ARICENT-RFC2544-MIB
80 objects
The enterprise ID 29601 is originally assigned to Aricent Communications Pvt. Limited. Aricent Communications is a part of Aricent Group.
Imported Objects
| IEEE8021-TC-MIB | IEEE8021PriorityCodePoint |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.105 | Identityfs2544 | The enterprise ID 29601 is originally assigned to Aricent Communications Pvt. Limited. Aricent Communications is a part of Aricent Group. | ||
| 1.3.6.1.4.1.29601.2.105.1 | Nodefs2544Context | |||
| 1.3.6.1.4.1.29601.2.105.1.1 | Tablefs2544ContextTable | not-accessible | current | This table contains all the global configurations of RFC2544 per virtual context of the router. |
| 1.3.6.1.4.1.29601.2.105.1.1.1 | Rowfs2544ContextEntry | not-accessible | current | This object specifies an entry of virtual context RFC2544 Global parameters. |
| 1.3.6.1.4.1.29601.2.105.1.1.1.1 | Columnfs2544ContextId | not-accessible | current | This object specifies an unique identifier to identify the virtual context. |
| 1.3.6.1.4.1.29601.2.105.1.1.1.2 | Columnfs2544ContextName | read-only | current | This object specifies context-name for the virtual context. |
| 1.3.6.1.4.1.29601.2.105.1.1.1.3 | Columnfs2544ContextSystemControl | read-write | current | This object specifies the administrative system control status of RFC2544 module. The value 'start' (1) indicates that all resources required by RFC2544 module… |
| 1.3.6.1.4.1.29601.2.105.1.1.1.4 | Columnfs2544ContextModuleStatus | read-write | current | This object sepcifies the administrative module status of RFC2544 module. This enables or disables RFC2544 in the system. A value of 'enabled' (1) indicates th… |
| 1.3.6.1.4.1.29601.2.105.1.1.1.5 | Columnfs2544ContextTraceOption | read-write | current | This object is used to enable the trace statements in RFC2544 Module. A FOUR BYTE integer is specified for enabling the level of tracing. Each BIT in the four … |
| 1.3.6.1.4.1.29601.2.105.1.1.1.6 | Columnfs2544ContextNumOfTestRunning | read-only | current | This object specifies the number of test currently running in a virtual context. |
| 1.3.6.1.4.1.29601.2.105.1.1.1.7 | Columnfs2544ContextTrapStatus | read-write | current | This object is used to enable or disable the transmission of TRAP notification messages. By default this object is set to enable for all virtual context. |
| 1.3.6.1.4.1.29601.2.105.2 | Nodefs2544Sla | |||
| 1.3.6.1.4.1.29601.2.105.2.1 | Tablefs2544SlaTable | not-accessible | current | This table contains Service Level Agreement configurations. |
| 1.3.6.1.4.1.29601.2.105.2.1.1 | Rowfs2544SlaEntry | not-accessible | current | This entry contains information about a particular SLA Configuration. |
| 1.3.6.1.4.1.29601.2.105.2.1.1.1 | Columnfs2544SlaId | not-accessible | current | This object specifies the RFC2544 Service Level Agreement Identifier. This is a free running index used to identify a SLA. |
| 1.3.6.1.4.1.29601.2.105.2.1.1.2 | Columnfs2544SlaMEG | read-write | current | This object specifies the Maintenance Entity Group (MEG). Internally this object refers to MIB object dot1agCfmMdIndex of ECFM 802.1ag standard.The value zero(… |
| 1.3.6.1.4.1.29601.2.105.2.1.1.3 | Columnfs2544SlaME | read-write | current | This object specifies the Maintenance Entity (ME) Internally this object refers to MIB object dot1agCfmMaIndex of ECFM 802.1ag standard. The value zero(0) is u… |
| 1.3.6.1.4.1.29601.2.105.2.1.1.4 | Columnfs2544SlaMEP | read-write | current | This object specifies the Maintenance Association End Point (MEP). Internally this object refers to MIB object dot1agCfmMepIdentifier of ECFM 802.1ag standard.… |
| 1.3.6.1.4.1.29601.2.105.2.1.1.5 | Columnfs2544SlaTrafficProfileId | read-write | current | This object specifies the RFC2544 Traffic Profile Identifier that is to be associated with SLA.The value zero(0) is used for unmapping traffic profile from Sla. |
| 1.3.6.1.4.1.29601.2.105.2.1.1.6 | Columnfs2544SlaSacId | read-write | current | This object specifies the RFC2544 SAC Identifier that is to be associated with the SLA.The value zero(0) is used for unmapping Sac from Sla. |
| 1.3.6.1.4.1.29601.2.105.2.1.1.7 | Columnfs2544SlaTestStatus | read-write | current | This object specifies the RFC2544 SLA test status. It is used to start or stop the test. |
| 1.3.6.1.4.1.29601.2.105.2.1.1.8 | Columnfs2544SlaCurrentTestState | read-only | current | This object specifies the current test state of the SLA. |
| 1.3.6.1.4.1.29601.2.105.2.1.1.9 | Columnfs2544SlaTestStartTime | read-only | current | This object specifies the start time of the benchmark test in RFC2544 . |
| 1.3.6.1.4.1.29601.2.105.2.1.1.10 | Columnfs2544SlaTestEndTime | read-only | current | This object specifies the end time of the benchmark test in RFC2544 . |
| 1.3.6.1.4.1.29601.2.105.2.1.1.11 | Columnfs2544SlaRowStatus | read-write | current | This object is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can… |
| 1.3.6.1.4.1.29601.2.105.3 | Nodefs2544TrafficProfile | |||
| 1.3.6.1.4.1.29601.2.105.3.1 | Tablefs2544TrafficProfileTable | not-accessible | current | This table contains RFC2544 Test profile Table configurations. |
| 1.3.6.1.4.1.29601.2.105.3.1.1 | Rowfs2544TrafficProfileEntry | not-accessible | current | This entry contains information about a particular test profile Configuration. |
| 1.3.6.1.4.1.29601.2.105.3.1.1.1 | Columnfs2544TrafficProfileId | not-accessible | current | This object specifies the RFC2544 Traffic Profile Identifier. This is a free running index used to identify a Benchmark Test. Traffic Profile cannot be deleted… |
| 1.3.6.1.4.1.29601.2.105.3.1.1.2 | Columnfs2544TrafficProfileName | read-write | current | This object specifies the name of the RFC2544 profile. By default, the test profile name will be constructed by appending test profile ID to the string profile… |
| 1.3.6.1.4.1.29601.2.105.3.1.1.3 | Columnfs2544TrafficProfileSeqNoCheck | read-write | current | This object is used to enable or disable the validation of sequence number in received frames. Enable - Sequence number is validated for the received frames an… |
| 1.3.6.1.4.1.29601.2.105.3.1.1.4 | Columnfs2544TrafficProfileDwellTime | read-write | current | This object specifies the number of seconds to wait after each trail for the system to settle before reading the statistics from hardware. |
| 1.3.6.1.4.1.29601.2.105.3.1.1.5 | Columnfs2544TrafficProfileFrameSize | read-write | current | This object specifies the frame size used for each benchmark test. The configurable frame sizes are 64,128,256,512,1024,1280 and 1518. By default the test is d… |
| 1.3.6.1.4.1.29601.2.105.3.1.1.6 | Columnfs2544TrafficProfilePCP | read-write | current | This object specifies the PCP (Priority Code Point) that is to be inserted in the generated test frames. PCP value is inserted only if the Mep Type is Vlan bas… |
| 1.3.6.1.4.1.29601.2.105.3.1.1.7 | Columnfs2544TrafficProfileThTestStatus | read-write | current | This object enables or disables throughput test . Throughput test - Measures the maximum rate at which none of the offered frames are dropped on the device. If… |
| 1.3.6.1.4.1.29601.2.105.3.1.1.8 | Columnfs2544TrafficProfileFlTestStatus | read-write | current | This object enables or disables the Frame Loss Rate test . Frame Loss rate - Measures the performance of a network device in overloaded state. If TRUE, then th… |
| 1.3.6.1.4.1.29601.2.105.3.1.1.9 | Columnfs2544TrafficProfileLaTestStatus | read-write | current | This object enables or Disables the Latency test Latency test - Measures the time taken by a test frame to travel through a network device If TRUE, then the La… |
| 1.3.6.1.4.1.29601.2.105.3.1.1.10 | Columnfs2544TrafficProfileBbTestStatus | read-write | current | This object enables or Disbales the Back-To-Back Frame test. Back-To-Back Frame Test - Measures the buffering capacity of a device. If TRUE, then the Back-To-B… |
| 1.3.6.1.4.1.29601.2.105.3.1.1.11 | Columnfs2544TrafficProfileThTrialDuration | read-write | current | This object specifies the duration of each trails in seconds for Throughput test. |
| 1.3.6.1.4.1.29601.2.105.3.1.1.12 | Columnfs2544TrafficProfileThMaxRate | read-write | current | This object specifies the maximum rate for the Throughput test.It is specified in % of the link's bandwidth. The default value is 100% of the link speed |
| 1.3.6.1.4.1.29601.2.105.3.1.1.13 | Columnfs2544TrafficProfileThMinRate | read-write | current | This object specifies the minimum rate for the Throughput test. It is specified in % of the link's bandwidth. The default value is 80% of the link speed |
| 1.3.6.1.4.1.29601.2.105.3.1.1.14 | Columnfs2544TrafficProfileLaTrialDuration | read-write | current | This object specifies the trial duration for Latency(Delay Measurement)Test in seconds. |
| 1.3.6.1.4.1.29601.2.105.3.1.1.15 | Columnfs2544TrafficProfileLaDelayMeasureInterval | read-write | current | This object specifies the number of seconds between each delay measurement. |
| 1.3.6.1.4.1.29601.2.105.3.1.1.16 | Columnfs2544TrafficProfileFlTrialDuration | read-write | current | This object specifies the duration of the trail for Frame Loss Test in seconds. |
| 1.3.6.1.4.1.29601.2.105.3.1.1.17 | Columnfs2544TrafficProfileFlMaxRate | read-write | current | This object specifies the maximum rate for the Frame Loss test. It is specified in % of the link's bandwidth. The default value is 100% of the link speed |
| 1.3.6.1.4.1.29601.2.105.3.1.1.18 | Columnfs2544TrafficProfileFlMinRate | read-write | current | This object specifies the minimum rate for the Frame Loss test. It is specified in % of the link's bandwidth. The default value is 80% of the link speed |
| 1.3.6.1.4.1.29601.2.105.3.1.1.19 | Columnfs2544TrafficProfileFlRateStep | read-write | current | This object specifies the granularity between the minimum and maximum rates defined for Frame Loss Test. It is specified in % of the link's bandwidth . The def… |
| 1.3.6.1.4.1.29601.2.105.3.1.1.20 | Columnfs2544TrafficProfileBbTrialDuration | read-write | current | This object specifies the trail duration for Back-To-Back test in seconds. |
| 1.3.6.1.4.1.29601.2.105.3.1.1.21 | Columnfs2544TrafficProfileBbTrialCount | read-write | current | This object specifies the number of times the Back-To-Back test is to be executed. |
| 1.3.6.1.4.1.29601.2.105.3.1.1.22 | Columnfs2544TrafficProfileThRateStep | read-write | current | This object specifies the granularity between the minimum and maximum rates defined for Throughput Test. It is specified in % of the link's bandwidth . The def… |
| 1.3.6.1.4.1.29601.2.105.3.1.1.23 | Columnfs2544TrafficProfileRowStatus | read-write | current | This object is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can… |
| 1.3.6.1.4.1.29601.2.105.4 | Nodefs2544Sac | |||
| 1.3.6.1.4.1.29601.2.105.4.1 | Tablefs2544SacTable | not-accessible | current | This table contains RFC2544 Service Acceptance Criteria Table configurations. |
| 1.3.6.1.4.1.29601.2.105.4.1.1 | Rowfs2544SacEntry | not-accessible | current | This entry contains information about Service Acceptance Criteria configuration. |
| 1.3.6.1.4.1.29601.2.105.4.1.1.1 | Columnfs2544SacId | not-accessible | current | This object specifies the RFC2544 SAC Identifier. This is used to identify a particular SAC entry. Sac cannot be deleted when it is associated with a SLA. |
| 1.3.6.1.4.1.29601.2.105.4.1.1.2 | Columnfs2544SacThAllowedFrameLoss | read-write | current | This object specifies the allowable frame loss in percentage for the Throughput test . |
| 1.3.6.1.4.1.29601.2.105.4.1.1.3 | Columnfs2544SacLaAllowedFrameLoss | read-write | current | This object specifies the allowable frame loss in percentage for latency test. |
| 1.3.6.1.4.1.29601.2.105.4.1.1.4 | Columnfs2544SacFlAllowedFrameLoss | read-write | current | This object specifies the allowable frame loss in percentage for Frame Loss Rate test. |
| 1.3.6.1.4.1.29601.2.105.4.1.1.5 | Columnfs2544SacRowStatus | read-write | current | This object is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can… |
| 1.3.6.1.4.1.29601.2.105.5 | Nodefs2544Statistics | |||
| 1.3.6.1.4.1.29601.2.105.5.1 | Tablefs2544ReportStatsTable | not-accessible | current | This table contains the statistics of the benchmark test performed. |
| 1.3.6.1.4.1.29601.2.105.5.1.1 | Rowfs2544ReportStatsEntry | not-accessible | current | This entry specifies the statistics about a particular Test performed. |
| 1.3.6.1.4.1.29601.2.105.5.1.1.1 | Columnfs2544ReportStatsFrameSize | not-accessible | current | This object specifies the frame size for which the test is performed. |
| 1.3.6.1.4.1.29601.2.105.5.1.1.2 | Columnfs2544ReportStatsThVerifiedBps | read-only | current | This object specifies the verified throughput value. |
| 1.3.6.1.4.1.29601.2.105.5.1.1.3 | Columnfs2544ReportStatsThResult | read-only | current | This object specifies the throughput result. |
| 1.3.6.1.4.1.29601.2.105.5.1.1.4 | Columnfs2544ReportStatsLatencyMin | read-only | current | This object specifies the Minimum delay measured. |
| 1.3.6.1.4.1.29601.2.105.5.1.1.5 | Columnfs2544ReportStatsLatencyMax | read-only | current | This object specifies the Maximum delay measured. |
| 1.3.6.1.4.1.29601.2.105.5.1.1.6 | Columnfs2544ReportStatsLatencyMean | read-only | current | This object specifies the Average delay measured. |
| 1.3.6.1.4.1.29601.2.105.5.1.1.7 | Columnfs2544ReportStatsLatencyFailCount | read-only | current | This object specifies the number of failures against each frame. |
| 1.3.6.1.4.1.29601.2.105.5.1.1.8 | Columnfs2544ReportStatsLaIterationCalculated | read-only | current | This object specifies the number of iterations used for calculation. |
| 1.3.6.1.4.1.29601.2.105.5.1.1.9 | Columnfs2544ReportStatsLatencyResult | read-only | current | This object specifies the Latency result. |
| 1.3.6.1.4.1.29601.2.105.5.1.1.10 | Columnfs2544ReportStatsFLossRate | read-only | current | This object specifies the Frame Loss Rate observed during the test. |
| 1.3.6.1.4.1.29601.2.105.5.1.1.11 | Columnfs2544ReportStatsFLResult | read-only | current | This object specifies the Frame Loss rate result. |
| 1.3.6.1.4.1.29601.2.105.5.1.1.12 | Columnfs2544ReportStatsBacktoBackBurstSize | read-only | current | This object specifies the Back to Back frame test result. |
| 1.3.6.1.4.1.29601.2.105.6 | Nodefs2544Notification | |||
| 1.3.6.1.4.1.29601.2.105.6.0 | Nodefs2544Traps | |||
| 1.3.6.1.4.1.29601.2.105.6.0.1 | Notificationfs2544FailureTrap | current | This trap is generated when there is any failure in the Service under test. | |
| 1.3.6.1.4.1.29601.2.105.6.1 | Nodefs2544TrapObjects | |||
| 1.3.6.1.4.1.29601.2.105.6.1.2 | Scalarfs2544TrapSlaId | accessible-for-notify | current | This object refers to the SLA Id on which the RFC2544 is enabled and will be used in sending the failure Traps. |
| 1.3.6.1.4.1.29601.2.105.6.1.3 | Scalarfs2544TypeOfFailure | accessible-for-notify | current | This object provides the text indicating a particular failure condition. 'Unrecoverable/Transaction failure' will be set, when the below defects are detected i… |