ARICENT-ICCH-MIB
30 objects
The proprietary MIB module for ICCH. This MIB supports Inter-Chassis Communication Handling.
Imported Objects
| Q-BRIDGE-MIB | VlanId |
| RMON2-MIB | ZeroBasedCounter32 |
| SNMPv2-SMI | enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.94 | IdentityfsIcchMIB | The proprietary MIB module for ICCH. This MIB supports Inter-Chassis Communication Handling. | ||
| 1.3.6.1.4.1.29601.2.94.1 | NodefsIcch | |||
| 1.3.6.1.4.1.29601.2.94.1.1 | ScalarfsIcchTrcLevel | read-write | current | |
| 1.3.6.1.4.1.29601.2.94.1.2 | ScalarfsIcchStatsEnable | read-write | current | This object is used to enable/disable the statistics collection of the Inter-Chassis Communication handler module. By default, statistics collection is enabled… |
| 1.3.6.1.4.1.29601.2.94.1.3 | ScalarfsIcchClearStats | read-write | current | This object is used to clear the statistics collection of the Inter Chassis Communication handler module. This object has no effect when it is set to false. By… |
| 1.3.6.1.4.1.29601.2.94.1.4 | ScalarfsIcchEnableProtoSync | read-write | current | This object specifies synchronization messages that need to be enabled in ICCL. By default, all synchronization messages are blocked on ICCL. |
| 1.3.6.1.4.1.29601.2.94.1.5 | ScalarfsIcchFetchRemoteFdb | read-write | current | This object is used to fetch remote FDB entries when MC-LAG is enabled and FDB sync-up is enabled in the system. This object can be used after the complete MAC… |
| 1.3.6.1.4.1.29601.2.94.1.6 | ScalarfsIcchPeerNodeIpAddress | read-only | current | This object is used to specify the IP Address of Peer Node used for ICCL TCP /IP communication . This IP address corresponds to the Layer 3 interface that will… |
| 1.3.6.1.4.1.29601.2.94.1.7 | ScalarfsIcchPeerNodeState | read-only | current | This object specifies the state of the peer Node.The state of the node is decided after election by heart beat module. Election is based on the fsIcchPeerNodeI… |
| 1.3.6.1.4.1.29601.2.94.2 | NodefsIcchStatistics | |||
| 1.3.6.1.4.1.29601.2.94.2.1 | ScalarfsIcchStatsSyncMsgTxCount | read-only | current | This object specifies the total number of synchronization messages successfully sent from this node. |
| 1.3.6.1.4.1.29601.2.94.2.2 | ScalarfsIcchStatsSyncMsgTxFailedCount | read-only | current | This object specifies the total number of sync-up messages failed while sending. |
| 1.3.6.1.4.1.29601.2.94.2.3 | ScalarfsIcchStatsSyncMsgRxCount | read-only | current | This object specifies the total number of sync-up messages received at this node. |
| 1.3.6.1.4.1.29601.2.94.2.4 | ScalarfsIcchStatsSyncMsgProcCount | read-only | current | This object specifies the total number of sync-up messages received and processed at this node. |
| 1.3.6.1.4.1.29601.2.94.2.5 | ScalarfsIcchStatsSyncMsgMissedCount | read-only | current | The ICCH module receives and processes the synchronization messages with the help of the sequence number in the message. In some failure cases, when the messag… |
| 1.3.6.1.4.1.29601.2.94.3 | NodefsIcchNotification | |||
| 1.3.6.1.4.1.29601.2.94.3.0 | NodefsIcchTrap | |||
| 1.3.6.1.4.1.29601.2.94.3.0.1 | NotificationfsIcchTrapNodeStatusChange | current | This object indicates that there is a significant status change in the Inter-chassis communication handler state. This trap should be generated when the node s… | |
| 1.3.6.1.4.1.29601.2.94.3.0.2 | NotificationfsIcchTrapPeerNodeStatusChange | current | This object indicates that there is a significant status change in the Peer node.This trap should be generated when peer node status changes | |
| 1.3.6.1.4.1.29601.2.94.4 | NodefsIcclSession | |||
| 1.3.6.1.4.1.29601.2.94.4.1 | TablefsIcclSessionTable | not-accessible | current | This table is used to access the stored ICCL information |
| 1.3.6.1.4.1.29601.2.94.4.1.1 | RowfsIcclSessionEntry | not-accessible | current | This object specifies the ICCL information entry of a session |
| 1.3.6.1.4.1.29601.2.94.4.1.1.1 | ColumnfsIcclSessionInstanceId | not-accessible | current | This object specifies an unique value, that identifies ICCL instance. |
| 1.3.6.1.4.1.29601.2.94.4.1.1.2 | ColumnfsIcclSessionInterface | read-write | current | This object is used to specify the port to be used for ICCH TCP/IP Communication . This value is read from iccl.conf file. ICCH interface is a manually aggrega… |
| 1.3.6.1.4.1.29601.2.94.4.1.1.3 | ColumnfsIcclSessionIpAddress | read-write | current | This object is used to specify the IP Address to be used for ICCH TCP /IP communication . This IP address corresponds to the Layer 3 interface that will be cre… |
| 1.3.6.1.4.1.29601.2.94.4.1.1.4 | ColumnfsIcclSessionSubnetMask | read-write | current | This object is used to specify the Subnet Mask to be associated withIP Address to be used for ICCH TCP /IP communication. Configuring this object will result i… |
| 1.3.6.1.4.1.29601.2.94.4.1.1.5 | ColumnfsIcclSessionVlan | read-write | current | This object specifies the VLAN ID to be used for ICCH TCP /IP communication. Configuring this object will result in an update to iccl.conf file. The configured… |
| 1.3.6.1.4.1.29601.2.94.4.1.1.6 | ColumnfsIcclSessionNodeState | read-only | current | This object specifies the state of the node. The state of the node is decided after election by heart beat module. Election is based on the fsIcchIpAddress. |
| 1.3.6.1.4.1.29601.2.94.4.1.1.7 | ColumnfsIcclSessionRowStatus | read-write | current | This object specifies the row status of ICCH session table entry. Only 'CreateAndGo' and 'destroy' values are allowed for this object. The value 'CreateAndGo' … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FsIcchState | INTEGER { init(0), master(1), slave(2) } | current | The State of the node. |