ANNEX-MIB
189 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15 | Nodexylogics | |||
| 1.3.6.1.4.1.15.1 | Nodeprod | |||
| 1.3.6.1.4.1.15.1.1 | Scalarprodannex | read-only | mandatory | Product name. |
| 1.3.6.1.4.1.15.2 | Nodeannex | |||
| 1.3.6.1.4.1.15.2.1 | Nodehw | |||
| 1.3.6.1.4.1.15.2.1.1 | ScalarhwType | read-only | mandatory | An identifier for the Annex hardware type. |
| 1.3.6.1.4.1.15.2.1.2 | ScalarhwRev | read-only | mandatory | The revision level of the hardware platform. |
| 1.3.6.1.4.1.15.2.1.3 | ScalarromRev | read-only | mandatory | The revision number of the ROM Monitor software. |
| 1.3.6.1.4.1.15.2.1.4 | ScalarserialNumber | read-only | mandatory | The serial number assigned to the unit. |
| 1.3.6.1.4.1.15.2.1.5 | ScalarmemorySize | read-only | mandatory | The amount of memory present in the unit. |
| 1.3.6.1.4.1.15.2.2 | Nodesw | |||
| 1.3.6.1.4.1.15.2.2.1 | ScalarswType | read-only | mandatory | The software version currently running on the Annex. |
| 1.3.6.1.4.1.15.2.2.2 | ScalarswRevMajor | read-only | mandatory | The major software release number. |
| 1.3.6.1.4.1.15.2.2.3 | ScalarswRevMinor | read-only | mandatory | The minor software release number. |
| 1.3.6.1.4.1.15.2.2.4 | ScalarswBuild | read-only | mandatory | The full name of the software build, including the software version, major and minor version numbers and the date and time of the build. |
| 1.3.6.1.4.1.15.2.2.5 | ScalarimageName | read-only | mandatory | The name of the most recently booted image. |
| 1.3.6.1.4.1.15.2.2.6 | ScalarbootHost | read-only | mandatory | The Internet address of the host from which the Annex booted. |
| 1.3.6.1.4.1.15.2.2.7 | ScalardefaultDomain | read-only | mandatory | The default domain name provided by the DNS nameserver. |
| 1.3.6.1.4.1.15.2.2.8 | ScalarcurrentDate | read-only | mandatory | The current date and time provided by the time server. |
| 1.3.6.1.4.1.15.2.2.9 | ScalarusableMemory | read-only | mandatory | The amount of available for data buffers and other structures after the Annex has booted. |
| 1.3.6.1.4.1.15.2.2.10 | ScalarfreeMemory | read-only | mandatory | The amount of currently available memory. |
| 1.3.6.1.4.1.15.2.2.11 | ScalarminFreeMemory | read-only | mandatory | The minimum amount of free memory since booting the Annex. |
| 1.3.6.1.4.1.15.2.2.12 | ScalarcpuUtilization | read-only | mandatory | Percent of CPU time currently being used. |
| 1.3.6.1.4.1.15.2.2.13 | ScalarmaxProcs | read-only | mandatory | The total number of process structures allocated for use. |
| 1.3.6.1.4.1.15.2.2.14 | ScalarmostProcs | read-only | mandatory | The maximum number of active processes since the Annex was booted. |
| 1.3.6.1.4.1.15.2.2.15 | ScalaractiveProcs | read-only | mandatory | The number of currently active processes. |
| 1.3.6.1.4.1.15.2.2.16 | ScalarcpuIRescheds | read-only | mandatory | The number of processes whose time slice has expired in the last minute. |
| 1.3.6.1.4.1.15.2.2.17 | ScalarcpuTRescheds | read-only | mandatory | The total number of processes whose time slice has expired since booting the Annex. |
| 1.3.6.1.4.1.15.2.2.18 | ScalarcontextISwtchs | read-only | mandatory | The number of context switches in the last minute. |
| 1.3.6.1.4.1.15.2.2.19 | ScalarcontextTSwtchs | read-only | mandatory | The total number of context switches since booting the Annex. |
| 1.3.6.1.4.1.15.2.2.20 | ScalarcpuIActivates | read-only | mandatory | The number of processes that were activated in the last minute. |
| 1.3.6.1.4.1.15.2.2.21 | ScalarcpuTActivates | read-only | mandatory | The number of processes that were activated since booting the Annex. |
| 1.3.6.1.4.1.15.2.2.22 | ScalarmaxCallouts | read-only | mandatory | The number of allocated Callout structures for timed events in the Annex. |
| 1.3.6.1.4.1.15.2.2.23 | ScalarleastCallouts | read-only | mandatory | The minimum number of Callout structures available since last booting the Annex. |
| 1.3.6.1.4.1.15.2.2.24 | ScalarfreeCallouts | read-only | mandatory | The current number of free Callout structures. |
| 1.3.6.1.4.1.15.2.3 | Nodeports | |||
| 1.3.6.1.4.1.15.2.3.1 | ScalartotalPorts | read-only | mandatory | The number of serial ports on this Annex. |
| 1.3.6.1.4.1.15.2.3.2 | ScalartotalInChars | read-only | mandatory | The total number of characters received on all serial ports. |
| 1.3.6.1.4.1.15.2.3.3 | ScalartotalOutChars | read-only | mandatory | The total number of characters transmitted on all serial ports. |
| 1.3.6.1.4.1.15.2.3.4 | ScalartotalParityErrs | read-only | mandatory | The total number of parity errors detected on all serial ports. |
| 1.3.6.1.4.1.15.2.3.5 | ScalartotalOverrunErrs | read-only | mandatory | The total number of overruns detected on all serial ports. |
| 1.3.6.1.4.1.15.2.3.6 | ScalartotalFramingErrs | read-only | mandatory | The total number of framing errors detected on all serial ports. |
| 1.3.6.1.4.1.15.2.3.7 | TableportTable | not-accessible | mandatory | Table of port entries. |
| 1.3.6.1.4.1.15.2.3.7.1 | RowportEntry | not-accessible | mandatory | The port's configuration parameters. |
| 1.3.6.1.4.1.15.2.3.7.1.1 | ColumnanxpPortIndex | read-only | mandatory | A unique number from 1 to totalPorts that identifies each serial port. |
| 1.3.6.1.4.1.15.2.3.7.1.2 | ColumnanxpMode | read-write | mandatory | This parameter defines the mode for access to the serial line port. The default is cli |
| 1.3.6.1.4.1.15.2.3.7.1.3 | ColumnanxpCtrlLines | read-write | mandatory | The type of hardware control used on the port: modem control (dcddtr), flow control (ctsrts), or both. |
| 1.3.6.1.4.1.15.2.3.7.1.4 | ColumnanxpBidirModem | read-write | mandatory | This parameter controls whether the port is configured for adaptive use with a bidirectional modem. |
| 1.3.6.1.4.1.15.2.3.7.1.5 | ColumnanxpAllowBcast | read-write | mandatory | Controls whether the serial port can receive administrative broadcast messages. |
| 1.3.6.1.4.1.15.2.3.7.1.6 | ColumnanxpBcastDirection | read-write | mandatory | Defines the direction that an administrative broadcast message is sent. This parameter is valid only when the port is defined as a slave port by the anxpMode p… |
| 1.3.6.1.4.1.15.2.3.7.1.7 | ColumnanxpInputStartChar | read-write | mandatory | The control character sequence that restarts input if the charPortInFlowType parameter (in the char MIB) is set to xonXoff. |
| 1.3.6.1.4.1.15.2.3.7.1.8 | ColumnanxpInputStopChar | read-write | mandatory | The control character sequence that stops input if the charPortInFlowType parameter (in the char MIB) is set to xonXoff. |
| 1.3.6.1.4.1.15.2.3.7.1.9 | ColumnanxpOutputStartChar | read-write | mandatory | The control character sequence that restarts output if the charPortOutFlowType parameter (in the char MIB) is set to xonXoff. |
| 1.3.6.1.4.1.15.2.3.7.1.10 | ColumnanxpOutputStopChar | read-write | mandatory | The control character sequence that stops output if the charPortOutFlowType parameter (in the char MIB) is set to xonXoff. |
| 1.3.6.1.4.1.15.2.3.7.1.11 | ColumnanxpIxanyFlowCtl | read-write | mandatory | This parameter specifies whether any input character will be treated as a start (xon) character when output has been suspended by a stop (xoff) character. |
| 1.3.6.1.4.1.15.2.3.7.1.12 | ColumnanxpLongBreak | read-write | mandatory | This parameter controls whether the Annex returns the user to the CLI prompt after receiving a break greater than two seconds. |
| 1.3.6.1.4.1.15.2.3.7.1.13 | ColumnanxpShortBreak | read-write | mandatory | This parameter controls whether the Annex returns the user to the CLI prompt after receiving a break shorter than two seconds. |
| 1.3.6.1.4.1.15.2.3.7.1.14 | ColumnanxpForwardTimer | read-write | mandatory | This parameter defines the inter-character timer that sets the amount of time, in tens of milliseconds, that will elapse before forwarding the received data. T… |
| 1.3.6.1.4.1.15.2.3.7.1.15 | ColumnanxpForwardCount | read-write | mandatory | Specifies the number of received characters buffered for the port by the Annex before forwarding the characters to the host or network. |
| 1.3.6.1.4.1.15.2.3.7.1.16 | ColumnanxpImask7Bits | read-write | mandatory | When enabled, instructs the Annex to ignore the eighth bit of all received characters on the port. |
| 1.3.6.1.4.1.15.2.3.7.1.17 | ColumnanxpAttnChar | read-write | mandatory | Defines a control character sequence as an attention character to return the user to the CLI prompt. The Annex-II only allows a single control character (eg. ^… |
| 1.3.6.1.4.1.15.2.3.7.1.18 | ColumnanxpInputBufSize | read-write | mandatory | The number of 256-byte blocks allocated to receive input characters from this port. |
| 1.3.6.1.4.1.15.2.3.7.1.19 | ColumnanxpInputIsActivity | read-write | mandatory | Controls whether received input characters are considered as activity for the port. |
| 1.3.6.1.4.1.15.2.3.7.1.20 | ColumnanxpOutputIsActivity | read-write | mandatory | Controls whether transmitted output characters are considered as activity for the port. |
| 1.3.6.1.4.1.15.2.3.7.1.21 | ColumnanxpInactivityTimer | read-write | mandatory | The amount of time, in minutes, which a port can remain inactive before the Annex terminates all sessions and resets the port. A value of 0 disables the timer. |
| 1.3.6.1.4.1.15.2.3.7.1.22 | ColumnanxpResetIdleTimer | read-write | mandatory | Defines whether input or output resets the idle timer for the port. |
| 1.3.6.1.4.1.15.2.3.7.1.23 | ColumnanxpCliInactivity | read-write | mandatory | The amount of time, in minutes, that the Annex waits before hanging up the serial port after it becomes idle. A value of 0 turns off the timer. A value of 255 … |
| 1.3.6.1.4.1.15.2.3.7.1.24 | ColumnanxpCliSecurity | read-write | mandatory | This parameter controls whether security is enabled for the port. |
| 1.3.6.1.4.1.15.2.3.7.1.25 | ColumnanxpConnectSecurity | read-write | mandatory | This parameter controls whether the host-based security policy is enabled for access from the port to the network. |
| 1.3.6.1.4.1.15.2.3.7.1.26 | ColumnanxpPortServerSecurity | read-write | mandatory | This parameter controls whether the host-based security policy is enabled for access to the port from the port server. |
| 1.3.6.1.4.1.15.2.3.7.1.27 | ColumnanxpPortPassword | read-write | mandatory | This parameter defines a password for the port for local password protection. |
| 1.3.6.1.4.1.15.2.3.7.1.28 | ColumnanxpUserName | read-write | mandatory | A string defining the user name for the user of the serial port. |
| 1.3.6.1.4.1.15.2.3.7.1.29 | ColumnanxpDedicatedAddr | read-write | mandatory | When the anxpMode parameter is set to dedicated, this parameter defines the Internet address of the host to which this port can connect to. |
| 1.3.6.1.4.1.15.2.3.7.1.30 | ColumnanxpDedicatedPort | read-write | mandatory | The application name or TCP port number to which this port can connect when the anxpMode parameter is set to dedicated. The allowed application names are 'teln… |
| 1.3.6.1.4.1.15.2.3.7.1.31 | ColumnanxpPrompt | read-write | mandatory | This parameter defines a port-specific prompt. |
| 1.3.6.1.4.1.15.2.3.7.1.32 | ColumnanxpTermVar | read-write | mandatory | A string defining the type of terminal attached to the serial port. |
| 1.3.6.1.4.1.15.2.3.7.1.33 | ColumnanxpNewLineTerm | read-write | mandatory | This parameter controls whether a carriage return is echoed as just a carriage return (enabled), or whether the carriage return is echoed as a carriage return … |
| 1.3.6.1.4.1.15.2.3.7.1.34 | ColumnanxpEcho | read-write | mandatory | This parameter controls whether the Annex echoes all characters as they are received from the port. |
| 1.3.6.1.4.1.15.2.3.7.1.35 | ColumnanxpMapToLower | read-write | mandatory | When enabled, the Annex translates all upper case characters to lower case as they are received from the port. |
| 1.3.6.1.4.1.15.2.3.7.1.36 | ColumnanxpMapToUpper | read-write | mandatory | When enabled, the Annex translates all lower case characters to upper case as they are transmitted to the port. |
| 1.3.6.1.4.1.15.2.3.7.1.37 | ColumnanxpHardwareTabs | read-write | mandatory | When enabled, this parameter allows the Annex to expand ASCII tab characters. |
| 1.3.6.1.4.1.15.2.3.7.1.38 | ColumnanxpCharErase | read-write | mandatory | This parameter controls whether the Annex echoes the character erase and word erase characters for a video terminal (enabled) or for a hard-copy terminal (disa… |
| 1.3.6.1.4.1.15.2.3.7.1.39 | ColumnanxpLineErase | read-write | mandatory | This parameter controls whether the Annex echoes the line erase character for a video terminal (enabled) or for a hard-copy terminal (disabled). |
| 1.3.6.1.4.1.15.2.3.7.1.40 | ColumnanxpEraseChar | read-write | mandatory | Defines the character erase control character sequence. |
| 1.3.6.1.4.1.15.2.3.7.1.41 | ColumnanxpEraseWord | read-write | mandatory | Defines the word erase control character sequence. |
| 1.3.6.1.4.1.15.2.3.7.1.42 | ColumnanxpEraseLine | read-write | mandatory | Defines the line erase control character sequence. |
| 1.3.6.1.4.1.15.2.3.7.1.43 | ColumnanxpRedisplayLine | read-write | mandatory | Defines the reprint line control character sequence. |
| 1.3.6.1.4.1.15.2.3.7.1.44 | ColumnanxpToggleOutput | read-write | mandatory | Defines the flush control character used to flush the output buffer. |
| 1.3.6.1.4.1.15.2.3.7.1.45 | ColumnanxpTelnetEscape | read-write | mandatory | Defines the control character that returns the user to the telnet: prompt when running the CLI telnet command. |
| 1.3.6.1.4.1.15.2.3.7.1.46 | ColumnanxpNeedDsr | read-write | mandatory | Specifies whether the DSR signal needs to be asserted when connecting to a slave port. |
| 1.3.6.1.4.1.15.2.3.7.1.47 | ColumnanxpTelnetCRLF | read-write | mandatory | Defines what characters are transmitted out the port to the network when the End-of-Line character is sensed. 'enabled' means transmit Line-Feed and Carriage-R… |
| 1.3.6.1.4.1.15.2.3.7.1.48 | ColumnanxpLatbEnable | read-only | mandatory | Controls interpretation of LAT Data-B packets received from host. |
| 1.3.6.1.4.1.15.2.3.7.1.49 | ColumnanxpSlipSecure | read-only | mandatory | If anxEnableSecurity is not set, this parameter selects slip session logging. If anxEnableSecurity is set, this parameter permits slip access only from secure … |
| 1.3.6.1.4.1.15.2.3.7.1.50 | ColumnanxpNetLocalAddr | read-write | mandatory | The Internet address for the Annex's side of the point-to-point (SLIP or PPP) link. |
| 1.3.6.1.4.1.15.2.3.7.1.51 | ColumnanxpNetRemoteAddr | read-write | mandatory | The Internet address for the host at the remote end of the point-to-point (SLIP or PPP) link. |
| 1.3.6.1.4.1.15.2.3.7.1.52 | ColumnanxpSlipSubnetMask | read-write | mandatory | The subnet mask for this SLIP interface. |
| 1.3.6.1.4.1.15.2.3.7.1.53 | ColumnanxpSlipLoadDumpHost | read-write | mandatory | The Internet address of the host from which the Annex receives a load or to which the Annex sends a dump over the SLIP interface. |
| 1.3.6.1.4.1.15.2.3.7.1.54 | ColumnanxpNetMetric | read-write | mandatory | This parameter defines the hop count to the remote end of the SLIP or PPP interface. |
| 1.3.6.1.4.1.15.2.3.7.1.55 | ColumnanxpSlipAllowDump | read-write | mandatory | This parameter defines whether the Annex is allowed to dump across a SLIP link. |
| 1.3.6.1.4.1.15.2.3.7.1.56 | ColumnanxpSlipDoCompression | read-write | mandatory | When enabled, the Annex will start TCP/IP header compression on this SLIP link. |
| 1.3.6.1.4.1.15.2.3.7.1.57 | ColumnanxpSlipAllowCompression | read-write | mandatory | When enabled, the Annex will use TCP/IP header compression on this SLIP link only if the other end of the SLIP link initiates the compression. |
| 1.3.6.1.4.1.15.2.3.7.1.58 | ColumnanxpSlipMtuSize | read-write | mandatory | Force the compressed SLIP interface to use a Maximum Transmission Unit (MTU) of either 1024 bytes (large) or 256 bytes (small). The default is large. |
| 1.3.6.1.4.1.15.2.3.7.1.59 | ColumnanxpSlipNoIcmp | read-write | mandatory | When enabled, the Annex will discard any ICMP packets directed to this SLIP link. |
| 1.3.6.1.4.1.15.2.3.7.1.60 | ColumnanxpSlipTos | read-write | mandatory | When enabled, the Annex sends interactive traffic over this SLIP link before any other traffic. |
| 1.3.6.1.4.1.15.2.3.7.1.61 | ColumnanxpPppMru | read-write | mandatory | This parameter defines the maximum receive unit in bytes. The default value is 1500. |
| 1.3.6.1.4.1.15.2.3.7.1.62 | ColumnanxpPppAcm | read-write | mandatory | This parameter specifies which of the first 32 bytes (0x00, ... 0x1F) can be sent as clear text and which need to be escaped. A bit on in the mask indicates th… |
| 1.3.6.1.4.1.15.2.3.7.1.63 | ColumnanxpPppSecurityProto | read-write | mandatory | Defines which security protocol will be used to authenticate the remote user. This parameter must be set and the Annex enable_security (anxEnableSecurity) must… |
| 1.3.6.1.4.1.15.2.3.7.1.64 | ColumnanxpPppUserRemote | read-write | mandatory | The username used by the Annex to identify itself if the remote PPP peer asks for authentication. Reading this parameter will return either <set> if the userna… |
| 1.3.6.1.4.1.15.2.3.7.1.65 | ColumnanxpPppPasswdRemote | read-write | mandatory | The username used by the Annex to identify itself if the remote PPP peer asks for authentication. Reading this parameter will return either <set> if the passwo… |
| 1.3.6.1.4.1.15.2.3.7.1.66 | ColumnanxpLatAuthGroupVal | read-write | mandatory | This port parameter specifies which remote group codes are accessible to a user on a particular Annex port. Each port has its own set of group codes. |
| 1.3.6.1.4.1.15.2.3.7.1.67 | ColumnanxpPppDialupAddr | read-write | mandatory | When enabled, the Annex requests the PPP dialup addresses from the host-based ACP. |
| 1.3.6.1.4.1.15.2.3.7.1.68 | ColumnanxpBanner | read-write | mandatory | Specifies whether the Annex banner and message- of-the-day are displayed on the port. The default is enabled. |
| 1.3.6.1.4.1.15.2.3.7.1.69 | ColumnanxpPsHistory | read-write | mandatory | Specifies how much data to buffer on a slave port. |
| 1.3.6.1.4.1.15.2.3.7.1.70 | ColumnanxpLocation | read-write | mandatory | A descriptive string for a this port. This string is displayed by the CLI who command. |
| 1.3.6.1.4.1.15.2.3.7.1.71 | ColumnanxpType | read-write | mandatory | The type of device attached to the port. The default is hardwired. |
| 1.3.6.1.4.1.15.2.3.7.1.72 | ColumnanxpCliImask7 | read-write | mandatory | Defines whether input at the CLI is masked to 7 bitx. The default is disabled. |
| 1.3.6.1.4.1.15.2.4 | Nodeparallelport | |||
| 1.3.6.1.4.1.15.2.4.1 | ScalaranxpParaPorts | read-only | mandatory | The number of parallel ports on this Annex. |
| 1.3.6.1.4.1.15.2.4.2 | TableanxpParaPortTable | not-accessible | mandatory | Table of parallel port parameters. |
| 1.3.6.1.4.1.15.2.4.2.1 | RowanxpParaPortEntry | not-accessible | mandatory | The Annex parallel port configuration parameters. |
| 1.3.6.1.4.1.15.2.4.2.1.1 | ColumnanxpParaPortIndex | read-only | mandatory | A unique number from 1 to anxpParaPorts that identifies each parallel port. |
| 1.3.6.1.4.1.15.2.4.2.1.2 | ColumnanxpParaPortHardwareTabs | read-write | mandatory | This parameter controls whether the Annex will send a tab character to the printer. If disabled, the tab is replaced with spaces. |
| 1.3.6.1.4.1.15.2.4.2.1.3 | ColumnanxpParaPortMapToUpper | read-write | mandatory | When enabled, the Annex translates all lower case characters to upper case before transmitting the characters to the printer port. |
| 1.3.6.1.4.1.15.2.4.2.1.4 | ColumnanxpParaPortPrinterWidth | read-write | mandatory | The defined maximum number of characters per printer line. |
| 1.3.6.1.4.1.15.2.4.2.1.5 | ColumnanxpParaPortInterface | read-write | mandatory | The type of printer attached to the port. |
| 1.3.6.1.4.1.15.2.4.2.1.6 | ColumnanxpParaPortSpeed | read-write | mandatory | The printer speed on the Micro-Annex. |
| 1.3.6.1.4.1.15.2.5 | Nodeannexconfig | |||
| 1.3.6.1.4.1.15.2.5.1 | ScalaranxInetAddr | read-write | mandatory | The Internet address of the Annex. |
| 1.3.6.1.4.1.15.2.5.2 | ScalaranxPrefLoadAddr | read-write | mandatory | The preferred load address for the Annex. |
| 1.3.6.1.4.1.15.2.5.3 | ScalaranxPrefDumpAddr | read-write | mandatory | The preferred dump address for the Annex. |
| 1.3.6.1.4.1.15.2.5.4 | ScalaranxLoadDumpGateway | read-write | mandatory | The Internet address of a gateway used when the preferred load or dump host is on a different network or subnet. |
| 1.3.6.1.4.1.15.2.5.5 | ScalaranxLoadDumpSeq | read-write | mandatory | Lists the available network interfaces and the order that the Annex uses them when doing a down-line load or up-line dump. |
| 1.3.6.1.4.1.15.2.5.6 | ScalaranxLoadBcast | read-write | mandatory | This parameter defines whether the Annex broadcasts for the config or the motd files if they were not found on the preferred load host. |
| 1.3.6.1.4.1.15.2.5.7 | ScalaranxServerCap | read-write | mandatory | Defines whether the Annex can act as a file server host for another Annex. The allowable values are 'all', 'none' (the default), or one or more of the followin… |
| 1.3.6.1.4.1.15.2.5.8 | ScalaranxTimeBcast | read-write | mandatory | This parameter defines whether the Annex broadcasts for the time if the preferred load host does not provide a time server. |
| 1.3.6.1.4.1.15.2.5.9 | ScalaranxBcastAddr | read-write | mandatory | The Internet address used by the Annex when sending broadcasts. |
| 1.3.6.1.4.1.15.2.5.10 | ScalaranxSubnetMask | read-write | mandatory | The Internet subnet mask. |
| 1.3.6.1.4.1.15.2.5.11 | ScalaranxAuthAgent | read-write | mandatory | This parameter controls whether the Annex can send an ICMP Address Mask Reply to a received ICMP Address Mask Request. |
| 1.3.6.1.4.1.15.2.5.12 | ScalaranxMaxVcli | read-write | mandatory | The maximum number of virtual CLI connections allowed by the Annex at any one time. 0 means the Annex does not allow VCLI connections. 255 allows the Annex to … |
| 1.3.6.1.4.1.15.2.5.13 | ScalaranxIpEncapType | read-write | mandatory | This parameter specifies whether the Annex encapsulates IP packets in the Ethernet format or the IEEE 802.2/802.3 Data Link Layer format. |
| 1.3.6.1.4.1.15.2.5.14 | ScalaranxNameServer1Type | read-write | mandatory | The name service type used by the primary nameserver host. |
| 1.3.6.1.4.1.15.2.5.15 | ScalaranxNameServer1Addr | read-write | mandatory | The Internet address of the primary nameserver host. |
| 1.3.6.1.4.1.15.2.5.16 | ScalaranxNameServer2Type | read-write | mandatory | The name service type used by the secondary nameserver host. |
| 1.3.6.1.4.1.15.2.5.17 | ScalaranxNameServer2Addr | read-write | mandatory | The Internet address of the secondary nameserver host. |
| 1.3.6.1.4.1.15.2.5.18 | ScalaranxNameServerBcast | read-write | mandatory | This parameter controls whether the Annex broadcasts a name server request if the preferred name servers do not respond. |
| 1.3.6.1.4.1.15.2.5.19 | ScalaranxRwhod | read-write | mandatory | Defines whether the Annex listens for RWHO broadcasts when building its host table. |
| 1.3.6.1.4.1.15.2.5.20 | ScalaranxMinUniqueHostNames | read-write | mandatory | Defines whether the Annex minimum uniqueness feature is available. |
| 1.3.6.1.4.1.15.2.5.21 | ScalaranxHostTableSize | read-write | mandatory | Defines the number of entries in the Annex host table. 0 indicates no host table. 251 sets no limit on the size of the table. |
| 1.3.6.1.4.1.15.2.5.22 | ScalaranxRouted | read-write | mandatory | Defines whether the RIP-listener of the routing daemon on the Annex is enabled. |
| 1.3.6.1.4.1.15.2.5.23 | ScalaranxEnableSecurity | read-write | mandatory | This parameter controls whether the Annex security system is enabled. |
| 1.3.6.1.4.1.15.2.5.24 | ScalaranxPassword | read-write | mandatory | Setting this parameter changes the Annex's administration password. Reading this parameter will return either <set> if the password is defined or <unset> if th… |
| 1.3.6.1.4.1.15.2.5.25 | ScalaranxSecurServer1Addr | read-write | mandatory | The Internet address of the primary host where the Annex sends its security requests. |
| 1.3.6.1.4.1.15.2.5.26 | ScalaranxSecurServer2Addr | read-write | mandatory | The Internet address of the secondary host where the Annex sends its security requests. |
| 1.3.6.1.4.1.15.2.5.27 | ScalaranxNetTurnAround | read-write | mandatory | The amount of time (in seconds) that the Annex waits for a response from a security server. |
| 1.3.6.1.4.1.15.2.5.28 | ScalaranxSecurBcast | read-write | mandatory | This parameter controls whether the Annex will broadcast its security requests when neither of the preferred security servers are available. |
| 1.3.6.1.4.1.15.2.5.29 | ScalaranxVcliSecurity | read-write | mandatory | This parameter controls whether the Annex performs user validation on the virtual CLI connections. |
| 1.3.6.1.4.1.15.2.5.30 | ScalaranxVcliPassword | read-write | mandatory | This parameter defines a password used by the Annex when setting up a virtual CLI connection. |
| 1.3.6.1.4.1.15.2.5.31 | ScalaranxAcpKey | read-write | mandatory | This parameter defines the Annex's encryption key used when exchanging messages between the Annex and the security server. |
| 1.3.6.1.4.1.15.2.5.32 | ScalaranxSysLogMask | read-write | mandatory | Defines the priority levels of events logged in the Annex syslog file. The allowable values are 'all', 'none', or one or more of the following level names sepa… |
| 1.3.6.1.4.1.15.2.5.33 | ScalaranxSysLogFacility | read-write | mandatory | This parameter defines the 4.3BSD syslog facility used in logging the Annex messages. |
| 1.3.6.1.4.1.15.2.5.34 | ScalaranxSysLogHost | read-write | mandatory | The Internet address of the host configured to log Annex messages. |
| 1.3.6.1.4.1.15.2.5.35 | ScalaranxCliPrompt | read-write | mandatory | The string used by the Annex to prompt all CLI users. |
| 1.3.6.1.4.1.15.2.5.36 | ScalaranxMotdFile | read-write | mandatory | The host file name that contains the message-of-the-day for the Annex. |
| 1.3.6.1.4.1.15.2.5.37 | ScalaranxTftpDirName | read-write | mandatory | Specifies the directory name to be prepended to all files (boot image, motd, macros, etc.) when booting via TFTP. |
| 1.3.6.1.4.1.15.2.5.38 | ScalaranxTftpDumpName | read-write | mandatory | The full pathname of the TFTP dump file, if any. |
| 1.3.6.1.4.1.15.2.5.39 | ScalaranxTimeZone | read-write | mandatory | Defines the timezone where the Annex resides in minutes west of GMT. |
| 1.3.6.1.4.1.15.2.5.40 | ScalaranxDaylightSavings | read-write | mandatory | Defines the daylight savings time for the geographic location of the Annex. |
| 1.3.6.1.4.1.15.2.5.41 | ScalaranxLatKey | read-write | mandatory | The Annex specific LAT key used to enable or disable the LAT protocol. |
| 1.3.6.1.4.1.15.2.5.42 | ScalaranxCircuitTimer | read-write | mandatory | The time interval in tens of milliseconds between the transmission of LAT packets. |
| 1.3.6.1.4.1.15.2.5.43 | ScalaranxFacilityNum | read-write | mandatory | The LAT facility number. |
| 1.3.6.1.4.1.15.2.5.44 | ScalaranxLatGroupVal | read-write | mandatory | The Annex LAT group code for permitting access to LAT services. To access a specific LAT service, the Annex must have at least one enabled group code match the… |
| 1.3.6.1.4.1.15.2.5.45 | ScalaranxKeepAliveTimer | read-write | mandatory | The time interval, in seconds, between the transmission of identification packets during times of network inactivity. |
| 1.3.6.1.4.1.15.2.5.46 | ScalaranxReXmitLimit | read-write | mandatory | The number of times to retransmit a packet before notifying the user of a network failure. |
| 1.3.6.1.4.1.15.2.5.47 | ScalaranxServerName | read-write | mandatory | A string of up to 16 characters used to name the Annex in the LAT protocol. |
| 1.3.6.1.4.1.15.2.5.48 | ScalaranxServiceLimit | read-write | mandatory | This parameter defines the upper bound on the number of services that the Annex can maintain in its local service table. |
| 1.3.6.1.4.1.15.2.5.49 | ScalaranxConfigFile | read-write | mandatory | The name of the host file that contains the alias and menu entries. |
| 1.3.6.1.4.1.15.2.5.50 | ScalaranxLatVcliGroupVal | read-write | mandatory | This Annex parameter specifies which remote group codes are accessible to virtual cli users. All virtual cli users have the same group code. The value is displ… |
| 1.3.6.1.4.1.15.2.5.51 | ScalaranxLatQueueMax | read-write | mandatory | Defines the maximum number of host requests (HIC's) that the Annex will save in its internal queue when the requested resource is not available (port busy). |
| 1.3.6.1.4.1.15.2.5.52 | ScalaranxLatLocation | read-write | mandatory | A string of up to 32 characters used to identify the location of the Annex for the LAT protocol. |
| 1.3.6.1.4.1.15.2.5.53 | ScalaranxDisabledModules | read-write | mandatory | Defines which selectable modules are currently disabled. The allowable values are 'all', 'none' or one or more of the following names separated by commas: 'adm… |
| 1.3.6.1.4.1.15.2.5.54 | ScalaranxSysLogPort | read-write | mandatory | Specifies the Annex port number where syslog messages are sent. If set to 0, syslog messages are not sent to an Annex port. This is independent of any host-bas… |
| 1.3.6.1.4.1.15.2.6 | Nodeannexcmds | |||
| 1.3.6.1.4.1.15.2.6.1 | ScalaranxcBoot | read-write | mandatory | The type of boot to be performed. To initiate a dump, this parameter needs to be set by the management station. The values stored in anxcBootImage, anxcBootTim… |
| 1.3.6.1.4.1.15.2.6.2 | ScalaranxcBootImage | read-write | mandatory | The name of the image file to be used with the boot command. |
| 1.3.6.1.4.1.15.2.6.3 | ScalaranxcBootTime | read-write | mandatory | The time at which the next boot is scheduled in HH:MM format. |
| 1.3.6.1.4.1.15.2.6.4 | ScalaranxcBootMsg | read-write | mandatory | The broadcast message to be displayed when the next boot is performed. |
| 1.3.6.1.4.1.15.2.6.5 | ScalaranxcReset | read-write | mandatory | Writing a value to this object causes the annex to reset the appropriate subsystem. |
| 1.3.6.1.4.1.15.2.6.6 | ScalaranxcBcast | read-write | mandatory | Writing a value to this object causes the annex to send the message in anxcBcastMsg to the specified port set. |
| 1.3.6.1.4.1.15.2.6.7 | ScalaranxcBcastMsg | read-write | mandatory | The message to be broadcast to the Annex ports. |