ARICENT-LLDP-MED-MIB
76 objects
The proprietary MIB module for LLDP MED.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.101 | IdentityfsLldpMed | The proprietary MIB module for LLDP MED. | ||
| 1.3.6.1.4.1.29601.2.101.1 | NodefsLldpMedLocalConfig | |||
| 1.3.6.1.4.1.29601.2.101.1.1 | TablefsLldpMedPortConfigTable | not-accessible | current | This table controls the selection of LLDP-MED TLVs to be transmitted on individual ports. |
| 1.3.6.1.4.1.29601.2.101.1.1.1 | RowfsLldpMedPortConfigEntry | not-accessible | current | This object specifies the LLDP-MED configuration information that controls the transmission of the MED organizationally defined TLVs on LLDP transmission capab… |
| 1.3.6.1.4.1.29601.2.101.1.1.1.1 | ColumnfsLldpMedPortCapSupported | read-only | current | This object specifies the bitmap that includes the MED organizationally defined a set of LLDP TLVs whose transmission is possible for the respective port on th… |
| 1.3.6.1.4.1.29601.2.101.1.1.1.2 | ColumnfsLldpMedPortConfigTLVsTxEnable | read-write | current | This object includes the MED organizationally defined a set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each … |
| 1.3.6.1.4.1.29601.2.101.1.2 | TablefsLldpMedLocMediaPolicyTable | not-accessible | current | This table contains one row per policy type per port of media policy information (as a part of the MED organizational extension) on the local system known to t… |
| 1.3.6.1.4.1.29601.2.101.1.2.1 | RowfsLldpMedLocMediaPolicyEntry | not-accessible | current | This object specifies information about a particular policy on a specific port component. |
| 1.3.6.1.4.1.29601.2.101.1.2.1.1 | ColumnfsLldpMedLocMediaPolicyAppType | not-accessible | current | This object specifies the media type that defines the primary function of the application for the policy advertised by an endpoint. |
| 1.3.6.1.4.1.29601.2.101.1.2.1.2 | ColumnfsLldpMedLocMediaPolicyVlanID | read-write | current | This object specifies an extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVI… |
| 1.3.6.1.4.1.29601.2.101.1.2.1.3 | ColumnfsLldpMedLocMediaPolicyPriority | read-write | current | This object contains the value of the 802.1p priority which is associated with the given port on the local system. |
| 1.3.6.1.4.1.29601.2.101.1.2.1.4 | ColumnfsLldpMedLocMediaPolicyDscp | read-write | current | This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port… |
| 1.3.6.1.4.1.29601.2.101.1.2.1.5 | ColumnfsLldpMedLocMediaPolicyUnknown | read-write | current | This object indicates that the network policy for the specified application type is currently unknown when the value is set as 'true'. In this case, the VLAN I… |
| 1.3.6.1.4.1.29601.2.101.1.2.1.6 | ColumnfsLldpMedLocMediaPolicyTagged | read-write | current | This object indicates that the application is using a tagged VLAN when the value set as 'true'. This object indicates that for the specific application the dev… |
| 1.3.6.1.4.1.29601.2.101.1.2.1.7 | ColumnfsLldpMedLocMediaPolicyRowStatus | read-create | current | This object creates, modifies, and/or deletes a row in the table. All the objects in a row can be modified only when the value of this object in the correspond… |
| 1.3.6.1.4.1.29601.2.101.1.3 | TablefsLldpMedLocLocationTable | not-accessible | current | This table specifies the augmented MIB of lldpXMedLocLocationTable. Currently, this MIB table contains Row Status object to control the creation, deletion and … |
| 1.3.6.1.4.1.29601.2.101.1.3.1 | RowfsLldpMedLocLocationEntry | not-accessible | current | This object is used to augment the lldpXMedLocLocationEntry of the LLDP-EXT-MED-MIB, therefore it is only present along with the location configuration defined… |
| 1.3.6.1.4.1.29601.2.101.1.3.1.1 | ColumnfsLldpMedLocLocationRowStatus | read-create | current | This object is used to create, modify, and/or delete a row in the table. All the objects in a row can be modified only when the value of this object in the cor… |
| 1.3.6.1.4.1.29601.2.101.2 | NodefsLldpMedRemoteConfig | |||
| 1.3.6.1.4.1.29601.2.101.2.1 | TablefsLldpXMedRemCapabilitiesTable | not-accessible | current | This table displays LLDP-MED capabilities of remote devices connected to individual ports. |
| 1.3.6.1.4.1.29601.2.101.2.1.1 | RowfsLldpXMedRemCapabilitiesEntry | not-accessible | current | This object specifies LLDP-MED capabilities of remote devices connected to the device ports and communicating via LLDP-MED. The remote tables in the LLDP-MED M… |
| 1.3.6.1.4.1.29601.2.101.2.1.1.1 | ColumnfsLldpXMedRemCapSupported | read-only | current | This object specifies the bitmap that includes the MED organizationally defined a set of LLDP TLVs whose transmission is possible on the LLDP agent of the remo… |
| 1.3.6.1.4.1.29601.2.101.2.1.1.2 | ColumnfsLldpXMedRemCapCurrent | read-only | current | This object specifies the bitmap that includes the MED organizationally defined a set of LLDP TLVs whose transmission is possible on the LLDP agent of the remo… |
| 1.3.6.1.4.1.29601.2.101.2.1.1.3 | ColumnfsLldpXMedRemDeviceClass | read-only | current | This object specifies a device Class as advertised by the device remotely connected to the port. |
| 1.3.6.1.4.1.29601.2.101.2.2 | TablefsLldpXMedRemMediaPolicyTable | not-accessible | current | This table contains media policy information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only … |
| 1.3.6.1.4.1.29601.2.101.2.2.1 | RowfsLldpXMedRemMediaPolicyEntry | not-accessible | current | This object specifies information about the per port per policy type policy information for a particular physical network connection. |
| 1.3.6.1.4.1.29601.2.101.2.2.1.1 | ColumnfsLldpXMedRemMediaPolicyAppType | not-accessible | current | This object specifies the media type that defines the primary function of the application for the policy advertised by the endpoint connected remotely to this … |
| 1.3.6.1.4.1.29601.2.101.2.2.1.2 | ColumnfsLldpXMedRemMediaPolicyVlanID | read-only | current | This object specifies an extension of the VLAN Identifier for the remote system connected to this port, as defined in IEEE 802.1P-1998. A value of 1 through 40… |
| 1.3.6.1.4.1.29601.2.101.2.2.1.3 | ColumnfsLldpXMedRemMediaPolicyPriority | read-only | current | This object contains the value of the 802.1p priority which is associated with the remote system connected at given port. |
| 1.3.6.1.4.1.29601.2.101.2.2.1.4 | ColumnfsLldpXMedRemMediaPolicyDscp | read-only | current | This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with remote system … |
| 1.3.6.1.4.1.29601.2.101.2.2.1.5 | ColumnfsLldpXMedRemMediaPolicyUnknown | read-only | current | This object indicates that the network policy for the specified application type is currently unknown when the value is set as 'true'. In this case, the VLAN I… |
| 1.3.6.1.4.1.29601.2.101.2.2.1.6 | ColumnfsLldpXMedRemMediaPolicyTagged | read-only | current | This object indicates that the application is using a tagged VLAN when the value is set as 'true'. This object indicates that for the specific application the … |
| 1.3.6.1.4.1.29601.2.101.2.3 | TablefsLldpXMedRemInventoryTable | not-accessible | current | This table contains inventory information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only if … |
| 1.3.6.1.4.1.29601.2.101.2.3.1 | RowfsLldpXMedRemInventoryEntry | not-accessible | current | This object specifies information about inventory information for the remote devices connected to the ports. |
| 1.3.6.1.4.1.29601.2.101.2.3.1.1 | ColumnfsLldpXMedRemHardwareRev | read-only | current | This object specifies the vendor-specific hardware revision string as advertised by the remote endpoint. |
| 1.3.6.1.4.1.29601.2.101.2.3.1.2 | ColumnfsLldpXMedRemFirmwareRev | read-only | current | This object specifies the vendor-specific firmware revision string as advertised by the remote endpoint. |
| 1.3.6.1.4.1.29601.2.101.2.3.1.3 | ColumnfsLldpXMedRemSoftwareRev | read-only | current | This object specifies the vendor-specific software revision string as advertised by the remote endpoint. |
| 1.3.6.1.4.1.29601.2.101.2.3.1.4 | ColumnfsLldpXMedRemSerialNum | read-only | current | This object specifies the vendor-specific serial number as advertised by the remote endpoint. |
| 1.3.6.1.4.1.29601.2.101.2.3.1.5 | ColumnfsLldpXMedRemMfgName | read-only | current | This object specifies the vendor-specific manufacturer name as advertised by the remote endpoint. |
| 1.3.6.1.4.1.29601.2.101.2.3.1.6 | ColumnfsLldpXMedRemModelName | read-only | current | This object specifies the vendor-specific model name as advertised by the remote endpoint. |
| 1.3.6.1.4.1.29601.2.101.2.3.1.7 | ColumnfsLldpXMedRemAssetID | read-only | current | This object specifies the vendor-specific asset tracking identifier as advertised by the remote endpoint. |
| 1.3.6.1.4.1.29601.2.101.2.4 | TablefsLldpXMedRemLocationTable | not-accessible | current | This table contains Location information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only if t… |
| 1.3.6.1.4.1.29601.2.101.2.4.1 | RowfsLldpXMedRemLocationEntry | not-accessible | current | This object specifies information about Location information for the remote devices connected to the ports. |
| 1.3.6.1.4.1.29601.2.101.2.4.1.1 | ColumnfsLldpXMedRemLocationInfo | read-only | current | This object specifies the location information advertised by the remote endpoint. Parsing of this information is dependent upon the location subtype, as define… |
| 1.3.6.1.4.1.29601.2.101.2.5 | TablefsLldpXMedRemXPoEPDTable | not-accessible | current | This table contains extended PoE information as advertised by the remote devices of PD type. This table may be sparsely populated. Entries in this table are re… |
| 1.3.6.1.4.1.29601.2.101.2.5.1 | RowfsLldpXMedRemXPoEPDEntry | not-accessible | current | Information about XPoEPD information for the remote devices connected to the ports. |
| 1.3.6.1.4.1.29601.2.101.2.5.1.1 | ColumnfsLldpXMedRemXPoEDeviceType | read-only | current | Defines the type of Power-via-MDI (Power over Ethernet) advertised by the remote device. A value pseDevice(2) indicates that the device is advertised as a Powe… |
| 1.3.6.1.4.1.29601.2.101.2.5.1.2 | ColumnfsLldpXMedRemXPoEPDPowerReq | read-only | current | This object contains the value of the power required by a PD connected remotely to the port expressed in units of 0.1 watts. |
| 1.3.6.1.4.1.29601.2.101.2.5.1.3 | ColumnfsLldpXMedRemXPoEPDPowerSource | read-only | current | This object specifies the type of Power Source advertised as being used by the device connected remotely to the port. A value fromPSE(2) indicates that the dev… |
| 1.3.6.1.4.1.29601.2.101.2.5.1.4 | ColumnfsLldpXMedRemXPoEPDPowerPriority | read-only | current | This object specifies the priority advertised as being required by the PD connected remotely to the port. A value critical(2) indicates that the device adverti… |
| 1.3.6.1.4.1.29601.2.101.3 | NodefsLldpMedStatistics | |||
| 1.3.6.1.4.1.29601.2.101.3.1 | TablefsLldpMedStatsTable | not-accessible | current | This table containing LLDP MED transmission statistics for individual port/destination address combinations. |
| 1.3.6.1.4.1.29601.2.101.3.1.1 | RowfsLldpMedStatsEntry | not-accessible | current | This object specifies LLDP MED frame transmission statistics for a particular port and destination MAC address. All counter values in a particular entry shall … |
| 1.3.6.1.4.1.29601.2.101.3.1.1.1 | ColumnfsLldpMedStatsIfIndex | not-accessible | current | This object specifies the interface index value that is used to identify the port associated with this entry. Its value is an index into the interfaces MIB The… |
| 1.3.6.1.4.1.29601.2.101.3.1.1.2 | ColumnfsLldpMedStatsDestMACAddress | not-accessible | current | This object specifies the index value that is used to identify the destination MAC address associated with this entry. Its value identifies the row in the lldp… |
| 1.3.6.1.4.1.29601.2.101.3.1.1.3 | ColumnfsLldpMedStatsTxFramesTotal | read-only | current | This object specifies the number of LLDP-MED frames transmitted by the LLDP agent on the indicated port to the destination MAC address associated with this row… |
| 1.3.6.1.4.1.29601.2.101.3.1.1.4 | ColumnfsLldpMedStatsRxFramesTotal | read-only | current | This object specifies the number of valid LLDP-MED frames received by the LLDP agent on the indicated port, while this LLDP agent is enabled. |
| 1.3.6.1.4.1.29601.2.101.3.1.1.5 | ColumnfsLldpMedStatsRxFramesDiscardedTotal | read-only | current | This object specifies the number of LLDP-MED frames received by the LLDP agent on the indicated port, and then discarded for any reason. This counter can provi… |
| 1.3.6.1.4.1.29601.2.101.3.1.1.6 | ColumnfsLldpMedStatsRxTLVsDiscardedTotal | read-only | current | This object specifies the number of LLDP-MED TLVs discarded for any reason by the LLDP agent on the indicated port. |
| 1.3.6.1.4.1.29601.2.101.3.1.1.7 | ColumnfsLldpMedStatsRxCapTLVsDiscarded | read-only | current | This object specifies the number of LLDP MED Capability TLVs discarded for any reason by this LLDP agent on the indicated port. |
| 1.3.6.1.4.1.29601.2.101.3.1.1.8 | ColumnfsLldpMedStatsRxPolicyTLVsDiscarded | read-only | current | This object specifies the number of LLDP MED Network Policy TLVs discarded for any reason by this LLDP agent on the indicated port. |
| 1.3.6.1.4.1.29601.2.101.3.1.1.9 | ColumnfsLldpMedStatsRxInventoryTLVsDiscarded | read-only | current | This object specifies the number of LLDP MED Inventory TLVs discarded for any reason by this LLDP agent on the indicated port. |
| 1.3.6.1.4.1.29601.2.101.3.1.1.10 | ColumnfsLldpMedStatsRxLocationTLVsDiscarded | read-only | current | This object specifies the number of LLDP MED Location TLVs discarded for any reason by this LLDP agent on the indicated port. |
| 1.3.6.1.4.1.29601.2.101.3.1.1.11 | ColumnfsLldpMedStatsRxExPowerMDITLVsDiscarded | read-only | current | This object specifies the number of LLDP MED Extended Power Via MDI TLVs discarded for any reason by this LLDP agent on the indicated port. |
| 1.3.6.1.4.1.29601.2.101.3.1.1.12 | ColumnfsLldpMedStatsRxCapTLVsDiscardedReason | read-only | current | This object specifies the reason for last discarded LLDP MED Capability TLV |
| 1.3.6.1.4.1.29601.2.101.3.1.1.13 | ColumnfsLldpMedStatsRxPolicyDiscardedReason | read-only | current | This object specifies the reason for last discarded LLDP MED Network Policy TLV |
| 1.3.6.1.4.1.29601.2.101.3.1.1.14 | ColumnfsLldpMedStatsRxInventoryDiscardedReason | read-only | current | This object specifies the reason for last discarded LLDP MED Inventory TLV |
| 1.3.6.1.4.1.29601.2.101.3.1.1.15 | ColumnfsLldpMedStatsRxLocationDiscardedReason | read-only | current | This object specifies the reason for last discarded LLDP MED Location Identification TLV |
| 1.3.6.1.4.1.29601.2.101.3.1.1.16 | ColumnfsLldpMedStatsRxExPowerDiscardedReason | read-only | current | This object specifies the reason for last discarded LLDP MED Extended Power-via-MDI TLV |
| 1.3.6.1.4.1.29601.2.101.3.2 | ScalarfsLldpMedClearStats | read-write | current | This object clears all the LLDP MED Counters and assigns FALSE to it when it is set to TRUE. The default value of this object is FALSE |
| 1.3.6.1.4.1.29601.2.101.4 | NodefsLldpMedNotification | |||
| 1.3.6.1.4.1.29601.2.101.4.0 | NodefsLldpMedTraps | |||
| 1.3.6.1.4.1.29601.2.101.4.0.1 | NotificationfsLldpMedPolicyMismatch | current | This object specifies the notification that is generated when the policy mismatch is observed in between local and remote media end devices | |
| 1.3.6.1.4.1.29601.2.101.5 | NodefsLldpMedNotifyObjects | |||
| 1.3.6.1.4.1.29601.2.101.5.1 | NodefsLldpMedTrapObjects | |||
| 1.3.6.1.4.1.29601.2.101.5.1.1 | ScalarfsLldpXMedMediaPolicyAppType | accessible-for-notify | current | This object specifies the media type that defines the primary function of the application for the policy advertised by an endpoint. |