ARICENT-ESAT-CFG-MIB
62 objects
The enterprise ID 29601 is originally assigned to Aricent Communications Pvt. Limited. Aricent Communications is a part of Aricent Group.
Imported Objects
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-SMI | Counter64 enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.88 | IdentityfsEsat | The enterprise ID 29601 is originally assigned to Aricent Communications Pvt. Limited. Aricent Communications is a part of Aricent Group. | ||
| 1.3.6.1.4.1.29601.2.88.1 | ScalarfsEsatSystemControl | read-write | current | This object specifies the admin status of Ethernet Service Activation Test (ESAT) Module in the system. Y.1564 is an Ethernet service activation test methodolo… |
| 1.3.6.1.4.1.29601.2.88.2 | ScalarfsEsatTraceOption | read-write | current | This object is used to enable the trace statements in ESAT Module. A FOUR BYTE integer is specified for enabling the level of tracing. Each BIT in the four byt… |
| 1.3.6.1.4.1.29601.2.88.3 | TablefsEsatSlaTable | not-accessible | current | This table contains ESAT SLA configurations. |
| 1.3.6.1.4.1.29601.2.88.3.1 | RowfsEsatSlaEntry | not-accessible | current | This entry contains information about a particular ESAT SLA Configuration. |
| 1.3.6.1.4.1.29601.2.88.3.1.1 | ColumnfsEsatSlaId | not-accessible | current | This object specifies the ESAT Service Level Agreement Identifier. This is a free running index used to identify a SLA. |
| 1.3.6.1.4.1.29601.2.88.3.1.2 | ColumnfsEsatSlaIfIndex | read-write | current | This object specifies the Interface Index on which the ESAT test is performed. |
| 1.3.6.1.4.1.29601.2.88.3.1.3 | ColumnfsEsatSlaEvcIndex | read-write | current | This object specifies the service under test. The EVC is configured using the MEF MIB. Internally this object refers to fsEvcIndex in MEF MIB. |
| 1.3.6.1.4.1.29601.2.88.3.1.4 | ColumnfsEsatSlaMEG | read-write | current | This object specifies the Maintenance Entity Group (MEG) of the fsEsatSlaEntry. Internally this object refers to MIB object dot1agCfmMdIndex of ECFM 802.1ag st… |
| 1.3.6.1.4.1.29601.2.88.3.1.5 | ColumnfsEsatSlaME | read-write | current | This object specifies the Maintenance Entity (ME) of the fsEsatSlaEntry. Internally this object refers to MIB object dot1agCfmMaIndex of ECFM 802.1ag standard. |
| 1.3.6.1.4.1.29601.2.88.3.1.6 | ColumnfsEsatSlaMEP | read-write | current | This object specifies the Maintenance Association End Point (MEP) of the fsEsatSlaEntry. Internally this object refers to MIB object dot1agCfmMepIdentifier of … |
| 1.3.6.1.4.1.29601.2.88.3.1.7 | ColumnfsEsatSlaRateStep | read-write | current | This object specifies the step load CIR (Committed Information Rate) configuration test. If no value is provided, 25% of CIR is sent first, followed by 50% of … |
| 1.3.6.1.4.1.29601.2.88.3.1.8 | ColumnfsEsatSlaFreqDelay | read-write | current | This object specifies the delay in seconds between each packet part of the traffic generation. |
| 1.3.6.1.4.1.29601.2.88.3.1.9 | ColumnfsEsatSlaDuration | read-write | current | This object specifies the duration of the complete Ethernet Service Activation Test in seconds. For CIR configuration test, the CIR traffic is generated for th… |
| 1.3.6.1.4.1.29601.2.88.3.1.10 | ColumnfsEsatSlaDirection | read-write | current | This object specifies the direction of the measurements . In a bridge, the performance measurements can be done either at user-to-network interface (UNI)port o… |
| 1.3.6.1.4.1.29601.2.88.3.1.11 | ColumnfsEsatSlaTrafProfileId | read-write | current | This object specifies the Traffic Profile to which the SLA is currently mapped. Multiple packet profiles can be created and each can be associated to a given S… |
| 1.3.6.1.4.1.29601.2.88.3.1.12 | ColumnfsEsatSlaSacId | read-write | current | This object specifies the Service Acceptance Criteria to which the SLA is currently mapped. Multiple SACs can be created and each can be associated to a given … |
| 1.3.6.1.4.1.29601.2.88.3.1.13 | ColumnfsEsatSlaStatus | read-write | current | This object specifies the ESAT SLA status. It is used to start or stop the SLA under test. |
| 1.3.6.1.4.1.29601.2.88.3.1.14 | ColumnfsEsatSlaRowStatus | read-write | current | This object specifies the row status and is used to create or deletea new entry by setting this object to the appropriate value as mentioned in SMI-v2. |
| 1.3.6.1.4.1.29601.2.88.4 | TablefsEsatTrafProfTable | not-accessible | current | This table contains Traffic Profile configurations. |
| 1.3.6.1.4.1.29601.2.88.4.1 | RowfsEsatTrafProfEntry | not-accessible | current | This entry contains information about a particular Traffic Profile configuration. |
| 1.3.6.1.4.1.29601.2.88.4.1.1 | ColumnfsEsatTrafProfId | not-accessible | current | This object specifies the ESAT Traffic Profile Identifier. This is a free running index. |
| 1.3.6.1.4.1.29601.2.88.4.1.2 | ColumnfsEsatTrafProfDir | read-write | current | This object specifies the direction of ESAT Traffic Profile Generation. When this object is set as external, the traffic is generated at the wire-side of netwo… |
| 1.3.6.1.4.1.29601.2.88.4.1.3 | ColumnfsEsatTrafProfTagType | read-write | current | This object specifies the type of ESAT vlan tag to be used for Traffic Profile Generation. This specifies the type of packet to be used to generate traffic. |
| 1.3.6.1.4.1.29601.2.88.4.1.4 | ColumnfsEsatTrafProfInVlan | read-write | current | This object specifies the the VLAN ID for the inner vlan tag of the interface from which the message will be sent. This is applicable if the fsEsatTrafProfTagT… |
| 1.3.6.1.4.1.29601.2.88.4.1.5 | ColumnfsEsatTrafProfOutVlan | read-write | current | This object specifies the ESAT Outer VLAN ID to be used as part of profile frame. This is applicable if the fsEsatTrafProfTagType is double tagged. |
| 1.3.6.1.4.1.29601.2.88.4.1.6 | ColumnfsEsatTrafProfInCos | read-write | current | This object specifies the class of service (CoS) value for the inner VLAN tag of the interface from which the message will be sent. This is applicable if the f… |
| 1.3.6.1.4.1.29601.2.88.4.1.7 | ColumnfsEsatTrafProfOutCos | read-write | current | This object specifies the ESAT Outer Class of Service to be used as part of profile frame. This is applicable if the fsEsatTrafProfTagType is double tagged |
| 1.3.6.1.4.1.29601.2.88.4.1.8 | ColumnfsEsatTrafProfPktSize | read-write | current | This object specifies the ESAT Traffic Profile Packet Size in bytes. |
| 1.3.6.1.4.1.29601.2.88.4.1.9 | ColumnfsEsatTrafProfSrcMac | read-write | current | This object specifies the ESAT Source MAC address in the packet profile. |
| 1.3.6.1.4.1.29601.2.88.4.1.10 | ColumnfsEsatTrafProfDestMac | read-write | current | This object specifies the ESAT Destination MAC address in the packet profile. |
| 1.3.6.1.4.1.29601.2.88.4.1.11 | ColumnfsEsatTrafProfPayload | read-write | current | This object specifies the ESAT Payload in the packet profile. |
| 1.3.6.1.4.1.29601.2.88.4.1.12 | ColumnfsEsatTrafProfRowStatus | read-write | current | This object sp;ecifies the row status and is used to create or delete a new entry by setting this object to the appropriate value as mentioned in SMI-v2. |
| 1.3.6.1.4.1.29601.2.88.5 | TablefsEsatSacTable | not-accessible | current | This table contains Service Acceptance Criteria Profile configuration. Service Acceptance Criteria (SAC) is a set of criteria used to ensure that a service mee… |
| 1.3.6.1.4.1.29601.2.88.5.1 | RowfsEsatSacEntry | not-accessible | current | This entry contains information about a particular SAC Profile configuration. |
| 1.3.6.1.4.1.29601.2.88.5.1.1 | ColumnfsEsatSacId | not-accessible | current | This object specifies the ESAT SAC Identifier used to identify a particular SAC entry. |
| 1.3.6.1.4.1.29601.2.88.5.1.2 | ColumnfsEsatSacInfoRate | read-write | current | This object specifies the ESAT Information Rate configured as part of this SAC. This is the minimum Information Rate above which a test is declared fail. Infor… |
| 1.3.6.1.4.1.29601.2.88.5.1.3 | ColumnfsEsatSacFrLossRatio | read-write | current | This object specifies the ESAT Frame Loss Ratio (FLR) configured as part of this SAC. This is the minimum frame loss ratio above which a test is declared fail.… |
| 1.3.6.1.4.1.29601.2.88.5.1.4 | ColumnfsEsatSacFrTxDelay | read-write | current | This object specifies the ESAT Frame Transfer Delay (FTD)configured as part of this SAC. This is the minimum frame transfer delay (in milliseconds)above which … |
| 1.3.6.1.4.1.29601.2.88.5.1.5 | ColumnfsEsatSacFrDelayVar | read-write | current | This object specifies the ESAT Frame Delay Variation configured as part of this SAC. This is the minimum frame delay variation (in milliseconds) above which a … |
| 1.3.6.1.4.1.29601.2.88.5.1.6 | ColumnfsEsatSacRowStatus | read-write | current | This object specifies the row status and is used to create or delete a new entry by setting this object to the appropriate value as mentioned in SMI-v2. |
| 1.3.6.1.4.1.29601.2.88.6 | TablefsEsatStatsTable | not-accessible | current | This table contains the statistics of the SLA operation performed. |
| 1.3.6.1.4.1.29601.2.88.6.1 | RowfsEsatStatsEntry | not-accessible | current | This entry specifies the statistics about a particular step in the SLA operation performed. |
| 1.3.6.1.4.1.29601.2.88.6.1.1 | ColumnfsEsatStatsStepId | not-accessible | current | This object specifies the ESAT Step Index in SLA operation statistics. A report is generated for each fsEsatSlaRateStep configured.. CIR configuration testis p… |
| 1.3.6.1.4.1.29601.2.88.6.1.2 | ColumnfsEsatStatsResult | read-only | current | This oject specifies the step result for Ethernet Service Activation Test |
| 1.3.6.1.4.1.29601.2.88.6.1.3 | ColumnfsEsatStatsDuration | read-only | current | This object specifies the duration of the step of Ethernet Service Activation Test . |
| 1.3.6.1.4.1.29601.2.88.6.1.4 | ColumnfsEsatStatsTxPkts | read-only | current | This object specifies the number of packets transmitted during the step test. If the target does not support this counter, this value is maintanined as zero |
| 1.3.6.1.4.1.29601.2.88.6.1.5 | ColumnfsEsatStatsTxBytes | read-only | current | This object specifies the number of bytes transmitted during the step test. If the target does not support this counter, this value is maintanined as zero |
| 1.3.6.1.4.1.29601.2.88.6.1.6 | ColumnfsEsatStatsRxPkts | read-only | current | This object specifies the number of packets received during the step test. If the target does not support this counter, this value is maintained as zero |
| 1.3.6.1.4.1.29601.2.88.6.1.7 | ColumnfsEsatStatsRxBytes | read-only | current | This object specifies the number of bytes received during the step test. If the target does not support this counter, value shall be zero |
| 1.3.6.1.4.1.29601.2.88.6.1.8 | ColumnfsEsatStatsIrMin | read-only | current | This object specifies the Minimum Information Rate for the step test. |
| 1.3.6.1.4.1.29601.2.88.6.1.9 | ColumnfsEsatStatsIrMean | read-only | current | This object specifies the Mean Information Rate for the step test. |
| 1.3.6.1.4.1.29601.2.88.6.1.10 | ColumnfsEsatStatsIrMax | read-only | current | This object specifies the Maximum Information Rate for step test. |
| 1.3.6.1.4.1.29601.2.88.6.1.11 | ColumnfsEsatStatsFrLossCnt | read-only | current | This object specifies the number of frames lost during the step test. |
| 1.3.6.1.4.1.29601.2.88.6.1.12 | ColumnfsEsatStatsFrLossRatio | read-only | current | This object specifies the Frame Loss Ratio observed during the step test. |
| 1.3.6.1.4.1.29601.2.88.6.1.13 | ColumnfsEsatStatsFrTxDelayMin | read-only | current | This object specifies the Minimum Frame Transfer Delay observed during the step test. |
| 1.3.6.1.4.1.29601.2.88.6.1.14 | ColumnfsEsatStatsFrTxDelayMean | read-only | current | This object specifies the Mean Frame Transfer Delay observed during the step test. |
| 1.3.6.1.4.1.29601.2.88.6.1.15 | ColumnfsEsatStatsFrTxDelayMax | read-only | current | This object specifies the Maximum Frame Transfer Delay observed during the step test. |
| 1.3.6.1.4.1.29601.2.88.6.1.16 | ColumnfsEsatStatsFrDelayVarMin | read-only | current | This object specifies the Minimum Frame Delay Variation observed during the step test. |
| 1.3.6.1.4.1.29601.2.88.6.1.17 | ColumnfsEsatStatsFrDelayVarMean | read-only | current | This object specifies the Mean Frame Delay Variation observed during the step test. |
| 1.3.6.1.4.1.29601.2.88.6.1.18 | ColumnfsEsatStatsFrDelayVarMax | read-only | current | This object specifies the Maximum Frame Delay Variation observed during the step test. |
| 1.3.6.1.4.1.29601.2.88.6.1.19 | ColumnfsEsatStatsPortStateCounter | read-only | current | This object specifies the number of times the port has toggled during each step test. |