ADSL2-LINE-TC-MIB
24 objects
This MIB Module provides Textual Conventions to be used by the ADSL2-LINE-MIB module for the purpose of managing ADSL, ADSL2, and ADSL2+ lines. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4706: see the RFC itself for full legal notices.
Imported Objects
| SNMPv2-SMI | MODULE-IDENTITY transmission |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.238.2 | Identityadsl2TCMIB | This MIB Module provides Textual Conventions to be used by the ADSL2-LINE-MIB module for the purpose of managing ADSL, ADSL2, and ADSL2+ lines. Copyright (C) T… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Adsl2ChAtmStatus | BITS { noDefect(0), noCellDelineation(1), lossOfCellDelineation(2) } | current | Attributes with this syntax are status parameters that reflect the failure status for Transmission Convergence (TC) layer of a given ATM interface (data path over an ADSL/ADSL2 or ADSL2+ link). This BITS structure can r… |
| Adsl2ChPtmStatus | BITS { noDefect(0), outOfSync(1) } | current | Attributes with this syntax are status parameters that reflect the failure status for a given PTM interface (packet data path over an ADSL/ADSL2 or ADSL2+ link). This BITS structure can report the following failures: no… |
| Adsl2ConfPmsForce | INTEGER { l3toL0(0), l0toL2(2), l0orL2toL3(3) } | current | Attributes with this syntax are configuration parameters that reference the desired power management state for the ADSL/ADSL2 or ADSL2+ link: l3toL0(0) - Perform a transition from L3 to L0 (Full power management state).… |
| Adsl2Direction | INTEGER { upstream(1), downstream(2) } | current | Identifies the direction of a band as being either upstream or downstream. Specified as an INTEGER, the two values are: upstream(1), and downstream(2). |
| Adsl2InitResult | INTEGER { noFail(0), configError(1), configNotFeasible(2), commFail(3), noPeerAtu(4), otherCause(5) } | current | Specifies the result of a full initialization attempt; the six possible result values are: noFail(0) - Successful initialization. configError(1) - Configuration failure. configNotFeasible(2) - Configuration details not … |
| Adsl2LastTransmittedState | INTEGER { atucG9941(0), atucQuiet1(1), atucComb1(2), atucQuiet2(3), atucComb2(4), atucIcomb1(5), atucLineprob(6), atucQuiet3(7), atucComb3(8), atucIComb2(9), atucMsgfmt(10), atucMsgpcb(11), atucQuiet4(12), atucReverb1(13), atucTref1(14), atucReverb2(15), atucEct(16), atucReverb3(17), atucTref2(18), atucReverb4(19), atucSegue1(20), atucMsg1(21), atucReverb5(22), atucSegue2(23), atucMedley(24), atucExchmarker(25), atucMsg2(26), atucReverb6(27), atucSegue3(28), atucParams(29), atucReverb7(30), atucSegue4(31), atucShowtime(32), aturG9941(100), aturQuiet1(101), aturComb1(102), aturQuiet2(103), aturComb2(104), aturIcomb1(105), aturLineprob(106), aturQuiet3(107), aturComb3(108), aturIcomb2(109), aturMsgfmt(110), aturMsgpcb(111), aturReverb1(112), aturQuiet4(113), aturReverb2(114), aturQuiet5(115), aturReverb3(116), aturEct(117), aturReverb4(118), aturSegue1(119), aturReverb5(120), aturSegue2(121), aturMsg1(122), aturMedley(123), aturExchmarker(124), aturMsg2(125), aturReverb6(126), aturSegue3(127), aturParams(128), aturReverb7(129), aturSegue4(130), aturShowtime(131) } | current | This parameter represents the last successfully transmitted initialization state in the last full initialization performed on the line. States are per the specific xDSL technology and are numbered from 0 (if G.994.1 is … |
| Adsl2LConfProfPmMode | BITS { allowTransitionsToIdle(0), allowTransitionsToLowPower(1) } | current | Attributes with this syntax are configuration parameters that reference the power modes/states into which the ATU-C or ATU-R may autonomously transit. It is a BITS structure that allows control of the following transit … |
| Adsl2LdsfResult | INTEGER { none(1), success(2), inProgress(3), unsupported(4), cannotRun(5), aborted(6), failed(7), illegalMode(8), adminUp(9), tableFull(10), noResources(11) } | current | Possible failure reasons associated with performing a Dual Ended Loop Test (DELT) on a DSL line. Possible values are: none(1) - The default value in case LDSF was never requested for the associated line. success(2) - Th… |
| Adsl2LineLdsf | INTEGER { inhibit(0), force(1) } | current | Attributes with this syntax are configuration parameters that control the Loop Diagnostic mode for the ADSL/ADSL2 or ADSL2+ link. The possible values are: inhibit(0) - Inhibit Loop Diagnostic mode. force(1) - Force/Init… |
| Adsl2LineStatus | BITS { noDefect(0), lossOfFrame(1), lossOfSignal(2), lossOfPower(3), initFailure(4) } | current | Attributes with this syntax are status parameters that reflect the failure status for a given endpoint of ADSL/ADSL2 or ADSL2+ link. This BITS structure can report the following failures: noDefect(0) - This bit position… |
| Adsl2MaxBer | INTEGER { eminus3(1), eminus5(2), eminus7(3) } | current | Attributes with this syntax are configuration parameters that reference the maximum Bit Error Rate (BER). The possible values are: eminus3(1) - Maximum BER=E^-3 eminus5(2) - Maximum BER=E^-5 eminus7(3) - Maximum BER=E^-7 |
| Adsl2OperationModes | INTEGER { defMode(1), adsl(2), g9923PotsNonOverlapped(8), g9923PotsOverlapped(9), g9923IsdnNonOverlapped(10), g9923isdnOverlapped(11), g9924potsNonOverlapped(14), g9924potsOverlapped(15), g9923AnnexIAllDigNonOverlapped(18), g9923AnnexIAllDigOverlapped(19), g9923AnnexJAllDigNonOverlapped(20), g9923AnnexJAllDigOverlapped(21), g9924AnnexIAllDigNonOverlapped(22), g9924AnnexIAllDigOverlapped(23), g9923AnnexLMode1NonOverlapped(24), g9923AnnexLMode2NonOverlapped(25), g9923AnnexLMode3Overlapped(26), g9923AnnexLMode4Overlapped(27), g9923AnnexMPotsNonOverlapped(28), g9923AnnexMPotsOverlapped(29), g9925PotsNonOverlapped(30), g9925PotsOverlapped(31), g9925IsdnNonOverlapped(32), g9925isdnOverlapped(33), g9925AnnexIAllDigNonOverlapped(36), g9925AnnexIAllDigOverlapped(37), g9925AnnexJAllDigNonOverlapped(38), g9925AnnexJAllDigOverlapped(39), g9925AnnexMPotsNonOverlapped(40), g9925AnnexMPotsOverlapped(41) } | current | The ADSL2 management model specified includes an ADSL Mode attribute that identifies an instance of ADSL Mode-Specific PSD Configuration object in the ADSL Line Profile. The following classes of ADSL operating mode are … |
| Adsl2PowerMngState | INTEGER { l0(1), l1(2), l2(3), l3(4) } | current | Attributes with this syntax uniquely identify each power management state defined for the ADSL/ADSL2 or ADSL2+ link. The possible values are: l0(1) - L0 - Full power management state. l1(2) - L1 - Low power management s… |
| Adsl2PsdMaskDs | OCTET STRING (SIZE (0..96)) | current | This is a structure that represents up to 32 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The third octet holds the PSD … |
| Adsl2PsdMaskUs | OCTET STRING (SIZE (0..12)) | current | This is a structure that represents up to 4 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The third octet holds the PSD r… |
| Adsl2RaMode | INTEGER { manual(1), raInit(2), dynamicRa(3) } | current | Specifies the rate adaptation behavior for the line. The three possible behaviors are: manual(1) - No Rate-Adaptation. The initialization process attempts to synchronize to a specified rate. raInit(2) - Rate-Adaptation … |
| Adsl2RfiDs | OCTET STRING (SIZE (0..64)) | current | Each one of the 512 bits in this OCTET STRING array represents the corresponding bin in the downstream direction. A value of one indicates that the bin is part of a notch filter. |
| Adsl2ScMaskDs | OCTET STRING (SIZE (0..64)) | current | Each one of the 512 bits in this OCTET STRING array represents the corresponding bin in the downstream direction. A value of one indicates that the bin is not in use. |
| Adsl2ScMaskUs | OCTET STRING (SIZE (0..8)) | current | Each one of the 64 bits in this OCTET STRING array represents the corresponding bin in the upstream direction. A value of one indicates that the bin is not in use. |
| Adsl2SymbolProtection | INTEGER { noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), sixSymbols(8), sevenSymbols(9), eightSymbols(10), nineSymbols(11), tenSymbols(12), elevenSymbols(13), twelveSymbols(14), thirteeSymbols(15), fourteenSymbols(16), fifteenSymbols(17), sixteenSymbols(18) } | current | Attributes with this syntax are configuration parameters that reference the minimum-length impulse noise protection (INP) in terms of number of symbols. The possible values are: noProtection (i.e., INP not required), ha… |
| Adsl2TransmissionModeType | BITS { ansit1413(0), etsi(1), g9921PotsNonOverlapped(2), g9921PotsOverlapped(3), g9921IsdnNonOverlapped(4), g9921isdnOverlapped(5), g9921tcmIsdnNonOverlapped(6), g9921tcmIsdnOverlapped(7), g9922potsNonOverlapped(8), g9922potsOverlapped(9), g9922tcmIsdnNonOverlapped(10), g9922tcmIsdnOverlapped(11), g9921tcmIsdnSymmetric(12), reserved1(13), reserved2(14), reserved3(15), reserved4(16), reserved5(17), g9923PotsNonOverlapped(18), g9923PotsOverlapped(19), g9923IsdnNonOverlapped(20), g9923isdnOverlapped(21), reserved6(22), reserved7(23), g9924potsNonOverlapped(24), g9924potsOverlapped(25), reserved8(26), reserved9(27), g9923AnnexIAllDigNonOverlapped(28), g9923AnnexIAllDigOverlapped(29), g9923AnnexJAllDigNonOverlapped(30), g9923AnnexJAllDigOverlapped(31), g9924AnnexIAllDigNonOverlapped(32), g9924AnnexIAllDigOverlapped(33), g9923AnnexLMode1NonOverlapped(34), g9923AnnexLMode2NonOverlapped(35), g9923AnnexLMode3Overlapped(36), g9923AnnexLMode4Overlapped(37), g9923AnnexMPotsNonOverlapped(38), g9923AnnexMPotsOverlapped(39), g9925PotsNonOverlapped(40), g9925PotsOverlapped(41), g9925IsdnNonOverlapped(42), g9925isdnOverlapped(43), reserved10(44), reserved11(45), g9925AnnexIAllDigNonOverlapped(46), g9925AnnexIAllDigOverlapped(47), g9925AnnexJAllDigNonOverlapped(48), g9925AnnexJAllDigOverlapped(49), g9925AnnexMPotsNonOverlapped(50), g9925AnnexMPotsOverlapped(51), reserved12(52), reserved13(53), reserved14(54), reserved15(55) } | current | A set of ADSL2 line transmission modes, with one bit per mode. The notes (F) and (L) denote Full-Rate and Lite/splitterless, respectively: Bit 00 : Regional Std. (ANSI T1.413) (F) Bit 01 : Regional Std. (ETSI DTS/TM0600… |
| Adsl2Tssi | OCTET STRING (SIZE (0..96)) | current | This is a structure that represents up to 32 transmit spectrum shaping (TSSi) breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The th… |
| Adsl2Unit | INTEGER { atuc(1), atur(2) } | current |