ARICENT-Y1564-CFG-MIB
123 objects
The enterprise ID 29601 is originally assigned to Aricent Communications Pvt. Limited. Aricent Communications is a part of Aricent Group.
Imported Objects
| IEEE8021-TC-MIB | IEEE8021PriorityCodePoint |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.88 | IdentityfsY1564 | The enterprise ID 29601 is originally assigned to Aricent Communications Pvt. Limited. Aricent Communications is a part of Aricent Group. | ||
| 1.3.6.1.4.1.29601.2.88.1 | NodefsY1564Context | |||
| 1.3.6.1.4.1.29601.2.88.1.1 | TablefsY1564ContextTable | not-accessible | current | Table of Y1564 module parameters per Y1564 Virtual Context. |
| 1.3.6.1.4.1.29601.2.88.1.1.1 | RowfsY1564ContextEntry | not-accessible | current | This entry contains virtual context specific Y1564 module parameters. |
| 1.3.6.1.4.1.29601.2.88.1.1.1.1 | ColumnfsY1564ContextId | not-accessible | current | Identifies the virtual context in the system |
| 1.3.6.1.4.1.29601.2.88.1.1.1.2 | ColumnfsY1564ContextName | read-only | current | This object gives the context-name for this virtual context. |
| 1.3.6.1.4.1.29601.2.88.1.1.1.3 | ColumnfsY1564ContextSystemControl | read-write | current | The administrative system control status of Y1564 module. The value 'start' (1) indicates that all resources required by Y1564 should be allocated and Y1564 sh… |
| 1.3.6.1.4.1.29601.2.88.1.1.1.4 | ColumnfsY1564ContextModuleStatus | read-write | current | The administrative module status of Y1564 module. The value 'enable (1)' indicates that Y1564 should be enabled in the virtual context The value 'disable (2)' … |
| 1.3.6.1.4.1.29601.2.88.1.1.1.5 | ColumnfsY1564ContextTraceOption | read-write | current | This object is used to enable the trace statements in Y1564 Module. A FOUR BYTE integer is specified for enabling the level of tracing. Each BIT in the four by… |
| 1.3.6.1.4.1.29601.2.88.1.1.1.6 | ColumnfsY1564ContextTrapStatus | read-write | current | This object is used to enable or disable the transmission of TRAP notification messages. By default this object is set to enable(1) for all virtual contexts. |
| 1.3.6.1.4.1.29601.2.88.1.1.1.7 | ColumnfsY1564ContextNumOfConfTestRunning | read-only | current | This object indicates the number of configuration tests are currently running in the virtual context. |
| 1.3.6.1.4.1.29601.2.88.1.1.1.8 | ColumnfsY1564ContextNumOfPerfTestRunning | read-only | current | This object indicates the number of performance test are currently running in the virtual context. |
| 1.3.6.1.4.1.29601.2.88.2 | NodefsY1564Sla | |||
| 1.3.6.1.4.1.29601.2.88.2.1 | TablefsY1564SlaTable | not-accessible | current | This table contains Y1564 Service Level Agreement configurations. SLA is an Agreement between service provider and subscribers |
| 1.3.6.1.4.1.29601.2.88.2.1.1 | RowfsY1564SlaEntry | not-accessible | current | This entry contains information about a particular Y1564 SLA Configuration. |
| 1.3.6.1.4.1.29601.2.88.2.1.1.1 | ColumnfsY1564SlaId | not-accessible | current | This object specifies the Y1564 Service Level Agreement Identifier (An Agreement between service provider and subscribers). This is a free running index used t… |
| 1.3.6.1.4.1.29601.2.88.2.1.1.2 | ColumnfsY1564SlaEvcIndex | read-write | current | This object specifies the service provider VLAN (S-VLAN) on which service is created. The EVC is configured using MEF MIB. Internally this object refers to fsE… |
| 1.3.6.1.4.1.29601.2.88.2.1.1.3 | ColumnfsY1564SlaMEG | read-write | current | This object specifies the Maintenance Entity Group (MEG) of the fsY1564SlaEntry. Internally this object refers to MIB object dot1agCfmMdIndex of ECFM 802.1ag s… |
| 1.3.6.1.4.1.29601.2.88.2.1.1.4 | ColumnfsY1564SlaME | read-write | current | This object specifies the Maintenance Entity (ME) of the fsY1564SlaEntry.Internally this object refers to MIB object dot1agCfmMaIndex of ECFM 802.1ag standard.… |
| 1.3.6.1.4.1.29601.2.88.2.1.1.5 | ColumnfsY1564SlaMEP | read-write | current | This object specifies the Maintenance Association End Point (MEP) of the fsY1564SlaEntry. Internally this object refers to MIB object dot1agCfmMepIdentifier of… |
| 1.3.6.1.4.1.29601.2.88.2.1.1.6 | ColumnfsY1564SlaSacId | read-write | current | This object specifies the Service Acceptance Criteria to which the SLA is currently mapped.Multiple SACs can be created and each can be associated to a given S… |
| 1.3.6.1.4.1.29601.2.88.2.1.1.7 | ColumnfsY1564SlaTrafProfileId | read-write | current | This object specifies the Traffic Profile to which the SLA is currently mapped. Multiple packet profiles can be created and each can be associated to a given S… |
| 1.3.6.1.4.1.29601.2.88.2.1.1.8 | ColumnfsY1564SlaStepLoadRate | read-write | current | This object specifies the step load rate of the step load CIR (Committed Information Rate) configuration test. If no value is provided, 25% of CIR is sent firs… |
| 1.3.6.1.4.1.29601.2.88.2.1.1.9 | ColumnfsY1564SlaConfTestDuration | read-write | current | This object specifies the duration of each individual test in seconds. If Configuration test is started with CIR, EIR, Traffic Policing and fsY1564SlaConfTestD… |
| 1.3.6.1.4.1.29601.2.88.2.1.1.10 | ColumnfsY1564SlaTestStatus | read-write | current | This object specifies the Y1564 Service Configuration test initiation status. An enumerated value set to 'start' initiates service configuration test based on … |
| 1.3.6.1.4.1.29601.2.88.2.1.1.11 | ColumnfsY1564SlaServiceConfId | read-write | current | This object specifies the Service Configuration to which the SLA is currently mapped. Multiple services can be created and each can be associated to a given SL… |
| 1.3.6.1.4.1.29601.2.88.2.1.1.12 | ColumnfsY1564SlaColorMode | read-only | current | This object specifies whether the color-aware or color blind property is employed by the bandwidth profile. The default value for this object is ColorBlind. |
| 1.3.6.1.4.1.29601.2.88.2.1.1.13 | ColumnfsY1564SlaCoupFlag | read-only | current | This object specifies the modes of operation of the rate enforcement algorithm. The choice of the value for CF has the effect of controlling the volume of the … |
| 1.3.6.1.4.1.29601.2.88.2.1.1.14 | ColumnfsY1564SlaCIR | read-only | current | The committed information rate Must be >= 0. CIR must be less than or equal to EIR,if EIR > 0. |
| 1.3.6.1.4.1.29601.2.88.2.1.1.15 | ColumnfsY1564SlaCBS | read-only | current | The committed burst size Must be > 0 if CIR > 0. |
| 1.3.6.1.4.1.29601.2.88.2.1.1.16 | ColumnfsY1564SlaEIR | read-only | current | The excess information rate Must be >= 0. EIR must be greater than or equal to CIR,if EIR > 0. |
| 1.3.6.1.4.1.29601.2.88.2.1.1.17 | ColumnfsY1564SlaEBS | read-only | current | The excess burst size Must be > 0 if EIR > 0. |
| 1.3.6.1.4.1.29601.2.88.2.1.1.18 | ColumnfsY1564SlaTrafPolicing | read-write | current | This object specifies the Traffic policing status. If the Trafific policing status is set as off then Traffic polincing test is not triggered for the specified… |
| 1.3.6.1.4.1.29601.2.88.2.1.1.19 | ColumnfsY1564SlaTestSelector | read-write | current | This object specifies the Test Input to be tested for the Test. A FOUR BYTE integer is used to specify the Test Inputs. Each BIT in the four byte integer repre… |
| 1.3.6.1.4.1.29601.2.88.2.1.1.20 | ColumnfsY1564SlaCurrentTestMode | read-only | current | This object specifies the currently running test in service configuration test. The mode will be one of the following 0 - Indicates the no test is in progress … |
| 1.3.6.1.4.1.29601.2.88.2.1.1.21 | ColumnfsY1564SlaCurrentTestState | read-only | current | This object specifies the current test state of the SLA. |
| 1.3.6.1.4.1.29601.2.88.2.1.1.22 | ColumnfsY1564SlaRowStatus | read-write | current | This object specifies the row status and is used to create or deletea new entry by setting this object to the appropriate value as mentioned in SMI-v2. |
| 1.3.6.1.4.1.29601.2.88.3 | NodefsY1564TrafProf | |||
| 1.3.6.1.4.1.29601.2.88.3.1 | TablefsY1564TrafProfTable | not-accessible | current | This table contains Traffic Profile configurations. |
| 1.3.6.1.4.1.29601.2.88.3.1.1 | RowfsY1564TrafProfEntry | not-accessible | current | This entry contains information about a particular Traffic Profile configuration. |
| 1.3.6.1.4.1.29601.2.88.3.1.1.1 | ColumnfsY1564TrafProfId | not-accessible | current | This object specifies the Y1564 Traffic Profile Identifier. This is a free running index. |
| 1.3.6.1.4.1.29601.2.88.3.1.1.2 | ColumnfsY1564TrafProfDir | read-write | current | This object specifies the direction of Y1564 Traffic Profile Generation. When this object is set as external, the traffic is generated at the wire-side of netw… |
| 1.3.6.1.4.1.29601.2.88.3.1.1.3 | ColumnfsY1564TrafProfPktSize | read-write | current | This object specifies the Y1564 Traffic Profile Packet Size in bytes. Allowable frame sizes are 64,128,256,512,1024,1280 and 1518 |
| 1.3.6.1.4.1.29601.2.88.3.1.1.4 | ColumnfsY1564TrafProfPayload | read-write | current | This object specifies the Y1564 Payload in the packet profile. |
| 1.3.6.1.4.1.29601.2.88.3.1.1.5 | ColumnfsY1564TrafProfOptEmixPktSize | read-write | current | This object specifies the optional variable-size pattern (EMIX)in bytes for Y1564 Traffic Profile. Frame Sizes and corresponding size desiginations are a - 64,… |
| 1.3.6.1.4.1.29601.2.88.3.1.1.6 | ColumnfsY1564TrafProfPCP | read-write | current | This object specifies the priority that is to be inserted in the generated test frames. PCP value is inserted only if the Mep Type is Vlan based Mep. |
| 1.3.6.1.4.1.29601.2.88.3.1.1.7 | ColumnfsY1564TrafProfRowStatus | read-write | current | This object specifies the row status and is used to create or delete a new entry by setting this object to the appropriate value as mentioned in SMI-v2. |
| 1.3.6.1.4.1.29601.2.88.4 | NodefsY1564Sac | |||
| 1.3.6.1.4.1.29601.2.88.4.1 | TablefsY1564SacTable | not-accessible | current | This table contains Service Acceptance Criteria Profile configuration. Service Acceptance Criteria (SAC) is a set of criteria used to ensure that a service mee… |
| 1.3.6.1.4.1.29601.2.88.4.1.1 | RowfsY1564SacEntry | not-accessible | current | This entry contains information about a particular SAC Profile configuration. |
| 1.3.6.1.4.1.29601.2.88.4.1.1.1 | ColumnfsY1564SacId | not-accessible | current | This object specifies the Y1564 SAC Identifier used to identify the particular SAC entry. |
| 1.3.6.1.4.1.29601.2.88.4.1.1.2 | ColumnfsY1564SacInfoRate | read-write | current | This object specifies the Y1564 Information Rate configured as part of this SAC. This is the minimum Information Rate that each services are expected to be met… |
| 1.3.6.1.4.1.29601.2.88.4.1.1.3 | ColumnfsY1564SacFrLossRatio | read-write | current | This object specifies the Y1564 Frame Loss Ratio (FLR) configured as part of this SAC. This is the minimum frame loss ratio that each services are expected to … |
| 1.3.6.1.4.1.29601.2.88.4.1.1.4 | ColumnfsY1564SacFrTransDelay | read-write | current | This object specifies the Y1564 Frame Transfer Delay (FTD) configured as part of this SAC. This is the minimum frame transfer delay (in milliseconds) that each… |
| 1.3.6.1.4.1.29601.2.88.4.1.1.5 | ColumnfsY1564SacFrDelayVar | read-write | current | This object specifies the Y1564 Frame Delay Variation configured as part of this SAC. This is the minimum frame delay variation (in milliseconds) that each ser… |
| 1.3.6.1.4.1.29601.2.88.4.1.1.6 | ColumnfsY1564SacAvailability | read-write | current | This object specifies the Y1564 Availability configured as part of this SAC. This is the maximum avaliablity that each services are expected to be met. Example… |
| 1.3.6.1.4.1.29601.2.88.4.1.1.7 | ColumnfsY1564SacRowStatus | read-write | current | This object specifies the row status and is used to create or delete a new entry by setting this object to the appropriate value as mentioned in SMI-v2. |
| 1.3.6.1.4.1.29601.2.88.5 | NodefsY1564ServiceConf | |||
| 1.3.6.1.4.1.29601.2.88.5.1 | TablefsY1564ServiceConfTable | not-accessible | current | This table contains Service Configuration information. It includes bandwidth profile parameters, VLAN Index and Interface Index which will be used to create a … |
| 1.3.6.1.4.1.29601.2.88.5.1.1 | RowfsY1564ServiceConfEntry | not-accessible | current | This entry contains information about a particular Y1564 Service specific configuration. |
| 1.3.6.1.4.1.29601.2.88.5.1.1.1 | ColumnfsY1564ServiceConfId | not-accessible | current | This object specifies the Y1564 Service Configuration Identifier. This is a free running index used to identify a Service Configuration. |
| 1.3.6.1.4.1.29601.2.88.5.1.1.2 | ColumnfsY1564ServiceConfColorMode | read-write | current | This object specifies whether the color-aware or color blind property is employed by the bandwidth profile. The default value for this object is ColorBlind. |
| 1.3.6.1.4.1.29601.2.88.5.1.1.3 | ColumnfsY1564ServiceConfCoupFlag | read-write | current | This object specifies the modes of operation of the rate enforcement algorithm. The choice of the value for CF has the effect of controlling the volume of the … |
| 1.3.6.1.4.1.29601.2.88.5.1.1.4 | ColumnfsY1564ServiceConfCIR | read-write | current | The committed information rate Must be >= 0. CIR must be less than or equal to EIR,if EIR > 0. |
| 1.3.6.1.4.1.29601.2.88.5.1.1.5 | ColumnfsY1564ServiceConfCBS | read-write | current | The committed burst size Must be > 0 if CIR > 0. Maximum allowable size will be jumbo frame size. |
| 1.3.6.1.4.1.29601.2.88.5.1.1.6 | ColumnfsY1564ServiceConfEIR | read-write | current | The excess information rate Must be >= 0. EIR must be greater than or equal to CIR,if EIR > 0. |
| 1.3.6.1.4.1.29601.2.88.5.1.1.7 | ColumnfsY1564ServiceConfEBS | read-write | current | The excess burst size Must be > 0 if EIR > 0. |
| 1.3.6.1.4.1.29601.2.88.5.1.1.8 | ColumnfsY1564ServiceConfRowStatus | read-write | current | This object specifies the row status and is used to create or delete a new entry by setting this object to the appropriate value as mentioned in SMI-v2. |
| 1.3.6.1.4.1.29601.2.88.6 | NodefsY1564ConfigTest | |||
| 1.3.6.1.4.1.29601.2.88.6.1 | TablefsY1564ConfigTestReportTable | not-accessible | current | This table contains the statistics of the SLA operation performed. |
| 1.3.6.1.4.1.29601.2.88.6.1.1 | RowfsY1564ConfigTestReportEntry | not-accessible | current | This entry specifies the statistics about a particular step in the SLA operation performed. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.1 | ColumnfsY1564ConfigTestReportSlaId | not-accessible | current | This object specifies the SLA Id of service configuration test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.2 | ColumnfsY1564ConfigTestReportFrSize | not-accessible | current | This object specifies the Y1564 frame size in SLA operation statistics. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.3 | ColumnfsY1564ConfigTestCurrentTestMode | not-accessible | current | This object specifies the Currently active test running as part of service configuration test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.4 | ColumnfsY1564ConfigTestReportStepId | not-accessible | current | This object specifies the Y1564 Step Index in SLA operation statistics. Step Id for each test as follows. 1. For Simple CIR Validation test, step Id will be on… |
| 1.3.6.1.4.1.29601.2.88.6.1.1.5 | ColumnfsY1564ConfigTestReportResult | read-only | current | This oject specifies the result of Service Configuration Test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.6 | ColumnfsY1564ConfigTestReportIrMin | read-only | current | This object indicates the Minimum value of Information Rate in KBPS for the test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.7 | ColumnfsY1564ConfigTestReportIrMean | read-only | current | This object indicates the Mean value of Information Rate in KBPS for the test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.8 | ColumnfsY1564ConfigTestReportIrMax | read-only | current | This object indicates the Maximum value of Information Rate in KBPS for the test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.9 | ColumnfsY1564ConfigTestReportFrLossCnt | read-only | current | This object indicates the number of frames lost during the test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.10 | ColumnfsY1564ConfigTestReportFrLossRatio | read-only | current | This object specifies the Frame Loss Ratio observed during the test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.11 | ColumnfsY1564ConfigTestReportFrTxDelayMin | read-only | current | This object specifies the Minimum Frame Transfer Delay observed during the test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.12 | ColumnfsY1564ConfigTestReportFrTxDelayMean | read-only | current | This object specifies the Mean Frame Transfer Delay observed during the test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.13 | ColumnfsY1564ConfigTestReportFrTxDelayMax | read-only | current | This object specifies the Maximum Frame Transfer Delay observed during the test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.14 | ColumnfsY1564ConfigTestReportFrDelayVarMin | read-only | current | This object specifies the Minimum Frame Delay Variation observed during the test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.15 | ColumnfsY1564ConfigTestReportFrDelayVarMean | read-only | current | This object specifies the Mean Frame Delay Variation observed during the test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.16 | ColumnfsY1564ConfigTestReportFrDelayVarMax | read-only | current | This object specifies the Maximum Frame Delay Variation observed during the test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.17 | ColumnfsY1564ConfigTestReportTestStartTime | read-only | current | This object specifies the service start time of the test in Y1564 for Service configuration test. |
| 1.3.6.1.4.1.29601.2.88.6.1.1.18 | ColumnfsY1564ConfigTestReportTestEndTime | read-only | current | This object specifies the service end time of the test in Y1564 for Service configuration test. |
| 1.3.6.1.4.1.29601.2.88.7 | NodefsY1564PerformanceTest | |||
| 1.3.6.1.4.1.29601.2.88.7.1 | TablefsY1564PerformanceTestTable | not-accessible | current | This table contains Service performance test related information. Each entry in this table corresponds to a configured SLA entry in fsy1564SlaTable. Entry in t… |
| 1.3.6.1.4.1.29601.2.88.7.1.1 | RowfsY1564PerformanceTestEntry | not-accessible | current | This entry contains information about a particular Y1564 performance specific configuration. |
| 1.3.6.1.4.1.29601.2.88.7.1.1.1 | ColumnfsY1564PerformanceTestIndex | not-accessible | current | This object specifies the Y1564 performance test Identifier. This is a free running index used to identify a service performance test. |
| 1.3.6.1.4.1.29601.2.88.7.1.1.2 | ColumnfsY1564PerformanceTestSlaList | read-write | current | This object specifies the SLA lists to be tested in Y1564 for Service performance test. Example: SLA 1, 2, 3, 5, 7, 10 should be given as 1-2-3-5-7-10 |
| 1.3.6.1.4.1.29601.2.88.7.1.1.3 | ColumnfsY1564PerformanceTestDuration | read-write | current | This object is used to configure the period to complete Service Performance Test.The default interval for this object is 2 hours. |
| 1.3.6.1.4.1.29601.2.88.7.1.1.4 | ColumnfsY1564PerformanceTestStatus | read-write | current | This object specifies the Y1564 Service Performance test initiation status. An enumerated value set to 'start' initiates service performance test will be start… |
| 1.3.6.1.4.1.29601.2.88.7.1.1.5 | ColumnfsY1564PerformanceTestRowStatus | read-write | current | Denotes the Row status of the service performance test entry. This object specifies the row status and is used to create or delete a new entry by setting this … |
| 1.3.6.1.4.1.29601.2.88.8 | NodefsY1564PerfTestReport | |||
| 1.3.6.1.4.1.29601.2.88.8.1 | TablefsY1564PerfTestReportTable | not-accessible | current | This table contains the statistics of the SLA operation performed. |
| 1.3.6.1.4.1.29601.2.88.8.1.1 | RowfsY1564PerfTestReportEntry | not-accessible | current | This entry specifies the statistics about a particular step in the SLA operation performed. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.1 | ColumnfsY1564PerfTestReportFrSize | not-accessible | current | This object specifies the frame size in SLA performance test statistics. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.2 | ColumnfsY1564PerfTestReportResult | read-only | current | This oject specifies the result of service Performance Test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.3 | ColumnfsY1564PerfTestReportIrMin | read-only | current | This object indicates the Minimum value of Information Rate in KBPS for the test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.4 | ColumnfsY1564PerfTestReportIrMean | read-only | current | This object indicates the Mean value of Information Rate in KBPS for the test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.5 | ColumnfsY1564PerfTestReportIrMax | read-only | current | This object indicates the Maximum value of Information Rate in KBPS for the test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.6 | ColumnfsY1564PerfTestReportFrLossCnt | read-only | current | This object indicates the number of frames lost during the test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.7 | ColumnfsY1564PerfTestReportFrLossRatio | read-only | current | This object specifies the Frame Loss Ratio observed during the test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.8 | ColumnfsY1564PerfTestReportFrTxDelayMin | read-only | current | This object specifies the Minimum Frame Transfer Delay observed during the test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.9 | ColumnfsY1564PerfTestReportFrTxDelayMean | read-only | current | This object specifies the Mean Frame Transfer Delay observed during the test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.10 | ColumnfsY1564PerfTestReportFrTxDelayMax | read-only | current | This object specifies the Maximum Frame Transfer Delay observed during the test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.11 | ColumnfsY1564PerfTestReportFrDelayVarMin | read-only | current | This object specifies the Minimum Frame Delay Variation observed during the test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.12 | ColumnfsY1564PerfTestReportFrDelayVarMean | read-only | current | This object specifies the Mean Frame Delay Variation observed during the test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.13 | ColumnfsY1564PerfTestReportFrDelayVarMax | read-only | current | This object specifies the Maximum Frame Delay Variation observed during the test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.14 | ColumnfsY1564PerfTestReportAvailability | read-only | current | This object specifies the Availability of the service during the test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.15 | ColumnfsY1564PerfTestReportUnavailableCount | read-only | current | This object specifies the Unavailable frame count during the test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.16 | ColumnfsY1564PerfTestReportTestStartTime | read-only | current | This object specifies the service start time of the test in Y1564 for Service performance test. |
| 1.3.6.1.4.1.29601.2.88.8.1.1.17 | ColumnfsY1564PerfTestReportTestEndTime | read-only | current | This object specifies the service end time of the test in Y1564 for Service performance test. |
| 1.3.6.1.4.1.29601.2.88.9 | NodefsY1564Notification | |||
| 1.3.6.1.4.1.29601.2.88.9.0 | NodefsY1564Traps | |||
| 1.3.6.1.4.1.29601.2.88.9.0.1 | NotificationfsY1564FailureTrap | current | This trap is generated when there is any failure on a link. | |
| 1.3.6.1.4.1.29601.2.88.9.1 | NodefsY1564TrapObjects | |||
| 1.3.6.1.4.1.29601.2.88.9.1.1 | ScalarfsY1564TrapSlaId | accessible-for-notify | current | This object refers to the SLA Id on which the Y1564 is enabled. And will be used in sending the failure Traps. |
| 1.3.6.1.4.1.29601.2.88.9.1.2 | ScalarfsY1564TypeOfFailure | accessible-for-notify | current | This object provides the text indicating a particular failure condition. 'Unrecoverable/Transaction failure' will be set, when the below defectes are detected … |