APCUPS-MIB
110 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318 | Nodeapc | |||
| 1.3.6.1.4.1.318.1 | Nodeproducts | |||
| 1.3.6.1.4.1.318.1.2 | Nodesoftware | |||
| 1.3.6.1.4.1.318.1.2.2 | NodepowerChuteDMIAgent | |||
| 1.3.6.1.4.1.318.1.2.2.1 | NodedmtfGroups | |||
| 1.3.6.1.4.1.318.1.2.2.1.1 | TabletComponentid | not-accessible | mandatory | This group defines the attributes common to all components. This groupis required. |
| 1.3.6.1.4.1.318.1.2.2.1.1.1 | RoweComponentid | not-accessible | mandatory | |
| 1.3.6.1.4.1.318.1.2.2.1.1.1.1 | Columna1Manufacturer | read-only | mandatory | Manufacturer of this system. |
| 1.3.6.1.4.1.318.1.2.2.1.1.1.2 | Columna1Product | read-only | mandatory | Product name for this system. |
| 1.3.6.1.4.1.318.1.2.2.1.1.1.3 | Columna1Version | read-only | mandatory | Version number of this system. |
| 1.3.6.1.4.1.318.1.2.2.1.1.1.4 | Columna1SerialNumber | read-only | mandatory | Serial number for this system. |
| 1.3.6.1.4.1.318.1.2.2.1.1.1.5 | Columna1Installation | read-only | mandatory | The time and date when this component was installed. |
| 1.3.6.1.4.1.318.1.2.2.1.1.1.6 | Columna1Verify | read-only | mandatory | A code that provides a level of verification that the component is stillinstalled and working. |
| 1.3.6.1.4.1.318.1.2.2.1.2 | TabletUpsBattery | not-accessible | mandatory | The UPS Battery group contains information regarding the UPSsystem's battery status. |
| 1.3.6.1.4.1.318.1.2.2.1.2.1 | RoweUpsBattery | not-accessible | mandatory | |
| 1.3.6.1.4.1.318.1.2.2.1.2.1.1 | Columna2BatteryStatus | read-only | mandatory | The indication of the capacity remaining in the UPS system's batteries. Avalue of 'battery normal' indicates that the remaining estimated minutes of run-time i… |
| 1.3.6.1.4.1.318.1.2.2.1.2.1.2 | Columna2SecondsOnBattery | read-only | mandatory | If the UPS is on battery power, the elapsed time in seconds since theUPS last switched to battery power, or the time since the UPS component software waslast r… |
| 1.3.6.1.4.1.318.1.2.2.1.2.1.3 | Columna2EstimatedMinutesRemaining | read-only | mandatory | An estimate in minutes of the time to battery charge depletion under thepresent load conditions if the utility power is off and remains off, or if it were to b… |
| 1.3.6.1.4.1.318.1.2.2.1.2.1.4 | Columna2EstimatedChargeRemaining | read-only | mandatory | An estimate of the time to battery charge depletion under the present load conditions if theutility power is off and remains off, or if it were to be lost and … |
| 1.3.6.1.4.1.318.1.2.2.1.2.1.5 | Columna2BatteryVoltage | read-only | mandatory | The magnitude of the present battery voltage in 0.1 volts DC. |
| 1.3.6.1.4.1.318.1.2.2.1.2.1.6 | Columna2BatteryCurrent | read-only | mandatory | The present battery current in 0.1 Amps DC. |
| 1.3.6.1.4.1.318.1.2.2.1.2.1.7 | Columna2TemperatureProbeIndex | read-only | mandatory | Index into the Temperature Probe table. This probe indicates the ambienttemperature at or near the UPS battery casing. |
| 1.3.6.1.4.1.318.1.2.2.1.2.1.8 | Columna2FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or it is part of another FRU, this providesan index into the FRU table; 'value = -1' indicates that the group is not a FRU. |
| 1.3.6.1.4.1.318.1.2.2.1.2.1.9 | Columna2OperationalGroupIndex | read-only | mandatory | The index into the Operational State table for this device. |
| 1.3.6.1.4.1.318.1.2.2.1.3 | TabletTemperatureProbe | not-accessible | mandatory | This group defines the attributes for the temperature probes in thissystem. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1 | RoweTemperatureProbe | not-accessible | mandatory | |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.1 | Columna3TemperatureProbeTableIndex | read-only | mandatory | Index into this temperature probe table. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.2 | Columna3TemperatureProbeLocation | read-only | mandatory | Identifies the physical location of the temperature probe. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.3 | Columna3TemperatureProbeDescription | read-only | mandatory | Additional descriptive information about the temperature probe orprobe's location. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.4 | Columna3TemperatureStatus | read-only | mandatory | Defines the status of the temperature monitored by this temperat reprobe. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.5 | Columna3TemperatureProbeTemperatureReading | read-only | mandatory | The present temperature reading of this temperature probe in 1/10th degrees C. 0x8000000 denotes 'unknown' or 'unsupported'. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.6 | Columna3MonitoredTemperatureNominalReading | read-only | mandatory | The nominal temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported' |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.7 | Columna3MonitoredTemperatureNormalMaximum | read-only | mandatory | The normal maximum temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.8 | Columna3MonitoredTemperatureNormalMinimum | read-only | mandatory | The normal minimum temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.9 | Columna3TemperatureProbeMaximum | read-only | mandatory | The maximum temperature reading specified to be readable by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported' |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.10 | Columna3TemperatureProbeMinimum | read-only | mandatory | The minimum temperature reading specified to be readable by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported' |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.11 | Columna3TemperatureReadingLowerThreshold-Non-c | read-write | mandatory | The lower non-critical threshold for the temperature reading set by the user, in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupport d'. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.12 | Columna3TemperatureReadingUpperThreshold-Non-c | read-write | mandatory | The upper non-critical threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.13 | Columna3TemperatureReadingLowerThreshold-Criti | read-write | mandatory | The lower critical threshold for the temperature probe, in 1/10 degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.14 | Columna3TemperatureReadingUpperThreshold-Criti | read-write | mandatory | The upper critical threshold for the temperature probe, in /10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.15 | Columna3TemperatureReadingLowerThreshold-Non-r | read-write | mandatory | The lower non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.16 | Columna3TemperatureReadingUpperThreshold-Non-r | read-write | mandatory | The upper non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.17 | Columna3TemperatureProbeResolution | read-write | mandatory | The resolution for the reading from this temperature probe, in tenths of 1/10th degrees C. '0x80000000 denotes 'unknown' or 'unsupported'. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.18 | Columna3TemperatureProbeTolerance | read-write | mandatory | The tolerance for the reading from this temperature probe, in plus/minus 1/10 degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.19 | Columna3TemperatureProbeAccuracy | read-write | mandatory | The accuracy for the reading from this temperature probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown' or 'unsuppor ed'. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.20 | Columna3FruGroupIndex | read-only | mandatory | Index into the FRU table. A value of -1 indicates that this device is not an FRU. |
| 1.3.6.1.4.1.318.1.2.2.1.3.1.21 | Columna3OperationalGroupIndex | read-only | mandatory | Index into the Operational State table |
| 1.3.6.1.4.1.318.1.2.2.1.4 | TabletOperationalStateTable | not-accessible | mandatory | This group provides the operational state, usage, and availabili y status,and administrative state indicators for specific Device Group instances |
| 1.3.6.1.4.1.318.1.2.2.1.4.1 | RoweOperationalStateTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.318.1.2.2.1.4.1.1 | Columna4OperationalStateInstanceIndex | read-only | mandatory | The Index into the Operational State table. |
| 1.3.6.1.4.1.318.1.2.2.1.4.1.2 | Columna4DeviceGroupIndex | read-only | mandatory | The group ID of the group referencing this instance. |
| 1.3.6.1.4.1.318.1.2.2.1.4.1.3 | Columna4OperationalStatus | read-only | mandatory | The operational status of the Device Group instance. |
| 1.3.6.1.4.1.318.1.2.2.1.4.1.4 | Columna4UsageState | read-only | mandatory | The usage state of the Device Group instance. |
| 1.3.6.1.4.1.318.1.2.2.1.4.1.5 | Columna4AvailabilityStatus | read-only | mandatory | The availability status of the Device Group instance. |
| 1.3.6.1.4.1.318.1.2.2.1.4.1.6 | Columna4AdministrativeState | read-only | mandatory | The administrative state of the Device Group instance. |
| 1.3.6.1.4.1.318.1.2.2.1.4.1.7 | Columna4FatalErrorCount | read-only | mandatory | The accumulated Fatal or Non-recoverable error count for this DeviceGroup instance. |
| 1.3.6.1.4.1.318.1.2.2.1.4.1.8 | Columna4MajorErrorCount | read-only | mandatory | The accumulated Major or Critical error count for this Device Groupinstance. |
| 1.3.6.1.4.1.318.1.2.2.1.4.1.9 | Columna4WarningErrorCount | read-only | mandatory | The accumulated Warning or Non-Critical error count for this DeviceGroup instance. |
| 1.3.6.1.4.1.318.1.2.2.1.4.1.10 | Columna4CurrentErrorStatus | read-only | mandatory | This attribute presents the current error status for this Device Groupinstance. The most critical error status in effect should be presented. I.e. if a part of… |
| 1.3.6.1.4.1.318.1.2.2.1.5 | TabletDiagnostics | not-accessible | mandatory | This group defines the diagnostic functions that are provided by thiscomponent for analyzing potential failures within the component. A diagnosticfunction coul… |
| 1.3.6.1.4.1.318.1.2.2.1.5.1 | RoweDiagnostics | not-accessible | mandatory | |
| 1.3.6.1.4.1.318.1.2.2.1.5.1.1 | Columna5DiagnosticFunctionTableIndex | read-only | mandatory | A unique identifier for this specific diagnostic function. |
| 1.3.6.1.4.1.318.1.2.2.1.5.1.2 | Columna5DiagnosticFunctionName | read-only | mandatory | A specific descriptive name of the diagnostic function, includin versioninformation, if relevant. |
| 1.3.6.1.4.1.318.1.2.2.1.5.1.3 | Columna5DiagnosticFunctionDescription | read-only | mandatory | A description of what this diagnostic function does. |
| 1.3.6.1.4.1.318.1.2.2.1.5.1.4 | Columna5ExclusiveAccessRequired | read-only | mandatory | Indicates whether this diagnostic function requires exclusive access tothe device or component, implying that the user or management applicati n must takesome … |
| 1.3.6.1.4.1.318.1.2.2.1.5.1.5 | Columna5PrerequisiteConditions | read-only | mandatory | Indicates what conditions must be met before this diagnostic functioncan be run. |
| 1.3.6.1.4.1.318.1.2.2.1.5.1.6 | Columna5PrerequisiteDiagnosticFunction | read-only | mandatory | If non-0, this specifies the ID of another diagnostic function that must berun immediately prior to this one. |
| 1.3.6.1.4.1.318.1.2.2.1.6 | TabletDiagnosticRequestGroup | not-accessible | mandatory | This group defines the attributes which a management application usesto request an actual diagnostic analysis. |
| 1.3.6.1.4.1.318.1.2.2.1.6.1 | RoweDiagnosticRequestGroup | not-accessible | mandatory | |
| 1.3.6.1.4.1.318.1.2.2.1.6.1.1 | Columna6DiagnosticFunctionReserveKey | read-write | mandatory | Indicates whether the interface to this component's diagnostic functionsis reserved. A zero value returned on a get indicates that a reserve is already in effe… |
| 1.3.6.1.4.1.318.1.2.2.1.6.1.2 | Columna6DiagnosticFunctionRequest | read-write | mandatory | The ID of the specific diagnostic function which is being requested. Ifthe interface is reserved, a set request to this attribute should also set the Diagnosti… |
| 1.3.6.1.4.1.318.1.2.2.1.6.1.3 | Columna6DiagnosticFunctionResult | read-only | mandatory | The integer-based result code of the last diagnostic function run. |
| 1.3.6.1.4.1.318.1.2.2.1.7 | TabletDiagnosticResults | not-accessible | mandatory | This group defines the attributes for interpreting diagnostic functionresult codes. |
| 1.3.6.1.4.1.318.1.2.2.1.7.1 | RoweDiagnosticResults | not-accessible | mandatory | |
| 1.3.6.1.4.1.318.1.2.2.1.7.1.1 | Columna7DiagnosticFunctionId | read-only | mandatory | The unique ID for a specific diagnostic function. |
| 1.3.6.1.4.1.318.1.2.2.1.7.1.2 | Columna7DiagnosticFunctionResult | read-only | mandatory | An integer-based result code of the diagnostic function. |
| 1.3.6.1.4.1.318.1.2.2.1.7.1.3 | Columna7DiagnosticFunctionResultDescription | read-only | mandatory | A description of what this result code for this diagnostic functionmeans, including suggested corrective actions, where possible. |
| 1.3.6.1.4.1.318.1.2.2.1.7.1.4 | Columna7FaultIsolatedToThisComponent | read-only | mandatory | An indicator of whether the fault is strictly isolated within the bounds ofthis component. A False value indicates that the fault might be caused by a failingp… |
| 1.3.6.1.4.1.318.1.2.2.1.8 | TabletErrorControlGroup | not-accessible | mandatory | Indication control and status for the parent group. |
| 1.3.6.1.4.1.318.1.2.2.1.8.1 | RoweErrorControlGroup | not-accessible | mandatory | |
| 1.3.6.1.4.1.318.1.2.2.1.8.1.1 | Columna8Selfid | read-only | mandatory | Instance id. A unique number that identifies this row. |
| 1.3.6.1.4.1.318.1.2.2.1.8.1.2 | Columna8NumberOfFatalErrors | read-only | mandatory | Count of all fatal errors since system startup. |
| 1.3.6.1.4.1.318.1.2.2.1.8.1.3 | Columna8NumberOfMajorErrors | read-only | mandatory | Count of all major errors since system startup. |
| 1.3.6.1.4.1.318.1.2.2.1.8.1.4 | Columna8NumberOfWarnings | read-only | mandatory | Count of all warning errors since system startup. |
| 1.3.6.1.4.1.318.1.2.2.1.8.1.5 | Columna8ErrorStatus | read-only | mandatory | current error status |
| 1.3.6.1.4.1.318.1.2.2.1.8.1.6 | Columna8ErrorStatusType | read-only | mandatory | Indicates the type of detection that set the current error status. |
| 1.3.6.1.4.1.318.1.2.2.1.8.1.7 | Columna8AlarmGeneration | read-write | mandatory | Controls indication generation for errors. |
| 1.3.6.1.4.1.318.1.2.2.1.99 | TabletMiftomib | not-accessible | mandatory | This group defines attributes required for DMI to SNMP translati n. |
| 1.3.6.1.4.1.318.1.2.2.1.99.1 | RoweMiftomib | not-accessible | mandatory | |
| 1.3.6.1.4.1.318.1.2.2.1.99.1.1 | Columna99MibName | read-only | mandatory | The MIB name that defines this MIF |
| 1.3.6.1.4.1.318.1.2.2.1.99.1.2 | Columna99MibOid | read-only | mandatory | The MIB Object Identifier that corresponds to this MIF |
| 1.3.6.1.4.1.318.1.2.2.1.99.1.3 | Columna99DisableTrap | read-write | mandatory | This attribute can be changed to disable sending oftraps from this component |
| 1.3.6.1.4.1.318.1.2.2.1.9999 | TabletTrapGroup | not-accessible | mandatory | This group defines attributes needed for Trap definition. This group does not exist in MIF file |
| 1.3.6.1.4.1.318.1.2.2.1.9999.1 | RoweTrapGroup | not-accessible | mandatory | |
| 1.3.6.1.4.1.318.1.2.2.1.9999.1.1 | Columna9999ErrorTime | read-only | mandatory | The Date & Time when the error occured |
| 1.3.6.1.4.1.318.1.2.2.1.9999.1.1 | NodepwrchuteEventError | DMI Service Layer generated event for APC UPS | ||
| 1.3.6.1.4.1.318.1.2.2.1.9999.1.2 | Columna9999ErrorStatus | read-only | mandatory | Error Status Code |
| 1.3.6.1.4.1.318.1.2.2.1.9999.1.3 | Columna9999ErrorGroupId | read-only | mandatory | Group ID of the errorControl Group |
| 1.3.6.1.4.1.318.1.2.2.1.9999.1.4 | Columna9999ErrorInstanceId | read-only | mandatory | Instance ID of the errorControl Group |
| 1.3.6.1.4.1.318.1.2.2.1.9999.1.5 | Columna9999ComponentId | read-only | mandatory | Component ID of the component that caused this error |
| 1.3.6.1.4.1.318.1.2.2.1.9999.1.6 | Columna9999GroupId | read-only | mandatory | Group ID of the Group that caused this error |
| 1.3.6.1.4.1.318.1.2.2.1.9999.1.7 | Columna9999InstanceId | read-only | mandatory | Instance ID of the Group that caused this error |
| 1.3.6.1.4.1.318.1.2.2.1.9999.1.8 | Columna9999VendorCode1 | read-only | mandatory | Vendor specific code 1 |
| 1.3.6.1.4.1.318.1.2.2.1.9999.1.9 | Columna9999VendorCode2 | read-only | mandatory | Vendor specific code 2 |
| 1.3.6.1.4.1.318.1.2.2.1.9999.1.10 | Columna9999VendorText | read-only | mandatory | Vendor specific octet string info |
| 1.3.6.1.4.1.318.1.2.2.1.9999.1.11 | Columna9999ParentGroupId | read-only | mandatory | Group ID of parent of Group that caused this error |
| 1.3.6.1.4.1.318.1.2.2.1.9999.1.12 | Columna9999ParentInstanceId | read-only | mandatory | Instance ID of parent of Group that caused this error |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DmiComponentIndex | INTEGER | ||
| DmiDateX | OCTET STRING (SIZE (28)) | ||
| DmiInteger | INTEGER |