ARICENT-DCB-MIB
189 objects
The proprietary extension MIB module for DCB.
Imported Objects
| IF-MIB | InterfaceIndex |
| LLDP-EXT-DOT1-DCBX-MIB | lldpXdot1dcbxAdminApplicationPriorityAppEntry |
| LLDP-V2-MIB | lldpV2LocPortIfIndex lldpV2PortConfigEntry lldpV2RemIndex lldpV2RemLocalDestMACAddress lldpV2RemLocalIfIndex lldpV2RemTimeMark |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.22 | IdentityfsDcbMIB | The proprietary extension MIB module for DCB. | ||
| 1.3.6.1.4.1.29601.2.22.1 | NodefsDcbSystem | |||
| 1.3.6.1.4.1.29601.2.22.1.1 | ScalarfsDcbPfcMinThreshold | read-write | current | The minimum PFC(Priority Based Flow Control) threshold for the switch. This Object indicates the minimum Receive queue buffer count. The minimum and maximum va… |
| 1.3.6.1.4.1.29601.2.22.1.2 | ScalarfsDcbPfcMaxThreshold | read-write | current | The maximum PFC(Priority Based Flow Control)threshold for the switch. This Object indicates the maximum Receive queue buffer count. The minimum and maximum val… |
| 1.3.6.1.4.1.29601.2.22.1.3 | ScalarfsDcbMaxPfcProfiles | read-only | current | The maximum number of PFC(Priority Based Flow Control)profiles supported by the device. A PFC profile is a bitmap, containing the status of PFC for all the pri… |
| 1.3.6.1.4.1.29601.2.22.2 | NodefsDcbObjects | |||
| 1.3.6.1.4.1.29601.2.22.2.1 | TablefsDcbPortTable | not-accessible | current | Port table contains the DCB features (Enhanced Transmission Selection/Priortiy Based Flow Control/Application priority) status (enabled or disabled) and DCBX v… |
| 1.3.6.1.4.1.29601.2.22.2.1.1 | RowfsDcbPortEntry | not-accessible | current | An entry containing DCB control parameters for a particular port. |
| 1.3.6.1.4.1.29601.2.22.2.1.1.1 | ColumnfsDcbPortNumber | not-accessible | current | This indicates the interface identifier for which the Dcb configuration is applied. |
| 1.3.6.1.4.1.29601.2.22.2.1.1.2 | ColumnfsDcbETSAdminStatus | read-only | current | This object enables or disables ETS feature on the given port. If set to 'enabled(1)', ETS feature will be enabled on this port. If set to 'disabled(2)', ETS f… |
| 1.3.6.1.4.1.29601.2.22.2.1.1.3 | ColumnfsDcbPFCAdminStatus | read-only | current | This object enables or disables PFC feature on the given port. If set to 'enabled(1)', PFC feature will be enabled on this port. If set to 'disabled(2)', PFC f… |
| 1.3.6.1.4.1.29601.2.22.2.1.1.4 | ColumnfsDcbRowStatus | read-write | current | This object is used to create and delete a row in this table. Only 'createAndGo', and 'destroy' values are allowed for this object. 'createAndWait' and 'notInS… |
| 1.3.6.1.4.1.29601.2.22.2.1.1.5 | ColumnfsDcbAppPriAdminStatus | read-only | current | This object enables or disables PFC feature on the given port. If set to 'enabled(1)', Application priority feature will be enabled on this port. If set to 'di… |
| 1.3.6.1.4.1.29601.2.22.2.1.1.6 | ColumnfsDcbOperVersion | read-only | current | This object specifies the Operating version of the DCBX protocol in which the system adjusts as needed to operate at the highest version supported by both link… |
| 1.3.6.1.4.1.29601.2.22.2.1.1.7 | ColumnfsDcbMaxVersion | read-only | current | This object specifies the Highest DCBX protocol version supported by the local system. |
| 1.3.6.1.4.1.29601.2.22.2.1.1.8 | ColumnfsDcbPeerOperVersion | read-only | current | This object specifies the Operating version of the DCBX protocol for peer in which the system adjusts as needed to operate at the highest version supported by … |
| 1.3.6.1.4.1.29601.2.22.2.1.1.9 | ColumnfsDcbPeerMaxVersion | read-only | current | This object specifies the Highest DCBX protocol version supported by the peer system. |
| 1.3.6.1.4.1.29601.2.22.3 | NodefsDcbApplicationObjects | |||
| 1.3.6.1.4.1.29601.2.22.3.1 | NodefsDCBXObjects | |||
| 1.3.6.1.4.1.29601.2.22.3.1.1 | NodefsDCBXScalars | |||
| 1.3.6.1.4.1.29601.2.22.3.1.1.1 | ScalarfsDcbxGlobalTraceLevel | read-write | current | This object is used to enable Trace Statements in DCBX Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer… |
| 1.3.6.1.4.1.29601.2.22.3.1.2 | TablefsDCBXPortTable | not-accessible | current | Port table contains the DCBX feature status (enabled or disabled). |
| 1.3.6.1.4.1.29601.2.22.3.1.2.1 | RowfsDCBXPortEntry | not-accessible | current | An entry containing DCBX control parameters for a particular port. |
| 1.3.6.1.4.1.29601.2.22.3.1.2.1.1 | ColumnfsDCBXPortNumber | not-accessible | current | This indicates the interface identifier for which the DCBX configuration is applied. |
| 1.3.6.1.4.1.29601.2.22.3.1.2.1.2 | ColumnfsDCBXAdminStatus | read-write | current | This object is used to enable or disable DCBX feature on the given port. If set to 'enabled(1)', DCBX feature will be enabled on this port. This will start the… |
| 1.3.6.1.4.1.29601.2.22.3.1.2.1.3 | ColumnfsDCBXMode | read-write | current | This object specifies the mode of the DCBX in which the operating version will be elected dynamically based on TLV exchange when the Auto mode is selected. In … |
| 1.3.6.1.4.1.29601.2.22.3.2 | NodefsETSObjects | |||
| 1.3.6.1.4.1.29601.2.22.3.2.1 | NodefsETSScalars | |||
| 1.3.6.1.4.1.29601.2.22.3.2.1.1 | ScalarfsETSSystemControl | read-write | current | The ETS(Enhanced Transmission selection) system control status for the switch. Starts or shutdown ETS Module in the system. When set as 'start', resources requ… |
| 1.3.6.1.4.1.29601.2.22.3.2.1.2 | ScalarfsETSModuleStatus | read-write | current | The ETS(Enhanced Transmission Selection) Module status for the switch. If this object is set as 'disabled', then for all the ports in which ETS has been enable… |
| 1.3.6.1.4.1.29601.2.22.3.2.1.3 | ScalarfsETSClearCounters | read-write | current | This object when set to TRUE, clears the following counters for the ETS Module: fsETSConfTxTLVCounter, fsETSConfRxTLVCounter, fsETSConfRxTLVErrors, fsETSRecoTx… |
| 1.3.6.1.4.1.29601.2.22.3.2.1.4 | ScalarfsETSGlobalEnableTrap | read-write | current | This object is used to enable or disable the transmission of TRAP notification messages for ETS feature. Each bit in this object corresponds to a particular tr… |
| 1.3.6.1.4.1.29601.2.22.3.2.1.5 | ScalarfsETSGeneratedTrapCount | read-write | current | This object indicates the number of Traps sent. This counter will be incremented every time when there is any trap sent |
| 1.3.6.1.4.1.29601.2.22.3.2.2 | TablefsETSPortTable | not-accessible | current | ETS Port table contains the ETS (Enhanced Transmission Selection) features information specific to this port. An entry created in this table in the following t… |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1 | RowfsETSPortEntry | not-accessible | current | An entry containing ETS control parameters and ETS information for a particular port. |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.1 | ColumnfsETSPortNumber | not-accessible | current | This indicates the interface identifier for which the ETS configuration is applied. |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.2 | ColumnfsETSAdminMode | read-write | current | This object is used to configure administrative mode for ETS feature on the given port. If set to 'auto(0)', and if ETS feature is enabled on this port then al… |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.3 | ColumnfsETSDcbxOperState | read-only | current | This object is used to display the current state of the DCBX state machine for the ETS feature on the given port. If state is Off '(0)', then ETS Operational(l… |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.4 | ColumnfsETSDcbxStateMachine | read-only | current | This object is used to display the DCBX state machine type that is used by the ETS feature on the given port. |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.5 | ColumnfsETSClearTLVCounters | read-write | current | This object when set to TRUE, clears the following counters associated with a Port: fsETSConfTxTLVCounter, fsETSConfRxTLVCounter, fsETSConfRxTLVErrors, fsETSRe… |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.6 | ColumnfsETSConfTxTLVCounter | read-only | current | This object is used to keep track of the number of ETS configuration TLV that are transmitted from this port. This counter will be incremented every time when … |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.7 | ColumnfsETSConfRxTLVCounter | read-only | current | This object is used to keep track of the number of ETS ConfigurationTLV that are received in this port. This counter will be incremented every time when there … |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.8 | ColumnfsETSConfRxTLVErrors | read-only | current | This object is used to keep track of number of malformed ETS Configuration TLVs received by ETS. This counter will be incremented every time a ETS Configuratio… |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.9 | ColumnfsETSRecoTxTLVCounter | read-only | current | This object is used to keep track of the number of ETS Recommendation TLV that are transmitted from this port. This counter will be incremented every time when… |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.10 | ColumnfsETSRecoRxTLVCounter | read-only | current | This object is used to keep track of the number of ETS Recommendation TLV that are received in this port. This counter will be incremented every time when ther… |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.11 | ColumnfsETSRecoRxTLVErrors | read-only | current | This object is used to keep track of number of malformed ETS Recommendation TLVs received by ETS. This counter will be incremented every time a ETS Recommendat… |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.12 | ColumnfsETSTcSuppTxTLVCounter | read-only | current | This object is used to keep track of the number of TC Supported TLV that are transmitted from this port. This counter will be incremented every time when there… |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.13 | ColumnfsETSTcSuppRxTLVCounter | read-only | current | This object is used to keep track of the number of TC Supported TLV that are received in this port. This counter will be incremented every time when there is T… |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.14 | ColumnfsETSTcSuppRxTLVErrors | read-only | current | This object is used to keep track of number of malformed TC Supported TLVs received by ETS. This counter will be incremented every time a TC Supported TLV is d… |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.15 | ColumnfsETSRowStatus | read-write | current | This object is used to create and delete a row in this table. Only 'createAndGo', and 'destroy' values are allowed for this object. 'createAndWait' and 'notInS… |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.16 | ColumnfsETSSyncd | read-only | current | This object indicates whether the current DesiredConfig has been received by the peer, and is applicable only when the DCBX operating version is CEE |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.17 | ColumnfsETSError | read-only | current | This object indicates that an error has occurred during the configuration exchange with the peer. Error is also set to TRUE when the Compatible method for the … |
| 1.3.6.1.4.1.29601.2.22.3.2.2.1.18 | ColumnfsETSDcbxStatus | read-only | current | This object indicates the current DCBX status of the ETS feature . |
| 1.3.6.1.4.1.29601.2.22.3.3 | NodefsPFCObjects | |||
| 1.3.6.1.4.1.29601.2.22.3.3.1 | NodefsPFCScalars | |||
| 1.3.6.1.4.1.29601.2.22.3.3.1.1 | ScalarfsPFCSystemControl | read-write | current | The PFC(Priority Based Flow Control) system control status for the switch. Starts or shutdown PFC Module in the system. When set as 'start', resources required… |
| 1.3.6.1.4.1.29601.2.22.3.3.1.2 | ScalarfsPFCModuleStatus | read-write | current | The PFC(Priority Based Flow Control) Module status for the switch. If this object is set as 'disabled', then for all the ports in which PFC has been enabled, w… |
| 1.3.6.1.4.1.29601.2.22.3.3.1.3 | ScalarfsPFCClearCounters | read-write | current | This object when set to TRUE, clears the following counters for the PFC Module: fsPFCTxTLVCounter, fsPFCRxTLVCounter, fsPFCRxTLVErrors. Setting this object to … |
| 1.3.6.1.4.1.29601.2.22.3.3.1.4 | ScalarfsPFCGlobalEnableTrap | read-write | current | This object is used to enable or disable the transmission of TRAP notification messages for PFC feature. Each bit in this object corresponds to a particular tr… |
| 1.3.6.1.4.1.29601.2.22.3.3.1.5 | ScalarfsPFCGeneratedTrapCount | read-write | current | This object indicates the number of Traps sent. This counter will be incremented every time when there is any trap sent. |
| 1.3.6.1.4.1.29601.2.22.3.3.2 | TablefsPFCPortTable | not-accessible | current | PFC Port table contains the PFC (Priortiy Based Flow Control) features information specific to this port. An entry created in the port table populates the entr… |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1 | RowfsPFCPortEntry | not-accessible | current | An entry containing PFC control parameters and PFC information for a particular port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.1 | ColumnfsPFCPortNumber | not-accessible | current | This indicates the interface identifier for which the PFC configuration is applied. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.2 | ColumnfsPFCAdminMode | read-write | current | This object is used to configure administrative mode for PFC feature on the given port. If set to 'auto(0)', and if PFC feature is enabled on this port then al… |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.3 | ColumnfsPFCDcbxOperState | read-only | current | This object is used to display the current state of the DCBX state machine for the PFC feature on the given port. If state is Off '(1)', then PFC Operational(l… |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.4 | ColumnfsPFCDcbxStateMachine | read-only | current | This object is used to display the DCBX state machine type that is used by the PFC feature on the given port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.5 | ColumnfsPFCClearTLVCounters | read-write | current | This object when set to TRUE, clears the following counters associated with a Port: fsPFCTxTLVCounter, fsPFCRxTLVCounter, fsPFCRxTLVErrors. Setting this object… |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.6 | ColumnfsPFCTxTLVCounter | read-only | current | This object is used to keep track of the number of PFC TLV that are transmitted from this port. This counter will be incremented every time when there is PFC T… |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.7 | ColumnfsPFCRxTLVCounter | read-only | current | This object is used to keep track of the number of PFC TLV that are received in this port. This counter will be incremented every time when there is PFC TLV is… |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.8 | ColumnfsPFCRxTLVErrors | read-only | current | This object is used to keep track of number of malformed TLVs received by PFC. This counter will be incremented every time a PFC-TLV is dropped by PFC. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.9 | ColumnfsPFCRowStatus | read-write | current | This object is used to create and delete a row in this table. Only 'createAndGo', and 'destroy' values are allowed for this object. 'createAndWait' and 'notInS… |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.10 | ColumnfsPFCSyncd | read-only | current | This object indicates whether the current DesiredConfig has been received by the peer, and is applicable only when the DCBX operating version is CEE |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.11 | ColumnfsPFCError | read-only | current | This object indicates that an error has occurred during the configuration exchange with the peer. Error is also set to TRUE when the Compatible method for the … |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.12 | ColumnfsPFCDcbxStatus | read-only | current | This object indicates the current DCBX status of the PFC feature . |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.13 | ColumnfsPFCRxPauseFrameCounter | read-only | current | This object is used to keep track of total number of PFC Control Frame that are received in this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.14 | ColumnfsPFCTxPauseFrameCounter | read-only | current | This object is used to keep track of total number of PFC Control Frames that are transmitted from this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.15 | ColumnfsPFCRxPauseFrameP0Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 0 that are received in this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.16 | ColumnfsPFCRxPauseFrameP1Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 1 that are received in this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.17 | ColumnfsPFCRxPauseFrameP2Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 2 that are received in this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.18 | ColumnfsPFCRxPauseFrameP3Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 3 that are received in this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.19 | ColumnfsPFCRxPauseFrameP4Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 4 that are received in this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.20 | ColumnfsPFCRxPauseFrameP5Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 5 that are received in this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.21 | ColumnfsPFCRxPauseFrameP6Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 6 that are received in this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.22 | ColumnfsPFCRxPauseFrameP7Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 7 that are received in this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.23 | ColumnfsPFCTxPauseFrameP0Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 0 that are transmitted from this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.24 | ColumnfsPFCTxPauseFrameP1Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 1 that are transmitted from this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.25 | ColumnfsPFCTxPauseFrameP2Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 2 that are transmitted from this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.26 | ColumnfsPFCTxPauseFrameP3Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 3 that are transmitted from this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.27 | ColumnfsPFCTxPauseFrameP4Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 4 that are transmitted from this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.28 | ColumnfsPFCTxPauseFrameP5Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 5 that are transmitted from this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.29 | ColumnfsPFCTxPauseFrameP6Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 6 that are transmitted from this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.30 | ColumnfsPFCTxPauseFrameP7Counter | read-only | current | This object is used to keep track of number of PFC Control Frames with Priority 7 that are transmitted from this port. |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.31 | ColumnfsPFCDataFrameDiscardCounter | read-only | current | This object is used to keep track of number of data frames discarded |
| 1.3.6.1.4.1.29601.2.22.3.3.2.1.32 | ColumnfsPFCClearPauseFrameCounters | read-write | current | This object clears the following counters associated with a Port when set to TRUE fsPFCRxControlFrame, fsPFCTxControlFrame, fsPFCRxFramePriority0-7, fsPFCTxFra… |
| 1.3.6.1.4.1.29601.2.22.3.4 | NodefsAppPriObjects | |||
| 1.3.6.1.4.1.29601.2.22.3.4.1 | NodefsAppPriScalars | |||
| 1.3.6.1.4.1.29601.2.22.3.4.1.1 | ScalarfsAppPriSystemControl | read-write | current | The application priority system control status for the switch which starts or shuts down the application priority module in the system. When set as 'start', re… |
| 1.3.6.1.4.1.29601.2.22.3.4.1.2 | ScalarfsAppPriModuleStatus | read-write | current | The application priority Module status for the switch. When this object is set as 'disabled', the application priority feature is disabled in the system(hardwa… |
| 1.3.6.1.4.1.29601.2.22.3.4.1.3 | ScalarfsAppPriClearCounters | read-write | current | This object when set to TRUE, clears the following counters for the application priority module and resets its value to FALSE: fsAppPriTxTLVCounter, fsAppPriRx… |
| 1.3.6.1.4.1.29601.2.22.3.4.1.4 | ScalarfsAppPriGlobalEnableTrap | read-write | current | This object is used to enable or disable the transmission of TRAP notification messages for Application Priority feature. The user has to enter the correspondi… |
| 1.3.6.1.4.1.29601.2.22.3.4.1.5 | ScalarfsAppPriGeneratedTrapCount | read-write | current | This object indicates the number of Traps sent. This counter will be incremented every time when there is any trap sent |
| 1.3.6.1.4.1.29601.2.22.3.4.2 | TablefsAppPriPortTable | not-accessible | current | Application Priority Port table contains the application priority feature's information specific to this port. An entry created in the port table populates the… |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1 | RowfsAppPriPortEntry | not-accessible | current | An entry containing application priority control parameters and application priority information for a particular port. |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1.1 | ColumnfsAppPriPortNumber | not-accessible | current | This indicates the interface identifier for which the application priority configuration is applied. |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1.2 | ColumnfsAppPriAdminMode | read-write | current | This object is used to configure the admin mode for application priority feature on the given port. - If this object is configured as 'auto(0)' on a port then … |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1.3 | ColumnfsAppPriDcbxOperState | read-only | current | This object is used to display the current state of the DCBX state machine for the application priority feature on the given port. If state is Off '(1)', then … |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1.4 | ColumnfsAppPriDcbxStateMachine | read-only | current | This object is used to display the DCBX state machine type that is used by the application priority feature on the given port. |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1.5 | ColumnfsAppPriClearTLVCounters | read-write | current | This object when set to TRUE, clears the following counters associated with this port and resets its value to FALSE: fsAppPriTxTLVCounter, fsAppPriRxTLVCounter… |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1.6 | ColumnfsAppPriTxTLVCounter | read-only | current | This object is used to keep track of the number of application priority TLVs that are transmitted from the port. This counter will be incremented every time an… |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1.7 | ColumnfsAppPriRxTLVCounter | read-only | current | This object indicates the number of application priority TLVs that are received in this port. This counter will be incremented every time when there is applica… |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1.8 | ColumnfsAppPriRxTLVErrors | read-only | current | This object indicates the number of malformed TLVs received by application priority module. This counter will be incremented every time an application priority… |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1.9 | ColumnfsAppPriAppProtocols | read-only | current | This object indicates the total number of application priority entries present in the last TLV received from its peer |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1.10 | ColumnfsAppPriRowStatus | read-write | current | This object is used to create and delete a row in this table. Only 'createAndGo', and 'destroy' values are allowed for this object. 'createAndWait' and 'notInS… |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1.11 | ColumnfsAppPriSyncd | read-only | current | This object indicates whether the current DesiredConfig has been received by the peer. This object is applicable only when the DCBX operating version is CEE |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1.12 | ColumnfsAppPriError | read-only | current | This object indicates that an error has occurred during the configuration exchange with the peer. Error is also set to TRUE when the Compatible method for the … |
| 1.3.6.1.4.1.29601.2.22.3.4.2.1.13 | ColumnfsAppPriDcbxStatus | read-only | current | This object indicates the current DCBx status of the Application Priority feature. |
| 1.3.6.1.4.1.29601.2.22.3.4.3 | TablefsAppPriXAppTable | not-accessible | current | This table augments lldpXdot1dcbxAdminApplicationPriorityAppTable, describing parameters of an application priority table. |
| 1.3.6.1.4.1.29601.2.22.3.4.3.1 | RowfsAppPriXAppEntry | not-accessible | current | This table contains management information applicable to an application entry. |
| 1.3.6.1.4.1.29601.2.22.3.4.3.1.1 | ColumnfsAppPriXAppRowStatus | read-write | current | The row status of Application Priority Mapping Entry |
| 1.3.6.1.4.1.29601.2.22.3.4.4 | TablefslldpXdot1dcbxLocApplicationPriorityBasicTable | not-accessible | current | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP Application PrioriyTLV on the local system known to this agent |
| 1.3.6.1.4.1.29601.2.22.3.4.4.1 | RowfslldpXdot1dcbxLocApplicationPriorityBasicEntry | not-accessible | current | Information about the IEEE 802.1 organizational defined Application PriorityTLV LLDP extension. |
| 1.3.6.1.4.1.29601.2.22.3.4.4.1.1 | ColumnfslldpXdot1dcbxLocApplicationPriorityWilling | read-only | current | Indicates if the local system is willing to accept the Application Priority configuration of the remote system. |
| 1.3.6.1.4.1.29601.2.22.3.4.5 | TablefslldpXdot1dcbxAdminApplicationPriorityBasicTable | not-accessible | current | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP Application PrioriyTLV on the local system known to this agent |
| 1.3.6.1.4.1.29601.2.22.3.4.5.1 | RowfslldpXdot1dcbxAdminApplicationPriorityBasicEntry | not-accessible | current | Information about the IEEE 802.1 organizational defined Application PriorityTLV LLDP extension. |
| 1.3.6.1.4.1.29601.2.22.3.4.5.1.1 | ColumnfslldpXdot1dcbxAdminApplicationPriorityWilling | read-write | current | Indicates if the local system is willing to accept the Application Priority configuration of the remote system. |
| 1.3.6.1.4.1.29601.2.22.3.4.6 | TablefslldpXdot1dcbxRemApplicationPriorityBasicTable | not-accessible | current | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP Application Prioriy TLV on the local system known to this agent |
| 1.3.6.1.4.1.29601.2.22.3.4.6.1 | RowfslldpXdot1dcbxRemApplicationPriorityBasicEntry | not-accessible | current | Information about the IEEE 802.1 organizational defined Application Priority TLV LLDP extension. |
| 1.3.6.1.4.1.29601.2.22.3.4.6.1.1 | ColumnfslldpXdot1dcbxRemApplicationPriorityWilling | read-only | current | Indicates if the local system is willing to accept the Application Priority configuration of the remote system. |
| 1.3.6.1.4.1.29601.2.22.3.5 | NodefsTCSupportedObjects | |||
| 1.3.6.1.4.1.29601.2.22.3.5.1 | TablefslldpXdot1dcbxConfigTCSupportedTable | not-accessible | current | A table that controls selection of Traffic Classes Supported TLVs to be transmitted on individual ports. |
| 1.3.6.1.4.1.29601.2.22.3.5.1.1 | RowfslldpXdot1dcbxConfigTCSupportedEntry | not-accessible | current | LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Traffic Classes Supported TLV on LLDP transmission capable… |
| 1.3.6.1.4.1.29601.2.22.3.5.1.1.1 | ColumnfslldpXdot1dcbxConfigTCSupportedTxEnable | read-write | current | The fslldpXdot1dcbxConfigTCSupportedTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 org… |
| 1.3.6.1.4.1.29601.2.22.3.5.2 | TablefslldpXdot1dcbxLocTCSupportedTable | not-accessible | current | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP TCSupported TLV on the local system known to this agent |
| 1.3.6.1.4.1.29601.2.22.3.5.2.1 | RowfslldpXdot1dcbxLocTCSupportedEntry | not-accessible | current | Information about the IEEE 802.1 organizational defined Traffic Classes Supported TLV LLDP extension. |
| 1.3.6.1.4.1.29601.2.22.3.5.2.1.1 | ColumnfslldpXdot1dcbxLocTCSupported | read-only | current | Indicates the number of traffic classes supported on the local system. A value of 0 indicates that 8 traffic classes are supported. |
| 1.3.6.1.4.1.29601.2.22.3.5.3 | TablefslldpXdot1dcbxRemTCSupportedTable | not-accessible | current | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP TCSupported TLV on the local system known to this agent |
| 1.3.6.1.4.1.29601.2.22.3.5.3.1 | RowfslldpXdot1dcbxRemTCSupportedEntry | not-accessible | current | Information about the IEEE 802.1 organizational defined Traffic Classes Supported TLV LLDP extension. |
| 1.3.6.1.4.1.29601.2.22.3.5.3.1.1 | ColumnfslldpXdot1dcbxRemTCSupported | read-only | current | Indicates the number of traffic classes supported on the local system. A value of 0 indicates that 8 traffic classes are supported. |
| 1.3.6.1.4.1.29601.2.22.3.5.4 | TablefslldpXdot1dcbxAdminTCSupportedTable | not-accessible | current | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP TCSupported TLV on the local system known to this agent |
| 1.3.6.1.4.1.29601.2.22.3.5.4.1 | RowfslldpXdot1dcbxAdminTCSupportedEntry | not-accessible | current | Information about the IEEE 802.1 organizational defined Traffic Classes Supported TLV LLDP extension. |
| 1.3.6.1.4.1.29601.2.22.3.5.4.1.1 | ColumnfslldpXdot1dcbxAdminTCSupported | read-only | current | Indicates the number of traffic classes supported on the local system. A value of 0 indicates that 8 traffic classes are supported. Note that generaly this rep… |
| 1.3.6.1.4.1.29601.2.22.3.6 | NodefsDcbxCEEObjects | |||
| 1.3.6.1.4.1.29601.2.22.3.6.1 | NodefsDcbxCEEScalars | |||
| 1.3.6.1.4.1.29601.2.22.3.6.1.1 | ScalarfsDcbxCEEGlobalEnableTrap | read-write | current | This object enables or disables the transmission of TRAP notification messages for CEE. The user has to enter the corresponding INTEGER VALUE to set the bit. E… |
| 1.3.6.1.4.1.29601.2.22.3.6.1.2 | ScalarfsDcbxCEEGeneratedTrapCount | read-only | current | This object indicates the number of Traps sent. This counter will be incremented every time when there is any trap sent |
| 1.3.6.1.4.1.29601.2.22.3.6.1.3 | ScalarfsDcbxCEEClearCounters | read-write | current | This object clears the following counters for the DCBX CEE control state machine and resets its value to FALSE when set to TRUE fsDcbxTxTLVCounter, fsDcbxRxTLV… |
| 1.3.6.1.4.1.29601.2.22.3.6.2 | TablefsDcbxCEECtrlTable | not-accessible | current | This table contains the state variables of control state machine for each port operating in CEE version. |
| 1.3.6.1.4.1.29601.2.22.3.6.2.1 | RowfsDcbxCEECtrlEntry | not-accessible | current | This object specified the information about Control state variables and control TLV counters as defined in DCBX base specification Rev 1.01. |
| 1.3.6.1.4.1.29601.2.22.3.6.2.1.1 | ColumnfsDcbxCEECtrlPortNumber | not-accessible | current | This object indicates the interface identifier for which the control state variables are maintained. |
| 1.3.6.1.4.1.29601.2.22.3.6.2.1.2 | ColumnfsDcbxCEECtrlSeqNo | read-only | current | This object specifies the current sequence number that is sent in DCBX control TLVs in CEE mode. |
| 1.3.6.1.4.1.29601.2.22.3.6.2.1.3 | ColumnfsDcbxCEECtrlAckNo | read-only | current | This object specifies the current ACK number that is to be sent to peer in DCBX control TLVs in CEE mode. |
| 1.3.6.1.4.1.29601.2.22.3.6.2.1.4 | ColumnfsDcbxCEECtrlRcvdAckNo | read-only | current | This object specifies the current ACK number that is sent by peer in DCBX control TLV in CEE mode. |
| 1.3.6.1.4.1.29601.2.22.3.6.2.1.5 | ColumnfsDcbxCEECtrlTxTLVCounter | read-only | current | This object specifies the number of DCBX CEE frames transmitted per interface. |
| 1.3.6.1.4.1.29601.2.22.3.6.2.1.6 | ColumnfsDcbxCEECtrlRxTLVCounter | read-only | current | This object specifies the number of DCBX CEE frames received per interface. |
| 1.3.6.1.4.1.29601.2.22.3.6.2.1.7 | ColumnfsDcbxCEECtrlRxTLVErrorCounter | read-only | current | This object specifies the number of DCBX CEE frames discarded due to errors in the frame. |
| 1.3.6.1.4.1.29601.2.22.4 | NodefsDcbNotificationObjects | |||
| 1.3.6.1.4.1.29601.2.22.4.0 | NodefsDCBTraps | |||
| 1.3.6.1.4.1.29601.2.22.4.0.1 | NotificationfsETSModuleStatusTrap | current | This object specifies the generation of trap when there is a change in the ETS Module status.. This trap is generated only if the corresponding bit (bit 1) in … | |
| 1.3.6.1.4.1.29601.2.22.4.0.2 | NotificationfsETSPortAdminStatusTrap | current | This object specifies the generation of trap in the following conditions. Whenever there is a change in the ETS administrative status and the corresponding bit… | |
| 1.3.6.1.4.1.29601.2.22.4.0.3 | NotificationfsETSPortPeerStatusTrap | current | This object specifies the generation of trap in the following conditions. Whenever there is a change in the DCBX Peer Status and the corresponding bit (bit 3) … | |
| 1.3.6.1.4.1.29601.2.22.4.0.4 | NotificationfsETSPortDcbxOperStateTrap | current | This object specifies the generation of trap in the following conditions. Whenever there is a change in the ETS Operational State and the corresponding bit (bi… | |
| 1.3.6.1.4.1.29601.2.22.4.0.5 | NotificationfsPFCModuleStatusTrap | current | This object specifies the generation of trap when there is a change in the PFC Module status is enabled. This trap is generated only if the corresponding bit (… | |
| 1.3.6.1.4.1.29601.2.22.4.0.6 | NotificationfsPFCPortAdminStatusTrap | current | This object specifies the generation of trap in the following conditions. Whenever there is a change in the PFC administrative Status and the corresponding bit… | |
| 1.3.6.1.4.1.29601.2.22.4.0.7 | NotificationfsPFCPortPeerStatusTrap | current | This object specifies the generation of trap in the following conditions. Whenever there is a change in the DCBX Peer Status and the corresponding bit (bit 3) … | |
| 1.3.6.1.4.1.29601.2.22.4.0.8 | NotificationfsPFCPortDcbxOperStateTrap | current | This object specifies the generation of trap in the following conditions. Whenever there is a change in the PFC Operational State and the corresponding bit (bi… | |
| 1.3.6.1.4.1.29601.2.22.4.0.9 | NotificationfsAppPriModuleStatusTrap | current | This object specifies the generation of trap whenever there is a change in the application priority Module status. This trap is generated only if the correspon… | |
| 1.3.6.1.4.1.29601.2.22.4.0.10 | NotificationfsAppPriPortAdminStatusTrap | current | This object specifies the generation of trap whenever there is a change in the application priority administrative Status and the corresponding bit (bit 2) in … | |
| 1.3.6.1.4.1.29601.2.22.4.0.11 | NotificationfsAppPriPortPeerStatusTrap | current | This object specifies the generation of trap whenever there is a change in the DCBX Peer Status and the corresponding bit (bit 3) in the fsAppPriGlobalEnableTr… | |
| 1.3.6.1.4.1.29601.2.22.4.0.12 | NotificationfsAppPriPortDcbxOperStateTrap | current | This object specifies the generation of trap whenever there is a change in the application priority Operational State and the corresponding bit (bit 4) in the … | |
| 1.3.6.1.4.1.29601.2.22.4.0.13 | NotificationfsDcbxCEELldpTxDisabledTrap | current | This object specifies the generation of trap when LLDP Tx is disabled. | |
| 1.3.6.1.4.1.29601.2.22.4.0.14 | NotificationfsDcbxCEELldpRxDisabledTrap | current | This object specifies the generation of trap when LLDP Rx is disabled. | |
| 1.3.6.1.4.1.29601.2.22.4.0.15 | NotificationfsDcbxCEEDupControlTlvTrap | current | This object specifies sending of trap when a duplicate control Sub-TLV is detected. | |
| 1.3.6.1.4.1.29601.2.22.4.0.16 | NotificationfsDcbxCEEPeerNoRespTrap | current | This object specifies sending of trap when the peer has stopped responding as evidenced by an LLDP timeout event. | |
| 1.3.6.1.4.1.29601.2.22.4.0.17 | NotificationfsDcbxCEEDupFeatureTlvTrap | current | This object specifies sending of trap when a duplicate feature Sub-TLV is detected. | |
| 1.3.6.1.4.1.29601.2.22.4.0.18 | NotificationfsDcbxCEEPeerNoFeatureTrap | current | This object specifies sending of trap when a feature is not supported on by a peer. | |
| 1.3.6.1.4.1.29601.2.22.4.0.19 | NotificationfsDcbxCEEFeatureErrorTrap | current | This object specifies sending of trap whenever fsDcbxCEEFeatureError is true and there is no other trap defined for the specific error condition. | |
| 1.3.6.1.4.1.29601.2.22.4.0.20 | NotificationfsDcbxCEEAppPriProtocolNotSuppTrap | current | This object specifies sending of trap when the Application protocol TLV received with one or more unsupported application protocol. | |
| 1.3.6.1.4.1.29601.2.22.4.0.21 | NotificationfsDcbxCEEVersionChanged | current | This object specifies sending of trap when the Application protocol TLV is received with a different version. | |
| 1.3.6.1.4.1.29601.2.22.4.1 | NodefsDCBTrapObjects | |||
| 1.3.6.1.4.1.29601.2.22.4.1.1 | ScalarfsDcbTrapPortNumber | accessible-for-notify | current | This object refers to the Port number for which the DCBX feature is enabled. And will be used in sending the feature port specific Traps. |
| 1.3.6.1.4.1.29601.2.22.4.1.2 | ScalarfsDcbPeerUpStatus | accessible-for-notify | current | This object refers to the DCBX Peer Up or Peer down status on the port. If the value is 'true', then the DCBX Peer will be present and UP. If the value is 'fal… |
| 1.3.6.1.4.1.29601.2.22.4.1.3 | ScalarfsDcbFeatureType | accessible-for-notify | current | This object refers to the DCBX feature type. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DcbAdminMode | INTEGER { auto(0), on(1), off(2)} | current | 'auto(0)', In this mode, all the opertaional(local) parameters for the feature will be determined by the DCBX state machine. 'on(1)', In this mode, all the opertaional(local) parameters for the feature will not be deter… |
| DcbState | INTEGER { off(0), init(1), rxrecommended(2), ceedisabled(3), uselocalcfg(4), usepeercfg(5) } | current | The state of the DCBX state machine. It can be any one of the following IEEE or CEE states based on the operating version. 1. In IEEE mode the Dcbstate can hold any of the following values : off '(0)', In this state all… |
| DcbStateMachineType | INTEGER { asymmetric(1), symmetric(2), feature(3) } | current | asymmetric'(1)',By using this state machine the operational parameters of the DCB feature can be same as peer or not. This state machine type is used when DcbxVersion is IEEE. symmetric '(2)',By using this state machine… |
| DcbxStatus | INTEGER { peerNotAdvFeat(1), peerNotAdvDcbx(2), notAdvertise(3), disabled(4), peerDisabled(5),peerInError(6), peerNWillingCompatibleCfg(7), cfgNotCompatible(8), ok(9), unknown(10) } | current | Indicates the current status of a given feature, which can indicates the following values: peerNotAdvFeat '(1)' Indicates that the peer did not advertise the feature. peerNotAdvDcbx '(2)' Indicates that the peer did not… |
| DcbxVersion | INTEGER { auto(1), ieee(2), cee(3), unknown(4) } | current | The DCBX can operate in following versions. cee '(0)', It will operate only in CEE version ieee '(1)', It will operate only in IEEE version. auto '(2)', It can operate either in IEEE version or CEE version. The DCBX ver… |
| EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |
| FsLldpXdot1dcbxTCSupportedCapacity | Integer32 (0|1..7) | current | Indicates the supported capacity of a given feature, for example, the number of traffic classes supported. This TC is used for features that have a maximum capacity of eight but may have fewer supported. A value of zero… |