ACC-NC-ALARM-MIB
24 objects
This MIB module defines MIB objects and notifications which are mapped from Andover Controls Continuum Alarms
Imported Objects
| ANDOVER-CONTROLS-MIB | accNetController |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus StorageType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10829.5.2.1 | IdentityaccAlarmMIB | This MIB module defines MIB objects and notifications which are mapped from Andover Controls Continuum Alarms | ||
| 1.3.6.1.4.1.10829.5.2.1.1 | ScalaralarmListMax | read-only | current | Maximum number of elements in the Alarm List table not including internal alarms, such as Controller Reset, Alarm Table Overflow. |
| 1.3.6.1.4.1.10829.5.2.1.2 | NodealarmList | |||
| 1.3.6.1.4.1.10829.5.2.1.2.2 | TablealarmTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.10829.5.2.1.2.2.1 | RowalarmEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.10829.5.2.1.2.2.1.1 | ColumnalarmControllerName | read-only | current | NetController name upon which this table exists. |
| 1.3.6.1.4.1.10829.5.2.1.2.2.1.2 | ColumnalarmInfinetControllerName | read-only | current | Infinet controller name upon which the point in alarm resides. This could also be null, if the point is on the NetController itself. |
| 1.3.6.1.4.1.10829.5.2.1.2.2.1.3 | ColumnalarmPointName | read-only | current | Continuum point name. |
| 1.3.6.1.4.1.10829.5.2.1.2.2.1.4 | ColumnalarmPointDescription | read-only | current | Continuum point description. |
| 1.3.6.1.4.1.10829.5.2.1.2.2.1.5 | ColumnalarmAlarmName | read-only | current | Continuum alarm name. |
| 1.3.6.1.4.1.10829.5.2.1.2.2.1.6 | ColumnalarmState | read-only | current | This is the state of the corresponding Continuum alarm as was learned from the last alarm transition. |
| 1.3.6.1.4.1.10829.5.2.1.2.2.1.7 | ColumnalarmAlmTime | read-only | current | Time stamp when point entered alarm (ALM) state. This could also be null, if no transition to ALM occured. |
| 1.3.6.1.4.1.10829.5.2.1.2.2.1.8 | ColumnalarmAlmValue | read-only | current | Value when point went into alarm (ALM) state. This could also be null, if no transition to ALM occured. |
| 1.3.6.1.4.1.10829.5.2.1.2.2.1.9 | ColumnalarmRtnTime | read-only | current | Time stamp when point returned to normal (RTN) state. This could also be null, if no transition to RTN occured. |
| 1.3.6.1.4.1.10829.5.2.1.2.2.1.10 | ColumnalarmRtnValue | read-only | current | Value when point state returned to normal (RTN). This could also be null, if no transition to RTN occured. |
| 1.3.6.1.4.1.10829.5.2.1.2.2.1.12 | ColumnalarmIENAD | read-only | current | IENAD that identifies point in IE table; 0 for internal alarm. |
| 1.3.6.1.4.1.10829.5.2.1.2.2.1.13 | ColumnalarmLink | read-only | current | Number identifying which Continuum alarm link 1-8; 1 for Controller Reset alarm; 2 for Alarm Table Overflow |
| 1.3.6.1.4.1.10829.5.2.1.3 | NotificationalarmTransitionEvent | current | This is the row of the alarm table that is sent as a notification to an SNMP manager. | |
| 1.3.6.1.4.1.10829.5.2.1.4 | NodealarmConformance | |||
| 1.3.6.1.4.1.10829.5.2.1.4.1 | NodealarmCompliances | |||
| 1.3.6.1.4.1.10829.5.2.1.4.1.1 | CompliancealarmBasicCompliance | current | Module Compliance for agent. Agent must support these groups. | |
| 1.3.6.1.4.1.10829.5.2.1.4.2 | NodealarmGroups | |||
| 1.3.6.1.4.1.10829.5.2.1.4.2.1 | GroupalarmGroup | current | Objects the agent must support. | |
| 1.3.6.1.4.1.10829.5.2.1.4.2.2 | GroupalarmEvents | current | Events the agent must support. |