ARICENT-MIOSPFV3-MIB
162 objects
The Proprietary MI OSPF3 MIB modified from FS OSPF3 MIB
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.24 | IdentityfsMIOspfv3 | The Proprietary MI OSPF3 MIB modified from FS OSPF3 MIB | ||
| 1.3.6.1.4.1.29601.2.24.1 | NodefsMIOspfv3GeneralGroup | |||
| 1.3.6.1.4.1.29601.2.24.1.1 | ScalarfsMIOspfv3GlobalTraceLevel | read-write | current | |
| 1.3.6.1.4.1.29601.2.24.1.2 | ScalarfsMIOspfv3VrfSpfInterval | read-write | current | Minimum time between two consecutive SPF calculations across two ospf instances. Time is configured in milli seconds. |
| 1.3.6.1.4.1.29601.2.24.1.3 | ScalarfsMIOspfv3RTStaggeringStatus | read-write | current | This object indicates the status of route table calculation staggering option |
| 1.3.6.1.4.1.29601.2.24.1.4 | ScalarfsMIOspfv3HotStandbyAdminStatus | read-only | current | High Availabilty feature enabled or disabled in OSPFv3 |
| 1.3.6.1.4.1.29601.2.24.1.5 | ScalarfsMIOspfv3HotStandbyState | read-only | current | Internal State of the OSPFv3 instance init(1) - OSPFv3 instance is up and RM State is undetermined. activeStandbyUp(2) - The RM state is active & standby is up… |
| 1.3.6.1.4.1.29601.2.24.1.6 | ScalarfsMIOspfv3DynamicBulkUpdStatus | read-only | current | Status of dynamic bulk update between active and dynamic OSPFv3 instance. notStarted(1): Dynamic Bulk Update has not started. inProgress(2): Dynamic Bulk Updat… |
| 1.3.6.1.4.1.29601.2.24.1.7 | ScalarfsMIOspfv3StandbyHelloSyncCount | read-only | current | Total number of hello packets synced to standby node. |
| 1.3.6.1.4.1.29601.2.24.1.8 | ScalarfsMIOspfv3StandbyLsaSyncCount | read-only | current | Total number of LSAs synced to standby node. |
| 1.3.6.1.4.1.29601.2.24.2 | TablefsMIOspfv3Table | not-accessible | current | Information describing the parameters of router's instances |
| 1.3.6.1.4.1.29601.2.24.2.1 | RowfsMIOspfv3Entry | not-accessible | current | Information describing the parameters of one of the router's instances |
| 1.3.6.1.4.1.29601.2.24.2.1.1 | ColumnfsMIOspfv3OverFlowState | read-only | current | Indicates whether router is in overflow state or not. |
| 1.3.6.1.4.1.29601.2.24.2.1.2 | ColumnfsMIOspfv3TraceLevel | read-write | current | |
| 1.3.6.1.4.1.29601.2.24.2.1.3 | ColumnfsMIOspfv3ABRType | read-write | current | Different Types of ABRs supported |
| 1.3.6.1.4.1.29601.2.24.2.1.4 | ColumnfsMIOspfv3NssaAsbrDefRtTrans | read-write | current | Specifies the P-Bit setting for the default Type-7 LSA generated by ASBR(which is not ABR).When set disabled, P-Bit is clear in the generated default Lsa. When… |
| 1.3.6.1.4.1.29601.2.24.2.1.5 | ColumnfsMIOspfv3DefaultPassiveInterface | read-write | current | When set to true all OSPF interfaces created after this setting will be passive interfaces. If set to false OSPF interfaces created after this setting will not… |
| 1.3.6.1.4.1.29601.2.24.2.1.6 | ColumnfsMIOspfv3SpfDelay | read-write | current | The Delay at which routing calculation is carried after a topology change. |
| 1.3.6.1.4.1.29601.2.24.2.1.7 | ColumnfsMIOspfv3SpfHoldTime | read-write | current | The minimum time between two consecutive SPF calculations. |
| 1.3.6.1.4.1.29601.2.24.2.1.8 | ColumnfsMIOspfv3RTStaggeringInterval | read-write | current | This object denotes the time interval in milliseconds after which the route calculation is suspended for doing all other OSPFv3 operations. Refault value of th… |
| 1.3.6.1.4.1.29601.2.24.2.1.9 | ColumnfsMIOspfv3RestartStrictLsaChecking | read-write | current | Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile … |
| 1.3.6.1.4.1.29601.2.24.2.1.10 | ColumnfsMIOspfv3HelperSupport | read-write | current | The router's helper support for OSPFv3 graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. fsMIOspfv3HelperSupport i… |
| 1.3.6.1.4.1.29601.2.24.2.1.11 | ColumnfsMIOspfv3HelperGraceTimeLimit | read-write | current | Configured OSPFv3 graceful restart interval limit in helper side. Time is configured in seconds. If this object is set to 0, then the helper accepts the restar… |
| 1.3.6.1.4.1.29601.2.24.2.1.12 | ColumnfsMIOspfv3RestartAckState | read-write | current | Indicates Reception required / not-required . whether GraceLSAs sent by this router are expected to be acknowledged by peers. This object is persistent and whe… |
| 1.3.6.1.4.1.29601.2.24.2.1.13 | ColumnfsMIOspfv3GraceLsaRetransmitCount | read-write | current | Number of retransmissions for unacknowledged GraceLSAs |
| 1.3.6.1.4.1.29601.2.24.2.1.14 | ColumnfsMIOspfv3RestartReason | read-write | current | The router's restarter reason code of OSPFv3 graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. This object is pers… |
| 1.3.6.1.4.1.29601.2.24.2.1.15 | ColumnfsMIOspfv3ExtTraceLevel | read-write | current | |
| 1.3.6.1.4.1.29601.2.24.2.1.16 | ColumnfsMIOspfv3SetTraps | read-write | current | This object is used to enable and disable specific OSPFv3 traps. Currently the following are defined 0x00000000 - Traps are not enabled. 0x00000001 - Restartin… |
| 1.3.6.1.4.1.29601.2.24.2.1.17 | ColumnfsMIOspfv3BfdStatus | read-write | current | This object enables/disables BFD feature in OSPFv3. If enabled, OSPFv3 registers with BFD for neighbor IP path monitoring |
| 1.3.6.1.4.1.29601.2.24.2.1.18 | ColumnfsMIOspfv3BfdAllIfState | read-write | current | This object enables/disables BFD for all OSPFv3 interfaces. If enabled, OSPFv3 registers with BFD for neighbor IP path monitoring, when the OSPFv3 neighbor sta… |
| 1.3.6.1.4.1.29601.2.24.3 | TablefsMIOspfv3IfTable | not-accessible | current | The OSPFv3 Interface Table describes the inter- faces from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.29601.2.24.3.1 | RowfsMIOspfv3IfEntry | not-accessible | current | The OSPFv3 Interface Entry describes one inter- face from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.29601.2.24.3.1.1 | ColumnfsMIOspfv3IfIndex | not-accessible | current | The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured. |
| 1.3.6.1.4.1.29601.2.24.3.1.2 | ColumnfsMIOspfv3IfOperState | read-only | current | This gives the Operational Status of the Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.3 | ColumnfsMIOspfv3IfPassive | read-write | current | This object is used to make the inteface as passive. If set to TRUE, then interface will be passive If set to FALSE then interface will be normal |
| 1.3.6.1.4.1.29601.2.24.3.1.4 | ColumnfsMIOspfv3IfNbrCount | read-only | current | This gives the Total number of Neighbour's through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.5 | ColumnfsMIOspfv3IfAdjCount | read-only | current | This gives the Total number of Adjacencies through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.6 | ColumnfsMIOspfv3IfHelloRcvd | read-only | current | This gives the Total number of Hello packets received through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.7 | ColumnfsMIOspfv3IfHelloTxed | read-only | current | This gives the Total number of Hello packets transmitted through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.8 | ColumnfsMIOspfv3IfHelloDisd | read-only | current | This gives the Total number of Hello packets discarded through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.9 | ColumnfsMIOspfv3IfDdpRcvd | read-only | current | This gives the Total number of Ddp packets received through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.10 | ColumnfsMIOspfv3IfDdpTxed | read-only | current | This gives the Total number of Ddp packets transmitted through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.11 | ColumnfsMIOspfv3IfDdpDisd | read-only | current | This gives the Total number of Ddp packets discarded through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.12 | ColumnfsMIOspfv3IfLrqRcvd | read-only | current | This gives the Total number of Lrq packets received through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.13 | ColumnfsMIOspfv3IfLrqTxed | read-only | current | This gives the Total number of Lrq packets transmitted through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.14 | ColumnfsMIOspfv3IfLrqDisd | read-only | current | This gives the Total number of Lrq packets discarded through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.15 | ColumnfsMIOspfv3IfLsuRcvd | read-only | current | This gives the Total number of Lsu packets received through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.16 | ColumnfsMIOspfv3IfLsuTxed | read-only | current | This gives the Total number of Lsu packets transmitted through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.17 | ColumnfsMIOspfv3IfLsuDisd | read-only | current | This gives the Total number of Lsu packets discarded through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.18 | ColumnfsMIOspfv3IfLakRcvd | read-only | current | This gives the Total number of Lak packets received through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.19 | ColumnfsMIOspfv3IfLakTxed | read-only | current | This gives the Total number of Lak packets transmitted through that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.20 | ColumnfsMIOspfv3IfLakDisd | read-only | current | This gives the Total number of Lak packets discarded on that Interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.21 | ColumnfsMIOspfv3IfContextId | read-only | current | A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized durin… |
| 1.3.6.1.4.1.29601.2.24.3.1.22 | ColumnfsMIOspfv3IfLinkLSASuppression | read-write | current | Specifies whether or not link LSA origination is suppressed for networks other than broadcast or NBMA. The object is set to value true (1) to suppress the orig… |
| 1.3.6.1.4.1.29601.2.24.3.1.23 | ColumnfsMIOspfv3IfBfdState | read-write | current | This object enables/disables BFD in a specific OSPFv3 interface. This object is set to be enabled internally for particular interface entry when fsMIOspfv3BfdA… |
| 1.3.6.1.4.1.29601.2.24.3.1.24 | ColumnfsMIOspfv3IfCryptoAuthType | read-write | current | This object specifies the SHA crypto authentication type to be used on the interface |
| 1.3.6.1.4.1.29601.2.24.3.1.25 | ColumnfsMIOspfv3IfCryptoAuthMode | read-write | current | This object specifies the crypto authentication mode to be used on the interface |
| 1.3.6.1.4.1.29601.2.24.3.1.26 | ColumnfsMIOspfv3IfAuthTxed | read-only | current | This object specifies the total number of Authentication Trailer packets transmitted on the interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.27 | ColumnfsMIOspfv3IfAuthRcvd | read-only | current | This object specifies the total number of Authentication Trailer packets received on the interface. |
| 1.3.6.1.4.1.29601.2.24.3.1.28 | ColumnfsMIOspfv3IfAuthDisd | read-only | current | This object specifies the Total number of Authentication Trailer packets discarded on the interface. |
| 1.3.6.1.4.1.29601.2.24.4 | TablefsMIOspfv3RoutingTable | not-accessible | current | A table of routing information. |
| 1.3.6.1.4.1.29601.2.24.4.1 | RowfsMIOspfv3RoutingEntry | not-accessible | current | The information regarding a single route. |
| 1.3.6.1.4.1.29601.2.24.4.1.1 | ColumnfsMIOspfv3RouteDestType | not-accessible | current | The prefix type of fsMIOspfv3RouteDestType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.29601.2.24.4.1.2 | ColumnfsMIOspfv3RouteDest | not-accessible | current | The Desitnation IPv6 Address of this route. |
| 1.3.6.1.4.1.29601.2.24.4.1.3 | ColumnfsMIOspfv3RoutePfxLength | not-accessible | current | Indicates the prefix length of the destination Address. |
| 1.3.6.1.4.1.29601.2.24.4.1.4 | ColumnfsMIOspfv3RouteNextHopType | not-accessible | current | The prefix type offsMIOspfv3RouteNextHopType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.29601.2.24.4.1.5 | ColumnfsMIOspfv3RouteNextHop | not-accessible | current | Next Hop IPv6 Address for this route. For direct routes it has the value ::0. |
| 1.3.6.1.4.1.29601.2.24.4.1.6 | ColumnfsMIOspfv3RouteType | read-only | current | Type of the route |
| 1.3.6.1.4.1.29601.2.24.4.1.7 | ColumnfsMIOspfv3RouteAreaId | read-only | current | Area ID associated with the route |
| 1.3.6.1.4.1.29601.2.24.4.1.8 | ColumnfsMIOspfv3RouteCost | read-only | current | It is a Type 1 external metrics which is expressed in the same units as OSPF interface cost ie. in terms of the OSPF link state metric. If Type1 and Type2 cost… |
| 1.3.6.1.4.1.29601.2.24.4.1.9 | ColumnfsMIOspfv3RouteType2Cost | read-only | current | Type 2 external metrics are configured with the cost greater than any path internal to the AS. Use of Type 2 external metrics assumes that routing between AS i… |
| 1.3.6.1.4.1.29601.2.24.4.1.10 | ColumnfsMIOspfv3RouteInterfaceIndex | read-only | current | Interface Index associated with the route |
| 1.3.6.1.4.1.29601.2.24.5 | TablefsMIOspfv3AsExternalAggregationTable | not-accessible | current | Indicates whether for the specified address range Type-7/Type-5 LSA will be aggregated or not generated. |
| 1.3.6.1.4.1.29601.2.24.5.1 | RowfsMIOspfv3AsExternalAggregationEntry | not-accessible | current | Supports configuration of Type-5,Type-7 Address Range specifying whether for the configured range, Type-5,Type-7 LSA will be generated or not, and if generated… |
| 1.3.6.1.4.1.29601.2.24.5.1.1 | ColumnfsMIOspfv3AsExternalAggregationNetType | not-accessible | current | The prefix type of fsMIOspfv3AsExternalAggregationNetType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.29601.2.24.5.1.2 | ColumnfsMIOspfv3AsExternalAggregationNet | not-accessible | current | The IPv6 address of the Net indicated by the range. |
| 1.3.6.1.4.1.29601.2.24.5.1.3 | ColumnfsMIOspfv3AsExternalAggregationPfxLength | not-accessible | current | The prefix length that pertains to the range. |
| 1.3.6.1.4.1.29601.2.24.5.1.4 | ColumnfsMIOspfv3AsExternalAggregationAreaId | not-accessible | current | Refer to description in fsMIOspfv3AsExternalAggregationEffect. |
| 1.3.6.1.4.1.29601.2.24.5.1.5 | ColumnfsMIOspfv3AsExternalAggregationEffect | read-create | current | Indicates whether Type-5/Type-7 will be aggregated or not generated for the specified range. When set to 'allowAll' (3) and associated areaId is 0.0.0.0 aggreg… |
| 1.3.6.1.4.1.29601.2.24.5.1.6 | ColumnfsMIOspfv3AsExternalAggregationTranslation | read-create | current | This when set to enabled, P Bit is set in the generated Type-7 LSA. When set disabled P Bit is clear in the generated Type-7 LSA for the range. |
| 1.3.6.1.4.1.29601.2.24.5.1.7 | ColumnfsMIOspfv3AsExternalAggregationStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. |
| 1.3.6.1.4.1.29601.2.24.6 | TablefsMIOspfv3BRRouteTable | not-accessible | current | A table of routing information. |
| 1.3.6.1.4.1.29601.2.24.6.1 | RowfsMIOspfv3BRRouteEntry | not-accessible | current | The information regarding a single route. |
| 1.3.6.1.4.1.29601.2.24.6.1.1 | ColumnfsMIOspfv3BRRouteDest | not-accessible | current | Router Id of the destination router. ABR/ASBR entries will have Router Id as the destination network Id |
| 1.3.6.1.4.1.29601.2.24.6.1.2 | ColumnfsMIOspfv3BRRouteNextHopType | not-accessible | current | The prefix type of fsMIOspfv3BRRouteNextHopType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.29601.2.24.6.1.3 | ColumnfsMIOspfv3BRRouteNextHop | not-accessible | current | Next Hop IPv6 Address for this route. For direct routes it has the value ::0. |
| 1.3.6.1.4.1.29601.2.24.6.1.4 | ColumnfsMIOspfv3BRRouteDestType | not-accessible | current | Type of the route. The route can be ABR route entry or ASBR route entry |
| 1.3.6.1.4.1.29601.2.24.6.1.5 | ColumnfsMIOspfv3BRRouteType | read-only | current | Type of the route |
| 1.3.6.1.4.1.29601.2.24.6.1.6 | ColumnfsMIOspfv3BRRouteAreaId | read-only | current | Area ID associated with the route |
| 1.3.6.1.4.1.29601.2.24.6.1.7 | ColumnfsMIOspfv3BRRouteCost | read-only | current | The cost associated with the route |
| 1.3.6.1.4.1.29601.2.24.6.1.8 | ColumnfsMIOspfv3BRRouteInterfaceIndex | read-only | current | Interface Index associated with the route |
| 1.3.6.1.4.1.29601.2.24.7 | TablefsMIOspfv3RedistRouteCfgTable | not-accessible | current | A table describing the configuration of Metric Cost and Route Type information to be applied to the routes learnt from the RTM. |
| 1.3.6.1.4.1.29601.2.24.7.1 | RowfsMIOspfv3RedistRouteCfgEntry | not-accessible | current | Information describing the configuration of single route entry. |
| 1.3.6.1.4.1.29601.2.24.7.1.1 | ColumnfsMIOspfv3RedistRouteDestType | not-accessible | current | The prefix type of fsMIOspfv3RedistRouteDestType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.29601.2.24.7.1.2 | ColumnfsMIOspfv3RedistRouteDest | not-accessible | current | IPv6 Address of the Destination route. |
| 1.3.6.1.4.1.29601.2.24.7.1.3 | ColumnfsMIOspfv3RedistRoutePfxLength | not-accessible | current | Prefix Length of the Destination route. |
| 1.3.6.1.4.1.29601.2.24.7.1.4 | ColumnfsMIOspfv3RedistRouteMetric | read-write | current | The Metric value applied to the route before it is adv. into the OSPFv3 Domain. |
| 1.3.6.1.4.1.29601.2.24.7.1.5 | ColumnfsMIOspfv3RedistRouteMetricType | read-write | current | The Metric Type applied to the route before it is adv. into the OSPFv3 Domain |
| 1.3.6.1.4.1.29601.2.24.7.1.6 | ColumnfsMIOspfv3RedistRouteTagType | read-write | current | The Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the fsMIOspfv3… |
| 1.3.6.1.4.1.29601.2.24.7.1.7 | ColumnfsMIOspfv3RedistRouteTag | read-write | current | The Route Tag in case the user configures a Manual option for the tags. |
| 1.3.6.1.4.1.29601.2.24.7.1.8 | ColumnfsMIOspfv3RedistRouteStatus | read-create | current | The variable dispalys the status of the entry.Setting it to 'invalid' has the effect of rendering it inoperative. |
| 1.3.6.1.4.1.29601.2.24.8 | NodefsMIOspfv3RRDGroup | |||
| 1.3.6.1.4.1.29601.2.24.8.1 | NodefsMIOspfv3RRDGeneralGroup | |||
| 1.3.6.1.4.1.29601.2.24.8.1.1 | TablefsMIOspfv3RRDRouteTable | not-accessible | current | Describes RRDRoute Entry |
| 1.3.6.1.4.1.29601.2.24.8.1.1.1 | RowfsMIOspfv3RRDRouteEntry | not-accessible | current | Information describing the RRDRoute |
| 1.3.6.1.4.1.29601.2.24.8.1.1.1.1 | ColumnfsMIOspfv3RRDStatus | read-write | current | This MIB object enables/disables OSPFv3 to participate in Route Redistribution. If set to enabled, OSPFv3 will start advertising the routes learned by other pr… |
| 1.3.6.1.4.1.29601.2.24.8.1.1.1.2 | ColumnfsMIOspfv3RRDSrcProtoMask | read-write | current | The bit mask of source protocols from which routes are imported to OSPFv3. Bit 1, if set, indicates that local routes are redistributed into OSPFv3. (value = 2… |
| 1.3.6.1.4.1.29601.2.24.8.1.1.1.3 | ColumnfsMIOspfv3RRDRouteMapName | read-write | current | Name Identifies the specified route-map in the list of route-maps. |
| 1.3.6.1.4.1.29601.2.24.9 | NodefsMIOspfv3DistInOutRouteMap | |||
| 1.3.6.1.4.1.29601.2.24.9.1 | TablefsMIOspfv3DistInOutRouteMapTable | not-accessible | current | A table describing the configuration of filtering for route map. |
| 1.3.6.1.4.1.29601.2.24.9.1.1 | RowfsMIOspfv3DistInOutRouteMapEntry | not-accessible | current | Information describing the filtering configuration of single entry. |
| 1.3.6.1.4.1.29601.2.24.9.1.1.1 | ColumnfsMIOspfv3DistInOutRouteMapName | not-accessible | current | Route map name. |
| 1.3.6.1.4.1.29601.2.24.9.1.1.2 | ColumnfsMIOspfv3DistInOutRouteMapType | not-accessible | current | Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out |
| 1.3.6.1.4.1.29601.2.24.9.1.1.3 | ColumnfsMIOspfv3DistInOutRouteMapValue | read-write | current | Distance value ( this will be unused for distribute list ) |
| 1.3.6.1.4.1.29601.2.24.9.1.1.4 | ColumnfsMIOspfv3DistInOutRouteMapRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.29601.2.24.10 | NodefsMIOspfv3PreferenceGroup | |||
| 1.3.6.1.4.1.29601.2.24.10.1 | TablefsMIOspfv3PreferenceTable | not-accessible | current | Describes RRDRoute Entry |
| 1.3.6.1.4.1.29601.2.24.10.1.1 | RowfsMIOspfv3PreferenceEntry | not-accessible | current | Information describing the RRDRoute |
| 1.3.6.1.4.1.29601.2.24.10.1.1.1 | ColumnfsMIOspfv3PreferenceValue | read-write | current | Preference value for OSPFv3 routes. Use '0' to set default value |
| 1.3.6.1.4.1.29601.2.24.11 | NodefsMIOspfv3NeighborBfdGroup | |||
| 1.3.6.1.4.1.29601.2.24.11.1 | TablefsMIOspfv3NeighborBfdTable | not-accessible | current | This table Contains neighbor entry for Bfd |
| 1.3.6.1.4.1.29601.2.24.11.1.1 | RowfsMIOspfv3NeighborBfdEntry | not-accessible | current | This entry contains information describing Bfd neighbor state |
| 1.3.6.1.4.1.29601.2.24.11.1.1.1 | ColumnfsMIOspfv3NbrBfdState | read-only | current | This object specifies the Neighbor Bfd state. It is a read-only object. It is be enabled internally only when BFD is enabled for monitoring this neighbor IP pa… |
| 1.3.6.1.4.1.29601.2.24.12 | TablefsMIOspfv3IfAuthTable | not-accessible | current | This OSPF-V3 Interface Authentication Table describes the parameters required for cryptographic Authentication. |
| 1.3.6.1.4.1.29601.2.24.12.1 | RowfsMIOspfv3IfAuthEntry | not-accessible | current | This object describes one Authentication Key from the viewpoint of OSPF-V3. |
| 1.3.6.1.4.1.29601.2.24.12.1.1 | ColumnfsMIOspfv3IfAuthIfIndex | not-accessible | current | This object specifies the interface index of OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured. |
| 1.3.6.1.4.1.29601.2.24.12.1.2 | ColumnfsMIOspfv3IfAuthKeyId | not-accessible | current | This object identifies the secret key used to create the message digest appended to the OSPF-V3 packet. |
| 1.3.6.1.4.1.29601.2.24.12.1.3 | ColumnfsMIOspfv3IfAuthKey | read-write | current | This object identifies the secret key which is used to create the message digest appended to the OSPF-V3 packet. |
| 1.3.6.1.4.1.29601.2.24.12.1.4 | ColumnfsMIOspfv3IfAuthKeyStartAccept | read-write | current | This object specifies the time at which the router starts Accepting packets that have been created with the key. If the value is not set, then it will be taken… |
| 1.3.6.1.4.1.29601.2.24.12.1.5 | ColumnfsMIOspfv3IfAuthKeyStartGenerate | read-write | current | This object specifies the time at which the router starts generating packets that have been created with the key. If the value is not set, then it will be take… |
| 1.3.6.1.4.1.29601.2.24.12.1.6 | ColumnfsMIOspfv3IfAuthKeyStopGenerate | read-write | current | This object specifies the time at which the router stops using the key for packets generation. If the value is not set, then it will be taken as infinite and d… |
| 1.3.6.1.4.1.29601.2.24.12.1.7 | ColumnfsMIOspfv3IfAuthKeyStopAccept | read-write | current | This object specifies the time at which the router stops using the key for packets Verification. If the value is not set, then it will be taken as infinite and… |
| 1.3.6.1.4.1.29601.2.24.12.1.8 | ColumnfsMIOspfv3IfAuthKeyStatus | read-write | current | This object identifies the status of the key. |
| 1.3.6.1.4.1.29601.2.24.13 | TablefsMIOspfv3VirtIfAuthTable | not-accessible | current | This OSPF-V3 Interface Authentication Table describes the parameters required for cryptographic Authentication. |
| 1.3.6.1.4.1.29601.2.24.13.1 | RowfsMIOspfv3VirtIfAuthEntry | not-accessible | current | This object describes entry of one Authentication Key from the viewpoint of OSPF-V3. |
| 1.3.6.1.4.1.29601.2.24.13.1.1 | ColumnfsMIOspfv3VirtIfAuthAreaId | not-accessible | current | This object specifies the transit area that the virtual link traverses. By definition, this should not be 0.0.0.0. |
| 1.3.6.1.4.1.29601.2.24.13.1.2 | ColumnfsMIOspfv3VirtIfAuthNeighbor | not-accessible | current | This object specifies the Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.29601.2.24.13.1.3 | ColumnfsMIOspfv3VirtIfAuthKeyId | not-accessible | current | This object identifies the secret key used to create the message digest appended to the OSPF-V3 packet. |
| 1.3.6.1.4.1.29601.2.24.13.1.4 | ColumnfsMIOspfv3VirtIfAuthKey | read-write | current | This object specifies the secret key which is used to create the message digest appended to the OSPF-V3 packet. |
| 1.3.6.1.4.1.29601.2.24.13.1.5 | ColumnfsMIOspfv3VirtIfAuthKeyStartAccept | read-write | current | This object specifies the time at which the router starts generating packets that have been created with the key. If the value is not set, then it will be take… |
| 1.3.6.1.4.1.29601.2.24.13.1.6 | ColumnfsMIOspfv3VirtIfAuthKeyStartGenerate | read-write | current | This object specifies the time at which the router starts generating packets that have been created with the key. If the value is not set, then it will be take… |
| 1.3.6.1.4.1.29601.2.24.13.1.7 | ColumnfsMIOspfv3VirtIfAuthKeyStopGenerate | read-write | current | This object specifies the time at which the router stops using the key for packets generation. If the value is not set, then it will be taken as infinite and d… |
| 1.3.6.1.4.1.29601.2.24.13.1.8 | ColumnfsMIOspfv3VirtIfAuthKeyStopAccept | read-write | current | This object specifies the time at which the router stops using the key for packets Verification. If the value is not set, then it will be taken as infinite and… |
| 1.3.6.1.4.1.29601.2.24.13.1.9 | ColumnfsMIOspfv3VirtIfAuthKeyStatus | read-write | current | This object identifies the status of the key. |
| 1.3.6.1.4.1.29601.2.24.14 | TablefsMIOspfv3VirtIfCryptoAuthTable | not-accessible | current | This table holds the crypto authentication type. |
| 1.3.6.1.4.1.29601.2.24.14.1 | RowfsMIOspfv3VirtIfCryptoAuthEntry | not-accessible | current | This object describes the entry of the cryptographic authentication. |
| 1.3.6.1.4.1.29601.2.24.14.1.1 | ColumnfsMIOspfv3VirtIfCryptoAuthType | read-write | current | This object specifies the SHA crypto authentication type to be used on the interface |
| 1.3.6.1.4.1.29601.2.24.14.1.2 | ColumnfsMIOspfv3VirtIfCryptoAuthMode | read-write | current | This object specifies the crypto authentication mode to be used on the interface for setting transition |
| 1.3.6.1.4.1.29601.2.24.101 | NodefsMIOspfv3Notification | |||
| 1.3.6.1.4.1.29601.2.24.101.0 | NodefsMIOspfv3Traps | |||
| 1.3.6.1.4.1.29601.2.24.101.0.1 | NotificationfsMIOspfv3RestartStatusChange | current | An fsMIOspfv3RestartStatusChange trap signifies that there has been a change in the graceful restart state for the router. This trap should be generated when t… | |
| 1.3.6.1.4.1.29601.2.24.101.0.2 | NotificationfsMIOspfv3NbrRestartHelperStatusChange | current | An fsMIOspfv3NbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the neighbor. This trap should b… | |
| 1.3.6.1.4.1.29601.2.24.101.0.3 | NotificationfsMIOspfv3VirtNbrRestartHelperStatusChange | current | An fsMIOspfv3VirtNbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the virtual neighbor. This t… | |
| 1.3.6.1.4.1.29601.2.24.101.0.4 | NotificationfsMIOspfv3HotStandbyStateChgTrap | current | A notification is sent to the management entity whenever there is a state change in the OSPFv3 hotstandby Module | |
| 1.3.6.1.4.1.29601.2.24.101.0.5 | NotificationfsMIOspfv3HotStandbyBulkUpdAbortTrap | current | A notification is sent to the management entity whenever there is a Bulk Update Abort | |
| 1.3.6.1.4.1.29601.2.24.101.0.6 | NotificationfsMIOspfv3AuthSequenceNumWrap | current | This object specifies a notification that is sent to the management entity whenever the Authentication Trailer sequence number is wrapped | |
| 1.3.6.1.4.1.29601.2.24.101.1 | NodefsMIOspfv3TrapObject | |||
| 1.3.6.1.4.1.29601.2.24.101.1.1 | ScalarfsMIOspfv3TrapNbrIfIndex | accessible-for-notify | current | The local link ID of the link over which the neighbor can be reached. This is used for Trap |
| 1.3.6.1.4.1.29601.2.24.101.1.2 | ScalarfsMIOspfv3TrapVirtNbrRtrId | accessible-for-notify | current | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. This is used for Trap |
| 1.3.6.1.4.1.29601.2.24.101.1.3 | ScalarfsMIOspfv3TrapNbrRtrId | accessible-for-notify | current | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. This is used for Trap |
| 1.3.6.1.4.1.29601.2.24.101.1.4 | ScalarfsMIOspfv3TrapVirtNbrArea | accessible-for-notify | current | The Transit Area Identifier. This is used for Trap |
| 1.3.6.1.4.1.29601.2.24.101.1.5 | ScalarfsMIOspfv3TrapBulkUpdAbortReason | accessible-for-notify | current | The reason for the failure of particular Bulk Update abort. |