ARICENT-fs6374-MIB
171 objects
The Proprietary MIB for Loss and Delay measurement based on IETF RFC6374
Imported Objects
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.107 | Identityfs6374MIB | The Proprietary MIB for Loss and Delay measurement based on IETF RFC6374 | ||
| 1.3.6.1.4.1.29601.2.107.1 | Nodefs6374ServiceConfig | |||
| 1.3.6.1.4.1.29601.2.107.1.1 | Tablefs6374ServiceConfigTable | not-accessible | current | This object specifies a table that holds the service configurations. |
| 1.3.6.1.4.1.29601.2.107.1.1.1 | Rowfs6374ServiceConfigEntry | not-accessible | current | This object specifies Service Config Entry. |
| 1.3.6.1.4.1.29601.2.107.1.1.1.1 | Columnfs6374ContextId | not-accessible | current | This object specifies the unique identifier to identifies the virtual router context.Currently, the implementation supports only a single virtual instance of t… |
| 1.3.6.1.4.1.29601.2.107.1.1.1.2 | Columnfs6374ServiceName | not-accessible | current | This object specifies the unique name of the LSP/PW Service. |
| 1.3.6.1.4.1.29601.2.107.1.1.1.3 | Columnfs6374MplsPathType | read-write | current | This object specifies the Mpls type which could be Tunnel/LSP or PW. |
| 1.3.6.1.4.1.29601.2.107.1.1.1.4 | Columnfs6374FwdTnlIdOrPwId | read-write | current | This object specifies the ID which could be Tunnel Id for unidirectional in forward direction or PW Id based on Mpls type. |
| 1.3.6.1.4.1.29601.2.107.1.1.1.5 | Columnfs6374RevTnlId | read-write | current | This object specifies the ID which is the Tunnel Id for unidirectional in reverse direction. |
| 1.3.6.1.4.1.29601.2.107.1.1.1.6 | Columnfs6374SrcIpAddr | read-write | current | This object specifies the originating IP Address of the unidirectional Tunnel or PW. |
| 1.3.6.1.4.1.29601.2.107.1.1.1.7 | Columnfs6374DestIpAddr | read-write | current | This object specifies the terminating IP Address of the unidirectional Tunnel or PW. |
| 1.3.6.1.4.1.29601.2.107.1.1.1.8 | Columnfs6374EncapType | read-write | current | This object specifies the header type. |
| 1.3.6.1.4.1.29601.2.107.1.1.1.9 | Columnfs6374TrafficClass | read-write | current | This object specifies the traffic class. |
| 1.3.6.1.4.1.29601.2.107.1.1.1.10 | Columnfs6374RowStatus | read-create | current | This object specifies the status of service configuration row. The writable columns in a row can be changed even if the row is active but writable columns cann… |
| 1.3.6.1.4.1.29601.2.107.1.1.1.11 | Columnfs6374DyadicMeasurement | read-write | current | This object specifies the Dyadic Measurement status as enabled or disabled. |
| 1.3.6.1.4.1.29601.2.107.1.1.1.12 | Columnfs6374TSFNegotiation | read-write | current | This object specifies the Timestamp Format Negotiation status as enabled or disabled. This configuration is applicable only for Non-dyadic Two-way DM and Combi… |
| 1.3.6.1.4.1.29601.2.107.1.1.1.13 | Columnfs6374TSNegotiatedFormat | read-only | current | This object specifies the Negotiated Time Stamp Format of the querier. This negotiated format is applicable only for Non-dyadic Two-way DM and Combined LMDM. T… |
| 1.3.6.1.4.1.29601.2.107.1.1.1.14 | Columnfs6374DyadicProactiveRole | read-write | current | This object specifies the Dyadic Measurement Proactive Role status as active or passive. If configured as passive, dyadic will initiated only after initiated f… |
| 1.3.6.1.4.1.29601.2.107.1.1.1.15 | Columnfs6374QueryTransmitRetryCount | read-write | current | This object specifies the maximum number of retries of queries by a session when querier is not getting response from the responder. This object is used for co… |
| 1.3.6.1.4.1.29601.2.107.1.1.1.16 | Columnfs6374SessionIntervalQueryStatus | read-write | current | This object specifies the Session Interval Query status as enabled or disabled. This is applicable only for sending SQI TLV. Whereas for responding to SQI TLV … |
| 1.3.6.1.4.1.29601.2.107.1.1.1.17 | Columnfs6374MinReceptionIntervalInMilliseconds | read-write | current | This object specifies the minimum time interval between two query packets at which the service is ready to receive the packets. This object is used for congest… |
| 1.3.6.1.4.1.29601.2.107.2 | Nodefs6374ParamsConfig | |||
| 1.3.6.1.4.1.29601.2.107.2.1 | Tablefs6374ParamsConfigTable | not-accessible | current | This object specifies all the configurations related to LM and DM as per virtual context of the router. |
| 1.3.6.1.4.1.29601.2.107.2.1.1 | Rowfs6374ParamsConfigTableEntry | not-accessible | current | This object specifies per virtual context LM and DM configuration parameters. An entry in this table is created when a virtual context is created. |
| 1.3.6.1.4.1.29601.2.107.2.1.1.1 | Columnfs6374LMType | read-write | current | This object specifies the type of LM calculation. oneway(1) Indicates that calculation of LM will be in one way. twoway(2) Indicates that calculation of LM wil… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.2 | Columnfs6374LMMethod | read-write | current | This object specifies the mode in which LM feature will work. direct(1) Indicates that the LM feature will work in Direct Method. inferred(2) Indicates that LM… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.3 | Columnfs6374LMMode | read-write | current | This object specifies the method of LM calculation. onDemand(1) Indicates that calculation of LM will be done based on user request. proActive(2) Indicates tha… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.4 | Columnfs6374LMNoOfMessages | read-write | current | This object specifies the number of queries to be sent in a session when method for LM calculation is Ondemand. This object cannot be modified when fs6374LMTra… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.5 | Columnfs6374LMTimeIntervalInMilliseconds | read-write | current | This object specifies the time interval between two query packets for LM with the granularity of 10milliseconds. This object cannot be modified when fs6374LMTr… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.6 | Columnfs6374LMTimeStampFormat | read-write | current | This object specifies the preferred timestamp format which will be used for LM. The below specified timestamp formats are supported for Loss Measurement but no… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.7 | Columnfs6374LMTransmitStatus | read-write | current | This object specifies the status of loss transmit. |
| 1.3.6.1.4.1.29601.2.107.2.1.1.8 | Columnfs6374DMType | read-write | current | This object specifies the type of DM calculation. oneway(1) Indicates that calculation of DM will be one-way. twoway(2) Indicates that calculation of DM will b… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.9 | Columnfs6374DMMode | read-write | current | This object specifies the method of DM calculation. onDemand(1) Indicates that calculation of DM will be done based on user request. proActive(2) Indicates tha… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.10 | Columnfs6374DMTimeIntervalInMilliseconds | read-write | current | This object specifies the time interval between two query packets for DM with the granularity of 10milliseconds. This object cannot be modified when fs6374DMTr… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.11 | Columnfs6374DMNoOfMessages | read-write | current | This object specifies the number of queries to be sent in a session when method for LM calculation is Ondemand. This object cannot be modified when fs6374DMTra… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.12 | Columnfs6374DMTimeStampFormat | read-write | current | This object specifies the preferred timestamp format which will be used for delay measurement calculation. The below specified timestamp formats are supported … |
| 1.3.6.1.4.1.29601.2.107.2.1.1.13 | Columnfs6374DMTransmitStatus | read-write | current | This object specifies the status of delay transmit and an Enumerated value set to 'start' to initiate 1DM or DMM transmission and 'stop' to stop 1DM or DMM tra… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.14 | Columnfs6374CmbLMDMType | read-write | current | This object specifies the combined LMDM calculation type provided by the service. The following two types are possible: oneway - Indicates that calculation of … |
| 1.3.6.1.4.1.29601.2.107.2.1.1.15 | Columnfs6374CmbLMDMMethod | read-write | current | This object specifies the combined LMDM calculation method provided by the service. The following two methods are possible: direct - Indicates that the combine… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.16 | Columnfs6374CmbLMDMMode | read-write | current | This object specifies the combined LMDM calculation mode provided by the service. The following two modes are possible: onDemand - Indicates that calculation o… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.17 | Columnfs6374CmbLMDMNoOfMessages | read-write | current | This object specifies the number of combined LMDM queries to be sent in a session when method for LM calculation is `Ondemand`. This object cannot be modified … |
| 1.3.6.1.4.1.29601.2.107.2.1.1.18 | Columnfs6374CmbLMDMTimeIntervalInMilliseconds | read-write | current | This object specifies the time interval between two combined LMDM query packets for LM with the granularity of 10 milliseconds. This object cannot be modified … |
| 1.3.6.1.4.1.29601.2.107.2.1.1.19 | Columnfs6374CmbLMDMTimeStampFormat | read-write | current | This object specifies the preferred timestamp format which will be used for combined LMDM calculation. The below specified timestamp formats are supported for … |
| 1.3.6.1.4.1.29601.2.107.2.1.1.20 | Columnfs6374CmbLMDMTransmitStatus | read-write | current | This object specifies combined LMDM calculation transmission status. The following two values are possible to set by administrator: start - To initiate combine… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.21 | Columnfs6374DMPaddingSize | read-write | current | This object specifies the size of the pattern to be included in the Padding TLV of DM message. This configuration is applicable only for Non-dyadic DM Measurem… |
| 1.3.6.1.4.1.29601.2.107.2.1.1.22 | Columnfs6374CmbLMDMPaddingSize | read-write | current | This object specifies the size of the pattern to be included in the Padding TLV of Combined LMDM message. This configuration is applicable only for Non-dyadic … |
| 1.3.6.1.4.1.29601.2.107.3 | Nodefs6374LMBuffer | |||
| 1.3.6.1.4.1.29601.2.107.3.1 | Tablefs6374LMTable | not-accessible | current | This object specifies the table that holds the detailed buffer information for Loss measurement measured at various time intervals. |
| 1.3.6.1.4.1.29601.2.107.3.1.1 | Rowfs6374LMTableEntry | not-accessible | current | This object specifies the Loss statistics table entry. |
| 1.3.6.1.4.1.29601.2.107.3.1.1.1 | Columnfs6374LMSessionId | not-accessible | current | This object specifies the Loss measurement session id. |
| 1.3.6.1.4.1.29601.2.107.3.1.1.2 | Columnfs6374LMSeqNum | not-accessible | current | This object specifies the locally maintained sequence number of loss Entries. |
| 1.3.6.1.4.1.29601.2.107.3.1.1.3 | Columnfs6374LMTxLossAtSenderEnd | read-only | current | This object specifies the transmit loss value which is calculated at sender end.This value is populated for Two-way measurement. |
| 1.3.6.1.4.1.29601.2.107.3.1.1.4 | Columnfs6374LMRxLossAtSenderEnd | read-only | current | This object specifies the receiver loss value which is calculated at sender end. This value is populated for Two-way measurement. |
| 1.3.6.1.4.1.29601.2.107.3.1.1.5 | Columnfs6374LMRxLossAtReceiverEnd | read-only | current | This object specifies the receiver loss value which is calculated at sender end. This value is populated for one-way measurement. |
| 1.3.6.1.4.1.29601.2.107.3.1.1.6 | Columnfs6374LMMeasurementTimeTakenInMilliseconds | read-only | current | This object specifies the time taken to measure loss. |
| 1.3.6.1.4.1.29601.2.107.3.1.1.7 | Columnfs6374LMTransmitResultOK | read-only | current | This object specifies the result of the operation: - true The Loss measurement Message (1LM or LMM) will be (or has been) sent. - false The Loss measurement Me… |
| 1.3.6.1.4.1.29601.2.107.3.1.1.8 | Columnfs6374LMTestPktsCount | read-only | current | This object specifies the total number of test PDUs transmitted at sender end for each transaction. This value is populated for measurement. |
| 1.3.6.1.4.1.29601.2.107.4 | Nodefs6374DMBuffer | |||
| 1.3.6.1.4.1.29601.2.107.4.1 | Tablefs6374DMTable | not-accessible | current | This object specifies the table that contains the detailed buffer information for delay measured at various times. |
| 1.3.6.1.4.1.29601.2.107.4.1.1 | Rowfs6374DMTableEntry | not-accessible | current | The object specifies the detailed delay buffer table entry. |
| 1.3.6.1.4.1.29601.2.107.4.1.1.1 | Columnfs6374DMSessionId | not-accessible | current | This object specifies the delay measurement session id. |
| 1.3.6.1.4.1.29601.2.107.4.1.1.2 | Columnfs6374DMSeqNum | not-accessible | current | This object specifies the locally maintained sequence number of delay entries. |
| 1.3.6.1.4.1.29601.2.107.4.1.1.3 | Columnfs6374DMDelayValue | read-only | current | This object specifies the measured delay value. |
| 1.3.6.1.4.1.29601.2.107.4.1.1.4 | Columnfs6374DMRTDelayValue | read-only | current | This object specifies the measured round trip delay value. |
| 1.3.6.1.4.1.29601.2.107.4.1.1.5 | Columnfs6374DMIPDV | read-only | current | This object specifies the Inter frame delay variation (IFDV), calculated with respect to current transaction. |
| 1.3.6.1.4.1.29601.2.107.4.1.1.6 | Columnfs6374DMPDV | read-only | current | This object specifies the Frame delay variation (IFDV), calculated with respect to current transaction. |
| 1.3.6.1.4.1.29601.2.107.4.1.1.7 | Columnfs6374DMTransmitResultOK | read-only | current | This object specifies the result of the operation: - true The Delay measurement Message (1DM or DMM) will be (or has been) sent. - false The Delay measurement … |
| 1.3.6.1.4.1.29601.2.107.5 | Nodefs6374LMStats | |||
| 1.3.6.1.4.1.29601.2.107.5.1 | Tablefs6374LMStatsTable | not-accessible | current | This object specifies the table that contains the summary of Loss information based on Service name and Session Id. |
| 1.3.6.1.4.1.29601.2.107.5.1.1 | Rowfs6374LMStatsTableEntry | not-accessible | current | The object specifies the loss Statistics table entry. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.1 | Columnfs6374LMStatsMplsType | read-only | current | This object specifies the Mpls type which could be Tunnel/Lsp or PW. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.2 | Columnfs6374LMStatsFwdTnlIdOrPwId | read-only | current | This object specifies the Tunnel Id for unidirectional in forward direction or PW Id based on Mpls type. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.3 | Columnfs6374LMStatsRevTnlId | read-only | current | This object specifies the Tunnel Id for unidirectional in reverse direction. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.4 | Columnfs6374LMStatsSrcIpAddr | read-only | current | This object specifies the source IP Address. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.5 | Columnfs6374LMStatsDestIpAddr | read-only | current | This object specifies the destination IP Address. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.6 | Columnfs6374LMStatsTrafficClass | read-only | current | This object specifies the traffic class. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.7 | Columnfs6374LMStatsMode | read-only | current | This object specifies the method (ondemand or proactive) used for LM. This is not applicable for one-way type. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.8 | Columnfs6374LMStatsMethod | read-only | current | This object specifies the method (inferred or direct) used for LM. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.9 | Columnfs6374LMStatsType | read-only | current | This object specifies the type (oneWay or twoWay) used for LM. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.10 | Columnfs6374LMStatsTimeStampFormat | read-only | current | This object specifies the value of timestamp format for the LM. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.11 | Columnfs6374LMStatsStartTime | read-only | current | This object specifies the time at which loss measurement starts. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.12 | Columnfs6374LMStatsFarEndLossMin | read-only | current | This object specifies the minimum value of far-end loss. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.13 | Columnfs6374LMStatsFarEndLossMax | read-only | current | This object specifies the maxmium value of far-end loss. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.14 | Columnfs6374LMStatsFarEndLossAvg | read-only | current | This object specifies the average of the far-end loss measured for a transaction. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.15 | Columnfs6374LMStatsNearEndLossMin | read-only | current | This object specifies the minimum value of near-end loss. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.16 | Columnfs6374LMStatsNearEndLossMax | read-only | current | This object specifies the maxmium value of near-end loss. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.17 | Columnfs6374LMStatsNearEndLossAvg | read-only | current | This object specifies the average of the near-end loss measured for a transaction. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.18 | Columnfs6374LMStatsTxPktCount | read-only | current | This object specifies the number of frames with loss information sent for a transaction. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.19 | Columnfs6374LMStatsRxPktCount | read-only | current | This object specifies the number of frames with loss information received for a transaction. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.20 | Columnfs6374LMStatsThroughputpercent | read-only | current | This object specifies the throughput loss value for a transaction. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.21 | Columnfs6374LMStatsResponseErrors | read-only | current | This object specifies the number of responses dropped due to errors. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.22 | Columnfs6374LMStatsResponseTimeout | read-only | current | This object specifies the number of queries Timedout. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.23 | Columnfs6374LMStatsMeasurementOnGoing | read-only | current | This object specifies whether for the particular session, measurement is ongoing or not. Complete(0) Indicates measurement is ongoing. OnGoing(1) Indicates mea… |
| 1.3.6.1.4.1.29601.2.107.5.1.1.24 | Columnfs6374LMDyadicMeasurement | read-only | current | This object specifies the Loss Calculation done over dyadic Measurement enable(1) Indicates that Loss over Dyadic disable(2) Indicates normal loss measurement. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.25 | Columnfs6374LMRemoteSessionId | read-only | current | This object specifies Remote Session ID for the Loss/Comb LMDM calculation done over dyadic Measurement. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.26 | Columnfs6374LMDyadicProactiveRole | read-only | current | This object specifies the Loss Calculation done for which Dyadic proactive role. |
| 1.3.6.1.4.1.29601.2.107.5.1.1.27 | Columnfs6374IsLMBufferSQIEnabled | read-only | current | This object specifies whether the SQI was enabled or disabled for the corresponding session when the LM buffer was created. A value of 'true' indicates that SQ… |
| 1.3.6.1.4.1.29601.2.107.6 | Nodefs6374DMStats | |||
| 1.3.6.1.4.1.29601.2.107.6.1 | Tablefs6374DMStatsTable | not-accessible | current | This object specifies the table which holds the summary of delay information based on Service name and Session Id. |
| 1.3.6.1.4.1.29601.2.107.6.1.1 | Rowfs6374DMStatsTableEntry | not-accessible | current | This object specifies the delay Statistics table entry. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.1 | Columnfs6374DMStatsMplsType | read-only | current | This object specifies the MPLS type which could be Tunnel/LSP or PW. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.2 | Columnfs6374DMStatsFwdTnlIdOrPwId | read-only | current | This object specifies the tunnel Id for unidirectional in forward direction or PW Id based on Mpls type. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.3 | Columnfs6374DMStatsRevTnlId | read-only | current | This object specifies the tunnel Id for unidirectional in reverse direction. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.4 | Columnfs6374DMStatsSrcIpAddr | read-only | current | This object specifies the source IP Address. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.5 | Columnfs6374DMStatsDestIpAddr | read-only | current | This object specifies the destination IP Address. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.6 | Columnfs6374DMStatsTrafficClass | read-only | current | This object specifies the traffic class. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.7 | Columnfs6374DMStatsMode | read-only | current | This object specifies the method (ondemand or proactive) used for DM. This is not applicable for one-way type. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.8 | Columnfs6374DMStatsType | read-only | current | This object specifies type (oneWay or twoWay) used for DM. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.9 | Columnfs6374DMStatsTimeStampFormat | read-only | current | This object specifies the value of timestamp format for the DM. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.10 | Columnfs6374DMStatsStartTime | read-only | current | This object specifies the time at which delay measurement starts. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.11 | Columnfs6374DMStatsMinDelay | read-only | current | This object specifies the minimum value of delay. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.12 | Columnfs6374DMStatsMaxDelay | read-only | current | This object specifies the maximum value of frame-delay. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.13 | Columnfs6374DMStatsAvgDelay | read-only | current | This object specifies the average delay measured for a one-way or two-way delay measurement for a transaction. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.14 | Columnfs6374DMStatsMinRTDelay | read-only | current | This object specifies the minimum value of round trip delay. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.15 | Columnfs6374DMStatsMaxRTDelay | read-only | current | This object specifies the maximum value of round trip delay. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.16 | Columnfs6374DMStatsAvgRTDelay | read-only | current | This object specifies the average delay measured for a round trip delay measurement for a transaction. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.17 | Columnfs6374DMStatsMinIPDV | read-only | current | This object specifies the minimum value of IPDV. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.18 | Columnfs6374DMStatsMaxIPDV | read-only | current | This object specifies the maximum value of IPDV. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.19 | Columnfs6374DMStatsAvgIPDV | read-only | current | This object specifies the average delay measured for a IPDV. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.20 | Columnfs6374DMStatsMinPDV | read-only | current | This object specifies the minimum value of PDV. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.21 | Columnfs6374DMStatsMaxPDV | read-only | current | This object specifies the maximum value of PDV. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.22 | Columnfs6374DMStatsAvgPDV | read-only | current | This object specifies the average delay measured for a PDV. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.23 | Columnfs6374DMStatsTxPktCount | read-only | current | This object specifies the count of transmitted DM packets. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.24 | Columnfs6374DMStatsRxPktCount | read-only | current | This object specifies the count of received DM packets. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.25 | Columnfs6374DMStatsResponseErrors | read-only | current | This object specifies the number of Responses dropped due to errors. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.26 | Columnfs6374DMStatsResponseTimeout | read-only | current | This object specifies the number of queries timedout. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.27 | Columnfs6374DMStatsMeasurementOnGoing | read-only | current | This object specifies whether for the particular session, measurement is ongoing or not. Complete(0) Indicates measurement is ongoing. OnGoing(1) Indicates mea… |
| 1.3.6.1.4.1.29601.2.107.6.1.1.28 | Columnfs6374DMDyadicMeasurement | read-only | current | This object specifies the Delay Calculation done over dyadic Measurement enable(1) Indicates that Delay over Dyadic disable(2) Indicates normal Delay measureme… |
| 1.3.6.1.4.1.29601.2.107.6.1.1.29 | Columnfs6374DMRemoteSessionId | read-only | current | This object specifies Remote Session ID for the Delay/Comb LMDM calculation done over dyadic Measurement. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.30 | Columnfs6374DMDyadicProactiveRole | read-only | current | This object specifies the Delay Calculation done for which Dyadic proactive role. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.31 | Columnfs6374DMStatsPaddingSize | read-only | current | This object specifies the Delay Calculation done for which Padding size. |
| 1.3.6.1.4.1.29601.2.107.6.1.1.32 | Columnfs6374IsDMBufferSQIEnabled | read-only | current | This object specifies whether the SQI was enabled or disabled for the corresponding session when the DM buffer was created. A value of 'true' indicates that SQ… |
| 1.3.6.1.4.1.29601.2.107.7 | Nodefs6374Stats | |||
| 1.3.6.1.4.1.29601.2.107.7.1 | Tablefs6374StatsTable | not-accessible | current | This object specifies the list of per virtual context 6374 Module Statistics. |
| 1.3.6.1.4.1.29601.2.107.7.1.1 | Rowfs6374StatsTableEntry | not-accessible | current | This object specifies the Per virtual context 6374 Module Statistics. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.1 | Columnfs6374StatsLmmOut | read-write | current | This object specifies the number of LMM PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.2 | Columnfs6374StatsLmmIn | read-write | current | This object specifies the number of LMM PDUs received. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.3 | Columnfs6374StatsLmrOut | read-write | current | This object specifies the number of LMR PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.4 | Columnfs6374StatsLmrIn | read-write | current | This object specifies the number of LMR PDUs received. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.5 | Columnfs6374Stats1LmOut | read-write | current | This object specifies the number of 1LM PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.6 | Columnfs6374Stats1LmIn | read-write | current | This object specifies the number of 1LM PDUs received. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.7 | Columnfs6374Stats1DmOut | read-write | current | This object specifies the number of 1DM PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.8 | Columnfs6374Stats1DmIn | read-write | current | This object specifies the number of 1DM PDUs received. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.9 | Columnfs6374StatsDmmOut | read-write | current | This object specifies the number of DMM PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.10 | Columnfs6374StatsDmmIn | read-write | current | This object specifies the number of DMM PDUs received. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.11 | Columnfs6374StatsDmrOut | read-write | current | This object specifies the number of DMR PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.12 | Columnfs6374StatsDmrIn | read-write | current | This object specifies the number of DMR PDUs received. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.13 | Columnfs6374StatsCmb1LmDmOut | read-only | current | This object specifies the number of combined LMDM one way PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.14 | Columnfs6374StatsCmb1LmDmIn | read-only | current | This object specifies the number of combined LMDM one way PDUs received. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.15 | Columnfs6374StatsCmbLmmDmmOut | read-only | current | This object specifies the number of combined LMDM two way PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.16 | Columnfs6374StatsCmbLmmDmmIn | read-only | current | This object specifies the number of combined LMDM two way PDUs received. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.17 | Columnfs6374StatsCmbLmrDmrOut | read-only | current | This object specifies the number of combined LMR DMR two way PDUs transmitted. |
| 1.3.6.1.4.1.29601.2.107.7.1.1.18 | Columnfs6374StatsCmbLmrDmrIn | read-only | current | This object specifies the number of combined LMR DMR two ways PDUs received. |
| 1.3.6.1.4.1.29601.2.107.8 | Nodefs6374SystemConfig | |||
| 1.3.6.1.4.1.29601.2.107.8.1 | Tablefs6374SystemConfigTable | not-accessible | current | This object specifies the table that contains system level information. |
| 1.3.6.1.4.1.29601.2.107.8.1.1 | Rowfs6374SystemConfigEntry | not-accessible | current | This object specifies the SystemConfig entry. |
| 1.3.6.1.4.1.29601.2.107.8.1.1.1 | Columnfs6374SystemControl | read-write | current | This object specifies the administrative system control status of 6374 module. The value 'start' (1) indicates that all resources required by the module should… |
| 1.3.6.1.4.1.29601.2.107.8.1.1.2 | Columnfs6374ModuleStatus | read-write | current | This object specifies the administrative module status of 6374 module. This enables or disables 6374 in the system. A value of 'enabled' (1) indicates that 637… |
| 1.3.6.1.4.1.29601.2.107.8.1.1.3 | Columnfs6374DMBufferClear | read-write | current | This object specifies the trigger to remove the contents of Buffer maintained for storing delay measured at various times. Note: Get operation value should be … |
| 1.3.6.1.4.1.29601.2.107.8.1.1.4 | Columnfs6374LMBufferClear | read-write | current | This object specifies the trigger to remove the contents of Buffer maintained for storing loss measured at various times. Note: Get operation value should be i… |
| 1.3.6.1.4.1.29601.2.107.8.1.1.5 | Columnfs6374DebugLevel | read-write | current | This object is used to enable the tracing in the selected submodule. A 32 bit integer is used to store the Tracing level in the specified module. Different Tra… |
| 1.3.6.1.4.1.29601.2.107.8.1.1.6 | Columnfs6374TSFormatSupported | read-only | current | This object specifies the timestamp format supported in the system. The below specified timestamp formats are supported in the system. timeStampFormatNTP (2), … |
| 1.3.6.1.4.1.29601.2.107.9 | Nodefs6374Notifications | |||
| 1.3.6.1.4.1.29601.2.107.9.1 | Tablefs6374NotificationsTable | not-accessible | current | This object specifies the list of Traps supported in 6374. |
| 1.3.6.1.4.1.29601.2.107.9.1.1 | Rowfs6374NotificationsEntry | not-accessible | current | This object specifies the notification entry. |
| 1.3.6.1.4.1.29601.2.107.9.1.1.1 | Columnfs6374LMDMTrapControl | read-write | current | This object specifies a vector of Boolean notification types, used to enable or disable the LM&DM Traps: bTrapUnsupportedVersion (1), bTrapUnsupportedControlCo… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FS6374SuppTimeStampFormat | INTEGER{ tsFormatNTP (1), tsFormatIEEE1588 (2) } | current | This object specifies the Timestamp formats supported by the system. tsFormatNTP(1) This format consists of a 32-bit seconds field followed by a 32-bit fractional seconds (picoseconds) field, so that it can be regarded … |
| FS6374TimeRepresentation | OCTET STRING (SIZE (8)) | current | A specification used to represent time stamp. field octets contents range 1 1-4 seconds 0..4294967295 2 5-8 nanoseconds/picoseconds 0..0..4294967295 |
| FS6374TimeStampFormat | INTEGER{ timeStampFormatNull (0), timeStampFormatSequence (1), timeStampFormatNTP (2), timeStampFormatIEEE1588 (3) } | current | An enumerated value indicates the timestamp format used for loss and delay. TimeStampFormatNull(0) Indicates that timestamp field does not contain a meaningful timestamp. TimeStampFormatSequence(1) Indicates that the ti… |
| Fs6374TransmitStatus | INTEGER { start (1), stop (2), ready (3), notReady (4) } | current | An enumerated value indicates whether particular transmission can be initiated. start(1) To initiate the transmission. stop(2) To stop the transmission. ready(3) Indicates transmission can be initiated. notReady(4) Indi… |
| FS6374Traps | BITS{ none (0), bTrapUnsupportedVersion (1), bTrapUnsupportedControlCode (2), bTrapUnsupportedDataFormat (3), bTrapConnectionMismatch (4), bTrapUnsupportedMandatoryTLVObject (5), bTrapUnsupportedTimeStamp (6), bTrapResponseTimeout (7), bTrapResourceUnavailable (8), bTrapTestAbort(9), bTrapProactiveTestRestart(10), bTrapUnsupportedQueryInterval(11) } | current | Indicates the Traps : none(0) Dummy Bit bTrapUnsupportedVersion(1) Protocol version not supported bTrapUnsupportedControlCode(2) Control Code not supported bTrapUnsupportedDataFormat(3) Data format specified in query no… |