ADTRAN-ADUNIT-MIB
171 objects
The MIB module for general unit configuration.
Imported Objects
| ADTRAN-MIB | adShared |
| ADTRAN-TC | AdPresence AdProductIdentifier |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString PhysAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.30 | IdentityadtranUnitMib | The MIB module for general unit configuration. | ||
| 1.3.6.1.4.1.664.5.30.1 | NodeadUnitInfo | |||
| 1.3.6.1.4.1.664.5.30.1.1 | ScalaradUnitBootRevision | read-only | current | Unit boot PROM revision. |
| 1.3.6.1.4.1.664.5.30.2 | NodeadUnitConfig | |||
| 1.3.6.1.4.1.664.5.30.2.1 | NodeadUnitGenCfg | |||
| 1.3.6.1.4.1.664.5.30.2.1.1 | ScalaradUnitDateTime | read-write | current | The current unit date and time. |
| 1.3.6.1.4.1.664.5.30.2.1.2 | ScalaradUnitMaxTelnetAccess | read-write | current | The maximum number of active telnet sessions. |
| 1.3.6.1.4.1.664.5.30.2.1.3 | ScalaradUnitEncryptPasswords | read-write | current | Determines whether or not the locally stored user passwords are encrypted. |
| 1.3.6.1.4.1.664.5.30.2.1.4 | ScalaradUnitEventLogging | read-write | current | Enable/Disable event logging on the unit. |
| 1.3.6.1.4.1.664.5.30.2.1.5 | ScalaradUnitClearEventLog | read-write | current | Set to 1 to clear all entries from unit's local event log. |
| 1.3.6.1.4.1.664.5.30.2.2 | NodeadUserCfg | |||
| 1.3.6.1.4.1.664.5.30.2.2.1 | TableadUnitUserTable | not-accessible | current | A list of users who are allowed access to the unit. |
| 1.3.6.1.4.1.664.5.30.2.2.1.1 | RowadUnitUserEntry | not-accessible | current | Each entry in the list defines the user/pass, authen method, access level, and timeout. |
| 1.3.6.1.4.1.664.5.30.2.2.1.1.1 | ColumnadUnitUserIndex | not-accessible | current | Sequential index of the list of defined users. |
| 1.3.6.1.4.1.664.5.30.2.2.1.1.2 | ColumnadUnitUserName | read-create | current | The user name for access. |
| 1.3.6.1.4.1.664.5.30.2.2.1.1.3 | ColumnadUnitUserAuthenMethod | read-create | current | The type of authentication to perform for this user. |
| 1.3.6.1.4.1.664.5.30.2.2.1.1.4 | ColumnadUnitUserPasswd | read-create | current | The user password |
| 1.3.6.1.4.1.664.5.30.2.2.1.1.5 | ColumnadUnitUserIdleTime | read-create | current | The idle timeout value in minutes for a connection. If no operator activity is detected for this interval the connection is terminated. If the value is set to … |
| 1.3.6.1.4.1.664.5.30.2.2.1.1.6 | ColumnadUnitUserLevel | read-create | current | This is the level of access this user has. |
| 1.3.6.1.4.1.664.5.30.2.2.1.1.7 | ColumnadUnitUserIpAddr | read-create | current | If not null, the only IP address (or hostname) from which the specified user may initiate a telnet access. |
| 1.3.6.1.4.1.664.5.30.2.2.1.1.8 | ColumnadUnitUserState | read-only | current | Indication of whether or not the user has an active session. |
| 1.3.6.1.4.1.664.5.30.2.2.1.1.9 | ColumnadUnitUserStatus | read-create | current | The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the ad… |
| 1.3.6.1.4.1.664.5.30.2.3 | NodeadSnmpCfg | |||
| 1.3.6.1.4.1.664.5.30.2.3.1 | TableadUnitSNMPCommunitiesTable | not-accessible | current | Contains a list of users who have SNMP access to this unit. |
| 1.3.6.1.4.1.664.5.30.2.3.1.1 | RowadUnitSNMPCommunitiesEntry | not-accessible | current | Each entry in the list defines the community string, access privilege, and Manager IP address. |
| 1.3.6.1.4.1.664.5.30.2.3.1.1.1 | ColumnadUnitSNMPCommunitiesIndex | not-accessible | current | Index of the table. |
| 1.3.6.1.4.1.664.5.30.2.3.1.1.2 | ColumnadUnitSNMPCommunitiesString | read-create | current | The community string which has the specified SNMP access. |
| 1.3.6.1.4.1.664.5.30.2.3.1.1.3 | ColumnadUnitSNMPCommunitiesPrivilege | read-create | current | Set the SNMP privileges of this user. |
| 1.3.6.1.4.1.664.5.30.2.3.1.1.4 | ColumnadUnitSNMPCommunitiesMngmtIP | read-create | current | The IP address of the manager station. Set to '0.0.0.0' to enable the string for all addresses. |
| 1.3.6.1.4.1.664.5.30.2.3.1.1.5 | ColumnadUnitSNMPCommunitiesStatus | read-create | current | The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the ad… |
| 1.3.6.1.4.1.664.5.30.2.3.2 | TableadUnitSNMPTrapsTable | not-accessible | current | Contains a list of users that will receive SNMP traps from this unit. |
| 1.3.6.1.4.1.664.5.30.2.3.2.1 | RowadUnitSNMPTrapsEntry | not-accessible | current | Each entry in the list defines the name, privilege, and Manager IP address. |
| 1.3.6.1.4.1.664.5.30.2.3.2.1.1 | ColumnadUnitSNMPTrapsIndex | not-accessible | current | Index of the table. |
| 1.3.6.1.4.1.664.5.30.2.3.2.1.2 | ColumnadUnitSNMPTrapsString | read-create | current | The community string included in the SNMP traps. |
| 1.3.6.1.4.1.664.5.30.2.3.2.1.3 | ColumnadUnitSNMPTrapsMngmtAddr | read-create | current | The hostname (or IP address) that will receive SNMP traps. |
| 1.3.6.1.4.1.664.5.30.2.3.2.1.4 | ColumnadUnitSNMPTrapsStatus | read-create | current | The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the ad… |
| 1.3.6.1.4.1.664.5.30.2.3.3 | ScalaradUnitSNMPEnableTraps | read-write | current | Enables or disables the transmission of all Traps. |
| 1.3.6.1.4.1.664.5.30.2.3.4 | ScalaradUnitSNMPAuthenticationTraps | read-write | current | Enables or disables the transmission of Authentication Traps. |
| 1.3.6.1.4.1.664.5.30.2.4 | NodeadConsoleCfg | |||
| 1.3.6.1.4.1.664.5.30.2.4.1 | ScalaradConsoleAccessMode | read-write | current | Specify operational mode of console. 0: No Authentication; no login required, CLI active automatically 1: Password Only 2: Username and password required |
| 1.3.6.1.4.1.664.5.30.2.4.2 | ScalaradConsolePasswd | read-write | current | The password for the console. |
| 1.3.6.1.4.1.664.5.30.2.4.3 | ScalaradConsoleLoginTimeout | read-write | current | Specifies the amount of time the system will wait for user input for a username &/or password before timing out and resetting back to intial prompt state. The … |
| 1.3.6.1.4.1.664.5.30.2.4.4 | ScalaradConsoleBaudRate | read-write | current | The baud rate for the console port. |
| 1.3.6.1.4.1.664.5.30.2.4.5 | ScalaradConsoleDataBits | read-write | current | The data bits for the console port. |
| 1.3.6.1.4.1.664.5.30.2.4.6 | ScalaradConsoleParity | read-write | current | The parity scheme for the console port. |
| 1.3.6.1.4.1.664.5.30.2.4.7 | ScalaradConsoleStopBits | read-write | current | The number of stop bits for the console port. |
| 1.3.6.1.4.1.664.5.30.2.4.8 | ScalaradConsoleFlowControl | read-write | current | The flow control mechanism for the console port. hardware control is via RTS/CTS and xOn/xOff is via transmission of the characters Control-S and Control-Q. Un… |
| 1.3.6.1.4.1.664.5.30.2.4.9 | ScalaradConsoleModemInitString | read-write | current | Initialization string to send to connected modem. |
| 1.3.6.1.4.1.664.5.30.2.4.10 | ScalaradConsoleInitModem | read-write | current | Set value to 1 to force unit to attempt to initialize a connected modem on the console port by sending the contents of adConsoleModemInitString. |
| 1.3.6.1.4.1.664.5.30.2.5 | NodeadUnitSyslogCfg | |||
| 1.3.6.1.4.1.664.5.30.2.5.1 | ScalaradUnitSyslogTransmission | read-write | current | Enables or disables the transmission of log events to the external Syslog server. |
| 1.3.6.1.4.1.664.5.30.2.5.2 | ScalaradUnitSyslogSrvrName | read-write | current | The Host IP Address specifies the hostname or IP address of the external server that is running the Syslog host daemon. |
| 1.3.6.1.4.1.664.5.30.2.5.3 | ScalaradUnitSyslogHostFacility | read-write | current | The Host Facility specifies the facility destination of log events. Facilities are located on the host and are managed by the Syslog host daemon running on eit… |
| 1.3.6.1.4.1.664.5.30.2.5.4 | ScalaradUnitSyslogMinSeverity | read-write | current | MinSeverity Level specifies the minimum level of severity that will cause messages to be logged to the Syslog server. The levels are listed in order of decreas… |
| 1.3.6.1.4.1.664.5.30.3 | NodeadUnitUtil | |||
| 1.3.6.1.4.1.664.5.30.3.1 | NodeadUnitGenUtil | |||
| 1.3.6.1.4.1.664.5.30.3.1.1 | ScalaradUnitRebootSystem | read-write | current | Set to 1 to initiate system reboot. |
| 1.3.6.1.4.1.664.5.30.3.1.2 | ScalaradUnitFactoryDefaultSystem | read-write | current | Set to 1 to set factory defaults configuration values for the entire unit. |
| 1.3.6.1.4.1.664.5.30.3.1.3 | ScalaradUnitSchedResetTime | read-write | current | Date and Time of scheduled system reset. |
| 1.3.6.1.4.1.664.5.30.3.2 | NodeadUpdtFirmware | |||
| 1.3.6.1.4.1.664.5.30.3.2.1 | ScalaradUpdtFwXfrMethod | read-write | current | Method of downloading firmware to the unit. |
| 1.3.6.1.4.1.664.5.30.3.2.2 | ScalaradUpdtFwTFTPSrvAddr | read-write | current | The hostname or IP address of the TFTP server. |
| 1.3.6.1.4.1.664.5.30.3.2.3 | ScalaradUpdtFwTFTPSrvFileName | read-write | current | The TFTP Server filename. |
| 1.3.6.1.4.1.664.5.30.3.2.4 | ScalaradUpdtFwXfrStatus | read-only | current | Status of the current transfer. |
| 1.3.6.1.4.1.664.5.30.3.2.5 | ScalaradUpdtFwXfrModule | read-write | current | The module (slot) to update with the Firmware transfer. |
| 1.3.6.1.4.1.664.5.30.3.2.6 | ScalaradUpdtFwXfrControl | read-write | current | Start the current firmware transfer by setting value to 1 and stop a transfer in progress by setting value to 0. |
| 1.3.6.1.4.1.664.5.30.3.3 | NodeadXferConfig | |||
| 1.3.6.1.4.1.664.5.30.3.3.1 | ScalaradUnitXferConfigMethod | read-write | current | Method to download/upload the unit's configuration. |
| 1.3.6.1.4.1.664.5.30.3.3.2 | ScalaradUnitXferConfigType | read-write | current | Format of the configuration file. |
| 1.3.6.1.4.1.664.5.30.3.3.3 | ScalaradUnitConfigTFTPSrvAddr | read-write | current | Hostname or IP address of the TFTP server. |
| 1.3.6.1.4.1.664.5.30.3.3.4 | ScalaradUnitConfigTFTPSrvFileName | read-write | current | The filename to download/upload from the TFTP server. |
| 1.3.6.1.4.1.664.5.30.3.3.5 | ScalaradUnitConfigCurrXfrStatus | read-only | current | The status of the current configuration file transfer. |
| 1.3.6.1.4.1.664.5.30.3.3.6 | ScalaradUnitConfigPrevXfrStatus | read-only | current | The status of the previous the configuration file transfer. |
| 1.3.6.1.4.1.664.5.30.3.3.7 | ScalaradUpdtConfigXfrModule | read-write | current | If 0 through 35 is selected, the source or destination module (slot) for the configuration transfer. If -1 is selected the entire configuration is transfered. |
| 1.3.6.1.4.1.664.5.30.3.3.8 | ScalaradUnitXferConfig | read-write | current | Set value to 1 to transfer the configuration file from the tftp server and switch to the configuration. Set value to 2 to transfer the configuration file to th… |
| 1.3.6.1.4.1.664.5.30.3.4 | NodeadUnitCpuUtil | |||
| 1.3.6.1.4.1.664.5.30.3.4.1 | ScalaradUnitCurrentCpuUtil | read-only | current | Average CPU utilization over the last second. |
| 1.3.6.1.4.1.664.5.30.3.4.2 | ScalaradUnitTotalCpuUtil | read-only | current | Average CPU utilization since last system reboot or statistics reset. |
| 1.3.6.1.4.1.664.5.30.3.4.3 | ScalaradUnitClearUtilizationStats | read-write | current | Set value to 1 to clear CPU utilization statistics. |
| 1.3.6.1.4.1.664.5.30.3.5 | NodeadUnitPing | |||
| 1.3.6.1.4.1.664.5.30.3.5.1 | ScalaradUnitPingStatus | read-write | current | Set value to 1 to Stop ping sequence and 2 to start ping sequence. |
| 1.3.6.1.4.1.664.5.30.3.5.2 | ScalaradUnitPingMode | read-write | current | Set the 'sweep' BIT to cause the ping process to send consecutively increasing buffer sizes starting at adUnitPingPktMinSize and continueing to adUnitPingPktMa… |
| 1.3.6.1.4.1.664.5.30.3.5.3 | ScalaradUnitPingTarget | read-write | current | Host name or IP Address of the unit to ping. |
| 1.3.6.1.4.1.664.5.30.3.5.4 | ScalaradUnitPingPktMinSize | read-write | current | If in normal mode specifies the size of the ping request buffer. In Sweep mode the mininum initial size. |
| 1.3.6.1.4.1.664.5.30.3.5.5 | ScalaradUnitPingPktMaxSize | read-write | current | Not used in normal mode. In Sweep mode, the maximum buffer size used for the sweep. If the value is not greater than adUnitPingPktMinSize the sweep will termin… |
| 1.3.6.1.4.1.664.5.30.3.5.6 | ScalaradUnitPingFillBuffer | read-write | current | Specify the characters to replicate within the outgoing request buffer. |
| 1.3.6.1.4.1.664.5.30.3.5.7 | ScalaradUnitPingSource | read-write | current | The IP Address to be inserted into source field of transmitted message. If set to the default of 0.0.0.0, the address of the source network interface ( determi… |
| 1.3.6.1.4.1.664.5.30.3.5.8 | ScalaradUnitPingTimeout | read-write | current | Specify the Timeout for each ping request, specified in seconds. |
| 1.3.6.1.4.1.664.5.30.3.5.9 | ScalaradUnitPingRepeatCnt | read-write | current | Specify the number of times to repeat the ping request. For verbose mode maximum allowed is 50, for normal mode, the maximum is 255. |
| 1.3.6.1.4.1.664.5.30.3.5.10 | ScalaradUnitPingXmtNum | read-only | current | The actual number of ping requests transmitted. |
| 1.3.6.1.4.1.664.5.30.3.5.11 | ScalaradUnitPingRcvNum | read-only | current | The number of respsones received |
| 1.3.6.1.4.1.664.5.30.3.5.12 | ScalaradUnitPingResult | read-write | current | Output string to show results of ping when in normal mode. If more than 255 transmissions are generated during the ping execution only the results of the first… |
| 1.3.6.1.4.1.664.5.30.3.5.13 | ScalaradUnitPingMinRndTrp | read-only | current | The minimum round-trip time in milliseconds. |
| 1.3.6.1.4.1.664.5.30.3.5.14 | ScalaradUnitPingMaxRndTrp | read-only | current | The maximum round-trip time in milliseconds. |
| 1.3.6.1.4.1.664.5.30.3.5.15 | ScalaradUnitPingAvgRndTrp | read-only | current | The average round-trip time in milliseconds. |
| 1.3.6.1.4.1.664.5.30.3.5.16 | TableadUnitPingVerboseTable | not-accessible | current | A table reporting the verbose output of the last ping test initiated via SNMP. |
| 1.3.6.1.4.1.664.5.30.3.5.16.1 | RowadUnitPingVerboseEntry | not-accessible | current | Each entry in the list is the result of a single ping request. Each request is identified by its sequence number, adPingRespIndex. |
| 1.3.6.1.4.1.664.5.30.3.5.16.1.1 | ColumnadPingRespIndex | not-accessible | current | The ping response sequence number. |
| 1.3.6.1.4.1.664.5.30.3.5.16.1.2 | ColumnadPingRespStatus | read-only | current | The compeletion status of the ping response: 1 - OK 2 - Target address is unknown 3 - Invalid Source address 4 - No response received before timeout expired 5 … |
| 1.3.6.1.4.1.664.5.30.3.5.16.1.3 | ColumnadPingRespAddr | read-only | current | The reply from address. |
| 1.3.6.1.4.1.664.5.30.3.5.16.1.4 | ColumnadPingRespSize | read-only | current | Buffer Size of the response. |
| 1.3.6.1.4.1.664.5.30.3.5.16.1.5 | ColumnadPingRespTime | read-only | current | Time in milliseconds to receive response. |
| 1.3.6.1.4.1.664.5.30.3.5.16.1.6 | ColumnadPingRespTTL | read-only | current | TTL value of the response. For TTL to be reported, the buffer size of the request (adUnitPingPktSize) must be at least 4 bytes. |
| 1.3.6.1.4.1.664.5.30.3.6 | NodeadUnitTraceRt | |||
| 1.3.6.1.4.1.664.5.30.3.6.1 | ScalaradUnitTraceRtStatus | read-write | current | Set value to 0 to interrupt and stop a TraceRoute sequence and 1 to start a TraceRoute sequence. When TraceRoute completes value with change from 'active' to '… |
| 1.3.6.1.4.1.664.5.30.3.6.2 | ScalaradUnitTraceRtTarget | read-write | current | Host name or IP Address of the unit to probe. |
| 1.3.6.1.4.1.664.5.30.3.6.3 | ScalaradUnitTraceRtSource | read-write | current | The IP Address to be inserted into source field of transmitted message. If set to the default of 0.0.0.0, the unit address is used. |
| 1.3.6.1.4.1.664.5.30.3.6.4 | ScalaradUnitTraceRtTimeout | read-write | current | The response timeout for all traceroute probes. |
| 1.3.6.1.4.1.664.5.30.3.6.5 | ScalaradUnitTraceRtProbeCnt | read-write | current | The number of probes to initiate for each TTL. |
| 1.3.6.1.4.1.664.5.30.3.6.6 | ScalaradUnitTraceRtMinTTL | read-write | current | The Minimum Time To Live value (hops) of the traceroute probes. |
| 1.3.6.1.4.1.664.5.30.3.6.7 | ScalaradUnitTraceRtMaxTTL | read-write | current | Specify the Maximum Time To Live value (hops) of the traceroute probes. |
| 1.3.6.1.4.1.664.5.30.3.6.8 | ScalaradUnitTraceRtPortNum | read-write | current | Set the base UDP port number used in probes. Traceroute operation is based on the fact that nothing is listening on UDP ports base to base + nhops - 1 at the d… |
| 1.3.6.1.4.1.664.5.30.3.6.9 | TableadUnitTraceRtRespTable | not-accessible | current | A table reporting the output of each traceroute probe initiated via SNMP. Upon initiation of a traceroute any existing entries in the table are automatically d… |
| 1.3.6.1.4.1.664.5.30.3.6.9.1 | RowadUnitTraceRtRespEntry | not-accessible | current | Each entry in the list is the result of a single probe request intiated by traceroute. Each request is identified by its TTL number, adTraceRtRespIndex. When a… |
| 1.3.6.1.4.1.664.5.30.3.6.9.1.1 | ColumnadTraceRtRespIndex | not-accessible | current | The traceroute response sequence number (TTL). |
| 1.3.6.1.4.1.664.5.30.3.6.9.1.2 | ColumnadTraceRtRespString | read-only | current | The response output from the traceroute process for each probe. |
| 1.3.6.1.4.1.664.5.30.4 | NodeadUnitStatus | |||
| 1.3.6.1.4.1.664.5.30.4.1 | ScalaradUnitFaceplate | read-only | current | A bit encoded string representing the status of all faceplate indicators, LEDs, & switches for GUI visualization of the unit. Each product defines this as a bi… |
| 1.3.6.1.4.1.664.5.30.4.2 | ScalaradUnitAlarmStatus | read-only | current | A bit encoded string representing a summary of the alarm state of the chassis. Refer to individual unit documentation for the specification of the bimask |
| 1.3.6.1.4.1.664.5.30.5 | NodeadUnitSlots | |||
| 1.3.6.1.4.1.664.5.30.5.1 | TableadUnitSlotInfoTable | not-accessible | current | Table of slots available for boards. |
| 1.3.6.1.4.1.664.5.30.5.1.1 | RowadUnitSlotInfoEntry | not-accessible | current | General information descibing the contents of each card slot. |
| 1.3.6.1.4.1.664.5.30.5.1.1.1 | ColumnadUnitSlotInfoIndex | not-accessible | current | A unique value for each slot. Its value may exceed the value of adUnitSlotNumber if pseudo slot numbers are used for some bank commons or multiplexers. |
| 1.3.6.1.4.1.664.5.30.5.1.1.2 | ColumnadUnitSlotProdName | read-only | current | The Adtran Product Name. |
| 1.3.6.1.4.1.664.5.30.5.1.1.3 | ColumnadUnitSlotProdPartNumber | read-only | current | The Adtran Product Part Number. |
| 1.3.6.1.4.1.664.5.30.5.1.1.4 | ColumnadUnitSlotProdCLEIcode | read-only | current | The Adtran Product CLEI Code. |
| 1.3.6.1.4.1.664.5.30.5.1.1.5 | ColumnadUnitSlotProdSerialNumber | read-only | current | The Adtran Product Serial Number. |
| 1.3.6.1.4.1.664.5.30.5.1.1.6 | ColumnadUnitSlotProdRevision | read-only | current | The Adtran Product Revision Number. |
| 1.3.6.1.4.1.664.5.30.5.1.1.7 | ColumnadUnitSlotProdSwVersion | read-only | current | The Adtran Product Software Version Number. |
| 1.3.6.1.4.1.664.5.30.5.1.1.8 | ColumnadUnitSlotProdPhysAddress | read-only | current | This octet string variable contains the Adtran Physical Address assigned to this product. For example the octet sequence, 16 02 03 01, specifies channel bank n… |
| 1.3.6.1.4.1.664.5.30.5.1.1.9 | ColumnadUnitSlotInfoState | read-only | current | The state of the card slot. Initially it is empty. When a card is inserted, it becomes occupied, and the Slot Type is determined by the card Product Code. When… |
| 1.3.6.1.4.1.664.5.30.5.1.1.10 | ColumnadUnitSlotProduct | read-only | current | The ADTRAN Product code, 0 if empty. Agent will report real product code when installed or pre-provisioned. |
| 1.3.6.1.4.1.664.5.30.5.1.1.11 | ColumnadUnitSlotTrapEnable | read-write | current | Enables/Disables traps initiated from this slot. |
| 1.3.6.1.4.1.664.5.30.5.1.1.12 | ColumnadUnitSlotAlarmStatus | read-only | current | A bit encoded string representing the alarm state of the slot. The LSB should be 1 for No Alarm, else 0 and the higher order bits will indicate which alarms ar… |
| 1.3.6.1.4.1.664.5.30.5.1.1.13 | ColumnadUnitSlotFaceplate | read-only | current | A bit encoded string representing the status of faceplate indicators, LEDs, & switches for GUI visualization associated with the card in the respective slot. E… |
| 1.3.6.1.4.1.664.5.30.5.1.1.14 | ColumnadUnitSlotServiceState | read-write | current | |
| 1.3.6.1.4.1.664.5.30.6 | NodeadUnitPort | |||
| 1.3.6.1.4.1.664.5.30.6.3 | TableadUnitPortInfoTable | not-accessible | current | A table of hardware oriented port information on each card. This only includes actual card ports, and not layered logical interfaces. |
| 1.3.6.1.4.1.664.5.30.6.3.1 | RowadUnitPortInfoEntry | not-accessible | current | A row table entry exists for each card/port pair. |
| 1.3.6.1.4.1.664.5.30.6.3.1.1 | ColumnadUnitPortInfoIndex | not-accessible | current | A unique value for each physical port on a card. |
| 1.3.6.1.4.1.664.5.30.6.3.1.2 | ColumnadUnitPortInfoState | read-only | current | The state of the card port. Initially it is empty. |
| 1.3.6.1.4.1.664.5.30.6.3.1.3 | ColumnadUnitPortIfIndex | read-only | current | The interface number identified as ifIndex from the MIB-II interfaces table as defined by the slot and port numbers in this device. |
| 1.3.6.1.4.1.664.5.30.6.3.1.4 | ColumnadUnitPortAlarmStatus | read-only | current | A bit encoded string representing the alarm state of the port. |
| 1.3.6.1.4.1.664.5.30.6.3.1.5 | ColumnadUnitPortDescription | read-write | current | A character string to identify the name of a port. Used for trap varbind in last trap sent. Should default to port number string. Can be overridden by customer… |
| 1.3.6.1.4.1.664.5.30.6.4 | TableadUnitPortSlotMapTable | not-accessible | current | Table to map ifIndex to slot, port & type. |
| 1.3.6.1.4.1.664.5.30.6.4.1 | RowadUnitPortSlotMapEntry | not-accessible | current | An entry exists for each interface which is mapped to a physical slot/port pair. |
| 1.3.6.1.4.1.664.5.30.6.4.1.1 | ColumnadUnitSlotAddress | read-only | current | The slot in which this port is contained. Slot 0 is reported for the unit controller and all logical interfaces. |
| 1.3.6.1.4.1.664.5.30.6.4.1.2 | ColumnadUnitPortAddress | read-only | current | The port number within the slot. Logical interfaces should indicate port 0. |
| 1.3.6.1.4.1.664.5.30.7 | NodeadUnitConformance | |||
| 1.3.6.1.4.1.664.5.30.7.1 | NodeadUnitCompliances | |||
| 1.3.6.1.4.1.664.5.30.7.1.1 | ComplianceadUnitCompliance | read-only | current | The compliance statement for SNMPv2 entities which implement the adUnit MIB. |
| 1.3.6.1.4.1.664.5.30.7.2 | NodeadUnitMIBGroups | |||
| 1.3.6.1.4.1.664.5.30.7.2.1 | GroupadUnitBaseGroup | current | The Unit Base Group. | |
| 1.3.6.1.4.1.664.5.30.7.2.2 | GroupadUnitUserGroup | current | The Unit Telnet Group. | |
| 1.3.6.1.4.1.664.5.30.7.2.3 | GroupadUnitSNMPConfigGroup | current | The Unit SNMP Config Group. | |
| 1.3.6.1.4.1.664.5.30.7.2.4 | GroupadUnitMaintConsoleGroup | current | The Unit Maintenance Console Group. | |
| 1.3.6.1.4.1.664.5.30.7.2.5 | GroupadUnitSyslogGroup | current | The Unit Syslog Client Group. | |
| 1.3.6.1.4.1.664.5.30.7.2.6 | GroupadUnitTFTPGroup | current | The Unit TFTP Group. | |
| 1.3.6.1.4.1.664.5.30.7.2.7 | GroupadUnitCpuUtilGroup | current | The Unit CPU Utilization Group. | |
| 1.3.6.1.4.1.664.5.30.7.2.8 | GroupadUnitPingGroup | current | The Unit Ping Group. | |
| 1.3.6.1.4.1.664.5.30.7.2.9 | GroupadUnitTraceRtGroup | current | The Traceroute Group. | |
| 1.3.6.1.4.1.664.5.30.7.2.10 | GroupadUnitSlotGroup | current | The Unit Slot Group. | |
| 1.3.6.1.4.1.664.5.30.7.2.11 | GroupadUnitPortGroup | current | The Unit Slot Group. | |
| 1.3.6.1.4.1.664.5.30.7.2.12 | GroupadUnitsCndGroup | current | The CND Management Group. Support for this group is only required when the unit is to be managed in a CND environment. For instance, IADs which are remotely pr… | |
| 1.3.6.1.4.1.664.5.30.7.2.13 | GroupadUnitsExtendedBaseGroup | current | The Extended Base Group containing functions not supported by all units. | |
| 1.3.6.1.4.1.664.5.30.7.2.14 | GroupadUnitsExtendedSNMPGroup | current | The Extended SNMP Group containing functions not supported by all units. | |
| 1.3.6.1.4.1.664.5.30.7.2.15 | GroupadConsoleModemGroup | current | The Console Modem Group containing functions not supported by all units. | |
| 1.3.6.1.4.1.664.5.30.7.2.16 | GroupadUnitsExtendedSyslogGroup | current | The Extended Syslog Group containing functions not supported by all units. | |
| 1.3.6.1.4.1.664.5.30.7.2.17 | GroupadUnitExtendedPingGroup | current | The Unit Ping Group supporting extended Ping operations (for instance, sweep & verbose modes). |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdDualLEDstatus | INTEGER { off(1), green(2), red(3), yellow(4), blinkGreen(5), blinkRed(6), blinkYellow(7), fastBlinkGreen(8), fastBlinkRed(9), fastBlinkYellow(10), altGreenRed(11), altGreenYellow(12), altRedYellow(13) } | current | The status of an individual LED which has more than one color. |
| AdTftpConfigXferStatus | INTEGER { idle(1), tftpFilenotFound(2), tftpServerTimeout(3), errorNotEnoughMmemory(4), tftpDownloadInProgress(5), tftpUploadInProgress(6), tftpDownloadFailed(7), tftpUploadFailed(8), tftpDownloadComplete(9), tftpUploadComplete(10), tftpBadConfigFile(11), tftpBadFilesize(12), tftpNVRAMcfgCopyFailed(13), downloadCopyingInternalConfig(14), tftpFiletypeNotBinary(15), tftpFileRevisionTooOld(16), tftpRemoteDiskFull(17), tftpFileAlreadyExists(18), tftpFileAccessViolation(19), tftpBadFileChecksum(20), tftpReadNVRAMparseFailed(21), downoadWaitingOnNVRAMsave(22), uploadWritingInternalConfig(23) } | current | The status of a TFTP transfer |