPkts | read-only | mandatory | Packets discarded due to protocol prioritization. |
| 1.3.6.1.4.1.5.1.1.25.3.1.13 | ColumnaccInMcastPkts | read-only | mandatory | Multicast packets received. |
| 1.3.6.1.4.1.5.1.1.25.3.1.14 | ColumnaccOutMcastPkts | read-only | mandatory | Multicast packets transmitted. |
| 1.3.6.1.4.1.5.1.1.25.4 | TableaccSrRouteTable | not-accessible | mandatory | Table of source-routing routes |
| 1.3.6.1.4.1.5.1.1.25.4.1 | RowaccSrRouteEntry | not-accessible | mandatory | Information on a specific route |
| 1.3.6.1.4.1.5.1.1.25.4.1.1 | ColumnaccSrRtDest | read-only | mandatory | Destination for which route is intended |
| 1.3.6.1.4.1.5.1.1.25.4.1.2 | ColumnaccSrRtControl | read-only | mandatory | Control bytes in routing field |
| 1.3.6.1.4.1.5.1.1.25.4.1.3 | ColumnaccSrRtDesc | read-only | mandatory | Route description; sequence of bridge and ring ID's. |
| 1.3.6.1.4.1.5.1.1.25.4.1.4 | ColumnaccSrRtIfIndex | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.5 | TableaccSrFilterTable | not-accessible | deprecated | Table of filters to permit forwarding or dropping of frames on per-station-pair basis Records can be deleted by setting either the source or destination to the… |
| 1.3.6.1.4.1.5.1.1.25.5.1 | RowaccSrFilterEntry | not-accessible | deprecated | A specific filter |
| 1.3.6.1.4.1.5.1.1.25.5.1.1 | ColumnaccSrFilterDest | read-write | deprecated | Destination MAC address of packet to be filtered. Zero address matches all. |
| 1.3.6.1.4.1.5.1.1.25.5.1.2 | ColumnaccSrFilterSrc | read-write | deprecated | Source MAC address of packet to be filtered Zero address matches all. |
| 1.3.6.1.4.1.5.1.1.25.5.1.3 | ColumnaccSrFilterAction | read-write | deprecated | Action to take packets satisfying filter criteria. forward(0), discard(1) |
| 1.3.6.1.4.1.5.1.1.25.6 | TableaccSrFpTable | not-accessible | mandatory | A list of Forwarding Priority Entries. Entries are added/deleted via management action. |
| 1.3.6.1.4.1.5.1.1.25.6.1 | RowaccSrFpEntry | not-accessible | mandatory | Relative Priority between frames to be forwarded on a Bridge Port. |
| 1.3.6.1.4.1.5.1.1.25.6.1.1 | ColumnaccSrFpIndex | read-write | mandatory | Port number |
| 1.3.6.1.4.1.5.1.1.25.6.1.2 | ColumnaccSrFpProt | read-write | mandatory | protocol type Set this object to NULL to delete the entry. |
| 1.3.6.1.4.1.5.1.1.25.6.1.3 | ColumnaccSrFpPrio | read-write | mandatory | Relative forwarding priority assigned to protocol. discard(0), low(1), normal(2), high(3) |
| 1.3.6.1.4.1.5.1.1.25.7 | NodeaccSrFpDefaults | |||
| 1.3.6.1.4.1.5.1.1.25.7.1 | ScalaraccSrFpPriDefault | read-write | mandatory | discard(0), low(1), normal(2), high(3) |
| 1.3.6.1.4.1.5.1.1.25.9 | TableaccSrPortFRTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.9.1 | RowaccSrPortFREntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.9.1.1 | ColumnaccSrPortFRport | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.9.1.2 | ColumnaccSrPortFRdlci | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.9.1.3 | ColumnaccSrPortFRencap | read-write | mandatory | Frame Relay Encapsulation Method |
| 1.3.6.1.4.1.5.1.1.25.10 | TableaccSrPortX25Table | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.10.1 | RowaccSrPortX25Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.10.1.1 | ColumnaccSrPortX25port | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.10.1.2 | ColumnaccSrPortX25addr1 | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.10.1.3 | ColumnaccSrPortX25addr2 | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.10.1.4 | ColumnaccSrPortX25idleTime | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.10.1.5 | ColumnaccSrPortX25pktNegot | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.10.1.6 | ColumnaccSrPortX25windowNegot | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.10.1.7 | ColumnaccSrPortX25FacIndex | read-write | mandatory | Index of optional facility string or zero. |
| 1.3.6.1.4.1.5.1.1.25.11 | NodeaccSrStp | |||
| 1.3.6.1.4.1.5.1.1.25.11.1 | NodeaccSrStpBridge | |||
| 1.3.6.1.4.1.5.1.1.25.11.1.1 | ScalaraccSrStpPriority | read-write | mandatory | Among all devices participating in the sr spanning tree, the one with the highest priority (numerically lowest value of this parameter) is elected as the Root … |
| 1.3.6.1.4.1.5.1.1.25.11.1.2 | ScalaraccSrStpId | read-only | mandatory | Unique bridge identifier of this bridge. This object comprises two parts, one of which is the MAC address, and the other of which is the SrStpPriority and is t… |
| 1.3.6.1.4.1.5.1.1.25.11.1.3 | ScalaraccSrStpBrAddr | read-only | mandatory | MAC address of preferred port for this bridge. |
| 1.3.6.1.4.1.5.1.1.25.11.1.4 | ScalaraccSrStpMode | read-write | mandatory | Style of this Bridge's participation in Spanning Tree. Ieee follows 802.1d recommendations, manual is a static assignment (no bpdus are sent, received bpdus ar… |
| 1.3.6.1.4.1.5.1.1.25.11.1.5 | ScalaraccSrStpFilterTime | read-only | mandatory | Minimum time period elapsing between the transmission of Hello frames through a given Bridge Port. No more than two Hello frames shall be transmitted in any Sr… |
| 1.3.6.1.4.1.5.1.1.25.11.1.6 | ScalaraccSrStpMcastAddr | read-write | mandatory | A unique MAC group address, recognised by all the Bridges within the Bridged Local Area Network. |
| 1.3.6.1.4.1.5.1.1.25.11.1.7 | ScalaraccSrStpTopChangeDet | read-only | mandatory | Indicates if this unit has detected the Topology change indication in the hello BPDU. |
| 1.3.6.1.4.1.5.1.1.25.11.1.8 | ScalaraccSrStpTopChange | read-only | mandatory | Indicates if the STP topology of a network is in process of changing. |
| 1.3.6.1.4.1.5.1.1.25.11.1.9 | ScalaraccSrStpTopChangeTimer | read-only | mandatory | This timer serves to determine the time period for which hello frames are transmitted with the Topology Change flag parameter set by the Bridge when it is the … |
| 1.3.6.1.4.1.5.1.1.25.11.1.10 | ScalaraccSrStpDesRoot | read-only | mandatory | The Bridge Identifier of the device currently assumed by this unit to be the Root. |
| 1.3.6.1.4.1.5.1.1.25.11.1.11 | ScalaraccSrStpRootPathCost | read-only | mandatory | Current path cost to the Root Bridge. |
| 1.3.6.1.4.1.5.1.1.25.11.1.12 | ScalaraccSrStpRootPort | read-only | mandatory | Port Number of the one Port in the direction of the Root. (Value is meaningless if this unit is the Root). |
| 1.3.6.1.4.1.5.1.1.25.11.1.13 | ScalaraccSrStpMaxAge | read-write | mandatory | The value of the Max Age parameter when the Bridge is the Root or attempting to become the Root. The Max Age parameter is conveyed to ensure that each Bridge i… |
| 1.3.6.1.4.1.5.1.1.25.11.1.14 | ScalaraccSrStpHelloTime | read-write | mandatory | Interval between Hello frames that this Bridge will initiate when it is Root or is attempting to be Root. |
| 1.3.6.1.4.1.5.1.1.25.11.1.15 | ScalaraccSrStpForwardDelay | read-write | mandatory | The time (seconds) spent in the Listening state while moving from the Blocking state to the Learning state. The time (seconds) spent in the Learning state whil… |
| 1.3.6.1.4.1.5.1.1.25.11.1.16 | ScalaraccSrStpUpTime | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.11.1.17 | ScalaraccSrStpTopChangeCnts | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.11.2 | NodeaccSrStpPortParms | |||
| 1.3.6.1.4.1.5.1.1.25.11.2.1 | ScalaraccSrStpPortState | read-only | mandatory | accSrStpPortState reports the operational status of the port. The learning state will only be reported if SRT bridging is enabled |
| 1.3.6.1.4.1.5.1.1.25.11.2.2 | ScalaraccSrStpPortPathCost | read-write | mandatory | Path cost |
| 1.3.6.1.4.1.5.1.1.25.11.2.3 | ScalaraccSrStpPortDesRoot | read-only | mandatory | Designated root |
| 1.3.6.1.4.1.5.1.1.25.11.2.4 | ScalaraccSrStpPortDesCost | read-only | mandatory | Cost to designated root |
| 1.3.6.1.4.1.5.1.1.25.11.2.5 | ScalaraccSrStpPortDesBridge | read-only | mandatory | Designated bridge |
| 1.3.6.1.4.1.5.1.1.25.11.2.6 | ScalaraccSrStpPortDesPort | read-only | mandatory | Designated port |
| 1.3.6.1.4.1.5.1.1.25.11.2.7 | ScalaraccSrStpPortPriority | read-write | mandatory | Relative STP priority of this port |
| 1.3.6.1.4.1.5.1.1.25.11.2.8 | ScalaraccSrStpPortInPkts | read-only | mandatory | Number of spanning tree packets recieved |
| 1.3.6.1.4.1.5.1.1.25.11.2.9 | ScalaraccSrStpPortOutPkts | read-only | mandatory | Number of spanning tree packets sent |
| 1.3.6.1.4.1.5.1.1.25.11.2.10 | ScalaraccSrStpPortAdmin | read-write | mandatory | accSrStpPortAdminStatus reports the administrative status of the STP port; an update to this variable requires a reset. When the STP mode is manual, the accSrS… |
| 1.3.6.1.4.1.5.1.1.25.12 | TableaccSrRingTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.12.1 | RowaccSrRingEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.25.12.1.1 | ColumnaccSrRingTblRingID | read-only | mandatory | The ring number of a Token Ring reachable across the Virtual Ring. |
| 1.3.6.1.4.1.5.1.1.25.12.1.2 | ColumnaccSrRingTblBridgeID | read-write | mandatory | The bridge ID used to reach a Token Ring across the Virtual Ring. |
| 1.3.6.1.4.1.5.1.1.25.12.1.3 | ColumnaccSrRingTblPortIndex | read-write | mandatory | The SR bridge port used to forward packets on the Virtual Ring. |
| 1.3.6.1.4.1.5.1.1.25.12.1.4 | ColumnaccSrRingTblMetric | read-write | mandatory | The number of hops to reach a Token Ring across the Virtual Ring. |
| 1.3.6.1.4.1.5.1.1.25.12.1.5 | ColumnaccSrRingTblAge | read-write | mandatory | The age, in seconds of this ring information. |
| 1.3.6.1.4.1.5.1.1.25.12.1.6 | ColumnaccSrRingTblNbrMacAddr | read-write | mandatory | The MAC address of the neighbor on the Virtual Ring used to reach a remote Token Ring. (currently only used for Ethernets) |
| 1.3.6.1.4.1.5.1.1.25.13 | TableaccSrFiltIITable | not-accessible | mandatory | A list of Filtering entries. |
| 1.3.6.1.4.1.5.1.1.25.13.1 | RowaccSrFiltIIEntry | not-accessible | mandatory | A Filtering entry which defines the SR action to be taken based upon the destination AND source MAC Addresses AFTER applying the address masks, port number, po… |
| 1.3.6.1.4.1.5.1.1.25.13.1.1 | ColumnaccSrFiltIIEntDstMacAddr | read-write | mandatory | Destination MAC Address of the Filtering entry. |
| 1.3.6.1.4.1.5.1.1.25.13.1.2 | ColumnaccSrFiltIIEntSrcMacAddr | read-write | mandatory | Source MAC Address of the Filtering entry. |
| 1.3.6.1.4.1.5.1.1.25.13.1.3 | ColumnaccSrFiltIIEntDisp | read-write | mandatory | Disposition of received Frame. Note that a Frame is never sent back out on the Port on which it was received. |
| 1.3.6.1.4.1.5.1.1.25.13.1.4 | ColumnaccSrFiltIIEntPort | read-write | mandatory | In all cases, the destination port of the received frame. |
| 1.3.6.1.4.1.5.1.1.25.13.1.5 | ColumnaccSrFiltIIEntLogicalOp | read-write | mandatory | Logical operation to be performed in conjunction with specified protocol. This is an optional parameter. |
| 1.3.6.1.4.1.5.1.1.25.13.1.6 | ColumnaccSrFiltIIEntProtocol | read-write | mandatory | Protocol to be used in conjunction with logical operation to determine the disposition of all received packets. |
| 1.3.6.1.4.1.5.1.1.25.13.1.7 | ColumnaccSrFiltIIEntDstMacAddrMask | read-write | mandatory | Destination MAC Address Mask for the Filtering entry. The mask is ANDed with the Destination address to determine that part of the MAC address which is used in… |
| 1.3.6.1.4.1.5.1.1.25.13.1.8 | ColumnaccSrFiltIIEntSrcMacAddrMask | read-write | mandatory | Source MAC Address Mask for the Filtering entry. The mask is ANDed with the Source address to determine that part of the MAC address which is used in the filte… |
| 1.3.6.1.4.1.5.1.1.25.14 | ScalaraccSrFiltIIDiscards | read-only | mandatory | The number of packets discarded as a result of bridge filtering. Maintained globally for all ports. |
| 1.3.6.1.4.1.5.1.1.25.15 | ScalaraccSrFiltIIEntries | read-only | mandatory | The number of entries currently in the bridge filtering table. The maximum number of entries is 150. |
| 1.3.6.1.4.1.5.1.1.26 | NodeaccSMDS | |||
| 1.3.6.1.4.1.5.1.1.26.1 | TableaccSmdsPortTable | not-accessible | mandatory | This table contains SMDS port parameters and state variables, one entry per SMDS port. |
| 1.3.6.1.4.1.5.1.1.26.1.1 | RowaccSmdsPortEntry | not-accessible | mandatory | This list contains SMDS port parameters and state variables. |
| 1.3.6.1.4.1.5.1.1.26.1.1.1 | ColumnaccSmdsPortIndex | read-only | mandatory | The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.5.1.1.26.1.1.2 | ColumnaccSmdsPortIA | read-write | mandatory | The value of this object specifies the SNI Individual address configured for this SIP interface port. |
| 1.3.6.1.4.1.5.1.1.26.2 | TableaccSipL3Table | not-accessible | mandatory | This table contains SIP L3 parameters and state variables, one entry per SIP port. |
| 1.3.6.1.4.1.5.1.1.26.2.1 | RowaccSipL3Entry | not-accessible | mandatory | This list contains SIP L3 parameters and state variables. |
| 1.3.6.1.4.1.5.1.1.26.2.1.1 | ColumnaccSipL3Index | read-only | mandatory | The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.5.1.1.26.2.1.2 | ColumnaccSipL3RcvIAs | read-only | mandatory | The total number of individually addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs. |
| 1.3.6.1.4.1.5.1.1.26.2.1.3 | ColumnaccSipL3RcvGAs | read-only | mandatory | The total number of group addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs. |
| 1.3.6.1.4.1.5.1.1.26.2.1.4 | ColumnaccSipL3UnkIAs | read-only | mandatory | The number of SIP Level 3 PDUs received from the remote system with invalid or unknown individual destination addresses (Destination Address Screening violatio… |
| 1.3.6.1.4.1.5.1.1.26.2.1.5 | ColumnaccSipL3UnkGAs | read-only | mandatory | The number of SIP Level 3 PDUs received from the remote system with invalid or unknown group addresses. (Destination Address Screening violations are not inclu… |
| 1.3.6.1.4.1.5.1.1.26.2.1.6 | ColumnaccSipL3SndIAs | read-only | mandatory | The number of individually addressed SIP Level 3 PDUs that have been sent by this system across the SNI. |
| 1.3.6.1.4.1.5.1.1.26.2.1.7 | ColumnaccSipL3SndGAs | read-only | mandatory | The number of group addressed SIP L3PDUs that have been sent by this system across the SNI. |
| 1.3.6.1.4.1.5.1.1.26.2.1.8 | ColumnaccSipL3Errors | read-only | mandatory | The total number of SIP Level 3 PDUs received from the remote system that were discovered to have errors (including protocol processing and bit errors but excl… |
| 1.3.6.1.4.1.5.1.1.26.2.1.9 | ColumnaccSipL3InvAddrs | read-only | mandatory | The number of SIP Level 3 PDUs received from the remote system that had the Source or Destination Address_Type subfields, (the four most significant bits of th… |
| 1.3.6.1.4.1.5.1.1.27 | NodeaccRload | |||
| 1.3.6.1.4.1.5.1.1.27.1 | TableaccRlSourceTable | not-accessible | mandatory | Table of host/filenames for remote loading of system application code. To delete an entry, set the value of accRlPriority to NULL for the desired instance. Exi… |
| 1.3.6.1.4.1.5.1.1.27.1.1 | RowaccRlSourceEntry | not-accessible | mandatory | Specific host/filename information |
| 1.3.6.1.4.1.5.1.1.27.1.1.1 | ColumnaccRlHostAddr | read-write | mandatory | IP address of host which contains the application file to be remote-loaded. |
| 1.3.6.1.4.1.5.1.1.27.1.1.2 | ColumnaccRlFilename | read-write | mandatory | ASCII filename of application file to be remote-loaded to unit. |
| 1.3.6.1.4.1.5.1.1.27.1.1.3 | ColumnaccRlPriority | read-write | mandatory | Priority of this entry. Attempts will be made to download from host/filename with lowest numerical value of priority first, then next lowest, etc. Range is lim… |
| 1.3.6.1.4.1.5.1.1.27.2 | ScalaraccNetload | read-write | mandatory | Setting this object to initiate causes the unit to attempt to load application code into local (execution) memory from a file in the accRlSourceTable. This cod… |
| 1.3.6.1.4.1.5.1.1.27.3 | ScalaraccDownload | read-write | mandatory | Setting this object to initiate causes the unit to load local EPROM with application code brought over the network from a file in the accRlSourceTable. |
| 1.3.6.1.4.1.5.1.1.27.4 | ScalaraccPromload | read-write | mandatory | Setting this object to initiate causes the unit to load local EPROM with diagnostics and the remote loader application brought over the network from a file cal… |
| 1.3.6.1.4.1.5.1.1.27.5 | NodeaccCfgLoad | |||
| 1.3.6.1.4.1.5.1.1.27.5.1 | ScalaraccCfgHost | read-write | mandatory | The IP address of the TFTP server to attempt a download from. This object is used in conjunction with accCfgFile & accCfgDisp to download configurations. |
| 1.3.6.1.4.1.5.1.1.27.5.2 | ScalaraccCfgFile | read-write | mandatory | The filename (include pathname) of the file on the TFTP server to download. This object is used in conjunction with accCfgHost & accCfgDisp to download configu… |
| 1.3.6.1.4.1.5.1.1.27.5.3 | ScalaraccCfgDisp | read-write | mandatory | The action to take following the successful TFTP download of a file. reset specifies that the downloaded file is a binary configuration file. The configuration… |
| 1.3.6.1.4.1.5.1.1.27.6 | NodeaccTftpStat | |||
| 1.3.6.1.4.1.5.1.1.27.6.1 | ScalaraccTftpStatus | read-only | mandatory | The state of the remote loader (client of TFTP). |
| 1.3.6.1.4.1.5.1.1.27.6.2 | ScalaraccTftpLocalFile | read-only | mandatory | The local filename used in the last upload/download. |
| 1.3.6.1.4.1.5.1.1.27.6.3 | ScalaraccTftpRemoteFile | read-only | mandatory | The remote filename used in the last download. |
| 1.3.6.1.4.1.5.1.1.27.6.4 | ScalaraccTftpOctetsTransferred | read-only | mandatory | The number of octets transferred in the last/current upload/download. |
| 1.3.6.1.4.1.5.1.1.27.6.5 | ScalaraccTftpLastMsg | read-only | mandatory | The contents of the last trap message generated by the remote loader. |
| 1.3.6.1.4.1.5.1.1.27.7 | NodeaccTftpCmd | |||
| 1.3.6.1.4.1.5.1.1.27.7.1 | ScalaraccTftpCmdReq | read-only | mandatory | TFTP command request. |
| 1.3.6.1.4.1.5.1.1.27.7.2 | ScalaraccTftpCmdHost | read-only | mandatory | TFTP command host. |
| 1.3.6.1.4.1.5.1.1.27.7.3 | ScalaraccTftpCmdRemote | read-only | mandatory | TFTP remote file name. |
| 1.3.6.1.4.1.5.1.1.27.7.4 | ScalaraccTftpCmdLocal | read-only | mandatory | TFTP local file name. |
| 1.3.6.1.4.1.5.1.1.28 | NodeaccAt | |||
| 1.3.6.1.4.1.5.1.1.28.1 | NodeaccAtNode | |||
| 1.3.6.1.4.1.5.1.1.28.1.1 | ScalaraccAtNodeAdState | read-write | mandatory | The administrative state of the AppleTalk router. If set to on(1), AppleTalk packets will be routed on ports which have been administratively enabled. If set t… |
| 1.3.6.1.4.1.5.1.1.28.1.2 | ScalaraccAtNodeChecksum | read-write | mandatory | The AppleTalk checksum mode. If set to on(1), output packets will be generated with the standard AppleTalk checksum. If set to off(2), output packets will be g… |
| 1.3.6.1.4.1.5.1.1.28.1.3 | ScalaraccAtNodeAarpExpire | read-write | mandatory | The AARP database expiration interval. AARP database entries which are not updated within this interval of time are deleted from the database. The default valu… |
| 1.3.6.1.4.1.5.1.1.28.2 | TableaccAtAarpTable | not-accessible | mandatory | The AARP database containing AppleTalk protocol to hardware address mappings. This view of the AARP database differs from the standard view as seen from the ex… |
| 1.3.6.1.4.1.5.1.1.28.2.1 | RowaccAtAarpEntry | not-accessible | mandatory | An AARP database entry which maps a particular AppleTalk protocol address into a MAC-layer hardware address. |
| 1.3.6.1.4.1.5.1.1.28.2.1.1 | ColumnaccAtAarpTabPort | read-only | mandatory | The logical port number of a directly-connected AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.2.1.2 | ColumnaccAtAarpTabMacAddr | read-only | mandatory | The 48-bit Ethernet or Token Ring MAC-layer address which corresponds to the AppleTalk network address. |
| 1.3.6.1.4.1.5.1.1.28.2.1.3 | ColumnaccAtAarpTabNetAddr | read-only | mandatory | The 24-bit AppleTalk network address consisting of a 16-bit network number and 8-bit node id. |
| 1.3.6.1.4.1.5.1.1.28.2.1.4 | ColumnaccAtAarpTabStatus | read-only | mandatory | The status of the entry. A status of dynamic(1) indicates the entry can be deleted when the expiration interval expires, a status of static(1) indicates the en… |
| 1.3.6.1.4.1.5.1.1.28.3 | TableaccAtAarpStatsTable | not-accessible | mandatory | AppleTalk Address Resolution Protocol (AARP) statistics maintained and reported on a per-port basis. |
| 1.3.6.1.4.1.5.1.1.28.3.1 | RowaccAtAarpStatsEntry | not-accessible | mandatory | The AARP statistics for a particular logical port. If the port is not connected to an AppleTalk network which uses AARP, all statistics will be reported with a… |
| 1.3.6.1.4.1.5.1.1.28.3.1.1 | ColumnaccAtAarpStatsInRequests | read-only | mandatory | The number of AARP request packets received. |
| 1.3.6.1.4.1.5.1.1.28.3.1.2 | ColumnaccAtAarpStatsInResponses | read-only | mandatory | The number of AARP response packets received. |
| 1.3.6.1.4.1.5.1.1.28.3.1.3 | ColumnaccAtAarpStatsInProbes | read-only | mandatory | The number of AARP probe packets received. |
| 1.3.6.1.4.1.5.1.1.28.3.1.4 | ColumnaccAtAarpStatsOutRequests | read-only | mandatory | The number of AARP request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.3.1.5 | ColumnaccAtAarpStatsOutResponses | read-only | mandatory | The number of AARP response packets sent. |
| 1.3.6.1.4.1.5.1.1.28.3.1.6 | ColumnaccAtAarpStatsOutProbes | read-only | mandatory | The number of AARP probe packets sent. |
| 1.3.6.1.4.1.5.1.1.28.3.1.7 | ColumnaccAtAarpStatsNoReplys | read-only | mandatory | The number of times an AARP request packet and its subsequent retransmissions received no response. |
| 1.3.6.1.4.1.5.1.1.28.3.1.8 | ColumnaccAtAarpStatsExpires | read-only | mandatory | The number of times an entry was deleted from the AARP database because the expiration interval had expired. |
| 1.3.6.1.4.1.5.1.1.28.3.1.9 | ColumnaccAtAarpStatsDiscards | read-only | mandatory | The number of queued output packets discarded because of an unanswered AARP request. |
| 1.3.6.1.4.1.5.1.1.28.3.1.10 | ColumnaccAtAarpStatsInErrors | read-only | mandatory | The number of AARP packets received which were invalid or which could not be processed because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.3.1.11 | ColumnaccAtAarpStatsOutErrors | read-only | mandatory | The number of AARP packets which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.4 | NodeaccAtAdbStats | |||
| 1.3.6.1.4.1.5.1.1.28.4.1 | ScalaraccAtAdbStatsCacheds | read-only | mandatory | The number of times the desired database entry was the first entry in the hash bucket (i.e., it had already been rotated to the beginning of the list of entrie… |
| 1.3.6.1.4.1.5.1.1.28.4.2 | ScalaraccAtAdbStatsRotates | read-only | mandatory | The number of times the desired database entry was not the first entry in the hash bucket and had to be rotated to the beginning of the list. |
| 1.3.6.1.4.1.5.1.1.28.4.3 | ScalaraccAtAdbStatsNoEntries | read-only | mandatory | The number of times the desired entry was not in the AARP database. |
| 1.3.6.1.4.1.5.1.1.28.4.4 | ScalaraccAtAdbStatsAdds | read-only | mandatory | The number of times a new entry was added to the AARP database. |
| 1.3.6.1.4.1.5.1.1.28.4.5 | ScalaraccAtAdbStatsUpdates | read-only | mandatory | The number of times an existing entry was updated. |
| 1.3.6.1.4.1.5.1.1.28.4.6 | ScalaraccAtAdbStatsDeletes | read-only | mandatory | The number of times an entry was deleted from the AARP database. |
| 1.3.6.1.4.1.5.1.1.28.4.7 | ScalaraccAtAdbStatsTrims | read-only | mandatory | The number of times the AARP database was trimmed to make room for a new entry. |
| 1.3.6.1.4.1.5.1.1.28.4.8 | ScalaraccAtAdbStatsDiscards | read-only | mandatory | The number of queued output packets discarded because the anchoring database entry was deleted. |
| 1.3.6.1.4.1.5.1.1.28.5 | NodeaccAtDdpStats | |||
| 1.3.6.1.4.1.5.1.1.28.5.1 | ScalaraccAtDdpStatsNoOutRoutes | read-only | mandatory | The number of output packets generated by local protocol handlers for which there was not route to the destination network. |
| 1.3.6.1.4.1.5.1.1.28.5.2 | ScalaraccAtDdpStatsInErrors | read-only | mandatory | The number of packets received which could not be delivered because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.5.3 | ScalaraccAtDdpStatsOutErrors | read-only | mandatory | The number of packets locally generated which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.6 | TableaccAtNetTable | not-accessible | mandatory | AppleTalk network configuration table stored in NVM. |
| 1.3.6.1.4.1.5.1.1.28.6.1 | RowaccAtNetEntry | not-accessible | mandatory | The information stored in NVM which defines an AppleTalk network or half-router serial port. This information supplements standard configuration parameters def… |
| 1.3.6.1.4.1.5.1.1.28.6.1.1 | ColumnaccAtNetTabProtocol | read-write | mandatory | The type of data-link protocol used. These types augment the standard definitions in the experimental branch of the MIB and are used to maintain conformity wit… |
| 1.3.6.1.4.1.5.1.1.28.6.1.2 | ColumnaccAtNetTabRtmpIncr | read-write | mandatory | The RTMP hop-count increment to be applied to packets forwarded via this port or routing tuples received received on this port. |
| 1.3.6.1.4.1.5.1.1.28.6.1.3 | ColumnaccAtNetTabRtmpSend | read-write | mandatory | The RTMP send interval for routing updates sent via this port. The RTMP send interval may be set to a higher value on serial ports to limit the amount of bandw… |
| 1.3.6.1.4.1.5.1.1.28.6.1.4 | ColumnaccAtNetTabX25Addr1 | read-write | mandatory | The normal DTE address to use for sending or receiving packets via an X.25 virtual circuit. |
| 1.3.6.1.4.1.5.1.1.28.6.1.5 | ColumnaccAtNetTabX25Addr2 | read-write | mandatory | An alternate DTE address to use for receiving packets via an X.25 virtual circuit. |
| 1.3.6.1.4.1.5.1.1.28.6.1.6 | ColumnaccAtNetTabX25Idle | read-write | mandatory | The interval which governs how long an X.25 circuit can be idle before it is cleared. |
| 1.3.6.1.4.1.5.1.1.28.6.1.7 | ColumnaccAtNetTabX25PktSize | read-write | mandatory | The desired packet size to be negotiated during X.25 call establishment. pktsize1(0), pktsize2(16), pktsize3(32), pktsize4(64), pktsize5(128), pktsize6(256), p… |
| 1.3.6.1.4.1.5.1.1.28.6.1.8 | ColumnaccAtNetTabX25WinSize | read-write | mandatory | The desired window size to be negotiated during X.25 call establishment. |
| 1.3.6.1.4.1.5.1.1.28.6.1.9 | ColumnaccAtNetTabX25FacIndex | read-write | mandatory | Index of optional facility string or zero. |
| 1.3.6.1.4.1.5.1.1.28.7 | TableaccAtPortTable | not-accessible | mandatory | The AppleTalk port table stored in RAM. For each valid network table entry configured in NVM when the port table is initialized (after system reset) there is a… |
| 1.3.6.1.4.1.5.1.1.28.7.1 | RowaccAtPortEntry | not-accessible | mandatory | The information maintained in RAM for a particular logical port. |
| 1.3.6.1.4.1.5.1.1.28.7.1.1 | ColumnaccAtPortTabIndex | read-only | mandatory | The logical port number. Only ports which were defined prior to the last system reset and whose configuration entries contained valid parameters are initialize… |
| 1.3.6.1.4.1.5.1.1.28.7.1.2 | ColumnaccAtPortTabNetAddr | read-only | mandatory | The ports DDP network address consisting of a 16-bit AppleTalk network number and 8-bit node id. This address is determined dynamically during port start up an… |
| 1.3.6.1.4.1.5.1.1.28.7.1.3 | ColumnaccAtPortTabState | read-only | mandatory | The operational state of the port. |
| 1.3.6.1.4.1.5.1.1.28.7.1.4 | ColumnaccAtPortTabDescr | read-only | mandatory | Displayable text describing the type of logical port. |
| 1.3.6.1.4.1.5.1.1.28.7.1.5 | ColumnaccAtPortTabErrCode | read-only | mandatory | An error code indicating why the logical port has been disabled. This value is set when the operational state (accAtPortTabState) of a port is set to error(11)… |
| 1.3.6.1.4.1.5.1.1.28.7.1.6 | ColumnaccAtPortTabErrTime | read-only | mandatory | The time (relative to the last system reset) at which the port became disabled. |
| 1.3.6.1.4.1.5.1.1.28.7.1.7 | ColumnaccAtPortTabErrAddr | read-only | mandatory | The DDP network address of a neighboring router or AppleTalk node which was the source of information causing the port to become disabled. The DDP address cons… |
| 1.3.6.1.4.1.5.1.1.28.7.1.8 | ColumnaccAtPortTabErrDescr | read-only | mandatory | Displayable text which describes why the port has been disabled. |
| 1.3.6.1.4.1.5.1.1.28.7.1.9 | ColumnaccAtPortTabErrCount | read-only | mandatory | The number of subsequent errors which have been detected while a port is disabled. |
| 1.3.6.1.4.1.5.1.1.28.8 | TableaccAtPortStatsTable | not-accessible | mandatory | Datagram Delivery Protocol (DDP) statistics maintained and reported on a per-port basis. |
| 1.3.6.1.4.1.5.1.1.28.8.1 | RowaccAtPortStatsEntry | not-accessible | mandatory | The DDP statistics maintained for a particular logical port. |
| 1.3.6.1.4.1.5.1.1.28.8.1.1 | ColumnaccAtPortStatsInTotals | read-only | mandatory | The total number of DDP packets received via the port. |
| 1.3.6.1.4.1.5.1.1.28.8.1.2 | ColumnaccAtPortStatsInShorts | read-only | mandatory | The total number of DDP packets received with short headers. |
| 1.3.6.1.4.1.5.1.1.28.8.1.3 | ColumnaccAtPortStatsNotForMes | read-only | mandatory | The number of Phase 1 unicast packets received with a LLAP header whose destination node id did not match that of the receiving port. |
| 1.3.6.1.4.1.5.1.1.28.8.1.4 | ColumnaccAtPortStatsTooShorts | read-only | mandatory | The number of DDP packets received whose length was less than that of a DDP header or whose physical length was less than the logical length. |
| 1.3.6.1.4.1.5.1.1.28.8.1.5 | ColumnaccAtPortStatsTooLongs | read-only | mandatory | The number of of DDP packets received whose length exceeded the maximum datagram size or whose physical length was greater than the logical length. |
| 1.3.6.1.4.1.5.1.1.28.8.1.6 | ColumnaccAtPortStatsChksums | read-only | mandatory | The number of DDP packets received with an invalid checksum. |
| 1.3.6.1.4.1.5.1.1.28.8.1.7 | ColumnaccAtPortStatsNotMyNets | read-only | mandatory | The number of DDP broadcast packets received whose destination network number was within the range of the connected network but which did not match the network… |
| 1.3.6.1.4.1.5.1.1.28.8.1.8 | ColumnaccAtPortStatsInFwdReqs | read-only | mandatory | The number of DDP packets received which were not addressed to the receiving port (although some may have been addressed to another port on the same router). |
| 1.3.6.1.4.1.5.1.1.28.8.1.9 | ColumnaccAtPortStatsFwdBcasts | read-only | mandatory | The number of DDP broadcast packets receive whose destination network number was not within the range of the connected network. |
| 1.3.6.1.4.1.5.1.1.28.8.1.10 | ColumnaccAtPortStatsNoFwdRoutes | read-only | mandatory | The number of DDP packets received for which no route to the destination network existed. |
| 1.3.6.1.4.1.5.1.1.28.8.1.11 | ColumnaccAtPortStatsHopCounts | read-only | mandatory | The number of DDP packets received which were discarded because the hop count had exceeded the maximum value. |
| 1.3.6.1.4.1.5.1.1.28.8.1.12 | ColumnaccAtPortStatsReflects | read-only | mandatory | The number of DDP packets received which were addressed to another node on the same network. |
| 1.3.6.1.4.1.5.1.1.28.8.1.13 | ColumnaccAtPortStatsOutTotals | read-only | mandatory | The total number of DDP packets sent via the port. |
| 1.3.6.1.4.1.5.1.1.28.8.1.14 | ColumnaccAtPortStatsOutShorts | read-only | mandatory | The number of DDP packets send with short headers. |
| 1.3.6.1.4.1.5.1.1.28.8.1.15 | ColumnaccAtPortStatsOutFwdReqs | read-only | mandatory | The number of DDP packets forwarded to this port from all other ports. |
| 1.3.6.1.4.1.5.1.1.28.8.1.16 | ColumnaccAtPortStatsInErrors | read-only | mandatory | The number of DDP packets received which could not be processed because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.8.1.17 | ColumnaccAtPortStatsOutErrors | read-only | mandatory | The number of DDP packets which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.9 | NodeaccAtRtmpStats | |||
| 1.3.6.1.4.1.5.1.1.28.9.1 | ScalaraccAtRtmpStatsInRequests | read-only | mandatory | The number of RTMP request packets received. |
| 1.3.6.1.4.1.5.1.1.28.9.2 | ScalaraccAtRtmpStatsInDataReqs | read-only | mandatory | The number of RTMP route data request packets received. |
| 1.3.6.1.4.1.5.1.1.28.9.3 | ScalaraccAtRtmpStatsInResponses | read-only | mandatory | The number of RTMP response packets received. |
| 1.3.6.1.4.1.5.1.1.28.9.4 | ScalaraccAtRtmpStatsInDataResps | read-only | mandatory | The number of RTMP route data response packets received. |
| 1.3.6.1.4.1.5.1.1.28.9.5 | ScalaraccAtRtmpStatsOutRequests | read-only | mandatory | The number of RTMP request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.9.6 | ScalaraccAtRtmpStatsOutDataReqs | read-only | mandatory | The number of RTMP route data request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.9.7 | ScalaraccAtRtmpStatsOutResponses | read-only | mandatory | The number of RTMP response packets sent. |
| 1.3.6.1.4.1.5.1.1.28.9.8 | ScalaraccAtRtmpStatsOutDataResps | read-only | mandatory | The number of RTMP route data response packets sent. |
| 1.3.6.1.4.1.5.1.1.28.9.9 | ScalaraccAtRtmpStatsNetConflicts | read-only | mandatory | The number of RTMP packets received which conflicted with the network number range configured for the receiving port or garnered from another router. |
| 1.3.6.1.4.1.5.1.1.28.9.10 | ScalaraccAtRtmpStatsInErrors | read-only | mandatory | The number of RTMP packets received containing a format error or which could not be processed because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.9.11 | ScalaraccAtRtmpStatsOutErrors | read-only | mandatory | The number of RTMP packets which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.10 | NodeaccAtRdbStats | |||
| 1.3.6.1.4.1.5.1.1.28.10.1 | ScalaraccAtRdbStatsCacheds | read-only | mandatory | The number of times the desired route was already cached. |
| 1.3.6.1.4.1.5.1.1.28.10.2 | ScalaraccAtRdbStatsSearchs | read-only | mandatory | The number of times the desired route was not cached and the routing database had to be searched. |
| 1.3.6.1.4.1.5.1.1.28.10.3 | ScalaraccAtRdbStatsNoRoutes | read-only | mandatory | The number of times no route could be found to the destination network. |
| 1.3.6.1.4.1.5.1.1.28.10.4 | ScalaraccAtRdbStatsAdds | read-only | mandatory | The number of times a new network was added to the routing database. |
| 1.3.6.1.4.1.5.1.1.28.10.5 | ScalaraccAtRdbStatsUpdates | read-only | mandatory | The number of times an existing route was updated. |
| 1.3.6.1.4.1.5.1.1.28.10.6 | ScalaraccAtRdbStatsDeletes | read-only | mandatory | The number of times a route was deleted from the routing database. |
| 1.3.6.1.4.1.5.1.1.28.11 | NodeaccAtNbpStats | |||
| 1.3.6.1.4.1.5.1.1.28.11.1 | ScalaraccAtNbpStatsInBrReqs | read-only | mandatory | The number of NBP broadcast request packets received. |
| 1.3.6.1.4.1.5.1.1.28.11.2 | ScalaraccAtNbpStatsInLkUpReqs | read-only | mandatory | The number of NBP lookup request packets received. |
| 1.3.6.1.4.1.5.1.1.28.11.3 | ScalaraccAtNbpStatsInLkUpResps | read-only | mandatory | The number of NBP lookup response packets received. |
| 1.3.6.1.4.1.5.1.1.28.11.4 | ScalaraccAtNbpStatsInFwdReqs | read-only | mandatory | The number of NBP forward request packets received. |
| 1.3.6.1.4.1.5.1.1.28.11.5 | ScalaraccAtNbpStatsOutBrReqs | read-only | mandatory | The number of NBP broadcast request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.11.6 | ScalaraccAtNbpStatsOutLkUpReqs | read-only | mandatory | The number of NBP lookup request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.11.7 | ScalaraccAtNbpStatsOutLkUpResps | read-only | mandatory | The number of NBP lookup response packets sent. |
| 1.3.6.1.4.1.5.1.1.28.11.8 | ScalaraccAtNbpStatsOutFwdReqs | read-only | mandatory | The number of NBP forward request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.11.9 | ScalaraccAtNbpStatsNoZones | read-only | mandatory | The number of NBP request packets received which referenced a zone name which was not in the zone database. |
| 1.3.6.1.4.1.5.1.1.28.11.10 | ScalaraccAtNbpStatsInErrors | read-only | mandatory | The number of NBP packets received which were invalid or which could not be processed because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.11.11 | ScalaraccAtNbpStatsOutErrors | read-only | mandatory | The number of NBP packets which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.12 | NodeaccAtZipStats | |||
| 1.3.6.1.4.1.5.1.1.28.12.1 | ScalaraccAtZipStatsInQuerys | read-only | mandatory | The number of ZIP zone-list-query packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.2 | ScalaraccAtZipStatsInReplies | read-only | mandatory | The number of ZIP zone-list-reply packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.3 | ScalaraccAtZipStatsInExtReplies | read-only | mandatory | The number of ZIP extended zone-list-reply packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.4 | ScalaraccAtZipStatsInInfoReqs | read-only | mandatory | The number of ZIP get-network-information request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.5 | ScalaraccAtZipStatsInInfoReps | read-only | mandatory | The number of ZIP get-network-information reply packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.6 | ScalaraccAtZipStatsInTakeDowns | read-only | mandatory | The number of ZIP take-down request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.7 | ScalaraccAtZipStatsInBringUps | read-only | mandatory | The number of ZIP bring-up request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.8 | ScalaraccAtZipStatsInNotifies | read-only | mandatory | The number of ZIP notify request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.9 | ScalaraccAtZipStatsInGetZLReqs | read-only | mandatory | The number of ZIP get-zone-list request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.10 | ScalaraccAtZipStatsInGetLZReqs | read-only | mandatory | The number of ZIP get-local-zones request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.11 | ScalaraccAtZipStatsInGetMZReqs | read-only | mandatory | The number of ZIP get-my-zone request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.12 | ScalaraccAtZipStatsOutQueries | read-only | mandatory | The number of ZIP zone-list-query packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.13 | ScalaraccAtZipStatsOutReplies | read-only | mandatory | The number of ZIP zone-list-reply packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.14 | ScalaraccAtZipStatsOutExtReplies | read-only | mandatory | The number of ZIP extended zone-list-reply packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.15 | ScalaraccAtZipStatsOutInfoReqs | read-only | mandatory | The number of ZIP get-network-information request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.16 | ScalaraccAtZipStatsOutInfoReps | read-only | mandatory | The number of ZIP get-network-information reply packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.17 | ScalaraccAtZipStatsOutGetZLReps | read-only | mandatory | The number of get-zone-list reply packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.18 | ScalaraccAtZipStatsOutGetLZReps | read-only | mandatory | The number of get-local-zones reply packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.19 | ScalaraccAtZipStatsOutGetMZReps | read-only | mandatory | The number of get-my-zone reply packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.20 | ScalaraccAtZipStatsZoneConflicts | read-only | mandatory | The number of ZIP packets received which conflicted with zone list or default zone information configured for the receiving port or garnered from another route… |
| 1.3.6.1.4.1.5.1.1.28.12.21 | ScalaraccAtZipStatsInErrors | read-only | mandatory | The number of ZIP packets received containing a formatting error or which could not be processed because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.12.22 | ScalaraccAtZipStatsOutErrors | read-only | mandatory | The number of ZIP packets which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.13 | NodeaccAtAepStats | |||
| 1.3.6.1.4.1.5.1.1.28.13.1 | ScalaraccAtAepStatsInErrors | read-only | mandatory | The number of AEP packets received which were invalid or which could not be processed because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.13.2 | ScalaraccAtAepStatsOutErrors | read-only | mandatory | The number of AEP packets which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.14 | TableaccAtZoneListTable | not-accessible | mandatory | The zones list table for directly-connected AppleTalk networks. AppleTalk networks which are configured in the network table have their zones list configured h… |
| 1.3.6.1.4.1.5.1.1.28.14.1 | RowaccAtZoneListEntry | not-accessible | mandatory | An entry defining a zone name for some directly connected AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.14.1.1 | ColumnaccAtZoneListPort | read-only | mandatory | The logical port number. |
| 1.3.6.1.4.1.5.1.1.28.14.1.2 | ColumnaccAtZoneListStatus | read-write | mandatory | The status of the zone list entry. If set to default(2), the entry defines the default zone. Entries are deleted by setting the entry status to invalid(3). |
| 1.3.6.1.4.1.5.1.1.28.14.1.3 | ColumnaccAtZoneListName | read-only | mandatory | The zone name. Zone names can contain up to 32 case-insensitive characters from the Apple Macintosh character set. |
| 1.3.6.1.4.1.5.1.1.28.15 | TableaccAtZoneBynameTable | not-accessible | mandatory | Used to display entries in the Zone Information Table (ZIT) which are associated with a particular zone name. |
| 1.3.6.1.4.1.5.1.1.28.15.1 | RowaccAtZoneBynameEntry | not-accessible | mandatory | An entry in the zone information table (ZIT) with a given zone name. |
| 1.3.6.1.4.1.5.1.1.28.15.1.1 | ColumnaccAtZoneBynameNetMin | read-only | mandatory | The 16-bit range start value for an AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.15.1.2 | ColumnaccAtZoneBynameNetMax | read-only | mandatory | The 16-bit range end value for an AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.15.1.3 | ColumnaccAtZoneBynameName | read-only | mandatory | The AppleTalk zone name. |
| 1.3.6.1.4.1.5.1.1.28.16 | TableaccAtZoneBynetTable | not-accessible | mandatory | Used to display entries in the Zone Information Table (ZIT) which are associated with a particular AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.16.1 | RowaccAtZoneBynetEntry | not-accessible | mandatory | An entry in the zone information table (ZIT) associated with a given AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.16.1.1 | ColumnaccAtZoneBynetNetMin | read-only | mandatory | The 16-bit range start value for an AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.16.1.2 | ColumnaccAtZoneBynetNetMax | read-only | mandatory | The 16-bit range end value for an AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.16.1.3 | ColumnaccAtZoneBynetName | read-only | mandatory | The AppleTalk zone name. |
| 1.3.6.1.4.1.5.1.1.28.17 | TableaccAtForwardFilterTable | not-accessible | mandatory | A list of descriptions of specific AppleTalk Filters. |
| 1.3.6.1.4.1.5.1.1.28.17.1 | RowaccAtForwardFilterEntry | not-accessible | mandatory | The parameters for a single AppleTalk Filter. |
| 1.3.6.1.4.1.5.1.1.28.17.1.1 | ColumnaccAtForwardFilterToMin | read-write | mandatory | The least value in the destination network address range. |
| 1.3.6.1.4.1.5.1.1.28.17.1.2 | ColumnaccAtForwardFilterToMax | read-write | mandatory | The greatest value in the destination network address range. |
| 1.3.6.1.4.1.5.1.1.28.17.1.3 | ColumnaccAtForwardFilterFromMin | read-write | mandatory | The least value in the source network address range. |
| 1.3.6.1.4.1.5.1.1.28.17.1.4 | ColumnaccAtForwardFilterFromMax | read-write | mandatory | The greatest value in the source network address range. |
| 1.3.6.1.4.1.5.1.1.28.17.1.5 | ColumnaccAtForwardFilterSocketMin | read-write | mandatory | The least value in the range of affected sockets. |
| 1.3.6.1.4.1.5.1.1.28.17.1.6 | ColumnaccAtForwardFilterSocketMax | read-write | mandatory | The greatest value in the range of affected sockets. |
| 1.3.6.1.4.1.5.1.1.28.17.1.7 | ColumnaccAtForwardFilterType | read-write | mandatory | The affected message types. Name Binding Protocol messages are called out separately, as some applications call for selective discrimination. |
| 1.3.6.1.4.1.5.1.1.28.17.1.8 | ColumnaccAtForwardFilterDisposition | read-write | mandatory | Upon a filter match, this specifies the action taken. discard(0), lowPriority(1), normalPriority(2), highPriority(3) |
| 1.3.6.1.4.1.5.1.1.28.17.1.9 | ColumnaccAtForwardFilterStatus | read-write | mandatory | Writing 'invalid' deletes the filter table entry. |
| 1.3.6.1.4.1.5.1.1.28.18 | TableaccAtRouteFilterTable | not-accessible | mandatory | A list of Route Filters. |
| 1.3.6.1.4.1.5.1.1.28.18.1 | RowaccAtRouteFilterEntry | not-accessible | mandatory | A single Route Filter. |
| 1.3.6.1.4.1.5.1.1.28.18.1.1 | ColumnaccAtRouteFilterRouterMin | read-write | mandatory | The least affected Router's Network Address. |
| 1.3.6.1.4.1.5.1.1.28.18.1.2 | ColumnaccAtRouteFilterRouterMax | read-write | mandatory | The greatest affected Router's Network Address. |
| 1.3.6.1.4.1.5.1.1.28.18.1.3 | ColumnaccAtRouteFilterRangeMin | read-write | mandatory | The least Network Address in this range. |
| 1.3.6.1.4.1.5.1.1.28.18.1.4 | ColumnaccAtRouteFilterRangeMax | read-write | mandatory | The greatest Network Address in this range. |
| 1.3.6.1.4.1.5.1.1.28.18.1.5 | ColumnaccAtRouteFilterDisposition | read-write | mandatory | What is to be done with matching advertisements. |
| 1.3.6.1.4.1.5.1.1.28.18.1.6 | ColumnaccAtRouteFilterStatus | read-write | mandatory | Writing 'invalid' has the effect of deleting the filter. |
| 1.3.6.1.4.1.5.1.1.29 | NodeaccBootp | |||
| 1.3.6.1.4.1.5.1.1.29.1 | NodeaccBootServerOld | |||
| 1.3.6.1.4.1.5.1.1.29.1.1 | ScalaraccBootpServerOld | read-only | mandatory | IP address of the Bootp Server. |
| 1.3.6.1.4.1.5.1.1.29.2 | ScalaraccBootMode | read-only | mandatory | Mode of operation on unit boot-up. Automatic - stored configuration information is ignored and configuration is sought from the last known server or via BOOTP … |
| 1.3.6.1.4.1.5.1.1.29.3 | ScalaraccBootState | read-only | mandatory | The state of Bootp client operation: initial - client initializing after start-up. disabled - client operation is disabled (Boot Mode Off). requesting - BootP … |
| 1.3.6.1.4.1.5.1.1.29.4 | ScalaraccBootyiaddr | read-only | mandatory | The value of yiaddr returned in the last Bootp reply processed. This is the address used by the unit as its address in the TFTP download of a configuration scr… |
| 1.3.6.1.4.1.5.1.1.29.5 | ScalaraccBootsiaddr | read-only | mandatory | The value of siaddr returned in the last Bootp reply processed. This is the address used by the unit as the server address from which the TFTP download of a co… |
| 1.3.6.1.4.1.5.1.1.29.6 | ScalaraccBootsname | read-only | mandatory | The value of siaddr returned in the last Bootp reply processed. This is the name of the Bootp server. |
| 1.3.6.1.4.1.5.1.1.29.7 | ScalaraccBootgiaddr | read-only | deprecated | The value of giaddr returned in the last Bootp reply processed. This is the address used by the unit as the address of any intermediate gateway between the uni… |
| 1.3.6.1.4.1.5.1.1.29.8 | ScalaraccBootfile | read-only | mandatory | The value of file returned in the last Bootp reply processed. This is the name of the file to download as a configuration script. |
| 1.3.6.1.4.1.5.1.1.29.9 | ScalaraccBootInterface | read-only | mandatory | The interface index for the interface the last valid Bootp reply frame processed was received on. |
| 1.3.6.1.4.1.5.1.1.29.10 | ScalaraccBootSentRequests | read-only | mandatory | The number of Bootp requests sent. |
| 1.3.6.1.4.1.5.1.1.29.11 | ScalaraccBootReceivedReplies | read-only | mandatory | The number of valid Bootp replies received. |
| 1.3.6.1.4.1.5.1.1.29.12 | ScalaraccBootDiscardedReplies | read-only | mandatory | The number of Bootp replies discarded due to insufficient data in reply. |
| 1.3.6.1.4.1.5.1.1.29.13 | TableaccBootServerTable | not-accessible | mandatory | A table of Bootpstrap protocol servers that this unit will forward Bootp requests to. |
| 1.3.6.1.4.1.5.1.1.29.13.1 | RowaccBootServerEntry | not-accessible | mandatory | A Boot server table entry. |
| 1.3.6.1.4.1.5.1.1.29.13.1.1 | ColumnaccBootServerIPAddr | read-write | mandatory | An IP address of a Bootstrap protocol server to be supported by Boot Helper. |
| 1.3.6.1.4.1.5.1.1.29.14 | ScalaraccBootg1iaddr | read-only | mandatory | The value of first giaddr returned in the last Bootp reply processed. This is the first address used by the unit as the address of any intermediate gateway bet… |
| 1.3.6.1.4.1.5.1.1.29.15 | ScalaraccBootg2iaddr | read-only | mandatory | The value of second giaddr returned in the last Bootp reply processed. This is the second address used by the unit as the address of any intermediate gateway b… |
| 1.3.6.1.4.1.5.1.1.29.16 | ScalaraccBootg3iaddr | read-only | mandatory | The value of third giaddr returned in the last Bootp reply processed. This is the third address used by the unit as the address of any intermediate gateway bet… |
| 1.3.6.1.4.1.5.1.1.30 | NodeaccPing | |||
| 1.3.6.1.4.1.5.1.1.30.1 | ScalaraccPingDest | read-write | mandatory | IP address of the destination for generated Ping packets. |
| 1.3.6.1.4.1.5.1.1.30.2 | ScalaraccPingReqCnt | read-write | mandatory | Count of Ping packets left to be generated. Setting this variable to a nonzero value causes the Ping generator to be (re)started. Setting this variable to zero… |
| 1.3.6.1.4.1.5.1.1.30.3 | ScalaraccPingDataMin | read-write | mandatory | Minimum number of data bytes included in the Ping packet. The first four bytes of data always carry a timestamp, the remaining data is an incrementing byte dat… |
| 1.3.6.1.4.1.5.1.1.30.4 | ScalaraccPingDataMax | read-write | mandatory | Maximum number of data bytes included in the Ping packet. If this value is greater than accPingDataMin, the data field length of the Ping packet is a random va… |
| 1.3.6.1.4.1.5.1.1.30.5 | ScalaraccPingTimeMin | read-write | mandatory | Time (seconds) to delay before generating the next Ping packet, after correctly receiving the expected Ping response for the previously generated Ping packet. |
| 1.3.6.1.4.1.5.1.1.30.6 | ScalaraccPingTimeMax | read-write | mandatory | Time (seconds) to wait for a correct Ping response before giving up and generating the next Ping packet. |
| 1.3.6.1.4.1.5.1.1.30.7 | ScalaraccPingSndPkts | read-only | mandatory | Number of Ping packets generated since the current Ping activity was initiated. |
| 1.3.6.1.4.1.5.1.1.30.8 | ScalaraccPingSndBytes | read-only | mandatory | Number of Ping data bytes generated since the current Ping activity was initiated. |
| 1.3.6.1.4.1.5.1.1.30.9 | ScalaraccPingRcvPkts | read-only | mandatory | Number of Ping responses received since the current Ping activity was initiated. |
| 1.3.6.1.4.1.5.1.1.30.10 | ScalaraccPingRcvBytes | read-only | mandatory | Number of Ping data bytes received since the current Ping activity was initiated. |
| 1.3.6.1.4.1.5.1.1.30.11 | ScalaraccPingRcvOKs | read-only | mandatory | Number of correct Ping responses received since the current Ping activity was initiated. |
| 1.3.6.1.4.1.5.1.1.30.12 | ScalaraccPingRcvBads | read-only | mandatory | Number of incorrect Ping responses received since the current Ping activity was initiated. |
| 1.3.6.1.4.1.5.1.1.30.13 | ScalaraccPingDelayMin | read-only | mandatory | Minimum round trip delay, in milliseconds, experienced by the Ping packet and the Ping response. |
| 1.3.6.1.4.1.5.1.1.30.14 | ScalaraccPingDelayMax | read-only | mandatory | Maximum round trip delay, in milliseconds, experienced by the Ping packet and the Ping response. |
| 1.3.6.1.4.1.5.1.1.30.15 | ScalaraccPingDelayAvg | read-only | mandatory | Average round trip delay, in milliseconds, experienced by the Ping packet and the Ping response. |
| 1.3.6.1.4.1.5.1.1.31 | NodeaccDial | |||
| 1.3.6.1.4.1.5.1.1.31.1 | TableaccDialBackupTable | not-accessible | mandatory | A list of associations between physical ports. |
| 1.3.6.1.4.1.5.1.1.31.1.1 | RowaccDialBackupEntry | not-accessible | mandatory | An association between two ports. |
| 1.3.6.1.4.1.5.1.1.31.1.1.1 | ColumnaccDialBackupPort | read-write | mandatory | The ifIndex value of the port backing up the primary port. |
| 1.3.6.1.4.1.5.1.1.31.1.1.2 | ColumnaccDialBackupPrimary | read-only | mandatory | The ifIndex value of the port backed up. |
| 1.3.6.1.4.1.5.1.1.31.1.1.3 | ColumnaccDialBackupControl | read-write | mandatory | Backup Control indicates under what conditions a call is placed or accepted. |
| 1.3.6.1.4.1.5.1.1.31.1.1.4 | ColumnaccDialBackupRetry | read-write | mandatory | The number of seconds the system will wait be- fore retrying a failed call. |
| 1.3.6.1.4.1.5.1.1.31.1.1.5 | ColumnaccDialBackupDamp | read-write | mandatory | Damping factor. |
| 1.3.6.1.4.1.5.1.1.31.1.1.6 | ColumnaccDialBackupCallCongestion | read-write | mandatory | If the average octet rate transmitted (or, on a master, received) exceeds this percentage times the ifSpeed of the primary link, a call will be placed. |
| 1.3.6.1.4.1.5.1.1.31.1.1.7 | ColumnaccDialBackupClearCongestion | read-write | mandatory | If the sum of the primary and backup link's average octet rates (transmitted or, on a mas- ter, received) falls below this percentage times the ifSpeed of the … |
| 1.3.6.1.4.1.5.1.1.31.1.1.8 | ColumnaccDialBackupCallError | read-write | mandatory | If the average sum of ifInDiscards, ifInEr- rors, ifOutDiscards, ifOutErrors, accLapbStat- BadFCSIns, accLapbStatT1Timeouts, accLapbSta- tREJIns, and accLapbSt… |
| 1.3.6.1.4.1.5.1.1.31.1.1.9 | ColumnaccDialBackupCallAddress | read-write | mandatory | The address to be called, in ASCII. No validation is performed on this variable. |
| 1.3.6.1.4.1.5.1.1.31.1.1.10 | ColumnaccDialBackupStatus | read-write | mandatory | If this object is set to 'invalid', the entry is deleted. |
| 1.3.6.1.4.1.5.1.1.31.1.1.11 | ColumnaccDialBackupState | read-write | mandatory | The current call state from the primary link's perspective. The only values acceptable on a SET are 'manual' and 'clear'. If 'manual' is SET, the backup link w… |
| 1.3.6.1.4.1.5.1.1.31.2 | TableaccDialPortTable | not-accessible | mandatory | A table containing DOD-port specific variables for this DOD implementation. |
| 1.3.6.1.4.1.5.1.1.31.2.1 | RowaccDialPortEntry | not-accessible | mandatory | Management information about a particular DOD Port. |
| 1.3.6.1.4.1.5.1.1.31.2.1.1 | ColumnaccDialPortIndex | read-only | mandatory | Dial port number |
| 1.3.6.1.4.1.5.1.1.31.2.1.2 | ColumnaccDialPortContents | read-only | mandatory | Setting this object to invalid deletes dial port or call address or physical port. |
| 1.3.6.1.4.1.5.1.1.31.2.1.3 | ColumnaccDialPortStationType | read-write | mandatory | Type of station for this dial port. Master can place calls, slave can accept calls, demand can do both. |
| 1.3.6.1.4.1.5.1.1.31.2.1.4 | ColumnaccDialPortAdminState | read-write | mandatory | The administrative state of this dial port. |
| 1.3.6.1.4.1.5.1.1.31.2.1.5 | ColumnaccDialPortCallState | read-write | mandatory | The dial state of this dial port. This is more of a operator request than a state. Depending on the current state of the dial port the command that sets the va… |
| 1.3.6.1.4.1.5.1.1.31.2.1.6 | ColumnaccDialPortRetryInterval | read-write | mandatory | Number of seconds allowed to elapse between two dial attempts. |
| 1.3.6.1.4.1.5.1.1.31.2.1.7 | ColumnaccDialPortRetryCount | read-write | mandatory | Total number of dial attempts. |
| 1.3.6.1.4.1.5.1.1.31.2.1.8 | ColumnaccDialPortClearingInterv | read-write | mandatory | Number of seconds to wait with no traffic to hangup this dial session. |
| 1.3.6.1.4.1.5.1.1.31.2.1.9 | ColumnaccDialPortMessageLevel | read-write | mandatory | Current message level for how much to display for this dial port. 1 - Error messages. 2 - Unused + 1. 3 - Warning messages + 2. 4 - Unused + 3. 5 - Dial activi… |
| 1.3.6.1.4.1.5.1.1.31.2.1.10 | ColumnaccDialPortPhysicalPort | write-only | mandatory | One of the possible physical ports this dial port may associate. |
| 1.3.6.1.4.1.5.1.1.31.2.1.11 | ColumnaccDialPortCallAddress | write-only | mandatory | One of the possible call addresses this dial port may call. |
| 1.3.6.1.4.1.5.1.1.31.2.1.12 | ColumnaccDialPortPhysicalPortStr | read-only | mandatory | The concatenated string of all physical ports associated with this dial port. |
| 1.3.6.1.4.1.5.1.1.31.2.1.13 | ColumnaccDialPortCallAddressStr | read-only | mandatory | The concatenated string of all call address/name entries associated with this dial port. |
| 1.3.6.1.4.1.5.1.1.31.2.1.14 | ColumnaccDialPortPassword | write-only | mandatory | The password associated with the call address. |
| 1.3.6.1.4.1.5.1.1.31.2.1.15 | ColumnaccDialPortName | write-only | mandatory | The name associated with the call address. The combination of name and password is used for the outbound PAP negotiation. |
| 1.3.6.1.4.1.5.1.1.31.3 | TableaccDialPortStatTable | not-accessible | mandatory | A table containing the operational parameters for this dial port. |
| 1.3.6.1.4.1.5.1.1.31.3.1 | RowaccDialPortStatEntry | not-accessible | mandatory | Current status for this dial port. |
| 1.3.6.1.4.1.5.1.1.31.3.1.1 | ColumnaccDialPortStatIndex | read-only | mandatory | Dial port number. |
| 1.3.6.1.4.1.5.1.1.31.3.1.2 | ColumnaccDialPortStatActPhysPort | read-only | mandatory | The physical port currently connected with or recently connected with. |
| 1.3.6.1.4.1.5.1.1.31.3.1.3 | ColumnaccDialPortStatState | read-write | mandatory | The current state of this dial port. The following is a list of valid states: down(0), disconnected(1), queued(2), answering(3), dialing(4), connected(5) |
| 1.3.6.1.4.1.5.1.1.31.3.1.4 | ColumnaccDialPortStatTrigFwdr | read-only | mandatory | Application which started this dial session. The following is a list of applications: none(0), management(1), inbound(2), ip(33), idp(37), decnet(39), appletal… |
| 1.3.6.1.4.1.5.1.1.31.3.1.5 | ColumnaccDialPortStatElapsedTime | read-only | mandatory | Number of seconds that this dial port has been in the current state. |
| 1.3.6.1.4.1.5.1.1.31.3.1.6 | ColumnaccDialPortStatTrigSrcAddr | read-only | mandatory | Source address of forwarder message that started this dial session. |
| 1.3.6.1.4.1.5.1.1.31.3.1.7 | ColumnaccDialPortStatTrigCallAddr | read-only | mandatory | Phone number connected to during this dial session or the last dial session. |
| 1.3.6.1.4.1.5.1.1.31.3.1.8 | ColumnaccDialPortStatSuccessOut | read-only | mandatory | Number of successfull outgoing calls on this dial port. |
| 1.3.6.1.4.1.5.1.1.31.3.1.9 | ColumnaccDialPortStatUnsuccessOut | read-only | mandatory | Number of unsuccessfull call attempts on this dial port. |
| 1.3.6.1.4.1.5.1.1.31.3.1.10 | ColumnaccDialPortStatSuccessIn | read-only | mandatory | Number of successfull incoming calls on this dial port. |
| 1.3.6.1.4.1.5.1.1.31.3.1.11 | ColumnaccDialPortStatUnsuccessIn | read-only | mandatory | Total number of unsuccessfull incoming calls. |
| 1.3.6.1.4.1.5.1.1.31.4 | TableaccDialOrigAtTable | not-accessible | mandatory | A table containing dial originate database for Appletalk. |
| 1.3.6.1.4.1.5.1.1.31.4.1 | RowaccDialOrigAtEntry | not-accessible | mandatory | Dial originate information entry for Appletalk. |
| 1.3.6.1.4.1.5.1.1.31.4.1.1 | ColumnaccDialOrigAtStatus | write-only | mandatory | Writing 'invalid' deletes the filter table entry. |
| 1.3.6.1.4.1.5.1.1.31.4.1.2 | ColumnaccDialOrigAtDestStart | read-write | mandatory | Destination range start for this Appletalk entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.4.1.3 | ColumnaccDialOrigAtDestEnd | read-write | mandatory | Destination range end for this Appletalk entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.4.1.4 | ColumnaccDialOrigAtSourceStart | read-write | mandatory | Source range start for this Appletalk entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.4.1.5 | ColumnaccDialOrigAtSourceEnd | read-write | mandatory | Source range end for this Appletalk entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.4.1.6 | ColumnaccDialOrigAtTraffic | read-write | mandatory | Traffic info for this Appletalk entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.4.1.7 | ColumnaccDialOrigAtAction | read-write | mandatory | Allow-disallow info for this Appletalk entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.5 | TableaccDialOrigDnTable | not-accessible | mandatory | A table containing dial originate database for Decnet. |
| 1.3.6.1.4.1.5.1.1.31.5.1 | RowaccDialOrigDnEntry | not-accessible | mandatory | Dial originate information entry for Decnet. |
| 1.3.6.1.4.1.5.1.1.31.5.1.1 | ColumnaccDialOrigDnStatus | write-only | mandatory | Writing 'invalid' deletes the filter table entry. |
| 1.3.6.1.4.1.5.1.1.31.5.1.2 | ColumnaccDialOrigDnDestAddr | read-write | mandatory | Destination address for this Decnet entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.5.1.3 | ColumnaccDialOrigDnSourceAddr | read-write | mandatory | Source address for this Decnet entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.5.1.4 | ColumnaccDialOrigDnAction | read-write | mandatory | Allow-disallow info for this Decnet entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.6 | TableaccDialOrigBrTable | not-accessible | mandatory | A table containing dial originate database for Bridge. |
| 1.3.6.1.4.1.5.1.1.31.6.1 | RowaccDialOrigBrEntry | not-accessible | mandatory | Dial originate information entry for Bridge. |
| 1.3.6.1.4.1.5.1.1.31.6.1.1 | ColumnaccDialOrigBrStatus | write-only | mandatory | Writing 'invalid' deletes the filter table entry. |
| 1.3.6.1.4.1.5.1.1.31.6.1.2 | ColumnaccDialOrigBrDestMacAddr | read-write | mandatory | Destination mac address start for this Bridge entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.6.1.3 | ColumnaccDialOrigBrSourceMacAddr | read-write | mandatory | Source mac address for this Bridge entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.6.1.4 | ColumnaccDialOrigBrAction | read-write | mandatory | Allow-disallow info for this Bridge entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.7 | TableaccDialOrigIdpTable | not-accessible | mandatory | A table containing dial originate database for Idp. |
| 1.3.6.1.4.1.5.1.1.31.7.1 | RowaccDialOrigIdpEntry | not-accessible | mandatory | Dial originate information entry for Idp. |
| 1.3.6.1.4.1.5.1.1.31.7.1.1 | ColumnaccDialOrigIdpStatus | write-only | mandatory | Writing 'invalid' deletes the filter table entry. |
| 1.3.6.1.4.1.5.1.1.31.7.1.2 | ColumnaccDialOrigIdpDestNet | read-write | mandatory | Destination network for this Idp entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.7.1.3 | ColumnaccDialOrigIdpSourceNet | read-write | mandatory | Source network for this Idp entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.7.1.4 | ColumnaccDialOrigIdpAction | read-write | mandatory | Allow-disallow info for this Idp entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.8 | TableaccDialOrigIpTable | not-accessible | mandatory | A table containing dial originate database for Ip. |
| 1.3.6.1.4.1.5.1.1.31.8.1 | RowaccDialOrigIpEntry | not-accessible | mandatory | Dial originate information entry for Ip. |
| 1.3.6.1.4.1.5.1.1.31.8.1.1 | ColumnaccDialOrigIpStatus | write-only | mandatory | Writing 'invalid' deletes the filter table entry. |
| 1.3.6.1.4.1.5.1.1.31.8.1.2 | ColumnaccDialOrigIpDestAddr | read-write | mandatory | Destination address for this Ip entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.8.1.3 | ColumnaccDialOrigIpDestMask | read-write | mandatory | Destination mask for this Ip entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.8.1.4 | ColumnaccDialOrigIpSourceAddr | read-write | mandatory | Source address for this Ip entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.8.1.5 | ColumnaccDialOrigIpSourceMask | read-write | mandatory | Source mask for this Ip entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.8.1.6 | ColumnaccDialOrigIpParm | read-write | mandatory | Filter parameters; Byte 0 is Operation 1 [0,1,2] = [None, !,=] Bytes 1,2 is Protocol Byte 3 is Operation 2 [0 = none [1,2,3,4] = both [!, <, >, =] [5,6,7,8] = … |
| 1.3.6.1.4.1.5.1.1.31.8.1.7 | ColumnaccDialOrigIpAction | read-write | mandatory | Allow-disallow info for this Ip entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.9 | TableaccDialOrigIpxTable | not-accessible | mandatory | A table containing dial originate database for Ipx. |
| 1.3.6.1.4.1.5.1.1.31.9.1 | RowaccDialOrigIpxEntry | not-accessible | mandatory | Dial originate information entry for Ipx. |
| 1.3.6.1.4.1.5.1.1.31.9.1.1 | ColumnaccDialOrigIpxStatus | write-only | mandatory | Writing 'invalid' deletes the filter table entry. |
| 1.3.6.1.4.1.5.1.1.31.9.1.2 | ColumnaccDialOrigIpxDestNet | read-write | mandatory | Destination network for this Ipx entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.9.1.3 | ColumnaccDialOrigIpxSourceNet | read-write | mandatory | Source network for this Ipx entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.9.1.4 | ColumnaccDialOrigIpxAction | read-write | mandatory | Allow-disallow info for this Ipx entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.10 | TableaccDialOrigSrTable | not-accessible | mandatory | A table containing dial originate database for Sr. |
| 1.3.6.1.4.1.5.1.1.31.10.1 | RowaccDialOrigSrEntry | not-accessible | mandatory | Dial originate information entry for Sr. |
| 1.3.6.1.4.1.5.1.1.31.10.1.1 | ColumnaccDialOrigSrStatus | write-only | mandatory | Writing 'invalid' deletes the filter table entry. |
| 1.3.6.1.4.1.5.1.1.31.10.1.2 | ColumnaccDialOrigSrDestMacAddr | read-write | mandatory | Destination mac address for this Sr entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.10.1.3 | ColumnaccDialOrigSrSourceMacAddr | read-write | mandatory | Source mac address for this Sr entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.31.10.1.4 | ColumnaccDialOrigSrAction | read-write | mandatory | Allow-disallow info for this Sr entry in the dial originate database. |
| 1.3.6.1.4.1.5.1.1.32 | NodeaccPpp | |||
| 1.3.6.1.4.1.5.1.1.32.1 | TableaccPppLinkTable | not-accessible | mandatory | A table containing PPP-link specific variables for this PPP implementation. |
| 1.3.6.1.4.1.5.1.1.32.1.1 | RowaccPppLinkEntry | not-accessible | mandatory | Management information about a particular PPP Link. |
| 1.3.6.1.4.1.5.1.1.32.1.1.1 | ColumnaccPppLinkIndex | read-only | mandatory | Interface number |
| 1.3.6.1.4.1.5.1.1.32.1.1.2 | ColumnaccPppLinkPhysicalIndex | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.3 | ColumnaccPppLinkBadAddresses | read-only | mandatory | The number of packets received with an incorrect Address Field. |
| 1.3.6.1.4.1.5.1.1.32.1.1.4 | ColumnaccPppLinkBadControls | read-only | mandatory | The number of packets received on this link with an incorrect Control Field. |
| 1.3.6.1.4.1.5.1.1.32.1.1.5 | ColumnaccPppLinkPacketTooLongs | read-only | mandatory | The number of received packets that have been discarded because their length exceeded the MRU. |
| 1.3.6.1.4.1.5.1.1.32.1.1.6 | ColumnaccPppLinkBadFCSs | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.7 | ColumnaccPppLinkLocalMRU | read-only | mandatory | The final negotiated MRU value for the local PPP Entity. This value is the MRU that the remote entity has accepted for the local PPP entity. |
| 1.3.6.1.4.1.5.1.1.32.1.1.8 | ColumnaccPppLinkRemoteMRU | read-only | mandatory | The final negotiated MRU value for the remote PPP Entity. |
| 1.3.6.1.4.1.5.1.1.32.1.1.9 | ColumnaccPppLinkLocalToPeerACCMap | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.10 | ColumnaccPppLinkPeerToLocalACCMap | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.11 | ColumnaccPppLinkLocalToRemotePC | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.12 | ColumnaccPppLinkRemoteToLocalPC | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.13 | ColumnaccPppLinkLocalToRemoteAC | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.14 | ColumnaccPppLinkRemoteToLocalAC | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.15 | ColumnaccPppLinkTransmit32BitFcs | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.16 | ColumnaccPppLinkReceive32BitFcs | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.17 | ColumnaccPppLinkOperStatus | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.18 | ColumnaccPppLinkPacketTooShorts | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.19 | ColumnaccPppLinkUnknownProtocols | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.20 | ColumnaccPppLinkPacketInDiscards | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.1.1.21 | ColumnaccPppLinkPacketOutDiscards | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.2 | TableaccPppLcpConfigTable | not-accessible | mandatory | A table containing the LCP configuration parameters for this PPP Link. These variables represent the initial configuration of the PPP Link. The actual values o… |
| 1.3.6.1.4.1.5.1.1.32.2.1 | RowaccPppLcpConfigEntry | not-accessible | mandatory | Configuration information about a particular PPP Link. |
| 1.3.6.1.4.1.5.1.1.32.2.1.1 | ColumnaccPppLcpConfigIndex | read-only | mandatory | Interface number |
| 1.3.6.1.4.1.5.1.1.32.2.1.2 | ColumnaccPppLcpConfigInitialMRU | read-only | mandatory | The initial Maximum Receive Unit (MRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 0 then the local PPP ent… |
| 1.3.6.1.4.1.5.1.1.32.2.1.3 | ColumnaccPppLcpConfigReceiveACCMap | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.2.1.4 | ColumnaccPppLinkConfigXmitACCMap | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.2.1.5 | ColumnaccPppLcpConfigMagicNumber | read-only | mandatory | If true(2) then the local node will attempt to perform Magic Number negotiation with the remote node. If false(1) then this negotiation is not performed. In an… |
| 1.3.6.1.4.1.5.1.1.32.2.1.6 | ColumnaccPppLcpConfig32BitFCS | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.2.1.7 | ColumnaccPppLcpRestartTimer | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.2.1.8 | ColumnaccPppLcpMaxTerminate | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.2.1.9 | ColumnaccPppLcpMaxConfigure | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.2.1.10 | ColumnaccPppLcpMaxFailure | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.2.1.11 | ColumnaccPppLcpMonInterval | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.2.1.12 | ColumnaccPppLcpMonEvents | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.2.1.13 | ColumnaccPppLcpMonThreshold | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.2.1.14 | ColumnaccPppLcpAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.3 | TableaccPppLqrTable | not-accessible | mandatory | Table containing the LQR parameters and statistics for the local PPP entity. |
| 1.3.6.1.4.1.5.1.1.32.3.1 | RowaccPppLqrEntry | not-accessible | mandatory | LQR information for a particular PPP link. A PPP link will have an entry in this table if and only if LQR Quality Monitoring has been successfully negotiated f… |
| 1.3.6.1.4.1.5.1.1.32.3.1.1 | ColumnaccPppLqrIndex | read-only | mandatory | Interface number |
| 1.3.6.1.4.1.5.1.1.32.3.1.2 | ColumnaccPppLqrQuality | read-only | mandatory | The current quality of the link as declared by the local PPP entity's Link-Quality Management modules. No effort is made to define good or bad, nor the policy … |
| 1.3.6.1.4.1.5.1.1.32.3.1.3 | ColumnaccPppLqrInGoodOctets | read-only | mandatory | The LQR InGoodOctets counter for this link. |
| 1.3.6.1.4.1.5.1.1.32.3.1.4 | ColumnaccPppLqrLocalPeriod | read-only | mandatory | The LQR reporting period that is in effect for the local PPP entity. The local entity received a configure-ack for this value from the remote PPP entity. |
| 1.3.6.1.4.1.5.1.1.32.3.1.5 | ColumnaccPppLqrRemotePeriod | read-only | mandatory | The LQR reporting period that is in effect for the remote PPP entity. The local entity sent a configure-ack for this value in response to the configure-req fro… |
| 1.3.6.1.4.1.5.1.1.32.3.1.6 | ColumnaccPppLqrOutLQRs | read-only | mandatory | The value of the OutLQRs counter on the local node for the link identified by accPppLqrLinkIndex. |
| 1.3.6.1.4.1.5.1.1.32.3.1.7 | ColumnaccPppLqrInLQRs | read-only | mandatory | The value of the InLQRs counter on the local node for the link identified by accPppLqrLinkIndex. |
| 1.3.6.1.4.1.5.1.1.32.4 | TableaccPppLqrConfigTable | not-accessible | mandatory | Table containing the LQR Configuration parameters for the local PPP entity. |
| 1.3.6.1.4.1.5.1.1.32.4.1 | RowaccPppLqrConfigEntry | not-accessible | mandatory | LQR configuration information for a particular PPP link. |
| 1.3.6.1.4.1.5.1.1.32.4.1.1 | ColumnaccPppLqrConfigIndex | read-only | mandatory | Interface number |
| 1.3.6.1.4.1.5.1.1.32.4.1.2 | ColumnaccPppLqrConfigPeriod | read-write | mandatory | The LQR Reporting Period that the local PPP entity will attempt to negotiate with the remote entity, in units of seconds. Changing this object will have effect… |
| 1.3.6.1.4.1.5.1.1.32.4.1.3 | ColumnaccPppLqrConfigStatus | read-write | mandatory | If enabled(2) then the local node will attempt to perform LQR negotiation with the remote node. If disabled(1) then this negotiation is not performed. In any e… |
| 1.3.6.1.4.1.5.1.1.32.5 | TableaccPppIpcpTable | not-accessible | mandatory | Table containing the IPCP parameters and statistics for the local PPP entity. |
| 1.3.6.1.4.1.5.1.1.32.5.1 | RowaccPppIpcpEntry | not-accessible | mandatory | IPCP information for a particular PPP link. A PPP link will have an entry in this table if and only if running IP over the PPP link has been successfully negot… |
| 1.3.6.1.4.1.5.1.1.32.5.1.1 | ColumnaccPppIpcpIndex | read-only | mandatory | Interface number |
| 1.3.6.1.4.1.5.1.1.32.5.1.2 | ColumnaccPppIpcpLocalToRemoteCompressionProtocol | read-only | mandatory | The IP compression protocol that the local PPP-IP entity uses when sending packets to the remote PPP-IP entity. |
| 1.3.6.1.4.1.5.1.1.32.5.1.3 | ColumnaccPppIpcpRemoteToLocalCompressionProtocol | read-only | mandatory | The IP compression protocol that the remote PPP-IP entity uses when sending packets to the local PPP-IP entity. |
| 1.3.6.1.4.1.5.1.1.32.5.1.4 | ColumnaccPppIpcpRemoteMaxSlotId | read-only | mandatory | The Max-Slot-Id parameter that the remote node has advertised and that is in use on the link. |
| 1.3.6.1.4.1.5.1.1.32.5.1.5 | ColumnaccPppIpcpLocalMaxSlotId | read-only | mandatory | The Max-Slot-Id parameter that the local node has advertised and that is in use on the link. |
| 1.3.6.1.4.1.5.1.1.32.5.1.6 | ColumnaccPppIpOperStatus | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.6 | TableaccPppIpcpConfigTable | not-accessible | mandatory | Table containing the IPCP parameters and statistics for the local PPP entity. |
| 1.3.6.1.4.1.5.1.1.32.6.1 | RowaccPppIpcpConfigEntry | not-accessible | mandatory | IPCP information for a particular PPP link. A PPP link will have an entry in this table if and only if running IP over the PPP link has been successfully negot… |
| 1.3.6.1.4.1.5.1.1.32.6.1.1 | ColumnaccPppIpcpConfigIndex | read-only | mandatory | The value of ifIndex that identifies the entry in the ifTable that is associated with the local IPCP entity. |
| 1.3.6.1.4.1.5.1.1.32.6.1.2 | ColumnaccPppIpcpConfigCompression | read-write | mandatory | If none(1) then the local node will not attempt to negotiate any IP Compression option. Otherwise, the local node will attempt to negotiate compression mode in… |
| 1.3.6.1.4.1.5.1.1.32.6.1.3 | ColumnaccPppIpcpConfigStatus | read-write | mandatory | If enabled(2) then the local node will allow IP traffic to flow across the link. If disabled(1) then IP traffic will not be allowed to flow across the link. Se… |
| 1.3.6.1.4.1.5.1.1.32.7 | TableaccPppBncpTable | not-accessible | mandatory | Table containing the parameters and statistics for the local PPP entity that are related to the operation of Bridging over the PPP. |
| 1.3.6.1.4.1.5.1.1.32.7.1 | RowaccPppBncpEntry | not-accessible | mandatory | Bridging NCP information for a particular PPP link. A PPP link will have an entry in this table if and only if Bridging over PPP has been successfully negotiat… |
| 1.3.6.1.4.1.5.1.1.32.7.1.1 | ColumnaccPppBncpIndex | read-only | mandatory | Interface number |
| 1.3.6.1.4.1.5.1.1.32.7.1.2 | ColumnaccPppBncpLocalToRemoteTinygramCompression | read-only | mandatory | Indicates whether the local node will perform Tinygram Compression when sending packets to the remote entity. If false then the local entity will not perform T… |
| 1.3.6.1.4.1.5.1.1.32.7.1.3 | ColumnaccPppBncpRemoteToLocalTinygramCompression | read-only | mandatory | Indicates what the local node believes to be the remote node will perform Tinygram Compression when sending packets to the local node. If false then the remote… |
| 1.3.6.1.4.1.5.1.1.32.7.1.4 | ColumnaccPppBncpLocalToRemoteLanId | read-only | mandatory | Indicates whether the local node will include the LAN Identification field in transmitted packets or not. If false(1) then the local node will not transmit thi… |
| 1.3.6.1.4.1.5.1.1.32.7.1.5 | ColumnaccPppBncpRemoteToLocalLanId | read-only | mandatory | Indicates whether the remote node has indicated that it will include the LAN Identification field in transmitted packets or not. If false(1) then the field wil… |
| 1.3.6.1.4.1.5.1.1.32.8 | TableaccPppBncpConfigTable | not-accessible | mandatory | Table containing the parameters and statistics for the local PPP entity that are related to the operation of Bridging over the PPP. |
| 1.3.6.1.4.1.5.1.1.32.8.1 | RowaccPppBncpConfigEntry | not-accessible | mandatory | Bridging NCP information for a particular PPP link. A PPP link will have an entry in this table if and only if Bridging over PPP has been successfully negotiat… |
| 1.3.6.1.4.1.5.1.1.32.8.1.1 | ColumnaccPppBncpConfigIndex | read-only | mandatory | The value of ifIndex that identifies the entry in the interface table that is associated with the local PPP Bridging NCP entity. |
| 1.3.6.1.4.1.5.1.1.32.8.1.2 | ColumnaccPppBncpConfigTinygram | read-write | mandatory | If false then the local BNCP entity will not initiate the Tinygram Compression Option Negotiation. If true then the local BNCP entity will initiate negotiation… |
| 1.3.6.1.4.1.5.1.1.32.8.1.3 | ColumnaccPppBncpConfigRingId | read-write | mandatory | If false then the local PPP Entity will not initiate a Remote Ring Identification Option negotiation. If true then the local PPP entity will intiate this negot… |
| 1.3.6.1.4.1.5.1.1.32.8.1.4 | ColumnaccPppBncpConfigLineId | read-write | mandatory | If false then the local PPP Entity is not to initiate a Line Identification Option negotiation. If true then the local PPP entity will intiate this negotiation… |
| 1.3.6.1.4.1.5.1.1.32.8.1.5 | ColumnaccPppBncpConfigLanId | read-write | mandatory | If false then the local BNCP entity will not initiate the LAN Identification Option Negotiation. If true then the local BNCP entity will initiate negotiation o… |
| 1.3.6.1.4.1.5.1.1.32.8.1.6 | ColumnaccPppBncpConfigAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.9 | TableaccPppXnsTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.9.1 | RowaccPppXnsEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.9.1.1 | ColumnaccPppXnsIndex | read-only | mandatory | Same as ifIndex. |
| 1.3.6.1.4.1.5.1.1.32.9.1.2 | ColumnaccPppXnsOperStatus | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.10 | TableaccPppXnsConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.10.1 | RowaccPppXnsConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.10.1.1 | ColumnaccPppXnsConfigIndex | read-only | mandatory | Same as ifIndex. |
| 1.3.6.1.4.1.5.1.1.32.10.1.3 | ColumnaccPppXnsConfigAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.11 | TableaccPppIpxTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.11.1 | RowaccPppIpxEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.11.1.1 | ColumnaccPppIpxIndex | read-only | mandatory | Same as ifIndex. |
| 1.3.6.1.4.1.5.1.1.32.11.1.2 | ColumnaccPppIpxOperStatus | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.12 | TableaccPppIpxConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.12.1 | RowaccPppIpxConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.12.1.1 | ColumnaccPppIpxConfigIndex | read-only | mandatory | Same as ifIndex. |
| 1.3.6.1.4.1.5.1.1.32.12.1.3 | ColumnaccPppIpxConfigAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.13 | TableaccPppAppleTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.13.1 | RowaccPppAppleEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.13.1.1 | ColumnaccPppAppleIndex | read-only | mandatory | Same as ifIndex. |
| 1.3.6.1.4.1.5.1.1.32.13.1.2 | ColumnaccPppAppleOperStatus | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.14 | TableaccPppAppleConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.14.1 | RowaccPppAppleConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.14.1.1 | ColumnaccPppAppleConfigIndex | read-only | mandatory | Same as ifIndex. |
| 1.3.6.1.4.1.5.1.1.32.14.1.3 | ColumnaccPppAppleConfigAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.15 | TableaccPppDecTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.15.1 | RowaccPppDecEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.15.1.1 | ColumnaccPppDecIndex | read-only | mandatory | Same as ifIndex. |
| 1.3.6.1.4.1.5.1.1.32.15.1.2 | ColumnaccPppDecOperStatus | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.16 | TableaccPppDecConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.16.1 | RowaccPppDecConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.16.1.1 | ColumnaccPppDecConfigIndex | read-only | mandatory | Same as ifIndex. |
| 1.3.6.1.4.1.5.1.1.32.16.1.3 | ColumnaccPppDecConfigAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.17 | TableaccPppProtocolTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.17.1 | RowaccPppProtocolEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.17.1.1 | ColumnaccPppProtocolIndex | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.17.1.2 | ColumnaccPppProtocolProtocol | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.17.1.3 | ColumnaccPppProtocolAdminStatus | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.17.1.4 | ColumnaccPppProtocolOperStatus | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.32.18 | NodeaccPppMsg | |||
| 1.3.6.1.4.1.5.1.1.32.18.1 | ScalaraccPppMsgLevel | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.33 | NodeaccFlash | |||
| 1.3.6.1.4.1.5.1.1.33.1 | TableaccFlashTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.33.1.1 | RowaccFlashEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.33.1.1.1 | ColumnaccFlashIndex | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.33.1.1.2 | ColumnaccFlashFiDisp | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.33.1.1.3 | ColumnaccFlashCksum | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.33.1.1.4 | ColumnaccFlashLength | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.34 | NodeaccXBr | |||
| 1.3.6.1.4.1.5.1.1.34.1 | NodeaccXBridge | |||
| 1.3.6.1.4.1.5.1.1.34.1.1 | ScalaraccXBridgeStatus | read-write | mandatory | Status of translation bridging. |
| 1.3.6.1.4.1.5.1.1.34.1.2 | ScalaraccXBridgeRingId | read-write | mandatory | Translation bridging ring ID. |
| 1.3.6.1.4.1.5.1.1.35 | NodeaccExtProtImp | |||
| 1.3.6.1.4.1.5.1.1.35.1 | TableaccExtProtImpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.35.1.1 | RowaccExtProtImpEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.35.1.1.1 | ColumnaccExtProtImpProtocol | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.35.1.1.2 | ColumnaccExtProtImpAllowed | read-write | mandatory | |
| 1.3.6.1.4.1.5.1.1.36 | NodeaccIsdn | |||
| 1.3.6.1.4.1.5.1.1.36.1 | NodeaccIsdnDsl | |||
| 1.3.6.1.4.1.5.1.1.36.1.1 | ScalaraccIsdnDslIndex | read-only | deprecated | An index instantiating a particular digital subscriber loop interface on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.2 | TableaccIsdnSubTable | not-accessible | deprecated | ISDN subscriber table containing configuration and operational parameters for all ISDN subscriber interfaces on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.2.1 | RowaccIsdnSubEntry | not-accessible | deprecated | Configuration and operational parameters for a particular ISDN subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.2.1.1 | ColumnaccIsdnSubSwitchType | read-write | deprecated | The particular type of central-office switch providing access to the ISDN network and to which this subscriber interface is connected. |
| 1.3.6.1.4.1.5.1.1.36.2.1.2 | ColumnaccIsdnSubChannelMode | read-write | deprecated | The ISDN channel configuration mode. |
| 1.3.6.1.4.1.5.1.1.36.2.1.3 | ColumnaccIsdnSubAdminStatus | read-write | deprecated | The administrative status of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.2.1.4 | ColumnaccIsdnSubDiagLevel | read-write | deprecated | The current diagnostic message level for this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.2.1.5 | ColumnaccIsdnSubManualTei | read-write | deprecated | The TEI (terminal endpoint identifier) when manual TEI assignment is required. Setting this value between 0 and 63 (inclusive) specifies manual TEI assignment … |
| 1.3.6.1.4.1.5.1.1.36.3 | TableaccIsdnStatTable | not-accessible | deprecated | Statistics and operational status maintained for all ISDN subscriber interfaces on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.3.1 | RowaccIsdnStatEntry | not-accessible | deprecated | Statistics and operational status for a particular ISDN subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.1 | ColumnaccIsdnStatHdlcInPackets | read-only | deprecated | The number of packets received on the D-channel of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.2 | ColumnaccIsdnStatHdlcInOctets | read-only | deprecated | The number of octets received on the D-channel of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.3 | ColumnaccIsdnStatHdlcInErrors | read-only | deprecated | The number of input hardware errors counted by the D-channel input/output driver. |
| 1.3.6.1.4.1.5.1.1.36.3.1.4 | ColumnaccIsdnStatHdlcInDiscs | read-only | deprecated | The number of input packets discarded by the D-channel input/output driver. |
| 1.3.6.1.4.1.5.1.1.36.3.1.5 | ColumnaccIsdnStatHdlcOutPackets | read-only | deprecated | The number of packets transmitted on the D-channel of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.6 | ColumnaccIsdnStatHdlcOutOctets | read-only | deprecated | The number of octets transmitted on the D-channel of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.7 | ColumnaccIsdnStatHdlcOutErrors | read-only | deprecated | The number of output hardware errors counted by the D-channel input/output driver. |
| 1.3.6.1.4.1.5.1.1.36.3.1.8 | ColumnaccIsdnStatHdlcOutDiscs | read-only | deprecated | The number of output packets discarded by the D-channel input/output driver. |
| 1.3.6.1.4.1.5.1.1.36.3.1.9 | ColumnaccIsdnStatLapdUnsolicResps | read-only | deprecated | The number of unsolicited LAPD response frames received on all data links associated with the D-channel of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.10 | ColumnaccIsdnStatLapdPeerSabmes | read-only | deprecated | The number of peer SABME frames received on all data links associated with the D-channel of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.11 | ColumnaccIsdnStatLapdN200Errors | read-only | deprecated | The number of unsuccessful T200 timer recoveries after a frame has been retransmitted N200 times. |
| 1.3.6.1.4.1.5.1.1.36.3.1.12 | ColumnaccIsdnStatLapdNrSeqErrors | read-only | deprecated | The number of N(R) sequence errors. |
| 1.3.6.1.4.1.5.1.1.36.3.1.13 | ColumnaccIsdnStatLapdRecvdFrmrs | read-only | deprecated | The number of LAPD FRMR response frames received. |
| 1.3.6.1.4.1.5.1.1.36.3.1.14 | ColumnaccIsdnStatLapdCntlErrors | read-only | deprecated | The number of LAPD frames received with an invalid or non-implemented control field. |
| 1.3.6.1.4.1.5.1.1.36.3.1.15 | ColumnaccIsdnStatLapdInfoErrors | read-only | deprecated | The number of LAPD frames received with a non-permitted information (I) field. |
| 1.3.6.1.4.1.5.1.1.36.3.1.16 | ColumnaccIsdnStatLapdWrongSizes | read-only | deprecated | The number of LAPD frames received which were the wrong size. |
| 1.3.6.1.4.1.5.1.1.36.3.1.17 | ColumnaccIsdnStatLapdN201Errors | read-only | deprecated | The number of LAPD frames received which contained and information field which exceeded N201. |
| 1.3.6.1.4.1.5.1.1.36.3.1.18 | ColumnaccIsdnStatCallsOriginateds | read-only | deprecated | The number of outgoing calls originated on this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.19 | ColumnaccIsdnStatCallsOfferreds | read-only | deprecated | The number of incoming calls offerred on this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.20 | ColumnaccIsdnStatCallsAnswereds | read-only | deprecated | The number of outgoing calls originated on this subscriber interface which were answered by the destination. |
| 1.3.6.1.4.1.5.1.1.36.3.1.21 | ColumnaccIsdnStatCallsAccepteds | read-only | deprecated | The number of incoming calls offerred on this subscriber interface which were accepted for connection. |
| 1.3.6.1.4.1.5.1.1.36.3.1.22 | ColumnaccIsdnStatCallsCompleteds | read-only | deprecated | The number of outgoing and incoming calls completed (that is, the number of calls which were successfully connected). |
| 1.3.6.1.4.1.5.1.1.36.3.1.23 | ColumnaccIsdnStatCallsCleareds | read-only | deprecated | The number of outgoing and incoming calls cleared. |
| 1.3.6.1.4.1.5.1.1.36.3.1.24 | ColumnaccIsdnStatDslOperStatus | read-only | deprecated | The operation status of this interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.25 | ColumnaccIsdnStatLastCauses | read-only | deprecated | The last cause value sent or received on this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.4 | TableaccIsdnCallTable | not-accessible | deprecated | Parameters and operational status for ISDN calls active on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.4.1 | RowaccIsdnCallEntry | not-accessible | deprecated | Parameters and operational status for a particular ISDN call which is presently active or is in the process of being established or cleared. |
| 1.3.6.1.4.1.5.1.1.36.4.1.1 | ColumnaccIsdnCallIdentifier | read-only | deprecated | The internal call control identifier for this call. |
| 1.3.6.1.4.1.5.1.1.36.4.1.2 | ColumnaccIsdnCallReference | read-only | deprecated | The Q.931 call reference value for this call. |
| 1.3.6.1.4.1.5.1.1.36.4.1.3 | ColumnaccIsdnCallChannelId | read-only | deprecated | The bearer channel interface ID allocated for this call. |
| 1.3.6.1.4.1.5.1.1.36.4.1.4 | ColumnaccIsdnCallIfIndex | read-only | deprecated | The interface index of the physical port connected by the bearer channel. |
| 1.3.6.1.4.1.5.1.1.36.4.1.5 | ColumnaccIsdnCallInfoRate | read-only | deprecated | The information transfer rate. |
| 1.3.6.1.4.1.5.1.1.36.4.1.6 | ColumnaccIsdnCallState | read-only | deprecated | The current call control state (not Q.931). |
| 1.3.6.1.4.1.5.1.1.36.4.1.7 | ColumnaccIsdnCallCause | read-only | deprecated | The last cause value associated with this call. |
| 1.3.6.1.4.1.5.1.1.36.4.1.8 | ColumnaccIsdnCallOrigin | read-only | deprecated | The originator of the call. |
| 1.3.6.1.4.1.5.1.1.36.4.1.9 | ColumnaccIsdnCallAddress | read-only | deprecated | The remote call address associated with this call. For incoming calls, this is the calling ISDN address. For outgoing calls, this is the called ISDN address. |
| 1.3.6.1.4.1.5.1.1.36.4.1.10 | ColumnaccIsdnCallDslIndex | read-only | deprecated | The interface index for the digital subscriber loop. |
| 1.3.6.1.4.1.5.1.1.36.5 | NodeaccIsdnTest | |||
| 1.3.6.1.4.1.5.1.1.36.5.1 | ScalaraccIsdnTestIfIndex | read-write | mandatory | The interface index for the physical port from which a call will be made. |
| 1.3.6.1.4.1.5.1.1.36.5.2 | ScalaraccIsdnTestAddress | read-write | mandatory | The ISDN destination call address. |
| 1.3.6.1.4.1.5.1.1.36.5.3 | ScalaraccIsdnTestCommand | read-write | mandatory | The action to be performed. |
| 1.3.6.1.4.1.5.1.1.36.5.4 | ScalaraccIsdnTestProceed | read-only | mandatory | The action to be performed for incoming calls. |
| 1.3.6.1.4.1.5.1.1.36.5.5 | ScalaraccIsdnTestRegName | read-write | mandatory | The name of the MC145474 register to write. nr0(0), nr1(1), nr2(2), nr3(3), nr4(4), nr5(5), nr6(6), br0(16), br1(17), br2(18), br3(19), br4(20), br5(21), br6(2… |
| 1.3.6.1.4.1.5.1.1.36.5.6 | ScalaraccIsdnTestRegValue | read-write | mandatory | The value to write to the MC145474 register. |
| 1.3.6.1.4.1.5.1.1.36.6 | TableaccIsdnxSubTable | not-accessible | mandatory | ISDN subscriber table containing configuration and operational parameters for all ISDN subscriber interfaces on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.6.1 | RowaccIsdnxSubEntry | not-accessible | mandatory | An entry in the ISDN Subscriber Table |
| 1.3.6.1.4.1.5.1.1.36.6.1.1 | ColumnaccIsdnxSubDslIndex | read-only | mandatory | The ifIndex of an ISDN BRI, DBRI, PRI/T1 or PRI/E1 interface on this managed device. |
| 1.3.6.1.4.1.5.1.1.36.6.1.2 | ColumnaccIsdnxSubSwitchType | read-write | mandatory | The particular type of central-office switch providing access to the ISDN network and to which this subscriber interface is connected. |
| 1.3.6.1.4.1.5.1.1.36.6.1.3 | ColumnaccIsdnxSubChanConfig | read-write | mandatory | The ISDN channel configuration mode. Beginning with release 8.0, this is the number of bearer channels managed by the D channel. This object is normally read-o… |
| 1.3.6.1.4.1.5.1.1.36.6.1.4 | ColumnaccIsdnxSubAdminStatus | read-write | mandatory | The administrative status of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.6.1.5 | ColumnaccIsdnxSubDiagLevel | read-write | mandatory | The current diagnostic message level for this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.6.1.6 | ColumnaccIsdnxSubManualTei | read-write | mandatory | The TEI (terminal endpoint identifier) when manual TEI assignment is required. Setting this value between 0 and 63 (inclusive) specifies manual TEI assignment … |
| 1.3.6.1.4.1.5.1.1.36.6.1.7 | ColumnaccIsdnxSubOperStatus | read-write | mandatory | The operational status of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.6.1.8 | ColumnaccIsdnxSubNumNfas | read-only | mandatory | Indicates the number of NFAS trunks managed by this D channel. |
| 1.3.6.1.4.1.5.1.1.36.6.1.9 | ColumnaccIsdnxSubLastCause | read-only | mandatory | The last clearing cause for a call associated with this interface. |
| 1.3.6.1.4.1.5.1.1.36.7 | TableaccIsdnxStatTable | not-accessible | mandatory | Statistics and operational status maintained for all ISDN subscriber interfaces on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.7.1 | RowaccIsdnxStatEntry | not-accessible | mandatory | An entry in the ISDN Statistics Table. |
| 1.3.6.1.4.1.5.1.1.36.7.1.1 | ColumnaccIsdnxStatDslIndex | read-only | mandatory | The ifIndex of an ISDN BRI, DBRI, PRI/T1 or PRI/E1 interface on this managed device. |
| 1.3.6.1.4.1.5.1.1.36.7.1.2 | ColumnaccIsdnxStatHdlcInPackets | read-only | mandatory | The number of packets received on the D-channel of this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.3 | ColumnaccIsdnxStatHdlcInOctets | read-only | mandatory | The number of octets received on the D-channel of this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.4 | ColumnaccIsdnxStatHdlcInErrors | read-only | mandatory | The number of input hardware errors counted by the D-channel HDLC driver. |
| 1.3.6.1.4.1.5.1.1.36.7.1.5 | ColumnaccIsdnxStatHdlcInDiscards | read-only | mandatory | The number of input packets discarded by the D-channel HDLC driver. |
| 1.3.6.1.4.1.5.1.1.36.7.1.6 | ColumnaccIsdnxStatHdlcOutPackets | read-only | mandatory | The number of packets transmitted on the D-channel of this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.7 | ColumnaccIsdnxStatHdlcOutOctets | read-only | mandatory | The number of octets transmitted on the D-channel of this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.8 | ColumnaccIsdnxStatHdlcOutErrors | read-only | mandatory | The number of output hardware errors counted by the D-channel HDLC driver. |
| 1.3.6.1.4.1.5.1.1.36.7.1.9 | ColumnaccIsdnxStatHdlcOutDiscards | read-only | mandatory | The number of output packets discarded by the D-channel HDLC driver. |
| 1.3.6.1.4.1.5.1.1.36.7.1.10 | ColumnaccIsdnxStatLapdUnsolicResps | read-only | mandatory | The number of unsolicited LAPD response frames received on all data links associated with the D-channel of this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.11 | ColumnaccIsdnxStatLapdPeerSabmes | read-only | mandatory | The number of peer SABME frames received on all data links associated with the D-channel of this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.12 | ColumnaccIsdnxStatLapdN200Errors | read-only | mandatory | The number of unsuccessful T200 timer recoveries after a frame has been retransmitted N200 times. |
| 1.3.6.1.4.1.5.1.1.36.7.1.13 | ColumnaccIsdnxStatLapdNrSeqErrors | read-only | mandatory | The number of N(R) sequence errors. |
| 1.3.6.1.4.1.5.1.1.36.7.1.14 | ColumnaccIsdnxStatLapdRecvdFrmrs | read-only | mandatory | The number of LAPD FRMR response frames received. |
| 1.3.6.1.4.1.5.1.1.36.7.1.15 | ColumnaccIsdnxStatLapdCntlErrors | read-only | mandatory | The number of LAPD frames received with an invalid or non-implemented control field. |
| 1.3.6.1.4.1.5.1.1.36.7.1.16 | ColumnaccIsdnxStatLapdInfoErrors | read-only | mandatory | The number of LAPD frames received with a non-permitted information (I) field. |
| 1.3.6.1.4.1.5.1.1.36.7.1.17 | ColumnaccIsdnxStatLapdWrongSizes | read-only | mandatory | The number of LAPD frames received which were the wrong size. |
| 1.3.6.1.4.1.5.1.1.36.7.1.18 | ColumnaccIsdnxStatLapdN201Errors | read-only | mandatory | The number of LAPD frames received which contained and information field which exceeded N201. |
| 1.3.6.1.4.1.5.1.1.36.7.1.19 | ColumnaccIsdnxStatCallOriginateds | read-only | mandatory | The number of outgoing calls originated on this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.20 | ColumnaccIsdnxStatCallOfferreds | read-only | mandatory | The number of incoming calls offered on this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.21 | ColumnaccIsdnxStatCallRouteds | read-only | mandatory | The number of outgoing calls originated on this ISDN interface which were routed by the network. |
| 1.3.6.1.4.1.5.1.1.36.7.1.22 | ColumnaccIsdnxStatCallAccepteds | read-only | mandatory | The number of incoming calls offered on this ISDN interface which were accepted for connection. |
| 1.3.6.1.4.1.5.1.1.36.7.1.23 | ColumnaccIsdnxStatCallCompleteds | read-only | mandatory | The number of outgoing and incoming calls completed (that is, the number of calls which were successfully connected). |
| 1.3.6.1.4.1.5.1.1.36.7.1.24 | ColumnaccIsdnxStatCallCleareds | read-only | mandatory | The number of outgoing and incoming calls cleared. |
| 1.3.6.1.4.1.5.1.1.36.8 | TableaccIsdnxCallTable | not-accessible | mandatory | Parameters and operational status for ISDN calls in progress on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.8.1 | RowaccIsdnxCallEntry | not-accessible | mandatory | An entry in the ISDN Call Table. |
| 1.3.6.1.4.1.5.1.1.36.8.1.1 | ColumnaccIsdnxCallDslIndex | read-only | mandatory | The ifIndex of an ISDN BRI, DBRI, PRI/T1 or PRI/E1 interface on this managed device. |
| 1.3.6.1.4.1.5.1.1.36.8.1.2 | ColumnaccIsdnxCallReference | read-only | mandatory | The Q.931 call reference value for this call. |
| 1.3.6.1.4.1.5.1.1.36.8.1.3 | ColumnaccIsdnxCallOrigin | read-only | mandatory | The originator of the call. |
| 1.3.6.1.4.1.5.1.1.36.8.1.4 | ColumnaccIsdnxCallCircuitIndex | read-only | mandatory | The ifIndex for the circuit associated with this call. |
| 1.3.6.1.4.1.5.1.1.36.8.1.5 | ColumnaccIsdnxCallInfoRate | read-only | mandatory | The information transfer rate. |
| 1.3.6.1.4.1.5.1.1.36.8.1.6 | ColumnaccIsdnxCallState | read-only | mandatory | The Q.931 call control state. |
| 1.3.6.1.4.1.5.1.1.36.8.1.7 | ColumnaccIsdnxCallCause | read-only | mandatory | The last cause value associated with this call. |
| 1.3.6.1.4.1.5.1.1.36.8.1.8 | ColumnaccIsdnxCallAddress | read-only | mandatory | The remote call address associated with this call. For incoming calls, this is the calling ISDN address. For outgoing calls, this is the called ISDN address. |
| 1.3.6.1.4.1.5.1.1.36.8.1.9 | ColumnaccIsdnxCallInfoType | read-only | mandatory | The information transfer type: info-type-cmd circuit mode data, clear channel 64 kbits/s info-type-cm56 circuit mode data, rate-adapted to 56 kbits/s info-type… |
| 1.3.6.1.4.1.5.1.1.36.8.1.10 | ColumnaccIsdnxCallSlotMap | read-only | mandatory | A 31-bit mask which identifies the time-slots forming a hyperchannel. |
| 1.3.6.1.4.1.5.1.1.36.9 | TableaccIsdnSpidTable | not-accessible | mandatory | Valid SPIDs currently Registered with the CO, required for placing/accepting calls. |
| 1.3.6.1.4.1.5.1.1.36.9.1 | RowaccIsdnSpidEntry | not-accessible | mandatory | SPID information entry in the SPID Table. |
| 1.3.6.1.4.1.5.1.1.36.9.1.1 | ColumnaccIsdnSpidIndex | not-accessible | mandatory | An Index to Ports of B-channels. |
| 1.3.6.1.4.1.5.1.1.36.9.1.2 | ColumnaccIsdnSpidValue | read-write | mandatory | Value of SPID,Required for the terminal to be active on the S/T bus. |
| 1.3.6.1.4.1.5.1.1.37 | NodeaccV25 | |||
| 1.3.6.1.4.1.5.1.1.37.1 | TableaccV25StatTable | not-accessible | mandatory | A list of Physical Port Entries that are doing V25Bis Dialing. |
| 1.3.6.1.4.1.5.1.1.37.1.1 | RowaccV25StatEntry | not-accessible | mandatory | A table entry providing information about a specific port that is using V25Bis as the dialing procedure. |
| 1.3.6.1.4.1.5.1.1.37.1.1.1 | ColumnaccV25IntIndex | read-only | mandatory | This is the port which is currently doing the V25 Bis dialing. |
| 1.3.6.1.4.1.5.1.1.37.1.1.2 | ColumnaccV25CurState | read-only | mandatory | This is the current state of the state machine. |
| 1.3.6.1.4.1.5.1.1.37.1.1.3 | ColumnaccV25DTRSignal | read-only | mandatory | This is the current state of the 108/2 circuit. |
| 1.3.6.1.4.1.5.1.1.37.1.1.4 | ColumnaccV25DSRSignal | read-only | mandatory | This is the current state of the 107 circuit. |
| 1.3.6.1.4.1.5.1.1.37.1.1.5 | ColumnaccV25CTSSignal | read-only | mandatory | This is the current state of the 106 circuit. |
| 1.3.6.1.4.1.5.1.1.37.1.1.6 | ColumnaccV25CallAttempts | read-only | mandatory | The number of Call Attempts made for the current destination. |
| 1.3.6.1.4.1.5.1.1.37.1.1.7 | ColumnaccV25CallSuccess | read-only | mandatory | The number of Call Attempts which were successful for the current destination. |
| 1.3.6.1.4.1.5.1.1.39 | NodeaccEnetHub | |||
| 1.3.6.1.4.1.5.1.1.39.1 | TableaccEnetHubStatTable | not-accessible | mandatory | A List of Ethernet Hub Port statistics. |
| 1.3.6.1.4.1.5.1.1.39.1.1 | RowaccEnetHubStatEntry | not-accessible | mandatory | A table entry providing information about Ethernet Hub ports. |
| 1.3.6.1.4.1.5.1.1.39.1.1.1 | ColumnaccEnetPortIndex | read-only | mandatory | This is the Ethernet Physical Port starting with 1 |
| 1.3.6.1.4.1.5.1.1.39.1.1.2 | ColumnaccEnetHubIndex | read-only | mandatory | This is the Ethernet Hub Port index 1-8 |
| 1.3.6.1.4.1.5.1.1.39.1.1.3 | ColumnaccEnetHubAdStatus | read-write | mandatory | This is the current administrative status of the Ethernet Hub Port. |
| 1.3.6.1.4.1.5.1.1.39.1.1.4 | ColumnaccEnetHubOpStatus | read-only | mandatory | This shows the Operational State of the Ethernet Hub Port |
| 1.3.6.1.4.1.5.1.1.39.1.1.5 | ColumnaccEnetHubBitError | read-only | mandatory | This shows whether a bit-error has occurred |
| 1.3.6.1.4.1.5.1.1.39.1.1.6 | ColumnaccEnetHubLinkTest | read-only | mandatory | This shows whether a link test has occurred |
| 1.3.6.1.4.1.5.1.1.40 | NodeaccUnNumIP | |||
| 1.3.6.1.4.1.5.1.1.40.1 | TableaccIpNetSrcAddrTable | not-accessible | mandatory | Unnumbered IP Interface Table. |
| 1.3.6.1.4.1.5.1.1.40.1.1 | RowaccIpNetSrcAddrEntry | not-accessible | mandatory | An entry in the Unnumbered IP Interface Table. |
| 1.3.6.1.4.1.5.1.1.40.1.1.1 | ColumnaccIpNetSrcIfIndex | read-write | mandatory | The ifIndex of the unnumbered interface. |
| 1.3.6.1.4.1.5.1.1.40.1.1.2 | ColumnaccIpNetSrcAddress | read-write | mandatory | The IP Address this system will use as a source address on this unnumbered interface. By default, it is the smallest IP Address configured for the router. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BackupPort | INTEGER | ||
| DisplayString | OCTET STRING | ||
| PhysicalPort | INTEGER | ||
| SmdsAddress | OCTET STRING (SIZE (8)) |