ARICENT-DIFFSERV-MIB
333 objects
This MIB defines the objects necessary to manage a device that uses the Differentiated Services.
Imported Objects
| IF-MIB | ifIndex |
| SNMPv2-SMI | Counter64 enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.6 | IdentityfsQoSMib | This MIB defines the objects necessary to manage a device that uses the Differentiated Services. | ||
| 1.3.6.1.4.1.29601.2.6.1 | NodefsQoSMIBObjects | |||
| 1.3.6.1.4.1.29601.2.6.1.1 | NodefsQoSSystem | |||
| 1.3.6.1.4.1.29601.2.6.1.1.1 | ScalarfsQoSSystemControl | read-write | current | Starts or shutdowns QoS Module in the system. When set as 'start',resources required by QoS module are allocated & QoS module starts running. When shutdown, al… |
| 1.3.6.1.4.1.29601.2.6.1.1.2 | ScalarfsQoSStatus | read-write | current | Enables or Disables QoS Module in the system. When set as 'enabled', QoS module programs the hardware and starts Protocol Operation. When set as 'disabled', it… |
| 1.3.6.1.4.1.29601.2.6.1.1.3 | ScalarfsQoSTrcFlag | read-write | current | This object is used to enable trace statements in QoS module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer repre… |
| 1.3.6.1.4.1.29601.2.6.1.1.4 | ScalarfsQoSRateUnit | read-only | current | This Object indicates the unit for the Information Rate(CIR,EIR,PIR,PTR,CTR ...)values based on target platform. This Object specifies the unit alone. Value co… |
| 1.3.6.1.4.1.29601.2.6.1.1.5 | ScalarfsQoSRateGranularity | read-only | current | This Object indicates the acceptable Granularity level for configuring the Information Rate(CIR,EIR,PIR,PTR, CTR ...)values for a target platform. This Object … |
| 1.3.6.1.4.1.29601.2.6.1.1.6 | ScalarfsQoSVlanQueueingStatus | read-write | current | This object is used to enable or disable Vlan Based Queueing in the system. When set as 'enabled', QoS module programs the hardware with the Hierarchical Sched… |
| 1.3.6.1.4.1.29601.2.6.1.1.7 | TablefsQoSIngressDot1pMapProfileTable | not-accessible | current | This object specifies the table containing Ingress Dot1.p Profile Table. Currently table will store the Dot1.p Packet priority to internal Priority. Default ma… |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1 | RowfsQoSIngressDot1pMapProfileEntry | not-accessible | current | This object specifies the information controlling per Profile configuration for Ingress DOT1.p to Internal Priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.1 | ColumnfsQoSIngressDot1pMapProfileIndex | not-accessible | current | This object specifies the index of the table fsQoSIngressDot1pMapProfileTable. |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.2 | ColumnfsQoSIngressDot1p0ToIntPrio | read-write | current | This object is used to map the incoming Dot1.p with priority 0 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.3 | ColumnfsQoSIngressDot1p1ToIntPrio | read-write | current | This object is used to map the incoming Dot1.p with priority 1 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.4 | ColumnfsQoSIngressDot1p2ToIntPrio | read-write | current | This object is used to map the incoming Dot1.p with priority 2 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.5 | ColumnfsQoSIngressDot1p3ToIntPrio | read-write | current | This object is used to map the incoming Dot1.p with priority 3 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.6 | ColumnfsQoSIngressDot1p4ToIntPrio | read-write | current | This object is used to map the incoming Dot1.p with priority 4 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.7 | ColumnfsQoSIngressDot1p5ToIntPrio | read-write | current | This object is used to map the incoming Dot1.p with priority 5 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.8 | ColumnfsQoSIngressDot1p6ToIntPrio | read-write | current | This object is used to map the incoming Dot1.p with priority 6 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.9 | ColumnfsQoSIngressDot1p7ToIntPrio | read-write | current | This object is used to map the incoming Dot1.p with priority 7 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.10 | ColumnfsQosIngressDot1p0Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 0, which will be used by color aware polic… |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.11 | ColumnfsQosIngressDot1p1Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 1, which will be used by color aware polic… |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.12 | ColumnfsQosIngressDot1p2Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 2, which will be used by color aware polic… |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.13 | ColumnfsQosIngressDot1p3Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 3, which will be used by color aware polic… |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.14 | ColumnfsQosIngressDot1p4Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 4, which will be used by color aware polic… |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.15 | ColumnfsQosIngressDot1p5Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 5, which will be used by color aware polic… |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.16 | ColumnfsQosIngressDot1p6Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 6, which will be used by color aware polic… |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.17 | ColumnfsQosIngressDot1p7Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress Dot1p Priority value 7, which will be used by color aware polic… |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.18 | ColumnfsQoSIngressDot1pMapProfileStatus | read-create | current | This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not … |
| 1.3.6.1.4.1.29601.2.6.1.1.7.1.19 | ColumnfsQosIngressDot1pExpbitStatus | read-write | current | This object is used to define whether the Incoming MPLS traffic to be classified based on DOT1P or EXP Profile. If it is Enabled, then Incoming MPLS as well as… |
| 1.3.6.1.4.1.29601.2.6.1.1.8 | TablefsQoSEgressDot1pMapProfileTable | not-accessible | current | This object specifies the table containing Egress Dot1.p Profile Table. Currently table will store the internal Priority to Dot1.p. Default mapping is given be… |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1 | RowfsQoSEgressDot1pMapProfileEntry | not-accessible | current | This object specifies the information controlling per Profile configuration for Internal Priority to Dot1.p. |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.1 | ColumnfsQoSEgressDot1pMapProfileIndex | not-accessible | current | This object specifies the index of the table fsQoSEgressDot1pMapProfileTable. |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.2 | ColumnfsQoSEgressIntPrio0ToDot1p | read-write | current | This object is used to map the internal priority to DOT1.p for Priority 0. |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.3 | ColumnfsQoSEgressIntPrio1ToDot1p | read-write | current | This object is used to map the internal priority to DOT1.p for Priority 1. |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.4 | ColumnfsQoSEgressIntPrio2ToDot1p | read-write | current | This object is used to map the internal priority to DOT1.p for Priority 2. |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.5 | ColumnfsQoSEgressIntPrio3ToDot1p | read-write | current | This object is used to map the internal priority to DOT1.p for Priority 3. |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.6 | ColumnfsQoSEgressIntPrio4ToDot1p | read-write | current | This object is used to map the internal priority to DOT1.p for Priority 4. |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.7 | ColumnfsQoSEgressIntPrio5ToDot1p | read-write | current | This object is used to map the internal priority to DOT1.p for Priority 5. |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.8 | ColumnfsQoSEgressIntPrio6ToDot1p | read-write | current | This object is used to map the internal priority to DOT1.p for Priority 6. |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.9 | ColumnfsQoSEgressIntPrio7ToDot1p | read-write | current | This object is used to map the internal priority to DOT1.p for Priority 7. |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.10 | ColumnfsQosEgressIntPrio0Dot1pColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 0, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.11 | ColumnfsQosEgressIntPrio1Dot1pColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 1, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.12 | ColumnfsQosEgressIntPrio2Dot1pColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 2, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.13 | ColumnfsQosEgressIntPrio3Dot1pColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 3, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.14 | ColumnfsQosEgressIntPrio4Dot1pColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 4, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.15 | ColumnfsQosEgressIntPrio5Dot1pColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 5, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.16 | ColumnfsQosEgressIntPrio6Dot1pColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 6, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.17 | ColumnfsQosEgressIntPrio7Dot1pColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 7, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.8.1.18 | ColumnfsQoSEgressDot1pMapProfileStatus | read-create | current | This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not … |
| 1.3.6.1.4.1.29601.2.6.1.1.9 | TablefsQoSIngressExpMapProfileTable | not-accessible | current | This object specifies the table containing Ingress Experimental Profile Table. Currently table will store the Experimental priority to internal Priority. When … |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1 | RowfsQoSIngressExpMapProfileEntry | not-accessible | current | This object specifies the information controlling per Profile configuration for Experimental Bit to Internal Priority . |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.1 | ColumnfsQoSIngressExpMapProfileIndex | not-accessible | current | This object specifies the index of the table fsQoSIngressExpMapProfileTable. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.2 | ColumnfsQoSIngressExp0ToIntPrio | read-write | current | This object is used to map the incoming Experimental bit with priority 0 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.3 | ColumnfsQoSIngressExp1ToIntPrio | read-write | current | This object is used to map the incoming Experimental bit with priority 1 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.4 | ColumnfsQoSIngressExp2ToIntPrio | read-write | current | This object is used to map the incoming Experimental bit with priority 2 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.5 | ColumnfsQoSIngressExp3ToIntPrio | read-write | current | This object is used to map the incoming Experimental bit with priority 3 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.6 | ColumnfsQoSIngressExp4ToIntPrio | read-write | current | This object is used to map the incoming Experimental bit with priority 4 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.7 | ColumnfsQoSIngressExp5ToIntPrio | read-write | current | This object is used to map the incoming Experimental bit with priority 5 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.8 | ColumnfsQoSIngressExp6ToIntPrio | read-write | current | This object is used to map the incoming Experimental bit with priority 6 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.9 | ColumnfsQoSIngressExp7ToIntPrio | read-write | current | This object is used to map the incoming Experimental bit with priority 7 to internal priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.10 | ColumnfsQosIngressExp0Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 0, which will be used by color aware policer. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.11 | ColumnfsQosIngressExp1Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 1, which will be used by color aware policer. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.12 | ColumnfsQosIngressExp2Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 2, which will be used by color aware policer. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.13 | ColumnfsQosIngressExp3Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 3, which will be used by color aware policer. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.14 | ColumnfsQosIngressExp4Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 4, which will be used by color aware policer. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.15 | ColumnfsQosIngressExp5Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 5, which will be used by color aware policer. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.16 | ColumnfsQosIngressExp6Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 6, which will be used by color aware policer. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.17 | ColumnfsQosIngressExp7Color | read-write | current | This object specifies the user defined color classification for the traffic stream with ingress MPLS EXP value 7, which will be used by color aware policer. |
| 1.3.6.1.4.1.29601.2.6.1.1.9.1.18 | ColumnfsQoSIngressExpMapProfileStatus | read-create | current | This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not … |
| 1.3.6.1.4.1.29601.2.6.1.1.10 | TablefsQoSEgressExpMapProfileTable | not-accessible | current | This object specifies the table containing Egress MPLS Profile Table. Currently table will store the internal Priority to Experimental value. When this profile… |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1 | RowfsQoSEgressExpMapProfileEntry | not-accessible | current | This object specifies the information controlling per Profile configuration for Internal Priority to Experimental Bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.1 | ColumnfsQoSEgressExpMapProfileIndex | not-accessible | current | This object specifies the index of the table fsQoSEgressExpMapProfileTable. |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.2 | ColumnfsQoSEgressIntPrio0ToExp | read-write | current | This object is used to map the internal priority 0 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.3 | ColumnfsQoSEgressIntPrio1ToExp | read-write | current | This object is used to map the internal priority 1 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.4 | ColumnfsQoSEgressIntPrio2ToExp | read-write | current | This object is used to map the internal priority 2 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.5 | ColumnfsQoSEgressIntPrio3ToExp | read-write | current | This object is used to map the internal priority 3 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.6 | ColumnfsQoSEgressIntPrio4ToExp | read-write | current | This object is used to map the internal priority 4 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.7 | ColumnfsQoSEgressIntPrio5ToExp | read-write | current | This object is used to map the internal priority 5 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.8 | ColumnfsQoSEgressIntPrio6ToExp | read-write | current | This object is used to map the internal priority 6 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.9 | ColumnfsQoSEgressIntPrio7ToExp | read-write | current | This object is used to map the internal priority 7 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.10 | ColumnfsQosEgressIntPrio0ExpColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 0, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.11 | ColumnfsQosEgressIntPrio1ExpColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 1, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.12 | ColumnfsQosEgressIntPrio2ExpColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 2, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.13 | ColumnfsQosEgressIntPrio3ExpColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 3, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.14 | ColumnfsQosEgressIntPrio4ExpColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 4, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.15 | ColumnfsQosEgressIntPrio5ExpColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 5, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.16 | ColumnfsQosEgressIntPrio6ExpColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 6, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.17 | ColumnfsQosEgressIntPrio7ExpColor | read-write | current | This object specifies the user defined color classification for the egress traffic stream with internal Priority value 7, which will be used by color aware pol… |
| 1.3.6.1.4.1.29601.2.6.1.1.10.1.18 | ColumnfsQoSEgressExpMapProfileStatus | read-create | current | This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not … |
| 1.3.6.1.4.1.29601.2.6.1.1.11 | TablefsQoSProfileMappingTable | not-accessible | current | This object specifies the table that associates Dot1P or EXP ingress and egress profiles on an interface. When profiles are attached to a sub-interface, then t… |
| 1.3.6.1.4.1.29601.2.6.1.1.11.1 | RowfsQoSProfileMappingeEntry | not-accessible | current | This object specifies the information controlling per port configuration for Priority Code Point Encoding and Decoding. |
| 1.3.6.1.4.1.29601.2.6.1.1.11.1.1 | ColumnfsQoSIfIndex | not-accessible | current | This object specifies the interface index for which the ingress/egress profile is configured. When EXP profiles are mapped to this interface, it will be applie… |
| 1.3.6.1.4.1.29601.2.6.1.1.11.1.2 | ColumnfsQoSProfileMappingType | not-accessible | current | This object specifies the Profile Mapping to be applied on Dot1P/IP/MPLS type. For Egress EXP profile table, we can specify the internal priority to EXP as wel… |
| 1.3.6.1.4.1.29601.2.6.1.1.11.1.3 | ColumnfsQoSProfileMappingIngressProfileIndex | read-write | current | This object specifies the Ingress Profile ID to be Mapped to a Port/SubInterface. |
| 1.3.6.1.4.1.29601.2.6.1.1.11.1.4 | ColumnfsQoSProfileMappingEgressProfileIndex | read-write | current | This object specifies the Egress Profile ID to be Mapped to a Port/SubInterface. |
| 1.3.6.1.4.1.29601.2.6.1.1.11.1.5 | ColumnfsQoSProfileMappingRowStatus | read-create | current | This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not … |
| 1.3.6.1.4.1.29601.2.6.1.1.12 | TablefsQoSEgressExpDot1pMapProfileTable | not-accessible | current | This object specifies the table containing Egress MPLS Profile Table. Currently table will store the internal Priority to Experimental and DOT1P value. When th… |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1 | RowfsQoSEgressExpDot1pMapProfileEntry | not-accessible | current | This object specifies the information controlling per Profile configuration for Internal Priority to Experimental Bit and DOT1P Priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.1 | ColumnfsQoSEgressExpDot1pMapProfileIndex | not-accessible | current | This object specifies the index of the table fsQoSEgressExpDot1pMapProfileTable. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.2 | ColumnfsQoSEgressIntPrio0ToExpMap | read-write | current | This object is used to map the internal priority 0 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.3 | ColumnfsQoSEgressIntPrio1ToExpMap | read-write | current | This object is used to map the internal priority 1 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.4 | ColumnfsQoSEgressIntPrio2ToExpMap | read-write | current | This object is used to map the internal priority 2 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.5 | ColumnfsQoSEgressIntPrio3ToExpMap | read-write | current | This object is used to map the internal priority 3 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.6 | ColumnfsQoSEgressIntPrio4ToExpMap | read-write | current | This object is used to map the internal priority 4 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.7 | ColumnfsQoSEgressIntPrio5ToExpMap | read-write | current | This object is used to map the internal priority 5 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.8 | ColumnfsQoSEgressIntPrio6ToExpMap | read-write | current | This object is used to map the internal priority 6 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.9 | ColumnfsQoSEgressIntPrio7ToExpMap | read-write | current | This object is used to map the internal priority 7 to outgoing Experimental bit. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.10 | ColumnfsQoSEgressIntPrio0ToDot1pMap | read-write | current | This object is used to map the internal priority 0 to outgoing Dot1P priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.11 | ColumnfsQoSEgressIntPrio1ToDot1pMap | read-write | current | This object is used to map the internal priority 1 to outgoing Dot1P priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.12 | ColumnfsQoSEgressIntPrio2ToDot1pMap | read-write | current | This object is used to map the internal priority 2 to outgoing Dot1P priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.13 | ColumnfsQoSEgressIntPrio3ToDot1pMap | read-write | current | This object is used to map the internal priority 3 to outgoing Dot1P priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.14 | ColumnfsQoSEgressIntPrio4ToDot1pMap | read-write | current | This object is used to map the internal priority 4 to outgoing Dot1P priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.15 | ColumnfsQoSEgressIntPrio5ToDot1pMap | read-write | current | This object is used to map the internal priority 5 to outgoing Dot1P priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.16 | ColumnfsQoSEgressIntPrio6ToDot1pMap | read-write | current | This object is used to map the internal priority 6 to outgoing Dot1P priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.17 | ColumnfsQoSEgressIntPrio7ToDot1pMap | read-write | current | This object is used to map the internal priority 7 to outgoing Dot1P priority. |
| 1.3.6.1.4.1.29601.2.6.1.1.12.1.18 | ColumnfsQoSEgressExpDot1pMapProfileStatus | read-create | current | This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not … |
| 1.3.6.1.4.1.29601.2.6.1.1.13 | TablefsQoSIngressDscpProfileTable | not-accessible | current | This object specifies the table containing Ingress Dscp Profile Table. Currently table will store the default DSCP Packet priority to internal Priority. Defaul… |
| 1.3.6.1.4.1.29601.2.6.1.1.13.1 | RowfsQoSIngressDscpProfileEntry | not-accessible | current | This object specifies the information controlling per Profile configuration for DSCP Bit to Internal Priority . |
| 1.3.6.1.4.1.29601.2.6.1.1.13.1.1 | ColumnfsQoSIngressDscpMapProfileIndex | not-accessible | current | This object specifies the index of the table fsQoSIngressDscpMapProfileTable. |
| 1.3.6.1.4.1.29601.2.6.1.1.13.1.2 | ColumnfsQoSIngressDscpProfileStatus | read-create | current | This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not … |
| 1.3.6.1.4.1.29601.2.6.1.1.14 | TablefsQoSIngressDscpMapProfileTable | not-accessible | current | This object specifies the table containing Ingress Dscp Profile Table. Currently table will store the user specified DSCP Packet priority to internal Priority.… |
| 1.3.6.1.4.1.29601.2.6.1.1.14.1 | RowfsQoSIngressDscpMapProfileEntry | not-accessible | current | This object specifies the information controlling per Profile configuration for DSCP Bit to Internal Priority . |
| 1.3.6.1.4.1.29601.2.6.1.1.14.1.1 | ColumnfsQoSIngressDscpCodePoint | not-accessible | current | This object is used to configure DSCP to internal priority mapping. Administrator has the control for mapping all 64 Code point to Internal Priority mapping. T… |
| 1.3.6.1.4.1.29601.2.6.1.1.14.1.2 | ColumnfsQoSIngressDscpIntPrio | read-write | current | This object is used to configure DSCP to internal priority mapping. |
| 1.3.6.1.4.1.29601.2.6.1.1.14.1.3 | ColumnfsQoSIngressDscpMapProfileStatus | read-create | current | This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not … |
| 1.3.6.1.4.1.29601.2.6.1.2 | NodefsQoSClass | |||
| 1.3.6.1.4.1.29601.2.6.1.2.1 | TablefsQoSPriorityMapTable | not-accessible | current | A table to map incoming priority to a regenerated priority. This table is used to regenerate port/VLAN priorities for an incoming packet. It can be used to dir… |
| 1.3.6.1.4.1.29601.2.6.1.2.1.1 | RowfsQoSPriorityMapEntry | not-accessible | current | An entry to map an incoming priority, drop-precedence to a regenerated priority value for an ingress PORT/VLAN. The PORT/VLAN indices may take dont-care (0) va… |
| 1.3.6.1.4.1.29601.2.6.1.2.1.1.1 | ColumnfsQoSPriorityMapID | not-accessible | current | The output priority map index for the incoming packet received over ingress PORT/VLAN with specified incoming priority. This is unique for each entry in the pr… |
| 1.3.6.1.4.1.29601.2.6.1.2.1.1.2 | ColumnfsQoSPriorityMapName | read-write | current | This indicates the Name for the Priority map entry. It should be unique in this Table. |
| 1.3.6.1.4.1.29601.2.6.1.2.1.1.3 | ColumnfsQoSPriorityMapIfIndex | read-write | current | Incoming Port Number. The PORT may take dont-care (0) values as required. |
| 1.3.6.1.4.1.29601.2.6.1.2.1.1.4 | ColumnfsQoSPriorityMapVlanId | read-write | current | Vlan Id for Priority regeneration.The VlanId may take dont-care (0) values as required. |
| 1.3.6.1.4.1.29601.2.6.1.2.1.1.5 | ColumnfsQoSPriorityMapInPriority | read-write | current | The incoming Priority value determined for the received frame. This value is equivalent to the priority( VLAN (4 bit)/DSCP( 6 bit) priority bits) indicated in … |
| 1.3.6.1.4.1.29601.2.6.1.2.1.1.6 | ColumnfsQoSPriorityMapInPriType | read-write | current | The Incoming Priority Type is used to Identify the 'fsQoSPriorityMapInPriority' value is a vlanPri or IP TOS or IP DSCP or MPLS EXP or dot1P. If the incoming P… |
| 1.3.6.1.4.1.29601.2.6.1.2.1.1.7 | ColumnfsQoSPriorityMapRegenPriority | read-write | current | The Regenerated Priority value determined for the received frame. |
| 1.3.6.1.4.1.29601.2.6.1.2.1.1.8 | ColumnfsQoSPriorityMapRegenInnerPriority | read-write | current | The Regenerated Inner-VLAN (CVLAN) Priority value determined for the received frame. It the Values is 8 then this object is not configured by user |
| 1.3.6.1.4.1.29601.2.6.1.2.1.1.9 | ColumnfsQoSPriorityMapConfigStatus | read-only | current | The status of the prority map entry. Indicates whether entry is configured by management or is a default entry. |
| 1.3.6.1.4.1.29601.2.6.1.2.1.1.10 | ColumnfsQoSPriorityMapStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. It can be deleted 'destroy', only if it is not referenced by o… |
| 1.3.6.1.4.1.29601.2.6.1.2.1.1.11 | ColumnfsQoSPriorityMapInDEI | read-write | current | This object specifies the Drop_eligible bit in the incoming frames. Either it can take false(0) or true (1). By default, drop_eligible bit is not set. |
| 1.3.6.1.4.1.29601.2.6.1.2.1.1.12 | ColumnfsQoSPriorityMapRegenColor | read-write | current | This object specifies the regenerated color determined for the received frame. |
| 1.3.6.1.4.1.29601.2.6.1.2.2 | TablefsQoSClassMapTable | not-accessible | current | This table contains the Multifield Classifier details. It takes input from the ACL or priority-map table and outputs a CLASS for the traffic-class pattern/matc… |
| 1.3.6.1.4.1.29601.2.6.1.2.2.1 | RowfsQoSClassMapEntry | not-accessible | current | A Multi-field Classifier entry maps an ACL entry or a priority-map to a CLASS of Service. |
| 1.3.6.1.4.1.29601.2.6.1.2.2.1.1 | ColumnfsQoSClassMapId | not-accessible | current | An index that enumerates the MultiField Classifier table. |
| 1.3.6.1.4.1.29601.2.6.1.2.2.1.2 | ColumnfsQoSClassMapName | read-write | current | This indicates the Name for the Entry.Multiple ACL/priority-map entries can map to the same CLASS. They need to be configured with the same ClassMapName. |
| 1.3.6.1.4.1.29601.2.6.1.2.2.1.3 | ColumnfsQoSClassMapL2FilterId | read-write | current | This Object specifies the ID of the MAC filter, the details of which should be matched against the incoming packet. A valid value of this object is not mandato… |
| 1.3.6.1.4.1.29601.2.6.1.2.2.1.4 | ColumnfsQoSClassMapL3FilterId | read-write | current | This Object specifies the ID of the IP filter, the details of which should be matched against the incoming packet. A valid value of this object is not mandator… |
| 1.3.6.1.4.1.29601.2.6.1.2.2.1.5 | ColumnfsQoSClassMapPriorityMapId | read-write | current | This Object specifies the priority map ID for mapping incoming priority against received packet.A valid value of this object is not mandatory for the creation … |
| 1.3.6.1.4.1.29601.2.6.1.2.2.1.6 | ColumnfsQoSClassMapCLASS | read-write | current | This represents the Traffic CLASS to which an incoming frame pattern is classified. The administrator needs to define the logical groups that represent this CL… |
| 1.3.6.1.4.1.29601.2.6.1.2.2.1.7 | ColumnfsQoSClassMapClfrId | read-write | current | This represents the Classifier Id of teh Classifier in the Standard Qos Entry. This used to get the datapath entry pointing to teh CLass-Map with respect to th… |
| 1.3.6.1.4.1.29601.2.6.1.2.2.1.8 | ColumnfsQoSClassMapPreColor | read-write | current | This represents the color of the packet prior to metering. The default Drop-Precedence for the packet can be evaluated using this object. This value is overrid… |
| 1.3.6.1.4.1.29601.2.6.1.2.2.1.9 | ColumnfsQoSClassMapVlanMapId | read-write | current | This object specifies the VLAN Map ID for mapping an incoming VLAN to an Egress Subscriber Queue. Filter ID/ Priority-Map Id are mutually exclusive to the Vlan… |
| 1.3.6.1.4.1.29601.2.6.1.2.2.1.10 | ColumnfsQoSClassMapStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active. CreateAndGo not allowed ,it can be … |
| 1.3.6.1.4.1.29601.2.6.1.2.3 | TablefsQoSClassToPriorityTable | not-accessible | current | This table assigns local priority values for a input CLASS. This table is optional and can be configured as per user requirement. This table is provided for ea… |
| 1.3.6.1.4.1.29601.2.6.1.2.3.1 | RowfsQoSClassToPriorityEntry | not-accessible | current | An entry to specify a regenerated priority value for a input CLASS. |
| 1.3.6.1.4.1.29601.2.6.1.2.3.1.1 | ColumnfsQoSClassToPriorityCLASS | not-accessible | current | This represents the Traffic CLASS to which an incoming frame pattern is classified. The administrator needs to define the traffic class patterns that represent… |
| 1.3.6.1.4.1.29601.2.6.1.2.3.1.2 | ColumnfsQoSClassToPriorityRegenPri | read-write | current | The Regenerated Priority value determined for the input CLASS. |
| 1.3.6.1.4.1.29601.2.6.1.2.3.1.3 | ColumnfsQoSClassToPriorityGroupName | read-write | current | This is for unique identification of the group to which a input CLASS belongs. |
| 1.3.6.1.4.1.29601.2.6.1.2.3.1.4 | ColumnfsQoSClassToPriorityStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active. it can be deleted 'destroy', only i… |
| 1.3.6.1.4.1.29601.2.6.1.2.4 | TablefsQoSVlanMapTable | not-accessible | current | This object specifies a table to map incoming VLAN to a specific subscriber queue of a port. |
| 1.3.6.1.4.1.29601.2.6.1.2.4.1 | RowfsQoSVlanMapEntry | not-accessible | current | This object specifies an entry to map an incoming VLAN to a specific Subscriber Queue of an Egress PORT. The ifIndex value should be of egress member port of t… |
| 1.3.6.1.4.1.29601.2.6.1.2.4.1.1 | ColumnfsQoSVlanMapID | not-accessible | current | This object specifies the output VLAN map index for the outgoing packets transmitted over egress PORT with specified VLAN-id. This is unique for each entry in … |
| 1.3.6.1.4.1.29601.2.6.1.2.4.1.2 | ColumnfsQoSVlanMapIfIndex | read-write | current | This object specifies the Egress Port Number. VLAN based subscriber Queuing/Scheduling schema will be created on this port. |
| 1.3.6.1.4.1.29601.2.6.1.2.4.1.3 | ColumnfsQoSVlanMapVlanId | read-write | current | This object specifies the Vlan Id for Subscriber queue mapping. The Vlan Id should already be configured on the switch. |
| 1.3.6.1.4.1.29601.2.6.1.2.4.1.4 | ColumnfsQoSVlanMapStatus | read-create | current | This object specifies the status of this conceptual row. All writable objects in this row may be modified at any time. It can be deleted 'destroy', only if it … |
| 1.3.6.1.4.1.29601.2.6.1.2.5 | TablefsQoSPortTable | not-accessible | current | This object specifies the table containing Qos related Properties specific to an interface. Currently, we are using this table for storing Priority Code Point … |
| 1.3.6.1.4.1.29601.2.6.1.2.5.1 | RowfsQoSPortEntry | not-accessible | current | This object specifies the information controlling per port configuration for Priority Code Point Encoding and Decoding. |
| 1.3.6.1.4.1.29601.2.6.1.2.5.1.1 | ColumnfsQoSPcpPacketType | not-accessible | current | This object specifies the incoming packet type for which Priority Code Point Encoding and decoding to be applied. |
| 1.3.6.1.4.1.29601.2.6.1.2.5.1.2 | ColumnfsQoSPcpSelRow | read-write | current | This object specifies the row to be used on this port for PCP encoding and PCP decoding tables. PCP encoding and PCP decoding on a port will be based on the ro… |
| 1.3.6.1.4.1.29601.2.6.1.2.5.1.3 | ColumnfsQoSPcpRowStatus | read-create | current | This object specifies the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not … |
| 1.3.6.1.4.1.29601.2.6.1.3 | NodefsQoSPolicy | |||
| 1.3.6.1.4.1.29601.2.6.1.3.1 | TablefsQoSMeterTable | not-accessible | current | This table enumerates specific meters that a system may use to police a stream of traffic. This may include all traffic on an interface. |
| 1.3.6.1.4.1.29601.2.6.1.3.1.1 | RowfsQoSMeterEntry | not-accessible | current | An entry in the meter table describes a single conformance level of a meter. |
| 1.3.6.1.4.1.29601.2.6.1.3.1.1.1 | ColumnfsQoSMeterId | not-accessible | current | An index that enumerates the Meter entries. |
| 1.3.6.1.4.1.29601.2.6.1.3.1.1.2 | ColumnfsQoSMeterName | read-write | current | This indicates the Name for the meter entry. It should be unique in this Table. |
| 1.3.6.1.4.1.29601.2.6.1.3.1.1.3 | ColumnfsQoSMeterType | read-write | current | The Metering algorithm associated with the Token Bucket meter. |
| 1.3.6.1.4.1.29601.2.6.1.3.1.1.4 | ColumnfsQoSMeterInterval | read-write | current | The time interval used with the token bucket. For: 1. Average Rate Meter, the Informal Differentiated Services Model section 5.2.1, - Delta. 2. Simple Token Bu… |
| 1.3.6.1.4.1.29601.2.6.1.3.1.1.5 | ColumnfsQoSMeterColorMode | read-write | current | The user defined Meter Color Mode. |
| 1.3.6.1.4.1.29601.2.6.1.3.1.1.6 | ColumnfsQoSMeterCIR | read-write | current | The committed information rate as per MEF. Must be >= 0. CIR must be less than or equal to EIR, if EIR > 0 |
| 1.3.6.1.4.1.29601.2.6.1.3.1.1.7 | ColumnfsQoSMeterCBS | read-write | current | The committed burst size as per MEF. Must be > 0 if CIR > 0. Maximum allowable size will be jumbo frame size. |
| 1.3.6.1.4.1.29601.2.6.1.3.1.1.8 | ColumnfsQoSMeterEIR | read-write | current | The excess information rate as per MEF. Must be >= 0. EIR must be greater than or equal to CIR, if EIR > 0. This is not applicable when MeterType is srtcm. |
| 1.3.6.1.4.1.29601.2.6.1.3.1.1.9 | ColumnfsQoSMeterEBS | read-write | current | The excess burst size as per MEF. Must be > 0 if EIR > 0. |
| 1.3.6.1.4.1.29601.2.6.1.3.1.1.10 | ColumnfsQoSMeterNext | read-write | current | This specifies the meter entry ID to be used for applying the second/next level of conformance on the incoming packet. A valid value of this object is not mand… |
| 1.3.6.1.4.1.29601.2.6.1.3.1.1.11 | ColumnfsQoSMeterStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified only of the Entry is not ACTIVE. It can be deleted 'destroy', only if it is… |
| 1.3.6.1.4.1.29601.2.6.1.3.2 | TablefsQoSPolicyMapTable | not-accessible | current | This table contains the class-map to policy-map details. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1 | RowfsQoSPolicyMapEntry | not-accessible | current | An entry to map a policy for a class-map. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.1 | ColumnfsQoSPolicyMapId | not-accessible | current | An index that enumerates the policy-map table entries. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.2 | ColumnfsQoSPolicyMapName | read-write | current | This the Name for a policy entry. It should be unique in this Table. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.3 | ColumnfsQoSPolicyMapIfIndex | read-write | current | This indicates the incoming interface identifier for which the policy map is applied. A Valid value of this object is not mandatory for the creation of an entr… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.4 | ColumnfsQoSPolicyMapCLASS | read-write | current | This indicates the Traffic CLASS for which the policy-map needs to be applied. A valid value is not necessary for creation of an entry in this table. When this… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.5 | ColumnfsQoSPolicyMapPHBType | read-write | current | It indicates the PHB type to be used for filling the Default PHB for the policy-map entry. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.6 | ColumnfsQoSPolicyMapDefaultPHB | read-write | current | It indicate the default out going PHB Values for the Policy-Map. It may be overriden by the Meter used for the policy-map. This value is interpreted by fsQoSPo… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.7 | ColumnfsQoSPolicyMapMeterTableId | read-write | current | The Object refers to a Meter table Id which is the index for the Meter table. A Valid value of this object is not mandatory for the creation of an entry in thi… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.8 | ColumnfsQoSPolicyMapFailMeterTableId | read-write | current | The Object refers to a Meter table Id which is the index of the Meter pointed to by diffServMeterFailNext. A Valid value of this object is not mandatory for th… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.9 | ColumnfsQoSPolicyMapInProfileConformActionFlag | read-write | current | This Object defines the action to be performed on the packet, when the packets are found to be In profile. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.10 | ColumnfsQoSPolicyMapInProfileConformActionId | read-write | current | The Object refers to an Action table Id which is the index for the Action table. This is for the reference of the StdQos mib. where we have to mention an actio… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.11 | ColumnfsQoSPolicyMapInProfileActionSetPort | read-write | current | This Object sets the new port value in case the action selected by fsQoSPolicyMapInProfileActionFlag is to assign a new out port value. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.12 | ColumnfsQoSPolicyMapConformActionSetIpTOS | read-write | current | This Object sets the new IP TOS value in case the action selected by fsQoSPolicyMapInProfileActionFlag is to assign a new IP TOS value. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.13 | ColumnfsQoSPolicyMapConformActionSetDscp | read-write | current | This Object sets the new DSCP value in case the action selected by fsQoSPolicyMapInProfileActionFlag is to assign a new DSCP value. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.14 | ColumnfsQoSPolicyMapConformActionSetVlanPrio | read-write | current | Setting the Vlan Priority of the outgoing packet. Setting of Vlan Priority is mutually exclusive to setting of Mpls EXP bits. So setting the Vlan Priority to a… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.15 | ColumnfsQoSPolicyMapConformActionSetVlanDE | read-write | current | Setting the VLAN Drop Eligible Indicator of the outgoing packet. This is applicable ONLY when MplsExp is 0 |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.16 | ColumnfsQoSPolicyMapConformActionSetInnerVlanPrio | read-write | current | Setting the Inner Vlan Priority of the outgoing packet. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.17 | ColumnfsQoSPolicyMapConformActionSetMplsExp | read-write | current | Setting the Mpls Experimental bits of the outgoing packet. Either Vlan Priority can be set OR Mpls EXP bits can be set. So setting the Mpls EXP to a non 0 valu… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.18 | ColumnfsQoSPolicyMapConformActionSetNewCLASS | read-write | current | This represents the Traffic CLASS to which an incoming frame pattern is classified after metering. The priority of the New CLASS should be lower as compared to… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.19 | ColumnfsQoSPolicyMapInProfileExceedActionFlag | read-write | current | This Object defines the action to be performed on the packet, when the packets are found to be In profile. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.20 | ColumnfsQoSPolicyMapInProfileExceedActionId | read-write | current | The Object refers to an Action table Id which is the index for the Action table. This is for the reference of the StdQos mib. where we have to mention an actio… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.21 | ColumnfsQoSPolicyMapExceedActionSetIpTOS | read-write | current | This Object sets the new IP TOS value in case the action selected by fsQoSPolicyMapInProfileActionFlag is to assign a new IP TOS value. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.22 | ColumnfsQoSPolicyMapExceedActionSetDscp | read-write | current | This Object sets the new DSCP value in case the action selected by fsQoSPolicyMapInProfileActionFlag is to assign a new DSCP value. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.23 | ColumnfsQoSPolicyMapExceedActionSetInnerVlanPrio | read-write | current | Setting the Vlan Priority of the outgoing packet. Either Vlan Priority can be set OR Mpls EXP bits can be set. So setting the Vlan Priority to a non-zero value… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.24 | ColumnfsQoSPolicyMapExceedActionSetVlanPrio | read-write | current | Setting the Inner-Vlan Priority of the outgoing packet. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.25 | ColumnfsQoSPolicyMapExceedActionSetVlanDE | read-write | current | Setting the VLAN Drop Eligible Indicator of the outgoing packet. This is applicable ONLY when MplsEXP is 0. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.26 | ColumnfsQoSPolicyMapExceedActionSetMplsExp | read-write | current | Setting the Mpls Experimental bits of the outgoing packet. Either Vlan Priority can be set OR Mpls EXP bits can be set. So setting the Mpls EXP to a non-zero v… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.27 | ColumnfsQoSPolicyMapExceedActionSetNewCLASS | read-write | current | This represents the Traffic CLASS to which an incoming frame pattern is classified after metering. The priority of the New CLASS should be lower as compared to… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.28 | ColumnfsQoSPolicyMapOutProfileActionFlag | read-write | current | This Object defines the action to be performed on the packet when the packets are found to be out of profile. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.29 | ColumnfsQoSPolicyMapOutProfileActionId | read-write | current | The Object refers to an Action table Id which is the index for the Action table. This is for the reference of the StdQos mib. where we have to mention an actio… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.30 | ColumnfsQoSPolicyMapOutProfileActionSetIPTOS | read-write | current | This Object sets the new IP TOS value in case the action selected by fsQoSPolicyMapOutProfileActionFlag is to assign a new Ip TOS value. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.31 | ColumnfsQoSPolicyMapOutProfileActionSetDscp | read-write | current | This Object sets the new DSCP value in case the action selected by fsQoSPolicyMapOutProfileActionFlag is to assign a new DSCP value. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.32 | ColumnfsQoSPolicyMapOutProfileActionSetInnerVlanPrio | read-write | current | Setting the Vlan Priority of the outgoing packet. Either Vlan Priority can be set OR Mpls EXP bits can be set. So setting the Vlan Priority to a non-zero value… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.33 | ColumnfsQoSPolicyMapOutProfileActionSetVlanPrio | read-write | current | Setting the Inner Vlan Priority of the outgoing packet. Either Vlan Priority can be set OR Mpls EXP bits can be set. So setting the Vlan Priority to a non-zero… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.34 | ColumnfsQoSPolicyMapOutProfileActionSetVlanDE | read-write | current | Setting the VLAN Drop Eligible Indicator of the outgoing packet. This is applicable ONLY when MplsEXP is 0. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.35 | ColumnfsQoSPolicyMapOutProfileActionSetMplsExp | read-write | current | Setting the Mpls Experimental bits of the outgoing packet. Either Vlan Priority can be set OR Mpls EXP bits can be set. So setting the Mpls EXP to a non-zero v… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.36 | ColumnfsQoSPolicyMapOutProfileActionSetNewCLASS | read-write | current | This represents the Traffic CLASS to which an incoming frame pattern is classified after metering. The priority of the New CLASS should be lower as compared to… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.37 | ColumnfsQoSPolicyMapStatus | read-create | current | The status of this conceptual row. |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.38 | ColumnfsQoSPolicyMapConformActionSetInnerVlanDE | read-write | current | Setting the Inner VLAN Drop Eligible Indicator of the outgoing packet. Either Inner VLAN DE can be set OR Mpls EXP bits can be set. So setting the Inner VLAN D… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.39 | ColumnfsQoSPolicyMapExceedActionSetInnerVlanDE | read-write | current | Setting the Inner VLAN Drop Eligible Indicator of the outgoing packet. Either Inner VLAN DE can be set OR Mpls EXP bits can be set. So setting the Inner VLAN D… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.40 | ColumnfsQoSPolicyMapOutProfileActionSetInnerVlanDE | read-write | current | Setting the Inner VLAN Drop Eligible Indicator of the outgoing packet. Either Inner VLAN DE can be set OR Mpls EXP bits can be set. So setting the Inner VLAN D… |
| 1.3.6.1.4.1.29601.2.6.1.3.2.1.41 | ColumnfsQoSPolicyDefaultVlanDE | read-write | current | This object is used to set the VLAN Drop Eligible Indicator of the outgoing packet. |
| 1.3.6.1.4.1.29601.2.6.1.4 | NodefsQoSTrafficMgmt | |||
| 1.3.6.1.4.1.29601.2.6.1.4.1 | TablefsQoSQTemplateTable | not-accessible | current | The queue template table configures the queue attributes. The template is re-used for configuring multiple queues. |
| 1.3.6.1.4.1.29601.2.6.1.4.1.1 | RowfsQoSQTemplateEntry | not-accessible | current | Each entry in the table is a Queue Template Configuration. |
| 1.3.6.1.4.1.29601.2.6.1.4.1.1.1 | ColumnfsQoSQTemplateId | not-accessible | current | Queue Template Table Index. |
| 1.3.6.1.4.1.29601.2.6.1.4.1.1.2 | ColumnfsQoSQTemplateName | read-write | current | This the Name for a Entry. It should be unique in this Table. |
| 1.3.6.1.4.1.29601.2.6.1.4.1.1.3 | ColumnfsQoSQTemplateDropType | read-write | current | The type of drop algorithm used by this queue template. The value other(1)requires further specification in some other MIB module. In the tailDrop(2) algorithm… |
| 1.3.6.1.4.1.29601.2.6.1.4.1.1.4 | ColumnfsQoSQTemplateDropAlgoEnableFlag | read-write | current | Enable/disable Drop Algorithm for Congestion Management |
| 1.3.6.1.4.1.29601.2.6.1.4.1.1.5 | ColumnfsQoSQTemplateSize | read-write | current | The Queue Size. This must be greater than or equal to the fsQoSRandomDetectCfgMinAvgThresh and less-than/equal to fsQoSRandomDetectCfgMaxAvgThresh if Random De… |
| 1.3.6.1.4.1.29601.2.6.1.4.1.1.6 | ColumnfsQoSQTemplateStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. It can be deleted 'destroy', only if it is not referenced by o… |
| 1.3.6.1.4.1.29601.2.6.1.4.2 | TablefsQoSRandomDetectCfgTable | not-accessible | current | A table to configure parameters for Random Detect Algorithm. The table is Indexed by fsQoSQTemplateId and Drop Precedence (DP) (0 - 2). Each entry represent ra… |
| 1.3.6.1.4.1.29601.2.6.1.4.2.1 | RowfsQoSRandomDetectCfgEntry | not-accessible | current | Each entry in the table is a random drop Configuration. |
| 1.3.6.1.4.1.29601.2.6.1.4.2.1.1 | ColumnfsQoSRandomDetectCfgDP | not-accessible | current | The Drop Precedence [Drop Profile] 0 - low drop precedence[TCP Green Discard] 1 - medium drop precedence[TCP Yellow Discard] 2 - high drop precedence[TCP Red D… |
| 1.3.6.1.4.1.29601.2.6.1.4.2.1.2 | ColumnfsQoSRandomDetectCfgMinAvgThresh | read-write | current | The minimum average threshold for the random detect algorithm. Below this threshold, packets are admitted into the queue. The units are bits in accordance with… |
| 1.3.6.1.4.1.29601.2.6.1.4.2.1.3 | ColumnfsQoSRandomDetectCfgMaxAvgThresh | read-write | current | The maximum average threshold for the random detect algorithm. Above this threshold, packets are discarded before entering the queue. The units is bits in acco… |
| 1.3.6.1.4.1.29601.2.6.1.4.2.1.4 | ColumnfsQoSRandomDetectCfgMaxPktSize | read-write | current | Maximum allowed Packet Size. The units is bytes. |
| 1.3.6.1.4.1.29601.2.6.1.4.2.1.5 | ColumnfsQoSRandomDetectCfgMaxProb | read-write | current | Maximum probability of discarding a packet in units of percentage. |
| 1.3.6.1.4.1.29601.2.6.1.4.2.1.6 | ColumnfsQoSRandomDetectCfgExpWeight | read-write | current | The exponential Weight for determining the average queue size. |
| 1.3.6.1.4.1.29601.2.6.1.4.2.1.7 | ColumnfsQoSRandomDetectCfgStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. It can be deleted 'destroy', only if it is not referenced by o… |
| 1.3.6.1.4.1.29601.2.6.1.4.2.1.8 | ColumnfsQoSRandomDetectCfgGain | read-write | current | Gain defines an increase in drop-probability on each granular increase of buffer-occupancy due to received traffic. Determines the smoothing that should be app… |
| 1.3.6.1.4.1.29601.2.6.1.4.2.1.9 | ColumnfsQoSRandomDetectCfgDropThreshType | read-write | current | discardpackets(1) sets the WRED drop type to Discard packets. discardbytes(2) sets the WRED drop type to discard in terms of bytes. Value configured for fsQoSR… |
| 1.3.6.1.4.1.29601.2.6.1.4.2.1.10 | ColumnfsQoSRandomDetectCfgECNThresh | read-write | current | Defines the Queue depth in bytes to stop marking and start dropping ECN eligible packets |
| 1.3.6.1.4.1.29601.2.6.1.4.2.1.11 | ColumnfsQoSRandomDetectCfgActionFlag | read-write | current | This Object defines the additional action flags for the WRED profiles, Setting the flag to capavg(0) never lets the average queue size be bigger than the actua… |
| 1.3.6.1.4.1.29601.2.6.1.4.3 | TablefsQoSShapeTemplateTable | not-accessible | current | The shape template table configures the shaper attributes. |
| 1.3.6.1.4.1.29601.2.6.1.4.3.1 | RowfsQoSShapeTemplateEntry | not-accessible | current | Each entry in the table is a Shape Template Configuration. |
| 1.3.6.1.4.1.29601.2.6.1.4.3.1.1 | ColumnfsQoSShapeTemplateId | not-accessible | current | Shape Template Table Index. |
| 1.3.6.1.4.1.29601.2.6.1.4.3.1.2 | ColumnfsQoSShapeTemplateName | read-write | current | This the Name for a Shape template Entry. It should be unique in this Table. |
| 1.3.6.1.4.1.29601.2.6.1.4.3.1.3 | ColumnfsQoSShapeTemplateCIR | read-write | current | The committed information rate for packets through this queue. Must be > 0. |
| 1.3.6.1.4.1.29601.2.6.1.4.3.1.4 | ColumnfsQoSShapeTemplateCBS | read-write | current | The committed burst size for packets through this queue. Must be > 0 when CIR > 0. |
| 1.3.6.1.4.1.29601.2.6.1.4.3.1.5 | ColumnfsQoSShapeTemplateEIR | read-write | current | The Excess information rate for packets through this hierarchy. Must be >= 0. EIR must be greater than or equal to CIR, if EIR > 0. Currently not used, for fut… |
| 1.3.6.1.4.1.29601.2.6.1.4.3.1.6 | ColumnfsQoSShapeTemplateEBS | read-write | current | The excess burst size for packets through this hierarchy. Must be > 0 when EIR > 0. Currently not used, for future use. Agent returns EBS = 0 to represent that… |
| 1.3.6.1.4.1.29601.2.6.1.4.3.1.7 | ColumnfsQoSShapeTemplateStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. It can be deleted 'destroy', only if it is not referenced by o… |
| 1.3.6.1.4.1.29601.2.6.1.4.4 | TablefsQoSQMapTable | not-accessible | current | Queue MAP table mapping an egress port, CLASS of service to a queue. |
| 1.3.6.1.4.1.29601.2.6.1.4.4.1 | RowfsQoSQMapEntry | not-accessible | current | Q MAP Entry mapping a CLASS of service or RegenPriority from the fsQoSPolicyMapTable to a queue. |
| 1.3.6.1.4.1.29601.2.6.1.4.4.1.1 | ColumnfsQoSQMapCLASS | not-accessible | current | The input CLASS ( associated with an incoming packet) that needs to be mapped to an outbound queue. This is mutually exclusive to the RegenPriority object. CLA… |
| 1.3.6.1.4.1.29601.2.6.1.4.4.1.2 | ColumnfsQoSQMapRegenPriType | not-accessible | current | The regenerated-priority type to interpret the value of 'fsQoSQMapRegenPriority' object. This object should be none while configuring CLASS specific Queue. If … |
| 1.3.6.1.4.1.29601.2.6.1.4.4.1.3 | ColumnfsQoSQMapRegenPriority | not-accessible | current | The regenerated-priority ( for an incoming packet) that needs to be mapped to an outbound queue. This is mutually exclusive to the CLASS configuration. This ob… |
| 1.3.6.1.4.1.29601.2.6.1.4.4.1.4 | ColumnfsQoSQMapQId | read-write | current | The Queue Identifier that uniquely identifies a queue relative to an interface. It could be configured with a unique value in the system. |
| 1.3.6.1.4.1.29601.2.6.1.4.4.1.5 | ColumnfsQoSQMapStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active. It can be deleted/destroyed indepen… |
| 1.3.6.1.4.1.29601.2.6.1.4.4.1.6 | ColumnfsQoSQMapRegenDEI | read-write | current | This object specifies the Drop_eligible bit in the incoming frames. Either it can take false(0) or true (1). By default, drop_eligible bit is not set. |
| 1.3.6.1.4.1.29601.2.6.1.4.4.1.7 | ColumnfsQoSQMapRegenColor | read-only | current | This object specifies the regenerated color used in COSQ mapping. Administrator is not allowed to configure the color for Queue Mapping. This object will refle… |
| 1.3.6.1.4.1.29601.2.6.1.4.5 | TablefsQoSQTable | not-accessible | current | Table describing the queue parameters |
| 1.3.6.1.4.1.29601.2.6.1.4.5.1 | RowfsQoSQEntry | not-accessible | current | Q table entry |
| 1.3.6.1.4.1.29601.2.6.1.4.5.1.1 | ColumnfsQoSQId | not-accessible | current | The Queue Identifier that uniquely identifies the queue in the system/port. |
| 1.3.6.1.4.1.29601.2.6.1.4.5.1.2 | ColumnfsQoSQCfgTemplateId | read-write | current | The Queue template Id applied for configuring queue attributes. |
| 1.3.6.1.4.1.29601.2.6.1.4.5.1.3 | ColumnfsQoSQSchedulerId | read-write | current | The scheduler identifier that manages the specified queue. This identifier is unique relative to an egress interface. |
| 1.3.6.1.4.1.29601.2.6.1.4.5.1.4 | ColumnfsQoSQWeight | read-write | current | User assigned weight to the CoS queue. The assigned weights are used only when scheduling algorithm is a weighted scheduling algorithm. |
| 1.3.6.1.4.1.29601.2.6.1.4.5.1.5 | ColumnfsQoSQPriority | read-write | current | User assigned priority for the CoS queue. The assigned priority is used only when the scheduler uses a priority based scheduling algorithm. |
| 1.3.6.1.4.1.29601.2.6.1.4.5.1.6 | ColumnfsQoSQShapeId | read-write | current | The shaper identifier that specifies the bandwidth requirements for the queue. This object is not mandatory for the creation of the row. |
| 1.3.6.1.4.1.29601.2.6.1.4.5.1.7 | ColumnfsQoSQStatus | read-create | current | Row Status to Create/Destroy the entry. It can be deleted 'destroy', only if it is not referenced by other dependent tables; otherwise it returns inconsistentV… |
| 1.3.6.1.4.1.29601.2.6.1.4.5.1.8 | ColumnfsQoSQType | read-write | current | This object specifies the type of the queue. 1- Unicast queue 2- Multicast queue |
| 1.3.6.1.4.1.29601.2.6.1.4.6 | TablefsQoSSchedulerTable | not-accessible | current | Scheduler table |
| 1.3.6.1.4.1.29601.2.6.1.4.6.1 | RowfsQoSSchedulerEntry | not-accessible | current | Scheduler table Entry. |
| 1.3.6.1.4.1.29601.2.6.1.4.6.1.1 | ColumnfsQoSSchedulerId | not-accessible | current | The Scheduler Identifier that uniquely identifies the scheduler in the system/egress interface. |
| 1.3.6.1.4.1.29601.2.6.1.4.6.1.2 | ColumnfsQoSSchedulerSchedAlgorithm | read-write | current | Sets the packet scheduling algorithm for the port The default is strictPriority(1). |
| 1.3.6.1.4.1.29601.2.6.1.4.6.1.3 | ColumnfsQoSSchedulerShapeId | read-write | current | The shaper identifier that specifies the bandwidth requirements for the scheduler. This object is not mandatory for the creation of the conceptual row. |
| 1.3.6.1.4.1.29601.2.6.1.4.6.1.4 | ColumnfsQoSSchedulerHierarchyLevel | read-write | current | This indicates the depth of the queue/scheduler hierarchy. A value of 0 indicates that there is no hierarchy and that all queues/schedulers are port-bound. 0 -… |
| 1.3.6.1.4.1.29601.2.6.1.4.6.1.5 | ColumnfsQoSSchedulerGlobalId | read-write | current | The Scheduler Identifier that uniquely identifies the scheduler in the system/egress interface.This object is used only for creating Scheduler entry from the s… |
| 1.3.6.1.4.1.29601.2.6.1.4.6.1.6 | ColumnfsQoSSchedulerStatus | read-create | current | Row Status to Create/Destroy the entry. It can be deleted 'destroy', only if it is not referenced by other table; otherwise return inconsistentValue error. |
| 1.3.6.1.4.1.29601.2.6.1.4.7 | TablefsQoSHierarchyTable | not-accessible | current | Hierarchy table for specifying the hierarchy details. |
| 1.3.6.1.4.1.29601.2.6.1.4.7.1 | RowfsQoSHierarchyEntry | not-accessible | current | Each entry specifies the queue/scheduler details to be used for the next level hierarchy. The interface index associated with the NextQ or Next Scheduler is ob… |
| 1.3.6.1.4.1.29601.2.6.1.4.7.1.1 | ColumnfsQoSHierarchyLevel | not-accessible | current | This indicates the depth of the queue/scheduler hierarchy. A value of 0 indicates that there is no hierarchy and that all queues/schedulers are port-bound. |
| 1.3.6.1.4.1.29601.2.6.1.4.7.1.2 | ColumnfsQoSHierarchyQNext | read-write | current | The output of this COSQ is sent to the scheduler attached to the queue. For eg., A packet may flow from a cosq to the schedulers in the following way: COSQ => … |
| 1.3.6.1.4.1.29601.2.6.1.4.7.1.3 | ColumnfsQoSHierarchySchedNext | read-write | current | The next-level scheduler to which the scheduler output needs to be sent. The value of this object could be unique in the system/port. A valid value is not mand… |
| 1.3.6.1.4.1.29601.2.6.1.4.7.1.4 | ColumnfsQoSHierarchyWeight | read-write | current | The Weight is specified if the Scheduler is connecting to a WFQ of another Scheduler. Agent returns Weight = 0 to represent that this object is not configured … |
| 1.3.6.1.4.1.29601.2.6.1.4.7.1.5 | ColumnfsQoSHierarchyPriority | read-write | current | The Scheduler can connect to any of the Priority of the next-level Scheduler. The priority is specified when the scheduler is connecting to any of the prioriti… |
| 1.3.6.1.4.1.29601.2.6.1.4.7.1.6 | ColumnfsQoSHierarchyStatus | read-create | current | Row Status to Create/Destroy the entry. It can be deleted 'destroy', only if it is not referenced by other table; otherwise return inconsistentValue error. |
| 1.3.6.1.4.1.29601.2.6.1.4.8 | TablefsQoSDefUserPriorityTable | not-accessible | current | A table that contains default user priority for an interfae. |
| 1.3.6.1.4.1.29601.2.6.1.4.8.1 | RowfsQoSDefUserPriorityEntry | not-accessible | current | Table for configuring default user priority for each port. This is used for assigning priority to the untagged packets received on the interface. |
| 1.3.6.1.4.1.29601.2.6.1.4.8.1.1 | ColumnfsQoSPortDefaultUserPriority | read-write | current | The default ingress user priority for this port. It will be used to set priority for an untagged Packets. |
| 1.3.6.1.4.1.29601.2.6.1.4.8.1.2 | ColumnfsQoSPortPbitPrefOverDscp | read-write | current | Specifies the default QoS remarking (trust) mode for a port. |
| 1.3.6.1.4.1.29601.2.6.1.4.8.1.3 | ColumnfsQoSPortPbitPrefOverDscpStatic | read-only | current | Specifies the default QoS remarking (trust) mode for a port. This object represents the static P-Bit Preference Over DSCP value. When the fsQoSPortPbitPrefOver… |
| 1.3.6.1.4.1.29601.2.6.1.5 | NodefsQoSStats | |||
| 1.3.6.1.4.1.29601.2.6.1.5.1 | TablefsQoSPolicerStatsTable | not-accessible | current | A list of Policer Statistics. |
| 1.3.6.1.4.1.29601.2.6.1.5.1.1 | RowfsQoSPolicerStatsEntry | not-accessible | current | A collection of statistics kept for a particular Policer. |
| 1.3.6.1.4.1.29601.2.6.1.5.1.1.1 | ColumnfsQoSPolicerStatsConformPkts | read-only | current | Number of Packets marked down as conforming(Green) traffic by this policer. |
| 1.3.6.1.4.1.29601.2.6.1.5.1.1.2 | ColumnfsQoSPolicerStatsConformOctets | read-only | current | Number of Octets of traffic marked down as conforming(Green) by this policer. |
| 1.3.6.1.4.1.29601.2.6.1.5.1.1.3 | ColumnfsQoSPolicerStatsExceedPkts | read-only | current | Number of Packets marked down as exceeding(Yellow) traffic by this policer. |
| 1.3.6.1.4.1.29601.2.6.1.5.1.1.4 | ColumnfsQoSPolicerStatsExceedOctets | read-only | current | Number of Octets of traffic marked down as exceeding(Yellow) by this policer. |
| 1.3.6.1.4.1.29601.2.6.1.5.1.1.5 | ColumnfsQoSPolicerStatsViolatePkts | read-only | current | Number of Packets marked down as violating(Red) traffic by this policer. |
| 1.3.6.1.4.1.29601.2.6.1.5.1.1.6 | ColumnfsQoSPolicerStatsViolateOctets | read-only | current | Number of Octets of traffic marked down as violating(Red) by this policer. |
| 1.3.6.1.4.1.29601.2.6.1.5.1.1.7 | ColumnfsQoSPolicerStatsStatus | read-write | current | Status indicating the Policer Statistics is being Enabled/Disabled for the specific meter. When statistics collection is set to disabled, stops collecting stat… |
| 1.3.6.1.4.1.29601.2.6.1.5.1.1.8 | ColumnfsQoSPolicerStatsClearCounter | read-write | current | Resets all the counter variables to initialization value (zero). |
| 1.3.6.1.4.1.29601.2.6.1.5.2 | TablefsQoSCoSQStatsTable | not-accessible | current | A list of class-of-service based Queue Statistics for a COS Queue. |
| 1.3.6.1.4.1.29601.2.6.1.5.2.1 | RowfsQoSCoSQStatsEntry | not-accessible | current | A collection of CoS Queue statistics for a particular COS queue. |
| 1.3.6.1.4.1.29601.2.6.1.5.2.1.1 | ColumnfsQoSCoSQId | not-accessible | current | The COSQ for which the statistics is being collected. |
| 1.3.6.1.4.1.29601.2.6.1.5.2.1.2 | ColumnfsQoSCoSQStatsEnQPkts | read-only | current | Number of packets enqueued in this CoS Queue. |
| 1.3.6.1.4.1.29601.2.6.1.5.2.1.3 | ColumnfsQoSCoSQStatsEnQBytes | read-only | current | Number of bytes enqueued in this CoS Queue. |
| 1.3.6.1.4.1.29601.2.6.1.5.2.1.4 | ColumnfsQoSCoSQStatsDeQPkts | read-only | current | Number of packets de-queued from this CoS Queue. |
| 1.3.6.1.4.1.29601.2.6.1.5.2.1.5 | ColumnfsQoSCoSQStatsDeQBytes | read-only | current | Number of bytes de-queued from this CoS Queue. |
| 1.3.6.1.4.1.29601.2.6.1.5.2.1.6 | ColumnfsQoSCoSQStatsDiscardPkts | read-only | current | Number of packets discarded from this CoS Queue. |
| 1.3.6.1.4.1.29601.2.6.1.5.2.1.7 | ColumnfsQoSCoSQStatsDiscardBytes | read-only | current | Number of bytes discarded from this CoS Queue. |
| 1.3.6.1.4.1.29601.2.6.1.5.2.1.8 | ColumnfsQoSCoSQStatsOccupancy | read-only | current | Number of bytes currently occupied in the CoS Queue. |
| 1.3.6.1.4.1.29601.2.6.1.5.2.1.9 | ColumnfsQoSCoSQStatsCongMgntAlgoDrop | read-only | current | Number of bytes discarded due to congestion management algorithm (RED/WRED) in this CoS Queue. |
| 1.3.6.1.4.1.29601.2.6.1.6 | NodefsQosHwCpuRateControl | |||
| 1.3.6.1.4.1.29601.2.6.1.6.1 | TablefsQosHwCpuRateLimitTable | not-accessible | current | Table describing the queue parameters for CPU port |
| 1.3.6.1.4.1.29601.2.6.1.6.1.1 | RowfsQosHwCpuRateLimitEntry | not-accessible | current | CPU Rate Limit table entry |
| 1.3.6.1.4.1.29601.2.6.1.6.1.1.1 | ColumnfsQosHwCpuQId | not-accessible | current | The Queue Identifier that uniquely identifies the queue in the system/port. |
| 1.3.6.1.4.1.29601.2.6.1.6.1.1.2 | ColumnfsQosHwCpuMinRate | read-write | current | This object controls the minimum transmission rate on a cpu port. Min Rate must be less than or equal to Max Rate. |
| 1.3.6.1.4.1.29601.2.6.1.6.1.1.3 | ColumnfsQosHwCpuMaxRate | read-write | current | This object controls the maximum transmission rate on a cpu port. Max Rate must be greater than or equal to Min Rate. |
| 1.3.6.1.4.1.29601.2.6.1.6.1.1.4 | ColumnfsQosHwCpuRowStatus | read-create | current | This object indicates the status of this entry. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Dscp | Integer32 (0..63) | current | A Differentiated Services Code-Point that may be used for marking a traffic stream. |
| EnableStatus | INTEGER { enable(1), disable(2) } | current | A textual convention to Enable or Disable a MIB contruct. |
| IndexInteger | Unsigned32 (0..65535) | current | An integer which may be used as a table index. If 0 then it is invalid |
| MeterColorMode | INTEGER { colorAware(1), colorBlind(2) } | current | Enums to indicate the color mode of the Meter colorAware - the Meter will also consider the Pre-Color of the Packet colorBlind - the Meter will ignore the Pre-Color of the Packet |
| MeterType | INTEGER { simpleTokenBucket(1), avgRate(2), srTCM(3), trTCM(4), tswTCM(5), mefDecoupledMeter(6), mefCoupledMeter(7) } | current | Enums to indicate the meter type : SimpleTokenBucket - Two Parameter Token Bucket Meter as described in the Informal Differentiated Services Model section 5.2.3. AvgRate - Average Rate Meter as described in the Informal… |
| SchedulerPriority | Integer32 (0..15) | current | Scheduler Priority which a flow should fall in. |