MIB Viewer

ALTEON-CHEETAH-NETWORK-MIB

1761 objects
The MIB module for the Alteon OS Layer 3 configuration, statistics and information .
Imported Objects
ALTEON-ROOT-MIBaws-switch
SNMPv2-SMICounter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString PhysAddress
OIDNameAccessStatusDescription
1.3.6.1.4.1.1872.2.5.3Identitylayer3The MIB module for the Alteon OS Layer 3 configuration, statistics and information .
1.3.6.1.4.1.1872.2.5.3.1Nodelayer3Configs
1.3.6.1.4.1.1872.2.5.3.1.1NodeipInterfaceCfg
1.3.6.1.4.1.1872.2.5.3.1.1.1ScalaripInterfaceTableMaxread-onlycurrentThe maximum number of rows in the IP interface table. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.1.2TableipCurCfgIntfTablenot-accessiblecurrentThe table of IP interface configuration. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.1.2.1RowipCurCfgIntfEntrynot-accessiblecurrentA row in the Ip interface table, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.1ColumnipCurCfgIntfIndexread-onlycurrentThe interface number for which the IP information is related.
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.2ColumnipCurCfgIntfAddrread-onlycurrentThe IP address of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.3ColumnipCurCfgIntfMaskread-onlycurrentThe subnet mask of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.4ColumnipCurCfgIntfBroadcastread-onlyobsoleteThe broadcast address of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.5ColumnipCurCfgIntfVlanread-onlycurrentThe VLAN associated with the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.6ColumnipCurCfgIntfStateread-onlycurrentThe state of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.7ColumnipCurCfgIntfBootpRelayread-onlycurrentEnable/disable BOOTP relay.
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.9ColumnipCurCfgIntfIpVerread-onlycurrentThe type of IP address.
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.10ColumnipCurCfgIntfIpv6Addrread-onlycurrentThe IPv6 address of the interface. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xx…
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.11ColumnipCurCfgIntfPrefixLenread-onlycurrentThe prefix length associated with this IP address .
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.12ColumnipCurCfgIntfRouteAdvread-onlycurrentEnable/disable route advertisement of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.13ColumnipCurCfgIntfPeerread-onlycurrentThe Peer IP of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.14ColumnipCurCfgIntfDescriptionread-onlycurrentThe Description of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.2.1.15ColumnipCurCfgIntfBfdread-onlycurrentCurrent BFD on/off configuration on the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.3TableipNewCfgIntfTablenot-accessiblecurrentThe table of interface configuration in the New Configuration Block. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.1.3.1RowipNewCfgIntfEntrynot-accessiblecurrentA row in the Ip interface table, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.1ColumnipNewCfgIntfIndexread-onlycurrentThe interface number for which the IP information is related.
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.2ColumnipNewCfgIntfAddrread-createcurrentThe IP address of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.3ColumnipNewCfgIntfMaskread-createcurrentThe subnet mask of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.4ColumnipNewCfgIntfBroadcastread-createobsoleteThe broadcast address of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.5ColumnipNewCfgIntfVlanread-createcurrentThe VLAN associated with the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.6ColumnipNewCfgIntfStateread-createcurrentThe state of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.7ColumnipNewCfgIntfDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.8ColumnipNewCfgIntfBootpRelayread-createcurrentEnable/disable BOOTP relay.
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.10ColumnipNewCfgIntfIpVerread-createcurrentThe type of IP address.
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.11ColumnipNewCfgIntfIpv6Addrread-createcurrentThe IPv6 address of the interface. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xx…
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.12ColumnipNewCfgIntfPrefixLenread-createcurrentThe prefix length associated with this IP address .
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.13ColumnipNewCfgIntfRouteAdvread-createcurrentEnable/disable route advertisement of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.14ColumnipNewCfgIntfPeerread-createcurrentThe Peer IP of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.3.1.15ColumnipNewCfgIntfDescriptionread-createcurrentThe Description of the interface.
1.3.6.1.4.1.1872.2.5.3.1.1.4ScalaripCurLanIfIdread-onlycurrentHolds the LAN interface ID, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.1.5ScalaripNewLanIfIdread-createcurrentHolds the LAN interface ID, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.2NodeipGatewayCfg
1.3.6.1.4.1.1872.2.5.3.1.2.1ScalaripCurCfgGwMetricread-onlycurrentThe default gateway metric. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.2.2ScalaripNewCfgGwMetricread-writecurrentThe default gateway metric. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.2.3ScalaripGatewayTableMaxread-onlycurrentThe maximum number of rows in the IP gateway table. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.2.4TableipCurCfgGwTablenot-accessiblecurrentThe table of gateways in the Current configuration Block. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.2.4.1RowipCurCfgGwEntrynot-accessiblecurrentA row in the Ip gateway table
1.3.6.1.4.1.1872.2.5.3.1.2.4.1.1ColumnipCurCfgGwIndexread-onlycurrentThe gateway number for which the information is related.
1.3.6.1.4.1.1872.2.5.3.1.2.4.1.2ColumnipCurCfgGwAddrread-onlycurrentThe IP address of the default gateway.
1.3.6.1.4.1.1872.2.5.3.1.2.4.1.3ColumnipCurCfgGwIntervalread-onlycurrentThe interval between ping attempts.
1.3.6.1.4.1.1872.2.5.3.1.2.4.1.4ColumnipCurCfgGwRetryread-onlycurrentThe number of failed attempts to declare the default gateway DOWN.
1.3.6.1.4.1.1872.2.5.3.1.2.4.1.5ColumnipCurCfgGwStateread-onlycurrentThe state of the default gateway.
1.3.6.1.4.1.1872.2.5.3.1.2.4.1.6ColumnipCurCfgGwArpread-onlycurrentThe state of ARP/Neighbor Discovery health check.
1.3.6.1.4.1.1872.2.5.3.1.2.4.1.7ColumnipCurCfgGwVlanread-onlycurrentThe VLAN number for this gateway. The first 4 entries in the table are only used for default gateway load balancing hence the VLAN cannot be specified for the …
1.3.6.1.4.1.1872.2.5.3.1.2.4.1.8ColumnipCurCfgGwPriorityread-onlycurrentThe priority of the default route for this gateway. High priority means that the default gateway route will have higher priority over learned default routes. L…
1.3.6.1.4.1.1872.2.5.3.1.2.4.1.9ColumnipCurCfgGwIpVerread-onlycurrentThe type of IP address.
1.3.6.1.4.1.1872.2.5.3.1.2.4.1.10ColumnipCurCfgGwIpv6Addrread-onlycurrentThe IPv6 address of the gateway. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx…
1.3.6.1.4.1.1872.2.5.3.1.2.5TableipNewCfgGwTablenot-accessiblecurrentThe table of gateway configuration in the new configuration block. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.2.5.1RowipNewCfgGwEntrynot-accessiblecurrentA row in the Ip default gateway table, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.2.5.1.1ColumnipNewCfgGwIndexread-onlycurrentThe gateway number for which the information is related.
1.3.6.1.4.1.1872.2.5.3.1.2.5.1.2ColumnipNewCfgGwAddrread-createcurrentThe IP address of the default gateway.
1.3.6.1.4.1.1872.2.5.3.1.2.5.1.3ColumnipNewCfgGwIntervalread-createcurrentThe interval in seconds between ping attempts.
1.3.6.1.4.1.1872.2.5.3.1.2.5.1.4ColumnipNewCfgGwRetryread-createcurrentThe number of failed attempts to declare the default gateway DOWN.
1.3.6.1.4.1.1872.2.5.3.1.2.5.1.5ColumnipNewCfgGwStateread-createcurrentThe state of the default gateway.
1.3.6.1.4.1.1872.2.5.3.1.2.5.1.6ColumnipNewCfgGwDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.1872.2.5.3.1.2.5.1.7ColumnipNewCfgGwArpread-createcurrentThe state of the ARP/Neighbor Discovery health checks.
1.3.6.1.4.1.1872.2.5.3.1.2.5.1.8ColumnipNewCfgGwVlanread-createcurrentThe VLAN number for this gateway. The first 4 entries in the table are only used for default gateway load balancing hence the VLAN cannot be specified for the …
1.3.6.1.4.1.1872.2.5.3.1.2.5.1.9ColumnipNewCfgGwPriorityread-createcurrentThe priority of the default route for this gateway. High priority means that the default gateway route will have higher priority over learned default routes. L…
1.3.6.1.4.1.1872.2.5.3.1.2.5.1.10ColumnipNewCfgGwIpVerread-createcurrentThe type of IP address.
1.3.6.1.4.1.1872.2.5.3.1.2.5.1.11ColumnipNewCfgGwIpv6Addrread-createcurrentThe IPv6 address of the gateway. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx…
1.3.6.1.4.1.1872.2.5.3.1.3NodeipStaticRouteCfg
1.3.6.1.4.1.1872.2.5.3.1.3.1ScalaripStaticRouteTableMaxSizeread-onlycurrentThe maximum number of rows in the Static Route table. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.3.2TableipCurCfgStaticRouteTablenot-accessiblecurrentThe table of static routes in the current configuration block. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.3.2.1RowipCurCfgStaticRouteEntrynot-accessiblecurrentA row in the static IP route table
1.3.6.1.4.1.1872.2.5.3.1.3.2.1.1ColumnipCurCfgStaticRouteIndxread-onlycurrentThe index of the static routing table.
1.3.6.1.4.1.1872.2.5.3.1.3.2.1.2ColumnipCurCfgStaticRouteDestIpread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.1872.2.5.3.1.3.2.1.3ColumnipCurCfgStaticRouteMaskread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.1872.2.5.3.1.3.2.1.4ColumnipCurCfgStaticRouteGatewayread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.1872.2.5.3.1.3.2.1.5ColumnipCurCfgStaticRouteInterfaceread-onlycurrentThe IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
1.3.6.1.4.1.1872.2.5.3.1.3.3TableipNewCfgStaticRouteTablenot-accessiblecurrentThe table of static routes in the new configuration block. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.3.3.1RowipNewCfgStaticRouteEntrynot-accessiblecurrentA row in the static IP route table, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.3.3.1.1ColumnipNewCfgStaticRouteIndxread-onlycurrentThe index of the static routing table.
1.3.6.1.4.1.1872.2.5.3.1.3.3.1.2ColumnipNewCfgStaticRouteDestIpread-createcurrentThe destination IP address of this route.
1.3.6.1.4.1.1872.2.5.3.1.3.3.1.3ColumnipNewCfgStaticRouteMaskread-createcurrentThe subnet mask of this route.
1.3.6.1.4.1.1872.2.5.3.1.3.3.1.4ColumnipNewCfgStaticRouteGatewayread-createcurrentThe IP address of the gateway for this route.
1.3.6.1.4.1.1872.2.5.3.1.3.3.1.5ColumnipNewCfgStaticRouteActionread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.1872.2.5.3.1.3.3.1.6ColumnipNewCfgStaticRouteInterfaceread-createcurrentThe IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
1.3.6.1.4.1.1872.2.5.3.1.3.4Tableipv6CurCfgStaticRouteTablenot-accessiblecurrentThe table of ipv6 static routes in the current configuration block. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.3.4.1Rowipv6CurCfgStaticRouteEntrynot-accessiblecurrentA row in the static IP route table
1.3.6.1.4.1.1872.2.5.3.1.3.4.1.1Columnipv6CurCfgStaticRouteIndxread-onlycurrentThe index of the ipv6 static routing table.
1.3.6.1.4.1.1872.2.5.3.1.3.4.1.2Columnipv6CurCfgStaticRouteDestIpread-onlycurrentThe destination IPv6 address of this route. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxx…
1.3.6.1.4.1.1872.2.5.3.1.3.4.1.3Columnipv6CurCfgStaticRouteMaskread-onlycurrentThe prefix length associated with this IP address.
1.3.6.1.4.1.1872.2.5.3.1.3.4.1.4Columnipv6CurCfgStaticRouteGatewayread-onlycurrentThe destination IPv6 gateway address of this route. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following f…
1.3.6.1.4.1.1872.2.5.3.1.3.4.1.5Columnipv6CurCfgStaticRouteVlanread-onlycurrentThe IPv6 Vlan of this route. The IPv6 address of the specified Vlan shall be use as source IP when performs routing.
1.3.6.1.4.1.1872.2.5.3.1.3.5Tableipv6NewCfgStaticRouteTablenot-accessiblecurrentThe table of ipv6 static routes in the current configuration block. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.3.5.1Rowipv6NewCfgStaticRouteEntrynot-accessiblecurrentA row in the static IP route table, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.3.5.1.1Columnipv6NewCfgStaticRouteIndxread-createcurrentThe index of the ipv6 static routing table.
1.3.6.1.4.1.1872.2.5.3.1.3.5.1.2Columnipv6NewCfgStaticRouteDestIpread-createcurrentThe destination IPv6 address of this route. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxx…
1.3.6.1.4.1.1872.2.5.3.1.3.5.1.3Columnipv6NewCfgStaticRouteMaskread-createcurrentThe prefix length associated with this IP address.
1.3.6.1.4.1.1872.2.5.3.1.3.5.1.4Columnipv6NewCfgStaticRouteGatewayread-createcurrentThe destination IPv6 gateway address of this route. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following f…
1.3.6.1.4.1.1872.2.5.3.1.3.5.1.5Columnipv6NewCfgStaticRouteActionread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.1872.2.5.3.1.3.5.1.6Columnipv6NewCfgStaticRouteVlanread-createcurrentThe IPv6 Vlan of this route. The IPv6 address of the specified vlan shall be use as source IP when performs routing.
1.3.6.1.4.1.1872.2.5.3.1.3.6ScalaripStaticTnlRouteTableMaxSizeread-onlycurrentThe maximum number of rows in the Static Tunnel Route table.
1.3.6.1.4.1.1872.2.5.3.1.3.7TableipCurCfgStaticTnlRouteTablenot-accessiblecurrentThe table of static routes in the current configuration block.
1.3.6.1.4.1.1872.2.5.3.1.3.7.1RowipCurCfgStaticTnlRouteEntrynot-accessiblecurrentA row in the static IP route table
1.3.6.1.4.1.1872.2.5.3.1.3.7.1.1ColumnipCurCfgStaticTnlRouteIndxread-onlycurrentThe index of the static routing table.
1.3.6.1.4.1.1872.2.5.3.1.3.7.1.2ColumnipCurCfgStaticTnlRouteDestIpread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.1872.2.5.3.1.3.7.1.3ColumnipCurCfgStaticTnlRouteMaskread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.1872.2.5.3.1.3.7.1.4ColumnipCurCfgStaticTnlRouteTunnelIdread-onlycurrentTunnel ID for this route.
1.3.6.1.4.1.1872.2.5.3.1.3.8TableipNewCfgStaticTnlRouteTablenot-accessiblecurrentThe table of static routes in the new configuration block.
1.3.6.1.4.1.1872.2.5.3.1.3.8.1RowipNewCfgStaticTnlRouteEntrynot-accessiblecurrentA row in the static IP route table
1.3.6.1.4.1.1872.2.5.3.1.3.8.1.1ColumnipNewCfgStaticTnlRouteIndxread-onlycurrentThe index of the static routing table.
1.3.6.1.4.1.1872.2.5.3.1.3.8.1.2ColumnipNewCfgStaticTnlRouteDestIpread-createcurrentThe destination IP address of this route.
1.3.6.1.4.1.1872.2.5.3.1.3.8.1.3ColumnipNewCfgStaticTnlRouteMaskread-createcurrentThe subnet mask of this route.
1.3.6.1.4.1.1872.2.5.3.1.3.8.1.4ColumnipNewCfgStaticTnlRouteTunnelIdread-createcurrentTunnel ID for this route.
1.3.6.1.4.1.1872.2.5.3.1.3.8.1.5ColumnipNewCfgStaticTnlRouteActionread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.1872.2.5.3.1.3.9Tableipv6CurCfgStaticTnlRouteTablenot-accessiblecurrentThe table of static routes in the current configuration block.
1.3.6.1.4.1.1872.2.5.3.1.3.9.1Rowipv6CurCfgStaticTnlRouteEntrynot-accessiblecurrentA row in the static IP route table
1.3.6.1.4.1.1872.2.5.3.1.3.9.1.1Columnipv6CurCfgStaticTnlRouteIndxread-onlycurrentThe index of the static routing table.
1.3.6.1.4.1.1872.2.5.3.1.3.9.1.2Columnipv6CurCfgStaticTnlRouteDestIpread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.1872.2.5.3.1.3.9.1.3Columnipv6CurCfgStaticTnlRoutePrefixLenread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.1872.2.5.3.1.3.9.1.4Columnipv6CurCfgStaticTnlRouteTunnelIdread-onlycurrentTunnel ID for this route.
1.3.6.1.4.1.1872.2.5.3.1.3.10Tableipv6NewCfgStaticTnlRouteTablenot-accessiblecurrentThe table of static routes in the new configuration block.
1.3.6.1.4.1.1872.2.5.3.1.3.10.1Rowipv6NewCfgStaticTnlRouteEntrynot-accessiblecurrentA row in the static IP route table
1.3.6.1.4.1.1872.2.5.3.1.3.10.1.1Columnipv6NewCfgStaticTnlRouteIndxread-onlycurrentThe index of the static routing table.
1.3.6.1.4.1.1872.2.5.3.1.3.10.1.2Columnipv6NewCfgStaticTnlRouteDestIpread-createcurrentThe destination IP address of this route.
1.3.6.1.4.1.1872.2.5.3.1.3.10.1.3Columnipv6NewCfgStaticTnlRoutePrefixLenread-createcurrentThe subnet mask of this route.
1.3.6.1.4.1.1872.2.5.3.1.3.10.1.4Columnipv6NewCfgStaticTnlRouteTunnelIdread-createcurrentTunnel ID for this route.
1.3.6.1.4.1.1872.2.5.3.1.3.10.1.5Columnipv6NewCfgStaticTnlRouteActionread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.1872.2.5.3.1.4NodeipForwardCfg
1.3.6.1.4.1.1872.2.5.3.1.4.1NodeipFwdGeneralCfg
1.3.6.1.4.1.1872.2.5.3.1.4.1.1ScalaripFwdCurCfgStateread-onlycurrentIP forwarding global state. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.1.2ScalaripFwdNewCfgStateread-writecurrentIP forwarding global state. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.1.3ScalaripFwdCurCfgDirectedBcastread-onlycurrentEnable or disable forwarding directed broadcasts. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.1.4ScalaripFwdNewCfgDirectedBcastread-writecurrentEnable or disable forwarding directed broadcasts. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.1.5ScalaripFwdCurCfgNoICMPRedirectread-onlycurrentEnable or disable no icmp redirects. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.1.6ScalaripFwdNewCfgNoICMPRedirectread-writecurrentEnable or disable no icmp redirects. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.1.7ScalaripFwdCurCfgRtCacheread-onlycurrentEnable or disable SP Route Caching. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.1.8ScalaripFwdNewCfgRtCacheread-writecurrentEnable or disable SP Route Caching. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.2ScalaripFwdPortTableMaxSizeread-onlycurrentThe maximum number of rows in the IP Port table. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.3TableipFwdCurCfgPortTablenot-accessiblecurrentThe table of ports and their forwarding states, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.3.1RowipFwdCurCfgPortEntrynot-accessiblecurrentA row in the ipFwdCurCfgPortTable, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.3.1.1ColumnipFwdCurCfgPortIndexread-onlycurrentThe port number for which the forwarding state information pertains.
1.3.6.1.4.1.1872.2.5.3.1.4.3.1.2ColumnipFwdCurCfgPortStateread-onlycurrentThe forwarding state of the port.
1.3.6.1.4.1.1872.2.5.3.1.4.4TableipFwdNewCfgPortTablenot-accessiblecurrentThe table of ports and their forwarding states, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.4.1RowipFwdNewCfgPortEntrynot-accessiblecurrentA row in the ipFwdNewCfgPortTable, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.4.1.1ColumnipFwdNewCfgPortIndexread-onlycurrentThe port number for which the forwarding state information pertains.
1.3.6.1.4.1.1872.2.5.3.1.4.4.1.2ColumnipFwdNewCfgPortStateread-writecurrentThe forwarding state of the port.
1.3.6.1.4.1.1872.2.5.3.1.4.5ScalaripFwdLocalTableMaxSizeread-onlycurrentThe maximum number of rows in the Local table. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.6TableipFwdCurCfgLocalTablenot-accessiblecurrentThe table of local network definition. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.6.1RowipFwdCurCfgLocalEntrynot-accessiblecurrentA row in the ipFwdCurCfgLocalTable, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.6.1.1ColumnipFwdCurCfgLocalIndexread-onlycurrentThe index of ipFwdCurCfgLocalTable.
1.3.6.1.4.1.1872.2.5.3.1.4.6.1.2ColumnipFwdCurCfgLocalSubnetread-onlycurrentThe current local IP subnet.
1.3.6.1.4.1.1872.2.5.3.1.4.6.1.3ColumnipFwdCurCfgLocalMaskread-onlycurrentThe current local IP subnet mask.
1.3.6.1.4.1.1872.2.5.3.1.4.7TableipFwdNewCfgLocalTablenot-accessiblecurrentThe table of local network definition. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.7.1RowipFwdNewCfgLocalEntrynot-accessiblecurrentA row in the ipFwdNewCfgLocalTable, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.7.1.1ColumnipFwdNewCfgLocalIndexread-onlycurrentThe index of ipFwdNewCfgLocalTable.
1.3.6.1.4.1.1872.2.5.3.1.4.7.1.2ColumnipFwdNewCfgLocalSubnetread-createcurrentThe new local IP subnet.
1.3.6.1.4.1.1872.2.5.3.1.4.7.1.3ColumnipFwdNewCfgLocalMaskread-createcurrentThe new local IP subnet mask.
1.3.6.1.4.1.1872.2.5.3.1.4.7.1.4ColumnipFwdNewCfgLocalDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.4.8Tableipv6FwdCurCfgLocalTablenot-accessiblecurrentThe table of local network definition. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.8.1Rowipv6FwdCurCfgLocalEntrynot-accessiblecurrentA row in the ipv6FwdCurCfgLocalTable, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.8.1.1Columnipv6FwdCurCfgLocalIndexread-onlycurrentThe index of ipv6FwdCurCfgLocalTable.
1.3.6.1.4.1.1872.2.5.3.1.4.8.1.2Columnipv6FwdCurCfgLocalSubnetread-onlycurrentThe current local IPv6 subnet.
1.3.6.1.4.1.1872.2.5.3.1.4.8.1.3Columnipv6FwdCurCfgLocalMaskread-onlycurrentThe current local IPv6 subnet mask.
1.3.6.1.4.1.1872.2.5.3.1.4.9Tableipv6FwdNewCfgLocalTablenot-accessiblecurrentThe table of local IPv6 network definition. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.4.9.1Rowipv6FwdNewCfgLocalEntrynot-accessiblecurrentA row in the ipv6FwdNewCfgLocalTable
1.3.6.1.4.1.1872.2.5.3.1.4.9.1.1Columnipv6FwdNewCfgLocalIndexread-onlycurrentThe index of ipv6FwdNewCfgLocalTable.
1.3.6.1.4.1.1872.2.5.3.1.4.9.1.2Columnipv6FwdNewCfgLocalSubnetread-createcurrentThe new local IPv6 subnet.
1.3.6.1.4.1.1872.2.5.3.1.4.9.1.3Columnipv6FwdNewCfgLocalMaskread-createcurrentThe new local IPv6 subnet mask.
1.3.6.1.4.1.1872.2.5.3.1.4.9.1.4Columnipv6FwdNewCfgLocalDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.5NoderipCfg
1.3.6.1.4.1.1872.2.5.3.1.5.1ScalarripCurCfgSupplyread-onlycurrentEnable or disable supplying route updates for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.5.2ScalarripNewCfgSupplyread-writecurrentEnable or disable supplying route updates for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.5.3ScalarripCurCfgListenread-onlycurrentEnable or disable listening to route updates for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.5.4ScalarripNewCfgListenread-writecurrentEnable or disable listening to route updates for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.5.5ScalarripCurCfgDefListenread-onlycurrentEnable or disable listening to default routes for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.5.6ScalarripNewCfgDefListenread-writecurrentEnable or disable listening to default routes for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.5.7ScalarripCurCfgStaticSupplyread-onlycurrentEnable or disable supplying static route updates for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualizat…
1.3.6.1.4.1.1872.2.5.3.1.5.8ScalarripNewCfgStaticSupplyread-writecurrentEnable or disable supplying static route updates for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualizat…
1.3.6.1.4.1.1872.2.5.3.1.5.9ScalarripCurCfgUpdatePeriodread-onlycurrentUpdate Period in seconds for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.5.10ScalarripNewCfgUpdatePeriodread-writecurrentUpdate period in seconds for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.5.11ScalarripCurCfgStateread-onlycurrentRIP global state for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.5.12ScalarripNewCfgStateread-writecurrentGlobally turn RIP on or off for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.5.13ScalarripCurCfgPoisonReverseread-onlycurrentRIPv1 poison reverse. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.5.14ScalarripNewCfgPoisonReverseread-writecurrentRIPv1 poison reverse. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.5.15ScalarripCurCfgVipread-onlycurrentAdvertise VIP Host Routes for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.5.16ScalarripNewCfgVipread-writecurrentAdvertise VIP Host Routes for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6NodevrrpCfg
1.3.6.1.4.1.1872.2.5.3.1.6.1NodevrrpGeneral
1.3.6.1.4.1.1872.2.5.3.1.6.1.1ScalarvrrpCurCfgGenStateread-onlycurrentEnable or disable VRRP operation globally. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.1.2ScalarvrrpNewCfgGenStateread-writecurrentEnable or disable VRRP operation globally. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.1.3ScalarvrrpCurCfgGenTckVirtRtrIncread-onlycurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers. Note:This mib is not supported for VX i…
1.3.6.1.4.1.1872.2.5.3.1.6.1.4ScalarvrrpNewCfgGenTckVirtRtrIncread-writecurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers. Note:This mib is not supported for VX i…
1.3.6.1.4.1.1872.2.5.3.1.6.1.5ScalarvrrpCurCfgGenTckIpIntfIncread-onlycurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces. Note:This mib is not supported for VX…
1.3.6.1.4.1.1872.2.5.3.1.6.1.6ScalarvrrpNewCfgGenTckIpIntfIncread-writecurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces. Note:This mib is not supported for VX…
1.3.6.1.4.1.1872.2.5.3.1.6.1.7ScalarvrrpCurCfgGenTckVlanPortIncread-onlycurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual…
1.3.6.1.4.1.1872.2.5.3.1.6.1.8ScalarvrrpNewCfgGenTckVlanPortIncread-writecurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual…
1.3.6.1.4.1.1872.2.5.3.1.6.1.9ScalarvrrpCurCfgGenTckL4PortIncread-onlycurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as…
1.3.6.1.4.1.1872.2.5.3.1.6.1.10ScalarvrrpNewCfgGenTckL4PortIncread-writecurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as…
1.3.6.1.4.1.1872.2.5.3.1.6.1.11ScalarvrrpCurCfgGenTckRServerIncread-onlycurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a…
1.3.6.1.4.1.1872.2.5.3.1.6.1.12ScalarvrrpNewCfgGenTckRServerIncread-writecurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a…
1.3.6.1.4.1.1872.2.5.3.1.6.1.13ScalarvrrpCurCfgGenTckHsrpIncread-onlycurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements. Note:This mib is not supported for VX instance of …
1.3.6.1.4.1.1872.2.5.3.1.6.1.14ScalarvrrpNewCfgGenTckHsrpIncread-writecurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements. Note:This mib is not supported for VX instance of …
1.3.6.1.4.1.1872.2.5.3.1.6.1.15ScalarvrrpCurCfgGenHotstandbyread-onlycurrentEnable or disable hotstandby processing. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.1.16ScalarvrrpNewCfgGenHotstandbyread-writecurrentEnable or disable hotstandby processing. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.1.17ScalarvrrpCurCfgGenTckHsrvIncread-onlycurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN. Note:This mib is not supported for VX inst…
1.3.6.1.4.1.1872.2.5.3.1.6.1.18ScalarvrrpNewCfgGenTckHsrvIncread-writecurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN. Note:This mib is not supported for VX inst…
1.3.6.1.4.1.1872.2.5.3.1.6.1.19ScalarvrrpCurCfgGenHoldoffread-onlycurrentThe time for VRRP virtual router to hold before it begins to change state to backup or master state. Note:This mib is not supported for VX instance of Virtuali…
1.3.6.1.4.1.1872.2.5.3.1.6.1.20ScalarvrrpNewCfgGenHoldoffread-writecurrentThe time for VRRP virtual router to hold before it begins to change state to backup or master state. Note:This mib is not supported for VX instance of Virtuali…
1.3.6.1.4.1.1872.2.5.3.1.6.1.23ScalarvrrpCurCfgGenOspfCostread-onlycurrentOSPF Cost Adjustment, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.1.24ScalarvrrpNewCfgGenOspfCostread-writecurrentOSPF Cost Adjustment, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.1.25ScalarvrrpCurCfgGenTckSwExtIncread-onlycurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the availability of Switch Extension in the chassis. Note:This mib is not s…
1.3.6.1.4.1.1872.2.5.3.1.6.1.26ScalarvrrpNewCfgGenTckSwExtIncread-writecurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the availability of Switch Extension in the chassis. Note:This mib is not s…
1.3.6.1.4.1.1872.2.5.3.1.6.1.27ScalarvrrpCurCfgGenUnicastread-onlycurrentEnable or disable unicast advertisement. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.1.28ScalarvrrpNewCfgGenUnicastread-writecurrentEnable or disable unicast advertisement. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.1.29ScalarvrrpCurCfgGenFovdelayread-onlycurrentEnable/disable the delay to process the traffic on ports during failover (hot-standby only). Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.1.30ScalarvrrpNewCfgGenFovdelayread-writecurrentEnable/disable the delay to process the traffic on ports during failover (hot-standby only). Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.2ScalarvrrpVirtRtrTableMaxSizeread-onlycurrentThe maximum number of entries in VRRP virtual router table. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.3TablevrrpCurCfgVirtRtrTablenot-accessiblecurrentThe table of VRRP virtual routers configuration in current_config. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1RowvrrpCurCfgVirtRtrTableEntrynot-accessiblecurrentInformation about a VRRP virtual router. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.1ColumnvrrpCurCfgVirtRtrIndxread-onlycurrentThe VRRP virtual router table index.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.2ColumnvrrpCurCfgVirtRtrIDread-onlycurrentThe VRRP virtual router identifier.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.3ColumnvrrpCurCfgVirtRtrAddrread-onlycurrentThe VRRP virtual router IP address.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.4ColumnvrrpCurCfgVirtRtrIfIndexread-onlycurrentThe IfIndex that the VRRP virtual router is representing.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.5ColumnvrrpCurCfgVirtRtrIntervalread-onlycurrentThe time interval between VRRP advertisements in seconds.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.6ColumnvrrpCurCfgVirtRtrPriorityread-onlycurrentThe priority value to be used by the specified VRRP virtual routers.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.7ColumnvrrpCurCfgVirtRtrPreemptread-onlycurrentThis is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohib…
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.8ColumnvrrpCurCfgVirtRtrStateread-onlycurrentEnable or disable the VRRP virtual router.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.9ColumnvrrpCurCfgVirtRtrSharingread-onlycurrentEnable or disable load sharing of non-master virtual router.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.10ColumnvrrpCurCfgVirtRtrTckVirtRtrread-onlycurrentEnable or disable tracking other virtual routers for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.11ColumnvrrpCurCfgVirtRtrTckIpIntfread-onlycurrentEnable or disable tracking other router interfaces for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.12ColumnvrrpCurCfgVirtRtrTckVlanPortread-onlycurrentEnable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.13ColumnvrrpCurCfgVirtRtrTckL4Portread-onlycurrentEnable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when vi…
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.14ColumnvrrpCurCfgVirtRtrTckRServerread-onlycurrentEnable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when vi…
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.15ColumnvrrpCurCfgVirtRtrTckHsrpread-onlycurrentEnable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virt…
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.16ColumnvrrpCurCfgVirtRtrTckHsrvread-onlycurrentEnable or disable tracking HSRP advertisements by VLAN for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied w…
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.17ColumnvrrpCurCfgVirtRtrVersionread-onlycurrentThe VRRP virtual router IP Version.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.18ColumnvrrpCurCfgVirtRtrIpv6Addrread-onlycurrentThe IPv6 address of the virtual router. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xx…
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.19ColumnvrrpCurCfgVirtRtrIpv6Intervalread-onlycurrentThe time interval between IPv6 VRRP advertisements in centiseconds.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.20ColumnvrrpCurCfgVirtRtrOspfCostread-onlycurrentOSPF cost adjustment
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.21ColumnvrrpCurCfgVirtRtrTckSwExtread-onlycurrentEnable or disable tracking the Switch Extension availability for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckSwExtInc.
1.3.6.1.4.1.1872.2.5.3.1.6.3.1.22ColumnvrrpCurCfgVirtRtrTckIslPortread-onlycurrentInclude or exclude ISL ports in tracking.
1.3.6.1.4.1.1872.2.5.3.1.6.4TablevrrpNewCfgVirtRtrTablenot-accessiblecurrentThe table of VRRP virtual routers configuration in current_config. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1RowvrrpNewCfgVirtRtrTableEntrynot-accessiblecurrentInformation about a VRRP virtual router. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.1ColumnvrrpNewCfgVirtRtrIndxread-onlycurrentThe VRRP virtual router table index.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.2ColumnvrrpNewCfgVirtRtrIDread-createcurrentThe VRRP virtual router identifier.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.3ColumnvrrpNewCfgVirtRtrAddrread-createcurrentThe VRRP virtual router IP address.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.4ColumnvrrpNewCfgVirtRtrIfIndexread-createcurrentThe IfIndex that the VRRP virtual router is representing.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.5ColumnvrrpNewCfgVirtRtrIntervalread-createcurrentThe time interval between VRRP advertisements in seconds.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.6ColumnvrrpNewCfgVirtRtrPriorityread-createcurrentThe priority value to be used by the specified VRRP virtual router.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.7ColumnvrrpNewCfgVirtRtrPreemptread-createcurrentThis is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohib…
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.8ColumnvrrpNewCfgVirtRtrStateread-createcurrentEnable or disable the VRRP virtual router.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.9ColumnvrrpNewCfgVirtRtrDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.10ColumnvrrpNewCfgVirtRtrSharingread-createcurrentEnable or disable load sharing of non-master virtual router.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.11ColumnvrrpNewCfgVirtRtrTckVirtRtrread-createcurrentEnable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.12ColumnvrrpNewCfgVirtRtrTckIpIntfread-createcurrentEnable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.13ColumnvrrpNewCfgVirtRtrTckVlanPortread-createcurrentEnable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.14ColumnvrrpNewCfgVirtRtrTckL4Portread-createcurrentEnable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when vi…
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.15ColumnvrrpNewCfgVirtRtrTckRServerread-createcurrentEnable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when vi…
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.16ColumnvrrpNewCfgVirtRtrTckHsrpread-createcurrentEnable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virt…
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.17ColumnvrrpNewCfgVirtRtrTckHsrvread-createcurrentEnable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied w…
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.18ColumnvrrpNewCfgVirtRtrVersionread-createcurrentThe VRRP virtual router IP Version.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.19ColumnvrrpNewCfgVirtRtrIpv6Addrread-createcurrentThe IPv6 address of the virtual router. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xx…
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.20ColumnvrrpNewCfgVirtRtrIpv6Intervalread-createcurrentThe time interval between IPv6 VRRP advertisements in centiseconds.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.21ColumnvrrpNewCfgVirtRtrOspfCostread-createcurrentOSPF Cost Adjustment
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.22ColumnvrrpNewCfgVirtRtrTckSwExtread-createcurrentEnable or disable tracking Switch Extension availability for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckSwExtInc.
1.3.6.1.4.1.1872.2.5.3.1.6.4.1.23ColumnvrrpNewCfgVirtRtrTckIslPortread-createcurrentInclude or exclude ISL ports in tracking.
1.3.6.1.4.1.1872.2.5.3.1.6.5ScalarvrrpIfTableMaxSizeread-onlycurrentThe maximum number of entries in VRRP interface table. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.6TablevrrpCurCfgIfTablenot-accessiblecurrentThe table of VRRP interface configuration in current_config. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.6.1RowvrrpCurCfgIfTableEntrynot-accessiblecurrentInformation about a VRRP interface. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.6.1.1ColumnvrrpCurCfgIfIndxread-onlycurrentThe VRRP interface index. This is equivalent to IfIndex.
1.3.6.1.4.1.1872.2.5.3.1.6.6.1.2ColumnvrrpCurCfgIfAuthTyperead-onlycurrentType of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpCurCfgIfPasswd for authentication.
1.3.6.1.4.1.1872.2.5.3.1.6.6.1.3ColumnvrrpCurCfgIfPasswdread-onlycurrentThe password for authentication.
1.3.6.1.4.1.1872.2.5.3.1.6.6.1.4ColumnvrrpCurCfgIfIpAddrread-onlycurrentThe IP address of the VRRP interface.This is equivalent to ipCurCfgIntfAddr.
1.3.6.1.4.1.1872.2.5.3.1.6.7TablevrrpNewCfgIfTablenot-accessiblecurrentThe table of VRRP interface configuration in current_config. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.7.1RowvrrpNewCfgIfTableEntrynot-accessiblecurrentInformation about a VRRP interface. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.7.1.1ColumnvrrpNewCfgIfIndxread-onlycurrentThe VRRP interface index. This is equivalent to IfIndex.
1.3.6.1.4.1.1872.2.5.3.1.6.7.1.2ColumnvrrpNewCfgIfAuthTyperead-createcurrentType of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpNewCfgIfPasswd for authentication.
1.3.6.1.4.1.1872.2.5.3.1.6.7.1.3ColumnvrrpNewCfgIfPasswdread-createcurrentThe password for authentication.
1.3.6.1.4.1.1872.2.5.3.1.6.7.1.4ColumnvrrpNewCfgIfDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.6.8ScalarvrrpVirtRtrGrpTableMaxSizeread-onlycurrentThe maximum number of entries in VRRP Group table. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.9TablevrrpCurCfgVirtRtrGrpTablenot-accessiblecurrentThe table of VRRP virtual router group in current_config. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1RowvrrpCurCfgVirtRtrGrpTableEntrynot-accessiblecurrentInformation about a VRRP failover virtual router. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.1ColumnvrrpCurCfgVirtRtrGrpIndxread-onlycurrentThe VRRP virtual router table index.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.2ColumnvrrpCurCfgVirtRtrGrpIDread-onlycurrentThe VRRP virtual router identifier.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.3ColumnvrrpCurCfgVirtRtrGrpIfIndexread-onlycurrentThe IfIndex that the VRRP virtual router is representing.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.4ColumnvrrpCurCfgVirtRtrGrpIntervalread-onlycurrentThe time interval between VRRP advertisements in seconds.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.5ColumnvrrpCurCfgVirtRtrGrpPriorityread-onlycurrentThe priority value to be used by the specified VRRP virtual routers.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.6ColumnvrrpCurCfgVirtRtrGrpPreemptread-onlycurrentThis is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohib…
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.7ColumnvrrpCurCfgVirtRtrGrpStateread-onlycurrentEnable or disable the VRRP virtual router.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.8ColumnvrrpCurCfgVirtRtrGrpSharingread-onlycurrentEnable or disable load sharing of non-master virtual router.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.9ColumnvrrpCurCfgVirtRtrGrpTckVirtRtrread-onlycurrentEnable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.10ColumnvrrpCurCfgVirtRtrGrpTckIpIntfread-onlycurrentEnable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.11ColumnvrrpCurCfgVirtRtrGrpTckVlanPortread-onlycurrentEnable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.12ColumnvrrpCurCfgVirtRtrGrpTckL4Portread-onlycurrentEnable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when vi…
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.13ColumnvrrpCurCfgVirtRtrGrpTckRServerread-onlycurrentEnable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when vi…
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.14ColumnvrrpCurCfgVirtRtrGrpTckHsrpread-onlycurrentEnable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virt…
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.15ColumnvrrpCurCfgVirtRtrGrpTckHsrvread-onlycurrentEnable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied w…
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.16ColumnvrrpCurCfgVirtRtrGrpVersionread-onlycurrentThe VRRP virtual router group IP Version.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.17ColumnvrrpCurCfgVirtRtrGrpIpv6Intervalread-onlycurrentThe time interval between IPv6 VRRP advertisements in centiseconds.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.18ColumnvrrpCurCfgVirtRtrGrpOspfCostread-onlycurrentOSPF Cost Adjustment
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.19ColumnvrrpCurCfgVirtRtrGrpTckSwExtread-onlycurrentEnable or disable tracking Switch Extension availability for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckSwExtInc.
1.3.6.1.4.1.1872.2.5.3.1.6.9.1.20ColumnvrrpCurCfgVirtRtrGrpTckIslPortread-onlycurrentInclude or exclude ISL ports in tracking.
1.3.6.1.4.1.1872.2.5.3.1.6.10TablevrrpNewCfgVirtRtrGrpTablenot-accessiblecurrentThe table of VRRP virtual router group configuration in new_config. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1RowvrrpNewCfgVirtRtrGrpTableEntrynot-accessiblecurrentInformation about a VRRP failover virtual router. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.1ColumnvrrpNewCfgVirtRtrGrpIndxread-onlycurrentThe VRRP virtual router table index.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.2ColumnvrrpNewCfgVirtRtrGrpIDread-createcurrentThe VRRP virtual router identifier.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.3ColumnvrrpNewCfgVirtRtrGrpIfIndexread-createcurrentThe IfIndex that the VRRP virtual router is representing.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.4ColumnvrrpNewCfgVirtRtrGrpIntervalread-createcurrentThe time interval between VRRP advertisements in seconds.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.5ColumnvrrpNewCfgVirtRtrGrpPriorityread-createcurrentThe priority value to be used by the specified VRRP virtual router.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.6ColumnvrrpNewCfgVirtRtrGrpPreemptread-createcurrentThis is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohib…
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.7ColumnvrrpNewCfgVirtRtrGrpStateread-createcurrentEnable or disable the VRRP virtual router.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.8ColumnvrrpNewCfgVirtRtrGrpDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.9ColumnvrrpNewCfgVirtRtrGrpSharingread-createcurrentEnable or disable load sharing of non-master virtual router.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.10ColumnvrrpNewCfgVirtRtrGrpTckVirtRtrread-createcurrentEnable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.11ColumnvrrpNewCfgVirtRtrGrpTckIpIntfread-createcurrentEnable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.12ColumnvrrpNewCfgVirtRtrGrpTckVlanPortread-createcurrentEnable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.13ColumnvrrpNewCfgVirtRtrGrpTckL4Portread-createcurrentEnable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when vi…
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.14ColumnvrrpNewCfgVirtRtrGrpTckRServerread-createcurrentEnable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when vi…
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.15ColumnvrrpNewCfgVirtRtrGrpTckHsrpread-createcurrentEnable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virt…
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.16ColumnvrrpNewCfgVirtRtrGrpTckHsrvread-createcurrentEnable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied w…
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.17ColumnvrrpNewCfgVirtRtrGrpVersionread-createcurrentThe VRRP virtual router group IP Version.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.18ColumnvrrpNewCfgVirtRtrGrpIpv6Intervalread-createcurrentThe time interval between IPv6 VRRP advertisements in centiseconds.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.19ColumnvrrpNewCfgVirtRtrGrpOspfCostread-createcurrentOSPF Cost Adjustment
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.20ColumnvrrpNewCfgVirtRtrGrpTckSwExtread-createcurrentEnable or disable tracking Switch Extension availability for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckSwExtInc.
1.3.6.1.4.1.1872.2.5.3.1.6.10.1.21ColumnvrrpNewCfgVirtRtrGrpTckIslPortread-createcurrentInclude or exclude ISL ports in tracking.
1.3.6.1.4.1.1872.2.5.3.1.6.11ScalarvrrpVirtRtrVrGrpTableMaxSizeread-onlycurrentThe maximum number of entries in VRRP VrGroup table. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.12TablevrrpCurCfgVirtRtrVrGrpTablenot-accessiblecurrentThe table of VRRP virtual router vrgroup configuration in the current config. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.12.1RowvrrpCurCfgVirtRtrVrGrpTableEntrynot-accessiblecurrentInformation about setting VRRP virtual router vrgroup. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.1ColumnvrrpCurCfgVirtRtrVrGrpIndxread-onlycurrentThe VRRP virtual router vrgroup table index.
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.2ColumnvrrpCurCfgVirtRtrVrGrpNameread-onlycurrentThe VRRP virtual router vrgroup name.
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.3ColumnvrrpCurCfgVirtRtrVrGrpStateread-onlycurrentEnable or disable VRRP Vrgroup state
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.4ColumnvrrpCurCfgVirtRtrVrGrpBmapread-onlycurrentThe virtual routers added for to this VRRP vrgroup. The selected virtual routers are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xx…
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.5ColumnvrrpCurCfgVirtRtrVrGrpPriorityread-onlycurrentThe priority value to be used by the specified VRRP virtual routers.
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.6ColumnvrrpCurCfgVirtRtrVrGrpTckIpIntfread-onlycurrentEnable or disable tracking interfaces in vrgroup for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.7ColumnvrrpCurCfgVirtRtrVrGrpTckVlanPortread-onlycurrentEnable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.8ColumnvrrpCurCfgVirtRtrVrGrpTckL4Portread-onlycurrentEnable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when vi…
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.9ColumnvrrpCurCfgVirtRtrVrGrpTckRServerread-onlycurrentEnable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when vi…
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.10ColumnvrrpCurCfgVirtRtrVrGrpTckHsrpread-onlycurrentEnable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virt…
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.11ColumnvrrpCurCfgVirtRtrVrGrpTckHsrvread-onlycurrentEnable or disable tracking HSRP advertisements by VLAN for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied w…
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.12ColumnvrrpCurCfgVirtRtrVrGrpTckVirtRtrNoread-onlycurrentThe track virtual router for group.
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.13ColumnvrrpCurCfgVirtRtrVrGrpAddread-onlycurrentSpecify virtual router number which needs to be added to group.
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.14ColumnvrrpCurCfgVirtRtrVrGrpAdverIntervalread-onlycurrentThe advertisement interval for virtual router group.
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.15ColumnvrrpCurCfgVirtRtrVrGrpPreemptionread-onlycurrentEnable/Disable preemption for virtual router group.
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.16ColumnvrrpCurCfgVirtRtrVrGrpSharingread-onlycurrentEnable/Disable sharing for virtual router group.
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.17ColumnvrrpCurCfgVirtRtrVrGrpOspfCostread-onlycurrentOSPF Cost Adjustment
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.18ColumnvrrpCurCfgVirtRtrVrGrpTckSwExtread-onlycurrentEnable or disable tracking Switch Extension availability for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckSwExtInc.
1.3.6.1.4.1.1872.2.5.3.1.6.12.1.19ColumnvrrpCurCfgVirtRtrVrGrpTckIslPortread-onlycurrentInclude or exclude ISL ports in tracking.
1.3.6.1.4.1.1872.2.5.3.1.6.13TablevrrpNewCfgVirtRtrVrGrpTablenot-accessiblecurrentThe table of VRRP virtual router vrgroup configuration in new_config. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1RowvrrpNewCfgVirtRtrVrGrpTableEntrynot-accessiblecurrentInformation about setting VRRP virtual router Vrgroup. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.1ColumnvrrpNewCfgVirtRtrVrGrpIndxread-onlycurrentThe VRRP virtual router vrgroup table index.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.2ColumnvrrpNewCfgVirtRtrVrGrpNameread-createcurrentThe VRRP virtual router vrgroup name.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.3ColumnvrrpNewCfgVirtRtrVrGrpAddread-createcurrentThe VRRP virtual router to be added to this vrgroup table.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.4ColumnvrrpNewCfgVirtRtrVrGrpRemread-createcurrentThe VRRP virtual router to be removed from this vrgroup table.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.5ColumnvrrpNewCfgVirtRtrVrGrpStateread-createcurrentEnable or disable VRRP Vrgroup state
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.6ColumnvrrpNewCfgVirtRtrVrGrpDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.7ColumnvrrpNewCfgVirtRtrVrGrpBmapread-onlycurrentThe virtual routers added to this VRRP vrgroup. The selected virtual routers are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxx…
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.8ColumnvrrpNewCfgVirtRtrVrGrpPriorityread-createcurrentThe priority value to be used by the specified VRRP virtual routers.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.9ColumnvrrpNewCfgVirtRtrVrGrpTckIpIntfread-createcurrentEnable or disable tracking interfaces in vrgroup for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.10ColumnvrrpNewCfgVirtRtrVrGrpTckVlanPortread-createcurrentEnable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.11ColumnvrrpNewCfgVirtRtrVrGrpTckL4Portread-createcurrentEnable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when vi…
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.12ColumnvrrpNewCfgVirtRtrVrGrpTckRServerread-createcurrentEnable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when vi…
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.13ColumnvrrpNewCfgVirtRtrVrGrpTckHsrpread-createcurrentEnable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virt…
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.14ColumnvrrpNewCfgVirtRtrVrGrpTckHsrvread-createcurrentEnable or disable tracking HSRP advertisements by VLAN for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied w…
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.15ColumnvrrpNewCfgVirtRtrVrGrpTckVirtRtrNoread-createcurrentThe track virtual router for group.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.16ColumnvrrpNewCfgVirtRtrVrGrpAdverIntervalread-createcurrentThe advertisement interval for virtual router group.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.17ColumnvrrpNewCfgVirtRtrVrGrpPreemptionread-createcurrentEnable/Disable preemption for virtual router group.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.18ColumnvrrpNewCfgVirtRtrVrGrpSharingread-createcurrentEnable/Disable sharing for virtual router group.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.19ColumnvrrpNewCfgVirtRtrVrGrpOspfCostread-createcurrentOSPF Cost Adjustment
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.20ColumnvrrpNewCfgVirtRtrVrGrpTckSwExtread-createcurrentEnable or disable tracking Switch Extension availability for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckSwExtInc.
1.3.6.1.4.1.1872.2.5.3.1.6.13.1.21ColumnvrrpNewCfgVirtRtrVrGrpTckIslPortread-createcurrentInclude or exclude ISL ports in tracking.
1.3.6.1.4.1.1872.2.5.3.1.7NodearpCfg
1.3.6.1.4.1.1872.2.5.3.1.7.1ScalararpCurCfgReARPPeriodread-onlycurrentRe-ARP Period in seconds. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.7.2ScalararpNewCfgReARPPeriodread-writecurrentRe-ARP Period in seconds. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.8NodeipBootpCfg
1.3.6.1.4.1.1872.2.5.3.1.8.1ScalaripCurCfgBootpAddrread-onlycurrentThe IP address of BOOTP server. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.8.2ScalaripNewCfgBootpAddrread-writecurrentThe IP address of BOOTP server. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.8.3ScalaripCurCfgBootpAddr2read-onlycurrentThe IP address of second BOOTP server. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.8.4ScalaripNewCfgBootpAddr2read-writecurrentThe IP address of second BOOTP server. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.8.5ScalaripCurCfgBootpStateread-onlycurrentThe state of BOOTP relay. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.8.6ScalaripNewCfgBootpStateread-writecurrentThe state of BOOTP relay. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.8.7ScalaripCurCfgBootpPrsvPortread-onlycurrentEnable/Disable preserve source port by relay agent. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.8.8ScalaripNewCfgBootpPrsvPortread-writecurrentEnable/Disable preserve source port by relay agent, Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.9NodednsCfg
1.3.6.1.4.1.1872.2.5.3.1.9.1ScalardnsCurCfgPrimaryIpAddrread-onlycurrentThe DNS primary IP address in the current_configuration block.
1.3.6.1.4.1.1872.2.5.3.1.9.2ScalardnsNewCfgPrimaryIpAddrread-writecurrentThe DNS primary IP address in the new_configuration block.
1.3.6.1.4.1.1872.2.5.3.1.9.3ScalardnsCurCfgSecondaryIpAddrread-onlycurrentThe DNS secondary IP address in the current_configuration block.
1.3.6.1.4.1.1872.2.5.3.1.9.4ScalardnsNewCfgSecondaryIpAddrread-writecurrentThe DNS secondary IP address in the new_configuration block.
1.3.6.1.4.1.1872.2.5.3.1.9.5ScalardnsCurCfgDomainNameread-onlycurrentThe DNS doamin name in the current_configuration block.
1.3.6.1.4.1.1872.2.5.3.1.9.6ScalardnsNewCfgDomainNameread-writecurrentThe DNS doamin name in the new_configuration block.
1.3.6.1.4.1.1872.2.5.3.1.9.7ScalardnsCurCfgPrimaryIpv6Addrread-onlycurrentThe DNS primary IPv6 address in the current_configuration block.
1.3.6.1.4.1.1872.2.5.3.1.9.8ScalardnsNewCfgPrimaryIpv6Addrread-writecurrentThe DNS primary IPv6 address in the new_configuration block.
1.3.6.1.4.1.1872.2.5.3.1.9.9ScalardnsCurCfgSecondaryIpv6Addrread-onlycurrentThe DNS secondary IPv6 address in the current_configuration block.
1.3.6.1.4.1.1872.2.5.3.1.9.10ScalardnsNewCfgSecondaryIpv6Addrread-writecurrentThe DNS secondary IPv6 address in the new_configuration block.
1.3.6.1.4.1.1872.2.5.3.1.10NodeipNwfCfg
1.3.6.1.4.1.1872.2.5.3.1.10.1ScalaripNwfTableMaxread-onlycurrentThe maximum number of rows in the IP network filter table. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.10.2TableipCurCfgNwfTablenot-accessiblecurrentThe table of IP network filter configuration in the current_config. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.10.2.1RowipCurCfgNwfEntrynot-accessiblecurrentInformation about an IP network filter. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.10.2.1.1ColumnipCurCfgNwfIndexread-onlycurrentThe network filter number for which the NWF is related.
1.3.6.1.4.1.1872.2.5.3.1.10.2.1.2ColumnipCurCfgNwfAddrread-onlycurrentThe IP address of the network filter.
1.3.6.1.4.1.1872.2.5.3.1.10.2.1.3ColumnipCurCfgNwfMaskread-onlycurrentThe subnet mask of the network filter.
1.3.6.1.4.1.1872.2.5.3.1.10.2.1.4ColumnipCurCfgNwfStateread-onlycurrentEnable or disable the network filter.
1.3.6.1.4.1.1872.2.5.3.1.10.2.1.5ColumnipCurCfgNwfIpVerread-onlycurrentThe type of IP address Version
1.3.6.1.4.1.1872.2.5.3.1.10.2.1.6ColumnipCurCfgNwfIpv6Addrread-onlycurrentThe IPv6 address of the network filter.
1.3.6.1.4.1.1872.2.5.3.1.10.2.1.7ColumnipCurCfgNwfIpv6Maskread-onlycurrentThe IPv6 prefix mask of the network filter..
1.3.6.1.4.1.1872.2.5.3.1.10.3TableipNewCfgNwfTablenot-accessiblecurrentThe table of IP network filter configuration in the current_config. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.10.3.1RowipNewCfgNwfEntrynot-accessiblecurrentInformation about an IP network filter. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.10.3.1.1ColumnipNewCfgNwfIndexread-onlycurrentThe network filter number for which the NWF is related.
1.3.6.1.4.1.1872.2.5.3.1.10.3.1.2ColumnipNewCfgNwfAddrread-createcurrentThe IP address of the network filter.
1.3.6.1.4.1.1872.2.5.3.1.10.3.1.3ColumnipNewCfgNwfMaskread-createcurrentThe subnet mask of the network filter.
1.3.6.1.4.1.1872.2.5.3.1.10.3.1.4ColumnipNewCfgNwfStateread-createcurrentEnable or disable the network filter.
1.3.6.1.4.1.1872.2.5.3.1.10.3.1.5ColumnipNewCfgNwfDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.10.3.1.6ColumnipNewCfgNwfIpVerread-createcurrentThe type of IP address Version
1.3.6.1.4.1.1872.2.5.3.1.10.3.1.7ColumnipNewCfgNwfIpv6Addrread-createcurrentThe IPv6 address of the network filter.
1.3.6.1.4.1.1872.2.5.3.1.10.3.1.8ColumnipNewCfgNwfIpv6Maskread-createcurrentThe IPv6 prefix mask of the network filter..
1.3.6.1.4.1.1872.2.5.3.1.11NodeipRmapCfg
1.3.6.1.4.1.1872.2.5.3.1.11.1ScalaripRmapTableMaxread-onlycurrentThe maximum number of rows in the IP route map table. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.11.2TableipCurCfgRmapTablenot-accessiblecurrentThe table of IP route map configuration in the current_config.
1.3.6.1.4.1.1872.2.5.3.1.11.2.1RowipCurCfgRmapEntrynot-accessiblecurrentInformation about an IP route map.
1.3.6.1.4.1.1872.2.5.3.1.11.2.1.1ColumnipCurCfgRmapIndexread-onlycurrentThe route map number for which the RMAP is related.
1.3.6.1.4.1.1872.2.5.3.1.11.2.1.2ColumnipCurCfgRmapLpread-onlycurrentThe local-preference of the route map. 4294967295 means none
1.3.6.1.4.1.1872.2.5.3.1.11.2.1.3ColumnipCurCfgRmapMetricread-onlycurrentThe metric of the route map. 4294967295 means none
1.3.6.1.4.1.1872.2.5.3.1.11.2.1.4ColumnipCurCfgRmapPrecread-onlycurrentThe precedence of the route map.
1.3.6.1.4.1.1872.2.5.3.1.11.2.1.5ColumnipCurCfgRmapWeightread-onlycurrentThe weight of the route map. 65535 means none
1.3.6.1.4.1.1872.2.5.3.1.11.2.1.6ColumnipCurCfgRmapStateread-onlycurrentEnable or disable the route map.
1.3.6.1.4.1.1872.2.5.3.1.11.2.1.7ColumnipCurCfgRmapApread-onlycurrentThe as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is:<AS number> [<AS number>][ <AS number>]
1.3.6.1.4.1.1872.2.5.3.1.11.2.1.8ColumnipCurCfgRmapMetricTyperead-onlycurrentThe OSPF metric-type of the matched route.
1.3.6.1.4.1.1872.2.5.3.1.11.3TableipNewCfgRmapTablenot-accessiblecurrentThe table of IP route map configuration in the current_config.
1.3.6.1.4.1.1872.2.5.3.1.11.3.1RowipNewCfgRmapEntrynot-accessiblecurrentInformation about an IP route map.
1.3.6.1.4.1.1872.2.5.3.1.11.3.1.1ColumnipNewCfgRmapIndexread-onlycurrentThe route map number for which the RMAP is related.
1.3.6.1.4.1.1872.2.5.3.1.11.3.1.2ColumnipNewCfgRmapLpread-createcurrentThe local-preference of the route map. 4294967295 means none
1.3.6.1.4.1.1872.2.5.3.1.11.3.1.3ColumnipNewCfgRmapMetricread-createcurrentThe metric of the route map. 4294967295 means none
1.3.6.1.4.1.1872.2.5.3.1.11.3.1.4ColumnipNewCfgRmapPrecread-createcurrentThe precedence of the route map.
1.3.6.1.4.1.1872.2.5.3.1.11.3.1.5ColumnipNewCfgRmapWeightread-createcurrentThe weight of the route map. 65535 means none
1.3.6.1.4.1.1872.2.5.3.1.11.3.1.6ColumnipNewCfgRmapStateread-createcurrentEnable or disable the route map.
1.3.6.1.4.1.1872.2.5.3.1.11.3.1.7ColumnipNewCfgRmapApread-createcurrentThe as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is:<AS number> [<AS number>][ <AS number>]
1.3.6.1.4.1.1872.2.5.3.1.11.3.1.8ColumnipNewCfgRmapMetricTyperead-createcurrentThe OSPF metric-type of the matched route.
1.3.6.1.4.1.1872.2.5.3.1.11.3.1.9ColumnipNewCfgRmapDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.11.4ScalaripAlistTableMaxread-onlycurrentThe maximum number of rows in the IP route map table.
1.3.6.1.4.1.1872.2.5.3.1.11.5TableipCurCfgAlistTablenot-accessiblecurrentThe table of IP route map access list configuration in the current_config.
1.3.6.1.4.1.1872.2.5.3.1.11.5.1RowipCurCfgAlistEntrynot-accessiblecurrentInformation about an IP route map.
1.3.6.1.4.1.1872.2.5.3.1.11.5.1.1ColumnipCurCfgAlistRmapIndexread-onlycurrentThe route map number for which the RMAP is related.
1.3.6.1.4.1.1872.2.5.3.1.11.5.1.2ColumnipCurCfgAlistIndexread-onlycurrentThe access list number for which the access list is related.
1.3.6.1.4.1.1872.2.5.3.1.11.5.1.3ColumnipCurCfgAlistNwfread-onlycurrentThe network filter number of the route map access list. 0 means none
1.3.6.1.4.1.1872.2.5.3.1.11.5.1.4ColumnipCurCfgAlistMetricread-onlycurrentThe metric of the route map access list. 4294967295 means none
1.3.6.1.4.1.1872.2.5.3.1.11.5.1.5ColumnipCurCfgAlistActionread-onlycurrentAction of the route map access list.
1.3.6.1.4.1.1872.2.5.3.1.11.5.1.6ColumnipCurCfgAlistStateread-onlycurrentEnable or disable the route map access list.
1.3.6.1.4.1.1872.2.5.3.1.11.5.1.7ColumnipCurCfgAlistNwcread-onlycurrentThe network classifier of the route map access list. 'none' means no network class configured.
1.3.6.1.4.1.1872.2.5.3.1.11.6TableipNewCfgAlistTablenot-accessiblecurrentThe table of IP route map access list configuration in the current_config.
1.3.6.1.4.1.1872.2.5.3.1.11.6.1RowipNewCfgAlistEntrynot-accessiblecurrentInformation about an IP route map.
1.3.6.1.4.1.1872.2.5.3.1.11.6.1.1ColumnipNewCfgAlistRmapIndexread-onlycurrentThe route map number for which the RMAP is related.
1.3.6.1.4.1.1872.2.5.3.1.11.6.1.2ColumnipNewCfgAlistIndexread-onlycurrentThe access list number for which the access list is related.
1.3.6.1.4.1.1872.2.5.3.1.11.6.1.3ColumnipNewCfgAlistNwfread-createcurrentThe network filter number of the route map access list. 0 means none
1.3.6.1.4.1.1872.2.5.3.1.11.6.1.4ColumnipNewCfgAlistMetricread-createcurrentThe metric of the route map access list. 4294967295 means none
1.3.6.1.4.1.1872.2.5.3.1.11.6.1.5ColumnipNewCfgAlistActionread-createcurrentAction of the route map access list.
1.3.6.1.4.1.1872.2.5.3.1.11.6.1.6ColumnipNewCfgAlistStateread-createcurrentEnable or disable the route map access list.
1.3.6.1.4.1.1872.2.5.3.1.11.6.1.7ColumnipNewCfgAlistDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.11.6.1.8ColumnipNewCfgAlistNwcread-createcurrentThe network classifier of the route map access list. 'none' means no network class configured.
1.3.6.1.4.1.1872.2.5.3.1.11.6.1.9ColumnipNewCfgAlistNwTyperead-createcurrentIs the alist configured to network filter type or network class type.
1.3.6.1.4.1.1872.2.5.3.1.11.7ScalaripAspathTableMaxread-onlycurrentThe maximum number of rows in the IP route map table.
1.3.6.1.4.1.1872.2.5.3.1.11.8TableipCurCfgAspathTablenot-accessiblecurrentThe table of IP route map access path configuration.
1.3.6.1.4.1.1872.2.5.3.1.11.8.1RowipCurCfgAspathEntrynot-accessiblecurrentInformation about an IP route map.
1.3.6.1.4.1.1872.2.5.3.1.11.8.1.1ColumnipCurCfgAspathRmapIndexread-onlycurrentThe route map number for which the RMAP is related.
1.3.6.1.4.1.1872.2.5.3.1.11.8.1.2ColumnipCurCfgAspathIndexread-onlycurrentThe access path number for which the access list is related.
1.3.6.1.4.1.1872.2.5.3.1.11.8.1.3ColumnipCurCfgAspathASread-onlycurrentThe AS number of the route map access path. 0 means none
1.3.6.1.4.1.1872.2.5.3.1.11.8.1.4ColumnipCurCfgAspathActionread-onlycurrentAction of the route map access path.
1.3.6.1.4.1.1872.2.5.3.1.11.8.1.5ColumnipCurCfgAspathStateread-onlycurrentEnable or disable the route map access path.
1.3.6.1.4.1.1872.2.5.3.1.11.9TableipNewCfgAspathTablenot-accessiblecurrentThe table of IP route map access path configuration
1.3.6.1.4.1.1872.2.5.3.1.11.9.1RowipNewCfgAspathEntrynot-accessiblecurrentInformation about an IP route map.
1.3.6.1.4.1.1872.2.5.3.1.11.9.1.1ColumnipNewCfgAspathRmapIndexread-onlycurrentThe route map number for which the RMAP is related.
1.3.6.1.4.1.1872.2.5.3.1.11.9.1.2ColumnipNewCfgAspathIndexread-onlycurrentThe access path number for which the access list is related.
1.3.6.1.4.1.1872.2.5.3.1.11.9.1.3ColumnipNewCfgAspathASread-createcurrentThe AS number of the route map access path. 0 means none
1.3.6.1.4.1.1872.2.5.3.1.11.9.1.4ColumnipNewCfgAspathActionread-createcurrentAction of the route map access path.
1.3.6.1.4.1.1872.2.5.3.1.11.9.1.5ColumnipNewCfgAspathStateread-createcurrentEnable or disable the route map access path.
1.3.6.1.4.1.1872.2.5.3.1.11.9.1.6ColumnipNewCfgAspathDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.12NodebgpCfg
1.3.6.1.4.1.1872.2.5.3.1.12.1NodebgpGeneral
1.3.6.1.4.1.1872.2.5.3.1.12.1.1ScalarbgpCurCfgStateread-onlycurrentBGP global state.
1.3.6.1.4.1.1872.2.5.3.1.12.1.2ScalarbgpNewCfgStateread-writecurrentGlobally turn BGP on or off.
1.3.6.1.4.1.1872.2.5.3.1.12.1.3ScalarbgpCurCfgLocalPrefread-onlycurrentLocal preference value.
1.3.6.1.4.1.1872.2.5.3.1.12.1.4ScalarbgpNewCfgLocalPrefread-writecurrentLocal Preference value.
1.3.6.1.4.1.1872.2.5.3.1.12.1.5ScalarbgpCurCfgMaxASPathread-onlycurrentMaximum AS Path Length.
1.3.6.1.4.1.1872.2.5.3.1.12.1.6ScalarbgpNewCfgMaxASPathread-writecurrentMaximum AS Path Length.
1.3.6.1.4.1.1872.2.5.3.1.12.1.7ScalarbgpCurCfgASNumberread-onlycurrentCurrent autonomous system number.
1.3.6.1.4.1.1872.2.5.3.1.12.1.8ScalarbgpNewCfgASNumberread-writecurrentNew autonomous system number.Enter 0 to delete this number.
1.3.6.1.4.1.1872.2.5.3.1.12.1.9ScalarbgpCurCfgStopVipAdvread-onlycurrentStop VIP advertisement.
1.3.6.1.4.1.1872.2.5.3.1.12.1.10ScalarbgpNewCfgStopVipAdvread-writecurrentStop VIP advertisement.
1.3.6.1.4.1.1872.2.5.3.1.12.1.11ScalarbgpCurCfgAdvFipread-onlycurrentAdvertise floating IP state.
1.3.6.1.4.1.1872.2.5.3.1.12.1.12ScalarbgpNewCfgAdvFipread-writecurrentAdvertising floating IP : on or off.
1.3.6.1.4.1.1872.2.5.3.1.12.2ScalarbgpPeerTableMaxread-onlycurrentThe maximum number of rows in the BGP peer table.
1.3.6.1.4.1.1872.2.5.3.1.12.3TablebgpCurCfgPeerTablenot-accessiblecurrentThe table of BGP peer configuration in the current_config.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1RowbgpCurCfgPeerEntrynot-accessiblecurrentInformation about a BGP peer.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.1ColumnbgpCurCfgPeerIndexread-onlycurrentThe BGP peer number for which the BGP peer table is related.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.2ColumnbgpCurCfgPeerRemoteAddrread-onlycurrentThe remote IP address of the BGP peer.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.3ColumnbgpCurCfgPeerRemoteAsread-onlycurrentThe remote AS number of the BGP peer. 0 means none
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.4ColumnbgpCurCfgPeerTtlread-onlycurrentThe time-to-live value of the BGP peer IP datagram.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.5ColumnbgpCurCfgPeerStateread-onlycurrentEnable or disable the peer.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.10ColumnbgpCurCfgPeerMetricread-onlycurrentThe metric value of the BGP peer. A value of '0' means none
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.11ColumnbgpCurCfgPeerDefaultActionread-onlycurrentThe value of default route action.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.12ColumnbgpCurCfgPeerOspfStateread-onlycurrentEnable or disable advertising OSPF routes.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.13ColumnbgpCurCfgPeerFixedStateread-onlycurrentEnable or disable advertising fixed routes.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.14ColumnbgpCurCfgPeerStaticStateread-onlycurrentEnable or disable advertising static routes.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.15ColumnbgpCurCfgPeerVipStateread-onlycurrentEnable or disable VIP static routes.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.16ColumnbgpCurCfgPeerInRmapListread-onlycurrentThe route maps present in the in route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .…
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.17ColumnbgpCurCfgPeerOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.18ColumnbgpCurCfgPeerHoldTimeread-onlycurrentThe Hold Time value of the BGP peer IP datagram.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.19ColumnbgpCurCfgPeerKeepAliveread-onlycurrentThe KeepAlive Time value of the BGP peer IP datagram.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.20ColumnbgpCurCfgPeerMinTimeread-onlycurrentThe min time between advertisements of the BGP peer IP datagram.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.21ColumnbgpCurCfgPeerConRetryread-onlycurrentThe Connect Retry Timer Interval value of the BGP peer IP datagram.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.22ColumnbgpCurCfgPeerMinASread-onlycurrentThe minimum time between route originations of the BGP peer IP datagram.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.23ColumnbgpCurCfgPeerRipStateread-onlycurrentEnable or disable RIP static routes.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.24ColumnbgpCurCfgPeerDenyStateread-onlycurrentEnable or disable DENY route advertisement.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.25ColumnbgpCurCfgPeerNextHopread-onlycurrentThe value will be used by BGP peer as nexthop.
1.3.6.1.4.1.1872.2.5.3.1.12.3.1.26ColumnbgpCurCfgPeerBfdStateread-onlycurrentTurn BFD on/off for the peer.
1.3.6.1.4.1.1872.2.5.3.1.12.4TablebgpNewCfgPeerTablenot-accessiblecurrentThe table of BGP peer configuration in the current_config.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1RowbgpNewCfgPeerEntrynot-accessiblecurrentInformation about a BGP peer.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.1ColumnbgpNewCfgPeerIndexread-onlycurrentThe BGP peer number for which the BGP peer table is related.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.2ColumnbgpNewCfgPeerRemoteAddrread-createcurrentThe remote IP address of the BGP peer.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.3ColumnbgpNewCfgPeerRemoteAsread-createcurrentThe remote AS number of the BGP peer. 0 means none
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.4ColumnbgpNewCfgPeerTtlread-createcurrentThe time-to-live value of the BGP peer IP datagram.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.5ColumnbgpNewCfgPeerStateread-createcurrentEnable or disable the peer.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.6ColumnbgpNewCfgPeerDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.10ColumnbgpNewCfgPeerMetricread-createcurrentThe metric value of the BGP peer. A value of '0' means none
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.11ColumnbgpNewCfgPeerDefaultActionread-createcurrentThe value of default route action.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.12ColumnbgpNewCfgPeerOspfStateread-createcurrentEnable or disable advertising OSPF routes.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.13ColumnbgpNewCfgPeerFixedStateread-createcurrentEnable or disable advertising fixed routes.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.14ColumnbgpNewCfgPeerStaticStateread-createcurrentEnable or disable advertising static routes.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.15ColumnbgpNewCfgPeerVipStateread-createcurrentEnable or disable VIP static routes.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.16ColumnbgpNewCfgPeerInRmapListread-onlycurrentThe route maps present in the in route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .…
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.17ColumnbgpNewCfgPeerOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.18ColumnbgpNewCfgPeerAddInRmapread-createcurrentThe route map to be add into in-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.19ColumnbgpNewCfgPeerAddOutRmapread-createcurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.20ColumnbgpNewCfgPeerRemoveInRmapread-createcurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.21ColumnbgpNewCfgPeerRemoveOutRmapread-createcurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.22ColumnbgpNewCfgPeerHoldTimeread-createcurrentThe Hold Time value of the BGP peer IP datagram.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.23ColumnbgpNewCfgPeerKeepAliveread-createcurrentThe KeepAlive Time value of the BGP peer IP datagram.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.24ColumnbgpNewCfgPeerMinTimeread-createcurrentThe mininum time between advertisements of the BGP peer IP datagram.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.25ColumnbgpNewCfgPeerConRetryread-createcurrentThe Connect Retry Timer Interval value of the BGP peer IP datagram.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.26ColumnbgpNewCfgPeerMinASread-createcurrentThe minimum time between route originations of the BGP peer IP datagram.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.27ColumnbgpNewCfgPeerRipStateread-createcurrentEnable or disable RIP static routes.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.28ColumnbgpNewCfgPeerDenyStateread-createcurrentEnable or disable DENY route advertisement.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.29ColumnbgpNewCfgPeerNextHopread-createcurrentThe value will be used by BGP peer as nexthop.
1.3.6.1.4.1.1872.2.5.3.1.12.4.1.30ColumnbgpNewCfgPeerBfdStateread-createcurrentTurn BFD on/off for the peer.
1.3.6.1.4.1.1872.2.5.3.1.12.5ScalarbgpAggrTableMaxread-onlycurrentThe maximum number of rows in the BGP aggregation table.
1.3.6.1.4.1.1872.2.5.3.1.12.6TablebgpCurCfgAggrTablenot-accessiblecurrentThe table of BGP aggregation configuration.
1.3.6.1.4.1.1872.2.5.3.1.12.6.1RowbgpCurCfgAggrEntrynot-accessiblecurrentInformation about a BGP aggregation.
1.3.6.1.4.1.1872.2.5.3.1.12.6.1.1ColumnbgpCurCfgAggrIndexread-onlycurrentThe aggregation number for which the BGP aggregation is related.
1.3.6.1.4.1.1872.2.5.3.1.12.6.1.2ColumnbgpCurCfgAggrAddrread-onlycurrentThe IP address of the BGP aggregation.
1.3.6.1.4.1.1872.2.5.3.1.12.6.1.3ColumnbgpCurCfgAggrMaskread-onlycurrentThe subnet mask of the BGP aggregation.
1.3.6.1.4.1.1872.2.5.3.1.12.6.1.4ColumnbgpCurCfgAggrStateread-onlycurrentEnable or disable the BGP aggregation.
1.3.6.1.4.1.1872.2.5.3.1.12.7TablebgpNewCfgAggrTablenot-accessiblecurrentThe table of BGP aggregation configuration.
1.3.6.1.4.1.1872.2.5.3.1.12.7.1RowbgpNewCfgAggrEntrynot-accessiblecurrentInformation about an BGP aggregation.
1.3.6.1.4.1.1872.2.5.3.1.12.7.1.1ColumnbgpNewCfgAggrIndexread-onlycurrentThe aggregation number for which the BGP aggregation is related.
1.3.6.1.4.1.1872.2.5.3.1.12.7.1.2ColumnbgpNewCfgAggrAddrread-createcurrentThe IP address of the BGP aggregation.
1.3.6.1.4.1.1872.2.5.3.1.12.7.1.3ColumnbgpNewCfgAggrMaskread-createcurrentThe subnet mask of the BGP aggregation.
1.3.6.1.4.1.1872.2.5.3.1.12.7.1.4ColumnbgpNewCfgAggrStateread-createcurrentEnable or disable the BGP aggregation.
1.3.6.1.4.1.1872.2.5.3.1.12.7.1.5ColumnbgpNewCfgAggrDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.13NodeospfCfg
1.3.6.1.4.1.1872.2.5.3.1.13.1NodeospfGeneral
1.3.6.1.4.1.1872.2.5.3.1.13.1.1ScalarospfCurCfgDefaultRouteMetricread-onlycurrentSpecify the metric to be assigned.
1.3.6.1.4.1.1872.2.5.3.1.13.1.2ScalarospfNewCfgDefaultRouteMetricread-writecurrentSpecify the metric to be assigned.
1.3.6.1.4.1.1872.2.5.3.1.13.1.3ScalarospfCurCfgDefaultRouteMetricTyperead-onlycurrentSpecify the AS External metric type to be assigned.
1.3.6.1.4.1.1872.2.5.3.1.13.1.4ScalarospfNewCfgDefaultRouteMetricTyperead-writecurrentSpecify the AS External metric type to be assigned.
1.3.6.1.4.1.1872.2.5.3.1.13.1.5ScalarospfIntfTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Interface table.
1.3.6.1.4.1.1872.2.5.3.1.13.1.6ScalarospfAreaTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Area table.
1.3.6.1.4.1.1872.2.5.3.1.13.1.7ScalarospfRangeTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Range table.
1.3.6.1.4.1.1872.2.5.3.1.13.1.8ScalarospfVirtIntfTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Virtual Interface table.
1.3.6.1.4.1.1872.2.5.3.1.13.1.9ScalarospfHostTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Host table.
1.3.6.1.4.1.1872.2.5.3.1.13.1.10ScalarospfCurCfgStateread-onlycurrentOSPF global state.
1.3.6.1.4.1.1872.2.5.3.1.13.1.11ScalarospfNewCfgStateread-writecurrentGlobally turn OSPF on or off.
1.3.6.1.4.1.1872.2.5.3.1.13.1.12ScalarospfCurCfgLsdbread-onlycurrentSpecify the LSDB limit for external LSA.
1.3.6.1.4.1.1872.2.5.3.1.13.1.13ScalarospfNewCfgLsdbread-writecurrentSpecify the LSDB limit for external LSA.
1.3.6.1.4.1.1872.2.5.3.1.13.2TableospfCurCfgAreaTablenot-accessiblecurrentThe table of OSPF Area configuration in the current_config.
1.3.6.1.4.1.1872.2.5.3.1.13.2.1RowospfCurCfgAreaEntrynot-accessiblecurrentInformation about a OSPF area.
1.3.6.1.4.1.1872.2.5.3.1.13.2.1.1ColumnospfCurCfgAreaIndexread-onlycurrentThe OSPF area number for which the OSPF area table is related.
1.3.6.1.4.1.1872.2.5.3.1.13.2.1.2ColumnospfCurCfgAreaIdread-onlycurrentThe IP Address of the OSPF area.
1.3.6.1.4.1.1872.2.5.3.1.13.2.1.3ColumnospfCurCfgAreaSpfIntervalread-onlycurrentThe SPF interval for the OSPF area.
1.3.6.1.4.1.1872.2.5.3.1.13.2.1.4ColumnospfCurCfgAreaAuthTyperead-onlycurrentType of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
1.3.6.1.4.1.1872.2.5.3.1.13.2.1.5ColumnospfCurCfgAreaTyperead-onlycurrentType of area being used.
1.3.6.1.4.1.1872.2.5.3.1.13.2.1.6ColumnospfCurCfgAreaMetricread-onlycurrentThe Stub area metric for the OSPF area.
1.3.6.1.4.1.1872.2.5.3.1.13.2.1.7ColumnospfCurCfgAreaStateread-onlycurrentGlobally turn OSPF on or off.
1.3.6.1.4.1.1872.2.5.3.1.13.3TableospfNewCfgAreaTablenot-accessiblecurrentThe table of OSPF Area configuration in the new_config.
1.3.6.1.4.1.1872.2.5.3.1.13.3.1RowospfNewCfgAreaEntrynot-accessiblecurrentInformation about a OSPF area.
1.3.6.1.4.1.1872.2.5.3.1.13.3.1.1ColumnospfNewCfgAreaIndexread-onlycurrentThe OSPF area number for which the OSPF area table is related.
1.3.6.1.4.1.1872.2.5.3.1.13.3.1.2ColumnospfNewCfgAreaIdread-onlycurrentThe IP Address of the OSPF area.
1.3.6.1.4.1.1872.2.5.3.1.13.3.1.3ColumnospfNewCfgAreaSpfIntervalread-createcurrentThe SPF interval for the OSPF area.
1.3.6.1.4.1.1872.2.5.3.1.13.3.1.4ColumnospfNewCfgAreaAuthTyperead-createcurrentType of authentication being used. none(1) - no authentication password(2) - use password. md5(3) - use MD5 authentication.
1.3.6.1.4.1.1872.2.5.3.1.13.3.1.5ColumnospfNewCfgAreaTyperead-createcurrentType of area being used.
1.3.6.1.4.1.1872.2.5.3.1.13.3.1.6ColumnospfNewCfgAreaMetricread-createcurrentThe Stub area metric for the OSPF area.
1.3.6.1.4.1.1872.2.5.3.1.13.3.1.7ColumnospfNewCfgAreaStateread-createcurrentEnable or disable OSPF Area.
1.3.6.1.4.1.1872.2.5.3.1.13.3.1.8ColumnospfNewCfgAreaDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.13.4NodeospfRouteRedistribution
1.3.6.1.4.1.1872.2.5.3.1.13.4.1NodeospfRedistributeStatic
1.3.6.1.4.1.1872.2.5.3.1.13.4.1.1ScalarospfCurCfgStaticMetricread-onlycurrentThe metric to be assigned to static routes. A value of 0 indicates none.
1.3.6.1.4.1.1872.2.5.3.1.13.4.1.2ScalarospfNewCfgStaticMetricread-writecurrentThe metric to be assigned to static routes. A value of 0 indicates none.
1.3.6.1.4.1.1872.2.5.3.1.13.4.1.3ScalarospfCurCfgStaticMetricTyperead-onlycurrentThe AS External metric type for static routes.
1.3.6.1.4.1.1872.2.5.3.1.13.4.1.4ScalarospfNewCfgStaticMetricTyperead-writecurrentThe AS External metric type for static routes.
1.3.6.1.4.1.1872.2.5.3.1.13.4.1.5ScalarospfCurCfgStaticOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.13.4.1.6ScalarospfNewCfgStaticOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.13.4.1.7ScalarospfNewCfgStaticAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.13.4.1.8ScalarospfNewCfgStaticRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.13.4.2NodeospfRedistributeEbgp
1.3.6.1.4.1.1872.2.5.3.1.13.4.2.1ScalarospfCurCfgEbgpMetricread-onlycurrentThe export metric to be assigned to External BGP routes. A value of 0 indicates none.
1.3.6.1.4.1.1872.2.5.3.1.13.4.2.2ScalarospfNewCfgEbgpMetricread-writecurrentThe export metric to be assigned to External BGP routes. A value of 0 indicates none.
1.3.6.1.4.1.1872.2.5.3.1.13.4.2.3ScalarospfCurCfgEbgpMetricTyperead-onlycurrentThe AS External metric type for External BGP routes.
1.3.6.1.4.1.1872.2.5.3.1.13.4.2.4ScalarospfNewCfgEbgpMetricTyperead-writecurrentThe AS External metric type for External BGP routes.
1.3.6.1.4.1.1872.2.5.3.1.13.4.2.5ScalarospfCurCfgEbgpOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.13.4.2.6ScalarospfNewCfgEbgpOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.13.4.2.7ScalarospfNewCfgEbgpAddOutRmapread-writecurrentThe route map to be added into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.13.4.2.8ScalarospfNewCfgEbgpRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.13.4.3NodeospfRedistributeIbgp
1.3.6.1.4.1.1872.2.5.3.1.13.4.3.1ScalarospfCurCfgIbgpMetricread-onlycurrentThe export metric for Internal BGP routes. A value of 0 indicates none.
1.3.6.1.4.1.1872.2.5.3.1.13.4.3.2ScalarospfNewCfgIbgpMetricread-writecurrentThe export metric for Internal BGP routes. A value of 0 indicates none.
1.3.6.1.4.1.1872.2.5.3.1.13.4.3.3ScalarospfCurCfgIbgpMetricTyperead-onlycurrentThe AS External metric type for Internal BGP routes.
1.3.6.1.4.1.1872.2.5.3.1.13.4.3.4ScalarospfNewCfgIbgpMetricTyperead-writecurrentThe AS External metric type for Internal BGP routes.
1.3.6.1.4.1.1872.2.5.3.1.13.4.3.5ScalarospfCurCfgIbgpOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.13.4.3.6ScalarospfNewCfgIbgpOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.13.4.3.7ScalarospfNewCfgIbgpAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.13.4.3.8ScalarospfNewCfgIbgpRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.13.4.4NodeospfRedistributeFixed
1.3.6.1.4.1.1872.2.5.3.1.13.4.4.1ScalarospfCurCfgFixedMetricread-onlycurrentThe export metric for fixed routes. A value of 0 indicates none
1.3.6.1.4.1.1872.2.5.3.1.13.4.4.2ScalarospfNewCfgFixedMetricread-writecurrentThe export metric for fixed routes. A value of 0 indicates none
1.3.6.1.4.1.1872.2.5.3.1.13.4.4.3ScalarospfCurCfgFixedMetricTyperead-onlycurrentThe AS External metric type for fixed routes.
1.3.6.1.4.1.1872.2.5.3.1.13.4.4.4ScalarospfNewCfgFixedMetricTyperead-writecurrentThe AS External metric type for fixed routes.
1.3.6.1.4.1.1872.2.5.3.1.13.4.4.5ScalarospfCurCfgFixedOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.13.4.4.6ScalarospfNewCfgFixedOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.13.4.4.7ScalarospfNewCfgFixedAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.13.4.4.8ScalarospfNewCfgFixedRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.13.4.5NodeospfRedistributeRip
1.3.6.1.4.1.1872.2.5.3.1.13.4.5.1ScalarospfCurCfgRipMetricread-onlycurrentThe export metric for RIP routes. A value of 0 indicates none
1.3.6.1.4.1.1872.2.5.3.1.13.4.5.2ScalarospfNewCfgRipMetricread-writecurrentThe export metric for RIP routes. A value of 0 indicates none
1.3.6.1.4.1.1872.2.5.3.1.13.4.5.3ScalarospfCurCfgRipMetricTyperead-onlycurrentThe AS External metric type for RIP routes.
1.3.6.1.4.1.1872.2.5.3.1.13.4.5.4ScalarospfNewCfgRipMetricTyperead-writecurrentThe AS External metric type for RIP routes.
1.3.6.1.4.1.1872.2.5.3.1.13.4.5.5ScalarospfCurCfgRipOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.13.4.5.6ScalarospfNewCfgRipOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.13.4.5.7ScalarospfNewCfgRipAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.13.4.5.8ScalarospfNewCfgRipRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.13.5TableospfCurCfgMdkeyTablenot-accessiblecurrentThe table of OSPF MD5 keys in the current_config.
1.3.6.1.4.1.1872.2.5.3.1.13.5.1RowospfCurCfgMdkeyEntrynot-accessiblecurrentInformation about an OSPF MD keys table.
1.3.6.1.4.1.1872.2.5.3.1.13.5.1.1ColumnospfCurCfgMdkeyIndexread-onlycurrentThe OSPF MD5 Key number for which the OSPF MdKey table is related.
1.3.6.1.4.1.1872.2.5.3.1.13.5.1.2ColumnospfCurCfgMdkeyKeyread-onlycurrentThe character string representing the MD5 Key.
1.3.6.1.4.1.1872.2.5.3.1.13.6TableospfNewCfgMdkeyTablenot-accessiblecurrentThe table of OSPF MD5 keys in the new_config.
1.3.6.1.4.1.1872.2.5.3.1.13.6.1RowospfNewCfgMdkeyEntrynot-accessiblecurrentInformation about an OSPF MD keys table.
1.3.6.1.4.1.1872.2.5.3.1.13.6.1.1ColumnospfNewCfgMdkeyIndexread-onlycurrentThe OSPF MD5 Key number for which the OSPF MdKey table is related.
1.3.6.1.4.1.1872.2.5.3.1.13.6.1.2ColumnospfNewCfgMdkeyKeyread-createcurrentThe character string representing the MD5 Key.
1.3.6.1.4.1.1872.2.5.3.1.13.6.1.3ColumnospfNewCfgMdkeyDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.13.7TableospfCurCfgIntfTablenot-accessiblecurrentThe table of OSPF Interface configuration in the current_config.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1RowospfCurCfgIntfEntrynot-accessiblecurrentInformation about an OSPF Interface.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1.1ColumnospfCurCfgIntfIndexread-onlycurrentThe OSPF Interface number for which the OSPF Interface table is related.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1.2ColumnospfCurCfgIntfIdread-onlycurrentThe IP Address of the OSPF interface.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1.3ColumnospfCurCfgIntfMdkeyread-onlycurrentThe MD5 key for the OSPF interface 0 (none) no MD5 authentication.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1.4ColumnospfCurCfgIntfAreaIdread-onlycurrentSpecify Area Index.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1.5ColumnospfCurCfgIntfPriorityread-onlycurrentSpecify interface router priority.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1.6ColumnospfCurCfgIntfCostread-onlycurrentInterface Cost.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1.7ColumnospfCurCfgIntfHelloread-onlycurrentHello interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1.8ColumnospfCurCfgIntfDeadread-onlycurrentDead interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1.9ColumnospfCurCfgIntfTransitread-onlycurrentTransit delay in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1.10ColumnospfCurCfgIntfRetransread-onlycurrentRetransmit interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1.11ColumnospfCurCfgIntfKeyread-onlycurrentSpecify Authentication Key.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1.12ColumnospfCurCfgIntfStateread-onlycurrentEnable or disable OSPF Interface.
1.3.6.1.4.1.1872.2.5.3.1.13.7.1.13ColumnospfCurCfgIntfBfdread-onlycurrentTurn BFD on/off for the OSPF interface.
1.3.6.1.4.1.1872.2.5.3.1.13.8TableospfNewCfgIntfTablenot-accessiblecurrentThe table of OSPF Interface configuration in the new_config.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1RowospfNewCfgIntfEntrynot-accessiblecurrentInformation about an OSPF Interface.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.1ColumnospfNewCfgIntfIndexread-onlycurrentThe OSPF Interface number for which the OSPF Interface table is related.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.2ColumnospfNewCfgIntfIdread-onlycurrentThe IP Address of the OSPF interface.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.3ColumnospfNewCfgIntfMdkeyread-createcurrentThe MD5 key for the OSPF interface 0 (none) no MD5 authentication.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.4ColumnospfNewCfgIntfAreaIdread-createcurrentSpecify Area Index.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.5ColumnospfNewCfgIntfPriorityread-createcurrentSpecify interface router priority.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.6ColumnospfNewCfgIntfCostread-createcurrentSpecify interface cost.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.7ColumnospfNewCfgIntfHelloread-createcurrentHello interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.8ColumnospfNewCfgIntfDeadread-createcurrentDead interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.9ColumnospfNewCfgIntfTransitread-createcurrentTransit delay in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.10ColumnospfNewCfgIntfRetransread-createcurrentRetransmit interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.11ColumnospfNewCfgIntfKeyread-createcurrentSpecify Authentication Key.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.12ColumnospfNewCfgIntfStateread-createcurrentEnable or disable OSPF Interface.
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.13ColumnospfNewCfgIntfDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.13.8.1.14ColumnospfNewCfgIntfBfdread-createcurrentTurn BFD on/off for the OSPF interface.
1.3.6.1.4.1.1872.2.5.3.1.13.9TableospfCurCfgVirtIntfTablenot-accessiblecurrentThe table of OSPF Virtual Interface configuration in the current configuration.
1.3.6.1.4.1.1872.2.5.3.1.13.9.1RowospfCurCfgVirtIntfEntrynot-accessiblecurrentInformation about an OSPF virtual Interface.
1.3.6.1.4.1.1872.2.5.3.1.13.9.1.1ColumnospfCurCfgVirtIntfIndexread-onlycurrentThe OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
1.3.6.1.4.1.1872.2.5.3.1.13.9.1.2ColumnospfCurCfgVirtIntfAreaIdread-onlycurrentThe OSPF Area Id.
1.3.6.1.4.1.1872.2.5.3.1.13.9.1.3ColumnospfCurCfgVirtIntfNbrread-onlycurrentThe IP Address of the OSPF neighbour for this virtual interface.
1.3.6.1.4.1.1872.2.5.3.1.13.9.1.4ColumnospfCurCfgVirtIntfMdkeyread-onlycurrentThe MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
1.3.6.1.4.1.1872.2.5.3.1.13.9.1.5ColumnospfCurCfgVirtIntfHelloread-onlycurrentHello interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.9.1.6ColumnospfCurCfgVirtIntfDeadread-onlycurrentDead interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.9.1.7ColumnospfCurCfgVirtIntfTransitread-onlycurrentTransit delay in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.9.1.8ColumnospfCurCfgVirtIntfRetransread-onlycurrentRetransmit interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.9.1.9ColumnospfCurCfgVirtIntfKeyread-onlycurrentSpecify Authentication Key.
1.3.6.1.4.1.1872.2.5.3.1.13.9.1.10ColumnospfCurCfgVirtIntfStateread-onlycurrentEnable or disable OSPF Interface.
1.3.6.1.4.1.1872.2.5.3.1.13.10TableospfNewCfgVirtIntfTablenot-accessiblecurrentThe table of OSPF Virtual Interface configuration in the new_config.
1.3.6.1.4.1.1872.2.5.3.1.13.10.1RowospfNewCfgVirtIntfEntrynot-accessiblecurrentInformation about an OSPF virtual Interface.
1.3.6.1.4.1.1872.2.5.3.1.13.10.1.1ColumnospfNewCfgVirtIntfIndexread-onlycurrentThe OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
1.3.6.1.4.1.1872.2.5.3.1.13.10.1.2ColumnospfNewCfgVirtIntfAreaIdread-createcurrentThe OSPF Area Id.
1.3.6.1.4.1.1872.2.5.3.1.13.10.1.3ColumnospfNewCfgVirtIntfNbrread-createcurrentThe IP Address of the OSPF neighbour for this virtual interface.
1.3.6.1.4.1.1872.2.5.3.1.13.10.1.4ColumnospfNewCfgVirtIntfMdkeyread-createcurrentThe MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
1.3.6.1.4.1.1872.2.5.3.1.13.10.1.5ColumnospfNewCfgVirtIntfHelloread-createcurrentHello interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.10.1.6ColumnospfNewCfgVirtIntfDeadread-createcurrentDead interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.10.1.7ColumnospfNewCfgVirtIntfTransitread-createcurrentTransit delay in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.10.1.8ColumnospfNewCfgVirtIntfRetransread-createcurrentRetransmit interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.13.10.1.9ColumnospfNewCfgVirtIntfKeyread-createcurrentSpecify Authentication Key. Enter string of 8 characters or None.
1.3.6.1.4.1.1872.2.5.3.1.13.10.1.10ColumnospfNewCfgVirtIntfStateread-createcurrentEnable or disable OSPF Interface.
1.3.6.1.4.1.1872.2.5.3.1.13.10.1.11ColumnospfNewCfgVirtIntfDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.13.11ScalarospfMdkeyTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Mdkey table.
1.3.6.1.4.1.1872.2.5.3.1.13.12TableospfCurCfgHostTablenot-accessiblecurrentThe table of OSPF Host configuration.
1.3.6.1.4.1.1872.2.5.3.1.13.12.1RowospfCurCfgHostEntrynot-accessiblecurrentInformation about a OSPF host.
1.3.6.1.4.1.1872.2.5.3.1.13.12.1.1ColumnospfCurCfgHostIndexread-onlycurrentThe OSPF host number for which the OSPF host table is related.
1.3.6.1.4.1.1872.2.5.3.1.13.12.1.2ColumnospfCurCfgHostIpAddrread-onlycurrentThe IP Address of the OSPF host.
1.3.6.1.4.1.1872.2.5.3.1.13.12.1.3ColumnospfCurCfgHostAreaIndexread-onlycurrentThe area index.
1.3.6.1.4.1.1872.2.5.3.1.13.12.1.4ColumnospfCurCfgHostCostread-onlycurrentCost of the host entry.
1.3.6.1.4.1.1872.2.5.3.1.13.12.1.5ColumnospfCurCfgHostStateread-onlycurrentEnable or disable Host Entry.
1.3.6.1.4.1.1872.2.5.3.1.13.13TableospfNewCfgHostTablenot-accessiblecurrentThe table of OSPF Host configuration.
1.3.6.1.4.1.1872.2.5.3.1.13.13.1RowospfNewCfgHostEntrynot-accessiblecurrentInformation about a OSPF host.
1.3.6.1.4.1.1872.2.5.3.1.13.13.1.1ColumnospfNewCfgHostIndexread-onlycurrentThe OSPF host number for which the OSPF host table is related.
1.3.6.1.4.1.1872.2.5.3.1.13.13.1.2ColumnospfNewCfgHostIpAddrread-createcurrentThe IP Address of the OSPF host.
1.3.6.1.4.1.1872.2.5.3.1.13.13.1.3ColumnospfNewCfgHostAreaIndexread-createcurrentThe OSPF area index.
1.3.6.1.4.1.1872.2.5.3.1.13.13.1.4ColumnospfNewCfgHostCostread-createcurrentCost of the host entry.
1.3.6.1.4.1.1872.2.5.3.1.13.13.1.5ColumnospfNewCfgHostStateread-createcurrentEnable or disable Host Entry.
1.3.6.1.4.1.1872.2.5.3.1.13.13.1.6ColumnospfNewCfgHostDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.13.14TableospfCurCfgRangeTablenot-accessiblecurrentThe table of OSPF summary range in the current configuration.
1.3.6.1.4.1.1872.2.5.3.1.13.14.1RowospfCurCfgRangeEntrynot-accessiblecurrentInformation about an OSPF summary range.
1.3.6.1.4.1.1872.2.5.3.1.13.14.1.1ColumnospfCurCfgRangeIndexread-onlycurrentThe range number for which the OSPF summary range table is related.
1.3.6.1.4.1.1872.2.5.3.1.13.14.1.2ColumnospfCurCfgRangeAddrread-onlycurrentThe IP Address of the range.
1.3.6.1.4.1.1872.2.5.3.1.13.14.1.3ColumnospfCurCfgRangeMaskread-onlycurrentThe mask of the range.
1.3.6.1.4.1.1872.2.5.3.1.13.14.1.4ColumnospfCurCfgRangeAreaIndexread-onlycurrentThe area index.
1.3.6.1.4.1.1872.2.5.3.1.13.14.1.5ColumnospfCurCfgRangeHideStateread-onlycurrentThe state of the hide range.
1.3.6.1.4.1.1872.2.5.3.1.13.14.1.6ColumnospfCurCfgRangeStateread-onlycurrentThe state of the range.
1.3.6.1.4.1.1872.2.5.3.1.13.15TableospfNewCfgRangeTablenot-accessiblecurrentThe table of OSPF summary range in the new configuration.
1.3.6.1.4.1.1872.2.5.3.1.13.15.1RowospfNewCfgRangeEntrynot-accessiblecurrentInformation about an OSPF summary range.
1.3.6.1.4.1.1872.2.5.3.1.13.15.1.1ColumnospfNewCfgRangeIndexread-onlycurrentThe range number for which the OSPF summary range table is related.
1.3.6.1.4.1.1872.2.5.3.1.13.15.1.2ColumnospfNewCfgRangeAddrread-createcurrentThe IP Address of the range.
1.3.6.1.4.1.1872.2.5.3.1.13.15.1.3ColumnospfNewCfgRangeMaskread-createcurrentThe mask of the range.
1.3.6.1.4.1.1872.2.5.3.1.13.15.1.4ColumnospfNewCfgRangeAreaIndexread-createcurrentThe area index.
1.3.6.1.4.1.1872.2.5.3.1.13.15.1.5ColumnospfNewCfgRangeHideStateread-createcurrentThe state of the hide range.
1.3.6.1.4.1.1872.2.5.3.1.13.15.1.6ColumnospfNewCfgRangeStateread-createcurrentThe state of the range.
1.3.6.1.4.1.1872.2.5.3.1.13.15.1.7ColumnospfNewCfgRangeDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.13.16TableospfNewCfgVisionAreaTablenot-accessiblecurrentThe table of OSPF Area configuration in the new_config.
1.3.6.1.4.1.1872.2.5.3.1.13.16.1RowospfNewCfgVisionAreaEntrynot-accessiblecurrentInformation about a OSPF area.
1.3.6.1.4.1.1872.2.5.3.1.13.16.1.1ColumnospfNewCfgVisionAreaIndexread-onlycurrentThe OSPF area number for which the OSPF area table is related.
1.3.6.1.4.1.1872.2.5.3.1.13.16.1.2ColumnospfNewCfgVisionAreaIdread-writecurrentThe IP Address of the OSPF area.
1.3.6.1.4.1.1872.2.5.3.1.13.16.1.3ColumnospfNewCfgVisionAreaSpfIntervalread-createcurrentThe SPF interval for the OSPF area.
1.3.6.1.4.1.1872.2.5.3.1.13.16.1.4ColumnospfNewCfgVisionAreaAuthTyperead-createcurrentType of authentication being used. none(1) - no authentication password(2) - use password. md5(3) - use MD5 authentication.
1.3.6.1.4.1.1872.2.5.3.1.13.16.1.5ColumnospfNewCfgVisionAreaTyperead-createcurrentType of area being used.
1.3.6.1.4.1.1872.2.5.3.1.13.16.1.6ColumnospfNewCfgVisionAreaMetricread-createcurrentThe Stub area metric for the OSPF area.
1.3.6.1.4.1.1872.2.5.3.1.13.16.1.7ColumnospfNewCfgVisionAreaStateread-createcurrentEnable or disable OSPF Area.
1.3.6.1.4.1.1872.2.5.3.1.13.16.1.8ColumnospfNewCfgVisionAreaDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.14NodeipGeneralCfg
1.3.6.1.4.1.1872.2.5.3.1.14.1ScalaripCurCfgRouterIDread-onlycurrentThe router ID of the switch.
1.3.6.1.4.1.1872.2.5.3.1.14.2ScalaripNewCfgRouterIDread-writecurrentThe router ID of the switch.
1.3.6.1.4.1.1872.2.5.3.1.14.3ScalaripCurCfgASNumberread-onlycurrentThe autonomous system (AS) number.
1.3.6.1.4.1.1872.2.5.3.1.14.4ScalaripNewCfgASNumberread-writecurrentThe autonomous system (AS) number.
1.3.6.1.4.1.1872.2.5.3.1.14.5ScalaripCurCfgFragTblSizeread-onlycurrentThe IP Fragmentation table size in 20k|40k|60k format.
1.3.6.1.4.1.1872.2.5.3.1.14.6ScalaripNewCfgFragTblSizeread-writecurrentThe IP Fragmentation table size in 20k|40k|60k format.
1.3.6.1.4.1.1872.2.5.3.1.15NodeipStaticArpCfg
1.3.6.1.4.1.1872.2.5.3.1.15.1ScalaripStaticArpTableMaxSizeread-onlycurrentThe maximum number of rows in the Static ARP table.
1.3.6.1.4.1.1872.2.5.3.1.15.2TableipCurCfgStaticArpTablenot-accessiblecurrentThe table of static ARPs in the current configuration block.
1.3.6.1.4.1.1872.2.5.3.1.15.2.1RowipCurCfgStaticArpEntrynot-accessiblecurrentA row in the static ARP table
1.3.6.1.4.1.1872.2.5.3.1.15.2.1.1ColumnipCurCfgStaticArpIndxread-onlycurrentThe index of the static ARP table.
1.3.6.1.4.1.1872.2.5.3.1.15.2.1.2ColumnipCurCfgStaticArpIpread-onlycurrentThe IP address for the ARP entry.
1.3.6.1.4.1.1872.2.5.3.1.15.2.1.3ColumnipCurCfgStaticArpMACread-onlycurrentThe MAC address for the ARP entry.
1.3.6.1.4.1.1872.2.5.3.1.15.2.1.4ColumnipCurCfgStaticArpVlanread-onlycurrentThe VLAN for the ARP entry.
1.3.6.1.4.1.1872.2.5.3.1.15.2.1.5ColumnipCurCfgStaticArpPortread-onlycurrentThe port for the ARP entry.
1.3.6.1.4.1.1872.2.5.3.1.15.3TableipNewCfgStaticArpTablenot-accessiblecurrentThe table of static ARPs in the new configuration block.
1.3.6.1.4.1.1872.2.5.3.1.15.3.1RowipNewCfgStaticArpEntrynot-accessiblecurrentA row in the static ARP table
1.3.6.1.4.1.1872.2.5.3.1.15.3.1.1ColumnipNewCfgStaticArpIndxread-onlycurrentThe index of the static ARP table.
1.3.6.1.4.1.1872.2.5.3.1.15.3.1.2ColumnipNewCfgStaticArpIpread-createcurrentThe IP address for the ARP entry.
1.3.6.1.4.1.1872.2.5.3.1.15.3.1.3ColumnipNewCfgStaticArpMACread-createcurrentThe MAC address for the ARP entry.
1.3.6.1.4.1.1872.2.5.3.1.15.3.1.4ColumnipNewCfgStaticArpVlanread-createcurrentThe VLAN for the ARP entry.
1.3.6.1.4.1.1872.2.5.3.1.15.3.1.5ColumnipNewCfgStaticArpPortread-createcurrentThe port for the ARP entry.
1.3.6.1.4.1.1872.2.5.3.1.15.3.1.6ColumnipNewCfgStaticArpActionread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.1872.2.5.3.1.15.4ScalaripStaticArpTableNextAvailableIndexread-onlycurrentThe next available index in the Static ARP table.
1.3.6.1.4.1.1872.2.5.3.1.18Noderip2Cfg
1.3.6.1.4.1.1872.2.5.3.1.18.1TableripCurCfgIntfTablenot-accessiblecurrentThe table of RIPv2 on IP interface configuration in the current_config. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.18.1.1RowripCurCfgIntfEntrynot-accessiblecurrentInformation about RIPv2 on IP interface. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.18.1.1.1ColumnripCurCfgIntfIndexread-onlycurrentThe interface number for which the RIPv2 information is related.
1.3.6.1.4.1.1872.2.5.3.1.18.1.1.2ColumnripCurCfgIntfVersionread-onlycurrentRIP version. Only RIPv2 is supported
1.3.6.1.4.1.1872.2.5.3.1.18.1.1.3ColumnripCurCfgIntfStateread-onlycurrentEnable or disable RIPv2 protocol.
1.3.6.1.4.1.1872.2.5.3.1.18.1.1.4ColumnripCurCfgIntfListenread-onlycurrentEnable or disable listening to route updates for RIPv2.
1.3.6.1.4.1.1872.2.5.3.1.18.1.1.5ColumnripCurCfgIntfDefListenread-onlyobsoleteEnable or disable listening to default routes for RIPv2.
1.3.6.1.4.1.1872.2.5.3.1.18.1.1.6ColumnripCurCfgIntfTrigUpdateread-onlycurrentEnable or disable triggered updates for RIPv2.
1.3.6.1.4.1.1872.2.5.3.1.18.1.1.7ColumnripCurCfgIntfMcastUpdateread-onlycurrentEnable or disable multicast updates for RIPv2.
1.3.6.1.4.1.1872.2.5.3.1.18.1.1.8ColumnripCurCfgIntfPoisonReverseread-onlycurrentRIPv2 poison reverse.
1.3.6.1.4.1.1872.2.5.3.1.18.1.1.9ColumnripCurCfgIntfSupplyread-onlycurrentEnable or disable supplying route updates for RIPv2.
1.3.6.1.4.1.1872.2.5.3.1.18.1.1.10ColumnripCurCfgIntfMetricread-onlycurrentRIPv2 route metric for this interface.
1.3.6.1.4.1.1872.2.5.3.1.18.1.1.11ColumnripCurCfgIntfAuthread-onlycurrentThe type of Authentication used on this interface for RIPv2.
1.3.6.1.4.1.1872.2.5.3.1.18.1.1.12ColumnripCurCfgIntfKeyread-onlycurrentRIPv2 update authentication password.
1.3.6.1.4.1.1872.2.5.3.1.18.1.1.13ColumnripCurCfgIntfDefaultread-onlycurrentSpecifies what RIPv2 does with default routes.
1.3.6.1.4.1.1872.2.5.3.1.18.2TableripNewCfgIntfTablenot-accessiblecurrentThe table of RIPv2 on IP interface configuration in the new_config. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1RowripNewCfgIntfEntrynot-accessiblecurrentInformation about RIPv2 on IP interface. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1.1ColumnripNewCfgIntfIndexread-onlycurrentThe interface number for which the RIPv2 information is related.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1.2ColumnripNewCfgIntfVersionread-createcurrentRIP version. Only RIPv2 is supported.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1.3ColumnripNewCfgIntfSupplyread-createcurrentEnable or disable supplying route updates for RIPv2.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1.4ColumnripNewCfgIntfListenread-createcurrentEnable or disable listening to route updates for RIPv2.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1.5ColumnripNewCfgIntfDefListenread-createobsoleteEnable or disable listening to default routes for RIPv2.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1.6ColumnripNewCfgIntfTrigUpdateread-createcurrentEnable or disable triggered updates for RIPv2.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1.7ColumnripNewCfgIntfMcastUpdateread-createcurrentEnable or disable multicast updates for RIPv2.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1.8ColumnripNewCfgIntfPoisonReverseread-createcurrentRIPv2 poison reverse.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1.9ColumnripNewCfgIntfStateread-createcurrentEnable or disable RIPv2 protocol.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1.10ColumnripNewCfgIntfMetricread-writecurrentRIPv2 route metric for this interface.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1.11ColumnripNewCfgIntfAuthread-writecurrentThe type of Authentication used on this interface for RIPv2.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1.12ColumnripNewCfgIntfKeyread-createcurrentRIPv2 update authentication password.
1.3.6.1.4.1.1872.2.5.3.1.18.2.1.13ColumnripNewCfgIntfDefaultread-createcurrentSpecifies what RIPv2 does with default routes. The default routes action could be set to listen/supply/both/none.
1.3.6.1.4.1.1872.2.5.3.1.18.3NoderipGeneral
1.3.6.1.4.1.1872.2.5.3.1.18.3.1Scalarrip2CurCfgStateread-onlycurrentRIPv2 global state. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.18.3.2Scalarrip2NewCfgStateread-writecurrentGlobally turn RIPv2 on or off. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.18.3.3Scalarrip2CurCfgUpdatePeriodread-onlycurrentUpdate Period in seconds for RIPv2. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.18.3.4Scalarrip2NewCfgUpdatePeriodread-writecurrentUpdate Period in seconds for RIPv2. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.18.3.5Scalarrip2CurCfgVipread-onlycurrentAdvertise VIP Host Routes for RIPv2. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.18.3.6Scalarrip2NewCfgVipread-writecurrentAdvertise VIP Host Routes for RIPv2. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.18.3.7Scalarrip2CurCfgStaticSupplyread-onlycurrentAdvertise Static Routes for RIPv2. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.18.3.8Scalarrip2NewCfgStaticSupplyread-writecurrentAdvertise Static Routes for RIPv2. Note:This mib is not supported for VX instance of Virtualization.
1.3.6.1.4.1.1872.2.5.3.1.20Nodeospfv3Cfg
1.3.6.1.4.1.1872.2.5.3.1.20.1Nodeospfv3General
1.3.6.1.4.1.1872.2.5.3.1.20.1.1Scalarospfv3CurCfgDefaultRouteMetricread-onlycurrentSpecify the metric to be assigned.
1.3.6.1.4.1.1872.2.5.3.1.20.1.2Scalarospfv3NewCfgDefaultRouteMetricread-writecurrentSpecify the metric to be assigned.
1.3.6.1.4.1.1872.2.5.3.1.20.1.3Scalarospfv3CurCfgDefaultRouteMetricTyperead-onlycurrentSpecify the AS External metric type to be assigned.
1.3.6.1.4.1.1872.2.5.3.1.20.1.4Scalarospfv3NewCfgDefaultRouteMetricTyperead-writecurrentSpecify the AS External metric type to be assigned.
1.3.6.1.4.1.1872.2.5.3.1.20.1.5Scalarospfv3IntfTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Interface table.
1.3.6.1.4.1.1872.2.5.3.1.20.1.6Scalarospfv3AreaTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Area table.
1.3.6.1.4.1.1872.2.5.3.1.20.1.7Scalarospfv3RangeTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Range table.
1.3.6.1.4.1.1872.2.5.3.1.20.1.8Scalarospfv3VirtIntfTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Virtual Interface table.
1.3.6.1.4.1.1872.2.5.3.1.20.1.9Scalarospfv3HostTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Host table.
1.3.6.1.4.1.1872.2.5.3.1.20.1.10Scalarospfv3CurCfgStateread-onlycurrentOSPF global state.
1.3.6.1.4.1.1872.2.5.3.1.20.1.11Scalarospfv3NewCfgStateread-writecurrentGlobally turn OSPF on or off.
1.3.6.1.4.1.1872.2.5.3.1.20.1.12Scalarospfv3CurCfgLsdbread-onlycurrentSpecify the LSDB limit for external LSA.
1.3.6.1.4.1.1872.2.5.3.1.20.1.13Scalarospfv3NewCfgLsdbread-writecurrentSpecify the LSDB limit for external LSA.
1.3.6.1.4.1.1872.2.5.3.1.20.2Tableospfv3CurCfgAreaTablenot-accessiblecurrentThe table of OSPFv3 Area configuration in the current_config.
1.3.6.1.4.1.1872.2.5.3.1.20.2.1Rowospfv3CurCfgAreaEntrynot-accessiblecurrentInformation about a OSPFv3 area.
1.3.6.1.4.1.1872.2.5.3.1.20.2.1.1Columnospfv3CurCfgAreaIndexread-onlycurrentThe OSPFv3 area number for which the OSPF area table is related.
1.3.6.1.4.1.1872.2.5.3.1.20.2.1.2Columnospfv3CurCfgAreaIdread-onlycurrentThe IP Address of the OSPFv3 area.
1.3.6.1.4.1.1872.2.5.3.1.20.2.1.3Columnospfv3CurCfgAreaSpfIntervalread-onlycurrentThe SPF interval for the OSPFv3 area.
1.3.6.1.4.1.1872.2.5.3.1.20.2.1.4Columnospfv3CurCfgAreaTyperead-onlycurrentType of area being used.
1.3.6.1.4.1.1872.2.5.3.1.20.2.1.5Columnospfv3CurCfgAreaMetricread-onlycurrentThe Stub area metric for the OSPFv3 area.
1.3.6.1.4.1.1872.2.5.3.1.20.2.1.6Columnospfv3CurCfgAreaMTyperead-onlycurrentMetric type
1.3.6.1.4.1.1872.2.5.3.1.20.2.1.7Columnospfv3CurCfgAreaSummaryread-onlycurrentArea summary import ena/dis
1.3.6.1.4.1.1872.2.5.3.1.20.2.1.8Columnospfv3CurCfgAreaTrRoleread-onlycurrentTranslator role
1.3.6.1.4.1.1872.2.5.3.1.20.2.1.9Columnospfv3CurCfgAreaStateread-onlycurrentGlobally turn OSPFv3 on or off.
1.3.6.1.4.1.1872.2.5.3.1.20.2.1.10Columnospfv3CurCfgAreaIDRWread-onlycurrentThe IP Address of the OSPFv3 area.
1.3.6.1.4.1.1872.2.5.3.1.20.3Tableospfv3NewCfgAreaTablenot-accessiblecurrentThe table of OSPFv3 Area configuration in the new_config.
1.3.6.1.4.1.1872.2.5.3.1.20.3.1Rowospfv3NewCfgAreaEntrynot-accessiblecurrentInformation about a OSPFv3 area.
1.3.6.1.4.1.1872.2.5.3.1.20.3.1.1Columnospfv3NewCfgAreaIndexread-onlycurrentThe OSPFv3 area number for which the area table is related.
1.3.6.1.4.1.1872.2.5.3.1.20.3.1.2Columnospfv3NewCfgAreaIdread-onlycurrentThe octal notation of the OSPFv3 area.
1.3.6.1.4.1.1872.2.5.3.1.20.3.1.3Columnospfv3NewCfgAreaSpfIntervalread-createcurrentThe SPF interval for the OSPFv3 area.
1.3.6.1.4.1.1872.2.5.3.1.20.3.1.4Columnospfv3NewCfgAreaTyperead-createcurrentType of area being used.
1.3.6.1.4.1.1872.2.5.3.1.20.3.1.5Columnospfv3NewCfgAreaMetricread-createcurrentThe Stub area metric for the OSPFv3 area.
1.3.6.1.4.1.1872.2.5.3.1.20.3.1.6Columnospfv3NewCfgAreaMTyperead-createcurrentMetric type
1.3.6.1.4.1.1872.2.5.3.1.20.3.1.7Columnospfv3NewCfgAreaSummaryread-createcurrentOspfv3 summary import ena/dis
1.3.6.1.4.1.1872.2.5.3.1.20.3.1.8Columnospfv3NewCfgAreaTrRoleread-createcurrentTranslator role
1.3.6.1.4.1.1872.2.5.3.1.20.3.1.9Columnospfv3NewCfgAreaStateread-createcurrentEnable or disable OSPFv3 Area.
1.3.6.1.4.1.1872.2.5.3.1.20.3.1.10Columnospfv3NewCfgAreaDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.20.3.1.11Columnospfv3NewCfgAreaIDRWread-createcurrentThe octal notation of the OSPFv3 area.
1.3.6.1.4.1.1872.2.5.3.1.20.4Nodeospfv3RouteRedistribution
1.3.6.1.4.1.1872.2.5.3.1.20.4.1Nodeospfv3RedistributeStatic
1.3.6.1.4.1.1872.2.5.3.1.20.4.1.1Scalarospfv3CurCfgStaticMetricread-onlycurrentThe metric to be assigned to static routes. A value of 0 indicates none.
1.3.6.1.4.1.1872.2.5.3.1.20.4.1.2Scalarospfv3NewCfgStaticMetricread-writecurrentThe metric to be assigned to static routes. A value of 0 indicates none.
1.3.6.1.4.1.1872.2.5.3.1.20.4.1.3Scalarospfv3CurCfgStaticMetricTyperead-onlycurrentThe AS External metric type for static routes.
1.3.6.1.4.1.1872.2.5.3.1.20.4.1.4Scalarospfv3NewCfgStaticMetricTyperead-writecurrentThe AS External metric type for static routes.
1.3.6.1.4.1.1872.2.5.3.1.20.4.1.5Scalarospfv3CurCfgStaticOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.20.4.1.6Scalarospfv3NewCfgStaticOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.20.4.1.7Scalarospfv3NewCfgStaticAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.20.4.1.8Scalarospfv3NewCfgStaticRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.20.4.2Nodeospfv3RedistributeEbgp
1.3.6.1.4.1.1872.2.5.3.1.20.4.2.1Scalarospfv3CurCfgEbgpMetricread-onlycurrentThe export metric to be assigned to External BGP routes. A value of 0 indicates none.
1.3.6.1.4.1.1872.2.5.3.1.20.4.2.2Scalarospfv3NewCfgEbgpMetricread-writecurrentThe export metric to be assigned to External BGP routes. A value of 0 indicates none.
1.3.6.1.4.1.1872.2.5.3.1.20.4.2.3Scalarospfv3CurCfgEbgpMetricTyperead-onlycurrentThe AS External metric type for External BGP routes.
1.3.6.1.4.1.1872.2.5.3.1.20.4.2.4Scalarospfv3NewCfgEbgpMetricTyperead-writecurrentThe AS External metric type for External BGP routes.
1.3.6.1.4.1.1872.2.5.3.1.20.4.2.5Scalarospfv3CurCfgEbgpOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.20.4.2.6Scalarospfv3NewCfgEbgpOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.20.4.2.7Scalarospfv3NewCfgEbgpAddOutRmapread-writecurrentThe route map to be added into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.20.4.2.8Scalarospfv3NewCfgEbgpRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.20.4.3Nodeospfv3RedistributeIbgp
1.3.6.1.4.1.1872.2.5.3.1.20.4.3.1Scalarospfv3CurCfgIbgpMetricread-onlycurrentThe export metric for Internal BGP routes. A value of 0 indicates none.
1.3.6.1.4.1.1872.2.5.3.1.20.4.3.2Scalarospfv3NewCfgIbgpMetricread-writecurrentThe export metric for Internal BGP routes. A value of 0 indicates none.
1.3.6.1.4.1.1872.2.5.3.1.20.4.3.3Scalarospfv3CurCfgIbgpMetricTyperead-onlycurrentThe AS External metric type for Internal BGP routes.
1.3.6.1.4.1.1872.2.5.3.1.20.4.3.4Scalarospfv3NewCfgIbgpMetricTyperead-writecurrentThe AS External metric type for Internal BGP routes.
1.3.6.1.4.1.1872.2.5.3.1.20.4.3.5Scalarospfv3CurCfgIbgpOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.20.4.3.6Scalarospfv3NewCfgIbgpOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.20.4.3.7Scalarospfv3NewCfgIbgpAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.20.4.3.8Scalarospfv3NewCfgIbgpRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.20.4.4Nodeospfv3RedistributeFixed
1.3.6.1.4.1.1872.2.5.3.1.20.4.4.1Scalarospfv3CurCfgFixedMetricread-onlycurrentThe export metric for fixed routes. A value of 0 indicates none
1.3.6.1.4.1.1872.2.5.3.1.20.4.4.2Scalarospfv3NewCfgFixedMetricread-writecurrentThe export metric for fixed routes. A value of 0 indicates none
1.3.6.1.4.1.1872.2.5.3.1.20.4.4.3Scalarospfv3CurCfgFixedMetricTyperead-onlycurrentThe AS External metric type for fixed routes.
1.3.6.1.4.1.1872.2.5.3.1.20.4.4.4Scalarospfv3NewCfgFixedMetricTyperead-writecurrentThe AS External metric type for fixed routes.
1.3.6.1.4.1.1872.2.5.3.1.20.4.4.5Scalarospfv3CurCfgFixedOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.20.4.4.6Scalarospfv3NewCfgFixedOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.20.4.4.7Scalarospfv3NewCfgFixedAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.20.4.4.8Scalarospfv3NewCfgFixedRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.20.4.5Nodeospfv3RedistributeRip
1.3.6.1.4.1.1872.2.5.3.1.20.4.5.1Scalarospfv3CurCfgRipMetricread-onlycurrentThe export metric for RIP routes. A value of 0 indicates none
1.3.6.1.4.1.1872.2.5.3.1.20.4.5.2Scalarospfv3NewCfgRipMetricread-writecurrentThe export metric for RIP routes. A value of 0 indicates none
1.3.6.1.4.1.1872.2.5.3.1.20.4.5.3Scalarospfv3CurCfgRipMetricTyperead-onlycurrentThe AS External metric type for RIP routes.
1.3.6.1.4.1.1872.2.5.3.1.20.4.5.4Scalarospfv3NewCfgRipMetricTyperead-writecurrentThe AS External metric type for RIP routes.
1.3.6.1.4.1.1872.2.5.3.1.20.4.5.5Scalarospfv3CurCfgRipOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.20.4.5.6Scalarospfv3NewCfgRipOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.1872.2.5.3.1.20.4.5.7Scalarospfv3NewCfgRipAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.20.4.5.8Scalarospfv3NewCfgRipRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.20.7Tableospfv3CurCfgIntfTablenot-accessiblecurrentThe table of OSPFv3 Interface configuration in the current_config.
1.3.6.1.4.1.1872.2.5.3.1.20.7.1Rowospfv3CurCfgIntfEntrynot-accessiblecurrentInformation about an OSPFv3 Interface.
1.3.6.1.4.1.1872.2.5.3.1.20.7.1.1Columnospfv3CurCfgIntfIndexread-onlycurrentThe OSPFv3 Interface number for which the OSPFv3 Interface table is related.
1.3.6.1.4.1.1872.2.5.3.1.20.7.1.2Columnospfv3CurCfgIntfIdread-onlycurrentThe IP Address of the OSPFv3 interface.
1.3.6.1.4.1.1872.2.5.3.1.20.7.1.3Columnospfv3CurCfgIntfAreaIdread-onlycurrentSpecify Area Index.
1.3.6.1.4.1.1872.2.5.3.1.20.7.1.4Columnospfv3CurCfgIntfPriorityread-onlycurrentSpecify interface router priority.
1.3.6.1.4.1.1872.2.5.3.1.20.7.1.5Columnospfv3CurCfgIntfCostread-onlycurrentInterface Cost.
1.3.6.1.4.1.1872.2.5.3.1.20.7.1.6Columnospfv3CurCfgIntfHelloread-onlycurrentHello interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.7.1.7Columnospfv3CurCfgIntfDeadread-onlycurrentDead interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.7.1.8Columnospfv3CurCfgIntfTransitread-onlycurrentTransit delay in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.7.1.9Columnospfv3CurCfgIntfRetransread-onlycurrentRetransmit interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.7.1.12Columnospfv3CurCfgIntfStateread-onlycurrentOSPFv3 Interface Enabled/disabled .
1.3.6.1.4.1.1872.2.5.3.1.20.8Tableospfv3NewCfgIntfTablenot-accessiblecurrentThe table of OSPFv3 Interface configuration in the new_config.
1.3.6.1.4.1.1872.2.5.3.1.20.8.1Rowospfv3NewCfgIntfEntrynot-accessiblecurrentInformation about an OSPFv3 Interface.
1.3.6.1.4.1.1872.2.5.3.1.20.8.1.1Columnospfv3NewCfgIntfIndexread-onlycurrentThe OSPFv3 Interface number for which the OSPFv3 Interface table is related.
1.3.6.1.4.1.1872.2.5.3.1.20.8.1.2Columnospfv3NewCfgIntfIdread-onlycurrentThe IP Address of the OSPF interface.
1.3.6.1.4.1.1872.2.5.3.1.20.8.1.3Columnospfv3NewCfgIntfAreaIdread-createcurrentSpecify Area Index.
1.3.6.1.4.1.1872.2.5.3.1.20.8.1.4Columnospfv3NewCfgIntfPriorityread-createcurrentSpecify interface router priority.
1.3.6.1.4.1.1872.2.5.3.1.20.8.1.5Columnospfv3NewCfgIntfCostread-createcurrentSpecify interface cost.
1.3.6.1.4.1.1872.2.5.3.1.20.8.1.6Columnospfv3NewCfgIntfHelloread-createcurrentHello interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.8.1.7Columnospfv3NewCfgIntfDeadread-createcurrentDead interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.8.1.8Columnospfv3NewCfgIntfTransitread-createcurrentTransit delay in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.8.1.9Columnospfv3NewCfgIntfRetransread-createcurrentRetransmit interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.8.1.12Columnospfv3NewCfgIntfStateread-createcurrentEnable or disable OSPFv3 Interface.
1.3.6.1.4.1.1872.2.5.3.1.20.8.1.13Columnospfv3NewCfgIntfDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.20.9Tableospfv3CurCfgVirtIntfTablenot-accessiblecurrentThe table of OSPFv3 Virtual Interface configuration in the current configuration.
1.3.6.1.4.1.1872.2.5.3.1.20.9.1Rowospfv3CurCfgVirtIntfEntrynot-accessiblecurrentInformation about an OSPFv3 virtual Interface.
1.3.6.1.4.1.1872.2.5.3.1.20.9.1.1Columnospfv3CurCfgVirtIntfIndexread-onlycurrentThe OSPFv3 Virtual Interface number for which the OSPFv3 Virtual Interface table is related.
1.3.6.1.4.1.1872.2.5.3.1.20.9.1.2Columnospfv3CurCfgVirtIntfAreaIdread-onlycurrentThe OSPFv3 Area Id.
1.3.6.1.4.1.1872.2.5.3.1.20.9.1.3Columnospfv3CurCfgVirtIntfNbrread-onlycurrentThe IP Address of the OSPFv3 neighbour for this virtual interface.
1.3.6.1.4.1.1872.2.5.3.1.20.9.1.4Columnospfv3CurCfgVirtIntfHelloread-onlycurrentHello interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.9.1.5Columnospfv3CurCfgVirtIntfDeadread-onlycurrentDead interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.9.1.6Columnospfv3CurCfgVirtIntfTransitread-onlycurrentTransit delay in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.9.1.7Columnospfv3CurCfgVirtIntfRetransread-onlycurrentRetransmit interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.9.1.8Columnospfv3CurCfgVirtIntfStateread-onlycurrentOSPFv3 Interface Enabled/disabled .
1.3.6.1.4.1.1872.2.5.3.1.20.10Tableospfv3NewCfgVirtIntfTablenot-accessiblecurrentThe table of OSPFv3 Virtual Interface configuration in the new_config.
1.3.6.1.4.1.1872.2.5.3.1.20.10.1Rowospfv3NewCfgVirtIntfEntrynot-accessiblecurrentInformation about an OSPFv3 virtual Interface.
1.3.6.1.4.1.1872.2.5.3.1.20.10.1.1Columnospfv3NewCfgVirtIntfIndexread-onlycurrentThe OSPFv3 Virtual Interface number for which the OSPF v3 Virtual Interface table is related.
1.3.6.1.4.1.1872.2.5.3.1.20.10.1.2Columnospfv3NewCfgVirtIntfAreaIdread-createcurrentThe OSPFv3 Area Id.
1.3.6.1.4.1.1872.2.5.3.1.20.10.1.3Columnospfv3NewCfgVirtIntfNbrread-createcurrentThe IP Address of the OSPFv3 neighbour for this virtual interface.
1.3.6.1.4.1.1872.2.5.3.1.20.10.1.4Columnospfv3NewCfgVirtIntfHelloread-createcurrentHello interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.10.1.5Columnospfv3NewCfgVirtIntfDeadread-createcurrentDead interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.10.1.6Columnospfv3NewCfgVirtIntfTransitread-createcurrentTransit delay in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.10.1.7Columnospfv3NewCfgVirtIntfRetransread-createcurrentRetransmit interval in seconds.
1.3.6.1.4.1.1872.2.5.3.1.20.10.1.8Columnospfv3NewCfgVirtIntfStateread-createcurrentEnable or disable OSPFv3 Interface.
1.3.6.1.4.1.1872.2.5.3.1.20.10.1.9Columnospfv3NewCfgVirtIntfDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.20.12Tableospfv3CurCfgHostTablenot-accessiblecurrentThe table of OSPFv3 Host configuration.
1.3.6.1.4.1.1872.2.5.3.1.20.12.1Rowospfv3CurCfgHostEntrynot-accessiblecurrentInformation about a OSPFv3 host.
1.3.6.1.4.1.1872.2.5.3.1.20.12.1.1Columnospfv3CurCfgHostIndexread-onlycurrentThe OSPFv3 host number for which the OSPF host table is related.
1.3.6.1.4.1.1872.2.5.3.1.20.12.1.2Columnospfv3CurCfgHostIp6Addrread-onlycurrentThe IP Address of the OSPFv3 host.
1.3.6.1.4.1.1872.2.5.3.1.20.12.1.3Columnospfv3CurCfgHostAreaIndexread-onlycurrentThe area index.
1.3.6.1.4.1.1872.2.5.3.1.20.12.1.4Columnospfv3CurCfgHostCostread-onlycurrentCost of the host entry.
1.3.6.1.4.1.1872.2.5.3.1.20.12.1.5Columnospfv3CurCfgHostStateread-onlycurrentEnable or disable Host Entry.
1.3.6.1.4.1.1872.2.5.3.1.20.13Tableospfv3NewCfgHostTablenot-accessiblecurrentThe table of OSPFv3 Host configuration.
1.3.6.1.4.1.1872.2.5.3.1.20.13.1Rowospfv3NewCfgHostEntrynot-accessiblecurrentInformation about a OSPFv3 host.
1.3.6.1.4.1.1872.2.5.3.1.20.13.1.1Columnospfv3NewCfgHostIndexread-onlycurrentThe OSPFv3 host number for which the OSPFv3 host table is related.
1.3.6.1.4.1.1872.2.5.3.1.20.13.1.2Columnospfv3NewCfgHostIp6Addrread-createcurrentThe IP Address of the OSPFv3 host.
1.3.6.1.4.1.1872.2.5.3.1.20.13.1.3Columnospfv3NewCfgHostAreaIndexread-createcurrentThe OSPFv3 area index.
1.3.6.1.4.1.1872.2.5.3.1.20.13.1.4Columnospfv3NewCfgHostCostread-createcurrentCost of the host entry.
1.3.6.1.4.1.1872.2.5.3.1.20.13.1.5Columnospfv3NewCfgHostStateread-createcurrentEnable or disable Host Entry.
1.3.6.1.4.1.1872.2.5.3.1.20.13.1.6Columnospfv3NewCfgHostDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.20.14Tableospfv3CurCfgRangeTablenot-accessiblecurrentThe table of OSPFv3 summary range in the current configuration.
1.3.6.1.4.1.1872.2.5.3.1.20.14.1Rowospfv3CurCfgRangeEntrynot-accessiblecurrentInformation about an OSPFv3 summary range.
1.3.6.1.4.1.1872.2.5.3.1.20.14.1.1Columnospfv3CurCfgRangeIndexread-onlycurrentThe range number for which the OSPFv3 summary range table is related.
1.3.6.1.4.1.1872.2.5.3.1.20.14.1.2Columnospfv3CurCfgRangeAddrread-onlycurrentThe IP Address of the range.
1.3.6.1.4.1.1872.2.5.3.1.20.14.1.3Columnospfv3CurCfgRangePrefixread-onlycurrentThe mask of the range.
1.3.6.1.4.1.1872.2.5.3.1.20.14.1.4Columnospfv3CurCfgRangeAreaIndexread-onlycurrentThe area index.
1.3.6.1.4.1.1872.2.5.3.1.20.14.1.5Columnospfv3CurCfgRangeHideStateread-onlycurrentThe state of the hide range.
1.3.6.1.4.1.1872.2.5.3.1.20.14.1.6Columnospfv3CurCfgRangeStateread-onlycurrentThe state of the range.
1.3.6.1.4.1.1872.2.5.3.1.20.15Tableospfv3NewCfgRangeTablenot-accessiblecurrentThe table of OSPFv3 summary range in the new configuration.
1.3.6.1.4.1.1872.2.5.3.1.20.15.1Rowospfv3NewCfgRangeEntrynot-accessiblecurrentInformation about an OSPFv3 summary range.
1.3.6.1.4.1.1872.2.5.3.1.20.15.1.1Columnospfv3NewCfgRangeIndexread-onlycurrentThe range number for which the OSPFv3 summary range table is related.
1.3.6.1.4.1.1872.2.5.3.1.20.15.1.2Columnospfv3NewCfgRangeAddrread-createcurrentThe IP Address of the range.
1.3.6.1.4.1.1872.2.5.3.1.20.15.1.3Columnospfv3NewCfgRangePrefixread-createcurrentThe prefix length of the range.
1.3.6.1.4.1.1872.2.5.3.1.20.15.1.4Columnospfv3NewCfgRangeAreaIndexread-createcurrentThe area index.
1.3.6.1.4.1.1872.2.5.3.1.20.15.1.5Columnospfv3NewCfgRangeHideStateread-createcurrentThe state of the hide range.
1.3.6.1.4.1.1872.2.5.3.1.20.15.1.6Columnospfv3NewCfgRangeStateread-createcurrentThe state of the range.
1.3.6.1.4.1.1872.2.5.3.1.20.15.1.7Columnospfv3NewCfgRangeDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.21NodehaCfg
1.3.6.1.4.1.1872.2.5.3.1.21.1ScalarhaCurCfgModeread-onlycurrentThe high availability mode.
1.3.6.1.4.1.1872.2.5.3.1.21.2ScalarhaNewCfgModeread-writecurrentThe high availability mode.
1.3.6.1.4.1.1872.2.5.3.1.21.3ScalarhaCurCfgHoldoffTimeread-onlycurrentThe holdoff time.
1.3.6.1.4.1.1872.2.5.3.1.21.4ScalarhaNewCfgHoldoffTimeread-writecurrentThe holdoff time.
1.3.6.1.4.1.1872.2.5.3.1.21.5NodehaSwitch
1.3.6.1.4.1.1872.2.5.3.1.21.5.1ScalarhaSwitchCurCfgPrefread-onlycurrentThe preferred initial state.
1.3.6.1.4.1.1872.2.5.3.1.21.5.2ScalarhaSwitchNewCfgPrefread-writecurrentThe preferred initial state.
1.3.6.1.4.1.1872.2.5.3.1.21.5.3ScalarhaSwitchCurCfgFailBackModeread-onlycurrentThe fail back mode.
1.3.6.1.4.1.1872.2.5.3.1.21.5.4ScalarhaSwitchNewCfgFailBackModeread-writecurrentThe fail back mode.
1.3.6.1.4.1.1872.2.5.3.1.21.5.5ScalarhaSwitchCurCfgAdvIfsMapListread-onlycurrentThe advertisement interfaces present in the out map list. The advertisement interfaces maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET…
1.3.6.1.4.1.1872.2.5.3.1.21.5.6ScalarhaSwitchNewCfgAdvIfsMapListread-onlycurrentThe advertisement interfaces present in the out map list. The advertisement interfaces maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET…
1.3.6.1.4.1.1872.2.5.3.1.21.5.7ScalarhaSwitchNewCfgAddIfread-writecurrentAdd interface for HA communication between the devices.
1.3.6.1.4.1.1872.2.5.3.1.21.5.8ScalarhaSwitchNewCfgRemIfread-writecurrentRemove interface for HA communication between the devices.
1.3.6.1.4.1.1872.2.5.3.1.21.5.9ScalarhaSwitchCurCfgAdverread-onlycurrentThe advertisement Interval.
1.3.6.1.4.1.1872.2.5.3.1.21.5.10ScalarhaSwitchNewCfgAdverread-writecurrentThe advertisement Interval.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11NodehaTrigger
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.1ScalarhaSwitchCurCfgTriggerl4Realsread-onlycurrentEnable or disable tracking L4 real servers.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.2ScalarhaSwitchNewCfgTriggerl4Realsread-writecurrentEnable or disable tracking L4 real servers.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.3NodehaTriggerIfs
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.3.1ScalarhaSwitchNewCfgTrigIfTrackAddread-writecurrentAdd interface to tracking list.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.3.2ScalarhaSwitchNewCfgTrigIfTrackExcluderead-writecurrentExclude interface from tracking list.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.3.3ScalarhaSwitchCurCfgTrackIfsMapListread-onlycurrentThe tracking interfaces present in the out map list. The tracking interfaces maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... x…
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.3.4ScalarhaSwitchNewCfgTrackIfsMapListread-onlycurrentThe tracking interfaces present in the out map list. The tracking interfaces maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... x…
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.4NodehaGwTrack
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.4.1ScalarhaSwitchCurCfgTrigGwTrackStateread-onlycurrentEnable or disable gateway tracking.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.4.2ScalarhaSwitchNewCfgTrigGwTrackStateread-writecurrentEnable or disable gateway tracking.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.4.3ScalarhaSwitchNewCfgTrigGwTrackAddread-writecurrentAdd gateway to tracking list.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.4.4ScalarhaSwitchNewCfgTrigGwTrackExcluderead-writecurrentExclude gateway to tracking list.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.4.5ScalarhaSwitchCurCfgTrackGwsMapListread-onlycurrentThe tracking gateways present in the out map list. The tracking gateways maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxx…
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.4.6ScalarhaSwitchNewCfgTrackGwsMapListread-onlycurrentThe tracking gateways present in the out map list. The tracking gateways maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxx…
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.5NodehaTriggerReals
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.5.1ScalarhaSwitchCurCfgTriggerNewl4Realsread-onlycurrentEnable or disable real server tracking.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.5.2ScalarhaSwitchNewCfgTriggerNewl4Realsread-writecurrentEnable or disable real server tracking.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.5.3ScalarhaSwitchCurCfgTriggerAllReml4Realsread-onlycurrentaadd - to add all the real servers to tracking. arem - to remove all the real servers from tracking.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.5.4ScalarhaSwitchNewCfgTriggerAllReml4Realsread-writecurrentaadd - to add all the real servers to tracking. arem - to remove all the real servers from tracking.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.5.5ScalarhaSwitchCurCfgTriggerListl4Realsread-onlycurrentThe Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 |…
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.5.6ScalarhaSwitchNewCfgTriggerListl4Realsread-onlycurrentThe Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 |…
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.5.7ScalarhaSwitchNewCfgTriggerAddl4Realsread-createcurrentThe real server to be added to the group. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.5.8ScalarhaSwitchNewCfgTriggerRemovel4Realsread-createcurrentThe real server to be removed from the group. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.6TablehaSwitchRealTrkTablenot-accessiblecurrentThe table of Real to HA switch group.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.6.1RowhaSwitchRealTrkEntrynot-accessiblecurrentInformation about a real to HA group.
1.3.6.1.4.1.1872.2.5.3.1.21.5.11.6.1.1ColumnhaSwitchRealTrkIndexread-onlycurrentThe Real ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.5.12ScalarhaSwitchCurCfgOrderread-onlycurrentThe failover order group.
1.3.6.1.4.1.1872.2.5.3.1.21.5.13ScalarhaSwitchNewCfgOrderread-writecurrentThe failover order group.
1.3.6.1.4.1.1872.2.5.3.1.21.6TablehaFloatIpCurCfgTablenot-accessiblecurrentThe table of Floating IP configurations.
1.3.6.1.4.1.1872.2.5.3.1.21.6.1RowhaFloatIpCurCfgEntrynot-accessiblecurrentInformation about a particular Floating IP configuration.
1.3.6.1.4.1.1872.2.5.3.1.21.6.1.1ColumnhaFloatIpCurCfgIndexread-onlycurrentThe floating IP number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.6.1.2ColumnhaFloatIpCurCfgIpVerread-onlycurrentThe floating IP version.
1.3.6.1.4.1.1872.2.5.3.1.21.6.1.3ColumnhaFloatIpCurCfgIpAddrread-onlycurrentThe floating IP address.
1.3.6.1.4.1.1872.2.5.3.1.21.6.1.4ColumnhaFloatIpCurCfgIpv6Addrread-onlycurrentIPV6 address of the floating IP identified by the instance of the haFloatIpCurCfgIndex. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address…
1.3.6.1.4.1.1872.2.5.3.1.21.6.1.5ColumnhaFloatIpCurCfgIfread-onlycurrentFloating IP interface.
1.3.6.1.4.1.1872.2.5.3.1.21.6.1.6ColumnhaFloatIpCurCfgStateread-onlycurrentEnable or disable floating IP.
1.3.6.1.4.1.1872.2.5.3.1.21.7TablehaFloatIpNewCfgTablenot-accessiblecurrentThe table of Floating IP configurations.
1.3.6.1.4.1.1872.2.5.3.1.21.7.1RowhaFloatIpNewCfgEntrynot-accessiblecurrentInformation about a particular Floating IP configuration.
1.3.6.1.4.1.1872.2.5.3.1.21.7.1.1ColumnhaFloatIpNewCfgIndexread-onlycurrentThe floating IP number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.7.1.2ColumnhaFloatIpNewCfgIpVerread-createcurrentThe floating IP version.
1.3.6.1.4.1.1872.2.5.3.1.21.7.1.3ColumnhaFloatIpNewCfgIpAddrread-createcurrentThe floating IP address.
1.3.6.1.4.1.1872.2.5.3.1.21.7.1.4ColumnhaFloatIpNewCfgIpv6Addrread-createcurrentIPV6 address of the floating IP identified by the instance of the haFloatIpNewCfgIndex. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address…
1.3.6.1.4.1.1872.2.5.3.1.21.7.1.5ColumnhaFloatIpNewCfgIfread-createcurrentFloating IP interface.
1.3.6.1.4.1.1872.2.5.3.1.21.7.1.6ColumnhaFloatIpNewCfgDeleteread-createcurrentBy setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.5.3.1.21.7.1.7ColumnhaFloatIpNewCfgStateread-createcurrentEnable or disable floating IP.
1.3.6.1.4.1.1872.2.5.3.1.21.8NodehaService
1.3.6.1.4.1.1872.2.5.3.1.21.8.1TablehaServiceCurCfgTablenot-accessiblecurrentThe table of HA Service configurations.
1.3.6.1.4.1.1872.2.5.3.1.21.8.1.1RowhaServiceCurCfgEntrynot-accessiblecurrentInformation about a particular HA Service configuration.
1.3.6.1.4.1.1872.2.5.3.1.21.8.1.1.1ColumnhaServiceCurCfgIndexread-onlycurrentThe service index in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.1.1.2ColumnhaServiceCurCfgPrefread-onlycurrentThe preferred initial state.
1.3.6.1.4.1.1872.2.5.3.1.21.8.1.1.3ColumnhaServiceCurCfgFailBackModeread-onlycurrentThe fail back mode.
1.3.6.1.4.1.1872.2.5.3.1.21.8.1.1.4ColumnhaServiceCurCfgAdverread-onlycurrentThe advertisement Interval.
1.3.6.1.4.1.1872.2.5.3.1.21.8.1.1.5ColumnhaServiceCurCfgStateread-onlycurrentEnable/disable HA service group.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2TablehaServiceNewCfgTablenot-accessiblecurrentThe table of HA Service configurations.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2.1RowhaServiceNewCfgEntrynot-accessiblecurrentInformation about a particular HA Service configuration.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2.1.1ColumnhaServiceNewCfgIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2.1.2ColumnhaServiceNewCfgPrefread-createcurrentThe preferred initial state.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2.1.3ColumnhaServiceNewCfgFailBackModeread-createcurrentThe fail back mode.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2.1.4ColumnhaServiceNewCfgAddIfread-createcurrentAdd interface for HA communication between the devices.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2.1.5ColumnhaServiceNewCfgRemIfread-createcurrentRemove interface from HA communication between the devices.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2.1.6ColumnhaServiceNewCfgAddFipread-createcurrentAdd Floating IP to HA group.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2.1.7ColumnhaServiceNewCfgRemFipread-createcurrentRemove Floating IP from HA group.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2.1.8ColumnhaServiceNewCfgAddVipread-createcurrentAdd VIP to HA group.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2.1.9ColumnhaServiceNewCfgRemVipread-createcurrentRemove VIP from HA group.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2.1.10ColumnhaServiceNewCfgAdverread-createcurrentThe advertisement Interval.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2.1.11ColumnhaServiceNewCfgDeleteread-createcurrentBy setting the value to delete(2), the entire HA group is deleted.
1.3.6.1.4.1.1872.2.5.3.1.21.8.2.1.12ColumnhaServiceNewCfgStateread-createcurrentEnable/disable HA service group.
1.3.6.1.4.1.1872.2.5.3.1.21.8.3TablehaServiceVipTablenot-accessiblecurrentThe table of VIP to HA group.
1.3.6.1.4.1.1872.2.5.3.1.21.8.3.1RowhaServiceVipEntrynot-accessiblecurrentInformation about a VIP to HA group.
1.3.6.1.4.1.1872.2.5.3.1.21.8.3.1.1ColumnhaServiceIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.3.1.2ColumnhaServiceVipIndexread-onlycurrentThe virtual ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.4TablehaServiceFipTablenot-accessiblecurrentThe table of FIP to HA group.
1.3.6.1.4.1.1872.2.5.3.1.21.8.4.1RowhaServiceFipEntrynot-accessiblecurrentInformation about a FIP to HA group.
1.3.6.1.4.1.1872.2.5.3.1.21.8.4.1.1ColumnhaServiceFipIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.4.1.2ColumnhaFipIndexread-onlycurrentThe Floating IP ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.5TablehaServiceAdvIfsTablenot-accessiblecurrentThe table of advertisement interface.
1.3.6.1.4.1.1872.2.5.3.1.21.8.5.1RowhaServiceAdvIfsEntrynot-accessiblecurrentInformation about a advertisement interface.
1.3.6.1.4.1.1872.2.5.3.1.21.8.5.1.1ColumnhaServiceAdvIfIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.5.1.2ColumnhaAdvIfIndexread-onlycurrentThe advertisement interface number.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6NodehaServiceTrigger
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.1TablehaServiceTriggerCurCfgTablenot-accessiblecurrentThe table of trigger configurations.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.1.1RowhaServiceTriggerCurCfgEntrynot-accessiblecurrentInformation about a particular trigger configuration.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.1.1.1ColumnhaServiceTriggerCurCfgIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.1.1.2ColumnhaServiceTriggerCurCfgl4Realsread-onlycurrentEnable or disable tracking L4 real servers.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.2TablehaServiceTriggerNewCfgTablenot-accessiblecurrentThe table of trigger configurations.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.2.1RowhaServiceTriggerNewCfgEntrynot-accessiblecurrentInformation about a particular trigger configuration.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.2.1.1ColumnhaServiceTriggerNewCfgIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.2.1.2ColumnhaServiceTriggerNewCfgl4Realsread-createcurrentEnable or disable tracking L4 real servers.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.3NodehaServiceTriggerIfs
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.3.1TablehaServiceTriggerIfsNewCfgTablenot-accessiblecurrentThe table of tracking interface configurations.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.3.1.1RowhaServiceTriggerIfsNewCfgEntrynot-accessiblecurrentInformation about a particular tracking interface configuration.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.3.1.1.1ColumnhaServiceTriggerIfsNewCfgIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.3.1.1.2ColumnhaServiceNewCfgTrigIfTrackAddread-createcurrentAdd interface to tracking list.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.3.1.1.3ColumnhaServiceNewCfgTrigIfTrackExcluderead-createcurrentExclude interface from tracking list.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.3.2TablehaServiceTrackIfsTablenot-accessiblecurrentThe table of tracking interface.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.3.2.1RowhaServiceTrackIfsEntrynot-accessiblecurrentInformation about a tracking interface.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.3.2.1.1ColumnhaServiceTrackIfIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.3.2.1.2ColumnhaTrackIfIndexread-onlycurrentThe tracking interface number.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4NodehaServiceGwTrack
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.1TablehaServiceTriggerGwCurCfgTablenot-accessiblecurrentThe table of gateway tracking configurations.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.1.1RowhaServiceTriggerGwCurCfgEntrynot-accessiblecurrentInformation about a particular gateway tracking configuration.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.1.1.1ColumnhaServiceTriggerGwCurCfgIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.1.1.2ColumnhaServiceCurCfgTrigGwTrackStateread-onlycurrentEnable or disable gateway tracking.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.2TablehaServiceTriggerGwNewCfgTablenot-accessiblecurrentThe table of trigger gateway configurations.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.2.1RowhaServiceTriggerGwNewCfgEntrynot-accessiblecurrentInformation about a trigger gateway configuration.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.2.1.1ColumnhaServiceTriggerGwNewCfgIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.2.1.2ColumnhaServiceNewCfgTrigGwTrackStateread-writecurrentEnable or disable gateway tracking.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.2.1.3ColumnhaServiceNewCfgTrigGwTrackAddread-writecurrentAdd gateway to tracking list.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.2.1.4ColumnhaServiceNewCfgTrigGwTrackExcluderead-writecurrentExclude gateway to tracking list.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.3TablehaServiceTrackGwsTablenot-accessiblecurrentThe table of gateway tracking list.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.3.1RowhaServiceTrackGwsEntrynot-accessiblecurrentInformation about gateway tracking list.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.3.1.1ColumnhaServiceTrackGwIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.4.3.1.2ColumnhaTrackGwIndexread-onlycurrentAdded gateway to tracking list.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5NodehaServiceRealTrack
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.1TablehaServiceTriggerRealCurCfgTablenot-accessiblecurrentThe table of real tracking configurations.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.1.1RowhaServiceTriggerRealCurCfgEntrynot-accessiblecurrentInformation about a particular real tracking configuration.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.1.1.1ColumnhaServiceTriggerRealCurCfgIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.1.1.2ColumnhaServiceCurCfgTrigRealTrkStateread-onlycurrentEnable or disable real tracking.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.1.1.3ColumnhaServiceCurCfgTrigAllRemRealStateread-onlycurrentaadd - to add all the real servers to tracking. arem - to remove all the real servers from tracking.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.1.1.4ColumnhaServiceCurCfgTrigRealTrkAutoOptStateread-onlycurrentThe AutoOpt Flag.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.2TablehaServiceTriggerRealNewCfgTablenot-accessiblecurrentThe table of trigger real configurations.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.2.1RowhaServiceTriggerRealNewCfgEntrynot-accessiblecurrentInformation about a trigger real configuration.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.2.1.1ColumnhaServiceTriggerRealNewCfgIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.2.1.2ColumnhaServiceNewCfgTrigRealTrkStateread-writecurrentEnable or disable real tracking.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.2.1.3ColumnhaServiceNewCfgTrigAllRemRealStateread-writecurrentSelect aadd - to add all the real servers to tracking. Select arem - to remove all the real servers from tracking.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.2.1.4ColumnhaServiceNewCfgTrigAddRealsread-createcurrentThe real server to be added to the group. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.2.1.5ColumnhaServiceNewCfgTrigRemRealsread-createcurrentThe real server to be removed to the group. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.5.2.1.6ColumnhaServiceNewCfgTrigRealTrkAutoOptStateread-onlycurrentThe AutoOpt Flag.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.6TablehaServiceRealTablenot-accessiblecurrentThe table of Real to HA group.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.6.1RowhaServiceRealEntrynot-accessiblecurrentInformation about a Real to HA group.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.6.1.1ColumnhaServiceGrpIndexread-onlycurrentThe service ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.8.6.6.1.2ColumnhaServiceRealIndexread-onlycurrentThe Real ID number in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.1.21.9NodehaTrunk
1.3.6.1.4.1.1872.2.5.3.1.21.9.2TablehaTrunkCurCfgTablenot-accessiblecurrentThe table of HA Trunk UP criteria configuration.
1.3.6.1.4.1.1872.2.5.3.1.21.9.2.1RowhaTrunkCurCfgTableEntrynot-accessiblecurrentA row in the HA Trunk UP criteria configuration table.
1.3.6.1.4.1.1872.2.5.3.1.21.9.2.1.1ColumnhaTrunkCurCfgIndexread-onlycurrentThe Trunk id.
1.3.6.1.4.1.1872.2.5.3.1.21.9.2.1.2ColumnhaTrunkCurCfgTrunkUpCriteriaread-onlycurrentThe minimum number of port up criteria for the trunk.
1.3.6.1.4.1.1872.2.5.3.1.21.9.3TablehaTrunkNewCfgTablenot-accessiblecurrentThe table of HA Trunk UP criteria configuration.
1.3.6.1.4.1.1872.2.5.3.1.21.9.3.1RowhaTrunkNewCfgTableEntrynot-accessiblecurrentA row in the HA Trunk UP criteria configuration table.
1.3.6.1.4.1.1872.2.5.3.1.21.9.3.1.1ColumnhaTrunkNewCfgIndexread-onlycurrentThe Trunk id.
1.3.6.1.4.1.1872.2.5.3.1.21.9.3.1.2ColumnhaTrunkNewCfgTrunkUpCriteriaread-createcurrentThe minimum number of port up criteria for the trunk.
1.3.6.1.4.1.1872.2.5.3.1.21.9.3.1.3ColumnhaTrunkNewCfgTrunkRemoveread-createcurrentRemove the minimum number of port up criteria for the trunk.
1.3.6.1.4.1.1872.2.5.3.1.21.9.100ScalarhaTrunkTableMaxSizeread-onlycurrentThe maximum number of entries in HA trunk table.
1.3.6.1.4.1.1872.2.5.3.1.21.10NodehaLacp
1.3.6.1.4.1.1872.2.5.3.1.21.10.3TablehaLacpCurCfgTablenot-accessiblecurrentThe table of HA Lacp UP criteria configuration. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.21.10.3.1RowhaLacpCurCfgTableEntrynot-accessiblecurrentA row in the HA Lacp UP criteria configuration table.
1.3.6.1.4.1.1872.2.5.3.1.21.10.3.1.1ColumnhaLacpCurCfgAdminKeyread-onlycurrentThe Lacp Admin key id.
1.3.6.1.4.1.1872.2.5.3.1.21.10.3.1.2ColumnhaLacpCurCfgLacpUpCriteriaread-onlycurrentThe minimum number of port up criteria for the LACP admin key.
1.3.6.1.4.1.1872.2.5.3.1.21.10.4TablehaLacpNewCfgTablenot-accessiblecurrentThe table of HA Lacp UP criteria configuration. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.21.10.4.1RowhaLacpNewCfgTableEntrynot-accessiblecurrentA row in the HA Lacp UP criteria configuration table.
1.3.6.1.4.1.1872.2.5.3.1.21.10.4.1.1ColumnhaLacpNewCfgAdminKeyread-onlycurrentThe Lacp Admin key id.
1.3.6.1.4.1.1872.2.5.3.1.21.10.4.1.2ColumnhaLacpNewCfgLacpUpCriteriaread-createcurrentThe minimum number of port up criteria for the LACP admin key.
1.3.6.1.4.1.1872.2.5.3.1.21.10.4.1.3ColumnhaLacpNewCfgLacpRemoveread-createcurrentRemove the minimum number of port up criteria for the LACP admin key.
1.3.6.1.4.1.1872.2.5.3.1.21.10.101ScalarhaLacpTableMaxSizeread-onlycurrentThe maximum number of entries in the HA LACP adminkey configuration table. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.21.10.102ScalarhaLacpMaxAdminKeyread-onlycurrentThe maximum possible LACP admin key value. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.21.11ScalarhaCurLPWizardCfgModeread-onlycurrentChange the High Availability Mode from the LP startup wizard. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.21.12ScalarhaNewLPWizardCfgModeread-writecurrentChange the High Availability Mode from the LP startup wizard. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.21.13ScalarhaCurCfgHAIDread-writecurrentThe HA ID for standalone device.
1.3.6.1.4.1.1872.2.5.3.1.21.14ScalarhaNewCfgHAIDread-writecurrentThe HA ID for standalone device. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.21.15ScalarhaCurCfgBkpVipRtread-onlycurrentEnable or disable adding vip routes in backup device. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.21.16ScalarhaNewCfgBkpVipRtread-writecurrentEnable or disable adding vip routes in backup device. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.21.17ScalarhaCurCfgFmacread-onlycurrentEnable or Disable floating mac.
1.3.6.1.4.1.1872.2.5.3.1.21.18ScalarhaNewCfgFmacread-writecurrentEnable or Disable floating mac.
1.3.6.1.4.1.1872.2.5.3.1.21.19ScalarhaCurCfgNwClGarpread-onlycurrentEnable or disable sending GARP for all the proxy IPs in the network class range. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.21.20ScalarhaNewCfgNwClGarpread-writecurrentEnable or disable sending GARP for all the proxy IPs in the network class range. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.21.21ScalarhaCurCfgFailoverTimeread-onlycurrentThe Failover delay time.
1.3.6.1.4.1.1872.2.5.3.1.21.22ScalarhaNewCfgFailoverTimeread-writecurrentThe Failover delay time.
1.3.6.1.4.1.1872.2.5.3.1.22Nodeipv6StaticNbrCfg
1.3.6.1.4.1.1872.2.5.3.1.22.1Scalaripv6StaticNbrTableMaxSizeread-onlycurrentThe maximum number of rows in the IPv6 Static Neighbor table.
1.3.6.1.4.1.1872.2.5.3.1.22.2Tableipv6CurCfgStaticNbrTablenot-accessiblecurrentThe table of static IPv6 Neighbors in the current configuration block.
1.3.6.1.4.1.1872.2.5.3.1.22.2.1Rowipv6CurCfgStaticNbrEntrynot-accessiblecurrentA row in the static IPv6 NBR table
1.3.6.1.4.1.1872.2.5.3.1.22.2.1.1Columnipv6CurCfgStaticNbrIndxread-onlycurrentThe index of static IPv6 NBR table.
1.3.6.1.4.1.1872.2.5.3.1.22.2.1.2Columnipv6CurCfgStaticNbrIpv6Addrread-onlycurrentThe IPv6 address for the static IPv6 NBR entry.
1.3.6.1.4.1.1872.2.5.3.1.22.2.1.3Columnipv6CurCfgStaticNbrMACread-onlycurrentThe MAC address for the static IPv6 NBR entry.
1.3.6.1.4.1.1872.2.5.3.1.22.2.1.4Columnipv6CurCfgStaticNbrVlanread-onlycurrentThe VLAN for the static IPv6 NBR entry.
1.3.6.1.4.1.1872.2.5.3.1.22.2.1.5Columnipv6CurCfgStaticNbrPortread-onlycurrentThe port for the static IPv6 NBR entry.
1.3.6.1.4.1.1872.2.5.3.1.22.3Tableipv6NewCfgStaticNbrTablenot-accessiblecurrentThe table of static IPv6 Neighbors in the New configuration block.
1.3.6.1.4.1.1872.2.5.3.1.22.3.1Rowipv6NewCfgStaticNbrEntrynot-accessiblecurrentA row in the static IPv6 NBR table
1.3.6.1.4.1.1872.2.5.3.1.22.3.1.1Columnipv6NewCfgStaticNbrIndxread-createcurrentThe index of static IPv6 NBR table.
1.3.6.1.4.1.1872.2.5.3.1.22.3.1.2Columnipv6NewCfgStaticNbrIpv6Addrread-createcurrentThe IPv6 address for the static IPv6 NBR entry.
1.3.6.1.4.1.1872.2.5.3.1.22.3.1.3Columnipv6NewCfgStaticNbrMACread-createcurrentThe MAC address for the static IPv6 NBR entry.
1.3.6.1.4.1.1872.2.5.3.1.22.3.1.4Columnipv6NewCfgStaticNbrVlanread-createcurrentThe VLAN for the static IPv6 NBR entry.
1.3.6.1.4.1.1872.2.5.3.1.22.3.1.5Columnipv6NewCfgStaticNbrPortread-createcurrentThe port for the static IPv6 NBR entry.
1.3.6.1.4.1.1872.2.5.3.1.22.3.1.6Columnipv6NewCfgStaticNbrActionread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.1872.2.5.3.1.22.4Scalaripv6StaticNbrTableNextAvailableIndexread-onlycurrentThe next available index in the static IPv6 NBR table.
1.3.6.1.4.1.1872.2.5.3.1.23NodebfdCfg
1.3.6.1.4.1.1872.2.5.3.1.23.1ScalarbfdCurCfgStateread-onlycurrentBFD global state. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.23.2ScalarbfdNewCfgStateread-writecurrentGlobally turn BFD on or off. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.23.3ScalarbfdCurCfgRxIntervalread-onlycurrentBFD control packets Rx interval (in milliseconds). Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.23.4ScalarbfdNewCfgRxIntervalread-writecurrentBFD control packets Rx interval (in milliseconds). Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.23.5ScalarbfdCurCfgMultiplierread-onlycurrentNumber of retries to declare the BFD neighbour DOWN. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.23.6ScalarbfdNewCfgMultiplierread-writecurrentNumber of retries to declare the BFD neighbour DOWN. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.23.7ScalarbfdCurCfgIfBmapread-onlycurrentBitmap of interfaces currently configured for BFD in the device. OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ If 9 || || || ||___ If 8 || |____ If 7 …
1.3.6.1.4.1.1872.2.5.3.1.23.8ScalarbfdNewCfgIfBmapread-onlycurrentBitmap of interfaces newly configured for BFD in the device i.e in new config (before apply). OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ If 9 || ||…
1.3.6.1.4.1.1872.2.5.3.1.23.9ScalarbfdNewCfgAddIfread-writecurrentAdd BFD interface. Returns 0 on SNMPGET. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.23.10ScalarbfdNewCfgRemIfread-writecurrentRemove BFD interface. Returns 0 on SNMPGET. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.1.24NodeipTunnelCfg
1.3.6.1.4.1.1872.2.5.3.1.24.2TableipTunnelCurCfgTablenot-accessiblecurrentThe table of ip tunnels configuration in the Current Configuration Block.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1RowipTunnelCurCfgEntrynot-accessiblecurrentA row in the IP tunnel table
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.1ColumnipTunnelCurCfgIdread-onlycurrentThe IP tunnel number for which the information is related.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.2ColumnipTunnelCurCfgIndexread-onlycurrentThe tunnel local index
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.3ColumnipTunnelCurCfgStateread-onlycurrentEnable or Disable the IP tunnel interface.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.4ColumnipTunnelCurCfgLocalModeread-onlycurrentThe tunnel local address mode.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.5ColumnipTunnelCurCfgLocalIfIdread-onlycurrentThe tunnel local address.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.6ColumnipTunnelCurCfgLocalVrIdread-onlycurrentThe tunnel local address.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.7ColumnipTunnelCurCfgLocalHaNameread-onlycurrentThe tunnel local HA id.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.8ColumnipTunnelCurCfgIpVerread-onlycurrentThe type of IP address.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.9ColumnipTunnelCurCfgIpVerMatchread-onlycurrentThe type of IP address of the egress match criteria.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.10ColumnipTunnelCurCfgRemoteAddr4read-onlycurrentThe remote tunnel IP address.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.11ColumnipTunnelCurCfgRemoteAddr6read-onlycurrentThe remote tunnel IPv6 address. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:…
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.12ColumnipTunnelCurCfgMatchread-onlycurrentThe match criteria IP address.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.13ColumnipTunnelCurCfgMatch6read-onlycurrentThe match criteria IPv6 address. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx…
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.14ColumnipTunnelCurCfgTyperead-onlycurrentThe type of IP tunnel interface.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.15ColumnipTunnelCurCfgDescriptionread-onlycurrentThe descriptive tunnel name.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.16ColumnipTunnelCurCfgGreKeyread-onlycurrentThe GRE tunnel key param.
1.3.6.1.4.1.1872.2.5.3.1.24.2.1.17ColumnipTunnelCurCfgInnerLocalIfIdread-onlycurrentThe tunnel local address.
1.3.6.1.4.1.1872.2.5.3.1.24.3TableipTunnelNewCfgTablenot-accessiblecurrentThe table of ip tunnels configuration in the New Configuration Block.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1RowipTunnelNewCfgEntrynot-accessiblecurrentA row in the IP tunnel table
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.1ColumnipTunnelNewCfgIdread-onlycurrentThe IP tunnel number for which the information is related.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.2ColumnipTunnelNewCfgIndexread-createcurrentThe tunnel Index.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.3ColumnipTunnelNewCfgStateread-createcurrentEnable or Disable the IP tunnel interface.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.4ColumnipTunnelNewCfgLocalModeread-createcurrentThe tunnel local address mode.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.5ColumnipTunnelNewCfgLocalIfIdread-createcurrentThe tunnel local address.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.6ColumnipTunnelNewCfgLocalVrIdread-createcurrentThe tunnel local address.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.7ColumnipTunnelNewCfgLocalHaNameread-createcurrentThe tunnel local HA id.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.8ColumnipTunnelNewCfgIpVerread-createcurrentThe type of IP address.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.9ColumnipTunnelNewCfgIpVerMatchread-createcurrentThe type of IP address of the egress match criteria.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.10ColumnipTunnelNewCfgDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.11ColumnipTunnelNewCfgRemoteAddr4read-createcurrentThe remote tunnel IP address.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.12ColumnipTunnelNewCfgRemoteAddr6read-createcurrentThe remote tunnel IPv6 address. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:…
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.13ColumnipTunnelNewCfgMatchread-createcurrentThe match criteria IP address.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.14ColumnipTunnelNewCfgMatch6read-createcurrentThe match criteria IPv6 address. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx…
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.15ColumnipTunnelNewCfgTyperead-createcurrentThe type of IP tunnel interface.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.16ColumnipTunnelNewCfgDescriptionread-createcurrentThe descriptive tunnel name.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.17ColumnipTunnelNewCfgGreKeyread-createcurrentThe GRE tunnel key param.
1.3.6.1.4.1.1872.2.5.3.1.24.3.1.18ColumnipTunnelNewCfgInnerLocalIfIdread-createcurrentThe tunnel local inner address.
1.3.6.1.4.1.1872.2.5.3.2Nodelayer3Stats
1.3.6.1.4.1.1872.2.5.3.2.1NoderipStats
1.3.6.1.4.1.1872.2.5.3.2.1.1ScalarripStatInPktsread-onlycurrentThe total number of good RIPv1 packets received. RIPv1 mibs are not supported anymore.
1.3.6.1.4.1.1872.2.5.3.2.1.2ScalarripStatOutPktsread-onlycurrentThe total number of RIPv1 packets transmitted. RIPv1 mibs are not supported anymore.
1.3.6.1.4.1.1872.2.5.3.2.1.3ScalarripStatInErrorPktsread-onlycurrentThe total number of error RIPv1 packets received. RIPv1 mibs are not supported anymore.
1.3.6.1.4.1.1872.2.5.3.2.1.4ScalarripStatRoutesAgedOutread-onlycurrentThe total number of RIPv1 routes which have aged out. RIPv1 mibs are not supported anymore.
1.3.6.1.4.1.1872.2.5.3.2.2NodearpStats
1.3.6.1.4.1.1872.2.5.3.2.2.1ScalararpStatEntriesread-onlycurrentThe current number of ARP entries.
1.3.6.1.4.1.1872.2.5.3.2.2.2ScalararpStatHighWaterread-onlycurrentThe highest number of ARP entries.
1.3.6.1.4.1.1872.2.5.3.2.2.3ScalararpStatMaxEntriesread-onlycurrentThe maximum number of ARP entries.
1.3.6.1.4.1.1872.2.5.3.2.2.4TablearpSpStatsTablenot-accessiblecurrentThe table of ARP SP Stats.
1.3.6.1.4.1.1872.2.5.3.2.2.4.1RowarpSpStatsTableEntrynot-accessiblecurrentA row in the ARP SP stats table.
1.3.6.1.4.1.1872.2.5.3.2.2.4.1.1ColumnarpSpStatSpIndexread-onlycurrentThe SP index.
1.3.6.1.4.1.1872.2.5.3.2.2.4.1.2ColumnarpSpStatEntriesread-onlycurrentThe current number of SP ARP entries.
1.3.6.1.4.1.1872.2.5.3.2.2.4.1.3ColumnarpSpStatHighWaterread-onlycurrentThe highest number of SP ARP entries.
1.3.6.1.4.1.1872.2.5.3.2.2.4.1.4ColumnarpSpStatMaxEntriesread-onlycurrentThe maximum number of SP ARP entries.
1.3.6.1.4.1.1872.2.5.3.2.3NoderouteStats
1.3.6.1.4.1.1872.2.5.3.2.3.1ScalarrouteStatEntriesread-onlycurrentThe current number of IP routes.
1.3.6.1.4.1.1872.2.5.3.2.3.2ScalarrouteStatHighWaterread-onlycurrentThe highest number of IP routes.
1.3.6.1.4.1.1872.2.5.3.2.3.3ScalarrouteStatMaxEntriesread-onlycurrentThe maximum number of IP routes.
1.3.6.1.4.1.1872.2.5.3.2.4NodednsStats
1.3.6.1.4.1.1872.2.5.3.2.4.1ScalardnsStatInGoodDnsRequestsread-onlycurrentThe total number of DNS request packets which are received.
1.3.6.1.4.1.1872.2.5.3.2.4.2ScalardnsStatInBadDnsRequestsread-onlycurrentThe total number of DNS request packets received that were dropped.
1.3.6.1.4.1.1872.2.5.3.2.4.3ScalardnsStatOutDnsRequestsread-onlycurrentThe total number of DNS response packets that have been transmitted.
1.3.6.1.4.1.1872.2.5.3.2.5NodevrrpStats
1.3.6.1.4.1.1872.2.5.3.2.5.1ScalarvrrpStatInAdversread-onlycurrentThe number of good VRRP advertisements which are received.
1.3.6.1.4.1.1872.2.5.3.2.5.2ScalarvrrpStatOutAdversread-onlycurrentThe number of good VRRP advertisements which are transmitted.
1.3.6.1.4.1.1872.2.5.3.2.5.3ScalarvrrpStatOutBadAdversread-onlycurrentThe number of bad VRRP advertisements which are received.
1.3.6.1.4.1.1872.2.5.3.2.5.4ScalarvrrpStatBadPasswordread-onlycurrentThe number of bad VRRP password.
1.3.6.1.4.1.1872.2.5.3.2.5.5ScalarvrrpStatBadVersionread-onlycurrentThe number of bad VRRP version which are received.
1.3.6.1.4.1.1872.2.5.3.2.5.6ScalarvrrpStatBadVridread-onlycurrentThe number of bad VRRP VR id which are received.
1.3.6.1.4.1.1872.2.5.3.2.5.7ScalarvrrpStatBadAddressread-onlycurrentThe number of bad VRRP address which are received.
1.3.6.1.4.1.1872.2.5.3.2.5.8ScalarvrrpStatBadDataread-onlycurrentThe number of bad VRRP data which are received.
1.3.6.1.4.1.1872.2.5.3.2.5.9ScalarvrrpStatBadIntervalread-onlycurrentThe number of bad VRRP Interval which are received.
1.3.6.1.4.1.1872.2.5.3.2.5.10ScalarvrrpStatBadHaidread-onlycurrentThe number of bad VRRP Haid which are received.
1.3.6.1.4.1.1872.2.5.3.2.6NodeospfStats
1.3.6.1.4.1.1872.2.5.3.2.6.1NodeospfGeneralStats
1.3.6.1.4.1.1872.2.5.3.2.6.1.1NodeospfCumRxTxStats
1.3.6.1.4.1.1872.2.5.3.2.6.1.1.1ScalarospfCumRxPktsread-onlycurrentThe sum total of all OSPF packets received on all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.1.2ScalarospfCumTxPktsread-onlycurrentThe sum total of all OSPF packets transmitted on all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.1.3ScalarospfCumRxHelloread-onlycurrentThe sum total of all Hello packets received on all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.1.4ScalarospfCumTxHelloread-onlycurrentThe sum total of all Hello packets transmitted on all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.1.5ScalarospfCumRxDatabaseread-onlycurrentThe sum total of all Database Description packets received on all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.1.6ScalarospfCumTxDatabaseread-onlycurrentThe sum total of all Database Description packets transmitted on all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.1.7ScalarospfCumRxlsReqsread-onlycurrentThe sum total of all Link State Request packets received on all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.1.8ScalarospfCumTxlsReqsread-onlycurrentThe sum total of all Link State Request packets transmitted on all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.1.9ScalarospfCumRxlsAcksread-onlycurrentThe sum total of all Link State Acknowledgement packets received on all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.1.10ScalarospfCumTxlsAcksread-onlycurrentThe sum total of all Link State Acknowledgement packets transmitted on all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.1.11ScalarospfCumRxlsUpdatesread-onlycurrentThe sum total of all Link State Update packets received on all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.1.12ScalarospfCumTxlsUpdatesread-onlycurrentThe sum total of all Link State Update packets transmitted on all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.2NodeospfCumNbrChangeStats
1.3.6.1.4.1.1872.2.5.3.2.6.1.2.1ScalarospfCumNbrhelloread-onlycurrentThe sum total of all Hello packets received from neighbours on all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.2.2ScalarospfCumNbrStartread-onlycurrentThe sum total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval secon…
1.3.6.1.4.1.1872.2.5.3.2.6.1.2.3ScalarospfCumNbrAdjointOkread-onlycurrentThe sum total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour across all OSPF areas and i…
1.3.6.1.4.1.1872.2.5.3.2.6.1.2.4ScalarospfCumNbrNegotiationDoneread-onlycurrentThe sum total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, across al…
1.3.6.1.4.1.1872.2.5.3.2.6.1.2.5ScalarospfCumNbrExchangeDoneread-onlycurrentThe sum total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, acro…
1.3.6.1.4.1.1872.2.5.3.2.6.1.2.6ScalarospfCumNbrBadRequestsread-onlycurrentThe sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across all interfaces and OSP…
1.3.6.1.4.1.1872.2.5.3.2.6.1.2.7ScalarospfCumNbrBadSequenceread-onlycurrentThe sum total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init …
1.3.6.1.4.1.1872.2.5.3.2.6.1.2.8ScalarospfCumNbrLoadingDoneread-onlycurrentThe sum total number of link state updates received for all out-of-date portions of the database across all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.2.9ScalarospfCumNbrN1wayread-onlycurrentThe sum total number of Hello packets received from neighbours, in which this router is not mentioned across all OSPF interfaces and areas.
1.3.6.1.4.1.1872.2.5.3.2.6.1.2.10ScalarospfCumNbrRstAdread-onlycurrentThe sum total number of times the Neighbour adjacency has been reset across all OPSF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.2.11ScalarospfCumNbrDownread-onlycurrentThe total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) across all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.2.12ScalarospfCumNbrN2wayread-onlycurrentThe sum total number of Hello packets received from neighbours, in which this router is mentioned across all OSPF interfaces and areas.
1.3.6.1.4.1.1872.2.5.3.2.6.1.3NodeospfCumIntfChangeStats
1.3.6.1.4.1.1872.2.5.3.2.6.1.3.1ScalarospfCumIntfHelloread-onlycurrentThe sum total number of Hello packets sent on all interfaces and areas
1.3.6.1.4.1.1872.2.5.3.2.6.1.3.2ScalarospfCumIntfDownread-onlycurrentThe sum total number of interfaces down in all OSPF areas.
1.3.6.1.4.1.1872.2.5.3.2.6.1.3.3ScalarospfCumIntfLoopread-onlycurrentThe sum total of interfaces no longer connected to the attatched network across all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.3.4ScalarospfCumIntfUnloopread-onlycurrentThe sum total number of interfaces, connected to the attatched network in all OSPF areas.
1.3.6.1.4.1.1872.2.5.3.2.6.1.3.5ScalarospfCumIntfWaitTimerread-onlycurrentThe sum total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated R…
1.3.6.1.4.1.1872.2.5.3.2.6.1.3.6ScalarospfCumIntfBackupread-onlycurrentThe sum total number of Backup Designated Routers on the attatched network for all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.3.7ScalarospfCumIntfNbrChangeread-onlycurrentThe sum total number of changes in the set of bidirectional neighbours associated with any interface across all OSPF areas.
1.3.6.1.4.1.1872.2.5.3.2.6.1.4NodeospfTimersKickOffStats
1.3.6.1.4.1.1872.2.5.3.2.6.1.4.1ScalarospfTmrsKckOffHelloread-onlycurrentThe sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.4.2ScalarospfTmrsKckOffRetransmitread-onlycurrentThe sum total number of times the Retransmit timer has been fired across all OPSF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.4.3ScalarospfTmrsKckOffLsaLockread-onlycurrentThe sum total number of times the Lsa Lock timer has been fired across all OSPF areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.4.4ScalarospfTmrsKckOffLsaAckread-onlycurrentThe sum total number of times the Lsa Ack timer has been fired across all ospf areas and interfaces.
1.3.6.1.4.1.1872.2.5.3.2.6.1.4.5ScalarospfTmrsKckOffDbageread-onlycurrentThe total number of times the Dbage has been fired.
1.3.6.1.4.1.1872.2.5.3.2.6.1.4.6ScalarospfTmrsKckOffSummaryread-onlycurrentThe total number of times the Summary timer has been fired.
1.3.6.1.4.1.1872.2.5.3.2.6.1.4.7ScalarospfTmrsKckOffAseExportread-onlycurrentThe total number of times the ASE Export timer has been fired.
1.3.6.1.4.1.1872.2.5.3.2.6.2NodeospfArea
1.3.6.1.4.1.1872.2.5.3.2.6.2.1TableospfAreaRxTxStatsnot-accessiblecurrentThe table of OSPF Area Rx/Tx Statistics.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1RowospfAreaRxTxStatsEntrynot-accessiblecurrentRx Tx packet Statistics about a OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.1ColumnospfAreaRxTxIndexread-onlycurrentThe index of the ospf Area for which these statistics apply.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.2ColumnospfAreaRxPktsread-onlycurrentThe total number of OSPF packets received in this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.3ColumnospfAreaTxPktsread-onlycurrentThe total number of OSPF packets transmitted in this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.4ColumnospfAreaRxHelloread-onlycurrentThe total number of Hello packets received in this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.5ColumnospfAreaTxHelloread-onlycurrentThe total number of Hello packets transmitted in this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.6ColumnospfAreaRxDatabaseread-onlycurrentThe total number of Database Description packets transmitted for this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.7ColumnospfAreaTxDatabaseread-onlycurrentThe total number of Database Description packets transmitted for this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.8ColumnospfAreaRxlsReqsread-onlycurrentThe total number of Link State Request packets received for this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.9ColumnospfAreaTxlsReqsread-onlycurrentThe total number of Link State Request packets transmitted for this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.10ColumnospfAreaRxlsAcksread-onlycurrentThe total number of Link State Acknowledgement packets received for this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.11ColumnospfAreaTxlsAcksread-onlycurrentThe total number of Link State Acknowledgement packets transmitted for this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.12ColumnospfAreaRxlsUpdatesread-onlycurrentThe total number of Link State Update packets received for this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.13ColumnospfAreaTxlsUpdatesread-onlycurrentThe total number of Link State Update packets transmitted for this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.2TableospfAreaNbrChangeStatsnot-accessiblecurrentThe table of OSPF Area Neighbour Statistics.
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1RowospfAreaNbrChangeStatsEntrynot-accessiblecurrentArea Neighbour Change Statistics about a OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.1ColumnospfAreaNbrIndexread-onlycurrentThe index of the ospf Area for which these statistics apply.
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.2ColumnospfAreaNbrhelloread-onlycurrentThe total number of Hello packets received from neighbours in this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.3ColumnospfAreaNbrStartread-onlycurrentThe total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.)…
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.4ColumnospfAreaNbrAdjointOkread-onlycurrentThe total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.5ColumnospfAreaNbrNegotiationDoneread-onlycurrentThe total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF…
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.6ColumnospfAreaNbrExchangeDoneread-onlycurrentThe total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this…
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.7ColumnospfAreaNbrBadRequestsread-onlycurrentThe sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.8ColumnospfAreaNbrBadSequenceread-onlycurrentThe total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit …
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.9ColumnospfAreaNbrLoadingDoneread-onlycurrentThe total number of link state updates received for all out-of-date portions of the database in this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.10ColumnospfAreaNbrN1wayread-onlycurrentThe total number of Hello packets received from neighbours, in which this router is not mentioned in this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.11ColumnospfAreaNbrRstAdread-onlycurrentThe total number of times the Neighbour adjacency has been reset across this OPSF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.12ColumnospfAreaNbrDownread-onlycurrentThe total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) in this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.13ColumnospfAreaNbrN2wayread-onlycurrentThe total number of Hello packets received from neighbours, in which this router is mentioned in this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.3TableospfAreaChangeStatsnot-accessiblecurrentThe table of OSPF Area Change Statistics.
1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1RowospfAreaChangeStatsEntrynot-accessiblecurrentArea Change Statistics about a OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.1ColumnospfAreaIntfIndexread-onlycurrentThe index of the OSPF Area for which these statistics apply.
1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.2ColumnospfAreaIntfHelloread-onlycurrentThe total number of Hello packets sent on this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.3ColumnospfAreaIntfDownread-onlycurrentThe total number of interfaces down in this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.4ColumnospfAreaIntfLoopread-onlycurrentThe total number of interfaces no longer connected to the attatched network in this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.5ColumnospfAreaIntfUnloopread-onlycurrentThe total number of interfaces connected to the attatched network in this OSPF area..
1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.6ColumnospfAreaIntfWaitTimerread-onlycurrentThe total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Route…
1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.7ColumnospfAreaIntfBackupread-onlycurrentThe total number of Backup Designated Routers on the attatched network for this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.8ColumnospfAreaIntfNbrChangeread-onlycurrentThe total number of changes in the set of bidirectional neighbours associated with the interface in this OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.4TableospfAreaErrorStatsnot-accessiblecurrentThe table of OSPF Area Error Statistics.
1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1RowospfAreaErrorStatsEntrynot-accessiblecurrentError Statistics for an OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.1ColumnospfAreaErrIndexread-onlycurrentThe index of the OSPF Area for which these statistics apply.
1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.2ColumnospfAreaErrAuthFailureread-onlycurrentThe total number of packets received with a wrong password in this area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.3ColumnospfAreaErrNetmaskMismatchread-onlycurrentThe total number of packets received with a wrong netmask in this area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.4ColumnospfAreaErrHelloMismatchread-onlycurrentThe total number of packets received with a different hello interval in this area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.5ColumnospfAreaErrDeadMismatchread-onlycurrentThe total number of packets received with a different dead interval in this area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.6ColumnospfAreaErrOptionsMismatchread-onlycurrentThe total number of packets received with a different options in this area.
1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.7ColumnospfAreaErrUnknownNbrread-onlycurrentThe total number of packets received from an unknown neighbour in this area.
1.3.6.1.4.1.1872.2.5.3.2.6.3NodeospfInterface
1.3.6.1.4.1.1872.2.5.3.2.6.3.1TableospfIntfRxTxStatsnot-accessiblecurrentThe table of OSPF Interface Rx/Tx packet Statistics.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1RowospfIntfRxTxStatsEntrynot-accessiblecurrentOSPF interface Rx/Tx packet statistics.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.1ColumnospfIntfRxTxIndexread-onlycurrentThe OSPF interface for which these statistics apply.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.2ColumnospfIntfRxPktsread-onlycurrentThe total number of OSPF packets received for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.3ColumnospfIntfTxPktsread-onlycurrentThe total number of OSPF packets transmitted for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.4ColumnospfIntfRxHelloread-onlycurrentThe total number of Hello packets received for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.5ColumnospfIntfTxHelloread-onlycurrentThe total number of Hello packets transmitted for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.6ColumnospfIntfRxDatabaseread-onlycurrentThe total number of Database Description packets received for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.7ColumnospfIntfTxDatabaseread-onlycurrentThe total number of Database Description packets transmitted for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.8ColumnospfIntfRxlsReqsread-onlycurrentThe total number of Link State Request packets received for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.9ColumnospfIntfTxlsReqsread-onlycurrentThe total number of Link State Request packets transmitted for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.10ColumnospfIntfRxlsAcksread-onlycurrentThe total number of Link State Acknowledgement packets received for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.11ColumnospfIntfTxlsAcksread-onlycurrentThe total number of Link State Acknowledgement packets transmitted for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.12ColumnospfIntfRxlsUpdatesread-onlycurrentThe total number of Link State Update packets received for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.13ColumnospfIntfTxlsUpdatesread-onlycurrentThe total number of Link State Update packets transmitted for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.2TableospfIntfNbrChangeStatsnot-accessiblecurrentThe table of OSPF Interface Neighbour change Statistics.
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1RowospfIntfNbrChangeStatsEntrynot-accessiblecurrentOSPF interface Neighbour Change statistics.
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.1ColumnospfIntfNbrIndexread-onlycurrentThe index of the OSPF Interface for which these statistics apply.
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.2ColumnospfIntfNbrhelloread-onlycurrentThe total number of Hello packets received from neighbours in this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.3ColumnospfIntfNbrStartread-onlycurrentThe total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.)…
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.4ColumnospfIntfNbrAdjointOkread-onlycurrentThe total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.5ColumnospfIntfNbrNegotiationDoneread-onlycurrentThe total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF…
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.6ColumnospfIntfNbrExchangeDoneread-onlycurrentThe total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this…
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.7ColumnospfIntfNbrBadRequestsread-onlycurrentThe total number of Link State Requests which have been received for a link state advertisement not contained in the database for this interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.8ColumnospfIntfNbrBadSequenceread-onlycurrentThe total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit …
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.9ColumnospfIntfNbrLoadingDoneread-onlycurrentThe total number of link state updates received for all out-of-date portions of the database for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.10ColumnospfIntfNbrN1wayread-onlycurrentThe total number of Hello packets received from neighbours, in which this router is not mentioned for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.11ColumnospfIntfNbrRstAdread-onlycurrentThe sum total number of times the Neighbour adjacency has been reset on this interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.12ColumnospfIntfNbrDownread-onlycurrentThe total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) for this interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.13ColumnospfIntfNbrN2wayread-onlycurrentThe total number of Hello packets received from neighbours, in which this router is mentioned for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.3TableospfIntfChangeStatsnot-accessiblecurrentThe table of OSPF Interface change Statistics.
1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1RowospfIntfChangeStatsEntrynot-accessiblecurrentOSPF interface Change statistics.
1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.1ColumnospfIntfIndexread-onlycurrentThe index of the OSPF Interface for which these statistics apply.
1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.2ColumnospfIntfHelloread-onlycurrentThe total number of Hello packets sent by this interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.3ColumnospfIntfDownread-onlycurrentThe total number of times the interface was down.
1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.4ColumnospfIntfLoopread-onlycurrentThe total number of times the interface was no longer connected to the attatched network.
1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.5ColumnospfIntfUnloopread-onlycurrentThe total number of times the interface, connected back to the attatched network.
1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.6ColumnospfIntfWaitTimerread-onlycurrentThe total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Route…
1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.7ColumnospfIntfBackupread-onlycurrentThe total number of Backup Designated Routers on the attatched network for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.8ColumnospfIntfNbrChangeread-onlycurrentThe total number of changes in the set of bidirectional neighbours associated with the interface for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.2.6.3.4TableospfIntfErrorStatsnot-accessiblecurrentThe table of OSPF Interface Error Statistics.
1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1RowospfIntfErrorStatsEntrynot-accessiblecurrentError Statistics for an OSPF area.
1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.1ColumnospfIntfErrIndexread-onlycurrentThe index of the OSPF Intf for which these statistics apply.
1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.2ColumnospfIntfErrAuthFailureread-onlycurrentThe total number of packets received with a wrong password in this area.
1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.3ColumnospfIntfErrNetmaskMismatchread-onlycurrentThe total number of packets received with a wrong netmask in this area.
1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.4ColumnospfIntfErrHelloMismatchread-onlycurrentThe total number of packets received with a different hello interval in this area.
1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.5ColumnospfIntfErrDeadMismatchread-onlycurrentThe total number of packets received with a different dead interval in this area.
1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.6ColumnospfIntfErrOptionsMismatchread-onlycurrentThe total number of packets received with a different options in this area.
1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.7ColumnospfIntfErrUnknownNbrread-onlycurrentThe total number of packets received from an unknown neighbour in this area.
1.3.6.1.4.1.1872.2.5.3.2.7NodeclearStats
1.3.6.1.4.1.1872.2.5.3.2.7.1ScalaripClearStatsread-writecurrentSetting this to clear(2) results in clearing the IP statistics.
1.3.6.1.4.1.1872.2.5.3.2.7.2TableifStatsTablenot-accessiblecurrentThe table of Interface Statistics.
1.3.6.1.4.1.1872.2.5.3.2.7.2.1RowifStatsEntrynot-accessiblecurrentIP Interface statistics.
1.3.6.1.4.1.1872.2.5.3.2.7.2.1.1ColumnifStatsIndexread-onlycurrentThe index of the IP interface for which these statistics apply.
1.3.6.1.4.1.1872.2.5.3.2.7.2.1.2ColumnifClearStatsread-writecurrentSetting this to clear(2) results in clearing the statistics for this IP interface (if) stats.
1.3.6.1.4.1.1872.2.5.3.2.7.3ScalarurlfClearStatsread-writecurrentSetting this to clear(2) results in clearing the URL Filtering statistics.
1.3.6.1.4.1.1872.2.5.3.2.7.4ScalartunelClearStatsread-writecurrentSetting this to clear(2) results in clearing the IP Tunnel statistics.
1.3.6.1.4.1.1872.2.5.3.2.10Nodeip6Stats
1.3.6.1.4.1.1872.2.5.3.2.10.1Scalarip6InReceivesread-onlycurrentThe total number of input datagrams received from interfaces, including those received in error.
1.3.6.1.4.1.1872.2.5.3.2.10.2Scalarip6ForwDatagramsread-onlycurrentThe number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the…
1.3.6.1.4.1.1872.2.5.3.2.10.3Scalarip6InDeliversread-onlycurrentThe total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
1.3.6.1.4.1.1872.2.5.3.2.10.4Scalarip6InDiscardsread-onlycurrentThe number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buff…
1.3.6.1.4.1.1872.2.5.3.2.10.5Scalarip6InUnknownProtosread-onlycurrentThe number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
1.3.6.1.4.1.1872.2.5.3.2.10.6Scalarip6InAddrErrorsread-onlycurrentThe number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity.
1.3.6.1.4.1.1872.2.5.3.2.10.7Scalarip6OutRequestsread-onlycurrentThe total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not in…
1.3.6.1.4.1.1872.2.5.3.2.10.8Scalarip6OutNoRoutesread-onlycurrentThe number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this Counter32 includes any packets count…
1.3.6.1.4.1.1872.2.5.3.2.10.9Scalarip6ReasmOKsread-onlycurrentThe number of IP datagrams successfully re-assembled.
1.3.6.1.4.1.1872.2.5.3.2.10.10Scalarip6ReasmFailsread-onlycurrentThe number of failures detected by the IP re-assembly.
1.3.6.1.4.1.1872.2.5.3.2.10.11Scalarip6icmpInMsgsread-onlycurrentThe total number of ICMP messages received. Note that this Counter32 includes all those counted by icmpInErrors.
1.3.6.1.4.1.1872.2.5.3.2.10.12Scalarip6icmpOutMsgsread-onlycurrentThe total number of ICMP messages attempted to send. Note that this Counter32 includes all those counted by icmp6OutErrors.
1.3.6.1.4.1.1872.2.5.3.2.10.13Scalarip6icmpInErrorsread-onlycurrentThe number of ICMP messages received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
1.3.6.1.4.1.1872.2.5.3.2.10.14Scalarip6icmpOutErrorsread-onlycurrentThe number of ICMP messages did not send due to problems discovered within ICMP such as a lack of buffers.
1.3.6.1.4.1.1872.2.5.3.2.11Nodeicmp6Stats
1.3.6.1.4.1.1872.2.5.3.2.11.1Tableicmp6StatsTablenot-accessiblecurrentStatistics for ICMP6.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1Rowicmp6StatsEntrynot-accessiblecurrentStatistics for IGMP Snooping.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.1Columnicmp6StatsIndxread-onlycurrentThe index of this statistics table.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.2Columnicmp6IntfIndexread-onlycurrentIP interface index in interface configuration table.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.3Columnicmp6InMsgsread-onlycurrentThe total number of ICMP messages received. Note that this Counter32 includes all those counted by icmpInErrors.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.4Columnicmp6InErrorsread-onlycurrentThe number of ICMP messages received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.5Columnicmp6InEchosread-onlycurrentThe number of ICMP Echo request messages received.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.6Columnicmp6InEchoRepsread-onlycurrentThe number of ICMP Echo Reply messages received.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.7Columnicmp6InNSsread-onlycurrentThe number of neighbour solicitations received.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.8Columnicmp6InNAsread-onlycurrentThe number of neighbour advertisements received.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.9Columnicmp6InRSsread-onlycurrentThe number of router solicitations received.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.10Columnicmp6InRAsread-onlycurrentThe number of router advertisements received.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.11Columnicmp6InDestUnreachsread-onlycurrentThe number of ICMP Destination Unreachable messages received.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.12Columnicmp6InTimeExcdsread-onlycurrentThe number of ICMP Time Exceeded messages received.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.13Columnicmp6InTooBigsread-onlycurrentThe number of ICMP too big messages received.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.14Columnicmp6InParmProbsread-onlycurrentThe number of ICMP Parameter Problem messages received.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.15Columnicmp6InRedirectsread-onlycurrentThe number of ICMP Redirect messages received.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.16Columnicmp6OutMsgsread-onlycurrentThe total number of ICMP messages which this entity attempted to send. Note that this Counter32 includes all those counted by icmp6OutErrors.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.17Columnicmp6OutErrorsread-onlycurrentThe number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.18Columnicmp6OutEchosread-onlycurrentThe number of ICMP Echo request messages sent.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.19Columnicmp6OutEchoRepsread-onlycurrentThe number of ICMP Echo Reply messages sent.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.20Columnicmp6OutNSsread-onlycurrentThe number of neighbour solicitations sent.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.21Columnicmp6OutNAsread-onlycurrentThe number of neighbour advertisements sent.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.22Columnicmp6OutRSsread-onlycurrentThe number of router solicitations sent.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.23Columnicmp6OutRAsread-onlycurrentThe number of router advertisements sent.
1.3.6.1.4.1.1872.2.5.3.2.11.1.1.24Columnicmp6OutRedirectsread-onlycurrentThe number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
1.3.6.1.4.1.1872.2.5.3.2.12Nodeip6gwStats
1.3.6.1.4.1.1872.2.5.3.2.12.1Tableip6GwStatsTablenot-accessiblecurrentStatistics for IP6 Gateway.
1.3.6.1.4.1.1872.2.5.3.2.12.1.1Rowip6GwStatsEntrynot-accessiblecurrentStatistics for IP6 Gateway.
1.3.6.1.4.1.1872.2.5.3.2.12.1.1.1Columnip6GwStatsIndexread-onlycurrentThe index of Gw6 statistics.
1.3.6.1.4.1.1872.2.5.3.2.12.1.1.2Columnip6GwIndexread-onlycurrentGateway index in gateway configuration table.
1.3.6.1.4.1.1872.2.5.3.2.12.1.1.3Columnip6GwEchoreqread-onlycurrentThe number of GW Echo request messages .
1.3.6.1.4.1.1872.2.5.3.2.12.1.1.4Columnip6GwEchorespread-onlycurrentThe number of GW Echo response messages .
1.3.6.1.4.1.1872.2.5.3.2.12.1.1.5Columnip6GwFailsread-onlycurrentThe number of GWs fails.
1.3.6.1.4.1.1872.2.5.3.2.12.1.1.6Columnip6GwMasterread-onlycurrentThe master gateway.
1.3.6.1.4.1.1872.2.5.3.2.12.1.1.7Columnip6IfIndexread-onlycurrentThe IP6 interface.
1.3.6.1.4.1.1872.2.5.3.2.12.1.1.8Columnip6GwRetryread-onlycurrentThe number of retries.
1.3.6.1.4.1.1872.2.5.3.2.13Noderip2Stats
1.3.6.1.4.1.1872.2.5.3.2.13.1ScalarripStatInPacketsread-onlycurrentThe total number of RIPv2 packets received.
1.3.6.1.4.1.1872.2.5.3.2.13.2ScalarripStatOutPacketsread-onlycurrentThe total number of RIPv2 packets transmitted.
1.3.6.1.4.1.1872.2.5.3.2.13.3ScalarripStatInRequestPktsread-onlycurrentThe total number of RIPv2 requests received.
1.3.6.1.4.1.1872.2.5.3.2.13.4ScalarripStatInResponsePktsread-onlycurrentThe total number of RIPv2 response received.
1.3.6.1.4.1.1872.2.5.3.2.13.5ScalarripStatOutRequestPktsread-onlycurrentThe total number of RIPv2 requests transmitted.
1.3.6.1.4.1.1872.2.5.3.2.13.6ScalarripStatOutResponsePktsread-onlycurrentThe total number of RIPv2 responses transmitted.
1.3.6.1.4.1.1872.2.5.3.2.13.7ScalarripStatRouteTimeoutread-onlycurrentThe total number of RIPv2 route timeouts.
1.3.6.1.4.1.1872.2.5.3.2.13.8ScalarripStatInBadSizePktsread-onlycurrentThe total number of bad size RIPv2 packets received.
1.3.6.1.4.1.1872.2.5.3.2.13.9ScalarripStatInBadVersionread-onlycurrentThe total number of RIPv2 bad versions received.
1.3.6.1.4.1.1872.2.5.3.2.13.10ScalarripStatInBadZerosread-onlycurrentThe total number of RIPv2 bad zeros received.
1.3.6.1.4.1.1872.2.5.3.2.13.11ScalarripStatInBadSourcePortread-onlycurrentThe total number of RIPv2 bad source port received.
1.3.6.1.4.1.1872.2.5.3.2.13.12ScalarripStatInBadSourceIPread-onlycurrentThe total number of RIPv2 bad source IP received.
1.3.6.1.4.1.1872.2.5.3.2.13.13ScalarripStatInSelfRcvPktsread-onlycurrentThe total number of RIPv2 packets from self received.
1.3.6.1.4.1.1872.2.5.3.2.14NodetcpStats
1.3.6.1.4.1.1872.2.5.3.2.14.1ScalartcpStatCurConnread-onlycurrentThe total number of outstanding TCP sessions that are currently opened.
1.3.6.1.4.1.1872.2.5.3.2.14.2ScalartcpStatCurInConnread-onlycurrentThe total number of remotely-initiated TCP connections.
1.3.6.1.4.1.1872.2.5.3.2.14.3ScalartcpStatCurOutConnread-onlycurrentThe total number of switch-originated TCP connection requests.
1.3.6.1.4.1.1872.2.5.3.2.15Nodeospfv3Stats
1.3.6.1.4.1.1872.2.5.3.2.15.1Nodeospfv3GeneralStats
1.3.6.1.4.1.1872.2.5.3.2.15.1.1Scalarospfv3StatsPackSentread-onlycurrentNo of packets sent.
1.3.6.1.4.1.1872.2.5.3.2.15.1.2Scalarospfv3PacketRxread-onlycurrentPacketRx stats.
1.3.6.1.4.1.1872.2.5.3.2.15.1.3Scalarospfv3RxPacketDropread-onlycurrentNum_rx_drop_packet.
1.3.6.1.4.1.1872.2.5.3.2.15.1.4Scalarospfv3TxPacketDropread-onlycurrentOspfv3 Num_Tx_drop_packet.
1.3.6.1.4.1.1872.2.5.3.2.15.1.5Scalarospfv3RxBadPacketread-onlycurrentOspfv3 num_rx_bad_packet.
1.3.6.1.4.1.1872.2.5.3.2.15.1.6Scalarospfv3SpfRunCountread-onlycurrentSPF stats.
1.3.6.1.4.1.1872.2.5.3.2.15.1.7Scalarospfv3LastSpfRunread-onlycurrentSPF stats for ospfv3.
1.3.6.1.4.1.1872.2.5.3.2.15.1.8Scalarospfv3LSDBtableSizeread-onlycurrentLSDB size for ospfv3.
1.3.6.1.4.1.1872.2.5.3.2.15.1.9Scalarospfv3BadLSReqCntread-onlycurrentBad LS req stats for ospfv3.
1.3.6.1.4.1.1872.2.5.3.2.15.1.10Scalarospfv3SeqMismatchCntread-onlycurrentSeq mismatch stats for ospfv3.
1.3.6.1.4.1.1872.2.5.3.2.16Nodevrrp6Stats
1.3.6.1.4.1.1872.2.5.3.2.16.1Scalarvrrp6StatInAdversread-onlycurrentThe number of good VRRP6 advertisements which are received.
1.3.6.1.4.1.1872.2.5.3.2.16.2Scalarvrrp6StatOutAdversread-onlycurrentThe number of good VRRP6 advertisements which are transmitted.
1.3.6.1.4.1.1872.2.5.3.2.16.3Scalarvrrp6StatOutBadAdversread-onlycurrentThe number of bad VRRP6 advertisements which are received.
1.3.6.1.4.1.1872.2.5.3.2.16.4Scalarvrrp6StatBadVersionread-onlycurrentThe number of bad VRRP6 version which are received.
1.3.6.1.4.1.1872.2.5.3.2.16.5Scalarvrrp6StatBadVridread-onlycurrentThe number of bad VRRP6 VR id which are received.
1.3.6.1.4.1.1872.2.5.3.2.16.6Scalarvrrp6StatBadAddressread-onlycurrentThe number of bad VRRP6 address which are received.
1.3.6.1.4.1.1872.2.5.3.2.16.7Scalarvrrp6StatBadDataread-onlycurrentThe number of bad VRRP7 data which are received.
1.3.6.1.4.1.1872.2.5.3.2.16.8Scalarvrrp6StatBadIntervalread-onlycurrentThe number of bad VRRP6 Interval which are received.
1.3.6.1.4.1.1872.2.5.3.2.16.9Scalarvrrp6StatBadHaidread-onlycurrentThe number of bad VRRP6 Haid which are received.
1.3.6.1.4.1.1872.2.5.3.2.17NodeipTunnelStats
1.3.6.1.4.1.1872.2.5.3.2.17.1TableipTunnelStatTablenot-accessiblecurrentThe IP Tunnel statistics table.
1.3.6.1.4.1.1872.2.5.3.2.17.1.1RowipTunnelStatEntrynot-accessiblecurrentThe statistics of IP Tunnel entry.
1.3.6.1.4.1.1872.2.5.3.2.17.1.1.1ColumnipTunnelStatIdread-onlycurrentThe IP tunnel number for which the information is related.
1.3.6.1.4.1.1872.2.5.3.2.17.1.1.2ColumnipTunnelStatIndexread-onlycurrentThe tunnel local index
1.3.6.1.4.1.1872.2.5.3.2.17.1.1.3ColumnipTunnelStatStateread-onlycurrentEnable or Disable the IP tunnel interface.
1.3.6.1.4.1.1872.2.5.3.2.17.1.1.4ColumnipTunnelStatTyperead-onlycurrentThe type of IP tunnel interface.
1.3.6.1.4.1.1872.2.5.3.2.17.1.1.5ColumnipTunnelStatDescriptionread-onlycurrentThe descriptive tunnel name.
1.3.6.1.4.1.1872.2.5.3.2.17.1.1.6ColumnipTunnelStatCurrSessread-onlycurrentThe number of sessions that are currently handled by IP Tunnel entry.
1.3.6.1.4.1.1872.2.5.3.2.17.1.1.7ColumnipTunnelStatTotSessread-onlycurrentTotal number of sessions that are handled by this IP Tunnel entry.
1.3.6.1.4.1.1872.2.5.3.2.17.1.1.8ColumnipTunnelStatHighSessread-onlycurrentThe highest number of sessions that are handled by this IP Tunnel entry.
1.3.6.1.4.1.1872.2.5.3.2.17.1.1.9ColumnipTunnelStatOctetsread-onlycurrentThe total octets that are handled by this IP Tunnel entry.
1.3.6.1.4.1.1872.2.5.3.3Nodelayer3Info
1.3.6.1.4.1.1872.2.5.3.3.1NodeipRoutingInfo
1.3.6.1.4.1.1872.2.5.3.3.1.1TableipRouteInfoTablenot-accessiblecurrentThe table of run-time IP routes.
1.3.6.1.4.1.1872.2.5.3.3.1.1.1RowipRouteInfoEntrynot-accessiblecurrentA row in the run-time IP route table
1.3.6.1.4.1.1872.2.5.3.3.1.1.1.1ColumnipRouteInfoIndxread-onlycurrentThe index of this route table.
1.3.6.1.4.1.1872.2.5.3.3.1.1.1.2ColumnipRouteInfoDestIpread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.1872.2.5.3.3.1.1.1.3ColumnipRouteInfoMaskread-onlycurrentThe destination IP mask of this route.
1.3.6.1.4.1.1872.2.5.3.3.1.1.1.4ColumnipRouteInfoGatewayread-onlycurrentThe next-hop router address for this route.
1.3.6.1.4.1.1872.2.5.3.3.1.1.1.5ColumnipRouteInfoTagread-onlycurrentThe tag-type for this route.
1.3.6.1.4.1.1872.2.5.3.3.1.1.1.6ColumnipRouteInfoTyperead-onlycurrentThe type of the route.
1.3.6.1.4.1.1872.2.5.3.3.1.1.1.7ColumnipRouteInfoInterfaceread-onlycurrentThe interface number for which the destination address is applicable.
1.3.6.1.4.1.1872.2.5.3.3.1.1.1.8ColumnipRouteInfoGateway1read-onlycurrentThe next-hop router address for this route.
1.3.6.1.4.1.1872.2.5.3.3.1.1.1.9ColumnipRouteInfoGateway2read-onlycurrentThe next-hop router address for this route.
1.3.6.1.4.1.1872.2.5.3.3.1.1.1.10ColumnipRouteInfoMetricread-onlycurrentThe Metric for this route.
1.3.6.1.4.1.1872.2.5.3.3.1.1.1.11ColumnipRouteInfoTunnelIdread-onlycurrentTunnel Id for this route.
1.3.6.1.4.1.1872.2.5.3.3.1.1.1.12ColumnipRouteInfoModeread-onlycurrentRoute mode - gateway or tunnel route.
1.3.6.1.4.1.1872.2.5.3.3.1.2ScalarrouteTableClearread-writecurrentSetting this value to clear(2) clears the route table.
1.3.6.1.4.1.1872.2.5.3.3.2NodearpInfo
1.3.6.1.4.1.1872.2.5.3.3.2.1TablearpInfoTablenot-accessiblecurrentThe table of ARP entries.
1.3.6.1.4.1.1872.2.5.3.3.2.1.1RowarpInfoEntrynot-accessiblecurrentA row in the ARP table
1.3.6.1.4.1.1872.2.5.3.3.2.1.1.1ColumnarpInfoDestIpread-onlycurrentThe destination IP address of the ARP entry.
1.3.6.1.4.1.1872.2.5.3.3.2.1.1.2ColumnarpInfoMacAddrread-onlycurrentThe MAC address for the ARP entry.
1.3.6.1.4.1.1872.2.5.3.3.2.1.1.3ColumnarpInfoVLANread-onlycurrentThe VLAN identifier for the ARP entry.
1.3.6.1.4.1.1872.2.5.3.3.2.1.1.4ColumnarpInfoSrcPortread-onlycurrentThe port number on which this entry's equivalence is effective.
1.3.6.1.4.1.1872.2.5.3.3.2.1.1.5ColumnarpInfoRefPortsread-onlycurrentThe mask of reference SPs associated with this ARP entry.
1.3.6.1.4.1.1872.2.5.3.3.2.1.1.6ColumnarpInfoFlagread-onlycurrentThe flag associated with this ARP entry.
1.3.6.1.4.1.1872.2.5.3.3.2.1.1.7ColumnarpInfoRefSPsread-onlycurrentThe reference SPs associated with this ARP entry.
1.3.6.1.4.1.1872.2.5.3.3.2.2ScalararpCacheClearread-writecurrentSetting this value to clear(2) clears the ARP cache.
1.3.6.1.4.1.1872.2.5.3.3.3NodevrrpInfo
1.3.6.1.4.1.1872.2.5.3.3.3.1TablevrrpInfoVirtRtrTablenot-accessiblecurrentThe table of VRRP virtual router run-time information.
1.3.6.1.4.1.1872.2.5.3.3.3.1.1RowvrrpInfoVirtRtrTableEntrynot-accessiblecurrentThe run-time information about a VRRP virtual router.
1.3.6.1.4.1.1872.2.5.3.3.3.1.1.1ColumnvrrpInfoVirtRtrIndexread-onlycurrentThe VRRP virtual router index.
1.3.6.1.4.1.1872.2.5.3.3.3.1.1.2ColumnvrrpInfoVirtRtrStateread-onlycurrentThe VRRP virtual router state.
1.3.6.1.4.1.1872.2.5.3.3.3.1.1.3ColumnvrrpInfoVirtRtrOwnershipread-onlycurrentThe VRRP virtual router ownership status.
1.3.6.1.4.1.1872.2.5.3.3.3.1.1.4ColumnvrrpInfoVirtRtrServerread-onlycurrentThe VRRP server state identifies virtual routers that support Layer 4 services.
1.3.6.1.4.1.1872.2.5.3.3.3.1.1.5ColumnvrrpInfoVirtRtrProxyread-onlycurrentThe VRRP proxy state identifies virtual proxy routers.
1.3.6.1.4.1.1872.2.5.3.3.3.1.1.6ColumnvrrpInfoVirtRtrPriorityread-onlycurrentThe VRRP virtual router priority.
1.3.6.1.4.1.1872.2.5.3.3.3.2ScalarvrrpInfoHAStateread-onlycurrentThe global VRRP or HA state
1.3.6.1.4.1.1872.2.5.3.3.4Nodeospfinfo
1.3.6.1.4.1.1872.2.5.3.3.4.1NodeospfGeneralInfo
1.3.6.1.4.1.1872.2.5.3.3.4.1.1ScalarospfStartTimeread-onlycurrentThe time when ospf has been started.
1.3.6.1.4.1.1872.2.5.3.3.4.1.2ScalarospfProcessUptimeread-onlycurrentThe time since ospf has been started.
1.3.6.1.4.1.1872.2.5.3.3.4.1.3ScalarospfLsTypesSupportedread-onlycurrentThe Link State Types that are supported.
1.3.6.1.4.1.1872.2.5.3.3.4.1.4ScalarospfIntfCountForRouterread-onlycurrentThe number of interfaces for this router.
1.3.6.1.4.1.1872.2.5.3.3.4.1.5ScalarospfVlinkCountForRouterread-onlycurrentThe number of virtual links for this router.
1.3.6.1.4.1.1872.2.5.3.3.4.1.6ScalarospfTotalNeighboursread-onlycurrentThe total number of OSPF neighbours.
1.3.6.1.4.1.1872.2.5.3.3.4.1.7ScalarospfNbrInInitStateread-onlycurrentThe number of neighbours in the initial state of exchange.
1.3.6.1.4.1.1872.2.5.3.3.4.1.8ScalarospfNbrInExchStateread-onlycurrentThe number of neighbours in the exchange state.
1.3.6.1.4.1.1872.2.5.3.3.4.1.9ScalarospfNbrInFullStateread-onlycurrentThe number of neighbours in the Full state of exchange.
1.3.6.1.4.1.1872.2.5.3.3.4.1.10ScalarospfTotalAreasread-onlycurrentThe Total number of areas.
1.3.6.1.4.1.1872.2.5.3.3.4.1.11ScalarospfTotalTransitAreasread-onlycurrentThe Total number of Transit areas.
1.3.6.1.4.1.1872.2.5.3.3.4.1.12ScalarospfTotalNssaAreasread-onlycurrentThe Total number of NSSA areas.
1.3.6.1.4.1.1872.2.5.3.3.4.2TableospfAreaInfoTablenot-accessiblecurrentThe table of OSPF Area information.
1.3.6.1.4.1.1872.2.5.3.3.4.2.1RowospfAreaInfoEntrynot-accessiblecurrentInformation about a OSPF area.
1.3.6.1.4.1.1872.2.5.3.3.4.2.1.1ColumnospfAreaInfoIndexread-onlycurrentThe OSPF area number for which the OSPF info table is related.
1.3.6.1.4.1.1872.2.5.3.3.4.2.1.2ColumnospfTotalNumberOfInterfacesread-onlycurrentThe total number of interfaces for this OSPF area.
1.3.6.1.4.1.1872.2.5.3.3.4.2.1.3ColumnospfNumberOfInterfacesUpread-onlycurrentThe number of interfaces UP in area.
1.3.6.1.4.1.1872.2.5.3.3.4.2.1.4ColumnospfNumberOfLsdbEntriesread-onlycurrentThe number of Link State Database entries for this OSPF area.
1.3.6.1.4.1.1872.2.5.3.3.4.2.1.5ColumnospfAreaInfoIdread-onlycurrentThe IP address of the OSPF area.
1.3.6.1.4.1.1872.2.5.3.3.4.3TableospfIntfInfoTablenot-accessiblecurrentThe table of OSPF Interface information.
1.3.6.1.4.1.1872.2.5.3.3.4.3.1RowospfIntfInfoEntrynot-accessiblecurrentInformation about a OSPF interface.
1.3.6.1.4.1.1872.2.5.3.3.4.3.1.1ColumnospfIfInfoIndexread-onlycurrentThe OSPF interface number for which the OSPF info table is related.
1.3.6.1.4.1.1872.2.5.3.3.4.3.1.2ColumnospfIfDesignatedRouterIPread-onlycurrentThe OSPF Designated Router ID (IP Address) for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.3.4.3.1.3ColumnospfIfBackupDesignatedRouterIPread-onlycurrentThe OSPF Backup Designated Router ID (IP Address) for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.3.4.3.1.4ColumnospfIfWaitIntervalread-onlycurrentThe OSPF Wait interval for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.3.4.3.1.5ColumnospfIfTotalNeighboursread-onlycurrentThe Total number of neighbours for this OSPF interface.
1.3.6.1.4.1.1872.2.5.3.3.4.3.1.6ColumnospfIfInfoIpAddressread-onlycurrentThe IP address of the OSPF interface.
1.3.6.1.4.1.1872.2.5.3.3.4.5TableospfIfNbrTablenot-accessiblecurrentThe table of OSPF Interface Neighbour information.
1.3.6.1.4.1.1872.2.5.3.3.4.5.1RowospfIfNbrEntrynot-accessiblecurrentInformation about a OSPF interface, neighbour pair.
1.3.6.1.4.1.1872.2.5.3.3.4.5.1.1ColumnospfIfNbrIntfIndexread-onlycurrentThe OSPF Interface number for which this Interface/Nbr table is related.
1.3.6.1.4.1.1872.2.5.3.3.4.5.1.2ColumnospfIfNbrIpAddrread-onlycurrentThe OSPF Neighbour ID .
1.3.6.1.4.1.1872.2.5.3.3.4.5.1.3ColumnospfIfNbrPriorityread-onlycurrentThe priority of the OSPF neighbour.
1.3.6.1.4.1.1872.2.5.3.3.4.5.1.4ColumnospfIfNbrStateread-onlycurrentThe state of the OSPF neighbour.
1.3.6.1.4.1.1872.2.5.3.3.4.5.1.5ColumnospfIfNbrDesignatedRtrread-onlycurrentThe IP Address of the Designated Router for this OSPF Neighbour.
1.3.6.1.4.1.1872.2.5.3.3.4.5.1.6ColumnospfIfNbrBackupDesignatedRtrread-onlycurrentThe IP Address of the backup designated Router for this OSPF Neighbour.
1.3.6.1.4.1.1872.2.5.3.3.4.5.1.7ColumnospfIfNbrIpAddressread-onlycurrentThe IP Address of the OSPF Neighbour.
1.3.6.1.4.1.1872.2.5.3.3.5NodegatewayInfo
1.3.6.1.4.1.1872.2.5.3.3.5.1TablegatewayInfoTablenot-accessiblecurrentThe table containing information for the default gateways.
1.3.6.1.4.1.1872.2.5.3.3.5.1.1RowgatewayInfoEntrynot-accessiblecurrentA row in the gateway information table
1.3.6.1.4.1.1872.2.5.3.3.5.1.1.1ColumngatewayInfoIndexread-onlycurrentThe gateway number for which the information is related.
1.3.6.1.4.1.1872.2.5.3.3.5.1.1.2ColumngatewayInfoAddrread-onlycurrentThe IP address of the default gateway.
1.3.6.1.4.1.1872.2.5.3.3.5.1.1.3ColumngatewayInfoVlanread-onlycurrentThe VLAN number for this gateway.
1.3.6.1.4.1.1872.2.5.3.3.5.1.1.4ColumngatewayInfoStatusread-onlycurrentThe status of the default gateway.
1.3.6.1.4.1.1872.2.5.3.3.5.1.1.5ColumngatewayInfoAddr6read-onlycurrentThe IP6 address of the default gateway.
1.3.6.1.4.1.1872.2.5.3.3.7NodenbrcacheInfo
1.3.6.1.4.1.1872.2.5.3.3.7.1TablenbrcacheInfoTablenot-accessiblecurrentThe table of nbrcache information.
1.3.6.1.4.1.1872.2.5.3.3.7.1.1RownbrcacheInfoEntrynot-accessiblecurrentInformation about neighbour discovery protocol.
1.3.6.1.4.1.1872.2.5.3.3.7.1.1.1ColumnnbrcacheInfoIndexread-onlycurrentThe index of the nbrcache entry.
1.3.6.1.4.1.1872.2.5.3.3.7.1.1.2ColumnnbrcacheInfoDestIpread-onlycurrentThe destination IP address of the nbrcache entry.
1.3.6.1.4.1.1872.2.5.3.3.7.1.1.3ColumnnbrcacheInfoStateread-onlycurrentThe state of the nbrcache entry.
1.3.6.1.4.1.1872.2.5.3.3.7.1.1.4ColumnnbrcacheInfoTyperead-onlycurrentThe type of the nbrcache entry.
1.3.6.1.4.1.1872.2.5.3.3.7.1.1.5ColumnnbrcacheInfoMacAddrread-onlycurrentThe MAC address for the nbrcache entry.
1.3.6.1.4.1.1872.2.5.3.3.7.1.1.6ColumnnbrcacheInfoVlanIdread-onlycurrentThe VLAN identifier for the nbrcache entry.
1.3.6.1.4.1.1872.2.5.3.3.7.1.1.7ColumnnbrcacheInfoPortNumread-onlycurrentThe port number on which this entry's equivalence is effective.
1.3.6.1.4.1.1872.2.5.3.3.7.2ScalarnbrcacheClearread-writecurrentSetting this value to clear(2) clears the Nbr cache, When read ok(1) is returned.
1.3.6.1.4.1.1872.2.5.3.3.7.3ScalarnbrcacheInfoTotDynamicEntriesread-onlycurrentThe total number of dynamic neighbour cache entries.
1.3.6.1.4.1.1872.2.5.3.3.7.4ScalarnbrcacheInfoTotLocalEntriesread-onlycurrentThe total number of local neighbour cache entries.
1.3.6.1.4.1.1872.2.5.3.3.7.5ScalarnbrcacheInfoTotOtherEntriesread-onlycurrentThe total number of other neighbour cache entries.
1.3.6.1.4.1.1872.2.5.3.3.7.6ScalarnbrcacheInfoTotStaticEntriesread-onlycurrentThe total number of static neighbour cache entries.
1.3.6.1.4.1.1872.2.5.3.3.8NodeipRoute6Info
1.3.6.1.4.1.1872.2.5.3.3.8.1TableipRoute6InfoTablenot-accessiblecurrentThe table of run-time IP6 routes.
1.3.6.1.4.1.1872.2.5.3.3.8.1.1RowipRoute6InfoEntrynot-accessiblecurrentA row in the run-time IP6 route table.
1.3.6.1.4.1.1872.2.5.3.3.8.1.1.1ColumnipRoute6InfoIndxread-onlycurrentThe index of this route6 table.
1.3.6.1.4.1.1872.2.5.3.3.8.1.1.2ColumnipRoute6InfoDestIp6read-onlycurrentThe destination of the route.
1.3.6.1.4.1.1872.2.5.3.3.8.1.1.3ColumnipRoute6InfoInterfaceread-onlycurrentThe interface of the route.
1.3.6.1.4.1.1872.2.5.3.3.8.1.1.4ColumnipRoute6InfoNextHopread-onlycurrentThe next hop of the route.
1.3.6.1.4.1.1872.2.5.3.3.8.1.1.5ColumnipRoute6InfoProtoread-onlycurrentThe protocol type of the route.
1.3.6.1.4.1.1872.2.5.3.3.8.1.1.6ColumnipRoute6InfoTunnelIdread-onlycurrentTunnel Id for this route.
1.3.6.1.4.1.1872.2.5.3.3.8.1.1.7ColumnipRoute6InfoModeread-onlycurrentRoute mode - gateway or tunnel route.
1.3.6.1.4.1.1872.2.5.3.3.9NodeipIntfInfo
1.3.6.1.4.1.1872.2.5.3.3.9.1TableipIntfInfoTablenot-accessiblecurrentThe table of IP interface information.
1.3.6.1.4.1.1872.2.5.3.3.9.1.1RowintfInfoEntrynot-accessiblecurrentA row in IP interface information table.
1.3.6.1.4.1.1872.2.5.3.3.9.1.1.1ColumnintfInfoIndexread-onlycurrentThe interface number for which the information is related.
1.3.6.1.4.1.1872.2.5.3.3.9.1.1.2ColumnintfInfoIpverread-onlycurrentThe type of IP address.
1.3.6.1.4.1.1872.2.5.3.3.9.1.1.3ColumnintfInfoAddrread-onlycurrentThe IP address of the interface.
1.3.6.1.4.1.1872.2.5.3.3.9.1.1.4ColumnintfInfoNetMaskread-onlycurrentThe subnet mask of the interface.
1.3.6.1.4.1.1872.2.5.3.3.9.1.1.5ColumnintfInfoBcastAddrread-onlycurrentThe broadcast address of the interface.
1.3.6.1.4.1.1872.2.5.3.3.9.1.1.6ColumnintfInfoVlanread-onlycurrentThe VLAN number for this interface.
1.3.6.1.4.1.1872.2.5.3.3.9.1.1.7ColumnintfInfoStatusread-onlycurrentThe status of the interface.
1.3.6.1.4.1.1872.2.5.3.3.9.1.1.8ColumnintfInfoLinkLocalAddrread-onlycurrentThe site local address of the interface.
1.3.6.1.4.1.1872.2.5.3.3.9.1.1.9ColumnintfInfoBfdread-onlycurrentGives information whether BFD is on/off on the interface.
1.3.6.1.4.1.1872.2.5.3.3.10Noderip2Info
1.3.6.1.4.1.1872.2.5.3.3.10.1Noderip2GeneralInfo
1.3.6.1.4.1.1872.2.5.3.3.10.1.1ScalarripInfoStateread-onlycurrentRIP global state.
1.3.6.1.4.1.1872.2.5.3.3.10.1.2ScalarripInfoUpdatePeriodread-onlycurrentUpdate Period in seconds.
1.3.6.1.4.1.1872.2.5.3.3.10.1.3ScalarripInfoVipread-onlycurrentAdvertise VIP Host Routes.
1.3.6.1.4.1.1872.2.5.3.3.10.1.4ScalarripInfoStaticSupplyread-onlycurrentAdvertise Static Routes.
1.3.6.1.4.1.1872.2.5.3.3.10.2Tablerip2InfoIntfTablenot-accessiblecurrentThe information table of RIP.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1RowripInfoIntfEntrynot-accessiblecurrentInformation about RIP on IP interface.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1.1ColumnripInfoIntfIndexread-onlycurrentThe interface number for which the RIP information is related.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1.2ColumnripInfoIntfVersionread-onlycurrentRIP version.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1.3ColumnripInfoIntfAddressread-onlycurrentThe interface address.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1.4ColumnripInfoIntfStateread-onlycurrentThe status of RIP protocol.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1.5ColumnripInfoIntfListenread-onlycurrentThe status of listening to route updates.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1.6ColumnripInfoIntfTrigUpdateread-onlycurrentThe status of triggered updates.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1.7ColumnripInfoIntfMcastUpdateread-onlycurrentThe status of multicast updates.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1.8ColumnripInfoIntfPoisonReverseread-onlycurrentThe status of RIP poison reverse.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1.9ColumnripInfoIntfSupplyread-onlycurrentThe status of supplying route updates.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1.10ColumnripInfoIntfMetricread-onlycurrentRIP route metric for this interface.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1.11ColumnripInfoIntfAuthread-onlycurrentThe type of Authentication used on this interface.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1.12ColumnripInfoIntfKeyread-onlycurrentRIP update authentication password.
1.3.6.1.4.1.1872.2.5.3.3.10.2.1.13ColumnripInfoIntfDefaultread-onlycurrentSpecifies what RIP does with default routes.
1.3.6.1.4.1.1872.2.5.3.3.11Noderip2RoutesInfo
1.3.6.1.4.1.1872.2.5.3.3.11.1Tablerip2RoutesInfoTablenot-accessiblecurrentThe table of rip routes.
1.3.6.1.4.1.1872.2.5.3.3.11.1.1Rowrip2RoutesInfoEntrynot-accessiblecurrentInformation about rip routes.
1.3.6.1.4.1.1872.2.5.3.3.11.1.1.1Columnrip2RoutesInfoDestIndexread-onlycurrentThe index of the rip routes.
1.3.6.1.4.1.1872.2.5.3.3.11.1.1.2Columnrip2RoutesInfoNxtHopIndexread-onlycurrentThe index of the next hop.
1.3.6.1.4.1.1872.2.5.3.3.11.1.1.3Columnrip2RoutesInfoDestinationread-onlycurrentThe destination of the rip route.
1.3.6.1.4.1.1872.2.5.3.3.11.1.1.4Columnrip2RoutesInfoIpAddressread-onlycurrentThe ipaddress of the next hop.
1.3.6.1.4.1.1872.2.5.3.3.11.1.1.5Columnrip2RoutesInfoMetricread-onlycurrentRIP route metric for this route.
1.3.6.1.4.1.1872.2.5.3.3.12NodeallowedNwInfo
1.3.6.1.4.1.1872.2.5.3.3.12.1TableallowedNwInfoTablenot-accessiblecurrentThe table of allowed network run-time information.
1.3.6.1.4.1.1872.2.5.3.3.12.1.1RowallowedNwInfoEntrynot-accessiblecurrentA row in the allowed network information table.
1.3.6.1.4.1.1872.2.5.3.3.12.1.1.1ColumnallowedNwInfoIndexread-onlycurrentThe allowed network index
1.3.6.1.4.1.1872.2.5.3.3.12.1.1.2ColumnallowedNwInfoIpverread-onlycurrentThe type of IP address.
1.3.6.1.4.1.1872.2.5.3.3.12.1.1.3ColumnallowedNwInfoVlanread-onlycurrentThe VLAN that the allowed network belongs to.
1.3.6.1.4.1.1872.2.5.3.3.12.1.1.4ColumnallowedNwInfoBeginIpAddrread-onlycurrentThe begin IP address of the allowed network.
1.3.6.1.4.1.1872.2.5.3.3.12.1.1.5ColumnallowedNwInfoEndIpAddrread-onlycurrentThe begin IP address of the allowed network.
1.3.6.1.4.1.1872.2.5.3.3.12.1.1.6ColumnallowedNwInfoNetMaskread-onlycurrentThe subnet mask of the allowed network.
1.3.6.1.4.1.1872.2.5.3.3.12.1.1.7ColumnallowedNwInfoIp6Prefixread-onlycurrentThe prefix length of the IP6 allowed network.
1.3.6.1.4.1.1872.2.5.3.3.13Nodeospfv3info
1.3.6.1.4.1.1872.2.5.3.3.13.1Nodeospfv3GeneralInfo
1.3.6.1.4.1.1872.2.5.3.3.13.1.1Scalarospfv3RouterIDread-onlycurrentThe Router ID for ospfv3.
1.3.6.1.4.1.1872.2.5.3.3.13.1.2Scalarospfv3AdminStateread-onlycurrentOspfv3 ena/dis state.
1.3.6.1.4.1.1872.2.5.3.3.13.1.3Scalarospfv3ASBRstatusread-onlycurrentASBR status for ospfv3.
1.3.6.1.4.1.1872.2.5.3.3.13.1.4Scalarospfv3ABRStatusread-onlycurrentOspfv3 ABR status.
1.3.6.1.4.1.1872.2.5.3.3.13.1.5Scalarospfv3ASscopeLSAcntread-onlycurrentCount for AS scope LSA.
1.3.6.1.4.1.1872.2.5.3.3.13.1.6Scalarospfv3RcvLSAcntread-onlycurrentReceived LSA count for ospfv3.
1.3.6.1.4.1.1872.2.5.3.3.13.1.7Scalarospfv3NewLSAcntread-onlycurrentNew LSA count for ospfv3.
1.3.6.1.4.1.1872.2.5.3.3.13.1.8Scalarospfv3MulticstExtread-onlycurrentMulticast extentions for ospfv3.
1.3.6.1.4.1.1872.2.5.3.3.13.2Tableospfv3AreaInfoTablenot-accessiblecurrentThe table of OSPFv3 Area information.
1.3.6.1.4.1.1872.2.5.3.3.13.2.1Rowospfv3AreaInfoEntrynot-accessiblecurrentInformation about a OSPFv3 area.
1.3.6.1.4.1.1872.2.5.3.3.13.2.1.1Columnospfv3AreaInfoIndexread-onlycurrentThe OSPFv3 area number for which the OSPF info table is related.
1.3.6.1.4.1.1872.2.5.3.3.13.2.1.2Columnospfv3AreaInfoIDread-onlycurrentThe IP address of the OSPFv3 area.
1.3.6.1.4.1.1872.2.5.3.3.13.2.1.3Columnospfv3AreaInfoImportAsExternread-onlycurrentThe OSPFv3 area Import as Extern status.
1.3.6.1.4.1.1872.2.5.3.3.13.2.1.4Columnospfv3AreaInfoSPFread-onlycurrentNumber of SPF Runs
1.3.6.1.4.1.1872.2.5.3.3.13.2.1.5Columnospfv3AreaInfoABRsread-onlycurrentNumber of Reachable ABRs
1.3.6.1.4.1.1872.2.5.3.3.13.2.1.6Columnospfv3AreaInfoASBRsread-onlycurrentNumber of Reachable ASBRs
1.3.6.1.4.1.1872.2.5.3.3.13.2.1.7Columnospfv3AreaInfoLSASread-onlycurrentNumber of Area Scope LSAs.
1.3.6.1.4.1.1872.2.5.3.3.13.2.1.8Columnospfv3AreaInfoSummaryread-onlycurrentArea Summary.
1.3.6.1.4.1.1872.2.5.3.3.13.2.1.9Columnospfv3AreaInfoStubMetricread-onlycurrentStub Metric.
1.3.6.1.4.1.1872.2.5.3.3.13.2.1.10Columnospfv3AreaInfoAreaTableCounterread-onlycurrentArea Table counter .
1.3.6.1.4.1.1872.2.5.3.3.13.2.1.11Columnospfv3AreaInfoAreaLSDBTabletCounterread-onlycurrentArea Table counter .
1.3.6.1.4.1.1872.2.5.3.3.13.3Tableospfv3IfInfoTablenot-accessiblecurrentThe table of OSPFv3 Interface information.
1.3.6.1.4.1.1872.2.5.3.3.13.3.1Rowospfv3IfInfoEntrynot-accessiblecurrentInformation about a OSPFv3 Interface.
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.1Columnospfv3IfInfoIndexread-onlycurrentThe OSPFv3 interface number for which the OSPF info table is related.
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.2Columnospfv3IfInfoVlanread-onlycurrentThe OSPFv3 interface VLAN for which the OSPF info table is related.
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.3Columnospfv3IfInfoAreaIDread-onlycurrentThe IP address of the OSPFv3 info .
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.4Columnospfv3IfInfoAdminStatread-onlycurrentThe OSPFv3 Info admin state.
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.5Columnospfv3IfInfoPrioread-onlycurrentThe OSPFv3 interface priority.
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.6Columnospfv3IfInfoTransitDelayread-onlycurrentThe OSPFv3 interface transit delay .
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.7Columnospfv3IfInfoRetransIntervalread-onlycurrentThe OSPFv3 interface retransit interval.
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.8Columnospfv3IfInfoRtrDeadIntervalread-onlycurrentThe OSPFv3 interface dead interval .
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.9Columnospfv3IfInfoHelloIntervalread-onlycurrentThe OSPFv3 interface hello interval.
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.10Columnospfv3IfInfoPollIntervalread-onlycurrentThe OSPFv3 interface poll interval .
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.11Columnospfv3IfInfoCostread-onlycurrentThe OSPFv3 interface cost.
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.12Columnospfv3IfInfoDridread-onlycurrentThe OSPFv3 interface cost.
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.13Columnospfv3IfInfoBdridread-onlycurrentThe OSPFv3 interface cost.
1.3.6.1.4.1.1872.2.5.3.3.13.3.1.14Columnospfv3IfInfoIfStateread-onlycurrentThe OSPFv3 Info interface state.
1.3.6.1.4.1.1872.2.5.3.3.13.4Tableospfv3IfNbrTablenot-accessiblecurrentThe table of OSPFv3 Interface Neighbour information.
1.3.6.1.4.1.1872.2.5.3.3.13.4.1Rowospfv3IfNbrEntrynot-accessiblecurrentInformation about a OSPFv3 interface, neighbour pair.
1.3.6.1.4.1.1872.2.5.3.3.13.4.1.1Columnospfv3IfNbrVlanIDread-onlycurrentThe VlanID to which the OSPFv3 neighbour is associated.
1.3.6.1.4.1.1872.2.5.3.3.13.4.1.2Columnospfv3IfNbrIpAddrread-onlycurrentThe OSPFv3 Neighbour ID .
1.3.6.1.4.1.1872.2.5.3.3.13.4.1.3Columnospfv3IfNbrAddrread-onlycurrentThe IPv6 address of the neighbor associated with the local link.
1.3.6.1.4.1.1872.2.5.3.3.13.4.1.4Columnospfv3IfNbrAreaIDread-onlycurrentThe area ID of the OSPFv3 neighbour.
1.3.6.1.4.1.1872.2.5.3.3.13.4.1.5Columnospfv3IfNbrIntfIndexread-onlycurrentThe OSPFv3 Interface number for which this Interface/Nbr table is related.
1.3.6.1.4.1.1872.2.5.3.3.13.4.1.6Columnospfv3IfNbrOptionread-onlycurrentA bit mask corresponding to the neighbor's options field.
1.3.6.1.4.1.1872.2.5.3.3.13.4.1.7Columnospfv3IfNbrPriorityread-onlycurrentThe priority of the OSPFv3 neighbour.
1.3.6.1.4.1.1872.2.5.3.3.13.4.1.8Columnospfv3IfNbrStateread-onlycurrentThe state of the OSPFv3 neighbour.
1.3.6.1.4.1.1872.2.5.3.3.13.4.1.9Columnospfv3IfNbrNoread-onlycurrentNumber of OSPFv3 Neighbour.
1.3.6.1.4.1.1872.2.5.3.3.14NodehaInfo
1.3.6.1.4.1.1872.2.5.3.3.14.1NodehaServiceInfo
1.3.6.1.4.1.1872.2.5.3.3.14.1.1TablehaServiceInfoTablenot-accessiblecurrentThe table of HA Service informations.
1.3.6.1.4.1.1872.2.5.3.3.14.1.1.1RowhaServiceInfoEntrynot-accessiblecurrentInformation about a particular HA Service.
1.3.6.1.4.1.1872.2.5.3.3.14.1.1.1.1ColumnhaServiceInfoIndexread-onlycurrentThe service index in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.3.14.1.1.1.2ColumnhaServiceInfoStateread-onlycurrentEnable/disable HA service group.
1.3.6.1.4.1.1872.2.5.3.3.14.1.1.1.3ColumnhaGroupInfoStateread-onlycurrentThe HA service group state Init/Backup/Master/Holdoff.
1.3.6.1.4.1.1872.2.5.3.3.14.2NodehaSwitchInfo
1.3.6.1.4.1.1872.2.5.3.3.14.2.1ScalarhaSwitchInfoStateread-onlycurrentThe HA switch state Init/Backup/Master/Holdoff.
1.3.6.1.4.1.1872.2.5.3.4Nodelayer3Oper
1.3.6.1.4.1.1872.2.5.3.4.1NodevrrpOper
1.3.6.1.4.1.1872.2.5.3.4.1.1TablevrrpOperVirtRtrTablenot-accessiblecurrentAn entry in the table of virtual routers. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.4.1.1.1RowvrrpOperVirtRtrEntrynot-accessiblecurrentA row in the vrrpOperVirtRtrTable
1.3.6.1.4.1.1872.2.5.3.4.1.1.1.1ColumnvrrpOperVirtRtrIndexread-onlycurrentThe index for the VRRP virtual router.
1.3.6.1.4.1.1872.2.5.3.4.1.1.1.2ColumnvrrpOperVirtRtrBackupread-writecurrentWhen set to a value of 'backup(2)' it forces the specified master virtual router into backup mode. 'ok(1)' is returned when the object is read.
1.3.6.1.4.1.1872.2.5.3.4.1.2ScalarvrrpOperVirtRtrGroupBackupread-writecurrentWhen set to a value of 'backup(2)' it forces the specified master virtual router group into backup mode. 'ok(1)' is returned when the object is read.
1.3.6.1.4.1.1872.2.5.3.4.2NodeipOper
1.3.6.1.4.1.1872.2.5.3.4.2.1NodebgpOper
1.3.6.1.4.1.1872.2.5.3.4.2.1.1NodebgpOperStart
1.3.6.1.4.1.1872.2.5.3.4.2.1.1.1ScalarbgpOperStartPeerNumread-writecurrentEnter BGP peer Number.Value 1 is returned when object is read. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.4.2.1.1.2ScalarbgpOperStartSessread-writecurrentThis is the action object,start(2) is to Start BGP peer session. ok(1) is returned when object is read Note:This mib is not supported for VX instance of virtua…
1.3.6.1.4.1.1872.2.5.3.4.2.1.2NodebgpOperStop
1.3.6.1.4.1.1872.2.5.3.4.2.1.2.1ScalarbgpOperStopPeerNumread-writecurrentEnter BGP peer Number.Value 1 is returned when object is read. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.4.2.1.2.2ScalarbgpOperStopSessread-writecurrentThis is an action object,stop(2) is to Stop BGP peer session. ok(1) is returned when object is read This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.4.2.2NodegarpOper
1.3.6.1.4.1.1872.2.5.3.4.2.2.1ScalargarpOperIpAddrread-writecurrentIp Address to Send gratuitous arp.Value 0.0.0.0 is returned when object is read. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.4.2.2.2ScalargarpOperVlanNumberread-writecurrentVlan Number to Send gratuitous arp.Value 1 is returned when object is read. Note:This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.4.2.2.3ScalargarpOperSendread-writecurrentThis is an action object,When set to value of send(2), it sends gratuitous arp.ok(1) is returned when garp request is sent successfully.Otherwise error(3) is r…
1.3.6.1.4.1.1872.2.5.3.4.3NodehaOper
1.3.6.1.4.1.1872.2.5.3.4.3.1TablehaOperServiceTablenot-accessiblecurrentAn entry in the table of HA group. This mib is not supported for VX instance of virtualization
1.3.6.1.4.1.1872.2.5.3.4.3.1.1RowhaOperServiceEntrynot-accessiblecurrentA row in the haOperServiceTable.
1.3.6.1.4.1.1872.2.5.3.4.3.1.1.1ColumnhaOperServiceIndexread-onlycurrentThe index for the ha service group in alphanumeric.
1.3.6.1.4.1.1872.2.5.3.4.3.1.1.2ColumnhaOperServiceBackupread-writecurrentWhen set to a value of 'backup(2)' it forces the specified HA service group master into backup mode. 'ok(1)' is returned when the object is read.
1.3.6.1.4.1.1872.2.5.3.4.3.2ScalarhaOperSwitchBackupread-writecurrentWhen set to a value of 'backup(2)' it forces the specified HA switch master into backup mode. 'ok(1)' is returned when the object is read.
MIB Viewer