ARICENT-ISS-EXT-MIB
63 objects
Added issExtL3FilterSynBit to IssExtL3FilterEntry
Imported Objects
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2076.81.8 | IdentityissExt | Added issExtL3FilterSynBit to IssExtL3FilterEntry | ||
| 1.3.6.1.4.1.2076.81.8.1 | NodeissExtRateControl | |||
| 1.3.6.1.4.1.2076.81.8.1.1 | TableissExtRateCtrlTable | not-accessible | current | A table to control the rate limiting parameters either for the entire switch or for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.2076.81.8.1.1.1 | RowissExtRateCtrlEntry | not-accessible | current | An entry appears in this table for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.2076.81.8.1.1.1.1 | ColumnissExtRateCtrlIndex | not-accessible | current | The interface index for which the configuration in this entry applies. |
| 1.3.6.1.4.1.2076.81.8.1.1.1.2 | ColumnissExtRateCtrlDLFLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of dlf packets that can be transmitted per second over this interface. Setting this object to the… |
| 1.3.6.1.4.1.2076.81.8.1.1.1.3 | ColumnissExtRateCtrlBCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of broadcast packets that can be transmitted per second over this interface. Setting this object … |
| 1.3.6.1.4.1.2076.81.8.1.1.1.4 | ColumnissExtRateCtrlMCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of multicast packets that can be transmitted per second over this interface. Setting this object … |
| 1.3.6.1.4.1.2076.81.8.1.1.1.5 | ColumnissExtRateCtrlPortRateLimit | read-write | current | Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interface speed.… |
| 1.3.6.1.4.1.2076.81.8.1.1.1.6 | ColumnissExtRateCtrlPortBurstSize | read-write | current | Configures interface Burst Pkt Rate. (Packet Burst that can be transferred on a port at a particular second) This object's value will take effect on the interf… |
| 1.3.6.1.4.1.2076.81.8.1.1.1.7 | ColumnissExtDefaultRateCtrlStatus | read-write | current | Allows to configure the per port status of storm control feature. when value is set as enabled, the packet rates for Broadcast, Multicast and Dlf packets will … |
| 1.3.6.1.4.1.2076.81.8.1.1.1.8 | ColumnissExtRateCtrlPortInputRestoreFilter | read-write | current | Object is used to restore rate limit input config |
| 1.3.6.1.4.1.2076.81.8.1.1.1.9 | ColumnissExtRateCtrlPortInputRateLimit | read-write | current | Configures interface Input Rate Limit. This object configures the input rate limit. The default value for the object is disabled. |
| 1.3.6.1.4.1.2076.81.8.2 | NodeissExtL2Filter | |||
| 1.3.6.1.4.1.2076.81.8.2.1 | TableissExtL2FilterTable | not-accessible | current | A table to configure L2 filter rules in the system. |
| 1.3.6.1.4.1.2076.81.8.2.1.1 | RowissExtL2FilterEntry | not-accessible | current | Each entry in this table is a L2 filter rule. Index to the table is the L2 filter number. |
| 1.3.6.1.4.1.2076.81.8.2.1.1.1 | ColumnissExtL2FilterNo | not-accessible | current | L2 Filter rule number. |
| 1.3.6.1.4.1.2076.81.8.2.1.1.2 | ColumnissExtL2FilterPriority | read-write | current | The priority of the L2 filter can be used to decide which filter rule is applicable when Higher value of 'filter priority' implies a higher priority. Usage of … |
| 1.3.6.1.4.1.2076.81.8.2.1.1.3 | ColumnissExtL2FilterEtherType | read-write | current | The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '0'. When this object is SET with t… |
| 1.3.6.1.4.1.2076.81.8.2.1.1.4 | ColumnissExtL2FilterProtocolType | read-write | current | Specifies the non IP protocol type to be filtered. aarp | amber | dec-spanning | decnet-iv | diagnostic | dsm |etype-6000 | etype-8042 | lat | lavc-sca | mop-c… |
| 1.3.6.1.4.1.2076.81.8.2.1.1.5 | ColumnissExtL2FilterDstMacAddr | read-write | current | Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero which means dont care condition ie) any Dst Mac Add… |
| 1.3.6.1.4.1.2076.81.8.2.1.1.6 | ColumnissExtL2FilterSrcMacAddr | read-write | current | Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero which means dont care condition ie) any Src Mac address |
| 1.3.6.1.4.1.2076.81.8.2.1.1.7 | ColumnissExtL2FilterVlanId | read-write | current | Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. A value of '0' means, this object is unused. Configuring… |
| 1.3.6.1.4.1.2076.81.8.2.1.1.8 | ColumnissExtL2FilterInPortList | read-write | current | Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list. If the In port list is '0', the filter rule is… |
| 1.3.6.1.4.1.2076.81.8.2.1.1.9 | ColumnissExtL2FilterAction | read-write | current | Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding r… |
| 1.3.6.1.4.1.2076.81.8.2.1.1.10 | ColumnissExtL2FilterMatchCount | read-only | current | Number of times this filter is matched. |
| 1.3.6.1.4.1.2076.81.8.2.1.1.11 | ColumnissExtL2FilterStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.2076.81.8.2.1.1.12 | ColumnissExtL2FilterOutPortList | read-write | current | Specifies the complete set of ports over which this filter is applied for packets egress at Ports in this list. If the Out port list is '0', the filter rule is… |
| 1.3.6.1.4.1.2076.81.8.2.1.1.13 | ColumnissExtL2FilterDirection | read-write | current | Specifies the direction of this filter to be applied. By Default the filter will be applied on ingress direction. When the direction of this filter is 'in', It… |
| 1.3.6.1.4.1.2076.81.8.2.1.1.14 | ColumnissExtL2FilterCfiDeiBit | read-write | current | Specifies the CfiDei bit value in the c-vlan tag or s-vlan tag of the packet to be applied in the filter. |
| 1.3.6.1.4.1.2076.81.8.2.1.1.15 | ColumnissExtL2FilterDP | read-write | current | Specifies the drop precedence level to be applied in the filter. |
| 1.3.6.1.4.1.2076.81.8.2.1.1.16 | ColumnissExtL2FilterDstMacAddrMask | read-write | current | This object specifies that the mask used to match the Destination MAC address with the packet. By Default, the Destination Mac Address Mask will be ff:ff:ff:ff… |
| 1.3.6.1.4.1.2076.81.8.2.1.1.17 | ColumnissExtL2FilterSrcMacAddrMask | read-write | current | This object specifies that the mask used to match the Source MAC address with the packet. By Default, the Source Mac Address Mask will be ff:ff:ff:ff:ff:ff whi… |
| 1.3.6.1.4.1.2076.81.8.3 | NodeissExtL3Filter | |||
| 1.3.6.1.4.1.2076.81.8.3.1 | TableissExtL3FilterTable | not-accessible | current | A table to configure L3 filter rules in the system. |
| 1.3.6.1.4.1.2076.81.8.3.1.1 | RowissExtL3FilterEntry | not-accessible | current | Each entry in this table is a L3 filter rule. Index to the table is L3 filter number. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.1 | ColumnissExtL3FilterNo | not-accessible | current | L3 Filter rule number. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.2 | ColumnissExtL3FilterPriority | read-write | current | The priority of the filter can be used to decide which filter rule is applicable when Higher value of 'L3 filter priority' implies a higher priority. Usage of … |
| 1.3.6.1.4.1.2076.81.8.3.1.1.3 | ColumnissExtL3FilterProtocol | read-write | current | The type of protocol to be checked against the packet. The default value is 255. If the value is 255, it means that the protocol type can be anything and it wi… |
| 1.3.6.1.4.1.2076.81.8.3.1.1.4 | ColumnissExtL3FilterMessageType | read-write | current | The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action s… |
| 1.3.6.1.4.1.2076.81.8.3.1.1.5 | ColumnissExtL3FilterMessageCode | read-write | current | The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action s… |
| 1.3.6.1.4.1.2076.81.8.3.1.1.6 | ColumnissExtL3FilterDstIpAddr | read-write | current | Destination IP address to be matched with the packet. This object is valid only if the 'issExtFilterType' is 'l3filter'. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.7 | ColumnissExtL3FilterSrcIpAddr | read-write | current | Source IP address to be matched with the packet. This object is valid only if the 'issExtFilterType' is 'l3filter'. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.8 | ColumnissExtL3FilterDstIpAddrMask | read-write | current | The IP subnet mask for Destination IP address. This object is valid only if the 'issExtFilterType' is 'l3filter'. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.9 | ColumnissExtL3FilterSrcIpAddrMask | read-write | current | The IP subnet mask for Source IP address. This object is valid only if the 'issExtFilterType' is 'l3filter'. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.10 | ColumnissExtL3FilterMinDstProtPort | read-write | current | The minimum port in the destination port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.11 | ColumnissExtL3FilterMaxDstProtPort | read-write | current | The maximum port in the destination port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.12 | ColumnissExtL3FilterMinSrcProtPort | read-write | current | The minimum port in the source port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.13 | ColumnissExtL3FilterMaxSrcProtPort | read-write | current | The maximum port in the source port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.14 | ColumnissExtL3FilterInPortList | read-write | current | Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable. If the incoming port list is '0', the filter rule is … |
| 1.3.6.1.4.1.2076.81.8.3.1.1.15 | ColumnissExtL3FilterOutPortList | read-write | current | Specifies the complete set of ports over which if the packet goes out, this filter rule will be applicable. If the outgoing port list is '0', the filter rule i… |
| 1.3.6.1.4.1.2076.81.8.3.1.1.16 | ColumnissExtL3FilterAckBit | read-create | current | The TCP ACK bit to be checked against the packet. The default value is 'any'(3). It means that ACK bit will not be checked to decide the action. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.17 | ColumnissExtL3FilterRstBit | read-create | current | The TCP RST bit to be checked against the packet. The default value is 'any'(3). It means that RST bit will not be checked to decide the action. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.18 | ColumnissExtL3FilterTos | read-create | current | The IP TOS bit to be checked against the packet. This is a single byte integer of which the last three bits (least significant bits) indicate Delay, Throughput… |
| 1.3.6.1.4.1.2076.81.8.3.1.1.19 | ColumnissExtL3FilterDscp | read-create | current | The IP Dscp value to be checked against the packet. A value of '-1' means, the Dscp Field becomes dont care. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.20 | ColumnissExtL3FilterDirection | read-write | current | Specifies the direction of this filter to be applied. By Default the filter will be applied on ingress direction. When the direction of this filter is 'in', It… |
| 1.3.6.1.4.1.2076.81.8.3.1.1.21 | ColumnissExtL3FilterAction | read-write | current | Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be sent to the ports in 'out port list'. I… |
| 1.3.6.1.4.1.2076.81.8.3.1.1.22 | ColumnissExtL3FilterMatchCount | read-only | current | Number of times this filter is matched. |
| 1.3.6.1.4.1.2076.81.8.3.1.1.23 | ColumnissExtL3FilterStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.2076.81.8.3.1.1.24 | ColumnissExtL3FilterSynBit | read-create | current | The TCP SYN bit to be checked against the packet. The default value is 'any'(3). It means that SYN bit will not be checked to decide the action. |
| 1.3.6.1.4.1.2076.81.8.5 | NodeissExtFilter | |||
| 1.3.6.1.4.1.2076.81.8.5.1 | ScalarissExtEgressFilterMode | read-write | current | This object indicates whether to supprt IP based or MAC based PCL at Egress. The value true indicates IP ACL and false indicates MAC ACL. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |