APPC-MIB
306 objects
This is the MIB module for objects used to manage network devices with APPC capabilities.
Imported Objects
| SNA-NAU-MIB | snanauMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 mib-2 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DateAndTime DisplayString InstancePointer TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.34.3 | IdentityappcMIB | This is the MIB module for objects used to manage network devices with APPC capabilities. | ||
| 1.3.6.1.2.1.34.3.1 | NodeappcObjects | |||
| 1.3.6.1.2.1.34.3.1.1 | NodeappcGlobal | |||
| 1.3.6.1.2.1.34.3.1.1.1 | NodeappcCntrlAdminGroup | |||
| 1.3.6.1.2.1.34.3.1.1.1.1 | ScalarappcCntrlAdminStat | read-write | current | Indicates the desired state of statistics collection: notActive collection of counters is not active. active collection of counters is active. When this object… |
| 1.3.6.1.2.1.34.3.1.1.1.2 | ScalarappcCntrlAdminRscv | read-write | current | Indicates the desired state of RSCV information collection: notActive collection of route selection control vectors is not active. active collection of route s… |
| 1.3.6.1.2.1.34.3.1.1.1.3 | ScalarappcCntrlAdminTrace | read-write | current | Indicates the desired state of tracing: notActive collection of tracing information is not active active collection of tracing information is active |
| 1.3.6.1.2.1.34.3.1.1.1.4 | ScalarappcCntrlAdminTraceParm | read-write | current | Specifies the parameter to be used in conjunction with activating tracing. The actual content is implementation dependent. |
| 1.3.6.1.2.1.34.3.1.1.2 | NodeappcCntrlOperGroup | |||
| 1.3.6.1.2.1.34.3.1.1.2.1 | ScalarappcCntrlOperStat | read-only | current | Indicates the current collection options in effect: notActive collection of counters is not active. active collection of counters is active. Statistical entrie… |
| 1.3.6.1.2.1.34.3.1.1.2.2 | ScalarappcCntrlOperStatTime | read-only | current | Time since the appcCntrlOperStat object last changed. This time is in hundreds of a second. |
| 1.3.6.1.2.1.34.3.1.1.2.3 | ScalarappcCntrlOperRscv | read-only | current | Indicates the current collection options in effect: notActive collection of route selection control vectors is not active. active collection of route selection… |
| 1.3.6.1.2.1.34.3.1.1.2.4 | ScalarappcCntrlOperRscvTime | read-only | current | Time since the appcCntrlOperRscv object last changed. This time is in hundreds of a second. |
| 1.3.6.1.2.1.34.3.1.1.2.5 | ScalarappcCntrlOperTrace | read-only | current | Indicates the current state of tracing: notActive collection of tracing information is not active. active collection of tracing information is active. |
| 1.3.6.1.2.1.34.3.1.1.2.6 | ScalarappcCntrlOperTraceTime | read-only | current | Time since the appcCntrlOperTrace object last changed. This time is in hundreds of a second. |
| 1.3.6.1.2.1.34.3.1.1.2.7 | ScalarappcCntrlOperTraceParm | read-only | current | Specifies the parameter used in conjunction with activating tracing. The actual content is implementation dependent. |
| 1.3.6.1.2.1.34.3.1.1.3 | NodeappcGlobalObjects | |||
| 1.3.6.1.2.1.34.3.1.1.3.1 | ScalarappcUpTime | read-only | current | The time, in hundredths of a second, since the APPC portion of the system was last reinitialized. |
| 1.3.6.1.2.1.34.3.1.1.3.2 | ScalarappcDefaultModeName | read-only | current | Specifies the mode name to be used under the following conditions: When an incoming BIND request contains a mode name not defined at the local node. The parame… |
| 1.3.6.1.2.1.34.3.1.1.3.3 | ScalarappcDefaultLuName | read-only | current | Specifies the name of the local LU that is to serve as the default LU. This is the default LU to which are routed inbound BIND requests that exclude the second… |
| 1.3.6.1.2.1.34.3.1.1.3.4 | ScalarappcDefaultImplInbndPlu | read-only | current | Specifies whether or not inbound implicit partner LU support is enabled. The following values are defined: no - Specifies that inbound implicit partner LU supp… |
| 1.3.6.1.2.1.34.3.1.1.3.5 | ScalarappcDefaultMaxMcLlSndSize | read-only | current | Specifies the maximum size of a logical record to be used for a mapped conversation when sending data to either the inbound or outbound implicit partner LU. Th… |
| 1.3.6.1.2.1.34.3.1.1.3.6 | ScalarappcDefaultFileSpec | read-only | current | The local file specification that is to be searched by the APPC attach manager when no DEFINE_TP verb has been issued for the TP name received on an incoming a… |
| 1.3.6.1.2.1.34.3.1.1.3.7 | ScalarappcDefaultTpOperation | read-only | current | Specifies how the program will be started. other - Specifies that the default TP operation is none of the methods specified below. It may be a product-specific… |
| 1.3.6.1.2.1.34.3.1.1.3.8 | ScalarappcDefaultTpConvSecRqd | read-only | current | Specifies whether or not conversation security will be used for default TPs. no - Specifies that the incoming attach does not have to contain security informat… |
| 1.3.6.1.2.1.34.3.1.1.3.9 | ScalarappcLocalCpName | read-only | current | Specifies the name of the local control point. This field is from 0 to 17 characters in length, including a period (.) which separates the NetId from the NAU n… |
| 1.3.6.1.2.1.34.3.1.1.3.10 | ScalarappcActiveSessions | read-only | current | Specifies the total number of active APPC sessions supported by this implementation. Sessions for which both LUs are local are counted twice. |
| 1.3.6.1.2.1.34.3.1.1.3.11 | ScalarappcActiveHprSessions | read-only | current | Specifies the total number of active HPR APPC sessions. |
| 1.3.6.1.2.1.34.3.1.1.4 | NodeappcCnosControl | |||
| 1.3.6.1.2.1.34.3.1.1.4.1 | ScalarappcCnosCommand | read-write | current | Specifies the CNOS command or verb to issue. First set the values of the particular CNOS parameter objects (from the range { appcCnosControl 2 } through { appc… |
| 1.3.6.1.2.1.34.3.1.1.4.2 | ScalarappcCnosMaxSessLimit | read-write | current | Specifies the maximum value that the local LU is to use, during CNOS processing, for the session limit. The local LU, as a target LU, will negotiate a higher s… |
| 1.3.6.1.2.1.34.3.1.1.4.3 | ScalarappcCnosMinCwinLimit | read-write | current | Specifies the default minimum contention winner sessions limit. This parameter should be set to the desired value before setting the command (appcCnosCommand).… |
| 1.3.6.1.2.1.34.3.1.1.4.4 | ScalarappcCnosMinClosLimit | read-write | current | Specifies the default minimum contention loser sessions limit. This parameter should be set to the desired value before setting the command (appcCnosCommand). … |
| 1.3.6.1.2.1.34.3.1.1.4.5 | ScalarappcCnosDrainSelf | read-write | current | Specifies whether the local LU is draining its conversations for this mode. When a mode session limit is reset (via a CNOS RESET_SESSION_LIMIT request), the lo… |
| 1.3.6.1.2.1.34.3.1.1.4.6 | ScalarappcCnosDrainPart | read-write | current | Specifies whether the partner LU is draining its conversations for this mode. When a mode session limit is reset (via a CNOS RESET_SESSION_LIMIT request), the … |
| 1.3.6.1.2.1.34.3.1.1.4.7 | ScalarappcCnosResponsible | read-write | current | Specifies which LU is responsible for selecting and deactivating sessions as a result of a change that decreases the session limit or the maximum number of con… |
| 1.3.6.1.2.1.34.3.1.1.4.8 | ScalarappcCnosForce | read-write | current | Specifies whether the local LU should force the resetting of the session limit when certain error conditions occur that prevent the successful exchange of CNOS… |
| 1.3.6.1.2.1.34.3.1.1.4.9 | ScalarappcCnosTargetLocLuName | read-write | current | The SNA name of the local LU to which the CNOS command is to be applied. This field is from 1 to 17 characters in length, including a period (.) which separate… |
| 1.3.6.1.2.1.34.3.1.1.4.10 | ScalarappcCnosTargetParLuName | read-write | current | The SNA name of the partner LU to which the CNOS command is to be applied. This field is from 1 to 17 characters in length, including a period (.) which separa… |
| 1.3.6.1.2.1.34.3.1.1.4.11 | ScalarappcCnosTargetModeName | read-write | current | Specifies the mode name to which the CNOS command is to be applied. This object should be set to the desired value before setting the command (appcCnosCommand)… |
| 1.3.6.1.2.1.34.3.1.2 | NodeappcLu | |||
| 1.3.6.1.2.1.34.3.1.2.1 | TableappcLluAdminTable | not-accessible | current | APPC Local LU Admin Table. |
| 1.3.6.1.2.1.34.3.1.2.1.1 | RowappcLluAdminEntry | not-accessible | current | Information about local APPC LUs. |
| 1.3.6.1.2.1.34.3.1.2.1.1.1 | ColumnappcLluAdminName | not-accessible | current | Specifies the name of the local LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the … |
| 1.3.6.1.2.1.34.3.1.2.1.1.2 | ColumnappcLluAdminDepType | read-only | current | This value identifies whether the LU is dependent or independent. |
| 1.3.6.1.2.1.34.3.1.2.1.1.3 | ColumnappcLluAdminLocalAddress | read-only | current | The local address for this LU is a byte with a value ranging from 0 to 254. For dependent LUs, this value ranges from 1 to 254; for independent LUs this value … |
| 1.3.6.1.2.1.34.3.1.2.1.1.4 | ColumnappcLluAdminSessLimit | read-only | current | The maximum number of sessions supported by this LU. |
| 1.3.6.1.2.1.34.3.1.2.1.1.5 | ColumnappcLluAdminBindRspMayQ | read-only | current | Indicates whether or not the local LU, as the sender of a BIND request, allows a partner partner LU to delay sending the BIND response if the partner LU cannot… |
| 1.3.6.1.2.1.34.3.1.2.1.1.6 | ColumnappcLluAdminCompression | read-only | current | Specifies whether compression is supported. The local LU uses this value for negotiation during session activation (SNA BIND). prohibited - specifies that no c… |
| 1.3.6.1.2.1.34.3.1.2.1.1.7 | ColumnappcLluAdminInBoundCompLevel | read-only | current | Specifies the maximum level of compression supported for inbound data. The local LU uses this value in conjunction with appcLluAdminCompression for negotiation… |
| 1.3.6.1.2.1.34.3.1.2.1.1.8 | ColumnappcLluAdminOutBoundCompLevel | read-only | current | Specifies the maximum level of compression supported for outbound data. The local LU uses this value in conjunction with appcLluAdminCompression for negotiatio… |
| 1.3.6.1.2.1.34.3.1.2.1.1.9 | ColumnappcLluAdminCompRleBeforeLZ | read-only | current | Specifies whether run-length encoding is to be applied to the data before applying Lempel-Ziv-like compression. The local LU uses this value for negotiation du… |
| 1.3.6.1.2.1.34.3.1.2.1.1.10 | ColumnappcLluAdminAlias | read-only | current | A local alias for the local LU. If not known or not applicable, this object contains a zero-length string. |
| 1.3.6.1.2.1.34.3.1.2.2 | TableappcLluOperTable | not-accessible | current | APPC Local LU Operational Table. |
| 1.3.6.1.2.1.34.3.1.2.2.1 | RowappcLluOperEntry | not-accessible | current | Information about local APPC LUs. |
| 1.3.6.1.2.1.34.3.1.2.2.1.1 | ColumnappcLluOperName | not-accessible | current | Specifies the name of the local LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the … |
| 1.3.6.1.2.1.34.3.1.2.2.1.2 | ColumnappcLluOperDepType | read-only | current | This value identifies whether the LU is dependent or independent. |
| 1.3.6.1.2.1.34.3.1.2.2.1.3 | ColumnappcLluOperLocalAddress | read-only | current | The local address for this LU is a byte with a value ranging from 0 to 254. For dependent LUs, this value ranges from 1 to 254; for independent LUs this value … |
| 1.3.6.1.2.1.34.3.1.2.2.1.4 | ColumnappcLluOperSessLimit | read-only | current | The maximum number of sessions supported by this LU. |
| 1.3.6.1.2.1.34.3.1.2.2.1.5 | ColumnappcLluOperBindRspMayQ | read-only | current | Indicates whether or not the local LU, as the sender of a BIND request, allows a partner LU to delay sending the BIND response if the partner LU cannot process… |
| 1.3.6.1.2.1.34.3.1.2.2.1.6 | ColumnappcLluOperCompression | read-only | current | Specifies whether compression is supported. The local LU uses this value for negotiation during session activation (SNA BIND). prohibited - specifies that no c… |
| 1.3.6.1.2.1.34.3.1.2.2.1.7 | ColumnappcLluOperInBoundCompLevel | read-only | current | Specifies the maximum level of compression supported for inbound data. The local LU uses this value in conjunction with appcLluOperCompression for negotiation … |
| 1.3.6.1.2.1.34.3.1.2.2.1.8 | ColumnappcLluOperOutBoundCompLevel | read-only | current | Specifies the maximum level of compression supported for outbound data. The local LU uses this value in conjunction with appcLluAdminCompression for negotiatio… |
| 1.3.6.1.2.1.34.3.1.2.2.1.9 | ColumnappcLluOperCompRleBeforeLZ | read-only | current | Specifies whether run-length encoding is to be applied to the data before applying Lempel-Ziv-like compression. The local LU uses this value for negotiation du… |
| 1.3.6.1.2.1.34.3.1.2.2.1.10 | ColumnappcLluOperAlias | read-only | current | A local alias for the local LU. If not known or not applicable, this object contains a zero-length string. |
| 1.3.6.1.2.1.34.3.1.2.2.1.11 | ColumnappcLluOperActiveSessions | read-only | current | Specifies the total number of active APPC sessions for this LU. |
| 1.3.6.1.2.1.34.3.1.2.3 | TableappcLuPairAdminTable | not-accessible | current | APPC Partner LU administrative Table |
| 1.3.6.1.2.1.34.3.1.2.3.1 | RowappcLuPairAdminEntry | not-accessible | current | Entry of APPC Partner LU Information Table. It is indexed by the local and partner LU Names. |
| 1.3.6.1.2.1.34.3.1.2.3.1.1 | ColumnappcLuPairAdminLocLuName | not-accessible | current | The SNA name of the local LU to which this partner LU definition applies. This field is from 1 to 17 characters in length, including a period (.) which separat… |
| 1.3.6.1.2.1.34.3.1.2.3.1.2 | ColumnappcLuPairAdminParLuName | not-accessible | current | The SNA name of the partner LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetI… |
| 1.3.6.1.2.1.34.3.1.2.3.1.3 | ColumnappcLuPairAdminParLuAlias | read-only | current | A local alias for the partner LU. If not known or not applicable, this object contains a zero-length string. |
| 1.3.6.1.2.1.34.3.1.2.3.1.4 | ColumnappcLuPairAdminSessLimit | read-only | current | The maximum number of sessions supported by this partner LU. |
| 1.3.6.1.2.1.34.3.1.2.3.1.5 | ColumnappcLuPairAdminSessSec | read-only | current | Specifies the type of session-level security information that a local LU will accept on BIND requests it receives from the partner LU. required - Specifies tha… |
| 1.3.6.1.2.1.34.3.1.2.3.1.6 | ColumnappcLuPairAdminSecAccept | read-only | current | Specifies support for different levels of access security information in ATTACH requests received from this partner LU. Possible values are: none - No access s… |
| 1.3.6.1.2.1.34.3.1.2.3.1.7 | ColumnappcLuPairAdminLinkObjId | read-only | current | Specifies the link associated with this partner LU. This value points to the row in the table containing information on the link instance. (e.g., the sdlcLSAdm… |
| 1.3.6.1.2.1.34.3.1.2.3.1.8 | ColumnappcLuPairAdminParaSessSup | read-only | current | Defined Parallel Sessions Supported. Indicates whether or not multiple sessions between the partner LU and its associated local LU are permitted. Parallel sess… |
| 1.3.6.1.2.1.34.3.1.2.4 | TableappcLuPairOperTable | not-accessible | current | Table of active partner/local LU pairs. Two entries are present in the table when both LUs in a pair are local. |
| 1.3.6.1.2.1.34.3.1.2.4.1 | RowappcLuPairOperEntry | not-accessible | current | Entry representing one partner/local LU pair. |
| 1.3.6.1.2.1.34.3.1.2.4.1.1 | ColumnappcLuPairOperLocLuName | not-accessible | current | The SNA name of the local LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId … |
| 1.3.6.1.2.1.34.3.1.2.4.1.2 | ColumnappcLuPairOperParLuName | not-accessible | current | The SNA name of the partner LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetI… |
| 1.3.6.1.2.1.34.3.1.2.4.1.3 | ColumnappcLuPairOperParLuAlias | read-only | current | A local alias for the partner LU. If not known or not applicable, this object contains a zero-length string. |
| 1.3.6.1.2.1.34.3.1.2.4.1.4 | ColumnappcLuPairOperSessLimit | read-only | current | The maximum number of sessions supported by this partner LU. |
| 1.3.6.1.2.1.34.3.1.2.4.1.5 | ColumnappcLuPairOperSessSec | read-only | current | Specifies the type of security information that a local LU will accept on BIND requests it receives from the partner LU. required - Specifies that the BIND req… |
| 1.3.6.1.2.1.34.3.1.2.4.1.6 | ColumnappcLuPairOperSecAccept | read-only | current | Specifies support for different levels of security acceptance information in ATTACH requests received from this partner LU. Possible values are: none - No acce… |
| 1.3.6.1.2.1.34.3.1.2.4.1.7 | ColumnappcLuPairOperLinkObjId | read-only | current | Specifies the link associated with this partner LU. This value points to the row in the table containing information on the link instance. (e.g., the sdlcLSAdm… |
| 1.3.6.1.2.1.34.3.1.2.4.1.8 | ColumnappcLuPairOperParaSessSup | read-only | current | Active Parallel Sessions Supported. Indicates whether or not multiple session between the partner LU and its associated local LU are permitted. Parallel sessio… |
| 1.3.6.1.2.1.34.3.1.2.4.1.9 | ColumnappcLuPairOperParaSessSupLS | read-only | current | Active Parallel Sessions Supported - last starting value. This object represents the initial value proposed by the local LU the last time this capability was n… |
| 1.3.6.1.2.1.34.3.1.2.4.1.10 | ColumnappcLuPairOperState | read-only | current | The value identifies the current operational state of this LU pair: inactive (1) - no active or pending session exists between the LUs. active (2) - an active … |
| 1.3.6.1.2.1.34.3.1.2.5 | TableappcModeAdminTable | not-accessible | current | APPC Mode Table |
| 1.3.6.1.2.1.34.3.1.2.5.1 | RowappcModeAdminEntry | not-accessible | current | Entry of APPC Mode Information Table. |
| 1.3.6.1.2.1.34.3.1.2.5.1.1 | ColumnappcModeAdminLocLuName | not-accessible | current | The SNA name of the local LU to which this mode definition applies. This field is from 1 to 17 characters in length, including a period (.) which separates the… |
| 1.3.6.1.2.1.34.3.1.2.5.1.2 | ColumnappcModeAdminParLuName | not-accessible | current | The SNA name of the partner LU to which this mode definition applies. This field is from 1 to 17 characters in length, including a period (.) which separates t… |
| 1.3.6.1.2.1.34.3.1.2.5.1.3 | ColumnappcModeAdminModeName | not-accessible | current | Specifies the mode name. A mode defines the characteristics for a group of sessions. The mode name can be blank (8 space characters). |
| 1.3.6.1.2.1.34.3.1.2.5.1.4 | ColumnappcModeAdminCosName | read-only | current | Specifies the class of service (COS) name associated with this mode. If the implementation does not support COS names, a null string is returned. |
| 1.3.6.1.2.1.34.3.1.2.5.1.5 | ColumnappcModeAdminSessEndTpName | read-only | current | Specifies the name of the transaction program (TP) to be invoked when a session using this mode is deactivated or ended. If no such TP is defined, this object … |
| 1.3.6.1.2.1.34.3.1.2.5.1.6 | ColumnappcModeAdminMaxSessLimit | read-only | current | Specifies the maximum value that the local LU is to use, during CNOS processing, for the session limit. The local LU, as a target LU, will negotiate a higher s… |
| 1.3.6.1.2.1.34.3.1.2.5.1.7 | ColumnappcModeAdminMinCwinLimit | read-only | current | Specifies the default minimum contention winner sessions limit. Some implementations internally issue a INITIALIZE_SESSION_LIMIT verb when a Mode is created. T… |
| 1.3.6.1.2.1.34.3.1.2.5.1.8 | ColumnappcModeAdminMinClosLimit | read-only | current | Specifies the default minimum contention loser sessions limit. Some implementations internally issue a INITIALIZE_SESSION_LIMIT verb when a Mode is created. Th… |
| 1.3.6.1.2.1.34.3.1.2.5.1.9 | ColumnappcModeAdminConWinAutoActLmt | read-only | current | Specifies the limit on the number of contention winner sessions to be automatically activated when the minimum number of contention winner sessions increases (… |
| 1.3.6.1.2.1.34.3.1.2.5.1.10 | ColumnappcModeAdminRecvPacWinSz | read-only | current | Specifies the size of the receive pacing window. This value is used for negotiation during session activations (SNA BIND). The meaning of this value when set t… |
| 1.3.6.1.2.1.34.3.1.2.5.1.11 | ColumnappcModeAdminSendPacWinSz | read-only | current | Specifies the size of the send pacing window. This value is used for negotiation during session activations (SNA BIND). The meaning of this value when set to 0… |
| 1.3.6.1.2.1.34.3.1.2.5.1.12 | ColumnappcModeAdminPrefRecvRuSz | read-only | current | Specifies the preferred receive RU (Request Unit) size of normal-flow requests on the sessions. This value must be less than or equal to the value specified in… |
| 1.3.6.1.2.1.34.3.1.2.5.1.13 | ColumnappcModeAdminPrefSendRuSz | read-only | current | Specifies the preferred send RU (Request Unit) size of normal- flow requests on the sessions. This value must be less than or equal to the value specified in a… |
| 1.3.6.1.2.1.34.3.1.2.5.1.14 | ColumnappcModeAdminRecvRuSzUpBnd | read-only | current | Specifies the upper bound for the maximum receive RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA … |
| 1.3.6.1.2.1.34.3.1.2.5.1.15 | ColumnappcModeAdminSendRuSzUpBnd | read-only | current | Specifies the upper bound for the maximum send RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA BIN… |
| 1.3.6.1.2.1.34.3.1.2.5.1.16 | ColumnappcModeAdminRecvRuSzLoBnd | read-only | current | Specifies the lower bound for the maximum receive RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA … |
| 1.3.6.1.2.1.34.3.1.2.5.1.17 | ColumnappcModeAdminSendRuSzLoBnd | read-only | current | Specifies the lower bound for the maximum send RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA BIN… |
| 1.3.6.1.2.1.34.3.1.2.5.1.18 | ColumnappcModeAdminSingSessReinit | read-only | current | Specifies the responsibility for session reinitiation of a single session with the partner LU (when the session goes down). The local LU uses this parameter to… |
| 1.3.6.1.2.1.34.3.1.2.5.1.19 | ColumnappcModeAdminCompression | read-only | current | Specifies whether compression is supported. The local LU uses this value for negotiation during session activation (SNA BIND). prohibited - specifies that no c… |
| 1.3.6.1.2.1.34.3.1.2.5.1.20 | ColumnappcModeAdminInBoundCompLevel | read-only | current | Specifies the maximum level of compression supported for inbound data. The local LU uses this value in conjunction with appcModeAdminCompression for negotiatio… |
| 1.3.6.1.2.1.34.3.1.2.5.1.21 | ColumnappcModeAdminOutBoundCompLevel | read-only | current | Specifies the maximum level of compression supported for outbound data. The local LU uses this value in conjunction with appcModeAdminCompression for negotiati… |
| 1.3.6.1.2.1.34.3.1.2.5.1.22 | ColumnappcModeAdminCompRleBeforeLZ | read-only | current | Specifies whether run-length encoding is to be applied to the data before applying Lempel-Ziv-like compression. The local LU uses this value for negotiation du… |
| 1.3.6.1.2.1.34.3.1.2.5.1.23 | ColumnappcModeAdminSyncLvl | read-only | current | Specifies the sync level support. This value is used for negotiation during session activations (SNA BIND). none - No sync level is supported. noneConfirm - No… |
| 1.3.6.1.2.1.34.3.1.2.5.1.24 | ColumnappcModeAdminCrypto | read-only | current | Specifies whether session-level cryptography is supported. This value is used for negotiation during session activations (SNA BIND). notSupported - Specifies s… |
| 1.3.6.1.2.1.34.3.1.2.6 | TableappcModeOperTable | not-accessible | current | Operational APPC Mode Information. Two entries are present in the table when both LUs in a pair are local. |
| 1.3.6.1.2.1.34.3.1.2.6.1 | RowappcModeOperEntry | not-accessible | current | Entry of APPC mode operational information table. This entry does not augment the appcModeAdminEntry, but reflects an actual operational mode for a given local… |
| 1.3.6.1.2.1.34.3.1.2.6.1.1 | ColumnappcModeOperLocLuName | not-accessible | current | The SNA name of the local LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId … |
| 1.3.6.1.2.1.34.3.1.2.6.1.2 | ColumnappcModeOperParLuName | not-accessible | current | The SNA name of the partner LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetI… |
| 1.3.6.1.2.1.34.3.1.2.6.1.3 | ColumnappcModeOperModeName | not-accessible | current | Specifies the mode name. A mode defines the characteristics for a group of sessions. The mode name can be blank (8 space characters). |
| 1.3.6.1.2.1.34.3.1.2.6.1.4 | ColumnappcModeOperCosName | read-only | current | Specifies the class of service (COS) name associated with this mode. If the implementation does not support COS names, a zero-length string is returned. |
| 1.3.6.1.2.1.34.3.1.2.6.1.5 | ColumnappcModeOperSessEndTpName | read-only | current | Specifies the name of the transaction program (TP) to be invoked when a session using this mode is deactivated or ended. If the name is NULL, no transaction pr… |
| 1.3.6.1.2.1.34.3.1.2.6.1.6 | ColumnappcModeOperSessLimit | read-only | current | Specifies the current session limit of this mode as negotiated through APPC CNOS (Change Number of Sessions) processing. Identifies the total number of session… |
| 1.3.6.1.2.1.34.3.1.2.6.1.7 | ColumnappcModeOperMaxSessLimit | read-only | current | Specifies the maximum value that the local LU is to use, during CNOS processing, for the session limit. The local LU, as a target LU, will negotiate a higher s… |
| 1.3.6.1.2.1.34.3.1.2.6.1.8 | ColumnappcModeOperMinCwinLimit | read-only | current | Specifies the minimum contention winner sessions limit that was negotiated via CNOS processing. |
| 1.3.6.1.2.1.34.3.1.2.6.1.9 | ColumnappcModeOperMinClosLimit | read-only | current | Specifies the minimum contention loser sessions limit that was negotiated via CNOS processing. This is the same as target minimum contention winner sessions. |
| 1.3.6.1.2.1.34.3.1.2.6.1.10 | ColumnappcModeOperConWinAutoActLmt | read-only | current | Specifies the limit on the number of contention winner sessions to be automatically activated when the minimum number of contention winner sessions increases (… |
| 1.3.6.1.2.1.34.3.1.2.6.1.11 | ColumnappcModeOperRecvPacWinSz | read-only | current | Specifies the size of the receive pacing window. This value is used for negotiation during session activations (SNA BIND). The meaning of this value when set t… |
| 1.3.6.1.2.1.34.3.1.2.6.1.12 | ColumnappcModeOperSendPacWinSz | read-only | current | Specifies the size of the send pacing window. This value is used for negotiation during session activations (SNA BIND). The meaning of this value when set to 0… |
| 1.3.6.1.2.1.34.3.1.2.6.1.13 | ColumnappcModeOperPrefRecvRuSz | read-only | current | Specifies the preferred receive RU (Request Unit) size of normal-flow requests on the sessions. This value must be less than or equal to the value specified in… |
| 1.3.6.1.2.1.34.3.1.2.6.1.14 | ColumnappcModeOperPrefSendRuSz | read-only | current | Specifies the preferred send RU (Request Unit) size of normal- flow requests on the sessions. This value must be less than or equal to the value specified in a… |
| 1.3.6.1.2.1.34.3.1.2.6.1.15 | ColumnappcModeOperRecvRuSzUpBnd | read-only | current | Specifies the upper bound for the maximum receive RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA … |
| 1.3.6.1.2.1.34.3.1.2.6.1.16 | ColumnappcModeOperSendRuSzUpBnd | read-only | current | Specifies the upper bound for the maximum send RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA BIN… |
| 1.3.6.1.2.1.34.3.1.2.6.1.17 | ColumnappcModeOperRecvRuSzLoBnd | read-only | current | Specifies the lower bound for the maximum receive RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA … |
| 1.3.6.1.2.1.34.3.1.2.6.1.18 | ColumnappcModeOperSendRuSzLoBnd | read-only | current | Specifies the lower bound for the maximum send RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA BIN… |
| 1.3.6.1.2.1.34.3.1.2.6.1.19 | ColumnappcModeOperSingSessReinit | read-only | current | Specifies the responsibility for session reinitiation of a single session with the partner LU (when the session goes down). The local LU uses this parameter to… |
| 1.3.6.1.2.1.34.3.1.2.6.1.20 | ColumnappcModeOperCompression | read-only | current | Specifies whether compression is supported. The local LU uses this value for negotiation during session activation (SNA BIND). prohibited - specifies that no c… |
| 1.3.6.1.2.1.34.3.1.2.6.1.21 | ColumnappcModeOperInBoundCompLevel | read-only | current | Specifies the maximum level of compression supported for inbound data. The local LU uses this value in conjunction with appcModeOperCompression for negotiation… |
| 1.3.6.1.2.1.34.3.1.2.6.1.22 | ColumnappcModeOperOutBoundCompLevel | read-only | current | Specifies the maximum level of compression supported for outbound data. The local LU uses this value in conjunction with appcModeOperCompression for negotiatio… |
| 1.3.6.1.2.1.34.3.1.2.6.1.23 | ColumnappcModeOperCompRleBeforeLZ | read-only | current | Specifies whether run-length encoding is to be applied to the data before applying Lempel-Ziv-like compression. The local LU uses this value for negotiation du… |
| 1.3.6.1.2.1.34.3.1.2.6.1.24 | ColumnappcModeOperSyncLvl | read-only | current | Specifies the sync level support for sessions involving this LU pair and mode name. none - No sync level is supported. noneConfirm - None and Confirm level sup… |
| 1.3.6.1.2.1.34.3.1.2.6.1.25 | ColumnappcModeOperCrypto | read-only | current | Specifies whether session-level cryptography is supported for sessions involving this LU pair and mode name. notSupported - Specifies session-level cryptograph… |
| 1.3.6.1.2.1.34.3.1.2.6.1.26 | ColumnappcModeOperSyncLvlLastStart | read-only | current | Specifies the sync level support. This value represents the initial value proposed by the local LU the last time this capability was negotiated, i.e., when the… |
| 1.3.6.1.2.1.34.3.1.2.6.1.27 | ColumnappcModeOperCryptoLastStart | read-only | current | Specifies whether session-level cryptography is supported. This value represents the initial value proposed by the local LU the last time this capability was n… |
| 1.3.6.1.2.1.34.3.1.2.6.1.28 | ColumnappcModeOperCNOSNeg | read-only | current | Specifies whether CNOS negotiation is in process. CNOS negotiation is used to set or change the various session limits for a mode. |
| 1.3.6.1.2.1.34.3.1.2.6.1.29 | ColumnappcModeOperActCwin | read-only | current | Specifies the number of active contention winner sessions. |
| 1.3.6.1.2.1.34.3.1.2.6.1.30 | ColumnappcModeOperActClos | read-only | current | Specifies the number of active contention loser sessions. |
| 1.3.6.1.2.1.34.3.1.2.6.1.31 | ColumnappcModeOperPndCwin | read-only | current | Specifies the number of contention winner sessions that are pending activation. |
| 1.3.6.1.2.1.34.3.1.2.6.1.32 | ColumnappcModeOperPndClos | read-only | current | Specifies the number of contention loser sessions that are pending activation. |
| 1.3.6.1.2.1.34.3.1.2.6.1.33 | ColumnappcModeOperPtmCwin | read-only | current | Specifies the number of contention winner sessions that are pending termination. |
| 1.3.6.1.2.1.34.3.1.2.6.1.34 | ColumnappcModeOperPtmClos | read-only | current | Specifies the number of contention loser sessions that are pending termination. |
| 1.3.6.1.2.1.34.3.1.2.6.1.35 | ColumnappcModeOperDrainSelf | read-only | current | Specifies whether the local LU is draining its conversations for this mode. When a mode session limit is reset (via a CNOS RESET_SESSION_LIMIT request), the lo… |
| 1.3.6.1.2.1.34.3.1.2.6.1.36 | ColumnappcModeOperDrainPart | read-only | current | Specifies whether the partner LU is draining its conversations for this mode. When a mode session limit is reset (via a CNOS RESET_SESSION_LIMIT request), the … |
| 1.3.6.1.2.1.34.3.1.3 | NodeappcTp | |||
| 1.3.6.1.2.1.34.3.1.3.1 | TableappcTpAdminTable | not-accessible | current | APPC Local TP Table |
| 1.3.6.1.2.1.34.3.1.3.1.1 | RowappcTpAdminEntry | not-accessible | current | Entry of APPC Local TP Information Table. |
| 1.3.6.1.2.1.34.3.1.3.1.1.1 | ColumnappcTpAdminLocLuName | not-accessible | current | The SNA name of the local LU to which this TP definition applies. This field is from 1 to 17 characters in length, including a period (.) which separates the N… |
| 1.3.6.1.2.1.34.3.1.3.1.1.2 | ColumnappcTpAdminTpName | not-accessible | current | The local transaction program name. This name is sent on an ATTACH remote allocation request. When the TP name consists entirely of displayable EBCDIC code poi… |
| 1.3.6.1.2.1.34.3.1.3.1.1.3 | ColumnappcTpAdminFileSpec | read-only | current | The local file specification of the transaction program. May be a zero-length string if not applicable. |
| 1.3.6.1.2.1.34.3.1.3.1.1.4 | ColumnappcTpAdminStartParm | read-only | current | A parameter string passed to the transaction program when it is started. May be a zero-length string if not supported. |
| 1.3.6.1.2.1.34.3.1.3.1.1.5 | ColumnappcTpAdminTpOperation | read-only | current | Specifies how the program will be started. other - Specifies that the program operation is none of the methods specified. It may be a product-specific method. … |
| 1.3.6.1.2.1.34.3.1.3.1.1.6 | ColumnappcTpAdminInAttachTimeout | read-only | current | This object specifies the number of seconds incoming attaches will be queued waiting for an APPC program to issue a RECEIVE_ALLOCATE verb or for a CPI-C progra… |
| 1.3.6.1.2.1.34.3.1.3.1.1.7 | ColumnappcTpAdminRcvAllocTimeout | read-only | current | This object specifies the number of seconds an APPC program's RECEIVE_ALLOCATE verb or a CPI-C program's Accept_Conversation (CMACCP) call will wait for an inc… |
| 1.3.6.1.2.1.34.3.1.3.1.1.8 | ColumnappcTpAdminSyncLvl | read-only | current | Indicates the synchronization level or levels that the transaction program supports. The levels are defined as follows: none - allocation requests indicating a… |
| 1.3.6.1.2.1.34.3.1.3.1.1.9 | ColumnappcTpAdminInstLmt | read-only | current | The maximum number of concurrent instances of this transaction program that will be supported for a local LU. A value of zero indicates that there is no limit. |
| 1.3.6.1.2.1.34.3.1.3.1.1.10 | ColumnappcTpAdminStatus | read-only | current | Indicates the status of the TP relative to starting execution when the local LU receives an allocation (ATTACH) request naming this program. enabled - the loca… |
| 1.3.6.1.2.1.34.3.1.3.1.1.11 | ColumnappcTpAdminLongRun | read-only | current | Indicates whether this is a long-running transaction program (i.e., one that stays around even after the conversation goes away). |
| 1.3.6.1.2.1.34.3.1.3.1.1.12 | ColumnappcTpAdminConvType | read-only | current | Specifies the conversation type (basic or mapped) that will be used by the TP. This value is verified upon receipt of an incoming attach. The acceptable values… |
| 1.3.6.1.2.1.34.3.1.3.1.1.13 | ColumnappcTpAdminConvDuplex | read-only | current | Specifies the conversation duplex type (half or full) that will be used by the TP. This value is verified upon receipt of an incoming attach. The acceptable va… |
| 1.3.6.1.2.1.34.3.1.3.1.1.14 | ColumnappcTpAdminConvSecReq | read-only | current | Indicates whether conversation-level security information is required on incoming attaches designating this TP name. Conversation-level security verification i… |
| 1.3.6.1.2.1.34.3.1.3.1.1.15 | ColumnappcTpAdminVerPip | read-only | current | Specifies whether the number of PIP (Program Initialization Parameters) subfields should be verified against the number expected (appcTpAdminPipSubNum). |
| 1.3.6.1.2.1.34.3.1.3.1.1.16 | ColumnappcTpAdminPipSubNum | read-only | current | Specifies the number of PIP subfields expected by the TP. |
| 1.3.6.1.2.1.34.3.1.4 | NodeappcSession | |||
| 1.3.6.1.2.1.34.3.1.4.1 | TableappcActSessTable | not-accessible | current | Table of active APPC sessions. Two entries are present in the table when both session partners are local. |
| 1.3.6.1.2.1.34.3.1.4.1.1 | RowappcActSessEntry | not-accessible | current | Entry of APPC Session Information Table. Indexed by LU pair and integer-valued session index. |
| 1.3.6.1.2.1.34.3.1.4.1.1.1 | ColumnappcActSessLocLuName | not-accessible | current | Specifies the name of the local LU for the session. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the … |
| 1.3.6.1.2.1.34.3.1.4.1.1.2 | ColumnappcActSessParLuName | not-accessible | current | Specifies the name of the partner LU for the session. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from th… |
| 1.3.6.1.2.1.34.3.1.4.1.1.3 | ColumnappcActSessIndex | not-accessible | current | This value identifies the index of the session, which is unique for this LU pair. It is recommended that an Agent not reuse the index of a deactivated session … |
| 1.3.6.1.2.1.34.3.1.4.1.1.4 | ColumnappcActSessPcidCpName | read-only | current | The network-qualified CP name of the node at which the session and PCID originated. For APPN and LEN nodes, this is either CP name of the APPN node at which th… |
| 1.3.6.1.2.1.34.3.1.4.1.1.5 | ColumnappcActSessPcid | read-only | current | The procedure correlation identifier (PCID) of a session. It is an 8-octet value assigned by the control point providing session services for the primary LU. A… |
| 1.3.6.1.2.1.34.3.1.4.1.1.6 | ColumnappcActSessPluIndicator | read-only | current | Indicates which LU is the PLU for this session. For independent LUs, the PLU (primary LU) is the one that initiated the session (sent BIND), while the SLU (sec… |
| 1.3.6.1.2.1.34.3.1.4.1.1.7 | ColumnappcActSessModeName | read-only | current | The mode name used for this session. |
| 1.3.6.1.2.1.34.3.1.4.1.1.8 | ColumnappcActSessCosName | read-only | current | The Class of Service (COS) name used for this session. A null string indicates that the value is unknown. |
| 1.3.6.1.2.1.34.3.1.4.1.1.9 | ColumnappcActSessTransPriority | read-only | current | The transmission priority of this session. 1 = unknown priority 2 = low priority 3 = medium priority 4 = high priority 5 = network priority |
| 1.3.6.1.2.1.34.3.1.4.1.1.10 | ColumnappcActSessEnhanceSecSup | read-only | current | Enhanced security supported. Indicates the level of enhanced security support: 1 = none 2 = level 1 3 = level 2 |
| 1.3.6.1.2.1.34.3.1.4.1.1.11 | ColumnappcActSessSendPacingType | read-only | current | The type of pacing being used for sending data. |
| 1.3.6.1.2.1.34.3.1.4.1.1.12 | ColumnappcActSessSendRpc | read-only | current | The send residual pace count. This represents the number of MUs that can still be sent in the current session window. |
| 1.3.6.1.2.1.34.3.1.4.1.1.13 | ColumnappcActSessSendNxWndwSize | read-only | current | The size of the next window which will be used to send data. |
| 1.3.6.1.2.1.34.3.1.4.1.1.14 | ColumnappcActSessRecvPacingType | read-only | current | The type of pacing being used for receiving data. |
| 1.3.6.1.2.1.34.3.1.4.1.1.15 | ColumnappcActSessRecvRpc | read-only | current | The receive residual pace count. This represents the number of MUs that can still be received in the current session window. |
| 1.3.6.1.2.1.34.3.1.4.1.1.16 | ColumnappcActSessRecvNxWndwSize | read-only | current | The size of the next window which will be used to receive data. |
| 1.3.6.1.2.1.34.3.1.4.1.1.17 | ColumnappcActSessRscv | read-only | current | The route selection control vector (RSCV CV2B) used for this session. It is present for APPN-level implementations. LEN-level implementations will return a nul… |
| 1.3.6.1.2.1.34.3.1.4.1.1.18 | ColumnappcActSessInUse | read-only | current | Specifies whether the session is currently in use (i.e., in bracket with a conversation). |
| 1.3.6.1.2.1.34.3.1.4.1.1.19 | ColumnappcActSessMaxSndRuSize | read-only | current | The maximum RU size used on this session for sending RUs. |
| 1.3.6.1.2.1.34.3.1.4.1.1.20 | ColumnappcActSessMaxRcvRuSize | read-only | current | The maximum RU size used on this session for receiving RUs. |
| 1.3.6.1.2.1.34.3.1.4.1.1.21 | ColumnappcActSessSndPacingSize | read-only | current | The size of the send pacing window on this session. |
| 1.3.6.1.2.1.34.3.1.4.1.1.22 | ColumnappcActSessRcvPacingSize | read-only | current | The size of the receive pacing window on this session. |
| 1.3.6.1.2.1.34.3.1.4.1.1.23 | ColumnappcActSessOperState | read-write | current | The value indicates the current operational state of the session. 'unbound (1)' - session has been unbound; in this state it will be removed from the session t… |
| 1.3.6.1.2.1.34.3.1.4.1.1.24 | ColumnappcActSessUpTime | read-only | current | The length of time the session has been active, measured in hundredths of a second. |
| 1.3.6.1.2.1.34.3.1.4.1.1.25 | ColumnappcActSessRtpNceId | read-only | current | The local HPR Network Connection Endpoint of the session. |
| 1.3.6.1.2.1.34.3.1.4.1.1.26 | ColumnappcActSessRtpTcid | read-only | current | The local RTP connection TCID of the session. |
| 1.3.6.1.2.1.34.3.1.4.1.1.27 | ColumnappcActSessLinkIndex | read-only | current | This value identifies the link over which the session passes. This value points to the row in the table containing information on the link instance. (e.g., the… |
| 1.3.6.1.2.1.34.3.1.4.2 | TableappcSessStatsTable | not-accessible | current | This table contains dynamic statistical information relating to active APPC sessions. The entries in this table cannot be created by a Management Station. Two … |
| 1.3.6.1.2.1.34.3.1.4.2.1 | RowappcSessStatsEntry | not-accessible | current | Contains statistics information for an APPC session. Each entry is created by the Agent. Objects in this table have read-only access. Each session from appcAct… |
| 1.3.6.1.2.1.34.3.1.4.2.1.1 | ColumnappcSessStatsLocLuName | not-accessible | current | Specifies the name of the local LU for the session. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the … |
| 1.3.6.1.2.1.34.3.1.4.2.1.2 | ColumnappcSessStatsParLuName | not-accessible | current | Specifies the name of the partner LU for the session. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from th… |
| 1.3.6.1.2.1.34.3.1.4.2.1.3 | ColumnappcSessStatsSessIndex | not-accessible | current | This value identifies the index of the session, which is unique for this LU pair. It is recommended that an Agent not reuse the index of a deactivated session … |
| 1.3.6.1.2.1.34.3.1.4.2.1.4 | ColumnappcSessStatsSentFmdBytes | read-only | current | The number of function management data (FMD) bytes sent by the local LU. |
| 1.3.6.1.2.1.34.3.1.4.2.1.5 | ColumnappcSessStatsSentNonFmdBytes | read-only | current | The number of non-function management data (non-FMD) bytes sent by the local LU. |
| 1.3.6.1.2.1.34.3.1.4.2.1.6 | ColumnappcSessStatsRcvdFmdBytes | read-only | current | The number of function management data (FMD) bytes received by the local LU. |
| 1.3.6.1.2.1.34.3.1.4.2.1.7 | ColumnappcSessStatsRcvdNonFmdBytes | read-only | current | The number of non-function management data (non-FMD) bytes received by the local LU. |
| 1.3.6.1.2.1.34.3.1.4.2.1.8 | ColumnappcSessStatsSentFmdRus | read-only | current | The number of function management data (FMD) RUs sent by the local LU. |
| 1.3.6.1.2.1.34.3.1.4.2.1.9 | ColumnappcSessStatsSentNonFmdRus | read-only | current | The number of non-function management data (non-FMD) RUs sent by the local LU. |
| 1.3.6.1.2.1.34.3.1.4.2.1.10 | ColumnappcSessStatsRcvdFmdRus | read-only | current | The number of function management data (FMD) RUs received by the local LU. |
| 1.3.6.1.2.1.34.3.1.4.2.1.11 | ColumnappcSessStatsRcvdNonFmdRus | read-only | current | The number of non-function management data (non-FMD) RUs received by the local LU. |
| 1.3.6.1.2.1.34.3.1.4.2.1.12 | ColumnappcSessStatsCtrUpTime | read-only | current | The length of time the counters for this session have been active, measured in hundredths of a second. |
| 1.3.6.1.2.1.34.3.1.4.3 | TableappcHistSessTable | not-accessible | current | Table of historical information about APPC sessions that terminated abnormally. Two entries may be present in the table when both session partners are local. I… |
| 1.3.6.1.2.1.34.3.1.4.3.1 | RowappcHistSessEntry | not-accessible | current | Entry of APPC Session History Table. This table is indexed by an integer which is continuously incremented until it eventually wraps. |
| 1.3.6.1.2.1.34.3.1.4.3.1.1 | ColumnappcHistSessIndex | not-accessible | current | Table index. The value of the index begins at zero and is incremented up to a maximum value of 2**31-1 (2,147,483,647) before wrapping. |
| 1.3.6.1.2.1.34.3.1.4.3.1.2 | ColumnappcHistSessTime | read-only | current | The time at which the session was either terminated or failed to be established. |
| 1.3.6.1.2.1.34.3.1.4.3.1.3 | ColumnappcHistSessType | read-only | current | Indicates the type of event that caused the entry to be made: recvNegBindRsp - Received a negative bind response from the partner LU. sendNegBindRsp - Sent a n… |
| 1.3.6.1.2.1.34.3.1.4.3.1.4 | ColumnappcHistSessLocLuName | read-only | current | The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the… |
| 1.3.6.1.2.1.34.3.1.4.3.1.5 | ColumnappcHistSessParLuName | read-only | current | The network-qualified partner LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if t… |
| 1.3.6.1.2.1.34.3.1.4.3.1.6 | ColumnappcHistSessModeName | read-only | current | The mode name of the session. |
| 1.3.6.1.2.1.34.3.1.4.3.1.7 | ColumnappcHistSessUnbindType | read-only | current | The type of unbind which terminated the session. This value is consists of one (1) octet; and its meaning is defined in SNA Formats. |
| 1.3.6.1.2.1.34.3.1.4.3.1.8 | ColumnappcHistSessSenseData | read-only | current | The sense data associated with the termination of the session, taken from the negative BIND response or UNBIND request. |
| 1.3.6.1.2.1.34.3.1.4.3.1.9 | ColumnappcHistSessComponentId | read-only | current | The implementation-specific name of the component which detected the problem. |
| 1.3.6.1.2.1.34.3.1.4.3.1.10 | ColumnappcHistSessDetectModule | read-only | current | The implementation-specific name of the module which detected the problem. |
| 1.3.6.1.2.1.34.3.1.4.4 | TableappcSessRtpTable | not-accessible | current | A table indicating how many APPC sessions terminating in this node are transported by each RTP connection. |
| 1.3.6.1.2.1.34.3.1.4.4.1 | RowappcSessRtpEntry | not-accessible | current | Entry of APPC session RTP table. |
| 1.3.6.1.2.1.34.3.1.4.4.1.1 | ColumnappcSessRtpNceId | not-accessible | current | The local Network Connection Endpoint of the RTP connection. |
| 1.3.6.1.2.1.34.3.1.4.4.1.2 | ColumnappcSessRtpTcid | not-accessible | current | The local TCID of the RTP connection. |
| 1.3.6.1.2.1.34.3.1.4.4.1.3 | ColumnappcSessRtpSessions | read-only | current | The number of APPC sessions terminating in this node that are using this RTP connection. |
| 1.3.6.1.2.1.34.3.1.5 | NodeappcConversation | |||
| 1.3.6.1.2.1.34.3.1.5.1 | TableappcActiveConvTable | not-accessible | current | Table of information about active APPC Conversations. In this context 'active' means that a conversation is currently associated with a particular session. Two… |
| 1.3.6.1.2.1.34.3.1.5.1.1 | RowappcActiveConvEntry | not-accessible | current | Entry representing one active APPC Conversation. |
| 1.3.6.1.2.1.34.3.1.5.1.1.1 | ColumnappcActiveConvLocLuName | not-accessible | current | The SNA name of the local LU for the conversation. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the N… |
| 1.3.6.1.2.1.34.3.1.5.1.1.2 | ColumnappcActiveConvParLuName | not-accessible | current | The SNA name of the partner LU for the conversation. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the… |
| 1.3.6.1.2.1.34.3.1.5.1.1.3 | ColumnappcActiveConvSessIndex | not-accessible | current | Index of entry in appcActSessTable that is associated with this conversation. If this object has the same value as appcActSessIndex for the same LU pair, then … |
| 1.3.6.1.2.1.34.3.1.5.1.1.4 | ColumnappcActiveConvId | read-only | current | The 4-byte ID of the conversation. |
| 1.3.6.1.2.1.34.3.1.5.1.1.5 | ColumnappcActiveConvState | read-only | current | Indicates the state of the conversation at the instant when the information was retrieved. The values are: reset The conversation is reset (i.e., deallocated).… |
| 1.3.6.1.2.1.34.3.1.5.1.1.6 | ColumnappcActiveConvType | read-only | current | Indicates the type of conversation. The values are: basic Indicates that this conversation supports basic verbs. mapped Indicates that this conversation suppor… |
| 1.3.6.1.2.1.34.3.1.5.1.1.7 | ColumnappcActiveConvCorrelator | read-only | current | This is an 8-byte identifier that the source LU assigns to the conversation; the source LU is the one that sent the allocation request. The conversation correl… |
| 1.3.6.1.2.1.34.3.1.5.1.1.8 | ColumnappcActiveConvSyncLvl | read-only | current | Indicates the highest sync level support for the conversation. The values are: none Indicates that no sync-level processing can be performed on this conversati… |
| 1.3.6.1.2.1.34.3.1.5.1.1.9 | ColumnappcActiveConvSource | read-only | current | Indicates whether the local or partner LU is the source of the conversation, that is, which LU started the conversation by sending the allocation request. loca… |
| 1.3.6.1.2.1.34.3.1.5.1.1.10 | ColumnappcActiveConvDuplex | read-only | current | Indicates the conversation duplex style in effect for the conversation. half Indicates that information can be transferred in both directions, but only in one … |
| 1.3.6.1.2.1.34.3.1.5.1.1.11 | ColumnappcActiveConvUpTime | read-only | current | The length of time since the conversation started, measured in hundredths of a second. |
| 1.3.6.1.2.1.34.3.1.5.1.1.12 | ColumnappcActiveConvSendBytes | read-only | current | Indicates the number of bytes that was sent on the conversation. The count includes all SNA RU bytes sent, including those in the FMH-5 (Attach), FMH-7 (Error … |
| 1.3.6.1.2.1.34.3.1.5.1.1.13 | ColumnappcActiveConvRcvBytes | read-only | current | Indicates the number of bytes that was received on the conversation. The count includes all SNA RU bytes sent, including those in the FMH-5 (Attach), FMH-7 (Er… |
| 1.3.6.1.2.1.34.3.1.5.1.1.14 | ColumnappcActiveConvUserid | read-only | current | The user ID that the initiating program provided in the incoming attach. |
| 1.3.6.1.2.1.34.3.1.5.1.1.15 | ColumnappcActiveConvPcidNauName | read-only | current | The network-qualified NAU name of the node at which the session and PCID originated. For APPN and LEN nodes, this is either CP name of the APPN node at which t… |
| 1.3.6.1.2.1.34.3.1.5.1.1.16 | ColumnappcActiveConvPcid | read-only | current | The procedure correlation identifier (PCID) of the session. It is an 8-octet value assigned by the control point providing session services for the primary LU.… |
| 1.3.6.1.2.1.34.3.1.5.1.1.17 | ColumnappcActiveConvModeName | read-only | current | The Mode Name used for this conversation. This is a 1-8 character name. |
| 1.3.6.1.2.1.34.3.1.5.1.1.18 | ColumnappcActiveConvLuwIdName | read-only | current | The SNA name of the LU that initiated the logical unit of work that is associated with this active TP. This field is from 1 to 17 characters in length, includi… |
| 1.3.6.1.2.1.34.3.1.5.1.1.19 | ColumnappcActiveConvLuwIdInstance | read-only | current | The instance identifier for the logical unit of work. |
| 1.3.6.1.2.1.34.3.1.5.1.1.20 | ColumnappcActiveConvLuwIdSequence | read-only | current | The sequence identifier for the logical unit of work. |
| 1.3.6.1.2.1.34.3.1.5.1.1.21 | ColumnappcActiveConvTpName | read-only | current | The transaction program name which started this conversation. This name could either be from a FMH5 ATTACH for a remotely started conversation, otherwise it co… |
| 1.3.6.1.2.1.34.3.1.5.2 | TableappcHistConvTable | not-accessible | current | Table of historical information about APPC Conversations that ended in error. Possible categories of error conditions that could be saved in this table are: - … |
| 1.3.6.1.2.1.34.3.1.5.2.1 | RowappcHistConvEntry | not-accessible | current | Entry representing one APPC Conversation. |
| 1.3.6.1.2.1.34.3.1.5.2.1.1 | ColumnappcHistConvIndex | not-accessible | current | Index for entry in Conversation table. This value identifies the unique index of the conversation. It is recommended that an Agent not reuse the index of a dea… |
| 1.3.6.1.2.1.34.3.1.5.2.1.2 | ColumnappcHistConvEndTime | read-only | current | The time at which the conversation ended. |
| 1.3.6.1.2.1.34.3.1.5.2.1.3 | ColumnappcHistConvLocLuName | read-only | current | The name of the local LU for this conversation. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU … |
| 1.3.6.1.2.1.34.3.1.5.2.1.4 | ColumnappcHistConvParLuName | read-only | current | The SNA name of the partner LU for the conversation. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the… |
| 1.3.6.1.2.1.34.3.1.5.2.1.5 | ColumnappcHistConvTpName | read-only | current | The transaction program name which started this conversation. This name could either be from a FMH5 ATTACH for a remotely started conversation, otherwise it co… |
| 1.3.6.1.2.1.34.3.1.5.2.1.6 | ColumnappcHistConvPcidNauName | read-only | current | The network-qualified NAU name of the node at which the session and PCID originated. For APPN and LEN nodes, this is either CP name of the APPN node at which t… |
| 1.3.6.1.2.1.34.3.1.5.2.1.7 | ColumnappcHistConvPcid | read-only | current | The procedure correlation identifier (PCID) of the session. It is an 8-octet value assigned by the control point providing session services for the primary LU.… |
| 1.3.6.1.2.1.34.3.1.5.2.1.8 | ColumnappcHistConvSenseData | read-only | current | The sense data associated with the action that ended this conversation, e.g., FMH-7 or UNBIND. |
| 1.3.6.1.2.1.34.3.1.5.2.1.9 | ColumnappcHistConvLogData | read-only | current | The first 32 bytes of the data portion of the Log Data GDS Variable that is associated with the last FMH-7 that occurred on this conversation. If there was no … |
| 1.3.6.1.2.1.34.3.1.5.2.1.10 | ColumnappcHistConvEndedBy | read-only | current | Indicates which LU ended the conversation. |
| 1.3.6.1.2.1.34.3.1.6 | NodeappcCPIC | |||
| 1.3.6.1.2.1.34.3.1.6.1 | TableappcCpicAdminTable | not-accessible | current | APPC CPI-C side information table. |
| 1.3.6.1.2.1.34.3.1.6.1.1 | RowappcCpicAdminEntry | not-accessible | current | Entry of APPC CPI-C side information Table. |
| 1.3.6.1.2.1.34.3.1.6.1.1.1 | ColumnappcCpicAdminLocLuName | not-accessible | current | The SNA name of the local LU to which this CPI-C side information definition applies. This field is from 1 to 17 characters in length, including a period (.) w… |
| 1.3.6.1.2.1.34.3.1.6.1.1.2 | ColumnappcCpicAdminSymbDestName | not-accessible | current | Specifies the symbolic destination name used by CPI-C applications to identify this definition. |
| 1.3.6.1.2.1.34.3.1.6.1.1.3 | ColumnappcCpicAdminParLuAlias | read-only | current | A local alias for the partner LU. If not known or not applicable, this object contains a zero-length string. |
| 1.3.6.1.2.1.34.3.1.6.1.1.4 | ColumnappcCpicAdminParLuName | read-only | current | The SNA name of the partner LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetI… |
| 1.3.6.1.2.1.34.3.1.6.1.1.5 | ColumnappcCpicAdminModeName | read-only | current | Specifies the mode name. A mode defines the characteristics for a group of sessions. The mode name can be blank (8 space characters). |
| 1.3.6.1.2.1.34.3.1.6.1.1.6 | ColumnappcCpicAdminTpNameType | read-only | current | Specifies whether the TP name in appcCpicAdminTpName identifies a normal TP or an SNA service TP. In this context, a normal TP is one with a name consisting on… |
| 1.3.6.1.2.1.34.3.1.6.1.1.7 | ColumnappcCpicAdminTpName | read-only | current | Specifies the name of the partner TP to be used when a CPI-C application initiates a conversation specifying this side information entry. Display convention Wh… |
| 1.3.6.1.2.1.34.3.1.6.1.1.8 | ColumnappcCpicAdminUserid | read-only | current | The security userid, if any, associated with the side information definition. |
| 1.3.6.1.2.1.34.3.1.6.1.1.9 | ColumnappcCpicAdminSecurity | read-only | current | Specifies the security information to be used for allocating the conversation. none - No security information. same - Use the security environment currently as… |
| 1.3.6.1.2.1.34.3.1.6.2 | TableappcCpicOperTable | not-accessible | current | APPC CPI-C side information operational table. |
| 1.3.6.1.2.1.34.3.1.6.2.1 | RowappcCpicOperEntry | not-accessible | current | Entry of APPC CPI-C side information Table. |
| 1.3.6.1.2.1.34.3.1.6.2.1.1 | ColumnappcCpicOperLocLuName | not-accessible | current | The SNA name of the local LU to which this CPI-C side information definition applies. This field is from 1 to 17 characters in length, including a period (.) w… |
| 1.3.6.1.2.1.34.3.1.6.2.1.2 | ColumnappcCpicOperSymbDestName | not-accessible | current | Specifies the symbolic destination name used by CPI-C applications to identify this definition. |
| 1.3.6.1.2.1.34.3.1.6.2.1.3 | ColumnappcCpicOperParLuAlias | read-only | current | A local alias for the partner LU. If not known or not applicable, this object contains a zero-length string. |
| 1.3.6.1.2.1.34.3.1.6.2.1.4 | ColumnappcCpicOperParLuName | read-only | current | The SNA name of the partner LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetI… |
| 1.3.6.1.2.1.34.3.1.6.2.1.5 | ColumnappcCpicOperModeName | read-only | current | Specifies the mode name. A mode defines the characteristics for a group of sessions. The mode name can be blank (8 space characters). |
| 1.3.6.1.2.1.34.3.1.6.2.1.6 | ColumnappcCpicOperTpNameType | read-only | current | Specifies whether the TP name in appcCpicOperTpName identifies a normal TP or an SNA service TP. In this context, a normal TP is one with a name consisting onl… |
| 1.3.6.1.2.1.34.3.1.6.2.1.7 | ColumnappcCpicOperTpName | read-only | current | Specifies the name of the partner TP to be used when a CPI-C application initiates a conversation specifying this side information entry. Display convention Wh… |
| 1.3.6.1.2.1.34.3.1.6.2.1.8 | ColumnappcCpicOperUserid | read-only | current | The security userid, if any, associated with the active side information definition. |
| 1.3.6.1.2.1.34.3.1.6.2.1.9 | ColumnappcCpicOperSecurity | read-only | current | Specifies the security information to be used for allocating the conversation. none - No security information. same - Use the security environment currently as… |
| 1.3.6.1.2.1.34.3.2 | NodeappcConformance | |||
| 1.3.6.1.2.1.34.3.2.1 | NodeappcCompliances | |||
| 1.3.6.1.2.1.34.3.2.1.1 | ComplianceappcCompliance | read-only | current | The compliance statement for the SNMPv2 entities which implement the APPC MIB. |
| 1.3.6.1.2.1.34.3.2.2 | NodeappcGroups | |||
| 1.3.6.1.2.1.34.3.2.2.1 | GroupappcGlobalConfGroup | current | A collection of objects providing the instrumentation of APPC global information and defaults. | |
| 1.3.6.1.2.1.34.3.2.2.2 | GroupappcLluConfGroup | current | A collection of objects providing the instrumentation of APPC local LU6.2s. | |
| 1.3.6.1.2.1.34.3.2.2.3 | GroupappcParLuConfGroup | current | A collection of objects providing the instrumentation of APPC partner LUs. | |
| 1.3.6.1.2.1.34.3.2.2.4 | GroupappcModeConfGroup | current | A collection of objects providing the instrumentation of APPC modes. | |
| 1.3.6.1.2.1.34.3.2.2.5 | GroupappcTpConfGroup | current | A collection of objects providing the instrumentation of APPC Transaction Programs. | |
| 1.3.6.1.2.1.34.3.2.2.6 | GroupappcSessionConfGroup | current | A collection of objects providing the instrumentation of APPC LU6.2 sessions. | |
| 1.3.6.1.2.1.34.3.2.2.7 | GroupappcControlConfGroup | current | A collection of objects providing the instrumentation of APPC control. | |
| 1.3.6.1.2.1.34.3.2.2.8 | GroupappcCnosConfGroup | current | A collection of objects providing the instrumentation of APPC CNOS processing. | |
| 1.3.6.1.2.1.34.3.2.2.9 | GroupappcCpicConfGroup | current | A collection of objects providing the instrumentation of APPC CPI-C side information. | |
| 1.3.6.1.2.1.34.3.2.2.10 | GroupappcConversationConfGroup | current | A collection of objects providing the instrumentation of APPC conversations. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SnaSenseData | DisplayString (SIZE (8)) | current | To facilitate their display by a Management Station, sense data objects in the MIB are represented as DisplayStrings of size 8. Eight '0' characters indicates that no sense data identifying an SNA error condition is ava… |