ARICENT-L2IPV6SNP-MIB
57 objects
The proprietary MIB for IPV6 control packet Snooping in Layer2 Switch. (a) Used to maintain the policy information to validate the RA messages and forward/block the same
Imported Objects
| IF-MIB | InterfaceIndex |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.122 | IdentityfsIpv6Snp | The proprietary MIB for IPV6 control packet Snooping in Layer2 Switch. (a) Used to maintain the policy information to validate the RA messages and forward/bloc… | ||
| 1.3.6.1.4.1.29601.2.122.1 | NodefsIpv6SnpSystem | |||
| 1.3.6.1.4.1.29601.2.122.1.1 | TablefsIpv6SnpSystemTable | not-accessible | current | Switch context specific parameters for IPv6 control packet snooping related features in Layer2 switch |
| 1.3.6.1.4.1.29601.2.122.1.1.1 | RowfsIpv6SnpSystemEntry | not-accessible | current | Each entry contains the fields ralated to RA-Guard feature enable/disable, traces |
| 1.3.6.1.4.1.29601.2.122.1.1.1.1 | ColumnfsIpv6SnpContexId | not-accessible | current | Identifies switch virtual context |
| 1.3.6.1.4.1.29601.2.122.1.1.1.2 | ColumnfsIpv6SnpSystemControl | read-write | current | The Administrative system control status of IPv6 control packet snooping module. start : Indicates that all resource required for this module are allocated. Co… |
| 1.3.6.1.4.1.29601.2.122.1.1.1.3 | ColumnfsIpv6SnpRagStatus | read-write | current | Object to enable/disable the RA Guard feature in the switch instance |
| 1.3.6.1.4.1.29601.2.122.1.1.1.4 | ColumnfsIpv6SnpTraceLevel | read-write | current | This object is to enable/disable the trace statements in IPv6 control packet snooping module The mapping between bit position and the level of trace is as foll… |
| 1.3.6.1.4.1.29601.2.122.2 | NodefsIpv6SnpRagPolicy | |||
| 1.3.6.1.4.1.29601.2.122.2.1 | TablefsIpv6SnpRagPolicyTable | not-accessible | current | This table contains policy match criteria to validate the legitimagte RA messages |
| 1.3.6.1.4.1.29601.2.122.2.1.1 | RowfsIpv6SnpRagPolicyEntry | not-accessible | current | Each entry contains the policy details. |
| 1.3.6.1.4.1.29601.2.122.2.1.1.1 | ColumnfsIpv6SnpRagPolicyId | not-accessible | current | Indicates the RA Guard Policy id. |
| 1.3.6.1.4.1.29601.2.122.2.1.1.2 | ColumnfsIpv6SnpRagDeviceRole | read-write | current | Indicates the role of the device host mode : All RA messages are disallowed and will be dropped Rotuer mode: RA messages are validated against the policy. |
| 1.3.6.1.4.1.29601.2.122.2.1.1.3 | ColumnfsIpv6SnpRagMbit | read-write | current | Enables verification of the advertised 'managed address configuration flag' to be on / off None : Indicates that validation of this field in RA message will be… |
| 1.3.6.1.4.1.29601.2.122.2.1.1.4 | ColumnfsIpv6SnpRagObit | read-write | current | Enables verification of the advertised 'other configuration flag' to be on / off None : Indicates that validation of this field in RA message will be bypassed. |
| 1.3.6.1.4.1.29601.2.122.2.1.1.5 | ColumnfsIpv6SnpMatchRagAclId | read-write | current | Configures the access list for the policy entry which is used to validate the source link layer address carried by RA message. Value 0 indicates that no access… |
| 1.3.6.1.4.1.29601.2.122.2.1.1.6 | ColumnfsIpv6SnpMatchRagPrefixListId | read-write | current | Configures the prefix list Id used to validate the source ipv6 address prefixes carried by RA message. Value 0 indicates that no IPV6 prefix list is associated… |
| 1.3.6.1.4.1.29601.2.122.2.1.1.7 | ColumnfsIpv6SnpMatchRagSrcIp6ListId | read-write | current | Configures the Src Ip6 list Id used to validate the source ipv6 address carried by RA message. Value 0 indicates that no Src Ip6 list is associated to the poli… |
| 1.3.6.1.4.1.29601.2.122.2.1.1.8 | ColumnfsIpv6SnpRagHopLimit | read-write | current | Value 0: Indicates that validation of this field in RA message will be bypassed Enables the validation of advertised hoplimit carried by RA massage and the val… |
| 1.3.6.1.4.1.29601.2.122.2.1.1.9 | ColumnfsIpv6SnpRagRouterPreference | read-write | current | Enables the validation of advertised router preference carried by RA massage to be low/medium/high. None : Indicates that validation of this field in RA messag… |
| 1.3.6.1.4.1.29601.2.122.2.1.1.10 | ColumnfsIpv6SnpRagPolicyRowStatus | read-create | current | This object is used to create or delete the entry in the RAG policy table. |
| 1.3.6.1.4.1.29601.2.122.2.2 | TablefsIpv6SnpRagACLTable | not-accessible | current | This table contains access list information to be set as match criteria in the RA Guard policy table to validate the incoming RA message |
| 1.3.6.1.4.1.29601.2.122.2.2.1 | RowfsIpv6SnpRagAclEntry | not-accessible | current | Each entry contains the information about access list |
| 1.3.6.1.4.1.29601.2.122.2.2.1.1 | ColumnfsIpv6SnpRagAclNo | not-accessible | current | Indicates the acl number for this entry. This acl number can be mapped to RA Guard policy entry to configure the matching criteria for the policy entry. |
| 1.3.6.1.4.1.29601.2.122.2.2.1.2 | ColumnfsIpv6SnpRagAclEntryNo | not-accessible | current | Indicates an entry associated with the acl number. For a single acl number, many entries can be created. Thus several MAC addresses can be associated to an acl… |
| 1.3.6.1.4.1.29601.2.122.2.2.1.3 | ColumnfsIpv6SnpRagAclSrcMacAddress | read-write | current | Indicates the source Mac address associated with the acl-id. |
| 1.3.6.1.4.1.29601.2.122.2.2.1.4 | ColumnfsIpv6SnpRagAclRowStatus | read-create | current | This object is used to create or delete entry in the RA guard acl table. |
| 1.3.6.1.4.1.29601.2.122.2.3 | Tablefsipv6SnpRagPrefixListTable | not-accessible | current | This table contains Ipv6 address Prefix list information that can be set as match criteria in the RA Guard policy entry. This can be used for validating the ip… |
| 1.3.6.1.4.1.29601.2.122.2.3.1 | RowfsIpv6SnpRagPrefixListEntry | not-accessible | current | Each entry contains the Ipv6 address Prefixes used to validate the prefix information carried in RA messages. |
| 1.3.6.1.4.1.29601.2.122.2.3.1.1 | ColumnfsIpv6SnpRagPrefixListNo | not-accessible | current | Indicates the Prefix-list number of this entry. This prefix-list number can be mapped to RA Guard policy entry to configure the matching criteria for the polic… |
| 1.3.6.1.4.1.29601.2.122.2.3.1.2 | ColumnfsIpv6SnpRagPrefixListEntryNo | not-accessible | current | Indicates entry number for each prefix. For a single prefix-list number, many entries can be created. Thus several prefixes can be associated to a prefix-list … |
| 1.3.6.1.4.1.29601.2.122.2.3.1.3 | ColumnfsIpv6SnpRagPrefixListPrefix | read-write | current | Ipv6 prefix value of this entry. |
| 1.3.6.1.4.1.29601.2.122.2.3.1.4 | ColumnfsIpv6SnpRagPrefixListLength | read-write | current | Indicates prefix length for each Ipv6 prefix |
| 1.3.6.1.4.1.29601.2.122.2.3.1.5 | ColumnfsIpv6SnpRagPrefixListGe | read-write | current | Minimum prefix length to be matched Value 0 indicates that no miminum prefix lenth, and this check would be bypassed |
| 1.3.6.1.4.1.29601.2.122.2.3.1.6 | ColumnfsIpv6SnpRagPrefixListLe | read-write | current | Maximum prefix length to be matched Value 0 indicates that no maximum prefix lenth, and this check would be bypassed |
| 1.3.6.1.4.1.29601.2.122.2.3.1.7 | ColumnfsIpv6SnpRagPrefixListRowStatus | read-create | current | This object is used to create or delete entry in the prefix list table. |
| 1.3.6.1.4.1.29601.2.122.2.4 | TablefsIpv6SnpRagPortTable | not-accessible | current | This table contains RA Guard interface specific configurations. |
| 1.3.6.1.4.1.29601.2.122.2.4.1 | RowfsIpv6SnpRagPortEntry | not-accessible | current | Each row in this table contains the RA guard configuration information for the interface. |
| 1.3.6.1.4.1.29601.2.122.2.4.1.1 | ColumnfsIpv6SnpRagPortNumber | not-accessible | current | Indicates the inteface index for which RA guard configurations are applied. |
| 1.3.6.1.4.1.29601.2.122.2.4.1.2 | ColumnfsIpv6SnpRagPortStatus | read-write | current | Object to enable/disable the RA Guard feature on the port |
| 1.3.6.1.4.1.29601.2.122.2.4.1.3 | ColumnfsIpv6SnpRagPortPolicyId | read-write | current | Indicates RA Guard policy ID applied to the interface. A value of 0 indicates that no policy is applied on the interface. |
| 1.3.6.1.4.1.29601.2.122.2.4.1.4 | ColumnfsIpv6SnpRagPortMode | read-write | current | Indicates the mode in which RA Guard functions on this interface. It can be stateful or stateless. |
| 1.3.6.1.4.1.29601.2.122.2.4.1.5 | ColumnfsIpv6SnpRagPortCurrentState | read-only | current | Indicates current state of the RA Guard on port while operating in stateful mode. In stateless mode of operation, this object is not applicble and indicates a … |
| 1.3.6.1.4.1.29601.2.122.2.4.1.6 | ColumnfsIpv6SnpRagPortTriggerStateChange | read-write | current | This objects allows manual triggering for movement of port state to learning/forwarding or blocking. This object is applicable when RA guard feature works in s… |
| 1.3.6.1.4.1.29601.2.122.2.4.1.7 | ColumnfsIpv6SnpRagPortLearnTime | read-write | current | When the port state change is triggered to 'learn', the port remains in the learning state for the 'Learn Time' duration. After this time, the port state moves… |
| 1.3.6.1.4.1.29601.2.122.2.4.1.8 | ColumnfsIpv6SnpRagPortTrustState | read-write | current | Indicates RA guard port trust state as trusted/untrusted. trusted : RA messages will be forwarded without any validation untrusted : RA messages will be forwar… |
| 1.3.6.1.4.1.29601.2.122.2.4.1.9 | ColumnfsIpv6SnpRagPortVlanlist | read-write | current | This object indicates the list of VLAN on which the RA guard feature is applicable. When VLAN list is NULL, the RA guard configurations are applicable at port … |
| 1.3.6.1.4.1.29601.2.122.2.4.1.10 | ColumnfsIpv6SnpRagPortRowStatus | read-create | current | This object is used to create or delete entry in the table |
| 1.3.6.1.4.1.29601.2.122.2.5 | TablefsIPv6SnpRagSrcIPv6ListTable | not-accessible | current | This table contains Src Ipv6 Prefix List information that can be set as match criteria in the RA Guard policy entry. This can be used for validating the Src IP… |
| 1.3.6.1.4.1.29601.2.122.2.5.1 | RowfsIpv6SnpRagSrcIPv6ListEntry | not-accessible | current | Each entry contains the Src Ipv6 Prefixes used to validate the prefix information carried in RA messages. |
| 1.3.6.1.4.1.29601.2.122.2.5.1.1 | ColumnfsIpv6SnpRagSrcIPv6ListNo | not-accessible | current | Indicates the Src IPv6 Prefix-list number of this entry The Src IPv6 Prefix List number can be mapped to RA Guard policy entry to configure the matching criter… |
| 1.3.6.1.4.1.29601.2.122.2.5.1.2 | ColumnfsIpv6SnpRagSrcIPv6EntryNo | not-accessible | current | Indicates entry number for each Src IPv6 prefix. For a single Src IPv6 prefix-list number, many entries can be created. Thus several Src IPv6 prefixes can be a… |
| 1.3.6.1.4.1.29601.2.122.2.5.1.3 | ColumnfsIpv6SnpRagSrcIPv6Addr | read-write | current | Src Ipv6 prefix value of this entry |
| 1.3.6.1.4.1.29601.2.122.2.5.1.4 | ColumnfsIpv6SnpRagSrcIPv6PrefixLength | read-write | current | Indicates prefix length for each Src Ipv6 prefix |
| 1.3.6.1.4.1.29601.2.122.2.5.1.5 | ColumnfsIpv6SnpRagSrcIPv6RowStatus | read-create | current | This object is used to create or delete entry in the Src IPv6 Prefix List table. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Ipv6AddressPrefix | OCTET STRING (SIZE (16)) | current | This data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order. |
| VlanList | OCTET STRING | current | Each octet within this value specifies a set of eight vlans, with the first octet specifying vlan 1 through 8, the second octet specifying vlan 9 through 16, etc. Within each octet, the most significant bit represents t… |