ARRIS-CER-VIDEO-MIB
299 objects
This MIB manages the MPEG / VIDEO software on the Arris CER.
Imported Objects
| ARRIS-MIB | arrisE6Cer |
| CADANT-CMTS-EQUIPMENT-MIB | trapCounter trapSeverity |
| CADANT-TC | AdminState InetAddressIPv4or6 |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4115.1.9.1.1 | IdentitycerMpegVideoMIB | This MIB manages the MPEG / VIDEO software on the Arris CER. | ||
| 1.3.6.1.4.1.4115.1.9.1.1.1 | NodecerVideoObjects | |||
| 1.3.6.1.4.1.4115.1.9.1.1.1.1 | NodecerVideoControlGroup | |||
| 1.3.6.1.4.1.4115.1.9.1.1.1.1.1 | ScalarcervControlPatInterval | read-write | current | Retransmission interval for PAT tables in milliseconds. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.1.2 | ScalarcervControlPmtInterval | read-write | current | Retransmission interval for PMT tables in milliseconds. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.1.3 | ScalarcervControlUnicastTimeoutInterval | read-write | current | The unicast (VOD) TS timeout interval in seconds. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.1.4 | ScalarcervControlMaxProgramsPerQamChannel | read-write | current | Max number of programs per channel. Without this parameter, with 8:8 port mapping, the maximum port value allowed would be 255. Since we can fit at least 10 SD… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.1.5 | ScalarcervControlOverSubscriptionRecovery | read-write | current | If this is set to TRUE, then the E6000 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. It … |
| 1.3.6.1.4.1.4115.1.9.1.1.1.1.6 | ScalarcervControlDuplicateTsidCheck | read-write | current | If this is set to never, then the E6000 disablse detection of duplicate TSIDs, allowing any pair of channels to use the same value. If it is set to streamingZo… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.1.7 | ScalarcervControlPreEncDetect | read-write | current | If this is set to TRUE, then the E6000 will detect pre-encrypted streams, and will avoid re-encrypting the traffic when forwarding it downstream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.1.8 | ScalarcervControlOnProgConflictDropOld | read-write | current | If this is set to FALSE, if a new stream from a different source IP address maps to the same output QAM channel and program number as an existing stream, the E… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.1.9 | ScalarcervControlDefaultJitter | read-write | current | The default jitter buffer depth for a channel in milliseconds. Zero means do not compensate for jitter (i.e., send immediately). |
| 1.3.6.1.4.1.4115.1.9.1.1.1.1.10 | ScalarcervControlUdpPortOffset | read-write | current | The low UDP port number in the block of 256 UDP ports assigned to a channel. cervControlUdpPortOffset plus cervControlMaxProgramsPerQamChannel must be less tha… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.1.11 | ScalarcervErmProtocol | read-write | current | The type of ERM protocol for ERM communications. Must be configured before configuring ERM parameters. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.1.12 | ScalarcervStaticVodPidRemapScheme | read-write | current | The type of PID remapping scheme to use to static (table-based) VOD. Session-based VOD is only allowed to use dynamic remapping. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2 | TablecerVideoQamStreamTable | not-accessible | current | This table stores MPEG Video related data on a per QAM channel basis. Rows in this table are auto-created when a row of type dchannelVideo is created in the po… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1 | RowcerVideoQamStreamEntry | not-accessible | current | Video QAM channel configuration parameters |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.1 | ColumncervQamTransportStreamID | read-write | current | The MPEG transport_stream_id used when transmitting PAT tables on this QAM channel. All QAM streams in the same streaming zone must have a unique TSID value, u… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.2 | ColumncervQamTsMibIndex | read-only | current | The index of the outgoing Transport Stream on this QAM channel. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.3 | ColumncervQamPatInterval | read-write | current | Retransmission interval for PAT tables in milliseconds. A value of zero means use the global value. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.4 | ColumncervQamPmtInterval | read-write | current | Retransmission interval for PMT tables in milliseconds. A value of zero means use the global value. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.5 | ColumncervQamOverSubscriptionRecoveryEnabled | read-write | current | If this is set to enabled, then the E6000 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. … |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.6 | ColumncervQamPreEncDetect | read-write | current | If this is set to enabled, then the E6000 will detect Motorola pre-encrypted streams, and will avoid re-encrypting the traffic when forwarding it downstream. I… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.7 | ColumncervQamOnProgConflictDropOld | read-write | current | If this is set to enabled, if a new stream from a different source IP address maps to the same output QAM channel and program number as an existing stream, the… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.8 | ColumncervQamServiceGroupName | read-write | current | The name of the Service Group that this QAM channel is assigned to. A null string means the channel is not assigned to any Service Group. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.9 | ColumncervQamServiceGroupIndex | read-write | current | The index for the Service Group, required for session-based ERMs. Zero means the channel is not assigned to a service group. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.10 | ColumncervQamVeqIndex | read-write | current | The index of the Virtual Edge that this QAM channel is assigned to. This value must be provided when the row is created and cannot be updated. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.11 | ColumncervQamUdpBasePort | read-write | current | This attribute is only used when cervePortMap is set to 8x8 or 10x6. The start of the UDP port range is assigned to this QAM channel for the purposes of routin… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.12 | ColumncervQamJitterDepth | read-write | current | The setting for jitter-buffer depth in milliseconds for video program streams on this channel. Can be set to a small value to reduce latency through the box, o… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.13 | ColumncervQamUdpPortOffset | read-write | current | The offset in the 256 UDP port block for the lowest numbered UDP port mapped to this channel. cervQamUdpPortOffset plus cervControlMaxProgramsPerQamChannel mus… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.14 | ColumncervQamClearCounters | read-write | current | Always reads as false. Setting it to true clears all IEQ video counters related to this DS channel. Setting it to false has no effect. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.15 | ColumncervQamSubtype | read-write | current | The type(s) of Ieq traffic to be carried over this QAM channel. Used for reporting config to ERM session managers. Linear is not yet supported. Channels cannot… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.3 | TablecerVideoQamStreamStateTable | not-accessible | current | This table provides MPEG Video status on a per QAM channel basis. Rows in this table are auto-created when a row of type dchannelVod, dchannelSdv, or dchannelB… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.3.1 | RowcerVideoQamStreamStateEntry | not-accessible | current | Video QAM channel status |
| 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.1 | ColumncervQamTotalPatsTx | read-only | current | The total number of unique PAT Tables that have been generated for this QAM channel. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.2 | ColumncervQamTotalProgramsTx | read-only | current | The accumulated number of Programs transmitted on this QAM channel. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.3 | ColumncervQamCurrentProgramsTx | read-only | current | The number of Programs currently being transmitted on this QAM channel. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.4 | ColumncervQamPeakProgramsTx | read-only | current | The peak number of Programs transmitted since the channel was activated. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.5 | ColumncervQamStreamStatus | read-only | current | Current status of this QAM Transport stream |
| 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.6 | ColumncervQamTimeActivated | read-only | current | The value of sysUpTime when this stream was last activated. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.7 | ColumncervQamTimeActive | read-only | current | The total time that MPEG stream has been active. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.8 | ColumncervQamTimeDeactivated | read-only | current | The value of sysUpTime when this stream was last deactivated. Zero if not-known. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.9 | ColumncervQamOverSubscribed | read-only | current | Indicates if the bandwidth of this QAM is currently over-subscribed (receiving more packets than can be transmitted). If the QAM is currently over-subscribed, … |
| 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.10 | ColumncervQamCurrentBandwidth | read-only | current | For table-based VOD,the current bandwidth in use. For Session-based VOD and SDV, the total requested bandwidth. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.11 | ColumncervQamPeakBandwidth | read-only | current | For table-based VOD,the peak bandwidth in use since the channel was activated. For session-based VOD and SDV, the peak requested bandwidth since the channel wa… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.4 | TablecerVideoReplicaChanTable | not-accessible | current | This Table contains one row for each replicated channel. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.4.1 | RowcerVideoReplicaChanEntry | not-accessible | current | Video replicated channel configuration |
| 1.3.6.1.4.1.4115.1.9.1.1.1.4.1.1 | ColumncervReplicaSourceIfIndex | not-accessible | current | The ifIndex of the source (base) video channel. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.4.1.2 | ColumncervReplicatedIfIndex | not-accessible | current | The ifIndex of the replicated channel associated with this source video channel. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.4.1.3 | ColumncervReplicaRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.5 | TablecerveServiceGroupTable | not-accessible | current | This table contains a mapping, per VE, of RF connectors to SG names. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.5.1 | RowcerveServiceGroupEntry | not-accessible | current | Video service group configuration. A row in this table is created when the first channel on an RF connector is assigned to a SG. All channels on the same RF po… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.5.1.2 | ColumncerveServiceGroupSlot | not-accessible | current | The card slot plus one of the channel in this service group. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.5.1.3 | ColumncerveServiceGroupConnector | not-accessible | current | The DS connector number plus one of the channel in this service group. Only 1..8 is legal for first generation DCAM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.5.1.4 | ColumncerveServiceGroupName | read-only | current | The name of the video Service Group. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.5.1.5 | ColumncerveServiceGroupIndex | read-only | current | The index number for the SG, required for session-based ERMs. Set by assigning a SG index to a channel on this RF connector. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7 | TablecerVideoUdpIpStreamTable | not-accessible | current | This table displays the current incoming Transport Streams that are to be forwarded to an active QAM channel. Only streams being forwarded are in this table. E… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1 | RowcerVideoUdpIpStreamEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.2 | ColumncervUdpIpDestIpAddr | accessible-for-notify | current | The DEST IP address of the incoming TS being mapped to the specified QAM Channel. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.3 | ColumncervUdpIpDestUdpPort | accessible-for-notify | current | The destination UDP Port of the incoming TS being mapped to the specified QAM Channel. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.4 | ColumncervUdpIpSrcIpAddr | accessible-for-notify | current | The SRC IP address of the incoming TS being mapped to the specified QAM Channel. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.5 | ColumncervUdpIpStreamStatus | read-only | current | The status of this stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.6 | ColumncervUdpIpTsMibIndex | read-only | current | The index of the entry in the cerVideoStreamTable corresponding to this table entry. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.7 | ColumncervUdpIpActiveQamIfIndex | read-only | current | The ifIndex of the table-based QAM channel that this stream is currently mapped to. This is zero if the input stream is session-based and therefore is mapped t… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.8 | ColumncervUdpIpTimeActivated | read-only | current | The value of sysUpTime when this stream was last activated. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.9 | ColumncervUdpIpTimeActive | read-only | current | The total time that the stream has been active. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.10 | ColumncervUdpIpTimeDeactivated | read-only | current | The value of sysUpTime when this stream was last deactivated. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.11 | ColumncervUdpIpPacketCount | read-only | current | The number of UDP packets received for this stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.12 | ColumncervUdpIpBadSyncCount | read-only | current | The number of ingress MPEG frames (TSPs)without the MPEG Sync byte. Since there can be multiple MPEG frames per UDP packet, this count could be higher than cer… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.13 | ColumncervUdpIpChanContainer | read-only | current | The channel container for this session-based input stream. This is zero if the input stream is mapped using table-based VOD. Only one of cervUdpIpActiveQamIfIn… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.14 | ColumncervUdpIpPidPassthruEnable | read-only | current | Whether or not to remap the PIDs in this stream. True means no remap. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.15 | ColumncervUdpIpAddrType | read-only | current | Type of IP address. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.16 | ColumncervUdpIpStreamType | read-only | current | If dynamic, then a message to the session ERM is needed if the stream fails. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8 | TablecerVideoStreamTable | not-accessible | current | This table stores basic information on all Transport Streams in the E6000. It covers both incoming and outgoing ones. The MPEG Manager automatically creates an… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8.1 | RowcerVideoStreamEntry | not-accessible | current | Video stream status table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.1 | ColumncervStreamDirectionIndex | not-accessible | current | The direction of this Transport Stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.2 | ColumncervStreamTsMibIndex | not-accessible | current | The unique index that identifies the Transport Stream within the E6000. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.3 | ColumncervStreamPatVersion | read-only | current | The version number of the current PAT Table for this Transport Stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.4 | ColumncervStreamTsID | read-only | current | The MPEG transport_stream_id in the PAT tables on this Transport Stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.5 | ColumncervStreamProgramCount | read-only | current | The number of Programs currently in this Transport Stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.6 | ColumncervStreamPatCurrTimeCreated | read-only | current | The value of sysUpTime when the current PAT was created. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.7 | ColumncervStreamPatCurrTimeActive | read-only | current | The total time the current PAT has been active. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.8 | ColumncervStreamPatPrevTimeCreated | read-only | current | The value of sysUpTime when the predecessor of this PAT was created. Zero if not-known. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.9 | ColumncervStreamProgramFilteredCount | read-only | current | The number of Programs currently being filtered from this Transport Stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.10 | ColumncervStreamPidCount | read-only | current | The total number of PIDs used by this Transport Stream. It is the sum of all Program cervStreamProgEsCount + PMT PIDs + ECM PIDs (if present) + PCR PIDs (if di… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.11 | ColumncervStreamTspCount | read-only | current | The total number of MPEG Transport Stream Packets sent/received on this stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.12 | ColumncervStreamDroppedTspCount | read-only | current | The total number of MPEG Transport Stream Packets dropped on this stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9 | TablecerVideoStreamProgramTable | not-accessible | current | This table stores basic information for each Program in each Transport Stream known to the E6000. Each entry in cerVideoStreamTable will have at least one entr… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1 | RowcerVideoStreamProgramEntry | not-accessible | current | Video program status table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.1 | ColumncervStreamProgTsMibIndex | not-accessible | current | The unique index that identifies the Transport Stream containing this Program. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.2 | ColumncervStreamProgIndex | accessible-for-notify | current | The Program Number for this program within the associated Transport Stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.3 | ColumncervStreamProgPmtVersion | read-only | current | The version number of the current PMT Table for this Program. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.4 | ColumncervStreamProgPmtPid | read-only | current | The MPEG PID used for the PMT Table for this Program. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.5 | ColumncervStreamProgEcmPid | read-only | current | The MPEG PID used to for the ECM Table for this Program. This is set to 0 in the program is unencrypted. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.6 | ColumncervStreamProgPcrPid | read-only | current | The MPEG PID used to for the PCR for this Program. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.7 | ColumncervStreamProgEsCount | read-only | current | The number of Elementary Streams currently in this Program. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.8 | ColumncervStreamProgDescCount | read-only | current | The number of Descriptors in the PMT 'first_loop' for this Program. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.9 | ColumncervStreamPmtCurrTimeCreated | read-only | current | The value of sysUpTime when the current PMT was created. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.10 | ColumncervStreamPmtCurrTimeActive | read-only | current | The total time the current PMT has been active. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.11 | ColumncervStreamPmtPrevTimeCreated | read-only | current | The value of sysUpTime when the predecessor of this PMT was created. Zero if not-known. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.12 | ColumncervStreamProgBitrate | read-only | current | The bitate in Kbps, of this Program. This may have a value of 0 if the bitrate is not known. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.13 | ColumncervStreamProgPidFilteredCnt | read-only | current | The number of PIDs currently being filtered from this Program. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.14 | ColumncervStreamProgContinuityErrCnt | read-only | current | The continuity-counter errors seen on PIDs in this Program |
| 1.3.6.1.4.1.4115.1.9.1.1.1.10 | TablecerVideoStreamEsTable | not-accessible | current | This table stores basic information for each Elementary Stream in each Transport Stream known to the E6000. Each entry in cerVideoProgTable will have at least … |
| 1.3.6.1.4.1.4115.1.9.1.1.1.10.1 | RowcerVideoStreamEsEntry | not-accessible | current | Elementary stream status table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.1 | ColumncervStreamEsTsMibIndex | not-accessible | current | The unique index that identifies the Transport Stream containing this Program. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.2 | ColumncervStreamEsProgIndex | not-accessible | current | The Program Number for the program containing this ES. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.3 | ColumncervStreamEsPidIndex | not-accessible | current | The MPEG PID used for this Elementary Stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.4 | ColumncervStreamEsType | read-only | current | The type of this Elementary Streams. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.5 | ColumncervStreamEsDescCount | read-only | current | The number of Descriptors in the PMT 'second_loop' for this Elementary Stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.6 | ColumncervStreamEsContinuityErrCnt | read-only | current | The continuity-counter errors seen on this PID. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.7 | ColumncervStreamEsTspCount | read-only | current | The number of MPEG frames (TSPs) seen on this PID. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.11 | TablecerVideoStreamDataEsTable | not-accessible | current | This table stores basic information for each data-only Elementary Stream in each Transport Stream known to the E6000. For is one row for each ghost-pid, whethe… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.11.1 | RowcerVideoStreamDataEsEntry | not-accessible | current | Data-only Elementary stream status table. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.11.1.1 | ColumncervStreamDataEsTsMibIndex | not-accessible | current | The unique index that identifies the Transport Stream containing this Program. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.11.1.2 | ColumncervStreamDataEsPidIndex | not-accessible | current | The MPEG PID used for this Elementary Stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.11.1.3 | ColumncervStreamDataEsIsGhostPid | read-only | current | True if this is a ghost PID. False if it is an si-stream PID (not supported yet). |
| 1.3.6.1.4.1.4115.1.9.1.1.1.11.1.4 | ColumncervStreamDataEsForwarding | read-only | current | True is we are forwarding this PID. False if we are dropping it. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.11.1.5 | ColumncervStreamDataEsContinuityErrCnt | read-only | current | The continuity-counter errors seen on this PID. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.12 | TablecerVideoStreamDescTable | not-accessible | current | This table stores MPEG Descriptors for each Elementary Stream and Program known to the E6000. The PMT PID is used to index Program Descriptors while the Elemen… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.12.1 | RowcerVideoStreamDescEntry | not-accessible | current | Video stream descriptor table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.12.1.1 | ColumncervStreamDescTsMibIndex | not-accessible | current | The unique index that identifies the Transport Stream containing this Descriptor. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.12.1.2 | ColumncervStreamDescPidIndex | not-accessible | current | The MPEG PID used for this Elementary Stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.12.1.3 | ColumncervStreamDescIndex | not-accessible | current | The Descriptor index. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.12.1.4 | ColumncervStreamDescTag | read-only | current | The Descriptor tag. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.12.1.5 | ColumncervStreamDescLen | read-only | current | The Descriptor length. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.12.1.6 | ColumncervStreamDescData | read-only | current | The Descriptor data. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.13 | TablecerVideoQamJitterStatusTable | not-accessible | current | This Table contains status information about the QAM dejitter buffers on a per-program basis. Entries in this table only persist for the life-time of the activ… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.13.1 | RowcerVideoQamJitterStatusEntry | not-accessible | current | Video Qam Jitter Status table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.1 | ColumncervQamJitterStatusIfIndex | not-accessible | current | The ifIndex of the QAM channel associated with this entry. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.2 | ColumncervQamJitterStatusProgNumber | not-accessible | current | The output program number associated with this entry. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.3 | ColumncervQamJitterStatusCurrStatus | read-only | current | The status of the jitter buffer for this program. idle - waiting for input TS packets init - transmitting TS packets at nominal rate, not locked to incoming PC… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.4 | ColumncervQamJitterStatusUnderflowCnt | read-only | current | Number of times the jitter buffer has underflowed during the lifetime of this program. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.5 | ColumncervQamJitterStatusOverflowCnt | read-only | current | Number of times the jitter buffer has overflowed during the lifetime of this program. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.6 | ColumncervQamJitterStatusBufLength | read-only | current | The current size of the jitter buffer for this program in milliseconds. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.7 | ColumncervQamJitterStatusPcrJitter | read-only | current | The estimate of the current network jitter. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.8 | ColumncervQamJitterStatusPcrCnt | read-only | current | The total number of PCR samples processed in this program. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.9 | ColumncervQamJitterStatusPcrDiscontinuityCnt | read-only | current | The total number of PCR discontinuities observed in this program. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.10 | ColumncervQamJitterStatusBufDepth | read-only | current | The initial jitter-buffer depth in milliseconds for this program stream. May have been dynamically set via R6 NGOD interface. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.14 | TablecerVideoProgRemapTable | not-accessible | current | This table displays the active Program mappings for Transport Streams. It is indexed using udp/ip/ip/inProg/qamIfIndex to support multiple output programs for … |
| 1.3.6.1.4.1.4115.1.9.1.1.1.14.1 | RowcerVideoProgRemapEntry | not-accessible | current | Program to transport stream mapping table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.14.1.1 | ColumncervProgRemapTsMibIndex | not-accessible | current | The TS Mib Index of the incoming TS. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.14.1.2 | ColumncervProgRemapInProgIndex | not-accessible | current | The incoming Program value related to this Program remapping. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.14.1.3 | ColumncervProgRemapActiveQamIfIndex | not-accessible | current | The ifIndex of the QAM channel that this Program remapping applies to. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.14.1.4 | ColumncervProgRemapOutProg | not-accessible | current | The output Program value related to this Program mapping rule. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.14.1.5 | ColumncervProgRemapTimeActivated | read-only | current | The value of sysUpTime when this Program was last activated. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.14.1.6 | ColumncervProgRemapTimeActive | read-only | current | The total time that the Program has been active. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.15 | TablecerVideoPidRemapTable | not-accessible | current | This table displays the active PID mappings for Transport Streams. It is indexed using udp/ip/ip/inPid/qamIfIndex to support multiple output programs for each … |
| 1.3.6.1.4.1.4115.1.9.1.1.1.15.1 | RowcerVideoPidRemapEntry | not-accessible | current | PID to transport stream mapping table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.1 | ColumncervPidRemapTsMibIndex | not-accessible | current | The TS Mib Index of the incoming TS. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.2 | ColumncervPidRemapInPidIndex | not-accessible | current | The incoming PID value related to this PID remapping. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.3 | ColumncervPidRemapActiveQamIfIndex | not-accessible | current | The ifIndex of the QAM channel that this PID remapping applies to. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.4 | ColumncervPidRemapOutPid | not-accessible | current | The output PID value related to this PID mapping rule. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.5 | ColumncervPidRemapActivePidType | read-only | current | The type of PID whether PSI or Elementary stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.6 | ColumncervPidRemapTimeActivated | read-only | current | The value of sysUpTime when this PID was last activated. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.7 | ColumncervPidRemapTimeActive | read-only | current | The total time that the PID has been active. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.17 | TablecerVideoLookupTsMibIndexToIfIndexTable | not-accessible | current | This table maps the TsIndex of an outgoing Transport Stream on a QAM channel to the ifIndex for that channel. The Transport Stream is assumed to be an 'outgoin… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.17.1 | RowcerVideoLookupTsMibIndexToIfIndexEntry | not-accessible | current | TSID to QAM channel mapping table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.17.1.1 | ColumncervLookupTsIndexIfIndex | read-only | current | The ifIndex for the QAM channel transmitting this TransportStreamIndex. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.18 | TablecerVideoLookupQamTsMibIndexToInTsMibIndexTable | not-accessible | current | This table maps the TransportStreamIndex of a Transport Stream on a QAM channel to the corresponding incoming TransportStreamIndexes. cervTsMibIndex - an outgo… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.18.1 | RowcerVideoLookupQamTsMibIndexToInTsMibIndexEntry | not-accessible | current | TSID to incoming transport stream mapping table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.18.1.1 | ColumncervLookupInTsMibIndex | read-only | current | MIB TsIndex for an incoming transport stream(IP). |
| 1.3.6.1.4.1.4115.1.9.1.1.1.19 | TablecerVideoLookupTsMibIndexToUdpIpTable | not-accessible | current | This table maps the TransportStreamIndex of an incoming Transport Stream to the IP address and UDP port for that Transport Stream. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.19.1 | RowcerVideoLookupTsMibIndexToUdpIpEntry | not-accessible | current | TSID to IP address and port mapping table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.19.1.1 | ColumncervLookupTsMibIndexUdpPort | read-only | current | The UDP receiving the Transport Stream for TransportStreamIndex. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.19.1.2 | ColumncervLookupTsMibIndexIpAddrDest | read-only | current | The DEST IP address receiving the Transport Stream for TransportStreamIndex. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.19.1.3 | ColumncervLookupTsMibIndexIpAddrSrc | read-only | current | The SRC IP address receiving the Transport Stream for TransportStreamIndex. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.19.1.4 | ColumncervLookupTsMibIndexAddrType | read-only | current | Type of IP address. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.19.1.5 | ColumncervLookupTsMibIndexVe | read-only | current | The VE for this TsMibIndex. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.20 | TablecerVirtualEdgeTable | not-accessible | current | This table stores parameters for each Virtual Edge video object. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.20.1 | RowcerVirtualEdgeEntry | not-accessible | current | Virtual Edge configuration parameter table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.1 | ColumncerveIndex | accessible-for-notify | current | The index of the Virtual Edge. Although not officially supported, allow a VE for each of 12 DCAMs. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.2 | ColumncerveName | read-create | current | This is the name of the Virtual Edge. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.3 | ColumncervePortMap | read-create | current | Only 8x8 and session is currently supported. Ignored for sdv-only channels. Manual mapping, where individual streams manually configured to map to channela in … |
| 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.4 | ColumncerveSzIndex | read-create | current | Index of Streaming Zone used by this Virtual Edge. Multiple Virtual Edges may have the same SZ. Zero means unassigned. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.5 | ColumncerveGlobal | read-create | current | Whether or not this VE spans all DCAMs. Can only be set when the row is created. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.6 | ColumncerveAdminState | read-create | current | Setting the VE AdminState to down blocks all video traffic to all video channels in the VE. It also takes down any ERM connection to the VE. It does not change… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.7 | ColumncerveRowStatus | read-create | current | The RowStatus for controlling entries in this table. Allowed values are createAndGo, destroy, and active. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.21 | TablecerveStatusTable | not-accessible | current | This table stores statistics for each Virtual Edge video object. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.21.1 | RowcerveStatusEntry | not-accessible | current | Virtual Edge statistics table. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.21.1.2 | ColumncerveStatusDroppedPkts | read-only | current | Number of incoming UDP packets to one of this VE's data plane addresses whose DPORT was not currently valid and was therefore dropped by the NPU. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.21.1.3 | ColumncerveStatusBlockedPkts | read-only | current | Number of incoming UDP packets whose DPORT was in the valid subrange, but whose DPORT was on the blocked list, so the packet was dropped by the NPU. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.21.1.4 | ColumncerveStatusFragmentedPkts | read-only | current | Number of incoming UDP packets with a valid DIP and DPORT, but were dropped by the NPU because they were fragmented. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.21.1.7 | ColumncerveStatusOperStatus | read-only | current | Whether the VE is operationally IS or OOS. It is IS if any channel in the VE is IS. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.22 | TablecerveErmSrvDiscTable | not-accessible | current | This table stores parameters for each Virtual Edge video ERM object, if defined. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.22.1 | RowcerveErmSrvDiscEntry | not-accessible | current | Virtual Edge ERM configuration parameter table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.2 | ColumncerveErmSrvDiscErmIndex | read-create | current | This is the ERM used for this Virtual Edge. Multiple VEs may use same ERM. Zero means unassigned. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.3 | ColumncerveErmSrvDiscComponentName | read-create | current | The ERM component name used on the service discovery interface, which is unique per VE. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.4 | ColumncerveErmSrvDiscAdminState | read-create | current | Whether or not the VE servicediscovery interface is enabled. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.5 | ColumncerveErmSrvDiscControlIpAddr | read-create | current | This is the source loopback address used when communicating with the ERM and for receiving messages from the ERM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.6 | ColumncerveErmSrvDiscAddrType | read-only | current | Type of IP address. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.7 | ColumncerveErmSrvDiscControlIfIndex | read-create | current | The ifIndex of the loopback interface for communicating with an ERM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.8 | ColumncerveErmSrvDiscRowStatus | read-create | current | The RowStatus for controlling entries in this table. Allowed values are createAndGo, destroy, and active. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23 | TablecerveErmD6StatTable | not-accessible | current | This table stores ERM NGOD D6 statistics for each Virtual Edge video object. A row in this table is autocreated when a row in the cerveErmSvcDiscTable is Creat… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1 | RowcerveErmD6StatEntry | not-accessible | current | Virtual Edge ERM statistics table. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.2 | ColumncerveErmD6StatTcpConnSuccess | read-only | current | Number of successful TCP connections to ERM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.3 | ColumncerveErmD6StatTcpConnFail | read-only | current | Number of failed attempts to create a TCP connection to the ERM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.4 | ColumncerveErmD6StatVrepEstablishTime | read-only | current | Timestamp when last VREP Establish state was reached with ERM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.5 | ColumncerveErmD6StatVrepOpenSent | read-only | current | Number of VREP OPEN messages sent to ERM |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.6 | ColumncerveErmD6StatVrepOpenRcvd | read-only | current | Number of VREP OPEN messages received from ERM |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.7 | ColumncerveErmD6StatUpdsSent | read-only | current | Number of VREP UPDATE messages sent to ERM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.8 | ColumncerveErmD6StatUpdsRcvd | read-only | current | Number of VREP UPDATE messages received from ERM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.9 | ColumncerveErmD6StatVrepKeepAliveSent | read-only | current | Number of Keep Alive messages sent to ERM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.10 | ColumncerveErmD6StatVrepKeepAliveRcvd | read-only | current | Number of Keep Alive messages received from ERM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.11 | ColumncerveErmD6StatRemoteSzName | read-only | current | Contains the Streaming Zone name from the ERM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.12 | ColumncerveErmD6StatRemoteCompName | read-only | current | Contains the component name from the ERM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.13 | ColumncerveErmD6StatRemoteVrepId | read-only | current | Contains VREP ID at the ERM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.14 | ColumncerveErmD6StatRemoteVrepVersion | read-only | current | Contains VREP version at the ERM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.15 | ColumncerveErmD6StatRemoteVrepRoutes | read-only | current | Contains the number of active routes from the ERM for this VE. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.16 | ColumncerveErmD6StatRemoteHoldTime | read-only | current | Contains VREP/DRRP hold-time in seconds from the ERM for connection timeout. Zero means do not time-out. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.17 | ColumncerveErmD6StatVrepStatus | read-only | current | The current state of the VREP state machine (the D6 TCP connection to the ERM). |
| 1.3.6.1.4.1.4115.1.9.1.1.1.24 | TablecerveDataAddrMapTable | not-accessible | current | This table contains the data plane addresses for the VE objects. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.24.1 | RowcerveDataAddrMapEntry | not-accessible | current | Dataplane IP addresses to virtual edge mapping table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.24.1.2 | ColumncerveDataAddrMapIpAddr | not-accessible | current | This a data plane address for the VE. All UDP packets to this address are port-mapped. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.24.1.3 | ColumncerveDataAddrMapAddrType | read-create | current | Type of IP address. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.24.1.4 | ColumncerveDataAddrMapIfIndex | read-create | current | The ifIndex of the loopback interface used to assign the dataplane address. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.24.1.5 | ColumncerveDataAddrMapEdgeInputGrp | read-create | current | The edge input group for reporting to RAMSDEN. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.24.1.6 | ColumncerveDataAddrMapErmInputPort | read-create | current | The input port number used by the ERM for session-based VOD port mapping. Zero means no value is set. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.24.1.7 | ColumncerveDataAddrMapRowStatus | read-create | current | The RowStatus for controlling entries in this table. Allowed values are createAndGo, destroy, and active. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.25 | TablecerveInputPortTable | not-accessible | current | This table maps the session-based VOD input port number to a dataplane address. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.25.1 | RowcerveInputPortEntry | not-accessible | current | Input port number to a dataplane address mapping table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.25.1.2 | ColumncerveInputPortErmInputPort | not-accessible | current | The input port number used by the ERM for session-based VOD port mapping. Zero means no value is set. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.25.1.3 | ColumncerveInputPortIpAddr | read-only | current | This a data plane address for the VE. All UDP packets to this address are port-mapped. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.25.1.4 | ColumncerveInputPortAddrType | read-only | current | Type of IP address. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.26 | TablecerveUdpPortMapTable | not-accessible | current | This table contains the blocks of UDP ports in a VE that are currently mapped to a Qam channel. This table is only used when cervePortMap is set to 8x8 or 10x6. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.26.1 | RowcerveUdpPortMapEntry | not-accessible | current | UDP port to QAM channel mapping table |
| 1.3.6.1.4.1.4115.1.9.1.1.1.26.1.2 | ColumncerveUdpPortMapUdpBasePort | not-accessible | current | This is the lowest port number in the block of UDP ports mapped to this QAM channel. The total number of UDP ports in this block depends on the type of port ma… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.26.1.3 | ColumncerveUdpPortMapQamIfIndex | read-only | current | This is the ifIndex of the QAM channel to which this block of UDP ports maps. Is unique among all rows in the table. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.27 | TablecerveBandwidthTable | not-accessible | current | This table describes the bandwidth on NSI links belonging to this virtual edge (for reporting To an ERM). |
| 1.3.6.1.4.1.4115.1.9.1.1.1.27.1 | RowcerveBandwidthEntry | not-accessible | current | Bandwidth allocation configuration for a virtual edge |
| 1.3.6.1.4.1.4115.1.9.1.1.1.27.1.2 | ColumncerveBandIpAddr | not-accessible | current | This a data plane address for the Virtual Edge being assigned this bandwidth. Must be an address already assigned to the VE. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.27.1.3 | ColumncerveBandIfIndex | not-accessible | current | This is the ifIndex of the ethernet or link-aggregate interface for the interface whose bandwidth is being assigned to this VE. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.27.1.4 | ColumncerveBandAllocation | read-create | current | The amount of bandwidth in Kbps of the NSI interface to be reported for the VE over the service discovery ERM connection. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.27.1.5 | ColumncerveBandAddrType | read-only | current | Type of IP address. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.27.1.6 | ColumncerveBandRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.28 | TablecerveUdpBlockedPortTable | not-accessible | current | A row in this table contains the a range of one or more UDP ports, where any ingress UDP stream with a port in this range to any of the VE dataplane addresses … |
| 1.3.6.1.4.1.4115.1.9.1.1.1.28.1 | RowcerveUdpBlockedPortEntry | not-accessible | current | Blocked UDP port mapping for a virtual edge |
| 1.3.6.1.4.1.4115.1.9.1.1.1.28.1.2 | ColumncerveUdpBlockedPortIpAddr | not-accessible | current | This a data plane address for the Virtual Edge where the UDP is being blocked. Must be an address already assigned to the VE or 0.0.0.0, which means that the p… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.28.1.3 | ColumncerveUdpBlockedPortLowPort | not-accessible | current | This is the low port number to be blocked for the VE. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.28.1.4 | ColumncerveUdpBlockedPortHighPort | read-create | current | This is the high port number to be blocked. Is same as low port if only a one port range. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.28.1.5 | ColumncerveUdpBlockedPortAddrType | read-create | current | Type of IP address. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.28.1.6 | ColumncerveUdpBlockedPortRowStatus | read-create | current | The RowStatus for controlling entries in this table. Allowed values are createAndGo, destroy, and active. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29 | TablecerErmSrvDiscTable | not-accessible | current | This table describes the configuration parameters associated with remote Edge Resource Manager (ERM) devices. Use of multiple entries within this table enables… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1 | RowcerErmSrvDiscEntry | not-accessible | current | An entry corresponds to an individual ERM configuration. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.1 | ColumncerErmSrvDiscIndex | accessible-for-notify | current | Index of ERM configuration entry. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.2 | ColumncerErmSrvDiscName | read-create | current | Name of ERM configuration entry. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.3 | ColumncerErmSrvDiscDescription | read-create | current | Contains text description of the ERM configuration. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.4 | ColumncerErmSrvDiscAddrType | read-create | current | Type of IP address. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.5 | ColumncerErmSrvDiscRemoteIpAddr | read-create | current | The ERM remote address. An IPv4 address or hostname is acceptable as an address. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.6 | ColumncerErmSrvDiscRemoteFqdnIpAddr | read-only | current | The IP address for an FQDN in cerErmRemoteIpName. This is 0.0.0.0 if cerErmSrvDiscRemoteIpAddr is an IPv4 address. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.7 | ColumncerErmSrvDiscPort | read-create | current | Contains TCP port value used for DRRP listener/connections. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.8 | ColumncerErmSrvDiscHoldTime | read-create | current | Contains VREP/DRRP hold-time in seconds for connection timeout |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.9 | ColumncerErmSrvDiscKeepAliveTime | read-create | current | Contains VREP/DRRP interval in seconds for sending keep-alive messages. Must be less than cerErmHoldTime. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.10 | ColumncerErmSrvDiscBwInterval | read-create | current | Interval in seconds to send AvailableBandwidth UDPATE messages. Zero means no reporting of bandwidth. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.11 | ColumncerErmSrvDiscBwThreshold | read-create | current | Change in bandwith utilisation in Kbps required to trigger an AvailableBandwidth UDPATE messages. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.12 | ColumncerErmSrvDiscCost | read-create | current | Cost to advertise in VREP OPEN message. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.13 | ColumncerErmSrvDiscConnRetryTimeout | read-create | current | The maximum time to wait before retrying establishing the ERM connection. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.14 | ColumncerErmSrvDiscRowStatus | read-create | current | The values that control the creation/deletion of ERMs on the CER. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.30 | TablecerStreamingZoneTable | not-accessible | current | Table mapping a streaming zone index to a streaming zone name. Duplicate TSIDs must be in different SZs. Each VE is in one SZ. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.30.1 | RowcerStreamingZoneEntry | not-accessible | current | Table mapping a streaming zone index to a streaming zone name. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.30.1.1 | ColumncervSzIndex | not-accessible | current | MIB Index for a streaming zone. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.30.1.2 | ColumncervSzQamNetworkId | read-create | current | Network ID for a streaming zone. Must be unique for all streaming zones. Zero means not set. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.30.1.3 | ColumncervSzName | read-create | current | Configured name of the streaming zone. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.30.1.4 | ColumncervSzVpmeSdIndex | read-create | current | The security-domain instance number uniquely identifies the VPME instance for the E6000. Zero means no SD is assigned. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.30.1.5 | ColumncervSzRowStatus | read-create | current | The values that control the creation/deletion of streaming zones on the CER. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.31 | TablecerVideoCountsTable | not-accessible | current | This table stores IEQ video counts for each DCAM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.31.1 | RowcerVideoCountsEntry | not-accessible | current | IEQ Video counts per DCAM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.31.1.1 | ColumncerVideoCountsCardId | not-accessible | current | This the slot number of DCAM doing the counts. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.31.1.2 | ColumncerVideoCountsBadSyncPkts | read-only | current | Number of incoming port-mapped UDP packets dropped because of not containing valid MPEG. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.31.1.3 | ColumncerVideoCountsDroppedPkts | read-only | current | Number of valid incoming MPEG packets that were were dropped by the DCAM because of a program number conflict, oversubscription condition, or MPTS pass-thru co… |
| 1.3.6.1.4.1.4115.1.9.1.1.1.31.1.4 | ColumncerVideoCountsFragments | read-only | current | Number of multicast packet fragments dropped in the DCAM. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.32 | NodecerVideoTrapsInfo | |||
| 1.3.6.1.4.1.4115.1.9.1.1.1.32.1 | ScalarcerVideoStatus | accessible-for-notify | current | ERM connection status of E6000. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.32.2 | ScalarcerVideoErrorStr | accessible-for-notify | current | Description of error encountered on the ERM interface. |
| 1.3.6.1.4.1.4115.1.9.1.1.1.33 | NodecerVideoNotifs | |||
| 1.3.6.1.4.1.4115.1.9.1.1.1.33.0 | NodecerVideoTraps | |||
| 1.3.6.1.4.1.4115.1.9.1.1.1.33.0.1 | NotificationcerVideoSrvDiscErmConnection | current | This trap is sent when the Service Discovery ERM connection fails. This can occur for a number of reasons, the Virtual Edge may not be able to successfully est… | |
| 1.3.6.1.4.1.4115.1.9.1.1.1.33.0.2 | NotificationcerVideoStreamFailure | current | This trap is sent when the E6000 detects a problem with the incoming video stream. This can be a problem parsing a PAT or PMT in the stream, a jitter buffer un… | |
| 1.3.6.1.4.1.4115.1.9.1.1.1.33.0.3 | NotificationcerVideoServiceFailure | current | This trap is sent when the E6000 detects a problem with forwarding an incoming stream to a QAM channel. This can be as a result of the UDP port being blocked, … | |
| 1.3.6.1.4.1.4115.1.9.1.1.1.33.0.4 | NotificationcerVideoQamOversubscription | current | This trap is sent when the E6000 detects oversubscription on a QAM channel and has taken corrective action. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CerDescriptorBuffer | OCTET STRING (SIZE (0..255)) | current | A buffer that contains MPEG Descriptor data. |
| CerDescriptorIndex | Integer32 ( 1..65535 ) | current | An identifier that uniquely identifies an MPEG Descriptor within a given Program or Elementary Stream. |
| CerDescriptorTag | Integer32 ( 1..255 ) | current | A convenient type definition for MPEG Descriptor Tags values. |
| CerElementaryStreamType | Integer32 ( 1..255 ) | current | A convenient type definition for MPEG Elementary Stream Type values. |
| CerErmProtocolType | INTEGER { ngod(1), rpc(2), rmi(3), none(4) } | current | A convenient type definition for which type of protocol to use for communication with an ERM. ngod - Comcast Next Generation on Demand 2.0 protocol rpc - TWC Remote Procedure Call protocol rmi - CableLabs Remote Managem… |
| CerIeqQamType | INTEGER { vod(1), sdv(2), linear(3), vodsdv(4) } | current | The Type of IEQ QAM channel: vod - Video On Demand sdv - Switched Digital Video linear - Broadcast video vodsdv - VOD or SDV |
| CerMulticastType | INTEGER { pim (1), igmp (2), none (3) } | current | A convenient type definition for the multicast type for SDV/broadcast. |
| CerPerChanEnable | INTEGER { enabled (1), disabled (2), global (3) } | current | A convenient type definition for per-channel feature configuration. These can be as follows enabled - the feature is enabled for this channel disabled - the feature is disabled for this channel global - the feature has … |
| CerPID | Integer32 ( 0..8191 ) | current | A convenient type definition for MPEG PID values. |
| CerPidType | INTEGER { es(1), psi(2), ghost(3) } | current | A convenient type definition for PID - whether PSI or ES. PSI - the typical program defined by PAT & PMT tables ES - a stream that contains only PIDs with not references to PAT/PMT tables (si-stream) ghost - neither of … |
| CerProgram | Unsigned32 | current | A convenient type definition for MPEG Program Number values. |
| CerProgStatus | INTEGER { active(1), timingOut(2), inactive(3) } | current | A convenient type definition for MPEG Program status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states inactive … |
| CerServiceGroupNameIndexType | Integer32 ( 1..65535 ) | current | A convenient type definition for the index associated with a video Service Group instance. |
| CerStreamType | INTEGER { static (1), dynamic (2), redundant (3) } | current | Defines the type of stream in the UdpIpStream table static - Either a static UDP port map or manual map of a single port (future). dynamic - Set up via a message from a Session ERM. redundant - Redundant dynamic input s… |
| CerTransportStreamDirection | INTEGER { incoming(1), outgoing(2) } | current | A convenient type definition for the direction of a Transport Stream incoming - the Transport Stream is being received by the E6000, typically over IP outgoing - the Transport Stream is being generated by the E6000 and … |
| CerTransportStreamIndex | Unsigned32 ( 1..1073741823 ) | current | An identifier that uniquely identifies an MPEG Transport Stream in the E6000 MPEG Manager. This could represent an incoming or outgoing TS, or could represent an SPTS or MPTS. |
| CerTransportStreamStatus | INTEGER { active(1), timingOut(2), inactive(3) } | current | A convenient type definition for MPEG transport stream status states. These can be as follows active - currently passing video traffic blocked - no video passing currently, the stream is blocked inactive - not passing A… |
| CerUdpPortMapType | INTEGER { map8x8 (1), map10x6 (2), session (3) } | current | Defines the type of dataplane UDP port mapping used by a Virtual Edge as one of the following map8x8 - Static map: Upper 8 bits of UDP port determines the channel; lower 8 bits, the program number. map10x6 - Static map:… |
| CerVirtualEdgeIndexType | Integer32 ( 0..8 ) | current | A convenient type definition for the index associated with a Virtual Edge instance. |