ARICENT-ECFM-Y1731-MI-MIB
381 objects
The Proprietary MIB for ECFM-Y1731 module with multiple instance capability
Imported Objects
| IEEE8021-CFM-MIB | Dot1agCfmMDLevelOrNone Dot1agCfmMepId Dot1agCfmMepIdOrZero |
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowPointer RowStatus TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.7 | IdentityfsMIY1731MIB | The Proprietary MIB for ECFM-Y1731 module with multiple instance capability | ||
| 1.3.6.1.4.1.29601.2.7.0 | NodefsMIY1731Notifications | |||
| 1.3.6.1.4.1.29601.2.7.0.1 | NotificationfsMIY1731FrameLossTrap | current | This object specifies the MEP that can measure frame-loss. A notification is sent to the management entity with the OID of the MEP that has measured frame-loss… | |
| 1.3.6.1.4.1.29601.2.7.0.2 | NotificationfsMIY1731DefectConditionTrap | current | This object specifies the a MEP having a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP tha… | |
| 1.3.6.1.4.1.29601.2.7.0.3 | NotificationfsMIY1731TstRecivedWithErrorTrap | current | This object specifies the MEP that has received a TST PDU and the validation criteria has failed A notification is sent to the management entity with the OID o… | |
| 1.3.6.1.4.1.29601.2.7.0.4 | NotificationfsMIY1731FrameDelayTrap | current | This object specifies the MEP that can measure iframe-delay. A notification is sent to the management entity with the OID of the MEP that has measured frame-de… | |
| 1.3.6.1.4.1.29601.2.7.0.5 | NotificationfsMIY1731TxFailTrap | current | This object is used to warn the system administrator when there is CFM Tx Failure occurred. The management entity receiving the notification can identify the s… | |
| 1.3.6.1.4.1.29601.2.7.1 | NodefsMIY1731MIBObjects | |||
| 1.3.6.1.4.1.29601.2.7.1.1 | NodefsMIY1731System | |||
| 1.3.6.1.4.1.29601.2.7.1.1.1 | TablefsMIY1731PortTable | not-accessible | current | This object specifies ECFM information specific to interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1 | RowfsMIY1731PortEntry | not-accessible | current | This object specifies Each entry in this table is for each interface present in the system. This table is indexed by the fsMIY1731PortIfIndex |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.1 | ColumnfsMIY1731PortIfIndex | not-accessible | current | This object specifies the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.2 | ColumnfsMIY1731PortAisOut | read-write | current | This object specifies the Number of AIS PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.3 | ColumnfsMIY1731PortAisIn | read-write | current | This object specifies the Number of AIS PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.4 | ColumnfsMIY1731PortLckOut | read-write | current | This object specifies the Number of LCK PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.5 | ColumnfsMIY1731PortLckIn | read-write | current | This object specifies the Number of LCK PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.6 | ColumnfsMIY1731PortTstOut | read-write | current | This object specifies the Number of TST PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.7 | ColumnfsMIY1731PortTstIn | read-write | current | This object specifies the Number of TST PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.8 | ColumnfsMIY1731PortLmmOut | read-write | current | This object specifies the Number of LMM PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.9 | ColumnfsMIY1731PortLmmIn | read-write | current | This object specifies the Number of LMM PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.10 | ColumnfsMIY1731PortLmrOut | read-write | current | This object specifies the Number of LMR PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.11 | ColumnfsMIY1731PortLmrIn | read-write | current | This object specifies the Number of LMR PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.12 | ColumnfsMIY1731Port1DmOut | read-write | current | This object specifies the Number of 1DM PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.13 | ColumnfsMIY1731Port1DmIn | read-write | current | This object specifies the Number of 1DM PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.14 | ColumnfsMIY1731PortDmmOut | read-write | current | This object specifies the Number of DMM PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.15 | ColumnfsMIY1731PortDmmIn | read-write | current | This object specifies the Number of DMM PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.16 | ColumnfsMIY1731PortDmrOut | read-write | current | This object specifies the Number of DMR PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.17 | ColumnfsMIY1731PortDmrIn | read-write | current | This object specifies the Number of DMR PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.18 | ColumnfsMIY1731PortApsOut | read-write | current | This object specifies the Number of APS PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.19 | ColumnfsMIY1731PortApsIn | read-write | current | This object specifies the Number of APS PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.20 | ColumnfsMIY1731PortMccOut | read-write | current | This object specifies the Number of MCC PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.21 | ColumnfsMIY1731PortMccIn | read-write | current | This object specifies the Number of MCC PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.22 | ColumnfsMIY1731PortVsmOut | read-write | current | This object specifies the Number of VSM PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.23 | ColumnfsMIY1731PortVsmIn | read-write | current | This object specifies the Number of VSM PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.24 | ColumnfsMIY1731PortVsrOut | read-write | current | This object specifies the Number of VSR PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.25 | ColumnfsMIY1731PortVsrIn | read-write | current | This object specifies the Number of VSR PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.26 | ColumnfsMIY1731PortExmOut | read-write | current | This object specifies the Number of EXM PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.27 | ColumnfsMIY1731PortExmIn | read-write | current | This object specifies the Number of EXM PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.28 | ColumnfsMIY1731PortExrOut | read-write | current | This object specifies the Number of EXR PDUs transmitted by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.29 | ColumnfsMIY1731PortExrIn | read-write | current | This object specifies the Number of EXR PDUs received by this interface. |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.30 | ColumnfsMIY1731PortOperStatus | read-write | current | This object specifies the administrative module status of Ethernet Y1731 functionality. This enables or disables Y1731 in the system. If set to enable, enables… |
| 1.3.6.1.4.1.29601.2.7.1.1.1.1.31 | ColumnfsMIY1731LastTxFailOpcode | read-only | current | This object specifies the Opcode value of Last Tx Failure CFM PDU. When CFM PDU is not transmitted from system due to system failure then CFM PDU Tx failure tr… |
| 1.3.6.1.4.1.29601.2.7.1.2 | NodefsMIY1731Context | |||
| 1.3.6.1.4.1.29601.2.7.1.2.1 | TablefsMIY1731ContextTable | not-accessible | current | This object specifies the List of per virtual context ECFM-Y1731 Module Parameters. |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1 | RowfsMIY1731ContextEntry | not-accessible | current | This object specifies the Per virtual context ECFM-Y1731 module parmaters. |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.1 | ColumnfsMIY1731ContextId | not-accessible | current | This object specifies the virtual context in the system. |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.2 | ColumnfsMIY1731ContextName | read-only | current | This object specifies the Name of the virtual context. |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.3 | ColumnfsMIY1731FrameLossBufferClear | read-write | current | This object specifies the Trigger to remove the contents of Buffer maintained for storing frame-loss measured at various times. Note: Get operation value shoul… |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.4 | ColumnfsMIY1731FrameDelayBufferClear | read-write | current | This object specifies the Trigger to remove the contents of Buffer maintained for storing frame-delay measured at various times. Note: Get operation value shou… |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.5 | ColumnfsMIY1731LbrCacheClear | read-write | current | This object specifies the Trigger to remove the contents of loopback cache maintained for storing loop back replies. Note: Get operation value should be ignore… |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.6 | ColumnfsMIY1731ErrorLogClear | read-write | current | This object specifies the Trigger to remove the contents of continuity check error log maintained to store continuity check errors detected by MEP. Note: Get o… |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.7 | ColumnfsMIY1731FrameLossBufferSize | read-write | current | This object specifies the Maximum size (in entries) of the Frame Loss Buffer. |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.8 | ColumnfsMIY1731FrameDelayBufferSize | read-write | current | This object specifies the Maximum number of entries for the Frame Delay Buffer |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.9 | ColumnfsMIY1731LbrCacheSize | read-write | current | This object specifies the Maximum number of entries for the loopback replies (LBR) Cache |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.10 | ColumnfsMIY1731LbrCacheHoldTime | read-write | current | This object specifies the Time (in minutes) for which loopback replies (LBR) cache table entries are retained. |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.11 | ColumnfsMIY1731TrapControl | read-write | current | This object specifies a vector of Boolean notification types, used to enable or disable the Y1731 notification types: bTrapBadPduReceived bTrapFrameLoss bTrapF… |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.12 | ColumnfsMIY1731ErrorLogStatus | read-write | current | This object specifies the administrative status of Error Log. This enables or disables the logging of errors or defects detected by MEP. |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.13 | ColumnfsMIY1731ErrorLogSize | read-write | current | This object specifies the Maximum number of entries for the Error Log, only if fsMIY1731ErrorLogStatus is enabled. |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.14 | ColumnfsMIY1731OperStatus | read-write | current | This object specifies the administrative module status of Ethernet Y1731 functionality in CFM module. This enables or disables Y1731 in the system. A value of … |
| 1.3.6.1.4.1.29601.2.7.1.2.1.1.15 | ColumnfsMIY1731LbrCacheStatus | read-write | current | This object specifies the administrative status of LBR cache. This enables or disables caching of LBRs |
| 1.3.6.1.4.1.29601.2.7.1.2.2 | TablefsMIY1731MegTable | not-accessible | current | This object specifies the Maintenance Entity Group table. Each row in the table represents a different Maintenance Entity Group. A Maintenance Entity Group is … |
| 1.3.6.1.4.1.29601.2.7.1.2.2.1 | RowfsMIY1731MegEntry | not-accessible | current | This object specifies the Maintenance Entity Group table entry. This entry is not lost upon reboot. It is backed up by stable storage. |
| 1.3.6.1.4.1.29601.2.7.1.2.2.1.1 | ColumnfsMIY1731MegIndex | not-accessible | current | This object specifies the index to the Maintenance Entity Group table. |
| 1.3.6.1.4.1.29601.2.7.1.2.2.1.2 | ColumnfsMIY1731MegClientMEGLevel | read-write | current | This object specifies the MEG Level at which the most immediate client layer MEPs or MIPs exist. The value (-1) is reserved to indicate that no client MEG leve… |
| 1.3.6.1.4.1.29601.2.7.1.2.2.1.3 | ColumnfsMIY1731MegVlanPriority | read-write | current | This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. Applicable to all ECFM-Y1731 frames transmitte… |
| 1.3.6.1.4.1.29601.2.7.1.2.2.1.4 | ColumnfsMIY1731MegDropEnable | read-write | current | This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted CFM frame. Applicable to all ECFM-Y1731 frames transm… |
| 1.3.6.1.4.1.29601.2.7.1.2.2.1.5 | ColumnfsMIY1731MegRowStatus | read-write | current | This object specifies the status of MEG row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before … |
| 1.3.6.1.4.1.29601.2.7.1.2.3 | TablefsMIY1731MeTable | not-accessible | current | This object specifies the Maintenance Entity table. Each row in the table represents an ME. An ME represents a relationship between two MEPs, each configured w… |
| 1.3.6.1.4.1.29601.2.7.1.2.3.1 | RowfsMIY1731MeEntry | not-accessible | current | This object specifies the ME table entry. |
| 1.3.6.1.4.1.29601.2.7.1.2.3.1.1 | ColumnfsMIY1731MeIndex | not-accessible | current | This object specifies the Index of the ME table. |
| 1.3.6.1.4.1.29601.2.7.1.2.3.1.2 | ColumnfsMIY1731MeCciEnabled | read-write | current | This object specifies the If set to true, all MEPs in the ME will generate CCM messages. |
| 1.3.6.1.4.1.29601.2.7.1.2.3.1.3 | ColumnfsMIY1731MeCcmApplication | read-write | current | This object specifies an enumerated value indicating the ETH-CC Role. Note: Performance Monitoring is applicable only for point-to-point Maintenance Entity (ME… |
| 1.3.6.1.4.1.29601.2.7.1.2.3.1.4 | ColumnfsMIY1731MeMegIdIcc | read-write | current | This object specifies the Unique code assigned to Network Operator or Service Provider maintained by ITU-T Telecommunication Standardization Bureau. The ITU Ca… |
| 1.3.6.1.4.1.29601.2.7.1.2.3.1.5 | ColumnfsMIY1731MeMegIdUmc | read-write | current | This object specifies the Unique code assigned by Network Operator or Service Provider and is appended to fsMIY1731MeMegIdIcc to form the MEGID The unique MEGI… |
| 1.3.6.1.4.1.29601.2.7.1.2.3.1.6 | ColumnfsMIY1731MeRowStatus | read-write | current | This object specifies the status of ME row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a… |
| 1.3.6.1.4.1.29601.2.7.1.2.4 | TablefsMIY1731MepTable | not-accessible | current | This object specifies the Maintenance Entity Group End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM en… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1 | RowfsMIY1731MepEntry | not-accessible | current | This object specifies the MEP table entry |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.1 | ColumnfsMIY1731MepIdentifier | not-accessible | current | This object specifies the Integer that is unique among all the MEPs in the same ME. Other definition is: a small integer, unique over a given Maintenance Entit… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.2 | ColumnfsMIY1731MepOutOfService | read-write | current | This object specifies a Boolean indicating the administrative service that is being or to be performed. true indicates operation needs to be performed Out-of-s… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.3 | ColumnfsMIY1731MepRdiCapability | read-write | current | This object specifies the administrative status of RDI Transmission capability. This enables or disables the transmission of RDI bit in the CCM PDU by the MEP.… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.4 | ColumnfsMIY1731MepRdiPeriod | read-write | current | This object specifies the Time (in seconds) for which RDI Capability (fsMIY1731MepRdiCapability) is enabled. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.5 | ColumnfsMIY1731MepCcmDropEnable | read-write | current | This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted CCM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.6 | ColumnfsMIY1731MepCcmPriority | read-write | current | This object is used to configure CCM Priority for the Ethernet and the MPLS-TP (LSP/PW) based MEPs. For Ethernet: The Priority is a 3-bit priority value to be … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.7 | ColumnfsMIY1731MepMulticastLbmRecvCapability | read-write | current | This object specifies the administrative status of Multicast LBM frame reception. This enables or disables the capability of MEP to process the multicast LBM. … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.8 | ColumnfsMIY1731MepLoopbackCapability | read-write | current | This object specifies the administrative status of Loopback (ping) capability. This enables or disables capability of MEP to initiate and process Loopback (pin… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.9 | ColumnfsMIY1731MepLbmCurrentTransId | read-only | current | This object specifies the current LBM Transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.10 | ColumnfsMIY1731MepTransmitLbmStatus | read-write | current | This object specifies an Enumerated value set to 'start' to initiate LBM transmission and 'stop' to stop LBM transmission. 'ready' and 'notReady' indicates whe… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.11 | ColumnfsMIY1731MepTransmitLbmResultOK | read-only | current | This object specifies the result of LBM transaction, - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sen… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.12 | ColumnfsMIY1731MepTransmitLbmDestMacAddress | read-write | current | This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column f… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.13 | ColumnfsMIY1731MepTransmitLbmDestMepId | read-write | current | This object specifies the Maintenance association End Point Identifier of another MEP in the same Maintenance Entity to which the LBM is to be sent. This addre… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.14 | ColumnfsMIY1731MepTransmitLbmDestType | read-write | current | This object specifies the Lbm Destination Type i.e. Unicast, MepID, Multicast or MipId(MIP Id applicable only for MPLS-TP network). |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.15 | ColumnfsMIY1731MepTransmitLbmMessages | read-write | current | This object specifies the number of Loopback messages to be transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.16 | ColumnfsMIY1731MepTransmitLbmInterval | read-write | current | This object specifies the Interval between two successive LBM transmissions to be used by the MEP. fsMIY1731MepTransmitLbmIntervalType are used as units for th… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.17 | ColumnfsMIY1731MepTransmitLbmIntervalType | read-write | current | This object specifies the Units of fsMIY1731MepTransmitLbmInterval to be used by the MEP for LBM transmission. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.18 | ColumnfsMIY1731MepTransmitLbmDeadline | read-write | current | This object Specifies a timeout, in seconds, before loopback (ping) exits. Loopback (ping) exits, if configured number of messages fsMIY1731MepTransmitLbmMessa… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.19 | ColumnfsMIY1731MepTransmitLbmDropEnable | read-write | current | This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LBM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.20 | ColumnfsMIY1731MepTransmitLbmPriority | read-write | current | This object is used to configure LBM Priority for the Ethernet and the MPLS-TP (LSP/PW) based MEPs. For Ethernet: The Priority is a 3-bit priority value to be … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.21 | ColumnfsMIY1731MepTransmitLbmVariableBytes | read-write | current | This object specifies a varying number of data bytes is to be transmitted in the LBM. 'true' indicates that LBMs to be transmitted are with varying bytes of da… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.22 | ColumnfsMIY1731MepTransmitLbmTlvType | read-write | current | This object specifies the type of the TLV to be included in the LBM frame, if required to be send. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.23 | ColumnfsMIY1731MepTransmitLbmDataPattern | read-write | current | This object specifies an arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent, determined by the fsMIY1731MepTransmi… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.24 | ColumnfsMIY1731MepTransmitLbmDataPatternSize | read-write | current | This object specifies the size (bytes) of the pattern(fsMIY1731MepTransmitLbmDataPatterm) to be included in the Data TLV, if the Data TLV is to be included in … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.25 | ColumnfsMIY1731MepTransmitLbmTestPatternType | read-write | current | This object specifies the type of pattern to be included in the test TLV of the LBM, if the Test TLV is selected to be sent. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.26 | ColumnfsMIY1731MepTransmitLbmTestPatternSize | read-write | current | This object specifies the size of the pattern to be included in the Test TLV, if the Test TLV is selected to be sent. Maximum frame size supported by ECFM is 9… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.27 | ColumnfsMIY1731MepTransmitLbmSeqNumber | read-only | current | This object specifies the sequence number to be transmitted in the next LBM. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.28 | ColumnfsMIY1731MepBitErroredLbrIn | read-write | current | This object specifies the number of bit-errored LBRs received. LBR with different pattern as of Test TLV in the sent LBM is considered as bit-errored LBR |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.29 | ColumnfsMIY1731MepTransmitLtmStatus | read-write | current | This object specifies a Enumerated value set to 'transmit' to initiate LTM transmission. 'ready' and 'notReady' indicates whether LTM can be initiated or not. … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.30 | ColumnfsMIY1731MepTransmitLtmResultOK | read-only | current | This object specifies the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.31 | ColumnfsMIY1731MepTransmitLtmFlags | read-write | current | This object specifies the flags field for LTMs transmitted by the MEP. Indicates that only MAC address learned in bridge's forwarding tables is to be used to f… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.32 | ColumnfsMIY1731MepTransmitLtmTargetMacAddress | read-write | current | This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column f… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.33 | ColumnfsMIY1731MepTransmitLtmTargetMepId | read-write | current | This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the s… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.34 | ColumnfsMIY1731MepTransmitLtmTargetIsMepId | read-write | current | This object specifies True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of t… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.35 | ColumnfsMIY1731MepTransmitLtmTtl | read-write | current | This object specifies the LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented b… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.36 | ColumnfsMIY1731MepTransmitLtmDropEnable | read-write | current | This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LTM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.37 | ColumnfsMIY1731MepTransmitLtmPriority | read-write | current | This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LTM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.38 | ColumnfsMIY1731MepTransmitLtmSeqNumber | read-only | current | This object specifies the sequence number to be transmitted in next LBM. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.39 | ColumnfsMIY1731MepTransmitLtmTimeout | read-write | current | This object specifies the Time for all the replies (LTR) of a LTM to be received by the MEP.No reply (LTR) would be entertained thereafter (timeout). |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.40 | ColumnfsMIY1731MepMulticastTstRecvCapability | read-write | current | This object specifies the administrative status of multicast TST frame reception. This enables or disables the capability of MEP to process the multicast TST. … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.41 | ColumnfsMIY1731MepTransmitTstPatternType | read-write | current | This object specifies the type of the pattern to be included in the test TLV of TST frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.42 | ColumnfsMIY1731MepTransmitTstVariableBytes | read-write | current | This object specifies a varying number of data bytes to send in the TST. True indicates that TSTs are to be send with varying bytes of data and False indicates… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.43 | ColumnfsMIY1731MepTransmitTstPatternSize | read-write | current | This object specifies the size of the pattern to be included in the Test TLV of the TST message. Maximum frame size supported by ECFM is 9K, following is the c… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.44 | ColumnfsMIY1731MepTransmitTstDestType | read-write | current | This object specifies the TST Destination Types (unicast,MEPID,Multicast) |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.45 | ColumnfsMIY1731MepTransmitTstDestMacAddress | read-write | current | This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column f… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.46 | ColumnfsMIY1731MepTransmitTstDestMepId | read-write | current | This object specifies the Maintenance Entity Group End Point Identifier of another MEP in the same Maintenance Association to which the TST is to be sent. This… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.47 | ColumnfsMIY1731MepTransmitTstSeqNumber | read-only | current | This object specifies the Sequence number to be sent in the TST message. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.48 | ColumnfsMIY1731MepTransmitTstPriority | read-write | current | This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted TST frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.49 | ColumnfsMIY1731MepTransmitTstDropEnable | read-write | current | This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted TST frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.50 | ColumnfsMIY1731MepTransmitTstMessages | read-write | current | This object specifies the number of Test messages to be transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.51 | ColumnfsMIY1731MepTransmitTstStatus | read-write | current | This object specifies an Enumerated value set to 'start' to initiate TST transmission and 'stop' to stop TST transmission. 'ready' and 'notReady' indicates whe… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.52 | ColumnfsMIY1731MepTransmitTstResultOK | read-only | current | This object specifies the result of the operation: - true The Test Message(s) will be (or has been) sent. - false The Test Message(s) will not be sent. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.53 | ColumnfsMIY1731MepTransmitTstInterval | read-write | current | This object specifies the Interval between two successive TST transmissions to be used by the MEP. fsMIY1731MepTransmitTstIntervalType is used as units for thi… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.54 | ColumnfsMIY1731MepTransmitTstIntervalType | read-write | current | This object specifies the Units of fsMIY1731MepTransmitTstInterval to be used by the MEP for TSTs transmission. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.55 | ColumnfsMIY1731MepTransmitTstDeadline | read-write | current | This object specifies the Specify a timeout(in seconds), before test exits. Test exits, if configured number of messages are sent before timeout. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.56 | ColumnfsMIY1731MepBitErroredTstIn | read-write | current | This object specifies the number of bit-errored TST messages received. Reception of invalid TST message is considered as bit-errored TST messages. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.57 | ColumnfsMIY1731MepValidTstIn | read-write | current | This object specifies the Number of valid TST messages received. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.58 | ColumnfsMIY1731MepTstOut | read-write | current | This object specifies the Number of TST messages transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.59 | ColumnfsMIY1731MepTransmitLmmStatus | read-write | current | This object specifies an Enumerated value set to 'start' to initiate LM transmission and 'stop' to stop LM transmission. 'ready' and 'notReady' indicates wheth… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.60 | ColumnfsMIY1731MepTransmitLmmResultOK | read-only | current | This object specifies the result of the operation: - true The Loss measurement Message (LMM) will be (or has been) sent. - false The Loss measurement Message (… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.61 | ColumnfsMIY1731MepTransmitLmmInterval | read-write | current | This object specifies the Interval between two successive LMM transmissions to be used by the MEP. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.62 | ColumnfsMIY1731MepTransmitLmmDeadline | read-write | current | This object specifies a timeout, in seconds, before loss measurement exits. Loss Measurement exits, if configured number of messages are sent before timeout. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.63 | ColumnfsMIY1731MepTransmitLmmDropEnable | read-write | current | This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.64 | ColumnfsMIY1731MepTransmitLmmPriority | read-write | current | This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.65 | ColumnfsMIY1731MepTransmitLmmDestMacAddress | read-write | current | This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for LMM. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.66 | ColumnfsMIY1731MepTransmitLmmDestMepId | read-write | current | This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the s… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.67 | ColumnfsMIY1731MepTransmitLmmDestIsMepId | read-write | current | This object specifies the True indicates that MEPID of the target MEP is used for LM frame transmission. False indicates that unicast destination MAC address o… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.68 | ColumnfsMIY1731MepTransmitLmmMessages | read-write | current | This object specifies the number of LMM messages to be transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.69 | ColumnfsMIY1731MepTxFCf | read-only | current | This object specifies the counter of in-profile data frames transmitted towards its peer MEP transmitted in the last CCM or LMM. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.70 | ColumnfsMIY1731MepRxFCb | read-only | current | This object specifies the counter of in-profile data frames received from its peer MEP at the time of receiving the last CCM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.71 | ColumnfsMIY1731MepTxFCb | read-only | current | This object specifies the value of fsMIY1731MepTxFCf field in the last CCM or LMR frame received from its peer MEP. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.72 | ColumnfsMIY1731MepNearEndFrameLossThreshold | read-write | current | This object specifies the Threshold value for the near-end frame loss. Notification is sent to Management Application if calculated near-end frame loss exceeds… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.73 | ColumnfsMIY1731MepFarEndFrameLossThreshold | read-write | current | This object specifies the Threshold value for the far-end frame loss. Notification is sent to Management Application if calculated far-end frame loss exceeds c… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.74 | ColumnfsMIY1731MepTransmitDmStatus | read-write | current | This object specifies an Enumerated value set to 'start' to initiate 1DM or DMM transmission and 'stop' to stop 1DM or DMM transmission. 'ready' and 'notReady'… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.75 | ColumnfsMIY1731MepTransmitDmResultOK | read-only | current | This object specifies the Indicates the result of the operation: - true The Delay measurement Message (1DM or DMM) will be (or has been) sent. - false The Dela… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.76 | ColumnfsMIY1731MepTransmitDmType | read-write | current | This object specifies the Type of delay measurement to be initiated: - oneWay(1) Measurement (by 1DM) is calculated at destination end. - twoWay(2) Measurement… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.77 | ColumnfsMIY1731MepTransmitDmInterval | read-write | current | This object specifies the Interval between two successive DM messages (1DM or DMM) transmissions to be used by the MEP. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.78 | ColumnfsMIY1731MepTransmitDmMessages | read-write | current | This object specifies the number of DM (1DM or DMM) messages to be transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.79 | ColumnfsMIY1731MepTransmitDmmDropEnable | read-write | current | This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted DMM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.80 | ColumnfsMIY1731MepTransmit1DmDropEnable | read-write | current | This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted 1DM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.81 | ColumnfsMIY1731MepTransmitDmmPriority | read-write | current | This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted DMM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.82 | ColumnfsMIY1731MepTransmit1DmPriority | read-write | current | This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted 1DM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.83 | ColumnfsMIY1731MepTransmitDmDestMacAddress | read-write | current | This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for 1DM or DMM. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.84 | ColumnfsMIY1731MepTransmitDmDestMepId | read-write | current | This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the s… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.85 | ColumnfsMIY1731MepTransmitDmDestIsMepId | read-write | current | This object when True indicates that MEPID of the target MEP is used for Delay frame transmission. False indicates that unicast destination MAC address of the … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.86 | ColumnfsMIY1731MepTransmitDmDeadline | read-write | current | This object specifies a timeout, in seconds, before Delay Measurement operation exits. Delay Measurement operation exits, if configured number of messages are … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.87 | ColumnfsMIY1731MepDmrOptionalFields | read-write | current | This object specifies whether to include optional fields in the DMR Frame or not. True indicates optional fields are to be included and False indicates optiona… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.88 | ColumnfsMIY1731Mep1DmRecvCapability | read-write | current | This object specifies the administrative status of 1DM Frame reception. This enables or disables the capability of MEP to process the 1DM Frames. A value of 'e… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.89 | ColumnfsMIY1731MepFrameDelayThreshold | read-write | current | This object specifies the Threshold (in microseconds) for the Frame delay. Notification is sent to Management application if calculated frame delay exceeds con… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.90 | ColumnfsMIY1731MepAisCapability | read-write | current | This object specifies the administrative status of AIS capability.This enables or disables transmission of AIS frames. A value of 'enabled' (1) indicates AIS f… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.91 | ColumnfsMIY1731MepAisCondition | read-only | current | This object specifies the MEP is in AIS condition. AIS condition occurs when it receives an AIS frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.92 | ColumnfsMIY1731MepAisInterval | read-write | current | This object specifies the Interval between two successive AIS transmissions. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.93 | ColumnfsMIY1731MepAisPeriod | read-write | current | This object specifies the Time (in seconds) for which AIS Capability (fsMIY1731MepAisCapability) is enabled. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.94 | ColumnfsMIY1731MepAisPriority | read-write | current | This object is used for configuring AIS Priority for the Ethernet and the MPLS-TP (LSP/PW) based MEPs. For Ethernet: The Priority is a 3-bit priority value to … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.95 | ColumnfsMIY1731MepAisDropEnable | read-write | current | This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted AIS frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.96 | ColumnfsMIY1731MepAisDestIsMulticast | read-write | current | This object specifies an Enumerated value set to indicate the type of AIS transmission, unicast or multicast. 'true' indicates that AIS(s) are to be transmitte… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.97 | ColumnfsMIY1731MepAisClientMacAddress | read-write | current | This object specifies a unicast destination MAC address of the Client MEP to which AIS frame is to send. This object is not supported on MEPs created over MPLS… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.98 | ColumnfsMIY1731MepLckDestIsMulticast | read-write | current | This object specifies an Enumerated value set to indicate the type of LCK transmission, unicast or multicast. 'true' indicates that LCK signals are to be trans… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.99 | ColumnfsMIY1731MepLckClientMacAddress | read-write | current | This object specifies a unicast destination MAC address of the Client MEP to which AIS frame is to send. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.100 | ColumnfsMIY1731MepLckCondition | read-only | current | This object specifies if MEP is in LCK condition. LCK condition occurs when it receives a LCK frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.101 | ColumnfsMIY1731MepLckInterval | read-write | current | This object specifies the Interval between two successive LCK transmissions to be used by the MEP. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.102 | ColumnfsMIY1731MepLckPeriod | read-write | current | This object specifies the Time period (in seconds) for which LCK messages are to be transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.103 | ColumnfsMIY1731MepLckPriority | read-write | current | This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LCK frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.104 | ColumnfsMIY1731MepLckDropEnable | read-write | current | This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LCK frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.105 | ColumnfsMIY1731MepLckDelay | read-write | current | This object specifies When a MEP is set as locked (for out-of-service operations), data traffic through that MEP will be blocked after this delay. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.106 | ColumnfsMIY1731MepDefectConditions | read-only | current | This object specifies a vector of Boolean indicates the defect conditions. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.107 | ColumnfsMIY1731MepUnicastCcmMacAddress | read-write | current | This object specifies the Unicast MacAddress used for performance monitoring through Continuity Check Messages. Continuity Check Messages are to be transmitted… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.108 | ColumnfsMIY1731MepRowStatus | read-write | current | This object specifies the status of MEP row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.109 | ColumnfsMIY1731MepRxFCf | read-only | current | This object specifies the value of fsMIY1731MepRxFCf field is the value of in-profile data frames received from its peer MEP. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.110 | ColumnfsMIY1731Mep1DmTransInterval | read-write | current | This object specifies the Time interval (in 0.01 seconds) between two successive One-way DM Transactions and is used to carry out Delay Variation Measurement f… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.111 | ColumnfsMIY1731MepTransmitThDestMacAddress | read-write | current | This object specifies the the Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for Throughput Measurement. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.112 | ColumnfsMIY1731MepTransmitThDestMepId | read-write | current | This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the s… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.113 | ColumnfsMIY1731MepTransmitThDestIsMepId | read-write | current | This object when True indicates that MEPID of the target MEP is used for Throughput Measurement. False indicates that unicast destination MAC address of the ta… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.114 | ColumnfsMIY1731MepTransmitThMessages | read-write | current | This object specifies the number of Throughput messages (LBM / TST) to be transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.115 | ColumnfsMIY1731MepTransmitThPps | read-write | current | This object specifies the number of Throughput messages being transmitted in a second. It is used to calculate the time interval between two successive message… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.116 | ColumnfsMIY1731MepTransmitThDeadline | read-write | current | This object specifies a timeout, in seconds, before Throughput Measurement operation exits. Throughput Measurement operation exits, if configured number of mes… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.117 | ColumnfsMIY1731MepTransmitThType | read-write | current | This object specifies the Type of Throughput measurement to be initiated: - oneWay(1) Measurement (by TST) is calculated at initiation end with the use of VSM … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.118 | ColumnfsMIY1731MepTransmitThStatus | read-write | current | This object specifies an Enumerated value set to 'start' to initiate Throughput transaction and 'stop' to stop Throughput transaction. 'ready' and 'notReady' i… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.119 | ColumnfsMIY1731MepTransmitThFrameSize | read-write | current | The object specifies the initial total packet size configured by the user including the Test TLV of the (LBM / TST) message. As the Frame Size value is varied … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.120 | ColumnfsMIY1731MepTransmitThBurstMessages | read-write | current | This object specifies the number of Throughput messages (LBM / TST) to be transmitted in a burst. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.121 | ColumnfsMIY1731MepTransmitThBurstDeadline | read-write | current | This object specifies the time period, in milliseconds, for which a burst exists (LB Burst / TST Burst ). |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.122 | ColumnfsMIY1731MepTransmitThBurstType | read-write | current | This object specifies the Throughput Burst can be initiated as: - burstMessages(1) Number of Throughput messages (LBM / TST) to be transmitted in a burst. - bu… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.123 | ColumnfsMIY1731MepTransmitThTestPatternType | read-write | current | This object specifies the type of the pattern to be included in the test TLV of Throughput frame(LBM/TST PDU) . TestTlvPattern Types can be: patternNullSignalW… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.124 | ColumnfsMIY1731MepThVerifiedBps | read-only | current | This object specifies the verified throughput value. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.125 | ColumnfsMIY1731MepThUnVerifiedBps | read-only | current | This object specifies the throughput value under verification. This is the throughput value for which verification is still to be performed. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.126 | ColumnfsMIY1731MepTransmitLbmMode | read-write | current | This object specifies the LBMs which can be initiated as: - burst(1) Lbms are initiated without waiting for the reception of LBR PDUs. - requestResponse(2) Aft… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.127 | ColumnfsMIY1731MepLbmOut | read-write | current | This object specifies the Number of LBM messages transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.128 | ColumnfsMIY1731MepTransmitLbmTimeout | read-write | current | This object specifies the Time for all the replies (LBR) of LBMs to be received by the MEP.No reply (LBR) would be entertained thereafter (timeout). |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.129 | ColumnfsMIY1731MepTstCapability | read-write | current | This object specifies the administrative status of Tst capability. This enables or disables capability of MEP to initiate and process Tst operation. A value of… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.130 | ColumnfsMIY1731MepTransmitThResultOK | read-only | current | This object specifies the result of Th transaction, - true The TH Message(s) will be (or has been) sent. - false The TH Message(s) will not be sent due to some… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.131 | ColumnfsMIY1731MepThVerifiedFrameSize | read-only | current | This object specifies the Frame Size with which verified Throughput is achieved |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.132 | ColumnfsMIY1731MepAisOffload | read-create | current | This object specifies the administrative MEP AIS Offloading status. When value 'enabled' (1) is set, the AIS Offloading is enabled for the MEP. When value 'dis… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.133 | ColumnfsMIY1731MepLbmTTL | read-write | current | This object specifies the time-to-live(TTL) value to be used in the MPLS outer label header when loopback connectivity verification (ping) or diagnostic tests … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.134 | ColumnfsMIY1731MepLbmIcc | read-write | current | This object specifies the ICC(ITU Carrier Code) of the MIP node in ICC based MPLS-TP network for which loopback connectivity verification (ping) or diagnostic … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.135 | ColumnfsMIY1731MepLbmNodeId | read-write | current | This object specifies the Node Id of the specific MIP node in MPLS-TP network for which loopback connectivity verification(ping) or diagnostic tests has to be … |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.136 | ColumnfsMIY1731MepLbmIfNum | read-write | current | This object specifies the Interface Number of the specific MIP node in MPLS-TP network for which loopback connectivity verification(ping) or diagnostic tests h… |
| 1.3.6.1.4.1.29601.2.7.1.2.4.1.137 | ColumnfsMIY1731MepLoopbackStatus | read-write | current | This object specifies the loopback status of the MEP. This object used in Y1564/RFC2544 to put the remote end in loopback mode for looping back all the data pa… |
| 1.3.6.1.4.1.29601.2.7.1.2.5 | TablefsMIY1731ErrorLogTable | not-accessible | current | This object specifies the Error Log table. Size of this table is defined by the object fsMIY1731ErrorLogSize. If the addition of an error entry would exceed th… |
| 1.3.6.1.4.1.29601.2.7.1.2.5.1 | RowfsMIY1731ErrorLogEntry | not-accessible | current | This object specifies the Error Log Table. |
| 1.3.6.1.4.1.29601.2.7.1.2.5.1.1 | ColumnfsMIY1731ErrorLogSeqNumber | not-accessible | current | This object specifies the Locally maintained sequence number of Error Log Entries |
| 1.3.6.1.4.1.29601.2.7.1.2.5.1.2 | ColumnfsMIY1731ErrorLogTimeStamp | read-only | current | This object specifies the time at which error or defect is detected by a MEP. |
| 1.3.6.1.4.1.29601.2.7.1.2.5.1.3 | ColumnfsMIY1731ErrorLogType | read-only | current | This object specifies the type of error or defect detected by MEP. Type of errors/defects are: bDefRdiCondition, bDefLossOfContinuity, bDefUnexpectedPeriod, bD… |
| 1.3.6.1.4.1.29601.2.7.1.2.5.1.4 | ColumnfsMIY1731ErrorLogRMepIdentifier | read-only | current | This object specifies the specific remote MEP due to which defect is detected. Zero indicates that no remote MEP contributes for the occurence of defect. |
| 1.3.6.1.4.1.29601.2.7.1.2.6 | TablefsMIY1731LtrTable | not-accessible | current | This object specifies the table which extends the MEP table and contains a list of Linktrace replies received by a specific MEP in response to a linktrace mess… |
| 1.3.6.1.4.1.29601.2.7.1.2.6.1 | RowfsMIY1731LtrEntry | not-accessible | current | This object specifies the Linktrace Reply table entry. |
| 1.3.6.1.4.1.29601.2.7.1.2.6.1.1 | ColumnfsMIY1731LtrSeqNumber | not-accessible | current | This object specifies the Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is … |
| 1.3.6.1.4.1.29601.2.7.1.2.6.1.2 | ColumnfsMIY1731LtrReceiveOrder | not-accessible | current | This object specifies an index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. fsMIY1731LtrReceiveOrder are assigned s… |
| 1.3.6.1.4.1.29601.2.7.1.2.6.1.3 | ColumnfsMIY1731LtrReceiveTime | read-only | current | This object specifies the time taken to receive a LTR in response to a transmitted LTM. |
| 1.3.6.1.4.1.29601.2.7.1.2.7 | TablefsMIY1731LbmTable | not-accessible | current | This object specifies the table which extends the MEP table and contains information of Loopback messages sent by a specific MEP. SNMP SMI does not allow to st… |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1 | RowfsMIY1731LbmEntry | not-accessible | current | This object specifies the Loopback Message table entry. |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1.1 | ColumnfsMIY1731LbmTransId | not-accessible | current | This object specifies the Transaction Identifier identifies a loopback or ping (LBM)transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1.2 | ColumnfsMIY1731LbmSeqNumber | not-accessible | current | This object specifies the Sequence number returned by a previous transmit loopback message, indicating which LBM's response is going to be returned. |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1.3 | ColumnfsMIY1731LbmBytesSent | read-only | current | This object specifies the size (in bytes) of the LBM transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1.4 | ColumnfsMIY1731LbmTargetMacAddress | read-only | current | This object specifies the Mac Address of the target MP (MEP or MIP) to which LBM has been sent. For multicast LBM this object should not be considered. |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1.5 | ColumnfsMIY1731LbmUnexptedLbrIn | read-only | current | This object specifies the Number of unexpected Lbrs Received. |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1.6 | ColumnfsMIY1731LbmDuplicatedLbrIn | read-only | current | This object specifies the Number of Duplicated Lbrs Received. |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1.7 | ColumnfsMIY1731LbmNumOfResponders | read-only | current | This object specifies the Number of Responders which have sent the reply (LBR) for the initiated LBM. |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1.8 | ColumnfsMIY1731LbmDestType | read-only | current | This object specifies the type (i.e. Unicast, MepID, Multicast or MipId(MIP Id applicable only for MPLS-TP network)) of the destination for which LBM was sent. |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1.9 | ColumnfsMIY1731LbmDestMepId | read-only | current | This object specifies the Target MEP ID to which LBM was sent. |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1.10 | ColumnfsMIY1731LbmIcc | read-only | current | This object specifies the ICC of the MIP node in ICC based MPLS-TP network for which LBM was sent. |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1.11 | ColumnfsMIY1731LbmNodeId | read-only | current | This object specifies the Node Id of the specific MIP node in MPLS-TP network for which LBM was sent. |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1.12 | ColumnfsMIY1731LbmIfNum | read-only | current | This object specifies the Interface Number of the specific MIP node in MPLS-TP network for which LBM was sent. |
| 1.3.6.1.4.1.29601.2.7.1.2.7.1.13 | ColumnfsMIY1731LbmTTL | read-only | current | This object specifies the time-to-live(TTL) value used in the MPLS outer label header in the LBM which was sent. |
| 1.3.6.1.4.1.29601.2.7.1.2.8 | TablefsMIY1731LbrTable | not-accessible | current | This object specifies the table which extends the MEP table and contains a list of Loopback replies received by a specific MEP in response to a loopback messag… |
| 1.3.6.1.4.1.29601.2.7.1.2.8.1 | RowfsMIY1731LbrEntry | not-accessible | current | This object specifies the Loopback Reply table entry. |
| 1.3.6.1.4.1.29601.2.7.1.2.8.1.1 | ColumnfsMIY1731LbrSeqNumber | not-accessible | current | This object specifies the Sequence number received in the Loopback reply. |
| 1.3.6.1.4.1.29601.2.7.1.2.8.1.2 | ColumnfsMIY1731LbrReceiveOrder | not-accessible | current | This object specifies the Order in which LBRs are received for a same Sequence Number field value. |
| 1.3.6.1.4.1.29601.2.7.1.2.8.1.3 | ColumnfsMIY1731LbrResponderMacAddress | read-only | current | This object specifies the Mac Address of the MP which has sent the response for the LBM. |
| 1.3.6.1.4.1.29601.2.7.1.2.8.1.4 | ColumnfsMIY1731LbrReceiveTime | read-only | current | This object specifies the Time taken to receive a LBR in response to the transmitted LBM. |
| 1.3.6.1.4.1.29601.2.7.1.2.8.1.5 | ColumnfsMIY1731LbrErrorType | read-only | current | This object specifies that received loobback reply is errored one. bit 0 indicates bad MSDU (when data in the LBR does not match what was sent in the LBM) bit … |
| 1.3.6.1.4.1.29601.2.7.1.2.8.1.6 | ColumnfsMIY1731LbrDestType | read-only | current | This object specifies the Type ((i.e. Unicast, MepID, Multicast or MipId(MIP Id applicable only for MPLS-TP network)) of the destination from which LBR was rec… |
| 1.3.6.1.4.1.29601.2.7.1.2.8.1.7 | ColumnfsMIY1731LbrDestMepId | read-only | current | This object specifies the MEP which has sent the response for the LBM. |
| 1.3.6.1.4.1.29601.2.7.1.2.8.1.8 | ColumnfsMIY1731LbrICC | read-only | current | This object specifies the ICC of the MIP node in ICC based MPLS-TP network from which LBR was received. |
| 1.3.6.1.4.1.29601.2.7.1.2.8.1.9 | ColumnfsMIY1731LbrNodeId | read-only | current | This object specifies the Node Id of the specific MIP node in MPLS-TP network from which LBR was received. |
| 1.3.6.1.4.1.29601.2.7.1.2.8.1.10 | ColumnfsMIY1731LbrIfNum | read-only | current | This object specifies the Interface Number of the specific MIP node in MPLS-TP network from which LBR was received. |
| 1.3.6.1.4.1.29601.2.7.1.2.9 | TablefsMIY1731LbStatsTable | not-accessible | current | This object specifies the table which extends the MEP table and contains output of loopback or ping transaction. Output includes number of replies recieved, ti… |
| 1.3.6.1.4.1.29601.2.7.1.2.9.1 | RowfsMIY1731LbStatsEntry | not-accessible | current | This object specifies the Loopback Statistics table entry. |
| 1.3.6.1.4.1.29601.2.7.1.2.9.1.1 | ColumnfsMIY1731LbStatsLbmOut | read-only | current | This object specifies the Number of LBMs sent in a loopback or ping transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.9.1.2 | ColumnfsMIY1731LbStatsLbrIn | read-only | current | This object specifies the Number of replies (LBR) received in a loopback or ping transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.9.1.3 | ColumnfsMIY1731LbStatsLbrTimeAverage | read-only | current | This object specifies the Average time taken to receive the replies (LBR) for the current loopback or ping transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.9.1.4 | ColumnfsMIY1731LbStatsLbrTimeMin | read-only | current | This object specifies the Minimum time taken to receive the replies (LBR) for the current loopback or ping transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.9.1.5 | ColumnfsMIY1731LbStatsLbrTimeMax | read-only | current | This object specifies the Maximum time taken to receive the replies (LBR) for the current loopback or ping transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.9.1.6 | ColumnfsMIY1731LbStatsTotalResponders | read-only | current | This object specifies the Total Number of Responders which have sent the reply (LBR) for the initiated LBM. |
| 1.3.6.1.4.1.29601.2.7.1.2.9.1.7 | ColumnfsMIY1731LbStatsAvgLbrsPerResponder | read-only | current | This object specifies the Average Number of LBR(s) received per Responder. |
| 1.3.6.1.4.1.29601.2.7.1.2.10 | TablefsMIY1731FdTable | not-accessible | current | This object specifies the table which extends the MEP table and contains a list of information about the Frame Delay measured at various times by a MEP. Size o… |
| 1.3.6.1.4.1.29601.2.7.1.2.10.1 | RowfsMIY1731FdEntry | not-accessible | current | This object specifies the Frame delay buffer table entry. |
| 1.3.6.1.4.1.29601.2.7.1.2.10.1.1 | ColumnfsMIY1731FdTransId | not-accessible | current | This object specifies a delay measurement transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.10.1.2 | ColumnfsMIY1731FdSeqNumber | not-accessible | current | This object specifies the Locally maintained sequence number of FD Entries |
| 1.3.6.1.4.1.29601.2.7.1.2.10.1.3 | ColumnfsMIY1731FdTxTimeStampf | read-only | current | This object specifies the TxTimeStampf value sent in a Delay measurement message (DMM). or received in 1DM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.10.1.4 | ColumnfsMIY1731FdMeasurementTimeStamp | read-only | current | This object specifies the Time at which measurement takes place. |
| 1.3.6.1.4.1.29601.2.7.1.2.10.1.5 | ColumnfsMIY1731FdPeerMepMacAddress | read-only | current | This object specifies the Mac Address of the peer MEP to which DM message(s) is sent. |
| 1.3.6.1.4.1.29601.2.7.1.2.10.1.6 | ColumnfsMIY1731FdIfIndex | read-only | current | This object specifie the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP at whic… |
| 1.3.6.1.4.1.29601.2.7.1.2.10.1.7 | ColumnfsMIY1731FdDelayValue | read-only | current | This object specifies the measured frame delay value. |
| 1.3.6.1.4.1.29601.2.7.1.2.10.1.8 | ColumnfsMIY1731FdIFDV | read-only | current | This object specifies the Inter frame delay variation, (IFDV), calculated with respect to current transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.10.1.9 | ColumnfsMIY1731FdFDV | read-only | current | This object specifies the Frame delay variation, (IFDV), calculated with respect to current transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.10.1.10 | ColumnfsMIY1731FdMeasurementType | read-only | current | This object specifies the Type of the frame-delay measurement (oneWay or twoWay). |
| 1.3.6.1.4.1.29601.2.7.1.2.11 | TablefsMIY1731FdStatsTable | not-accessible | current | This object specifies the table which extends the MEP table and contains output of one-way and two-way delay measurement transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.11.1 | RowfsMIY1731FdStatsEntry | not-accessible | current | This object specifies the Delay Statistics table entry. |
| 1.3.6.1.4.1.29601.2.7.1.2.11.1.1 | ColumnfsMIY1731FdStatsTimeStamp | read-only | current | This object specifies the Time stamp at which one-way or two-way delay measurement (DMM) is initiated. |
| 1.3.6.1.4.1.29601.2.7.1.2.11.1.2 | ColumnfsMIY1731FdStatsDmmOut | read-only | current | This object specifies the Number of DMMs sent for a two-way delay measurement transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.11.1.3 | ColumnfsMIY1731FdStatsDmrIn | read-only | current | This object specifies the Number of requests received for a one-way or responses received for two-way delay measurement transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.11.1.4 | ColumnfsMIY1731FdStatsDelayAverage | read-only | current | This object specifies the Average delay measured for a one-way or two-way delay measurement transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.11.1.5 | ColumnfsMIY1731FdStatsFDVAverage | read-only | current | This object specifies the Frame Delay Variation (FDV) average calculated for a delay measurement transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.11.1.6 | ColumnfsMIY1731FdStatsIFDVAverage | read-only | current | This object specifies the Inter Frame Delay Variation (IFDV) average calculated for delay measurement transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.11.1.7 | ColumnfsMIY1731FdStatsDelayMin | read-only | current | This object specifies the minimum value of frame-delay. |
| 1.3.6.1.4.1.29601.2.7.1.2.11.1.8 | ColumnfsMIY1731FdStatsDelayMax | read-only | current | This object specifies the maximum value of frame-delay. |
| 1.3.6.1.4.1.29601.2.7.1.2.12 | TablefsMIY1731FlTable | not-accessible | current | This object specifies the table which extends the MEP table and contains a information about the Frame-loss measured at various times by a MEP. Size of this ta… |
| 1.3.6.1.4.1.29601.2.7.1.2.12.1 | RowfsMIY1731FlEntry | not-accessible | current | This object specifies the Frame Loss Statistics table entry. |
| 1.3.6.1.4.1.29601.2.7.1.2.12.1.1 | ColumnfsMIY1731FlTransId | not-accessible | current | This object specifies the Identifies a loss measurement transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.12.1.2 | ColumnfsMIY1731FlSeqNumber | not-accessible | current | This object specifies the Locally maintained sequence number of Frame Loss Entries |
| 1.3.6.1.4.1.29601.2.7.1.2.12.1.3 | ColumnfsMIY1731FlMeasurementTimeStamp | read-only | current | This object specifies the Time at which frame-loss is actually measured. |
| 1.3.6.1.4.1.29601.2.7.1.2.12.1.4 | ColumnfsMIY1731FlPeerMepMacAddress | read-only | current | This object specifies the Mac Address of the peer MEP to which loss measurement message(s) is sent. |
| 1.3.6.1.4.1.29601.2.7.1.2.12.1.5 | ColumnfsMIY1731FlIfIndex | read-only | current | This object specifies the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP at whi… |
| 1.3.6.1.4.1.29601.2.7.1.2.12.1.6 | ColumnfsMIY1731FlFarEndLoss | read-only | current | This object specifies the far-end frame-loss value. |
| 1.3.6.1.4.1.29601.2.7.1.2.12.1.7 | ColumnfsMIY1731FlNearEndLoss | read-only | current | This object specifies the near-end frame-loss value. |
| 1.3.6.1.4.1.29601.2.7.1.2.12.1.8 | ColumnfsMIY1731FlMeasurementTime | read-only | current | This object specifies the Time taken to measure frame-loss. |
| 1.3.6.1.4.1.29601.2.7.1.2.13 | TablefsMIY1731FlStatsTable | not-accessible | current | This object specifies the table which extends the MEP table and contains output of frame-loss measurement transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.13.1 | RowfsMIY1731FlStatsEntry | not-accessible | current | This object specifies the Frame Loss Statistics table entry. |
| 1.3.6.1.4.1.29601.2.7.1.2.13.1.1 | ColumnfsMIY1731FlStatsTimeStamp | read-only | current | This object specifies the Time stamp at which frame-loss measurement transaction is initiated. |
| 1.3.6.1.4.1.29601.2.7.1.2.13.1.2 | ColumnfsMIY1731FlStatsMessagesOut | read-only | current | This object specifies the Number of frames with ETH-LM information sent for a transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.13.1.3 | ColumnfsMIY1731FlStatsMessagesIn | read-only | current | This object specifies the Number of frames with ETH-LM information received for a transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.13.1.4 | ColumnfsMIY1731FlStatsFarEndLossAverage | read-only | current | This object specifies the Average of the far-end frame-loss measured for a transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.13.1.5 | ColumnfsMIY1731FlStatsNearEndLossAverage | read-only | current | This object specifies the Average of the near-end frame-loss measured for a transaction. |
| 1.3.6.1.4.1.29601.2.7.1.2.13.1.6 | ColumnfsMIY1731FlStatsMeasurementType | read-only | current | This object specifies the Type of the frame-loss measurement (Single-ended or Dual-ended) done. |
| 1.3.6.1.4.1.29601.2.7.1.2.13.1.7 | ColumnfsMIY1731FlStatsFarEndLossMin | read-only | current | This object specifies the minimum value of far-end frame-loss. |
| 1.3.6.1.4.1.29601.2.7.1.2.13.1.8 | ColumnfsMIY1731FlStatsFarEndLossMax | read-only | current | This object specifies the maxmium value of far-end frame-loss. |
| 1.3.6.1.4.1.29601.2.7.1.2.13.1.9 | ColumnfsMIY1731FlStatsNearEndLossMin | read-only | current | This object specifies the minimum value of near-end frame-loss. |
| 1.3.6.1.4.1.29601.2.7.1.2.13.1.10 | ColumnfsMIY1731FlStatsNearEndLossMax | read-only | current | This object specifies the maxmium value of near-end frame-loss. |
| 1.3.6.1.4.1.29601.2.7.1.2.14 | TablefsMIY1731MplstpExtRemoteMepTable | not-accessible | current | This object specifies the Remote Maintenance End Point table for the Y.1731 extensions over MPLS-TP networks. Each row in the table realizes an ME for the MPLS… |
| 1.3.6.1.4.1.29601.2.7.1.2.14.1 | RowfsMIY1731MplstpExtRemoteMepEntry | not-accessible | current | This object specifies an instance of the Remote Maintenenace End Point table entry used in Y.1731 based MPLS-TP networks. |
| 1.3.6.1.4.1.29601.2.7.1.2.14.1.1 | ColumnfsMIY1731MplstpExtRMepIdentifier | not-accessible | current | This object specifies the Maintenance End Point Identifier of a Remote MEP associated with the Local-MEP(fsMIY1731MepIdentifier) which together constitutes an … |
| 1.3.6.1.4.1.29601.2.7.1.2.14.1.2 | ColumnfsMIY1731MplstpExtRMepServicePointer | read-create | current | This object specifies the MPLS Transport path which represents the ME. This object may point to an entry in the mplsTunnelTable, if the value of the object fsM… |
| 1.3.6.1.4.1.29601.2.7.1.2.14.1.3 | ColumnfsMIY1731MplstpExtRMepRowStatus | read-create | current | This object specifies the status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before … |
| 1.3.6.1.4.1.29601.2.7.1.2.15 | TablefsMIY1731StatsTable | not-accessible | current | This object specifies the List of per virtual context ECFM-Y1731 Module Statistics. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1 | RowfsMIY1731StatsEntry | not-accessible | current | This object specifies the Per virtual context ECFM-Y1731 Module Statistics. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.1 | ColumnfsMIY1731AisOut | read-write | current | This object specifies the Number of AIS PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.2 | ColumnfsMIY1731AisIn | read-write | current | This object specifies the Number of AIS PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.3 | ColumnfsMIY1731LckOut | read-write | current | This object specifies the Number of LCK PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.4 | ColumnfsMIY1731LckIn | read-write | current | This object specifies the Number of LCK PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.5 | ColumnfsMIY1731TstOut | read-write | current | This object specifies the Number of TST PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.6 | ColumnfsMIY1731TstIn | read-write | current | This object specifies the Number of TST PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.7 | ColumnfsMIY1731LmmOut | read-write | current | This object specifies the Number of LMM PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.8 | ColumnfsMIY1731LmmIn | read-write | current | This object specifies the Number of LMM PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.9 | ColumnfsMIY1731LmrOut | read-write | current | This object specifies the Number of LMR PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.10 | ColumnfsMIY1731LmrIn | read-write | current | This object specifies the Number of LMR PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.11 | ColumnfsMIY17311DmOut | read-write | current | This object specifies the Number of 1DM PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.12 | ColumnfsMIY17311DmIn | read-write | current | This object specifies the Number of 1DM PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.13 | ColumnfsMIY1731DmmOut | read-write | current | This object specifies the Number of DMM PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.14 | ColumnfsMIY1731DmmIn | read-write | current | This object specifies the Number of DMM PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.15 | ColumnfsMIY1731DmrOut | read-write | current | This object specifies the Number of DMR PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.16 | ColumnfsMIY1731DmrIn | read-write | current | This object specifies the Number of DMR PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.17 | ColumnfsMIY1731ApsOut | read-write | current | This object specifies the Number of APS PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.18 | ColumnfsMIY1731ApsIn | read-write | current | This object specifies the Number of APS PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.19 | ColumnfsMIY1731MccOut | read-write | current | This object specifies the Number of MCC PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.20 | ColumnfsMIY1731MccIn | read-write | current | This object specifies the Number of MCC PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.21 | ColumnfsMIY1731VsmOut | read-write | current | This object specifies the Number of VSM PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.22 | ColumnfsMIY1731VsmIn | read-write | current | This object specifies the Number of VSM PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.23 | ColumnfsMIY1731VsrOut | read-write | current | This object specifies the Number of VSR PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.24 | ColumnfsMIY1731VsrIn | read-write | current | This object specifies the Number of VSR PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.25 | ColumnfsMIY1731ExmOut | read-write | current | This object specifies the Number of EXM PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.26 | ColumnfsMIY1731ExmIn | read-write | current | This object specifies the Number of EXM PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.27 | ColumnfsMIY1731ExrOut | read-write | current | This object specifies the Number of EXR PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.28 | ColumnfsMIY1731ExrIn | read-write | current | This object specifies the Number of EXR PDUs received. |
| 1.3.6.1.4.1.29601.2.7.1.2.15.1.29 | ColumnfsMIY1731TxFailOpcode | read-only | current | This object specifies the Opcode value of Last Tx Failure CFM PDU. When CFM PDU is not transmitted from system due to system failure then CFM PDU Tx failure tr… |
| 1.3.6.1.4.1.29601.2.7.1.2.16 | TablefsMIY1731MepAvailabilityTable | not-accessible | current | This object specifies the Maintenance Entity Group End Point (MEP) Availability table. Each row in the table is associated with a different MEP. This table use… |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1 | RowfsMIY1731MepAvailabilityEntry | not-accessible | current | This object specifies the MEP Availability table entry |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.1 | ColumnfsMIY1731MepAvailabilityStatus | read-write | current | This object specifies an Enumerated value set to 'start' to initiate Avilability Measurement and 'stop' to stop Availability Measurement. 'ready' and 'notReady… |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.2 | ColumnfsMIY1731MepAvailabilityResultOK | read-only | current | This object specifies the result of the operation: - true Initiating Availability measurement by sending LM Message (LMM) is successful. - false Initiating Ava… |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.3 | ColumnfsMIY1731MepAvailabilityInterval | read-write | current | This object specifies a time interval much smaller than Deadline, Interval between two successive LMM transmissions to be used by the MEP for calculating Avail… |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.4 | ColumnfsMIY1731MepAvailabilityDeadline | read-write | current | This object specifies a timeout, in seconds, the Time interval to conduct the availability functionality |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.5 | ColumnfsMIY1731MepAvailabilityLowerThreshold | read-write | current | This object specifies the Availability frame loss ratio threshold, the lower threshold used to define an interval as available. If far-end loss ratio is lesser… |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.6 | ColumnfsMIY1731MepAvailabilityUpperThreshold | read-write | current | This object specifies the Unavailability frame loss ratio threshold, the upper threshold to define an interval as unavailable. If far-end loss ratio is greater… |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.7 | ColumnfsMIY1731MepAvailabilityModestAreaIsAvailable | read-write | current | This object specifies whether the area between upper and lower threshold is referred as available or unavailable. True - If Calculated Frame loss ration falls … |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.8 | ColumnfsMIY1731MepAvailabilityWindowSize | read-write | current | This object specifies the Number of consecutive small time intervals for assessing availability |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.9 | ColumnfsMIY1731MepAvailabilityDestMacAddress | read-write | current | This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for Availability Measurement. |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.10 | ColumnfsMIY1731MepAvailabilityDestMepId | read-write | current | This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the s… |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.11 | ColumnfsMIY1731MepAvailabilityDestIsMepId | read-write | current | This object when True indicates that MEPID of the target MEP is used for LMM transmission during Availability Measurement. False indicates that unicast destina… |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.12 | ColumnfsMIY1731MepAvailabilityType | read-write | current | This object specifies the defStatic indicates that the algorithm for Availability Measurement is static window algorithm. The availability measurement will be … |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.13 | ColumnfsMIY1731MepAvailabilitySchldDownInitTime | read-write | current | This object specifies the Time when Scheduled down time is initiated, denotes the beginning of time interval agreed upon by both the Subscriber and Service Pro… |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.14 | ColumnfsMIY1731MepAvailabilitySchldDownEndTime | read-write | current | This object specifies the Time when Scheduled down time is ending, denotes the ending of time interval agreed upon by both the Subscriber and Service Provider … |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.15 | ColumnfsMIY1731MepAvailabilityPriority | read-write | current | This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.16 | ColumnfsMIY1731MepAvailabilityDropEnable | read-write | current | This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame. |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.17 | ColumnfsMIY1731MepAvailabilityPercentage | read-only | current | This object specifies the percentage of Availability If fsMIY1731MepAvailabilityType is selected as defStatic, this object contains the Availability Performanc… |
| 1.3.6.1.4.1.29601.2.7.1.2.16.1.18 | ColumnfsMIY1731MepAvailabilityRowStatus | read-write | current | This object specifies the status of MEP Availability Table row. The writable columns in a row can not be changed if the row is active. All columns must have a … |
| 1.3.6.1.4.1.29601.2.7.1.2.17 | TablefsMIY1731LoopbackTable | not-accessible | current | This object specifies the table which contains controls for the loopback state of the remote MEP as well as indicates the status of the loopback function. |
| 1.3.6.1.4.1.29601.2.7.1.2.17.1 | RowfsMIY1731LoopbackEntry | not-accessible | current | This object specifies an entry in the table, containing information on the loopback status for a single Ethernet service interface. Entries in the table are au… |
| 1.3.6.1.4.1.29601.2.7.1.2.17.1.1 | ColumnfsMIY1731LoopbackIndex | not-accessible | current | This object specifies the service provider VLAN (S-VLAN) if value is less than 4094. If the value is greater than 4094 this object indicates VFI. |
| 1.3.6.1.4.1.29601.2.7.1.2.17.1.2 | ColumnfsMIY1731LoopbackStatus | read-write | current | This object specifies the loopback status of the LoopbackIndex. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FsY1731AisLckInterval | INTEGER { interval1s (1), interval1min (2) } | current | This object specifies the interval at which AIS or LCK(s) are sent by a MEP. The possible values are: interval1s(1) AIS or LCK(s) are sent every second. interval1min(2) AIS or LCK(s) are sent every minute. Note: enumera… |
| FsY1731AvailabilityInterval | INTEGER { interval100ms (1), interval1s (2), interval10s (3), interval1min (4), interval10min (5), interval30min (6), interval1hour (7) } | current | This object specifies the interval at which Availability Measurement is carried out by sendiong LMM. The possible values are: interval100ms(1) Availability Measurement is carried out at every 100 milliseconds. interval1… |
| FsY1731AvailabilityType | INTEGER { defStatic (1), defSliding (2) } | current | This object specifies the type of availability measurement to be carried out The valid values are: Static (1) Static Availability Measurement will be carried out. Sliding(2) Sliding Availability Measurement will be carr… |
| FsY1731CcmApplication | INTEGER { ccFaultManagement (0), ccPerformanceMonitoring (1), ccProtectionSwitching (2) } | current | This object specifies an enumerated value indicates the ETH-CC role to be or currently being performed. ccFaultManagement(0) Indicates ETH-CC is used for Fault Management. ccPerformanceMonitoring(1) Indicates ETH-CC is … |
| FsY1731DestType | INTEGER { unicast (0), mepid (1), multicast (2), mipid (3) } | current | This object specifies the type of transaction, unicast ,through MEPID or multicast. unicast(0) Indicates the operation is to be unicast. mepid(1) Indicates that MEPID of the target MEP is used for operation. multicast(2… |
| FsY1731EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | This object specifies a simple status value. |
| FsY1731ErrorLogType | INTEGER{ logRdiConditionEntry(1), logLossOfContinuityEntry(2), logUnexpectedPeriodEntry(3), logUnexpectedMepEntry(4), logMisMergeEntry(5), logUnexpectedMegLevelEntry(6), logLocalLinkFailureEntry(7), logInternalHWFailureEntry(8), logInternalSWFailureEntry(9), logAisConditonEntry(10), logLckConditionEntry(11), logRdiConditionExit(12), logLossOfContinuityExit(13), logUnexpectedPeriodExit(14), logUnexpectedMepExit(15), logMisMergeExit(16), logUnexpectedMegLevelExit(17), logLocalLinkFailureExit(18), logInternalHWFailureExit(19), logInternalSWFailureExit(20), logAisConditonExit(21), logLckConditionExit(22) } | current | This object specifies a MEP to detect and report a number of defects. logRdiConditionEntry(1) The MEP has encountered remote MEP defect condition entry. logLossOfContinuityEntry(2) The MEP has encountered loss of contin… |
| FsY1731LbrErrType | INTEGER { none (0), badMacServiceDataUnit (1), crc32CheckFailure (2) } | current | This object specifies an enumerated value indicates the received loopback reply error type. none (0) Indicates that no error was encountered in the received LBR. BadMacServiceDataUnit (1) Indicates bad/corrupt mac servi… |
| FsY1731LmmInterval | INTEGER { interval100ms (1), interval1s (2), interval10s (3), interval1min (4), interval10min (5) } | current | This object specifies the interval at which LMMs are sent by a MEP. The possible values are: interval100ms(1) LMMs are sent every 100 milliseconds. interval1s(2) LMMs are sent every second. interval10s(3) LMMs are sent … |
| FsY1731MepDefects | BITS{ none (0), bDefRdiCondition (1), bDefLossOfContinuity (2), bDefUnexpectedPeriod (3), bDefUnexpectedMep (4), bDefMisMerge (5), bDefUnexpectedMegLevel (6), bDefLocalLinkFailure (7), bDefInternalHWFailure (8), bDefInternalSWFailure (9), bDefAisCondition (10), bDefLckCondition (11) } | current | This object specifies a MEP to detect and report a number of defects, and multiple defects can be present at the same time. These defects conditions are: none (0) Dummy Bit bDefRdiCondition (1) The MEP has encountered r… |
| FsY1731TestTlvPatternType | INTEGER { patternNullSignalWithoutCRC32 (0), patternNullSignalWithCRC32 (1), patternPRBSWithoutCRC32 (2), patternPRBSWithCRC32 (3) } | current | This object specifies the Test pattern for Test TLV to be included in LBM or TST message. patternNullSignalWithoutCRC32(0) Pattern contains null signal without any CRC. patternNullSignalWithCRC32(1) Pattern contains nul… |
| FsY1731TimeIntervalType | INTEGER { microseconds (1), milliseconds (2), seconds (3) } | current | This object specifies the units of interval at which LBM or TSTs are sent by a MEP. The possible values are: microseconds(1) units for LBMs or TSTs transmission interval are microseconds. milliseconds(2) units for LBMs … |
| FsY1731TimeRepresentation | OCTET STRING (SIZE (8)) | current | This object specifies the time stamp. field octets contents range 1 1-4 seconds 0..4294967295 2 5-8 nanoseconds 0..0..4294967295 |
| FsY1731TransmitLbmTlvTypeOrNone | INTEGER { none (0), dataTlv (1), testTlv (2) } | current | This object specifies an enumerated value indicates which TLV is to be included in the LBM. none(0) Indicates No TLV is included in the LBM. dataTlv (1) Indicates Data TLV is included in the LBM. testTlv (2) Indicates T… |
| FsY1731TransmitStatus | INTEGER { ready (0), notReady (1), start (2), stop (3) } | current | This object specifies an enumerated value indicates whether particular transmission can be initiated. ready(0) Indicates transmission can be initiated. notReady(1) Indicates transmission can not be initiated. start(2) T… |
| FsY1731Traps | BITS{ none (0), bTrapTstReceivedWithError (1), bTrapFrameLoss (2), bTrapFrameDelay (3), bTrapDefRdiCondition (4), bTrapDefLossOfContinuity (5), bTrapDefUnexpectedPeriod (6), bTrapDefUnexpectedMep (7), bTrapDefMisMerge (8), bTrapDefUnexpectedMegLevel (9), bTrapDefLocalLinkFailure (10), bTrapDefInternalHWFailure (11), bTrapDefInternalSWFailure (12), bTrapDefAisCondition (13), bTrapDefLckCondition (14) } | current | This object specifies the notifications to be provided to Management entity. Multiple notifications can be enabled at the same time. Notifications are: none(0) Dummy Bit bTrapTstReceivedWithError(1) The MEP has received… |