ARICENT-LBD-MIB
18 objects
This proprietary MIB module for loopback detection feature.
Imported Objects
| IF-MIB | ifIndex |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.123 | IdentityfutureLbdMIB | This proprietary MIB module for loopback detection feature. | ||
| 1.3.6.1.4.1.29601.2.123.1 | NodefsLbdSystems | |||
| 1.3.6.1.4.1.29601.2.123.1.1 | ScalarfsLbdSystemControl | read-write | current | The administrative system control status of Loopback Detection feature. The value 'start' (1) indicates that all resources required by the module should be all… |
| 1.3.6.1.4.1.29601.2.123.1.2 | ScalarfsLbdModuleStatus | read-write | current | The administrative module status of Loopback Detection feature. This enables or disables Loopback Detection in the system . A value of 'enabled' (1) indicates … |
| 1.3.6.1.4.1.29601.2.123.1.3 | ScalarfsLbdTransmitInterval | read-write | current | This object specifies the time interval(in seconds) between two consecutive Loop Back Detection (LBD) PDUs |
| 1.3.6.1.4.1.29601.2.123.1.4 | ScalarfsLbdDestMacAddress | read-write | current | This object is used to configure the destination MAC address of the Loop Back Detection PDUS. By default broadcast address is used as destination MAC address i… |
| 1.3.6.1.4.1.29601.2.123.1.5 | ScalarfsLbdTraceOption | read-write | current | This object is used to enable trace statements in Loopback detection module. The mapping between the bit positions & the level of trace is as follows: 1 - Cont… |
| 1.3.6.1.4.1.29601.2.123.2 | NodefsLbdConfig | |||
| 1.3.6.1.4.1.29601.2.123.2.1 | TablefsLbdPortTable | not-accessible | current | This table contains Loop Back Detection related configuration and statistics at port level. |
| 1.3.6.1.4.1.29601.2.123.2.1.1 | RowfsLbdPortEntry | not-accessible | current | Each entry in this table contains Loop Back Detection related configuration and statistics for a port. |
| 1.3.6.1.4.1.29601.2.123.2.1.1.1 | ColumnfsLbdPortId | not-accessible | current | This object specifies the Inteface index over which Loopback detection is connected |
| 1.3.6.1.4.1.29601.2.123.2.1.1.2 | ColumnfsLbdLoopDetectStatus | read-write | current | This object is used to enable or disable the Loopback detection functionality in the port. A value of 'enabled' (1) indicates that Loopback detection functiona… |
| 1.3.6.1.4.1.29601.2.123.2.1.1.3 | ColumnfsLbdTxCount | read-only | current | This object specifies the number of LPD PDUs transmitted out of the port. |
| 1.3.6.1.4.1.29601.2.123.2.1.1.4 | ColumnfsLbdRxCount | read-only | current | This object specifies the number of LPD PDUs received on the port. |
| 1.3.6.1.4.1.29601.2.123.2.1.1.5 | ColumnfsLbdPortStatus | read-only | current | This object indicates the current condition of the network connected to the port. 'noloopback' indicates that loop back condition is not detected in the networ… |
| 1.3.6.1.4.1.29601.2.123.2.1.1.6 | ColumnfsLbdPktTxFromPort | read-only | current | This object indicates the 'port-number' that was present in the received LBD PDU. This port-number may be the potential port causing the loop condition in the … |
| 1.3.6.1.4.1.29601.2.123.2.1.1.7 | ColumnfsLbdPortRowStatus | read-write | current | Row status for the Port Entry |
| 1.3.6.1.4.1.29601.2.123.2.1.1.8 | ColumnfsLbdClearStats | read-write | current | This object is used to clear the statistics of port. When this object is set to 'true', it will clear the statistics of the port and reverts back to 'false' |