ALTEON-TS-LAYER4-MIB
896 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1872.2.1.5 | Nodeserverloadbalance | |||
| 1.3.6.1.4.1.1872.2.1.5.1 | ScalarslbRealServerMaxSize | read-only | mandatory | The maximum number of entries in SLB RealServerTable. |
| 1.3.6.1.4.1.1872.2.1.5.2 | TableslbCurCfgRealServerTable | not-accessible | mandatory | The table of Real Server configuration in the current_config. |
| 1.3.6.1.4.1.1872.2.1.5.2.1 | RowslbCurCfgRealServerEntry | not-accessible | mandatory | Information about a particular Real Server configuration. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.1 | ColumnslbCurCfgRealServerIndex | read-only | mandatory | The real server number |
| 1.3.6.1.4.1.1872.2.1.5.2.1.2 | ColumnslbCurCfgRealServerIpAddr | read-only | mandatory | IP address of the real server identified by the instance of the slbRealServerIndex. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.3 | ColumnslbCurCfgRealServerWeight | read-only | mandatory | The server weight. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.4 | ColumnslbCurCfgRealServerMaxConns | read-only | mandatory | The maximum number of connections that are allowed. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.5 | ColumnslbCurCfgRealServerTimeOut | read-only | mandatory | The maximum number of minutes an inactive connection remains open. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.6 | ColumnslbCurCfgRealServerBackUp | read-only | mandatory | The backup server number for this server. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.7 | ColumnslbCurCfgRealServerPingInterval | read-only | mandatory | The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.8 | ColumnslbCurCfgRealServerFailRetry | read-only | mandatory | The number of failed attempts to declare this server DOWN. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.9 | ColumnslbCurCfgRealServerSuccRetry | read-only | mandatory | The number of successful attempts to declare a server UP. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.10 | ColumnslbCurCfgRealServerState | read-only | mandatory | Enable or disable this server. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.11 | ColumnslbCurCfgRealServerType | read-only | mandatory | The server type. It participates in global server load balancing when it is configured as remote-server. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.12 | ColumnslbCurCfgRealServerName | read-only | mandatory | The name of the real server. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.13 | ColumnslbCurCfgRealServerUrlBmap | read-only | mandatory | The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OC… |
| 1.3.6.1.4.1.1872.2.1.5.2.1.14 | ColumnslbCurCfgRealServerCookie | read-only | mandatory | The real server that will handle client requests that doesn't contain an URL cookie if Cookie loadbalance is enabled. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.15 | ColumnslbCurCfgRealServerExcludeStr | read-only | mandatory | The real server will handle requests that don't match the loadbalance string if it is enabled. |
| 1.3.6.1.4.1.1872.2.1.5.2.1.16 | ColumnslbCurCfgRealServerSubmac | read-only | mandatory | The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server fr… |
| 1.3.6.1.4.1.1872.2.1.5.2.1.17 | ColumnslbCurCfgRealServerProxy | read-only | mandatory | The real server config to enable/disable client proxy operation. |
| 1.3.6.1.4.1.1872.2.1.5.3 | TableslbNewCfgRealServerTable | not-accessible | mandatory | The table of Real Server configuration in the new_config. |
| 1.3.6.1.4.1.1872.2.1.5.3.1 | RowslbNewCfgRealServerEntry | not-accessible | mandatory | Information about a particular Real Server configuration. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.1 | ColumnslbNewCfgRealServerIndex | read-only | mandatory | The real server number |
| 1.3.6.1.4.1.1872.2.1.5.3.1.2 | ColumnslbNewCfgRealServerIpAddr | read-write | mandatory | IP address of the real server identified by the instance of slbRealServerIndex. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.3 | ColumnslbNewCfgRealServerWeight | read-write | mandatory | The server weight. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.4 | ColumnslbNewCfgRealServerMaxConns | read-write | mandatory | The maximum number of connections that are allowed. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.5 | ColumnslbNewCfgRealServerTimeOut | read-write | mandatory | The maximum number of minutes an inactive connection remains open. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.6 | ColumnslbNewCfgRealServerBackUp | read-write | mandatory | The backup server number for this server. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.7 | ColumnslbNewCfgRealServerPingInterval | read-write | mandatory | The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.8 | ColumnslbNewCfgRealServerFailRetry | read-write | mandatory | The number of failed attempts to declare this server DOWN. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.9 | ColumnslbNewCfgRealServerSuccRetry | read-write | mandatory | The number of successful attempts to declare a server UP. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.10 | ColumnslbNewCfgRealServerState | read-write | mandatory | Enable or disable this server. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.11 | ColumnslbNewCfgRealServerDelete | read-write | mandatory | By setting the value to delete(2), the entire row is deleted. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.12 | ColumnslbNewCfgRealServerType | read-write | mandatory | The server type. It participates in global server load balancing when it is configured as remote-server. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.13 | ColumnslbNewCfgRealServerName | read-write | mandatory | The name of the real server. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.14 | ColumnslbNewCfgRealServerUrlBmap | read-only | mandatory | The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OC… |
| 1.3.6.1.4.1.1872.2.1.5.3.1.15 | ColumnslbNewCfgRealServerAddUrl | read-write | mandatory | The URL Path (slbCurCfgUrlLbPathIndex) to be added to the real server. A zero is returned when read. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.16 | ColumnslbNewCfgRealServerRemUrl | read-write | mandatory | The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the real server. A zero is returned when read. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.17 | ColumnslbNewCfgRealServerCookie | read-write | mandatory | Enable or disable real server to handle client requests that don't contain a cookie if cookie loadbalance is enabled. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.18 | ColumnslbNewCfgRealServerExcludeStr | read-write | mandatory | Enable or disable exclusionary matching string on real server. |
| 1.3.6.1.4.1.1872.2.1.5.3.1.19 | ColumnslbNewCfgRealServerSubmac | read-write | mandatory | The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server fr… |
| 1.3.6.1.4.1.1872.2.1.5.3.1.20 | ColumnslbNewCfgRealServerProxy | read-write | mandatory | The real server config to enable/disable client proxy operation. |
| 1.3.6.1.4.1.1872.2.1.5.4 | ScalarslbVirtServerTableMaxSize | read-only | mandatory | The maximum number of entries in SLB VirtServerTable. |
| 1.3.6.1.4.1.1872.2.1.5.5 | TableslbCurCfgVirtServerTable | not-accessible | mandatory | The table of virtual Servers. |
| 1.3.6.1.4.1.1872.2.1.5.5.1 | RowslbCurCfgVirtualServerEntry | not-accessible | mandatory | A row in the virtual server table. |
| 1.3.6.1.4.1.1872.2.1.5.5.1.1 | ColumnslbCurCfgVirtServerIndex | read-only | mandatory | Virtual Server Number |
| 1.3.6.1.4.1.1872.2.1.5.5.1.2 | ColumnslbCurCfgVirtServerIpAddress | read-only | mandatory | IP address of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.5.1.3 | ColumnslbCurCfgVirtServerLayer3Only | read-only | mandatory | Enable or disable layer3 only balancing. |
| 1.3.6.1.4.1.1872.2.1.5.5.1.4 | ColumnslbCurCfgVirtServerState | read-only | mandatory | Enable or disable the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.5.1.5 | ColumnslbCurCfgVirtServerDname | read-only | mandatory | The domain name of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.5.1.6 | ColumnslbCurCfgVirtServerCname | read-only | mandatory | The cookie name of the virtual server used for cookie load balance. |
| 1.3.6.1.4.1.1872.2.1.5.5.1.7 | ColumnslbCurCfgVirtServerCoffset | read-only | mandatory | The starting byte offset of the cookie value. |
| 1.3.6.1.4.1.1872.2.1.5.5.1.8 | ColumnslbCurCfgVirtServerClength | read-only | mandatory | The number of bytes to extract from the cookie value. |
| 1.3.6.1.4.1.1872.2.1.5.5.1.9 | ColumnslbCurCfgVirtServerUriCookie | read-only | mandatory | Enable or disable cookie search in URI |
| 1.3.6.1.4.1.1872.2.1.5.5.1.10 | ColumnslbCurCfgVirtServerFtpParsing | read-only | obsolete | Enable or Disable the ftp parsing for the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.5.1.11 | ColumnslbCurCfgVirtServerUrlHashLen | read-only | mandatory | The number of bytes used to hash onto server. A zero means URL hashing disabled. |
| 1.3.6.1.4.1.1872.2.1.5.5.1.12 | ColumnslbCurCfgVirtServerHttpHdrName | read-only | mandatory | The HTTP header name of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.5.1.13 | ColumnslbCurCfgVirtServerBwmContract | read-only | mandatory | The default BW contract of virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.5.1.14 | ColumnslbCurCfgVirtServerResponseCount | read-only | mandatory | The number of cookie search response count. |
| 1.3.6.1.4.1.1872.2.1.5.5.1.15 | ColumnslbCurCfgVirtServerCExpire | read-only | mandatory | The cookie expire of the virtual server used for insert cookie load balance depending on the mode it has the following format <MM/dd/yy[@hh:mm]> absolute mode … |
| 1.3.6.1.4.1.1872.2.1.5.6 | TableslbNewCfgVirtServerTable | not-accessible | mandatory | The table of virtual Servers. |
| 1.3.6.1.4.1.1872.2.1.5.6.1 | RowslbNewCfgVirtualServerEntry | not-accessible | mandatory | A row in the virtual server table. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.1 | ColumnslbNewCfgVirtServerIndex | read-only | mandatory | The Virtual Server Number |
| 1.3.6.1.4.1.1872.2.1.5.6.1.2 | ColumnslbNewCfgVirtServerIpAddress | read-write | mandatory | IP address of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.3 | ColumnslbNewCfgVirtServerLayer3Only | read-write | mandatory | Enable or disable layer3 only balancing. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.4 | ColumnslbNewCfgVirtServerState | read-write | mandatory | Enable or disable the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.5 | ColumnslbNewCfgVirtServerDelete | read-write | mandatory | By setting the value to delete(2), the entire row is deleted. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.6 | ColumnslbNewCfgVirtServerDname | read-write | mandatory | The domain name of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.7 | ColumnslbNewCfgVirtServerCname | read-write | mandatory | The cookie name of the virtual server used for cookie load balance. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.8 | ColumnslbNewCfgVirtServerCoffset | read-write | mandatory | The starting byte offset of the cookie value. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.9 | ColumnslbNewCfgVirtServerClength | read-write | mandatory | The number of bytes to extract from the cookie value. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.10 | ColumnslbNewCfgVirtServerUriCookie | read-write | mandatory | Enable or disable cookie search in URI |
| 1.3.6.1.4.1.1872.2.1.5.6.1.11 | ColumnslbNewCfgVirtServerFtpParsing | read-write | obsolete | Enable or Disable the ftp parsing for the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.12 | ColumnslbNewCfgVirtServerUrlHashLen | read-write | mandatory | The number of bytes used to hash onto server, A zero means URL hashing disabled. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.13 | ColumnslbNewCfgVirtServerHttpHdrName | read-write | mandatory | The HTTP header name of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.14 | ColumnslbNewCfgVirtServerBwmContract | read-write | mandatory | The default BW contract number of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.15 | ColumnslbNewCfgVirtServerResponseCount | read-write | mandatory | The number of cookie search response count. |
| 1.3.6.1.4.1.1872.2.1.5.6.1.16 | ColumnslbNewCfgVirtServerCExpire | read-write | mandatory | The cookie expire of the virtual server used for insert cookie load balance depending on the mode it has the following format <MM/dd/yy[@hh:mm]> absolute mode … |
| 1.3.6.1.4.1.1872.2.1.5.7 | TableslbCurCfgVirtServicesTable | not-accessible | mandatory | The table of virtual services. |
| 1.3.6.1.4.1.1872.2.1.5.7.1 | RowslbCurCfgVirtServicesEntry | not-accessible | mandatory | A row in the virtual services table. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.1 | ColumnslbCurCfgVirtServIndex | read-only | mandatory | The number of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.2 | ColumnslbCurCfgVirtServiceIndex | read-only | mandatory | The service index. This has no external meaning |
| 1.3.6.1.4.1.1872.2.1.5.7.1.3 | ColumnslbCurCfgVirtServiceVirtPort | read-only | mandatory | The layer4 virtual port number of the service. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.4 | ColumnslbCurCfgVirtServiceRealGroup | read-only | mandatory | The real server group number for this service. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.5 | ColumnslbCurCfgVirtServiceRealPort | read-only | mandatory | The layer4 real port number of the service. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.6 | ColumnslbCurCfgVirtServiceUDPBalance | read-only | mandatory | Enable, disable or stateless the UDP balancing for the virtual port. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.7 | ColumnslbCurCfgVirtServicePBind | read-only | mandatory | Enable or disable persistent bindings for the virtual port. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.8 | ColumnslbCurCfgVirtServiceHname | read-only | mandatory | The host name of the virtual service. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.9 | ColumnslbCurCfgVirtServiceHttpSlb | read-only | mandatory | Select HTTP server loadbalancing for the virtual port. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.10 | ColumnslbCurCfgVirtServiceBwmContract | read-only | mandatory | The BWM contract number for this service. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.11 | ColumnslbCurCfgVirtServiceDirServerRtn | read-only | mandatory | Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return … |
| 1.3.6.1.4.1.1872.2.1.5.7.1.12 | ColumnslbCurCfgVirtServiceRtspUrlParse | read-only | mandatory | Enable or disable RTSP URL hashing. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.13 | ColumnslbCurCfgVirtServiceCookieMode | read-only | mandatory | Select cookie persistance mode. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.14 | ColumnslbCurCfgVirtServiceDBind | read-only | mandatory | Enable or disable Delayed Binding. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.15 | ColumnslbCurCfgVirtServiceFtpParsing | read-only | mandatory | Enable or Disable the ftp parsing for the virtual service. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.16 | ColumnslbCurCfgVirtServiceHttpSlbOption | read-only | mandatory | Select HTTP server loadbalancing option for the virtual port. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.17 | ColumnslbCurCfgVirtServiceHttpSlb2 | read-only | mandatory | Select HTTP server loadbalancing for the virtual port. |
| 1.3.6.1.4.1.1872.2.1.5.7.1.18 | ColumnslbCurCfgVirtServiceRemapUDPFrags | read-only | mandatory | Enable or disable remapping UDP server fragments |
| 1.3.6.1.4.1.1872.2.1.5.7.1.19 | ColumnslbCurCfgVirtServiceDnsSlb | read-only | mandatory | Enable or disable DNS query load balancing. |
| 1.3.6.1.4.1.1872.2.1.5.8 | TableslbNewCfgVirtServicesTable | not-accessible | mandatory | The table of virtual Services. |
| 1.3.6.1.4.1.1872.2.1.5.8.1 | RowslbNewCfgVirtServicesEntry | not-accessible | mandatory | A row in the virtual services table. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.1 | ColumnslbNewCfgVirtServIndex | read-only | mandatory | The number of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.2 | ColumnslbNewCfgVirtServiceIndex | read-only | mandatory | The service index. This has no external meaning |
| 1.3.6.1.4.1.1872.2.1.5.8.1.3 | ColumnslbNewCfgVirtServiceVirtPort | read-write | mandatory | The layer4 virtual port number of the service. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.4 | ColumnslbNewCfgVirtServiceRealGroup | read-write | mandatory | The real server group number for this service. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.5 | ColumnslbNewCfgVirtServiceRealPort | read-write | mandatory | The layer4 real port number of the service. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.6 | ColumnslbNewCfgVirtServiceUDPBalance | read-write | mandatory | Enable, disable or stateless the UDP balancing for the virtual port. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.7 | ColumnslbNewCfgVirtServicePBind | read-write | mandatory | Enable or disable persistent bindings for the virtual port. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.8 | ColumnslbNewCfgVirtServiceHname | read-write | mandatory | The host name of the virtual service. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.9 | ColumnslbNewCfgVirtServiceHttpSlb | read-write | mandatory | Select HTTP server loadbalancing for the virtual port. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.10 | ColumnslbNewCfgVirtServiceBwmContract | read-write | mandatory | The BWM contract number for this service. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.11 | ColumnslbNewCfgVirtServiceDirServerRtn | read-write | mandatory | Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return … |
| 1.3.6.1.4.1.1872.2.1.5.8.1.12 | ColumnslbNewCfgVirtServiceDelete | read-write | mandatory | When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe… |
| 1.3.6.1.4.1.1872.2.1.5.8.1.13 | ColumnslbNewCfgVirtServiceRtspUrlParse | read-write | mandatory | Enable or disable RTSP URL hashing. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.14 | ColumnslbNewCfgVirtServiceCookieMode | read-write | mandatory | Select cookie persistance mode. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.15 | ColumnslbNewCfgVirtServiceDBind | read-write | mandatory | Enable or disable Delayed Binding. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.16 | ColumnslbNewCfgVirtServiceFtpParsing | read-write | mandatory | Enable or Disable the ftp parsing for the virtual service. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.17 | ColumnslbNewCfgVirtServiceHttpSlbOption | read-write | mandatory | Select HTTP server loadbalancing for the virtual port. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.18 | ColumnslbNewCfgVirtServiceHttpSlb2 | read-write | mandatory | Select HTTP server loadbalancing for the virtual port. |
| 1.3.6.1.4.1.1872.2.1.5.8.1.19 | ColumnslbNewCfgVirtServiceRemapUDPFrags | read-write | mandatory | Enable or disable remapping UDP server fragments |
| 1.3.6.1.4.1.1872.2.1.5.8.1.20 | ColumnslbNewCfgVirtServiceDnsSlb | read-write | mandatory | Enable or disable DNS query load balancing. |
| 1.3.6.1.4.1.1872.2.1.5.9 | ScalarslbGroupTableMaxSize | read-only | mandatory | The maximum number of entries in slbCurCfgGroupTable. |
| 1.3.6.1.4.1.1872.2.1.5.10 | TableslbCurCfgGroupTable | not-accessible | mandatory | The table of groups |
| 1.3.6.1.4.1.1872.2.1.5.10.1 | RowslbCurCfgGroupEntry | not-accessible | mandatory | A row in the slbCurCfgGroupTable |
| 1.3.6.1.4.1.1872.2.1.5.10.1.1 | ColumnslbCurCfgGroupIndex | read-only | mandatory | The group number for which the information pertains. |
| 1.3.6.1.4.1.1872.2.1.5.10.1.2 | ColumnslbCurCfgGroupRealServers | read-only | mandatory | The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 |… |
| 1.3.6.1.4.1.1872.2.1.5.10.1.3 | ColumnslbCurCfgGroupMetric | read-only | mandatory | The metric used to select next server in group. |
| 1.3.6.1.4.1.1872.2.1.5.10.1.4 | ColumnslbCurCfgGroupBackupServer | read-only | mandatory | The backup real server for this group. |
| 1.3.6.1.4.1.1872.2.1.5.10.1.5 | ColumnslbCurCfgGroupHealthCheckUrl | read-only | mandatory | The specific content which is examined during health checks. The content depends on the type of health check. |
| 1.3.6.1.4.1.1872.2.1.5.10.1.6 | ColumnslbCurCfgGroupHealthCheckLayer | read-only | mandatory | The OSI layer at which servers are health checked. |
| 1.3.6.1.4.1.1872.2.1.5.10.1.7 | ColumnslbCurCfgGroupName | read-only | mandatory | The name of the real server group. |
| 1.3.6.1.4.1.1872.2.1.5.10.1.8 | ColumnslbCurCfgGroupRealThreshold | read-only | mandatory | The server failure syslog threshold of the real server group. |
| 1.3.6.1.4.1.1872.2.1.5.10.1.9 | ColumnslbCurCfgGroupBackupGroup | read-only | mandatory | The backup real server group for this group. |
| 1.3.6.1.4.1.1872.2.1.5.10.1.10 | ColumnslbCurCfgGroupVipHealthCheck | read-only | mandatory | Enable or disable VIP health checking in DSR mode. |
| 1.3.6.1.4.1.1872.2.1.5.11 | TableslbNewCfgGroupTable | not-accessible | mandatory | The table of groups |
| 1.3.6.1.4.1.1872.2.1.5.11.1 | RowslbNewCfgGroupEntry | not-accessible | mandatory | A row in the slbNewCfgGroupTable |
| 1.3.6.1.4.1.1872.2.1.5.11.1.1 | ColumnslbNewCfgGroupIndex | read-only | mandatory | The group number for which the information pertains. |
| 1.3.6.1.4.1.1872.2.1.5.11.1.2 | ColumnslbNewCfgGroupRealServers | read-only | mandatory | The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 |… |
| 1.3.6.1.4.1.1872.2.1.5.11.1.3 | ColumnslbNewCfgGroupAddServer | read-write | mandatory | The real server to be added to the group. When read, 0 is returned. |
| 1.3.6.1.4.1.1872.2.1.5.11.1.4 | ColumnslbNewCfgGroupRemoveServer | read-write | mandatory | The real server to be removed from the group. When read, 0 is returned. |
| 1.3.6.1.4.1.1872.2.1.5.11.1.5 | ColumnslbNewCfgGroupMetric | read-write | mandatory | The metric used to select next server in group. |
| 1.3.6.1.4.1.1872.2.1.5.11.1.6 | ColumnslbNewCfgGroupBackupServer | read-write | mandatory | The backup real server for this group. |
| 1.3.6.1.4.1.1872.2.1.5.11.1.7 | ColumnslbNewCfgGroupDelete | read-write | mandatory | By setting the value to delete(2), the entire group is deleted. |
| 1.3.6.1.4.1.1872.2.1.5.11.1.8 | ColumnslbNewCfgGroupHealthCheckUrl | read-write | mandatory | The specific content which is examined during health checks. The content depends on the type of health check. |
| 1.3.6.1.4.1.1872.2.1.5.11.1.9 | ColumnslbNewCfgGroupHealthCheckLayer | read-write | mandatory | The OSI layer at which servers are health checked. |
| 1.3.6.1.4.1.1872.2.1.5.11.1.10 | ColumnslbNewCfgGroupName | read-write | mandatory | The name of the real server group. |
| 1.3.6.1.4.1.1872.2.1.5.11.1.11 | ColumnslbNewCfgGroupRealThreshold | read-write | mandatory | The server failure syslog threshold of the real server group. |
| 1.3.6.1.4.1.1872.2.1.5.11.1.12 | ColumnslbNewCfgGroupBackupGroup | read-write | mandatory | The backup real server group for this group. |
| 1.3.6.1.4.1.1872.2.1.5.11.1.13 | ColumnslbNewCfgGroupVipHealthCheck | read-write | mandatory | Enable or disable VIP health checking in DSR mode. |
| 1.3.6.1.4.1.1872.2.1.5.12 | TableslbCurCfgPortTable | not-accessible | mandatory | The table of ports and their SLB states |
| 1.3.6.1.4.1.1872.2.1.5.12.1 | RowslbCurCfgPortEntry | not-accessible | mandatory | A row in the slbPortTable |
| 1.3.6.1.4.1.1872.2.1.5.12.1.1 | ColumnslbCurCfgPortIndex | read-only | mandatory | The port number for which the SLB information pertains. |
| 1.3.6.1.4.1.1872.2.1.5.12.1.2 | ColumnslbCurCfgPortProxyIpAddr | read-only | mandatory | The proxy IP address of the interface. |
| 1.3.6.1.4.1.1872.2.1.5.12.1.3 | ColumnslbCurCfgPortSlbState | read-only | mandatory | The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port |
| 1.3.6.1.4.1.1872.2.1.5.12.1.4 | ColumnslbCurCfgPortSlbHotStandby | read-only | mandatory | Enable or disable hot standby processing on the switch port. |
| 1.3.6.1.4.1.1872.2.1.5.12.1.5 | ColumnslbCurCfgPortSlbInterSwitch | read-only | mandatory | Enable or disable inter-switch processing on the switch port. |
| 1.3.6.1.4.1.1872.2.1.5.12.1.6 | ColumnslbCurCfgPortSlbPipState | read-only | mandatory | Enable or disable use of proxy IP address on the switch port. |
| 1.3.6.1.4.1.1872.2.1.5.12.1.7 | ColumnslbCurCfgPortSlbRtsState | read-only | mandatory | Enable or disable RTS processing on the switch port. |
| 1.3.6.1.4.1.1872.2.1.5.12.1.8 | ColumnslbCurCfgPortSlbIdslbState | read-only | mandatory | Enable or disable Intrusion Detection server load balancing. |
| 1.3.6.1.4.1.1872.2.1.5.12.1.9 | ColumnslbCurCfgPortSlbNasaState | read-only | mandatory | Enable or disable NASA base processing. |
| 1.3.6.1.4.1.1872.2.1.5.13 | TableslbNewCfgPortTable | not-accessible | mandatory | The table of ports and their SLB states |
| 1.3.6.1.4.1.1872.2.1.5.13.1 | RowslbNewCfgPortEntry | not-accessible | mandatory | A row in the slbPortTable |
| 1.3.6.1.4.1.1872.2.1.5.13.1.1 | ColumnslbNewCfgPortIndex | read-only | mandatory | The port number for which the SLB information pertains. |
| 1.3.6.1.4.1.1872.2.1.5.13.1.2 | ColumnslbNewCfgPortProxyIpAddr | read-write | mandatory | The proxy IP address of the interface. |
| 1.3.6.1.4.1.1872.2.1.5.13.1.3 | ColumnslbNewCfgPortSlbState | read-write | mandatory | The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port |
| 1.3.6.1.4.1.1872.2.1.5.13.1.4 | ColumnslbNewCfgPortSlbHotStandby | read-write | mandatory | Enable or disable hot standby processing on the switch port. |
| 1.3.6.1.4.1.1872.2.1.5.13.1.5 | ColumnslbNewCfgPortSlbInterSwitch | read-write | mandatory | Enable or disable inter-switch processing on the switch port. |
| 1.3.6.1.4.1.1872.2.1.5.13.1.6 | ColumnslbNewCfgPortSlbPipState | read-write | mandatory | Enable or disable use of proxy IP address on the switch port. |
| 1.3.6.1.4.1.1872.2.1.5.13.1.7 | ColumnslbNewCfgPortSlbRtsState | read-write | mandatory | Enable or disable RTS processing on the switch port. |
| 1.3.6.1.4.1.1872.2.1.5.13.1.8 | ColumnslbNewCfgPortDelete | read-write | mandatory | When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe… |
| 1.3.6.1.4.1.1872.2.1.5.13.1.9 | ColumnslbNewCfgPortSlbIdslbState | read-write | mandatory | Enable or disable Intrusion Detection server load balancing. |
| 1.3.6.1.4.1.1872.2.1.5.13.1.10 | ColumnslbNewCfgPortSlbNasaState | read-write | mandatory | Enable or disable NASA base processing. |
| 1.3.6.1.4.1.1872.2.1.5.14 | ScalarslbCurCfgImask | read-only | mandatory | The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu. |
| 1.3.6.1.4.1.1872.2.1.5.15 | ScalarslbNewCfgImask | read-write | mandatory | The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu. |
| 1.3.6.1.4.1.1872.2.1.5.16 | Nodeslbfailover | |||
| 1.3.6.1.4.1.1872.2.1.5.16.1 | TableslbCurCfgFailOverTable | not-accessible | obsolete | The table of current switch fail-over configuration. |
| 1.3.6.1.4.1.1872.2.1.5.16.1.1 | RowslbCurCfgFailOverTblEntry | not-accessible | obsolete | A row in the current switch fail-over configuration table. |
| 1.3.6.1.4.1.1872.2.1.5.16.1.1.1 | ColumnslbCurCfgFailOverIndex | read-only | obsolete | The index of current switch fail-over configuration table. |
| 1.3.6.1.4.1.1872.2.1.5.16.1.1.2 | ColumnslbCurCfgFailOverPrimaryIp | read-only | obsolete | The IP address of the Primary switch. |
| 1.3.6.1.4.1.1872.2.1.5.16.1.1.3 | ColumnslbCurCfgFailOverSecondaryIp | read-only | obsolete | The IP address of the Secondary switch. |
| 1.3.6.1.4.1.1872.2.1.5.16.1.1.4 | ColumnslbCurCfgFailOverSilenceInterval | read-only | obsolete | Number of seconds before a silent peer is assumed down. |
| 1.3.6.1.4.1.1872.2.1.5.16.1.1.5 | ColumnslbCurCfgFailOverState | read-only | obsolete | Enable or disable slb switch failover feature. |
| 1.3.6.1.4.1.1872.2.1.5.16.1.1.6 | ColumnslbCurCfgFailOverRouteSupply | read-only | obsolete | Enable or disable to supply network routes update when switch is a standby switch. |
| 1.3.6.1.4.1.1872.2.1.5.16.2 | TableslbNewCfgFailOverTable | not-accessible | obsolete | The table of new switch fail-over configuration. |
| 1.3.6.1.4.1.1872.2.1.5.16.2.1 | RowslbNewCfgFailOverTblEntry | not-accessible | obsolete | A row in the new switch fail-over configuration table. |
| 1.3.6.1.4.1.1872.2.1.5.16.2.1.1 | ColumnslbNewCfgFailOverIndex | read-only | obsolete | The index of new switch fail-over configuration table. |
| 1.3.6.1.4.1.1872.2.1.5.16.2.1.2 | ColumnslbNewCfgFailOverPrimaryIp | read-write | obsolete | The IP address of the Primary switch. |
| 1.3.6.1.4.1.1872.2.1.5.16.2.1.3 | ColumnslbNewCfgFailOverSecondaryIp | read-write | obsolete | The IP address of the Secondary switch. |
| 1.3.6.1.4.1.1872.2.1.5.16.2.1.4 | ColumnslbNewCfgFailOverSilenceInterval | read-write | obsolete | Number of seconds before a silent peer is assumed down. |
| 1.3.6.1.4.1.1872.2.1.5.16.2.1.5 | ColumnslbNewCfgFailOverState | read-write | obsolete | Enable or disable slb switch failover feature. |
| 1.3.6.1.4.1.1872.2.1.5.16.2.1.6 | ColumnslbNewCfgFailOverRouteSupply | read-only | obsolete | Enable or disable to supply network routes update when switch is a standby switch. |
| 1.3.6.1.4.1.1872.2.1.5.17 | ScalarslbCurCfgGlobalControl | read-only | mandatory | The global state of Server Load Balancing. |
| 1.3.6.1.4.1.1872.2.1.5.18 | ScalarslbNewCfgGlobalControl | read-write | mandatory | The global state of Server Load Balancing. |
| 1.3.6.1.4.1.1872.2.1.5.19 | ScalarslbCurCfgMnet | read-only | mandatory | The management network - corresponding to the mnet command of the slb configuration menu. |
| 1.3.6.1.4.1.1872.2.1.5.20 | ScalarslbNewCfgMnet | read-write | mandatory | The management network - corresponding to the mnet command of the slb configuration menu. |
| 1.3.6.1.4.1.1872.2.1.5.21 | ScalarslbCurCfgMmask | read-only | mandatory | The management subnet mask - corresponding to the mmask command of the slb configuration menu. |
| 1.3.6.1.4.1.1872.2.1.5.22 | ScalarslbNewCfgMmask | read-write | mandatory | The management subnet mask - corresponding to the mmask command of the slb configuration menu. |
| 1.3.6.1.4.1.1872.2.1.5.23 | ScalarslbCurCfgRadiusAuthenString | read-only | mandatory | The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check. |
| 1.3.6.1.4.1.1872.2.1.5.24 | ScalarslbNewCfgRadiusAuthenString | read-write | mandatory | The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check. |
| 1.3.6.1.4.1.1872.2.1.5.25 | ScalarslbCurCfgDirectMode | read-only | mandatory | Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1). |
| 1.3.6.1.4.1.1872.2.1.5.26 | ScalarslbNewCfgDirectMode | read-write | mandatory | Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1). |
| 1.3.6.1.4.1.1872.2.1.5.27 | NodeslbUrl | |||
| 1.3.6.1.4.1.1872.2.1.5.27.1 | NodeslbUrlRedir | |||
| 1.3.6.1.4.1.1872.2.1.5.27.1.1 | TableslbCurCfgUrlExpTable | not-accessible | mandatory | The table of URL expressions in the current_config. |
| 1.3.6.1.4.1.1872.2.1.5.27.1.1.1 | RowslbCurCfgUrlExpTableEntry | not-accessible | mandatory | Information about a expression for URL parsing. |
| 1.3.6.1.4.1.1872.2.1.5.27.1.1.1.1 | ColumnslbCurCfgUrlExpIndex | read-only | mandatory | The URL expressions table index. |
| 1.3.6.1.4.1.1872.2.1.5.27.1.1.1.2 | ColumnslbCurCfgUrlExpression | read-only | mandatory | The expressions for URL parsing. |
| 1.3.6.1.4.1.1872.2.1.5.27.1.2 | TableslbNewCfgUrlExpTable | not-accessible | mandatory | The table of URL expressions in the new_config. |
| 1.3.6.1.4.1.1872.2.1.5.27.1.2.1 | RowslbNewCfgUrlExpTableEntry | not-accessible | mandatory | Information about a expression for URL parsing. |
| 1.3.6.1.4.1.1872.2.1.5.27.1.2.1.1 | ColumnslbNewCfgUrlExpIndex | read-only | mandatory | The URL expressions table index. |
| 1.3.6.1.4.1.1872.2.1.5.27.1.2.1.2 | ColumnslbNewCfgUrlExpression | read-write | mandatory | The expressions for URL parsing. |
| 1.3.6.1.4.1.1872.2.1.5.27.1.2.1.3 | ColumnslbNewCfgUrlExpDelete | read-write | mandatory | Action object to delete an URL expression. When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value t… |
| 1.3.6.1.4.1.1872.2.1.5.27.1.3 | ScalarslbCurCfgUrlRedirNonGetOrigSrv | read-only | mandatory | This is for controlling if the switch should redirect packet to the origin server when HTTP non-GETs are detected. enabled(1) - Allow redirect traffic to the o… |
| 1.3.6.1.4.1.1872.2.1.5.27.1.4 | ScalarslbNewCfgUrlRedirNonGetOrigSrv | read-write | mandatory | This is for controlling if the switch should redirect packet to the origin server when HTTP non-GETs are detected. enabled(1) - Allow redirect traffic to the o… |
| 1.3.6.1.4.1.1872.2.1.5.27.1.5 | ScalarslbCurCfgUrlRedirCookieOrigSrv | read-only | mandatory | This is for controlling if the switch should redirect packet to the origin server when user cookies are detected. enabled(1) - Allow redirect traffic to the or… |
| 1.3.6.1.4.1.1872.2.1.5.27.1.6 | ScalarslbNewCfgUrlRedirCookieOrigSrv | read-write | mandatory | This is for controlling if the switch should redirect packet to the origin server when user cookies are detected. enabled(1) - Allow redirect traffic to the or… |
| 1.3.6.1.4.1.1872.2.1.5.27.1.7 | ScalarslbCurCfgUrlRedirNoCacheOrigSrv | read-only | mandatory | This is for controlling if the switch should redirect packet to the origin server when no-cache header are detected. enabled(1) - Allow redirect traffic to the… |
| 1.3.6.1.4.1.1872.2.1.5.27.1.8 | ScalarslbNewCfgUrlRedirNoCacheOrigSrv | read-write | mandatory | This is for controlling if the switch should redirect packet to the origin server when no-cache header are detected. enabled(1) - Allow redirect traffic to the… |
| 1.3.6.1.4.1.1872.2.1.5.27.1.9 | ScalarslbCurCfgUrlRedirUriHashLength | read-only | mandatory | Specify the number of bytes in the URI will be used to hash onto server |
| 1.3.6.1.4.1.1872.2.1.5.27.1.10 | ScalarslbNewCfgUrlRedirUriHashLength | read-write | mandatory | Specify the number of bytes in the URI will be used to hash onto server |
| 1.3.6.1.4.1.1872.2.1.5.27.1.11 | ScalarslbCurCfgUrlRedirHeader | read-only | mandatory | This is for controlling if the switch should redirect packet to the cache server based on HTTP header. enabled(1) - Redirect web traffic based on HTTP header d… |
| 1.3.6.1.4.1.1872.2.1.5.27.1.12 | ScalarslbNewCfgUrlRedirHeader | read-write | mandatory | This is for controlling if the switch should redirect packet to the cache server based on HTTP header. enabled(1) - Redirect web traffic based on HTTP header d… |
| 1.3.6.1.4.1.1872.2.1.5.27.1.13 | ScalarslbCurCfgUrlRedirHeaderName | read-only | mandatory | The HTTP header name |
| 1.3.6.1.4.1.1872.2.1.5.27.1.14 | ScalarslbNewCfgUrlRedirHeaderName | read-write | mandatory | The HTTP header name |
| 1.3.6.1.4.1.1872.2.1.5.27.1.15 | ScalarslbUrlExpTableMaxSize | read-only | mandatory | The maximum number of entries in SLB Url Expression table. |
| 1.3.6.1.4.1.1872.2.1.5.27.2 | NodeslbUrlBalance | |||
| 1.3.6.1.4.1.1872.2.1.5.27.2.1 | TableslbCurCfgUrlLbPathTable | not-accessible | mandatory | The table of URL path for URL load balancing in the current_config. |
| 1.3.6.1.4.1.1872.2.1.5.27.2.1.1 | RowslbCurCfgUrlLbPathTableEntry | not-accessible | mandatory | Information about an URL path for URL load balancing. |
| 1.3.6.1.4.1.1872.2.1.5.27.2.1.1.1 | ColumnslbCurCfgUrlLbPathIndex | read-only | mandatory | The URL path table index. |
| 1.3.6.1.4.1.1872.2.1.5.27.2.1.1.2 | ColumnslbCurCfgUrlLbPathString | read-only | mandatory | The URL path for URL load balancing. |
| 1.3.6.1.4.1.1872.2.1.5.27.2.1.1.3 | ColumnslbCurCfgUrlLbBwmContract | read-only | mandatory | The BW contract for the path. |
| 1.3.6.1.4.1.1872.2.1.5.27.2.2 | TableslbNewCfgUrlLbPathTable | not-accessible | mandatory | The table of URL path for URL load balancing in the new_config. |
| 1.3.6.1.4.1.1872.2.1.5.27.2.2.1 | RowslbNewCfgUrlLbPathTableEntry | not-accessible | mandatory | Information about an URL path for URL load balancing. |
| 1.3.6.1.4.1.1872.2.1.5.27.2.2.1.1 | ColumnslbNewCfgUrlLbPathIndex | read-only | mandatory | The URL path table index. |
| 1.3.6.1.4.1.1872.2.1.5.27.2.2.1.2 | ColumnslbNewCfgUrlLbPathString | read-write | mandatory | The URL path for URL load balancing. |
| 1.3.6.1.4.1.1872.2.1.5.27.2.2.1.3 | ColumnslbNewCfgUrlLbPathDelete | read-write | mandatory | Action object to delete an URL Path. When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anyt… |
| 1.3.6.1.4.1.1872.2.1.5.27.2.2.1.4 | ColumnslbNewCfgUrlLbBwmContract | read-write | mandatory | The BW contract for the load path. |
| 1.3.6.1.4.1.1872.2.1.5.27.2.3 | ScalarslbCurCfgUrlLbErrorMsg | read-only | mandatory | Customize error message to send back to client when switch cannot bind client's request to servers. |
| 1.3.6.1.4.1.1872.2.1.5.27.2.4 | ScalarslbNewCfgUrlLbErrorMsg | read-write | mandatory | Customize error message to send back to client when switch cannot bind client's request to servers. |
| 1.3.6.1.4.1.1872.2.1.5.27.2.5 | ScalarslbUrlLbPathTableMaxSize | read-only | mandatory | The maximum number of entries in SLB URL load balance table. |
| 1.3.6.1.4.1.1872.2.1.5.27.3 | NodertspUrlRedir | |||
| 1.3.6.1.4.1.1872.2.1.5.27.3.1 | ScalarrtspUrlExpTableMaxSize | read-only | mandatory | The maximum number of entries in RTSP URL expression table. |
| 1.3.6.1.4.1.1872.2.1.5.27.3.2 | TablertspCurCfgUrlExpTable | not-accessible | mandatory | The table of RTSP URL expressions. |
| 1.3.6.1.4.1.1872.2.1.5.27.3.2.1 | RowrtspCurCfgUrlExpTableEntry | not-accessible | mandatory | Information about a expression in the RTSP URL Redirection table. |
| 1.3.6.1.4.1.1872.2.1.5.27.3.2.1.1 | ColumnrtspCurCfgUrlExpIndex | read-only | mandatory | The RTSP URL expression table index. |
| 1.3.6.1.4.1.1872.2.1.5.27.3.2.1.2 | ColumnrtspCurCfgUrlExpression | read-only | mandatory | The expressions for RTSP URL redirection. |
| 1.3.6.1.4.1.1872.2.1.5.27.3.3 | TablertspNewCfgUrlExpTable | not-accessible | mandatory | The table of RTSP URL expressions. |
| 1.3.6.1.4.1.1872.2.1.5.27.3.3.1 | RowrtspNewCfgUrlExpTableEntry | not-accessible | mandatory | Information about a expression in the RTSP URL Redirection table. |
| 1.3.6.1.4.1.1872.2.1.5.27.3.3.1.1 | ColumnrtspNewCfgUrlExpIndex | read-only | mandatory | The RTSP URL expression table index. |
| 1.3.6.1.4.1.1872.2.1.5.27.3.3.1.2 | ColumnrtspNewCfgUrlExpression | read-write | mandatory | The expression for RTSP URL redirection. |
| 1.3.6.1.4.1.1872.2.1.5.27.3.3.1.3 | ColumnrtspNewCfgUrlExpDelete | read-write | mandatory | Action object to delete an RTSP URL expression. When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the va… |
| 1.3.6.1.4.1.1872.2.1.5.28 | ScalarslbCurCfgPmask | read-only | mandatory | The persistent mask - corresponding to the pmask command of the slb configuration menu. |
| 1.3.6.1.4.1.1872.2.1.5.29 | ScalarslbNewCfgPmask | read-write | mandatory | The persistent mask - corresponding to the pmask command of the slb configuration menu. |
| 1.3.6.1.4.1.1872.2.1.5.30 | ScalarslbCurCfgGrace | read-only | mandatory | Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1). |
| 1.3.6.1.4.1.1872.2.1.5.31 | ScalarslbNewCfgGrace | read-write | mandatory | Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1). |
| 1.3.6.1.4.1.1872.2.1.5.32 | TableslbCurCfgPeerTable | not-accessible | mandatory | The table of Synch Peer Switch configuration in the current_config. |
| 1.3.6.1.4.1.1872.2.1.5.32.1 | RowslbCurCfgPeerEntry | not-accessible | mandatory | Information about Synch Peer Switch configuration. |
| 1.3.6.1.4.1.1872.2.1.5.32.1.1 | ColumnslbCurCfgPeerIndex | read-only | mandatory | The index for synch peer switchs. |
| 1.3.6.1.4.1.1872.2.1.5.32.1.2 | ColumnslbCurCfgPeerIpAddr | read-only | mandatory | The IP address of the peer switch. |
| 1.3.6.1.4.1.1872.2.1.5.32.1.3 | ColumnslbCurCfgPeerState | read-only | mandatory | Enable or disable the peer switch. |
| 1.3.6.1.4.1.1872.2.1.5.33 | TableslbNewCfgPeerTable | not-accessible | mandatory | The table of Synch Peer Switch configuration in the new_config. |
| 1.3.6.1.4.1.1872.2.1.5.33.1 | RowslbNewCfgPeerEntry | not-accessible | mandatory | Information about synch peer switch configuration. |
| 1.3.6.1.4.1.1872.2.1.5.33.1.1 | ColumnslbNewCfgPeerIndex | read-only | mandatory | The index number for synch peer switchs. |
| 1.3.6.1.4.1.1872.2.1.5.33.1.2 | ColumnslbNewCfgPeerIpAddr | read-write | mandatory | The IP address of the peer switch. |
| 1.3.6.1.4.1.1872.2.1.5.33.1.3 | ColumnslbNewCfgPeerState | read-write | mandatory | Enable or disable the peer switch. |
| 1.3.6.1.4.1.1872.2.1.5.33.1.4 | ColumnslbNewCfgPeerDelete | read-write | mandatory | By setting the value to delete(2), the entire row is deleted. |
| 1.3.6.1.4.1.1872.2.1.5.34 | ScalarslbCurCfgSyncFilt | read-only | mandatory | Enable or disable synch filter configuration. |
| 1.3.6.1.4.1.1872.2.1.5.35 | ScalarslbNewCfgSyncFilt | read-write | mandatory | Enable or disable synch filter configuration. |
| 1.3.6.1.4.1.1872.2.1.5.36 | ScalarslbCurCfgSyncPort | read-only | mandatory | Enable or disable synch port configuration. |
| 1.3.6.1.4.1.1872.2.1.5.37 | ScalarslbNewCfgSyncPort | read-write | mandatory | Enable or disable synch port configuration. |
| 1.3.6.1.4.1.1872.2.1.5.38 | ScalarslbCurCfgSyncVrrp | read-only | mandatory | Enable or disable synch VRRP Priorities. |
| 1.3.6.1.4.1.1872.2.1.5.39 | ScalarslbNewCfgSyncVrrp | read-write | mandatory | Enable or disable synch VRRP Priorities. |
| 1.3.6.1.4.1.1872.2.1.5.40 | ScalarslbCurCfgSyncPip | read-only | mandatory | Enable or disable synch proxy IP addresses. |
| 1.3.6.1.4.1.1872.2.1.5.41 | ScalarslbNewCfgSyncPip | read-write | mandatory | Enable or disable synch proxy IP addresses. |
| 1.3.6.1.4.1.1872.2.1.5.42 | ScalarslbCurCfgVirtMatrixArch | read-only | mandatory | Enable or disable Virtual Matrix Architecture. |
| 1.3.6.1.4.1.1872.2.1.5.43 | ScalarslbNewCfgVirtMatrixArch | read-write | mandatory | Enable or disable Virtual Matrix Architecture. |
| 1.3.6.1.4.1.1872.2.1.5.44 | ScalarslbCurCfgSyncSfo | read-only | mandatory | Enable or disable synch stateful failover. |
| 1.3.6.1.4.1.1872.2.1.5.45 | ScalarslbNewCfgSyncSfo | read-write | mandatory | Enable or disable synch stateful failover. |
| 1.3.6.1.4.1.1872.2.1.5.46 | ScalarslbCurCfgSyncSfoUpdatePeriod | read-only | mandatory | The stateful failover update period in seconds. |
| 1.3.6.1.4.1.1872.2.1.5.47 | ScalarslbNewCfgSyncSfoUpdatePeriod | read-write | mandatory | The stateful failover update period in seconds. |
| 1.3.6.1.4.1.1872.2.1.5.48 | TableslbCurCfgRealServPortTable | not-accessible | mandatory | The table of real server service ports. |
| 1.3.6.1.4.1.1872.2.1.5.48.1 | RowslbCurCfgRealServPortEntry | not-accessible | mandatory | A row in the real server service ports table. |
| 1.3.6.1.4.1.1872.2.1.5.48.1.1 | ColumnslbCurCfgRealServIndex | read-only | mandatory | The number of the real server. |
| 1.3.6.1.4.1.1872.2.1.5.48.1.2 | ColumnslbCurCfgRealServPortIndex | read-only | mandatory | The port index. This has no external meaning |
| 1.3.6.1.4.1.1872.2.1.5.48.1.3 | ColumnslbCurCfgRealServRealPort | read-only | mandatory | The layer4 real service port number. |
| 1.3.6.1.4.1.1872.2.1.5.49 | TableslbNewCfgRealServPortTable | not-accessible | mandatory | The table of real server service ports. |
| 1.3.6.1.4.1.1872.2.1.5.49.1 | RowslbNewCfgRealServPortEntry | not-accessible | mandatory | A row in the real server service ports table. |
| 1.3.6.1.4.1.1872.2.1.5.49.1.1 | ColumnslbNewCfgRealServIndex | read-only | mandatory | The number of the real server. |
| 1.3.6.1.4.1.1872.2.1.5.49.1.2 | ColumnslbNewCfgRealServPortIndex | read-only | mandatory | The port index. This has no external meaning |
| 1.3.6.1.4.1.1872.2.1.5.49.1.3 | ColumnslbNewCfgRealServRealPort | read-write | mandatory | The layer4 real service port number. |
| 1.3.6.1.4.1.1872.2.1.5.49.1.4 | ColumnslbNewCfgRealServPortDelete | read-write | mandatory | When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe… |
| 1.3.6.1.4.1.1872.2.1.5.50 | TableslbCurCfgUrlBwmTable | not-accessible | mandatory | The table of URL based BWM for Virtual Services. |
| 1.3.6.1.4.1.1872.2.1.5.50.1 | RowslbCurCfgUrlBwmEntry | not-accessible | mandatory | A row in the URL based BWM virtual services table. |
| 1.3.6.1.4.1.1872.2.1.5.50.1.1 | ColumnslbCurCfgUrlBwmVirtServIndex | read-only | mandatory | The number of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.50.1.2 | ColumnslbCurCfgUrlBwmVirtServiceIndex | read-only | mandatory | The service index. This has no external meaning |
| 1.3.6.1.4.1.1872.2.1.5.50.1.3 | ColumnslbCurCfgUrlBwmUrlId | read-only | mandatory | The URL Path Identifier. |
| 1.3.6.1.4.1.1872.2.1.5.50.1.4 | ColumnslbCurCfgUrlBwmContract | read-only | mandatory | The BW contract number. |
| 1.3.6.1.4.1.1872.2.1.5.51 | TableslbNewCfgUrlBwmTable | not-accessible | mandatory | The table of URL based BWM for Virtual Services. |
| 1.3.6.1.4.1.1872.2.1.5.51.1 | RowslbNewCfgUrlBwmEntry | not-accessible | mandatory | A row in the URL based BWM virtual services table. |
| 1.3.6.1.4.1.1872.2.1.5.51.1.1 | ColumnslbNewCfgUrlBwmVirtServIndex | read-only | mandatory | The number of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.5.51.1.2 | ColumnslbNewCfgUrlBwmVirtServiceIndex | read-only | mandatory | The service index. This has no external meaning |
| 1.3.6.1.4.1.1872.2.1.5.51.1.3 | ColumnslbNewCfgUrlBwmUrlId | read-only | mandatory | The URL Path Identifier. |
| 1.3.6.1.4.1.1872.2.1.5.51.1.4 | ColumnslbNewCfgUrlBwmContract | read-write | mandatory | The BW contract number. |
| 1.3.6.1.4.1.1872.2.1.5.51.1.5 | ColumnslbNewCfgUrlBwmDelete | read-write | mandatory | When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe… |
| 1.3.6.1.4.1.1872.2.1.5.52 | NodeslbRurl | |||
| 1.3.6.1.4.1.1872.2.1.5.52.1 | NodeslbRurlGeneral | |||
| 1.3.6.1.4.1.1872.2.1.5.52.1.1 | ScalarslbCurCfgRurlGenDeny | read-only | mandatory | This is for controlling if the switch should deny packets from passing through to L2 in the event that the switch runs out of buffer resources. |
| 1.3.6.1.4.1.1872.2.1.5.52.1.2 | ScalarslbNewCfgRurlGenDeny | read-write | mandatory | This is for controlling if the switch should deny packets from passing through to L2 in the event that the switch runs out of buffer resources. |
| 1.3.6.1.4.1.1872.2.1.5.52.2 | ScalarslbRurlDportTableMaxSize | read-only | mandatory | The maximum number of entries in RURL destination port table. |
| 1.3.6.1.4.1.1872.2.1.5.52.3 | TableslbCurCfgRurlDportTable | not-accessible | mandatory | The table of RURL destination port ranges in current_config. |
| 1.3.6.1.4.1.1872.2.1.5.52.3.1 | RowslbCurCfgRurlDportTableEntry | not-accessible | mandatory | Information about a destination port range for RURL parsing. |
| 1.3.6.1.4.1.1872.2.1.5.52.3.1.1 | ColumnslbCurCfgRurlDportIndex | read-only | mandatory | The RURL destination port table index. |
| 1.3.6.1.4.1.1872.2.1.5.52.3.1.2 | ColumnslbCurCfgRurlDportLowPort | read-only | mandatory | The first destination port in the port range. |
| 1.3.6.1.4.1.1872.2.1.5.52.3.1.3 | ColumnslbCurCfgRurlDportHighPort | read-only | mandatory | The last destination port in the port range. |
| 1.3.6.1.4.1.1872.2.1.5.52.4 | TableslbNewCfgRurlDportTable | not-accessible | mandatory | The table of RURL destination port ranges in new_config. |
| 1.3.6.1.4.1.1872.2.1.5.52.4.1 | RowslbNewCfgRurlDportTableEntry | not-accessible | mandatory | Information about a destination port range for RURL parsing. |
| 1.3.6.1.4.1.1872.2.1.5.52.4.1.1 | ColumnslbNewCfgRurlDportIndex | read-write | mandatory | The RURL destination port table index. |
| 1.3.6.1.4.1.1872.2.1.5.52.4.1.2 | ColumnslbNewCfgRurlDportLowPort | read-write | mandatory | The first destination port in the port range. |
| 1.3.6.1.4.1.1872.2.1.5.52.4.1.3 | ColumnslbNewCfgRurlDportHighPort | read-write | mandatory | The last destination port in the port range. |
| 1.3.6.1.4.1.1872.2.1.5.52.4.1.4 | ColumnslbNewCfgRurlDportDelete | read-write | mandatory | Action object to delete an destination port/range. When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the… |
| 1.3.6.1.4.1.1872.2.1.5.53 | ScalarslbRealServPortTableMaxSize | read-only | mandatory | The maximum number of entries in SLB RealServPortTable. |
| 1.3.6.1.4.1.1872.2.1.5.54 | ScalarslbPortTableMaxSize | read-only | mandatory | The maximum number of entries in SLB Port Table. |
| 1.3.6.1.4.1.1872.2.1.5.55 | ScalarslbVirtServicesTableMaxSize | read-only | mandatory | The maximum number of entries in SLB Virtual Services Table. |
| 1.3.6.1.4.1.1872.2.1.5.56 | ScalarslbUrlBwmTableMaxSize | read-only | mandatory | The maximum number of entries in SLB URL BWM Table. |
| 1.3.6.1.4.1.1872.2.1.5.57 | ScalarslbPeerTableMaxSize | read-only | mandatory | The maximum number of entries in SLB Peer Table. |
| 1.3.6.1.4.1.1872.2.1.5.58 | ScalarslbCurCfgFastage | read-only | mandatory | Session table fast-age (1 sec) period bit shift. |
| 1.3.6.1.4.1.1872.2.1.5.59 | ScalarslbNewCfgFastage | read-write | mandatory | Session table fast-age (1 sec) period bit shift. |
| 1.3.6.1.4.1.1872.2.1.5.60 | ScalarslbCurCfgSlowage | read-only | mandatory | Session table slow-age (2 min) period bit shift. |
| 1.3.6.1.4.1.1872.2.1.5.61 | ScalarslbNewCfgSlowage | read-write | mandatory | Session table slow-age (2 min) period bit shift. |
| 1.3.6.1.4.1.1872.2.1.5.62 | NodeslbWaphc | |||
| 1.3.6.1.4.1.1872.2.1.5.62.1 | ScalarslbCurCfgWaphcWSPPort | read-only | mandatory | The WSP port number to health check. |
| 1.3.6.1.4.1.1872.2.1.5.62.2 | ScalarslbNewCfgWaphcWSPPort | read-write | mandatory | The WSP port number to health check. |
| 1.3.6.1.4.1.1872.2.1.5.62.3 | ScalarslbCurCfgWaphcOffset | read-only | mandatory | The offset in received WSP packet. |
| 1.3.6.1.4.1.1872.2.1.5.62.4 | ScalarslbNewCfgWaphcOffset | read-write | mandatory | The offset in received WSP packet. |
| 1.3.6.1.4.1.1872.2.1.5.62.5 | ScalarslbCurCfgWaphcSndContent | read-only | mandatory | The content to be sent to the WAP gateway. |
| 1.3.6.1.4.1.1872.2.1.5.62.6 | ScalarslbNewCfgWaphcSndContent | read-write | mandatory | The content to be sent to the WAP gateway. |
| 1.3.6.1.4.1.1872.2.1.5.62.7 | ScalarslbCurCfgWaphcRcvContent | read-only | mandatory | The content to be received from the WAP gateway. |
| 1.3.6.1.4.1.1872.2.1.5.62.8 | ScalarslbNewCfgWaphcRcvContent | read-write | mandatory | The content to be received from the WAP gateway. |
| 1.3.6.1.4.1.1872.2.1.5.62.9 | ScalarslbCurCfgWaphcWTLSPort | read-only | mandatory | The WTLS port number to health check. |
| 1.3.6.1.4.1.1872.2.1.5.62.10 | ScalarslbNewCfgWaphcWTLSPort | read-write | mandatory | The WTLS port number to health check. |
| 1.3.6.1.4.1.1872.2.1.5.63 | NodeslbWap | |||
| 1.3.6.1.4.1.1872.2.1.5.63.1 | ScalarslbCurCfgWapTpcp | read-only | mandatory | Enable or disable WAP load balancing. |
| 1.3.6.1.4.1.1872.2.1.5.63.2 | ScalarslbNewCfgWapTpcp | read-write | mandatory | Enable or disable WAP load balancing. |
| 1.3.6.1.4.1.1872.2.1.5.63.3 | ScalarslbCurCfgWapDebug | read-only | mandatory | WAP Debug level. |
| 1.3.6.1.4.1.1872.2.1.5.63.4 | ScalarslbNewCfgWapDebug | read-write | mandatory | WAP Debug level. |
| 1.3.6.1.4.1.1872.2.1.5.64 | ScalarslbCurCfgSyncBwm | read-only | mandatory | Enable or disable syncing BWM configuration. |
| 1.3.6.1.4.1.1872.2.1.5.65 | ScalarslbNewCfgSyncBwm | read-write | mandatory | Enable or disable syncing BWM configuration. |
| 1.3.6.1.4.1.1872.2.1.5.66 | ScalarslbCurCfgTpcp | read-only | mandatory | Enable or disable Transparent Proxy Cache Protocol. |
| 1.3.6.1.4.1.1872.2.1.5.67 | ScalarslbNewCfgTpcp | read-write | mandatory | Enable or disable Transparent Proxy Cache Protocol. |
| 1.3.6.1.4.1.1872.2.1.5.68 | ScalarslbCurCfgMetricInterval | read-only | mandatory | The interval of response and bandwidth metric updates. |
| 1.3.6.1.4.1.1872.2.1.5.69 | ScalarslbNewCfgMetricInterval | read-write | mandatory | The interval of response and bandwidth metric updates. |
| 1.3.6.1.4.1.1872.2.1.5.70 | ScalarslbCurCfgRealGroupIdslb | read-only | mandatory | The real server group number for IDSLB. |
| 1.3.6.1.4.1.1872.2.1.5.71 | ScalarslbNewCfgRealGroupIdslb | read-write | mandatory | The real server group number for IDSLB. |
| 1.3.6.1.4.1.1872.2.1.5.72 | ScalarslbCurCfgLdapVersion | read-only | mandatory | The version number for LDAP. |
| 1.3.6.1.4.1.1872.2.1.5.73 | ScalarslbNewCfgLdapVersion | read-write | mandatory | The Version number of LDAP. |
| 1.3.6.1.4.1.1872.2.1.5.74 | ScalarslbCurCfgIsdInterval | read-only | mandatory | The interval of ISD health checks. |
| 1.3.6.1.4.1.1872.2.1.5.75 | ScalarslbNewCfgIsdInterval | read-write | mandatory | The interval of ISD health checks. |
| 1.3.6.1.4.1.1872.2.1.5.76 | ScalarslbCurCfgIsdRetry | read-only | mandatory | The number of failed attemps to declare ISD down. |
| 1.3.6.1.4.1.1872.2.1.5.77 | ScalarslbNewCfgIsdRetry | read-write | mandatory | The number of failed attemps to declare ISD down. |
| 1.3.6.1.4.1.1872.2.1.5.78 | ScalarslbCurCfgIsdRestr | read-only | mandatory | The number of successful attemps to declare ISD up. |
| 1.3.6.1.4.1.1872.2.1.5.79 | ScalarslbNewCfgIsdRestr | read-write | mandatory | The number of successful attemps to declare ISD up. |
| 1.3.6.1.4.1.1872.2.1.5.80 | ScalarslbCurCfgIsdNumber | read-only | mandatory | The number of real servers used for ISDs. |
| 1.3.6.1.4.1.1872.2.1.5.81 | ScalarslbNewCfgIsdNumber | read-write | mandatory | The number of real servers used for ISDs. |
| 1.3.6.1.4.1.1872.2.1.5.82 | NodesynAttackDetCfg | |||
| 1.3.6.1.4.1.1872.2.1.5.82.1 | ScalarsynAttackCurCfgInterval | read-only | mandatory | The interval specified in seconds determines how frequently the switch checks for SYN attacks. |
| 1.3.6.1.4.1.1872.2.1.5.82.2 | ScalarsynAttackNewCfgInterval | read-write | mandatory | The interval specified in seconds determines how frequently the switch checks for SYN attacks. |
| 1.3.6.1.4.1.1872.2.1.5.82.3 | ScalarsynAttackCurCfgThreshhold | read-only | mandatory | The threshhold indicating the number of new half-open sessions per second. |
| 1.3.6.1.4.1.1872.2.1.5.82.4 | ScalarsynAttackNewCfgThreshhold | read-write | mandatory | The threshhold indicating the number of new half-open sessions per second. |
| 1.3.6.1.4.1.1872.2.1.5.83 | ScalarslbCurCfgTcpTimeWindow | read-only | mandatory | The time window for TCP rate limiting. |
| 1.3.6.1.4.1.1872.2.1.5.84 | ScalarslbNewCfgTcpTimeWindow | read-write | mandatory | The time window for TCP rate limiting. |
| 1.3.6.1.4.1.1872.2.1.5.85 | ScalarslbCurCfgTcpHoldDuration | read-only | mandatory | The hold down duration for TCP rate limiting. |
| 1.3.6.1.4.1.1872.2.1.5.86 | ScalarslbNewCfgTcpHoldDuration | read-write | mandatory | The hold down duration for TCP rate limiting. |
| 1.3.6.1.4.1.1872.2.1.5.87 | ScalarslbCurCfgAllowHttpHc | read-only | mandatory | Enable or disable allow HTTP health check on any port. If disabled the non-HTTP virtual services will use TCP Health Checks, if enabled the HTTP Content Health… |
| 1.3.6.1.4.1.1872.2.1.5.88 | ScalarslbNewCfgAllowHttpHc | read-write | mandatory | Enable or disable allow HTTP health check on any port. If disabled the non-HTTP virtual services will use TCP Health Checks, if enabled the HTTP Content Health… |
| 1.3.6.1.4.1.1872.2.1.8.2 | NodeslbStats | |||
| 1.3.6.1.4.1.1872.2.1.8.2.1 | TableslbStatPortMaintTable | not-accessible | mandatory | The table of SLB port maintenance statistics. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1 | RowslbStatPortMaintEntry | not-accessible | mandatory | A row in the SLB port maintenance statistcs table. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1.1 | ColumnslbStatPortMaintPortIndex | read-only | mandatory | The port number for which the statistics apply. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1.2 | ColumnslbStatPortMaintCurBindings | read-only | mandatory | The current number of bindings on the port. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1.3 | ColumnslbStatPortMaintBindingFails | read-only | mandatory | The total number of Binding failures on the port. A Binding Failure occurs when a port runs out of binding table entries. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1.4 | ColumnslbStatPortMaintNonTcpFrames | read-only | mandatory | The total number of non-TCP/IP frames dropped on the port. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1.5 | ColumnslbStatPortMaintTcpFragments | read-only | mandatory | The total number of TCP fragments dropped on the port. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1.6 | ColumnslbStatPortMaintUdpDatagrams | read-only | mandatory | The total number of UDP datagrams dropped on the port. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1.7 | ColumnslbStatPortMaintIncorrectVIPs | read-only | mandatory | The total number of frames with incorrect VIPs that are dropped on the port. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1.8 | ColumnslbStatPortMaintIncorrectVports | read-only | mandatory | The total number of frames with incorrect Virtual Port that are dropped on the port. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1.9 | ColumnslbStatPortMaintRealServerNoAvails | read-only | mandatory | The total number of frames that are dropped on the port because no real server is available. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1.10 | ColumnslbStatPortMaintFilteredDeniedFrames | read-only | mandatory | The total number of frames that are denied on the port by the filter. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1.11 | ColumnslbStatPortMaintCurBindings4Seconds | read-only | mandatory | The 4 second average current number of bindings on the port. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1.12 | ColumnslbStatPortMaintCurBindings64Seconds | read-only | mandatory | The 64 second average current number of bindings on the port. |
| 1.3.6.1.4.1.1872.2.1.8.2.1.1.13 | ColumnslbStatPortMaintVMAdiscards | read-only | mandatory | The total number of internal VMA frames dropped by the port. |
| 1.3.6.1.4.1.1872.2.1.8.2.2 | TableslbStatPortRealServerTable | not-accessible | mandatory | The port-server statistics table. This table shows the statistics of real servers that are connectted to switch ports. |
| 1.3.6.1.4.1.1872.2.1.8.2.2.1 | RowslbStatPortRealServerEntry | not-accessible | mandatory | A row in the port-server statistics table. |
| 1.3.6.1.4.1.1872.2.1.8.2.2.1.1 | ColumnslbStatPortRealServerPortIndex | read-only | mandatory | The port number that identifies the switch port. |
| 1.3.6.1.4.1.1872.2.1.8.2.2.1.2 | ColumnslbStatPortRealServerServerIndex | read-only | mandatory | The real server number that identifies the server. |
| 1.3.6.1.4.1.1872.2.1.8.2.2.1.3 | ColumnslbStatPortRealServerCurrSessions | read-only | mandatory | The current sessions for the real server. |
| 1.3.6.1.4.1.1872.2.1.8.2.2.1.4 | ColumnslbStatPortRealServerTotalSessions | read-only | mandatory | The total number of sessions for the real server. |
| 1.3.6.1.4.1.1872.2.1.8.2.2.1.5 | ColumnslbStatPortRealServerHCOctets | read-only | obsolete | The total number of octets received and transmitted out of the real server on a particular port. |
| 1.3.6.1.4.1.1872.2.1.8.2.2.1.6 | ColumnslbStatPortRealServerHCOctetsLow32 | read-only | mandatory | The lower 32 bit value of the total octets received and transmitted out of the real server on a particular port. |
| 1.3.6.1.4.1.1872.2.1.8.2.2.1.7 | ColumnslbStatPortRealServerHCOctetsHigh32 | read-only | mandatory | The higher 32 bit value of the total octets received and transmitted out of the real server on a particular port. |
| 1.3.6.1.4.1.1872.2.1.8.2.3 | ScalarslbStatMaintBackupServActs | read-only | mandatory | The total number of times that backup servers become active due to failure of primary servers. |
| 1.3.6.1.4.1.1872.2.1.8.2.4 | ScalarslbStatMaintOverflowServActs | read-only | mandatory | The total number of times that backup servers become active due to primary servers reach overflow situation. |
| 1.3.6.1.4.1.1872.2.1.8.2.5 | TableslbStatRServerTable | not-accessible | mandatory | The real server statistics table. |
| 1.3.6.1.4.1.1872.2.1.8.2.5.1 | RowslbStatRServerEntry | not-accessible | mandatory | The statistics of a particular real server. |
| 1.3.6.1.4.1.1872.2.1.8.2.5.1.1 | ColumnslbStatRServerIndex | read-only | mandatory | The real server number that identifies the server. |
| 1.3.6.1.4.1.1872.2.1.8.2.5.1.2 | ColumnslbStatRServerCurrSessions | read-only | mandatory | The number of sessions that are currently handled by the real server. |
| 1.3.6.1.4.1.1872.2.1.8.2.5.1.3 | ColumnslbStatRServerTotalSessions | read-only | mandatory | The total number of sessions that are handled by the real server. |
| 1.3.6.1.4.1.1872.2.1.8.2.5.1.4 | ColumnslbStatRServerFailures | read-only | mandatory | The total number of times that the real server is claimed down. |
| 1.3.6.1.4.1.1872.2.1.8.2.5.1.5 | ColumnslbStatRServerHighestSessions | read-only | mandatory | The highest sessions that have been handled by the real server. |
| 1.3.6.1.4.1.1872.2.1.8.2.5.1.6 | ColumnslbStatRServerHCOctets | read-only | obsolete | The total number of octets received and transmitted out of the real server. |
| 1.3.6.1.4.1.1872.2.1.8.2.5.1.7 | ColumnslbStatRServerHCOctetsLow32 | read-only | mandatory | The lower 32 bit value of octets received and transmitted out of the real server. |
| 1.3.6.1.4.1.1872.2.1.8.2.5.1.8 | ColumnslbStatRServerHCOctetsHigh32 | read-only | mandatory | The higher 32 bit value of octets received and transmitted out of the real server. |
| 1.3.6.1.4.1.1872.2.1.8.2.6 | TableslbStatGroupTable | not-accessible | mandatory | The real server group statistics table. |
| 1.3.6.1.4.1.1872.2.1.8.2.6.1 | RowslbStatGroupEntry | not-accessible | mandatory | The statistics of a particular real server group. |
| 1.3.6.1.4.1.1872.2.1.8.2.6.1.1 | ColumnslbStatGroupIndex | read-only | mandatory | The real server group number that identifies the group. |
| 1.3.6.1.4.1.1872.2.1.8.2.6.1.2 | ColumnslbStatGroupCurrSessions | read-only | mandatory | The number of sessions that are currently handled by the real server group. |
| 1.3.6.1.4.1.1872.2.1.8.2.6.1.3 | ColumnslbStatGroupTotalSessions | read-only | mandatory | The total number of sessions that are handled by the real server group. |
| 1.3.6.1.4.1.1872.2.1.8.2.6.1.4 | ColumnslbStatGroupHighestSessions | read-only | mandatory | The highest sessions that have been handled by the real server group. |
| 1.3.6.1.4.1.1872.2.1.8.2.6.1.5 | ColumnslbStatGroupHCOctets | read-only | obsolete | The total number of octets received and transmitted out of the real server group. |
| 1.3.6.1.4.1.1872.2.1.8.2.6.1.6 | ColumnslbStatGroupHCOctetsLow32 | read-only | mandatory | The lower 32 bit value of octets received and transmitted out of the real server group. |
| 1.3.6.1.4.1.1872.2.1.8.2.6.1.7 | ColumnslbStatGroupHCOctetsHigh32 | read-only | mandatory | The higher 32 bit value of octets received and transmitted out of the real server group. |
| 1.3.6.1.4.1.1872.2.1.8.2.7 | TableslbStatVServerTable | not-accessible | mandatory | The virtual server statistics table. |
| 1.3.6.1.4.1.1872.2.1.8.2.7.1 | RowslbStatVServerEntry | not-accessible | mandatory | The statistics of a particular virtual server group. |
| 1.3.6.1.4.1.1872.2.1.8.2.7.1.1 | ColumnslbStatVServerIndex | read-only | mandatory | The virtual server number that identifies the server. |
| 1.3.6.1.4.1.1872.2.1.8.2.7.1.2 | ColumnslbStatVServerCurrSessions | read-only | mandatory | The number of sessions that are currently handled by the virtual server. |
| 1.3.6.1.4.1.1872.2.1.8.2.7.1.3 | ColumnslbStatVServerTotalSessions | read-only | mandatory | The total number of sessions that are handled by the virtual server. |
| 1.3.6.1.4.1.1872.2.1.8.2.7.1.4 | ColumnslbStatVServerHighestSessions | read-only | mandatory | The highest sessions that have been handled by the virtual server. |
| 1.3.6.1.4.1.1872.2.1.8.2.7.1.5 | ColumnslbStatVServerHCOctets | read-only | obsolete | The total number of octets received and transmitted out of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.8.2.7.1.6 | ColumnslbStatVServerHCOctetsLow32 | read-only | mandatory | The lower 32 bit value of octets received and transmitted out of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.8.2.7.1.7 | ColumnslbStatVServerHCOctetsHigh32 | read-only | mandatory | The higher 32 bit value of octets received and transmitted out of the virtual server. |
| 1.3.6.1.4.1.1872.2.1.8.2.7.1.8 | ColumnslbStatVServerHeaderHits | read-only | mandatory | The current HTTP header hits. |
| 1.3.6.1.4.1.1872.2.1.8.2.7.1.9 | ColumnslbStatVServerHeaderMisses | read-only | mandatory | The current HTTP header misses. |
| 1.3.6.1.4.1.1872.2.1.8.2.7.1.10 | ColumnslbStatVServerHeaderTotalSessions | read-only | mandatory | The total HTTP header sessions. |
| 1.3.6.1.4.1.1872.2.1.8.2.7.1.11 | ColumnslbStatVServerCookieRewrites | read-only | mandatory | The total Cookie Rewrites. |
| 1.3.6.1.4.1.1872.2.1.8.2.7.1.12 | ColumnslbStatVServerCookieInserts | read-only | mandatory | The total Cookie Inserts. |
| 1.3.6.1.4.1.1872.2.1.8.2.8 | NodeslbMaintStats | |||
| 1.3.6.1.4.1.1872.2.1.8.2.8.1 | ScalarslbIncorrectVirtServs | read-only | mandatory | Incorrect Virtual Servers specified for Server Load Balancing. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.2 | ScalarslbIncorrectVports | read-only | mandatory | Incorrect Virtual ports specified for Server Load Balancing. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.3 | ScalarslbNoRealServs | read-only | mandatory | No Real Servers specified for Server Load Balancing. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4 | NodewapMaintStats | |||
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.1 | NoderadiusAcctReqsStats | |||
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.1.1 | ScalarradiusAcctReqs | read-only | mandatory | Radius Account Request. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.1.2 | ScalarradiusAcctWrapReqs | read-only | mandatory | Radius Account Wrap Request. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.1.3 | ScalarradiusAcctStartReqs | read-only | mandatory | Radius Account Start Request. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.1.4 | ScalarradiusAcctUpdateReqs | read-only | mandatory | Radius Account Update Request. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.1.5 | ScalarradiusAcctStopReqs | read-only | mandatory | Radius Account stop Request. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.1.6 | ScalarradiusAcctBadReqs | read-only | mandatory | Radius Account Bad Request. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.1.7 | ScalarradiusAcctAddSessionReqs | read-only | mandatory | Radius Account add session Request. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.1.8 | ScalarradiusAcctDeleteSessionReqs | read-only | mandatory | Radius Account delete session Request. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.1.9 | ScalarradiusAcctReqFailsQFull | read-only | mandatory | Radius Account request fails Queue Full. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.1.10 | ScalarradiusAcctReqFailsSPDead | read-only | mandatory | Radius Account request fails SP Dead. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.1.11 | ScalarradiusAcctReqFailsDMAFails | read-only | mandatory | Radius Account request fails DMA fails. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.1.12 | ScalarradiusAcctMaxEntriesInUse | read-only | mandatory | Radius Account Maximum Entries in use. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.2 | NodetpcpAddSessReqsStats | |||
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.2.1 | ScalartpcpAddSessReqs | read-only | mandatory | WAP add Session requests. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.2.2 | ScalartpcpAddSessReqsFailsQFull | read-only | mandatory | WAP add Session Fails as the Queue is Full. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.2.3 | ScalartpcpAddSessReqsFailsSPDead | read-only | mandatory | WAP add Session Fails as the SP is dead. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.2.4 | ScalartpcpAddSessReqsEntriesInUse | read-only | mandatory | WAP add Session Entries currently in use. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.2.5 | ScalartpcpAddSessReqsMaxEntriesInUse | read-only | mandatory | The allowable maximum number of WAP add Session Entries. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.3 | NodetpcpDeleteSessReqsStats | |||
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.3.1 | ScalartpcpDeleteSessReqs | read-only | mandatory | TPCP Delete Session Requests. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.3.2 | ScalartpcpDeleteSessReqsFailsQFull | read-only | mandatory | TPCP Delete Session Fails as the Queue is Full. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.3.3 | ScalartpcpDeleteSessReqsFailsSPDead | read-only | mandatory | TPCP Delete Session Fails as the SP is dead. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.3.4 | ScalartpcpDeleteSessReqsEntriesInUse | read-only | mandatory | TPCP Delete Session Entries currently in use. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.3.5 | ScalartpcpDeleteSessReqsMaxEntriesInUse | read-only | mandatory | The allowable maximum number of TPCP delete Session Entries. |
| 1.3.6.1.4.1.1872.2.1.8.2.8.4.4 | ScalarwapRequestToWrongSP | read-only | mandatory | The WAP delete Session Entries sent to wrong SP. |
| 1.3.6.1.4.1.1872.2.1.8.6 | NodefilterStats | |||
| 1.3.6.1.4.1.1872.2.1.8.6.1 | TablefltStatTable | not-accessible | mandatory | The filter statistics table. |
| 1.3.6.1.4.1.1872.2.1.8.6.1.1 | RowfltStatTableEntry | not-accessible | mandatory | A row in filter statistics table. |
| 1.3.6.1.4.1.1872.2.1.8.6.1.1.1 | ColumnfltStatFltIndex | read-only | mandatory | The number that identifies the filter. |
| 1.3.6.1.4.1.1872.2.1.8.6.1.1.2 | ColumnfltStatFltFirings | read-only | mandatory | The number of instances that the received packet matches the filter rule. |
| 1.3.6.1.4.1.1872.2.1.8.7 | NodegslbStats | |||
| 1.3.6.1.4.1.1872.2.1.8.7.1 | TablegslbStatRemRealServerTable | not-accessible | mandatory | The GSLB remote real server statistics table. |
| 1.3.6.1.4.1.1872.2.1.8.7.1.1 | RowgslbStatRemRealServerEntry | not-accessible | mandatory | A row in the remote real server statistics table. |
| 1.3.6.1.4.1.1872.2.1.8.7.1.1.1 | ColumngslbStatRemRealServerIndex | read-only | mandatory | The server number that identifies the remote real server. |
| 1.3.6.1.4.1.1872.2.1.8.7.1.1.2 | ColumngslbStatRemRealServerDnsHandoffs | read-only | mandatory | The number of DNS hanfoffs by the remote real server. |
| 1.3.6.1.4.1.1872.2.1.8.7.1.1.3 | ColumngslbStatRemRealServerHttpRedirs | read-only | mandatory | The number of HTTP redirections by the remote real server. |
| 1.3.6.1.4.1.1872.2.1.8.8 | NodegslbMaintStats | |||
| 1.3.6.1.4.1.1872.2.1.8.8.1 | ScalargslbStatMaintInGoodSiteUpdates | read-only | mandatory | The number of good remote site updates which are received. |
| 1.3.6.1.4.1.1872.2.1.8.8.2 | ScalargslbStatMaintInBadSiteUpdates | read-only | mandatory | The number of bad remote site updates which are received. |
| 1.3.6.1.4.1.1872.2.1.8.10 | NodeurlStats | |||
| 1.3.6.1.4.1.1872.2.1.8.10.1 | NodeurlRedirStats | |||
| 1.3.6.1.4.1.1872.2.1.8.10.1.1 | ScalarurlStatRedRedirs | read-only | mandatory | The number of instances that the received packet matches the specified URL expressions and redirected to specified group of real servers. |
| 1.3.6.1.4.1.1872.2.1.8.10.1.2 | ScalarurlStatRedOrigSrvs | read-only | mandatory | The number of instances that the received packet is sent to the origin server due to mis-match with the specified URL expressions or detecting of HTTP non-GETs… |
| 1.3.6.1.4.1.1872.2.1.8.10.1.3 | ScalarurlStatRedNonGets | read-only | mandatory | The number of instances that the received packet contains none GETs(POST ,HEAD ,PUT..) methods. |
| 1.3.6.1.4.1.1872.2.1.8.10.1.4 | ScalarurlStatRedCookie | read-only | mandatory | The number of instances that the received packet contains a 'Cookie: ' header. |
| 1.3.6.1.4.1.1872.2.1.8.10.1.5 | ScalarurlStatRedNoCache | read-only | mandatory | The number of instances that the received packet contains a no-cache header value. |
| 1.3.6.1.4.1.1872.2.1.8.10.2 | NodeurlSlbStats | |||
| 1.3.6.1.4.1.1872.2.1.8.10.2.1 | TableurlStatSlbPathTable | not-accessible | mandatory | The statistics table of instances that URL pathes matched. |
| 1.3.6.1.4.1.1872.2.1.8.10.2.1.1 | RowurlStatSlbPathTableEntry | not-accessible | mandatory | Information about the number of instances that are load-balanced due to match of a particular URL path. |
| 1.3.6.1.4.1.1872.2.1.8.10.2.1.1.1 | ColumnurlStatSlbPathIndex | read-only | mandatory | The URL path table index. |
| 1.3.6.1.4.1.1872.2.1.8.10.2.1.1.2 | ColumnurlStatSlbPathHits | read-only | mandatory | The number of instances that are load-balanced due to match of the particular URL path. |
| 1.3.6.1.4.1.1872.2.1.8.11 | NodetcpStats | |||
| 1.3.6.1.4.1.1872.2.1.8.11.1 | ScalartcpStatCurConns | read-only | mandatory | The number of outstanding TCP current connections have been established. |
| 1.3.6.1.4.1.1872.2.1.8.11.2 | ScalartcpStatHalfOpens | read-only | mandatory | The number of outstanding TCP connections have been half opened. This statistics is valid only when URL parsing has been truned on. It is incremented when the … |
| 1.3.6.1.4.1.1872.2.1.8.14 | NodeftpStats | |||
| 1.3.6.1.4.1.1872.2.1.8.14.1 | NodeftpSlbStats | |||
| 1.3.6.1.4.1.1872.2.1.8.14.1.1 | ScalarftpSlbStatTotal | read-only | mandatory | The total number of ftp control sesssion for SLB received after FTP parsing turn on. |
| 1.3.6.1.4.1.1872.2.1.8.14.1.2 | ScalarftpNatStatTotal | read-only | mandatory | The total number of FTP control session for NAT received after active FTP is turn on. |
| 1.3.6.1.4.1.1872.2.1.8.18 | NoderurlStats | |||
| 1.3.6.1.4.1.1872.2.1.8.18.1 | NoderurlErrorStats | |||
| 1.3.6.1.4.1.1872.2.1.8.18.1.1 | ScalarrurlErrorStatConnect | read-only | mandatory | Total number of session connect errors to the iSD. |
| 1.3.6.1.4.1.1872.2.1.8.18.1.2 | ScalarrurlErrorStatPack | read-only | mandatory | Total number of errors associated with packaging the RURL data frame received from the iSD. |
| 1.3.6.1.4.1.1872.2.1.8.18.1.3 | ScalarrurlErrorStatUnpack | read-only | mandatory | Total number of errors associated with unpackaging the RURL data frame received from the iSD. |
| 1.3.6.1.4.1.1872.2.1.8.18.1.4 | ScalarrurlErrorStatDma | read-only | mandatory | Total number of DMA write errors. |
| 1.3.6.1.4.1.1872.2.1.8.18.1.5 | ScalarrurlErrorStatBuf | read-only | mandatory | Total number of errors associated with no available buffers to to store the RURL redirection information. |
| 1.3.6.1.4.1.1872.2.1.8.18.1.6 | ScalarrurlErrorStatBufWrap | read-only | mandatory | Total number of errors associated with buffer wrap copies. |
| 1.3.6.1.4.1.1872.2.1.8.18.1.7 | ScalarrurlErrorStatProto | read-only | mandatory | Total number of errors associated with packets containing an invalid protocol type. Expected protocol types are TCP and UDP. |
| 1.3.6.1.4.1.1872.2.1.8.18.2 | NoderurlInfoStats | |||
| 1.3.6.1.4.1.1872.2.1.8.18.2.1 | ScalarrurlInfoStatClientWrap | read-only | mandatory | Total number of client packets processed using frame wrap buffers. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.2 | ScalarrurlInfoStatServerWrap | read-only | mandatory | Total number of server packets processed using frame wrap buffers. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.3 | ScalarrurlInfoStatBufWrap | read-only | mandatory | Total number of packets processed using RURL wrap copy mechanism. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.4 | ScalarrurlInfoStatFreeRingCalls | read-only | mandatory | Total number of RURL sequence buffer frees. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.5 | ScalarrurlInfoStatClientResets | read-only | mandatory | Total number of client resets by the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.6 | ScalarrurlInfoStatServerResets | read-only | mandatory | Total number of server resets by the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.7 | ScalarrurlInfoStatFramePassThru | read-only | mandatory | Total number of packets dropped to L2 processing due to the switch running out of resources. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.8 | ScalarrurlInfoStatParseFiltMiss | read-only | mandatory | Total number of packets leaking from RURL parsing to URL parsing. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.9 | ScalarrurlInfoStatExceedBufLen | read-only | mandatory | Total number of occurences where the client request bytes exceed the maximum buffer size allocated by the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.10 | ScalarrurlInfoStatExceedFrameDepth | read-only | mandatory | Total number of occurences where the client request bytes exceed the maximum buffer depth allocated by the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.11 | ScalarrurlInfoStatZeroContentLen | read-only | mandatory | Total number of occurences where the Content-Length of the HTTP request is zero. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.12 | ScalarrurlInfoStatNonTypicalOffsets | read-only | mandatory | Total number of occurences where the RURL header offsets are non-typical. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.13 | ScalarrurlInfoStatFINRSTSessSetup | read-only | mandatory | Total number of occurences where a FIN or RST packet is used to establish a new session in the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.14 | ScalarrurlInfoStatPSHSessSetup | read-only | mandatory | Total number of occurences where a PSH packet is used to establish a new session in the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.15 | ScalarrurlInfoStatNonSYNSessSetup | read-only | mandatory | Total number of occurences where a non-SYN packet is used to establish a new session in the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.16 | ScalarrurlInfoStatL7BindCalls | read-only | mandatory | Total number of requests to bind a session. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.17 | ScalarrurlInfoStatSessSetups | read-only | mandatory | Total number of RURL session setups encountered. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.18 | ScalarrurlInfoStatMiscProcess | read-only | mandatory | Total number of sessions falling through the filter processing. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.19 | ScalarrurlInfoStatClientPktsIn | read-only | mandatory | Total number of client packets processed by the RURL filter. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.20 | ScalarrurlInfoStatClientSYNsIn | read-only | mandatory | Total number of client SYN packets processed by the RURL filter. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.21 | ScalarrurlInfoStatClientReTXSYNsSeen | read-only | mandatory | Total number of client retransmitted SYN packets processed by the RURL filter. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.22 | ScalarrurlInfoStatClientSYNACKsSent | read-only | mandatory | Total number of switch-to-client SYN/ACK packets processed by the RURL filter. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.23 | ScalarrurlInfoStatClientACKsIn | read-only | mandatory | Total number of client ACK packets processed by the RURL filter. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.24 | ScalarrurlInfoStatClientDataIn | read-only | mandatory | Total number of client PSH packets processed by the RURL filter. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.25 | ScalarrurlInfoStatClientDataRetx | read-only | mandatory | Total number of client data retransmit packets processed by the RURL filter. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.26 | ScalarrurlInfoStatServerSYNsSent | read-only | mandatory | Total number of SYN packets sent to the server by the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.27 | ScalarrurlInfoStatServerSYNACKsIn | read-only | mandatory | Total number of swtich-to-server SYN/ACK packets processed by the RURL filter. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.28 | ScalarrurlInfoStatServerACKsSent | read-only | mandatory | Total number of ACK packets sent to the server by the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.29 | ScalarrurlInfoStatServerACKsIn | read-only | mandatory | Total number of server-to-switch ACK packets processed by the RURL filters. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.30 | ScalarrurlInfoStatServerSYNsRetx | read-only | mandatory | Total number of retransmitted SYN packets sent to the server by the switch that resulted in an error. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.31 | ScalarrurlInfoStatServerSYNsRetxErrors | read-only | mandatory | Total number of ACK packets sent to the server by the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.2.32 | ScalarrurlInfoStatL7SessionReuse | read-only | mandatory | Total number of SYN requests that matched a session lookup due to an accidental reuse of a session table entry. This is typically a result of port wrap/reuse o… |
| 1.3.6.1.4.1.1872.2.1.8.18.2.33 | ScalarrurlInfoStatConnSpliced | read-only | mandatory | Total number of connections successfully spliced by the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.3 | NoderurlMaintStats | |||
| 1.3.6.1.4.1.1872.2.1.8.18.3.1 | ScalarrurlMaintStatOrgServerHits | read-only | mandatory | Total number of session setups to the end server. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.2 | ScalarrurlMaintStatHTTPRedirs | read-only | mandatory | Total number of HTTP redirect responses to the client. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.3 | ScalarrurlMaintStatServerReqs | read-only | mandatory | Total number of request packets sent from the switch to the iSD. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.4 | ScalarrurlMaintStatServerAcks | read-only | mandatory | Total number of response packets sent from the iSD to the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.5 | ScalarrurlMaintStatSessCnt | read-only | mandatory | Total number of session connections to the iSD made by the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.6 | ScalarrurlMaintStatLastFrameCnt | read-only | mandatory | Total number of 'last frame' packets sent from the iSD to the switch. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.7 | ScalarrurlMaintStatConnectRxmit | read-only | mandatory | Total number of client retransmissions encountered. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.8 | ScalarrurlMaintStatResetRxmit | read-only | mandatory | Total number of client resets due to excessive retransmissions. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.9 | ScalarrurlMaintStatCurRdirIPEntries | read-only | mandatory | Current IP redirection table entries. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.10 | ScalarrurlMaintStatHighRdirIPEntries | read-only | mandatory | Highest IP redirection table entries. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.11 | ScalarrurlMaintStatCurRdirPORTEntries | read-only | mandatory | Current PORT redirection table entries. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.12 | ScalarrurlMaintStatHighRdirPORTEntries | read-only | mandatory | Highest PORT redirection table entries. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.13 | ScalarrurlMaintStatCurRdirIPPORTEntries | read-only | mandatory | Current IP/PORT redirection table entries. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.14 | ScalarrurlMaintStatHighRdirIPPORTEntries | read-only | mandatory | Highest IP/PORT redirection table entries. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.15 | ScalarrurlMaintStatCurRSEQBufEntries | read-only | mandatory | Current RURL sequence table entries. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.16 | ScalarrurlMaintStatHighRSEQBufEntries | read-only | mandatory | Highest RURL sequence table entries. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.17 | ScalarrurlMaintStatCurRBUFBufEntries | read-only | mandatory | Current RURL frame buffer entries. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.18 | ScalarrurlMaintStatHighRBUFBufEntries | read-only | mandatory | Highest RURL frame buffer entries. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.19 | ScalarrurlMaintStatRSEQBufAllocs | read-only | mandatory | Total number of successful RURL sequence buffer Allocs. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.20 | ScalarrurlMaintStatRSEQBufFrees | read-only | mandatory | Total number of successful RURL sequence buffer Frees. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.21 | ScalarrurlMaintStatRSEQFailBufAllocs | read-only | mandatory | Total number of failed RURL sequence buffer Allocs. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.22 | ScalarrurlMaintStatRSEQFailBufFrees | read-only | mandatory | Total number of failed RURL sequence buffer Frees. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.23 | ScalarrurlMaintStatRBUFBufAllocs | read-only | mandatory | Total number of successful RURL frame buffer Allocs. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.24 | ScalarrurlMaintStatRBUFBufFrees | read-only | mandatory | Total number of successful RURL frame buffer Frees. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.25 | ScalarrurlMaintStatRBUFFailBufAllocs | read-only | mandatory | Total number of failed RURL frame buffer Allocs. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.26 | ScalarrurlMaintStatRBUFFailBufFrees | read-only | mandatory | Total number of failed RURL frame buffer Frees. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.27 | ScalarrurlMaintStatRBUFRetransmit | read-only | mandatory | Total number of retransmissions of an existing RURL frame buffer. |
| 1.3.6.1.4.1.1872.2.1.8.18.3.28 | ScalarrurlMaintStatRBUFChanged | read-only | mandatory | Total number of retransmissions of an existing RURL frame buffer that has changed in length. |
| 1.3.6.1.4.1.1872.2.1.8.19 | NodertspStats | |||
| 1.3.6.1.4.1.1872.2.1.8.19.1 | ScalarrtspStatControlConns | read-only | mandatory | Total number of active RTSP control connections. |
| 1.3.6.1.4.1.1872.2.1.8.19.2 | ScalarrtspStatUDPStreams | read-only | mandatory | Total number of active UDP streams. |
| 1.3.6.1.4.1.1872.2.1.8.19.3 | ScalarrtspStatRedirects | read-only | mandatory | Total number of switch redirects. |
| 1.3.6.1.4.1.1872.2.1.8.19.4 | ScalarrtspStatConnDenied | read-only | mandatory | Total connections denied due to RTSP connection limit. |
| 1.3.6.1.4.1.1872.2.1.8.19.5 | ScalarrtspStatAllocFails | read-only | mandatory | Total cases of heap memory allocation failures. |
| 1.3.6.1.4.1.1872.2.1.8.23 | NodetcpLimitStats | |||
| 1.3.6.1.4.1.1872.2.1.8.23.1 | ScalartcpLimitStatHoldDowns | read-only | mandatory | Total number of client hold downs triggered. |
| 1.3.6.1.4.1.1872.2.1.8.23.2 | ScalartcpLimitStatClientEntries | read-only | mandatory | Current number of TCP rate limiting per-client state entries. |
| 1.3.6.1.4.1.1872.2.1.8.24 | NodenasaStats | |||
| 1.3.6.1.4.1.1872.2.1.8.24.1 | TablenasaStatSpTable | not-accessible | mandatory | The table of NASA statistics at SP. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1 | RownasaStatSpEntry | not-accessible | mandatory | A row in the NASA base port statistcs table. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.1 | ColumnnasaStatSpPortIndex | read-only | mandatory | The port number for which the statistics apply. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.2 | ColumnnasaStatSpCtlTunnelIn | read-only | mandatory | The number of packet in for control tunnel on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.3 | ColumnnasaStatSpCtlTunnelInvalidPkt | read-only | mandatory | The number of invalid packet in for control tunnel on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.4 | ColumnnasaStatSpReqSessCnt | read-only | mandatory | The number of session request message in for control tunnel on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.5 | ColumnnasaStatSpSessAddCnt | read-only | mandatory | The number of session add mesage for control tunnel on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.6 | ColumnnasaStatSpSessDelCnt | read-only | mandatory | The number of session delete message for control tunnel on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.7 | ColumnnasaStatSpSessUpdCnt | read-only | mandatory | The number of session update message for control tunnel on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.8 | ColumnnasaStatSpSessRdCnt | read-only | mandatory | The number of session read message for control tunnel on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.9 | ColumnnasaStatSpSessCharCnt | read-only | mandatory | The number of session characteristics message for control tunnel on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.10 | ColumnnasaStatSpReqSessNoIsd | read-only | mandatory | The number of session request message no isd for control tunnel on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.11 | ColumnnasaStatSpCtlTunnelToMp | read-only | mandatory | The number of packet sent to MP for control tunnel on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.12 | ColumnnasaStatSpBcastTunnelCnt | read-only | mandatory | The number of packet in for broadcast tunnel on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.13 | ColumnnasaStatSpBcastTunnelToMp | read-only | mandatory | The number of packet sent to MP for broadcast tunnel on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.14 | ColumnnasaStatSpBcastTunnelToIsd | read-only | mandatory | The number of packet sent to ISD for broadcast tunnel on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.15 | ColumnnasaStatSpRurlTunnelCnt | read-only | mandatory | The number of RURL tunnel count on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.16 | ColumnnasaStatSpIpDatagramCnt | read-only | mandatory | The number of IP datagram tunnel count on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.17 | ColumnnasaStatSpCliRedirectCnt | read-only | mandatory | The number of client redirect tunnel count on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.18 | ColumnnasaStatSpInvalidVersion | read-only | mandatory | The number of invalid NA/SA version packet in on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.19 | ColumnnasaStatSpAckTx | read-only | mandatory | The number of ack packet sent at link level on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.20 | ColumnnasaStatSpAckRx | read-only | mandatory | The number of ack packet received at link level on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.21 | ColumnnasaStatSpAckAlloc | read-only | mandatory | The number of ack packet allocated at link level on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.22 | ColumnnasaStatSpAckFree | read-only | mandatory | The number of ack packet freed at link level on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.23 | ColumnnasaStatSpAllocAckFail | read-only | mandatory | The number of allocated ack packet failed at link level on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.24 | ColumnnasaStatSpAllocFrmFail | read-only | mandatory | The number of allocated data packet failed at link level on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.25 | ColumnnasaStatSpRexmitFail | read-only | mandatory | The number of re-transmit failed at link level on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.26 | ColumnnasaStatSpInvalidIsd | read-only | mandatory | The number of packet form unknown ISD at link level on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.1.1.27 | ColumnnasaStatSpInvalidPkts | read-only | mandatory | The number of invalid packet at link level on the port. |
| 1.3.6.1.4.1.1872.2.1.8.24.2 | NodenasaMpStats | |||
| 1.3.6.1.4.1.1872.2.1.8.24.2.1 | ScalarnasaStatMpTotalRx | read-only | mandatory | The number of messages received on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.24.2.2 | ScalarnasaStatMpTotalTx | read-only | mandatory | The number of messages transmitted on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.24.2.3 | ScalarnasaStatMpBadCksum | read-only | mandatory | The number of messages received with bad checksum on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.24.2.4 | ScalarnasaStatMpInvalidRx | read-only | mandatory | The number of invalid messages received on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.24.2.5 | ScalarnasaStatMpPingRequests | read-only | mandatory | The number of broadcast pings received on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.24.2.6 | ScalarnasaStatMpPingResponses | read-only | mandatory | The number broadcast ping responses transmitted on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.24.2.7 | ScalarnasaStatMpRegRequests | read-only | mandatory | The number registration requests received on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.24.2.8 | ScalarnasaStatMpCapResponses | read-only | mandatory | The number of capability responses transmitted on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.24.2.9 | ScalarnasaStatMpRegConfirmations | read-only | mandatory | The number of registration confirmations received on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.24.2.10 | ScalarnasaStatMpUnregRequests | read-only | mandatory | The number of unregistration requests received on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.24.2.11 | ScalarnasaStatMpHealthRequests | read-only | mandatory | The number of heartbeat requests transmitted on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.24.2.12 | ScalarnasaStatMpHealthResponses | read-only | mandatory | The number of heartbeat responses received on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.24.2.13 | ScalarnasaStatMpCmdRequests | read-only | mandatory | The number NASA CLI cmd requests received on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.24.2.14 | ScalarnasaStatMpCmdResponses | read-only | mandatory | The number NASA CLI cmd responses received on MP side. |
| 1.3.6.1.4.1.1872.2.1.8.25 | NodednsSlbStats | |||
| 1.3.6.1.4.1.1872.2.1.8.25.1 | ScalardnsSlbStatTCPQueries | read-only | mandatory | Total number of TCP DNS queries. |
| 1.3.6.1.4.1.1872.2.1.8.25.2 | ScalardnsSlbStatUDPQueries | read-only | mandatory | Total number of UDP DNS queries. |
| 1.3.6.1.4.1.1872.2.1.8.25.3 | ScalardnsSlbStatInvalidQueries | read-only | mandatory | Total number of invalid DNS queries. |
| 1.3.6.1.4.1.1872.2.1.8.25.4 | ScalardnsSlbStatMultipleQueries | read-only | mandatory | Total number of multiple DNS queries. |
| 1.3.6.1.4.1.1872.2.1.8.25.5 | ScalardnsSlbStatDnameParseErrors | read-only | mandatory | Total number of domain name parse errors. |
| 1.3.6.1.4.1.1872.2.1.8.25.6 | ScalardnsSlbStatFailedMatches | read-only | mandatory | Total number of failed real server name matches. |
| 1.3.6.1.4.1.1872.2.1.8.25.7 | ScalardnsSlbStatInternalErrors | read-only | mandatory | Total number of DNS parsing internal errors. |
| 1.3.6.1.4.1.1872.2.1.9.2 | Nodeslb-info | |||
| 1.3.6.1.4.1.1872.2.1.9.2.1 | TableslbFailOverInfoTable | not-accessible | mandatory | The table of switch fail-over run-time status. |
| 1.3.6.1.4.1.1872.2.1.9.2.1.1 | RowslbFailOverInfoEntry | not-accessible | mandatory | A row in the switch fail-over information table. |
| 1.3.6.1.4.1.1872.2.1.9.2.1.1.1 | ColumnslbFailOverInfoIndex | read-only | mandatory | The index of switch fail-over information table. |
| 1.3.6.1.4.1.1872.2.1.9.2.1.1.2 | ColumnslbFailOverInfoPrimaryIp | read-only | mandatory | IP address of the primary switch. |
| 1.3.6.1.4.1.1872.2.1.9.2.1.1.3 | ColumnslbFailOverInfoPrimaryStatus | read-only | mandatory | The current operational status of the primary switch. |
| 1.3.6.1.4.1.1872.2.1.9.2.1.1.4 | ColumnslbFailOverInfoPrimaryState | read-only | mandatory | The current operational state of the primary switch. |
| 1.3.6.1.4.1.1872.2.1.9.2.1.1.5 | ColumnslbFailOverInfoSecondaryIp | read-only | mandatory | IP address of the secondary switch. |
| 1.3.6.1.4.1.1872.2.1.9.2.1.1.6 | ColumnslbFailOverInfoSecondaryStatus | read-only | mandatory | The current operational status of the secondary switch. |
| 1.3.6.1.4.1.1872.2.1.9.2.1.1.7 | ColumnslbFailOverInfoSecondaryState | read-only | mandatory | The current operational state of the secondary switch. |
| 1.3.6.1.4.1.1872.2.1.9.2.2 | TableslbRealServerInfoTable | not-accessible | mandatory | The table of real server run-time information. |
| 1.3.6.1.4.1.1872.2.1.9.2.2.1 | RowslbRealServerInfoEntry | not-accessible | mandatory | A row in the real server information table. |
| 1.3.6.1.4.1.1872.2.1.9.2.2.1.1 | ColumnslbRealServerInfoIndex | read-only | mandatory | The real server index |
| 1.3.6.1.4.1.1872.2.1.9.2.2.1.2 | ColumnslbRealServerInfoIpAddr | read-only | mandatory | IP address of the real server. |
| 1.3.6.1.4.1.1872.2.1.9.2.2.1.3 | ColumnslbRealServerMacAddr | read-only | mandatory | The MAC address of the real server. |
| 1.3.6.1.4.1.1872.2.1.9.2.2.1.4 | ColumnslbRealServerInfoSwitchPort | read-only | mandatory | The switch port that the real server is connected to. |
| 1.3.6.1.4.1.1872.2.1.9.2.2.1.5 | ColumnslbRealServerInfoHealthLayer | read-only | mandatory | The OSI layer at whitch real server functionality is verified. |
| 1.3.6.1.4.1.1872.2.1.9.2.2.1.6 | ColumnslbRealServerInfoOverflow | read-only | mandatory | The overflow state of the real server. |
| 1.3.6.1.4.1.1872.2.1.9.2.2.1.7 | ColumnslbRealServerInfoState | read-only | mandatory | The state of the real server. |
| 1.3.6.1.4.1.1872.2.1.9.2.3 | TablenasaIsdInfoTable | not-accessible | mandatory | The table of NASA ISD run-time information. |
| 1.3.6.1.4.1.1872.2.1.9.2.3.1 | RownasaIsdInfoEntry | not-accessible | mandatory | A row in the real server information table. |
| 1.3.6.1.4.1.1872.2.1.9.2.3.1.1 | ColumnnasaIsdInfoIndex | read-only | mandatory | The ISD index |
| 1.3.6.1.4.1.1872.2.1.9.2.3.1.2 | ColumnnasaIsdInfoIpAddr | read-only | mandatory | IP address of the ISD. |
| 1.3.6.1.4.1.1872.2.1.9.2.3.1.3 | ColumnnasaIsdMacAddr | read-only | mandatory | The MAC address of the ISD. |
| 1.3.6.1.4.1.1872.2.1.9.2.3.1.4 | ColumnnasaIsdInfoSwitchPort | read-only | mandatory | The switch port that the ISD is connected to. |
| 1.3.6.1.4.1.1872.2.1.9.2.3.1.5 | ColumnnasaIsdInfoGdi | read-only | mandatory | VLAN ID of the ISD. |
| 1.3.6.1.4.1.1872.2.1.9.2.3.1.6 | ColumnnasaIsdInfoState | read-only | mandatory | The current state of the ISD. |
| 1.3.6.1.4.1.1872.2.1.9.2.3.1.7 | ColumnnasaIsdInfoStateChange | read-only | mandatory | The number of ISD state transitions from up to down. |
| 1.3.6.1.4.1.1872.2.1.10 | Nodefiltering | |||
| 1.3.6.1.4.1.1872.2.1.10.1 | ScalarfltCfgTableMaxSize | read-only | mandatory | The maximum number of filtering table entries. |
| 1.3.6.1.4.1.1872.2.1.10.2 | TablefltCurCfgTable | not-accessible | mandatory | The filtering table in the current configuration block. |
| 1.3.6.1.4.1.1872.2.1.10.2.1 | RowfltCurCfgTableEntry | not-accessible | mandatory | A row in the filtering table. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.1 | ColumnfltCurCfgIndx | read-only | mandatory | The filteriang table index. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.2 | ColumnfltCurCfgSrcIp | read-only | mandatory | The source IP address to be filtered. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.3 | ColumnfltCurCfgSrcIpMask | read-only | mandatory | The source IP sub-net mask for filtering. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.4 | ColumnfltCurCfgDstIp | read-only | mandatory | The destination IP address to be filtered. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.5 | ColumnfltCurCfgDstIpMask | read-only | mandatory | The destination IP sub-net mask for filtering. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.6 | ColumnfltCurCfgProtocol | read-only | mandatory | The protocol to be filtered. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.7 | ColumnfltCurCfgRangeHighSrcPort | read-only | mandatory | The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.8 | ColumnfltCurCfgRangeLowSrcPort | read-only | mandatory | The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.9 | ColumnfltCurCfgRangeLowDstPort | read-only | mandatory | The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.10 | ColumnfltCurCfgRangeHighDstPort | read-only | mandatory | The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.11 | ColumnfltCurCfgAction | read-only | mandatory | The action for the filtering rule. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.12 | ColumnfltCurCfgRedirPort | read-only | mandatory | The real server port number used for redirection. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.13 | ColumnfltCurCfgRedirGroup | read-only | mandatory | The real server group to be redirected to. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.14 | ColumnfltCurCfgLog | read-only | mandatory | Enable or disable logging. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.15 | ColumnfltCurCfgState | read-only | mandatory | The state of this filtering rule. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.16 | ColumnfltCurCfgNat | read-only | mandatory | The selection of destination or source for network address translation. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.17 | ColumnfltCurCfgCache | read-only | mandatory | Enable or disable caching sessions that match filter. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.18 | ColumnfltCurCfgInvert | read-only | mandatory | Turn the invert logic on or off for the filter entry. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.19 | ColumnfltCurCfgClientProxy | read-only | mandatory | Enable or disable client proxy. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.20 | ColumnfltCurCfgTcpAck | read-only | mandatory | Enable or disable filtering on matching TCP ACK and RST flag. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.21 | ColumnfltCurCfgUrlRedir | read-only | mandatory | Enable or disable URL redirection. The URL expressions are defined in slbCurCfgUrlTable. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.22 | ColumnfltCurCfgSrcMac | read-only | mandatory | The source MAC address to be filtered. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.23 | ColumnfltCurCfgDstMac | read-only | mandatory | The Destination MAC address to be filtered. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.24 | ColumnfltCurCfgFtpNatActive | read-only | mandatory | Enable or disable FTP NAT for active ftp only. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.25 | ColumnfltCurCfgAclTcpUrg | read-only | mandatory | Enable or disable TCP URG packet. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.26 | ColumnfltCurCfgAclTcpAck | read-only | mandatory | Enable or disable TCP ACK packet. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.27 | ColumnfltCurCfgAclTcpPsh | read-only | mandatory | Enable or disable TCP PSH packet. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.28 | ColumnfltCurCfgAclTcpRst | read-only | mandatory | Enable or disable TCP RST packet. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.29 | ColumnfltCurCfgAclTcpSyn | read-only | mandatory | Enable or disable TCP SYN packet. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.30 | ColumnfltCurCfgAclTcpFin | read-only | mandatory | Enable or disable TCP FIN packet. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.31 | ColumnfltCurCfgAclIcmp | read-only | mandatory | ICMP type to be filtered. A ICMP type of 255 indicates 'any' |
| 1.3.6.1.4.1.1872.2.1.10.2.1.32 | ColumnfltCurCfgAclIpOption | read-only | mandatory | Enable or disable IP option matching. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.33 | ColumnfltCurCfgBwmContract | read-only | mandatory | Filt default BW contract number. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.34 | ColumnfltCurCfgAclIpTos | read-only | mandatory | The IP TOS value to be filtered. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.35 | ColumnfltCurCfgAclIpTosMask | read-only | mandatory | The IP TOS mask for filtering. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.36 | ColumnfltCurCfgAclIpTosNew | read-only | mandatory | The new IP TOS value to over-write when filtering fired. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.37 | ColumnfltCurCfgFwlb | read-only | mandatory | Enable or disable filtering on firewall redirect hash method. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.38 | ColumnfltCurCfgNatTimeout | read-only | mandatory | The NAT session timeout. The timeout value should be an even number between (4..30) |
| 1.3.6.1.4.1.1872.2.1.10.2.1.39 | ColumnfltCurCfgRurl | read-only | mandatory | Enable or disable RURL parsing. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.40 | ColumnfltCurCfgLinklb | read-only | mandatory | Enable or disable WAN link load balancing. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.41 | ColumnfltCurCfgWapRadiusSnoop | read-only | mandatory | Enable or disable WAP RADIUS snooping. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.42 | ColumnfltCurCfgSrcIpMac | read-only | mandatory | Set a flag indicating whether filtering should be based on the source IP address or the source MAC address field. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.43 | ColumnfltCurCfgDstIpMac | read-only | mandatory | Set a flag indicating whether filtering should be based on the destination IP address or the destination MAC address field. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.44 | ColumnfltCurCfgIdslbHash | read-only | mandatory | Set hash parameter for intrusion detection server load balancing. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.45 | ColumnfltCurCfgVlan | read-only | mandatory | Set the VLAN assoicated with the filter. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.46 | ColumnfltCurCfgName | read-only | mandatory | The name of the filter. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.47 | ColumnfltCurCfgTcpRateLimit | read-only | mandatory | Enable or disable TCP connection rate limiting. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.48 | ColumnfltCurCfgTcpRateMaxConn | read-only | mandatory | Set maximum connections (number of connections in units of 10) for TCP connection rate limiting. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.49 | ColumnfltCurCfgHash | read-only | mandatory | Set hash parameter for the filter. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.50 | ColumnfltCurCfgNasa | read-only | mandatory | Enable or disable NASA redirect to ISD. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.51 | ColumnfltCurCfgLayer7DenyState | read-only | mandatory | Enable or disable layer 7 deny filtering. |
| 1.3.6.1.4.1.1872.2.1.10.2.1.52 | ColumnfltCurCfgLayer7DenyUrlBmap | read-only | mandatory | The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxx… |
| 1.3.6.1.4.1.1872.2.1.10.3 | TablefltNewCfgTable | not-accessible | mandatory | The filtering table in the new configuration block. |
| 1.3.6.1.4.1.1872.2.1.10.3.1 | RowfltNewCfgTableEntry | not-accessible | mandatory | A row in the filtering table. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.1 | ColumnfltNewCfgIndx | read-only | mandatory | The filtering table index. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.2 | ColumnfltNewCfgSrcIp | read-write | mandatory | The source IP address to be filtered. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.3 | ColumnfltNewCfgSrcIpMask | read-write | mandatory | The source IP sub-net mask for filtering. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.4 | ColumnfltNewCfgDstIp | read-write | mandatory | The destination IP address to be filtered. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.5 | ColumnfltNewCfgDstIpMask | read-write | mandatory | The destination IP sub-net mask for filtering. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.6 | ColumnfltNewCfgProtocol | read-write | mandatory | The protocol to be filtered. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.7 | ColumnfltNewCfgRangeHighSrcPort | read-write | mandatory | The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.8 | ColumnfltNewCfgRangeLowSrcPort | read-write | mandatory | The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.9 | ColumnfltNewCfgRangeLowDstPort | read-write | mandatory | The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.10 | ColumnfltNewCfgRangeHighDstPort | read-write | mandatory | The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.11 | ColumnfltNewCfgAction | read-write | mandatory | The action for the filtering rule. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.12 | ColumnfltNewCfgRedirPort | read-write | mandatory | The real server port number used for redirection. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.13 | ColumnfltNewCfgRedirGroup | read-write | mandatory | The real server group to be redirected to. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.14 | ColumnfltNewCfgLog | read-write | mandatory | Enable or disable logging. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.15 | ColumnfltNewCfgState | read-write | mandatory | The state of this filtering rule. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.16 | ColumnfltNewCfgDelete | read-write | mandatory | When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe… |
| 1.3.6.1.4.1.1872.2.1.10.3.1.17 | ColumnfltNewCfgNat | read-write | mandatory | The selection of destination or source for network address translation. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.18 | ColumnfltNewCfgCache | read-write | mandatory | Enable or disable caching sessions that match filter. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.19 | ColumnfltNewCfgInvert | read-write | mandatory | Turn the invert logic on or off for the filter entry. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.20 | ColumnfltNewCfgClientProxy | read-write | mandatory | Enable or disable client proxy. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.21 | ColumnfltNewCfgTcpAck | read-write | mandatory | Enable or disable filtering on matching TCP ACK and RST flag. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.22 | ColumnfltNewCfgUrlRedir | read-write | mandatory | Enable or disable URL redirection. The URL expressions are defined in slbNewCfgUrlTable. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.23 | ColumnfltNewCfgSrcMac | read-write | mandatory | The source MAC address to be filtered. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.24 | ColumnfltNewCfgDstMac | read-write | mandatory | The Destination MAC address to be filtered. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.25 | ColumnfltNewCfgFtpNatActive | read-write | mandatory | Enable or disable FTP NAT for active ftp. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.26 | ColumnfltNewCfgAclTcpUrg | read-write | mandatory | Enable or disable TCP URG packet. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.27 | ColumnfltNewCfgAclTcpAck | read-write | mandatory | Enable or disable TCP ACK packet. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.28 | ColumnfltNewCfgAclTcpPsh | read-write | mandatory | Enable or disable TCP PSH packet. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.29 | ColumnfltNewCfgAclTcpRst | read-write | mandatory | Enable or disable TCP RST packet. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.30 | ColumnfltNewCfgAclTcpSyn | read-write | mandatory | Enable or disable TCP SYN packet. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.31 | ColumnfltNewCfgAclTcpFin | read-write | mandatory | Enable or disable TCP FIN packet. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.32 | ColumnfltNewCfgAclIcmp | read-write | mandatory | ICMP type to be filtered. A ICMP type of 255 indicates 'any' |
| 1.3.6.1.4.1.1872.2.1.10.3.1.33 | ColumnfltNewCfgAclIpOption | read-write | mandatory | Enable or disable IP option matching. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.34 | ColumnfltNewCfgBwmContract | read-write | mandatory | Filt default BW contract number. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.35 | ColumnfltNewCfgAclIpTos | read-write | mandatory | The IP TOS value to be filtered. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.36 | ColumnfltNewCfgAclIpTosMask | read-write | mandatory | The IP TOS mask for filtering. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.37 | ColumnfltNewCfgAclIpTosNew | read-write | mandatory | The new IP TOS value to over-write when filtering fired. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.38 | ColumnfltNewCfgFwlb | read-write | mandatory | Enable or disable filtering on firewall redirect hash method. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.39 | ColumnfltNewCfgNatTimeout | read-write | mandatory | The NAT session timeout. The timeout value should be an even number between (4..30) |
| 1.3.6.1.4.1.1872.2.1.10.3.1.40 | ColumnfltNewCfgRurl | read-write | mandatory | Enable or disable RURL parsing. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.41 | ColumnfltNewCfgLinklb | read-write | mandatory | Enable or disable WAN link load balancing. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.42 | ColumnfltNewCfgWapRadiusSnoop | read-write | mandatory | Enable or disable WAP RADIUS snooping. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.43 | ColumnfltNewCfgSrcIpMac | read-write | mandatory | Set a flag indicating whether filtering should be based on the source IP address or the source MAC address field. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.44 | ColumnfltNewCfgDstIpMac | read-write | mandatory | Set a flag indicating whether filtering should be based on the destination IP address or the destination MAC address field. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.45 | ColumnfltNewCfgIdslbHash | read-write | mandatory | Set hash parameter for intrusion detection server load balancing. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.46 | ColumnfltNewCfgVlan | read-write | mandatory | Set the VLAN assoicated with the filter. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.47 | ColumnfltNewCfgName | read-write | mandatory | The name of the filter. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.48 | ColumnfltNewCfgTcpRateLimit | read-write | mandatory | Enable or disable TCP connection rate limiting. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.49 | ColumnfltNewCfgTcpRateMaxConn | read-write | mandatory | Set maximum connections (number of connections in units of 10) for TCP connection rate limiting. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.50 | ColumnfltNewCfgHash | read-write | mandatory | Set hash parameter for the filter. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.51 | ColumnfltNewCfgNasa | read-write | mandatory | Enable or disable NASA redirect to ISD. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.52 | ColumnfltNewCfgLayer7DenyState | read-write | mandatory | Enable or disable layer 7 deny filtering. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.53 | ColumnfltNewCfgLayer7DenyUrlBmap | read-only | mandatory | The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxx… |
| 1.3.6.1.4.1.1872.2.1.10.3.1.54 | ColumnfltNewCfgLayer7DenyAddUrl | read-write | mandatory | The URL Path (slbCurCfgUrlLbPathIndex) to be added to the Layer 7 deny filter. A zero is returned when read. |
| 1.3.6.1.4.1.1872.2.1.10.3.1.55 | ColumnfltNewCfgLayer7DenyRemUrl | read-write | mandatory | The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the Layer 7 deny filter. A zero is returned when read. |
| 1.3.6.1.4.1.1872.2.1.10.4 | TablefltCurCfgPortTable | not-accessible | mandatory | The filtering port table in the current configuration block. |
| 1.3.6.1.4.1.1872.2.1.10.4.1 | RowfltCurCfgPortTableEntry | not-accessible | mandatory | A row in the filtering port table. |
| 1.3.6.1.4.1.1872.2.1.10.4.1.1 | ColumnfltCurCfgPortIndx | read-only | mandatory | The port index. |
| 1.3.6.1.4.1.1872.2.1.10.4.1.2 | ColumnfltCurCfgPortState | read-only | mandatory | Enable or disable filtering. |
| 1.3.6.1.4.1.1872.2.1.10.4.1.3 | ColumnfltCurCfgPortFiltBmap | read-only | mandatory | The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... … |
| 1.3.6.1.4.1.1872.2.1.10.5 | TablefltNewCfgPortTable | not-accessible | mandatory | The filtering port table in the new configuration block. |
| 1.3.6.1.4.1.1872.2.1.10.5.1 | RowfltNewCfgPortTableEntry | not-accessible | mandatory | A row in the filtering port table. |
| 1.3.6.1.4.1.1872.2.1.10.5.1.1 | ColumnfltNewCfgPortIndx | read-only | mandatory | The port index. |
| 1.3.6.1.4.1.1872.2.1.10.5.1.2 | ColumnfltNewCfgPortState | read-write | mandatory | Enable or disable filtering. |
| 1.3.6.1.4.1.1872.2.1.10.5.1.3 | ColumnfltNewCfgPortFiltBmap | read-write | mandatory | The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... … |
| 1.3.6.1.4.1.1872.2.1.10.5.1.4 | ColumnfltNewCfgPortAddFiltRule | read-write | mandatory | This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to b… |
| 1.3.6.1.4.1.1872.2.1.10.5.1.5 | ColumnfltNewCfgPortRemFiltRule | read-write | mandatory | This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule… |
| 1.3.6.1.4.1.1872.2.1.10.6 | TablefltCurCfgUrlBwmTable | not-accessible | mandatory | The table of URL based BWM for filtering. |
| 1.3.6.1.4.1.1872.2.1.10.6.1 | RowfltCurCfgUrlBwmEntry | not-accessible | mandatory | A row in the URL based BWM filtering table. |
| 1.3.6.1.4.1.1872.2.1.10.6.1.1 | ColumnfltCurCfgUrlBwmFltIndex | read-only | mandatory | The number of the filter. |
| 1.3.6.1.4.1.1872.2.1.10.6.1.2 | ColumnfltCurCfgUrlBwmUrlId | read-only | mandatory | The URL Path Identifier. |
| 1.3.6.1.4.1.1872.2.1.10.6.1.3 | ColumnfltCurCfgUrlBwmContract | read-only | mandatory | The BW contract. |
| 1.3.6.1.4.1.1872.2.1.10.7 | TablefltNewCfgUrlBwmTable | not-accessible | mandatory | The table of URL based BWM for filtering. |
| 1.3.6.1.4.1.1872.2.1.10.7.1 | RowfltNewCfgUrlBwmEntry | not-accessible | mandatory | A row in the URL based BWM filtering table. |
| 1.3.6.1.4.1.1872.2.1.10.7.1.1 | ColumnfltNewCfgUrlBwmFltIndex | read-only | mandatory | The number of the filter. |
| 1.3.6.1.4.1.1872.2.1.10.7.1.2 | ColumnfltNewCfgUrlBwmUrlId | read-only | mandatory | The URL Path Identifier. |
| 1.3.6.1.4.1.1872.2.1.10.7.1.3 | ColumnfltNewCfgUrlBwmContract | read-write | mandatory | The BW traffic contract. |
| 1.3.6.1.4.1.1872.2.1.10.7.1.4 | ColumnfltNewCfgUrlBwmDelete | read-write | mandatory | When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe… |
| 1.3.6.1.4.1.1872.2.1.10.8 | ScalarfltUrlBwmTableMaxSize | read-only | mandatory | The maximum number of URL based BWM entries. |
| 1.3.6.1.4.1.1872.2.1.11 | NodeglobalSLB | |||
| 1.3.6.1.4.1.1872.2.1.11.1 | NodegslbGeneral | |||
| 1.3.6.1.4.1.1872.2.1.11.1.1 | ScalargslbCurCfgGenState | read-only | mandatory | Turn on or off Distributed Server Load Balance. |
| 1.3.6.1.4.1.1872.2.1.11.1.2 | ScalargslbNewCfgGenState | read-write | mandatory | Turn on or off Distributed Server Load Balance. |
| 1.3.6.1.4.1.1872.2.1.11.1.3 | ScalargslbCurCfgGenDnsHandoff | read-only | mandatory | Enable/Disable DNS handoffs in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.1.4 | ScalargslbNewCfgGenDnsHandoff | read-write | mandatory | Enable/Disable DNS handoffs in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.1.5 | ScalargslbCurCfgGenDnsTTL | read-only | mandatory | Time to live value in minute of DNS resource records in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.1.6 | ScalargslbNewCfgGenDnsTTL | read-write | mandatory | Time to live value in minute of DNS resource records in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.1.7 | ScalargslbCurCfgGenHttpRedirect | read-only | mandatory | Enable/Disable DNS handoffs in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.1.8 | ScalargslbNewCfgGenHttpRedirect | read-write | mandatory | Enable/Disable DNS handoffs in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.1.9 | ScalargslbCurCfgGenRemSiteUpdateInterval | read-only | mandatory | The time interval in minute for updating remote site status in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.1.10 | ScalargslbNewCfgGenRemSiteUpdateInterval | read-write | mandatory | The time interval in minute for updating remote site status in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.1.11 | ScalargslbCurCfgGenDnsLocalPref | read-only | mandatory | Enable/Disable DNS responses with only local addresses. |
| 1.3.6.1.4.1.1872.2.1.11.1.12 | ScalargslbNewCfgGenDnsLocalPref | read-write | mandatory | Enable/Disable DNS responses with only local addresses. |
| 1.3.6.1.4.1.1872.2.1.11.1.13 | ScalargslbCurCfgGenMinco | read-only | mandatory | Minmum number of site connections in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.1.14 | ScalargslbNewCfgGenMinco | read-write | mandatory | Minmum number of site connections in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.1.15 | ScalargslbCurCfgGenOne | read-only | mandatory | Enable/Disable DNS responses with only one address. |
| 1.3.6.1.4.1.1872.2.1.11.1.16 | ScalargslbNewCfgGenOne | read-write | mandatory | Enable/Disable DNS responses with only one address. |
| 1.3.6.1.4.1.1872.2.1.11.1.17 | ScalargslbCurCfgGenUsern | read-only | mandatory | Enable/Disable HTTP redirect to real server name. |
| 1.3.6.1.4.1.1872.2.1.11.1.18 | ScalargslbNewCfgGenUsern | read-write | mandatory | Enable/Disable HTTP redirect to real server name. |
| 1.3.6.1.4.1.1872.2.1.11.1.19 | ScalargslbCurCfgGenGeo | read-only | mandatory | Enable/Disable geographic awareness. |
| 1.3.6.1.4.1.1872.2.1.11.1.20 | ScalargslbNewCfgGenGeo | read-write | mandatory | Enable/Disable geographic awareness. |
| 1.3.6.1.4.1.1872.2.1.11.1.21 | ScalargslbCurCfgGenAlways | read-only | mandatory | Enable/Disable DNS responses with at least one address. |
| 1.3.6.1.4.1.1872.2.1.11.1.22 | ScalargslbNewCfgGenAlways | read-write | mandatory | Enable/Disable DNS responses with at least one address. |
| 1.3.6.1.4.1.1872.2.1.11.1.23 | ScalargslbCurCfgGenWeight | read-only | mandatory | Sets the local weight. The higher the weight value, the more connections that will be directed to the local site. |
| 1.3.6.1.4.1.1872.2.1.11.1.24 | ScalargslbNewCfgGenWeight | read-write | mandatory | Sets the local weight. The higher the weight value, the more connections that will be directed to the local site. |
| 1.3.6.1.4.1.1872.2.1.11.2 | NodegslbDNS | |||
| 1.3.6.1.4.1.1872.2.1.11.2.1 | ScalardnsCurCfgPrimaryIpAddr | read-only | mandatory | The DNS primary IP address in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.2.2 | ScalardnsNewCfgPrimaryIpAddr | read-write | mandatory | The DNS primary IP address in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.2.3 | ScalardnsCurCfgSecondaryIpAddr | read-only | mandatory | The DNS primary IP address in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.2.4 | ScalardnsNewCfgSecondaryIpAddr | read-write | mandatory | The DNS primary IP address in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.2.5 | ScalardnsCurCfgDomainName | read-only | mandatory | The DNS doamin name in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.2.6 | ScalardnsNewCfgDomainName | read-write | mandatory | The DNS doamin name in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.3 | NodegslbSites | |||
| 1.3.6.1.4.1.1872.2.1.11.3.1 | ScalargslbRemSiteTableMaxSize | read-only | mandatory | The maximum number of GSLB remote sites. |
| 1.3.6.1.4.1.1872.2.1.11.3.2 | TablegslbCurCfgRemSiteTable | not-accessible | mandatory | The GSLB remote sites table in the current configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.3.2.1 | RowgslbCurCfgRemSiteTableEntry | not-accessible | mandatory | A row in the GSLB remote sites table. |
| 1.3.6.1.4.1.1872.2.1.11.3.2.1.1 | ColumngslbCurCfgRemSiteIndx | read-only | mandatory | The GSLB remote sites table index. |
| 1.3.6.1.4.1.1872.2.1.11.3.2.1.2 | ColumngslbCurCfgRemSitePrimaryIp | read-only | mandatory | The primary IP address of the remote site in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.3.2.1.3 | ColumngslbCurCfgRemSiteSecondaryIp | read-only | mandatory | The secondary IP address of the remote site in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.3.2.1.4 | ColumngslbCurCfgRemSiteState | read-only | mandatory | Enable/Disable GSLB for the remote site in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.3.2.1.5 | ColumngslbCurCfgRemSiteUpdate | read-only | mandatory | Enable/Disable GSLB for the remote site status update in the current_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.3.2.1.6 | ColumngslbCurCfgRemSiteName | read-only | mandatory | The name of the GSLB remote site. |
| 1.3.6.1.4.1.1872.2.1.11.3.3 | TablegslbNewCfgRemSiteTable | not-accessible | mandatory | The GSLB remote sites table in the current configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.3.3.1 | RowgslbNewCfgRemSiteTableEntry | not-accessible | mandatory | A row in the GSLB remote sites table. |
| 1.3.6.1.4.1.1872.2.1.11.3.3.1.1 | ColumngslbNewCfgRemSiteIndx | read-only | mandatory | The GSLB remote sites table index. |
| 1.3.6.1.4.1.1872.2.1.11.3.3.1.2 | ColumngslbNewCfgRemSitePrimaryIp | read-write | mandatory | The primary IP address of the remote site in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.3.3.1.3 | ColumngslbNewCfgRemSiteSecondaryIp | read-write | mandatory | The secondary IP address of the remote site in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.3.3.1.4 | ColumngslbNewCfgRemSiteState | read-write | mandatory | Enable/Disable GSLB for the remote site in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.3.3.1.5 | ColumngslbNewCfgRemSiteUpdate | read-write | mandatory | Enable/Disable GSLB for the remote site status update in the new_configuration block. |
| 1.3.6.1.4.1.1872.2.1.11.3.3.1.6 | ColumngslbNewCfgRemSiteDelete | read-write | mandatory | By setting the value to delete(2), the entire row is deleted. |
| 1.3.6.1.4.1.1872.2.1.11.3.3.1.7 | ColumngslbNewCfgRemSiteName | read-write | mandatory | The name of the GSLB remote site. |
| 1.3.6.1.4.1.1872.2.1.11.4 | NodegslbLookup | |||
| 1.3.6.1.4.1.1872.2.1.11.4.1 | ScalargslbCurCfgGenLookups | read-only | mandatory | Enable or disable network preference lookups. |
| 1.3.6.1.4.1.1872.2.1.11.4.2 | ScalargslbNewCfgGenLookups | read-write | mandatory | Enable or disable network preference lookups. |
| 1.3.6.1.4.1.1872.2.1.11.4.3 | ScalargslbCurCfgGenLookupDname | read-only | mandatory | Domain name for internal lookup table |
| 1.3.6.1.4.1.1872.2.1.11.4.4 | ScalargslbNewCfgGenLookupDname | read-write | mandatory | Domain name for internal lookup table |
| 1.3.6.1.4.1.1872.2.1.11.4.5 | NodegslbNetwork | |||
| 1.3.6.1.4.1.1872.2.1.11.4.5.1 | ScalargslbNetworkTableMaxSize | read-only | mandatory | The maximum number of GSLB Internet network preference entries. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.2 | TablegslbCurCfgNetworkTable | not-accessible | mandatory | The table of Internet network preference in the current_config. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.2.1 | RowgslbCurCfgNetworkTableEntry | not-accessible | mandatory | The table about a network preference entry configuration. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.2.1.1 | ColumngslbCurCfgNetworkIndx | read-only | mandatory | The current Internet network preference table index. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.2.1.2 | ColumngslbCurCfgNetworkSourceIp | read-only | mandatory | The Source IP address of the network table. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.2.1.3 | ColumngslbCurCfgNetworkNetMask | read-only | mandatory | The Net mask of the network table. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.2.1.4 | ColumngslbCurCfgNetworkVip1 | read-only | mandatory | The Vip1 of the network table. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.2.1.5 | ColumngslbCurCfgNetworkVip2 | read-only | mandatory | The Vip2 of the network table. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.3 | TablegslbNewCfgNetworkTable | not-accessible | mandatory | The table of Internet network preference in the new_config. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.3.1 | RowgslbNewCfgNetworkTableEntry | not-accessible | mandatory | The table about a network preference entry configuration. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.3.1.1 | ColumngslbNewCfgNetworkIndx | read-only | mandatory | The new Internet network preference table index. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.3.1.2 | ColumngslbNewCfgNetworkSourceIp | read-write | mandatory | The Source IP address of the network table. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.3.1.3 | ColumngslbNewCfgNetworkNetMask | read-write | mandatory | The Net mask of the network table. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.3.1.4 | ColumngslbNewCfgNetworkVip1 | read-write | mandatory | The Vip1 of the network table. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.3.1.5 | ColumngslbNewCfgNetworkVip2 | read-write | mandatory | The Vip2 of the network table. |
| 1.3.6.1.4.1.1872.2.1.11.4.5.3.1.12 | ColumngslbNewCfgNetworkDelete | read-write | mandatory | By setting the value to delete(2), the entire row is deleted. |
| 1.3.6.1.4.1.1872.2.1.11.4.6 | ScalargslbCurCfgGenExternal | read-only | obsolete | Enable or disable external lookups. |
| 1.3.6.1.4.1.1872.2.1.11.4.7 | ScalargslbNewCfgGenExternal | read-write | obsolete | Enable or disable external lookups. |
| 1.3.6.1.4.1.1872.2.1.11.4.8 | ScalargslbCurCfgGenEip | read-only | obsolete | External lookup IP address |
| 1.3.6.1.4.1.1872.2.1.11.4.9 | ScalargslbNewCfgGenEip | read-write | obsolete | External lookup IP address |
| 1.3.6.1.4.1.1872.2.1.11.4.10 | ScalargslbCurCfgGenLookupPort | read-only | obsolete | External lookup UDP port number |
| 1.3.6.1.4.1.1872.2.1.11.4.11 | ScalargslbNewCfgGenLookupPort | read-write | obsolete | External lookup UDP port number |
| 1.3.6.1.4.1.1872.2.1.11.4.12 | ScalargslbCurCfgGenLookupTimeout | read-only | obsolete | External lookup Timeout Interval |
| 1.3.6.1.4.1.1872.2.1.11.4.13 | ScalargslbNewCfgGenLookupTimeout | read-write | obsolete | External lookup Timeout Interval |
| 1.3.6.1.4.1.1872.2.1.12 | NodedynamicSLB | |||
| 1.3.6.1.4.1.1872.2.1.12.1 | TabledynSLBRealServerTable | not-accessible | obsolete | The table of Real Servers. |
| 1.3.6.1.4.1.1872.2.1.12.1.1 | RowdynSLBRealServerEntry | not-accessible | obsolete | A row in the Real Server table. |
| 1.3.6.1.4.1.1872.2.1.12.1.1.1 | ColumndynSLBRealServerIpAddr | read-only | obsolete | IP address of the Real Server. |
| 1.3.6.1.4.1.1872.2.1.12.1.1.2 | ColumndynSLBRealServerPortNum | read-only | obsolete | The switch port that the Real Server is connected to. |
| 1.3.6.1.4.1.1872.2.1.12.1.1.3 | ColumndynSLBRealServerWeight | read-write | obsolete | The Real Server weight. The higher the server weight means the Real Server is allowed to receive more traffic load. |
| 1.3.6.1.4.1.1872.2.1.14.1 | TableoperSlbPortTable | not-accessible | mandatory | The table of ports that the Oper commands apply to. |
| 1.3.6.1.4.1.1872.2.1.14.1.1 | RowoperSlbPortEntry | not-accessible | mandatory | A row in the operSlbPortTable |
| 1.3.6.1.4.1.1872.2.1.14.1.1.1 | ColumnoperSlbPortIndex | read-only | mandatory | The switch port number. |
| 1.3.6.1.4.1.1872.2.1.14.1.1.2 | ColumnoperSlbPortClrSessionTab | read-write | mandatory | This an action object to clear session buinding table for the specified port. ok(1) is returned when read. |
| 1.3.6.1.4.1.1872.2.1.14.4 | NodeslbOper | |||
| 1.3.6.1.4.1.1872.2.1.14.4.1 | TableslbOperRealServerTable | not-accessible | mandatory | The table of real servers. |
| 1.3.6.1.4.1.1872.2.1.14.4.1.1 | RowslbOperRealServerEntry | not-accessible | mandatory | A row in the slbOperRealServerTable |
| 1.3.6.1.4.1.1872.2.1.14.4.1.1.1 | ColumnslbOperRealServerIndex | read-only | mandatory | The index for the real server. |
| 1.3.6.1.4.1.1872.2.1.14.4.1.1.2 | ColumnslbOperRealServerStatus | read-write | mandatory | This an action object which is used to temporarily enable/disable a real server. The real server will be returned to its configured operational mode when the s… |
| 1.3.6.1.4.1.1872.2.1.14.4.2 | ScalarslbOperConfigSync | read-write | mandatory | When set to a value of 'sync(2)' it synchronizes the SLB, filter and VRRP configuration on a peer switch. To take effect, peers must be configured on the switc… |