ARICENT-VXLAN-MIB
120 objects
This MIB module contains managed object definitions for VXLAN standard characteristics.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus StorageType TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.89 | Identityfsvxlan | This MIB module contains managed object definitions for VXLAN standard characteristics. | ||
| 1.3.6.1.4.1.29601.2.89.1 | NodefsVxlanObjects | |||
| 1.3.6.1.4.1.29601.2.89.1.1 | NodefsVxlanSystem | |||
| 1.3.6.1.4.1.29601.2.89.1.1.1 | ScalarfsVxlanEnable | read-write | current | This object specifies whether the VXLAN is enabled globally. |
| 1.3.6.1.4.1.29601.2.89.1.1.2 | ScalarfsVxlanUdpPort | read-write | current | This object specifies VXLAN UDP Port. The UDP Port number assigned for VXLAN is 4789. The number is assigned by the IANA Service Name and Transport Protocol Po… |
| 1.3.6.1.4.1.29601.2.89.1.1.3 | ScalarfsVxlanTraceOption | read-write | current | This object is used to enable trace statements in VXLAN Module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer rep… |
| 1.3.6.1.4.1.29601.2.89.1.1.4 | ScalarfsVxlanNotificationCntl | read-write | current | This object indicates whether the VXLAN module will generate SNMP traps for events defined in this MIB. Enabled specifies that SNMP traps are generated and dis… |
| 1.3.6.1.4.1.29601.2.89.1.1.5 | ScalarfsEvpnVxlanEnable | read-write | current | This object specifies whether the EVPN is enabled globally. |
| 1.3.6.1.4.1.29601.2.89.1.2 | NodefsVxlanConfigObjects | |||
| 1.3.6.1.4.1.29601.2.89.1.2.1 | TablefsVxlanVtepTable | not-accessible | current | This table contains the VTEP (VXLAN Tunnel End Point) IP address and Information related to type of IP address for a NVE (Network Virtualization Endpoint) inte… |
| 1.3.6.1.4.1.29601.2.89.1.2.1.1 | RowfsVxlanVtepEntry | not-accessible | current | This entry in the table contains VTEP IP address and IP address type information for the NVE interface. |
| 1.3.6.1.4.1.29601.2.89.1.2.1.1.1 | ColumnfsVxlanVtepNveIfIndex | not-accessible | current | This object specifies the Interface-Index value of the NVE interface. The If-index value is mapped with the NVE interface when the interface is created in the … |
| 1.3.6.1.4.1.29601.2.89.1.2.1.1.2 | ColumnfsVxlanVtepAddressType | read-write | current | This object specifies the type of address for VXLAN VTEP. Supported address types are IPv4 and IPv6 . The objects fsVxlanMcastVtepAddressType and fsVxlanNveVte… |
| 1.3.6.1.4.1.29601.2.89.1.2.1.1.3 | ColumnfsVxlanVtepAddress | read-write | current | This object specifies the source VTEP IP address associated with NVE interface. The objects fsVxlanMcastVtepAddress and fsVxlanNveVtepAddress are updated based… |
| 1.3.6.1.4.1.29601.2.89.1.2.1.1.4 | ColumnfsVxlanVtepRowStatus | read-create | current | This object specifies the row status and used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.29601.2.89.1.2.2 | TablefsVxlanNveTable | not-accessible | current | This table contains the NVE (Network Virtualization Endpoint) database. In this database, remote VTEP information is mapped with the NVE interface. When a L2 p… |
| 1.3.6.1.4.1.29601.2.89.1.2.2.1 | RowfsVxlanNveEntry | not-accessible | current | This entry in the table contains NVE interface mapping with the remote VTEP. The source and remote VTEP information is taken from the entry using NVE If index,… |
| 1.3.6.1.4.1.29601.2.89.1.2.2.1.1 | ColumnfsVxlanNveIfIndex | not-accessible | current | This object specifies the If-Index value of the NVE interface. The If index value is mapped with the NVE interface created in the VTEP. |
| 1.3.6.1.4.1.29601.2.89.1.2.2.1.2 | ColumnfsVxlanNveVniNumber | not-accessible | current | This object specifies the VNI (VXLAN Network Identifier) associated with the NVE interface. The valid VNI values ranges from 4096 to 16777215. |
| 1.3.6.1.4.1.29601.2.89.1.2.2.1.3 | ColumnfsVxlanNveDestVmMac | not-accessible | current | This object specifies the destination VM Mac associated with NVE interface and VNI (VXLAN Network Identifier). This object is filled by user during static cond… |
| 1.3.6.1.4.1.29601.2.89.1.2.2.1.4 | ColumnfsVxlanNveVtepAddressType | read-only | current | This object specifies the type of address for VXLAN NVE VTEP. Supported address types are IPv4 and IPv6. This object is copied from fsVxlanVtepAddressType obje… |
| 1.3.6.1.4.1.29601.2.89.1.2.2.1.5 | ColumnfsVxlanNveVtepAddress | read-only | current | This object specifies source VTEP IP address associated with NVE interface and VNI (VXLAN Network Identifier). The values are filled in the outer source IP add… |
| 1.3.6.1.4.1.29601.2.89.1.2.2.1.6 | ColumnfsVxlanNveRemoteVtepAddressType | read-write | current | This object specifies the type of address for Vxlan NVE Remote VTEP Address. Supported address types are IPv4 and IPv6. |
| 1.3.6.1.4.1.29601.2.89.1.2.2.1.7 | ColumnfsVxlanNveRemoteVtepAddress | read-write | current | This object specifies the destination VTEP IP address associated with NVE interface and VNI(VXLAN Network Identifier). The values are filled in the outer sourc… |
| 1.3.6.1.4.1.29601.2.89.1.2.2.1.8 | ColumnfsVxlanNveStorageType | read-only | current | This object specifies the storage type for the conceptual row in the fsVxlanNveTable. Conceptual rows having the value 'permanent' need not allow write-access … |
| 1.3.6.1.4.1.29601.2.89.1.2.2.1.9 | ColumnfsVxlanNveRowStatus | read-create | current | This object specifies the row status and used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.29601.2.89.1.2.2.1.10 | ColumnfsVxlanSuppressArp | read-write | current | This object Enables or Disables Suppress Arp in the fsVxlanNveTable. |
| 1.3.6.1.4.1.29601.2.89.1.2.3 | TablefsVxlanMCastTable | not-accessible | current | This table contains the Multicast database. In this database, Multicast IP is mapped with the NVE interface. When a L2 packet is received on the NVE interface,… |
| 1.3.6.1.4.1.29601.2.89.1.2.3.1 | RowfsVxlanMCastEntry | not-accessible | current | This entry in the table contains NVE interface mapping with multicast IP. |
| 1.3.6.1.4.1.29601.2.89.1.2.3.1.1 | ColumnfsVxlanMCastNveIfIndex | not-accessible | current | This object specifies the If-Index value of the NVE interface. This If index value is mapped with the NVE interface created in the VTEP. |
| 1.3.6.1.4.1.29601.2.89.1.2.3.1.2 | ColumnfsVxlanMCastVniNumber | not-accessible | current | This object specifies the VNI (VXLAN Network Identifier) associated with the NVE interface. |
| 1.3.6.1.4.1.29601.2.89.1.2.3.1.3 | ColumnfsVxlanMCastGroupAddressType | read-write | current | This object specifies the type of address for VXLAN Multicast group. Supported address type are IPv4 and IPv6. |
| 1.3.6.1.4.1.29601.2.89.1.2.3.1.4 | ColumnfsVxlanMCastGroupAddress | read-write | current | The object specifies the Multicast Group IP address associated with Network Virtualization Endpoint (NVE) interface and Virtual Network Identifiers (VNI). It i… |
| 1.3.6.1.4.1.29601.2.89.1.2.3.1.5 | ColumnfsVxlanMCastVtepAddressType | read-only | current | The object specifies the type of VTEP addresses. Supported address types are IPv4 and IPv6 addresses This object is copied from fsVxlanVtepAddressType object o… |
| 1.3.6.1.4.1.29601.2.89.1.2.3.1.6 | ColumnfsVxlanMCastVtepAddress | read-only | current | This object specifies the source VTEP IP address associated with NVE (Network Virtualization Endpoint) interface and VNI (Virtual Network Identifiers). The val… |
| 1.3.6.1.4.1.29601.2.89.1.2.3.1.7 | ColumnfsVxlanMCastRowStatus | read-create | current | This object specifies the row status and is used to create, modify, and/or delete a row in the table. |
| 1.3.6.1.4.1.29601.2.89.1.2.4 | TablefsVxlanVniVlanMapTable | not-accessible | current | This table contains the VNI id, VLAN mapping and VXLAN packet statistics for a particular VXLAN segment (VNI id). When the L2 packet is received from VLAN modu… |
| 1.3.6.1.4.1.29601.2.89.1.2.4.1 | RowfsVxlanVniVlanMapEntry | not-accessible | current | This entry in the table contains the VNI (Virtual Network Identifiers) and VLAN mapping. This entry is created once the VNI number is mapped with the particula… |
| 1.3.6.1.4.1.29601.2.89.1.2.4.1.1 | ColumnfsVxlanVniVlanMapVlanId | not-accessible | current | This object specifies the VLAN id associated with the VNI. This association is used for the VXLAN packet decapsulation. |
| 1.3.6.1.4.1.29601.2.89.1.2.4.1.2 | ColumnfsVxlanVniVlanMapVniNumber | read-write | current | This object specifies the VNI (Virtual Network Identifiers) associated with the VLAN. This association is used for the VXLAN packet encapsulation. |
| 1.3.6.1.4.1.29601.2.89.1.2.4.1.3 | ColumnfsVxlanVniVlanMapPktSent | read-write | current | This object specifies the number of VXLAN packets sent in the VXLAN segment (VNI). When this object is read-only, it displays the statistics of this object. Th… |
| 1.3.6.1.4.1.29601.2.89.1.2.4.1.4 | ColumnfsVxlanVniVlanMapPktRcvd | read-write | current | This object specifies the number of VXLAN packets received in the VXLAN segment (VNI).When this object is read-only, it displays the statistics of this object.… |
| 1.3.6.1.4.1.29601.2.89.1.2.4.1.5 | ColumnfsVxlanVniVlanMapPktDrpd | read-write | current | This object specifies the number of VXLAN packets dropped in the VXLAN segment (VNI).When this object is read-only, it displays the statistics of this object. … |
| 1.3.6.1.4.1.29601.2.89.1.2.4.1.6 | ColumnfsVxlanVniVlanMapRowStatus | read-create | current | This object specifies the row status and is used to create, modify, and/or delete a row in the table. |
| 1.3.6.1.4.1.29601.2.89.1.2.4.1.7 | ColumnfsVxlanVniVlanDfElection | read-only | current | This object indicates that DF Election is enabled in Vlan Vni Table when the value is set to TRUE(1), and indicates that DF Election is disabled in Vlan Vni Ta… |
| 1.3.6.1.4.1.29601.2.89.1.2.5 | TablefsVxlanInReplicaTable | not-accessible | current | This table contains the Ingress Replica database. In this database, ingress replica information is mapped with the NVE interface. When a L2 packet is received … |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1 | RowfsVxlanInReplicaEntry | not-accessible | current | This entry in the table contains NVE interface mapping with the Ingress Replica VTEP. The source and ingress replica information is taken from the entry using … |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.1 | ColumnfsVxlanInReplicaNveIfIndex | not-accessible | current | This object specifies If-Index value of the NVE interface. The If index value is mapped with the NVE interface created in the VTEP. |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.2 | ColumnfsVxlanInReplicaVniNumber | not-accessible | current | This object specifies the VNI (VXLAN Network Identifier) associated with the NVE interface. The valid VNI values ranges from 4096 to 16777215. |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.3 | ColumnfsVxlanInReplicaVtepAddressType | read-only | current | This object specifies the type of address for VXLAN NVE VTEP. Supported address types are IPv4 and IPv6. This object is copied from fsVxlanVtepAddressType obje… |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.4 | ColumnfsVxlanInReplicaVtepAddress | read-only | current | This object specifies source VTEP IP address associated with NVE interface and VNI (VXLAN Network Identifier). The values are filled in the outer source IP add… |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.5 | ColumnfsVxlanInReplicaRemoteVtepAddressType | read-write | current | This object specifies the type of address for Vxlan NVE Ingress Replica VTEP Address. Supported address types are IPv4 and IPv6. |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.6 | ColumnfsVxlanInReplicaRemoteVtepAddress1 | read-write | current | This object specifies the destination Ingress Replica-1 VTEP IP address associated with NVE interface and VNI(VXLAN Network Identifier). The values are filled … |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.7 | ColumnfsVxlanInReplicaRemoteVtepAddress2 | read-write | current | This object specifies the destination Ingress Replica-2 VTEP IP address associated with NVE interface and VNI(VXLAN Network Identifier). The values are filled … |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.8 | ColumnfsVxlanInReplicaRemoteVtepAddress3 | read-write | current | This object specifies the destination Ingress Replica-3 VTEP IP address associated with NVE interface and VNI(VXLAN Network Identifier). The values are filled … |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.9 | ColumnfsVxlanInReplicaRemoteVtepAddress4 | read-write | current | This object specifies the destination Ingress Replica-4 VTEP IP address associated with NVE interface and VNI(VXLAN Network Identifier). The values are filled … |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.10 | ColumnfsVxlanInReplicaRemoteVtepAddress5 | read-write | current | This object specifies the destination Ingress Replica-5 VTEP IP address associated with NVE interface and VNI(VXLAN Network Identifier). The values are filled … |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.11 | ColumnfsVxlanInReplicaRemoteVtepAddress6 | read-write | current | This object specifies the destination Ingress Replica-6 VTEP IP address associated with NVE interface and VNI(VXLAN Network Identifier). The values are filled … |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.12 | ColumnfsVxlanInReplicaRemoteVtepAddress7 | read-write | current | This object specifies the destination Ingress Replica-7 VTEP IP address associated with NVE interface and VNI(VXLAN Network Identifier). The values are filled … |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.13 | ColumnfsVxlanInReplicaRemoteVtepAddress8 | read-write | current | This object specifies the destination Ingress Replica-8 VTEP IP address associated with NVE interface and VNI(VXLAN Network Identifier). The values are filled … |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.14 | ColumnfsVxlanInReplicaRemoteVtepAddress9 | read-write | current | This object specifies the destination Ingress Replica-9 VTEP IP address associated with NVE interface and VNI(VXLAN Network Identifier). The values are filled … |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.15 | ColumnfsVxlanInReplicaRemoteVtepAddress10 | read-write | current | This object specifies the destination Ingress Replica-10 VTEP IP address associated with NVE interface and VNI(VXLAN Network Identifier). The values are filled… |
| 1.3.6.1.4.1.29601.2.89.1.2.5.1.16 | ColumnfsVxlanInReplicaRowStatus | read-create | current | This object specifies the row status and used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.29601.2.89.1.2.6 | TablefsEvpnVxlanEviVniMapTable | not-accessible | current | This table contains the EVI number mapped with VNI, when encapsulation mode is VXLAN. |
| 1.3.6.1.4.1.29601.2.89.1.2.6.1 | RowfsEvpnVxlanEviVniMapEntry | not-accessible | current | This object specifies an entry in the table contains EVI and VNI Map Index, Route Distinguisher, ESI and statistics information for the particular EVPN instance |
| 1.3.6.1.4.1.29601.2.89.1.2.6.1.1 | ColumnfsEvpnVxlanEviVniMapEviIndex | not-accessible | current | This object specifies the EVI Index. This index is referred to get the particular EVPN instance |
| 1.3.6.1.4.1.29601.2.89.1.2.6.1.2 | ColumnfsEvpnVxlanEviVniMapVniNumber | not-accessible | current | This object specifies the VNI Id which is mapped to EVI. This is one of the indices in the table. Other mib objects such as fsEvpnVxlanEviVniMapBgpRD, fsEvpnVx… |
| 1.3.6.1.4.1.29601.2.89.1.2.6.1.3 | ColumnfsEvpnVxlanEviVniMapBgpRD | read-write | current | This object specifies the route distinguisher for the EVPN. This object take Type 0, Type 1 and Type 2 RD as per RFC 4364. In case of auto-discover, Type 0 RD … |
| 1.3.6.1.4.1.29601.2.89.1.2.6.1.4 | ColumnfsEvpnVxlanEviVniESI | read-write | current | This object sepcifies Ethernet Segment Identifier attached to EVPN instance and this identifier used in case of multi-homing. ESI can either auto-generated by … |
| 1.3.6.1.4.1.29601.2.89.1.2.6.1.5 | ColumnfsEvpnVxlanEviVniLoadBalance | read-write | current | This object selects Active-Active or Active-Stanby mode in EVPN in case of multi-homing. when enabled, EVPN works in Active-Active mode. when disabled, EVPN wo… |
| 1.3.6.1.4.1.29601.2.89.1.2.6.1.6 | ColumnfsEvpnVxlanEviVniMapSentPkts | read-write | current | This object specifies the number of VXLAN packets sent in the EVPN instance (EVI) When this object is read-only, it displays the statistics of this object. Thi… |
| 1.3.6.1.4.1.29601.2.89.1.2.6.1.7 | ColumnfsEvpnVxlanEviVniMapRcvdPkts | read-write | current | This object specifies the number of VXLAN packets received in the EVPN instance (EVI) When this object is read-only, it displays the statistics of this object.… |
| 1.3.6.1.4.1.29601.2.89.1.2.6.1.8 | ColumnfsEvpnVxlanEviVniMapDroppedPkts | read-write | current | This object specifies the number of VXLAN packets dropped in the EVPN instance (EVI) When this object is read-only, it displays the statistics of this object. … |
| 1.3.6.1.4.1.29601.2.89.1.2.6.1.9 | ColumnfsEvpnVxlanEviVniMapRowStatus | read-create | current | This object specifies the row status and is used to create, modify, and/or delete a row in the table. |
| 1.3.6.1.4.1.29601.2.89.1.2.6.1.10 | ColumnfsEvpnVxlanEviVniMapBgpRDAuto | read-write | current | This object indicates that auto-discover is enabled in route distinguisher for the EVPN when it is set as TRUE(1), and indicates that auto-discover is disabled… |
| 1.3.6.1.4.1.29601.2.89.1.2.7 | TablefsEvpnVxlanBgpRTTable | not-accessible | current | This table specifies the list of Route Targets imported or exported by BGP during Route advertisement of EVPN - L2VNI. |
| 1.3.6.1.4.1.29601.2.89.1.2.7.1 | RowfsEvpnVxlanBgpRTEntry | not-accessible | current | This object specifies an entry in the table, where this entry specifies the value of the Route Target being used by BGP. Depending on the value of fsEvpnVxlanB… |
| 1.3.6.1.4.1.29601.2.89.1.2.7.1.1 | ColumnfsEvpnVxlanBgpRTIndex | not-accessible | current | This object specifies an index along with fsEvpnVxlanEviVniMapEviIndex, fsEvpnVxlanEviVniMapEviIndexidentifies and fsEvpnVxlanBgpRTType identifies one entry in… |
| 1.3.6.1.4.1.29601.2.89.1.2.7.1.2 | ColumnfsEvpnVxlanBgpRTType | not-accessible | current | This object is one of the indices in fsEvpnVxlanBgpRTTable. Used to define the type of a route target usage. Route targets can be specified to be imported, exp… |
| 1.3.6.1.4.1.29601.2.89.1.2.7.1.3 | ColumnfsEvpnVxlanBgpRT | read-create | current | This object specifies route target associated with the EVPN service. This shall take Type 0, Type 1 and Type 2 RT as per RFC 4364. In case of auto-discover, Ty… |
| 1.3.6.1.4.1.29601.2.89.1.2.7.1.4 | ColumnfsEvpnVxlanBgpRTRowStatus | read-create | current | This object specifies a variable that is used to create, modify, and/or delete a row in this table. All other objects in this row must be set to valid values b… |
| 1.3.6.1.4.1.29601.2.89.1.2.7.1.5 | ColumnfsEvpnVxlanBgpRTAuto | read-write | current | This object indicates that auto-discover is enabled in route target for the EVPN when it is set as TRUE(1), and indicates that auto-discover is disabled when i… |
| 1.3.6.1.4.1.29601.2.89.1.2.8 | TablefsEvpnVxlanVrfTable | not-accessible | current | This table specifies per-interface VXLAN EVPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated wi… |
| 1.3.6.1.4.1.29601.2.89.1.2.8.1 | RowfsEvpnVxlanVrfEntry | not-accessible | current | This object specifies an entry in the table contains VRF capable of supporting VXLAN EVPN routing. |
| 1.3.6.1.4.1.29601.2.89.1.2.8.1.1 | ColumnfsEvpnVxlanVrfName | not-accessible | current | This object specifies the human-readable name of the EVPN VRF. It is strongly recommended that all sites supporting VRFs that are part of the same EVPN use the… |
| 1.3.6.1.4.1.29601.2.89.1.2.8.1.2 | ColumnfsEvpnVxlanVrfRD | read-write | current | This object specifies the route distinguisher for the EVPN VRF. This shall take Type 0, Type 1 and Type 2 RD as per RFC 4364. In case of auto-discover, Type 0 … |
| 1.3.6.1.4.1.29601.2.89.1.2.8.1.3 | ColumnfsEvpnVxlanVrfRowStatus | read-create | current | This object specifies a variable that is used to create, modify, and/or delete a row in this table. All other objects in this row must be set to valid values b… |
| 1.3.6.1.4.1.29601.2.89.1.2.9 | TablefsEvpnVxlanVrfRTTable | not-accessible | current | This table specifies the list of Route Targets imported or exported by BGP during Route advertisement of EVPN per VRF. |
| 1.3.6.1.4.1.29601.2.89.1.2.9.1 | RowfsEvpnVxlanVrfRTEntry | not-accessible | current | An entry in this table specifies the value of the Route Target being used by BGP. Depending on the value of fsEvpnVxlanVrfRTType an RT might be exported or imp… |
| 1.3.6.1.4.1.29601.2.89.1.2.9.1.1 | ColumnfsEvpnVxlanVrfRTIndex | not-accessible | current | This object specifies an index along with fsEvpnVxlanVrfName, fsEvpnVxlanVrfRTIndex and fsEvpnVxlanVrfRTType identifies one entry in the fsEvpnVxlanVrfRTTable.… |
| 1.3.6.1.4.1.29601.2.89.1.2.9.1.2 | ColumnfsEvpnVxlanVrfRTType | not-accessible | current | This object is one of the indices in fsEvpnVxlanVrfRTTable. Used to define the type of a route target usage. Route targets can be specified to be imported, exp… |
| 1.3.6.1.4.1.29601.2.89.1.2.9.1.3 | ColumnfsEvpnVxlanVrfRT | read-write | current | This object specifies the route target associated with the EVPN VRF. This object take Type 0, Type 1 and Type 2 RT as per RFC 4364. In case of auto-discover, T… |
| 1.3.6.1.4.1.29601.2.89.1.2.9.1.4 | ColumnfsEvpnVxlanVrfRTRowStatus | read-create | current | This object specifies a variable that is used to create, modify, and/or delete a row in this table. All other objects in this row must be set to valid values b… |
| 1.3.6.1.4.1.29601.2.89.1.2.10 | TablefsEvpnVxlanMultihomedPeerTable | not-accessible | current | This table specifies the list of Multihomed peer ip address imported or exported by BGP during Route advertisement in EVPN |
| 1.3.6.1.4.1.29601.2.89.1.2.10.1 | RowfsEvpnVxlanMultihomedPeerEntry | not-accessible | current | This object specifies an entry in the table, where the entry specifies IP addresses of multi-homed peers attached to the Ethernet Segment per EVPN instance. |
| 1.3.6.1.4.1.29601.2.89.1.2.10.1.1 | ColumnfsEvpnVxlanPeerIpAddressType | not-accessible | current | This object specifies one of the indices in fsEvpnVxlanMultihomedPeerTable. Supported address types are IPv4 and IPv6. |
| 1.3.6.1.4.1.29601.2.89.1.2.10.1.2 | ColumnfsEvpnVxlanPeerIpAddress | not-accessible | current | This object is one of the indices in fsEvpnVxlanMultihomedPeerTable. Used to list the IP Address in multihome network. Ip addresses should be stored in ascendi… |
| 1.3.6.1.4.1.29601.2.89.1.2.10.1.3 | ColumnfsEvpnVxlanMHEviVniESI | not-accessible | current | This object specifies one of the indices in fsEvpnVxlanMultihomedPeerTable. It specifies Ethernet Segment Identifier attached to EVPN instance and is used in c… |
| 1.3.6.1.4.1.29601.2.89.1.2.10.1.4 | ColumnfsEvpnVxlanOrdinalNum | read-write | current | This object specifies the Index of Ordinals in the EVPN The ordinals are used to determine which PE node will be the DF for a given EVI on the Ethernet Segment… |
| 1.3.6.1.4.1.29601.2.89.1.2.10.1.5 | ColumnfsEvpnVxlanMultihomedPeerRowStatus | read-create | current | This object is a variable that is used to create, modify, and/or delete a row in this table. All other objects in this row must be set to valid values before t… |
| 1.3.6.1.4.1.29601.2.89.1.2.11 | TablefsVxlanEcmpNveTable | not-accessible | current | This table contains the NVE (Network Virtualization Endpoint) database. In this database, remote VTEP information is mapped with the NVE interface. When a L2 p… |
| 1.3.6.1.4.1.29601.2.89.1.2.11.1 | RowfsVxlanEcmpNveEntry | not-accessible | current | This entry in the table contains NVE interface mapping with the remote VTEP. The source and remote VTEP information is taken from the entry using NVE If index,… |
| 1.3.6.1.4.1.29601.2.89.1.2.11.1.1 | ColumnfsVxlanEcmpNveIfIndex | not-accessible | current | This object specifies the If-Index value of the NVE interface. The If index value is mapped with the NVE interface created in the VTEP. |
| 1.3.6.1.4.1.29601.2.89.1.2.11.1.2 | ColumnfsVxlanEcmpNveVniNumber | not-accessible | current | This object specifies the VNI (VXLAN Network Identifier) associated with the NVE interface. The valid VNI values ranges from 4096 to 16777215. |
| 1.3.6.1.4.1.29601.2.89.1.2.11.1.3 | ColumnfsVxlanEcmpNveDestVmMac | not-accessible | current | This object specifies the destination VM Mac associated with NVE interface and VNI (VXLAN Network Identifier). This object is filled by user during static cond… |
| 1.3.6.1.4.1.29601.2.89.1.2.11.1.4 | ColumnfsVxlanEcmpNveVtepAddressType | read-only | current | This object specifies the type of address for VXLAN NVE VTEP. Supported address types are IPv4 and IPv6. This object is copied from fsVxlanEcmpVtepAddressType … |
| 1.3.6.1.4.1.29601.2.89.1.2.11.1.5 | ColumnfsVxlanEcmpNveVtepAddress | read-only | current | This object specifies source VTEP IP address associated with NVE interface and VNI (VXLAN Network Identifier). The values are filled in the outer source IP add… |
| 1.3.6.1.4.1.29601.2.89.1.2.11.1.6 | ColumnfsVxlanEcmpNveRemoteVtepAddressType | not-accessible | current | This object specifies the type of address for Vxlan NVE Remote VTEP Address. Supported address types are IPv4 and IPv6. |
| 1.3.6.1.4.1.29601.2.89.1.2.11.1.7 | ColumnfsVxlanEcmpNveRemoteVtepAddress | not-accessible | current | This object specifies the destination VTEP IP address associated with NVE interface and VNI(VXLAN Network Identifier). The values are filled in the outer sourc… |
| 1.3.6.1.4.1.29601.2.89.1.2.11.1.8 | ColumnfsVxlanEcmpNveStorageType | read-only | current | This object specifies the storage type for the conceptual row in the fsVxlanEcmpNveTable. Conceptual rows having the value 'permanent' need not allow write-acc… |
| 1.3.6.1.4.1.29601.2.89.1.2.11.1.9 | ColumnfsVxlanEcmpSuppressArp | read-only | current | This object Enables or Disables Suppress Arp in the fsVxlanEcmpNveTable. |
| 1.3.6.1.4.1.29601.2.89.1.2.11.1.10 | ColumnfsVxlanEcmpMHEviVniESI | read-only | current | This object specifies one of the indices in fsVxlanEcmpNveTable. It specifies Ethernet Segment Identifier attached to EVPN instance and this identifier used in… |
| 1.3.6.1.4.1.29601.2.89.1.2.11.1.11 | ColumnfsVxlanEcmpActive | read-only | current | This object indicates whether ECMP mac entry is Active or Standby. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EviId | Integer32 (1..4096) | current | This object specifies an Identifier of 2 bytes which is used to arrive RD in EVPN BGP routes |
| EvpnVxlanBgpRD | OCTET STRING(SIZE (0..256)) | current | This object specifies the syntax for a route distinguisher. |
| EvpnVxlanBgpRTType | INTEGER { import(1), export(2), both(3) } | current | This object defines the type of a route target usage. Route targets can be specified to be imported, exported, or both. |
| EvpnVxlanESI | OCTET STRING(SIZE (0..10)) | current | This object specifies Ethernet Segment Identifier attached to L2 VNI |
| EvpnVxlanVrfName | OCTET STRING (SIZE (0..16)) | current | This object specifies an identifier that is assigned to L3 VNI and is used to uniquely identify the identifier. This identifier is assigned by the system operator or NMS and SHOULD be unique throughout the EVPN domain. … |
| VlanId | Integer32 (1..4094) | current | This is a 12-bit VLAN ID used in the VLAN Tag header. |
| VniId | Unsigned32 (4096..16777215) | current | VXLAN Network Identifier (VNI)is a 24 bit segment identifier used in the VXLAN header. VXLAN is a Layer 2 overlay scheme over a Layer 3 network. Each overlay is termed a VXLAN segment. Only VMs within the same VXLAN seg… |