ASCEND-ATMP-MIB
42 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.24.1 | ScalaratmpAgentMode | read-only | mandatory | The type of ATMP Agent. |
| 1.3.6.1.4.1.529.24.2 | ScalaratmpAgentType | read-only | mandatory | The type of ATMP HA Agent. ha-router means the HA will route the tunneled data to other networks. ha-gateway means the HA delivers tunneled data to other netwo… |
| 1.3.6.1.4.1.529.24.3 | ScalaratmpAgentUDPPort | read-only | mandatory | UDP port number to be used for ATMP. |
| 1.3.6.1.4.1.529.24.4 | ScalaratmpAgentGreMtu | read-only | mandatory | The maximum IP packet size that can be transmitted to a peer agent without performing fragmentation. The value 0 means this feature is disabled. |
| 1.3.6.1.4.1.529.24.5 | ScalaratmpAgentForceFragmentation | read-only | mandatory | To force fragmentation of large IP frames before they are sent to the peer agent even if the packet has the DF bit set. NOTE: this behavior is not standard and… |
| 1.3.6.1.4.1.529.24.6 | ScalaratmpAgentHAIdleLimit | read-only | mandatory | Time in minutes that the HA will allow a tunnel to have no traffic before tearing it down. The value 0 means this option is disabled. |
| 1.3.6.1.4.1.529.24.7 | ScalaratmpLastErrorGenerated | read-write | mandatory | This is the last error at the Agent level or Tunnel creation that was generated by the Agent. To clear the field and atmpAgentSentErrorTo do a set with the val… |
| 1.3.6.1.4.1.529.24.8 | ScalaratmpAgentSentErrorTo | read-only | mandatory | The IP Address of the agent that the generated was sent to. Clearing atmpLastErrorGenerated also clears this field. |
| 1.3.6.1.4.1.529.24.9 | ScalaratmpLastErrorRecv | read-write | mandatory | This is the last error at the Agent level or Tunnel creation that was received from the Peer Agent. To clear the field and atmpAgentRecvErrorFrom do a set with… |
| 1.3.6.1.4.1.529.24.10 | ScalaratmpAgentRecvErrorFrom | read-only | mandatory | The IP Address of the agent that the last error received was from. Clearing atmpLastErrorRecv also clears this field. |
| 1.3.6.1.4.1.529.24.11 | ScalaratmpEnableAtmpTraps | read-write | mandatory | Enable the atmp traps. |
| 1.3.6.1.4.1.529.24.12 | ScalaratmpAgentNumberFATunnels | read-only | mandatory | The number of FA tunnels. |
| 1.3.6.1.4.1.529.24.13 | ScalaratmpAgentNumberHATunnels | read-only | mandatory | The number of HA tunnels. |
| 1.3.6.1.4.1.529.24.14 | ScalaratmpAgentNumberLocalTunnels | read-only | mandatory | The number of Local client mode tunnels. |
| 1.3.6.1.4.1.529.24.15 | ScalaratmpAgentTunnelHighWater | read-only | mandatory | The high water mark on created ATMP tunnels. |
| 1.3.6.1.4.1.529.24.16 | TableatmpTunnelTable | not-accessible | mandatory | A list of ATMP tunnel entries. |
| 1.3.6.1.4.1.529.24.16.1 | RowatmpTunnelEntry | not-accessible | mandatory | A ATMP tunnel entry. |
| 1.3.6.1.4.1.529.24.16.1.1 | ColumnatmpTunnelIndex | read-only | mandatory | A unique index assigned to this tunnel. |
| 1.3.6.1.4.1.529.24.16.1.2 | ColumnatmpTunnelId | read-only | mandatory | The tunnel ID assigned to this tunnel. This number is assigned by the HA. NOTE: this number does *not* uniquely identify a tunnel. |
| 1.3.6.1.4.1.529.24.16.1.3 | ColumnatmpHAIpAddress | read-only | mandatory | The IP Address of this tunnel's HA. |
| 1.3.6.1.4.1.529.24.16.1.4 | ColumnatmpFAIpAddress | read-only | mandatory | The IP Address of this tunnel's FA. |
| 1.3.6.1.4.1.529.24.16.1.5 | ColumnatmpTunneledProtocol | read-only | mandatory | This value indicates the protocol(s) that the tunnel supports. The value is a sum. The sum initially takes the value zero. Then for each protocol that is suppo… |
| 1.3.6.1.4.1.529.24.16.1.6 | ColumnatmpTunnelType | read-only | mandatory | The type of tunnel this is. |
| 1.3.6.1.4.1.529.24.16.1.7 | ColumnatmpTunnelState | read-only | mandatory | These are the states the tunnel can be in. |
| 1.3.6.1.4.1.529.24.16.1.8 | ColumnatmpMnIpAddress | read-only | mandatory | The IP Address of the Mobile Node. |
| 1.3.6.1.4.1.529.24.16.1.9 | ColumnatmpMnNetmask | read-only | mandatory | The netmask of the Mobile Node. |
| 1.3.6.1.4.1.529.24.16.1.10 | ColumnatmpMnIpxNetAddress | read-only | mandatory | The IPX network address of the Mobile Node. |
| 1.3.6.1.4.1.529.24.16.1.11 | ColumnatmpMnIpxNodeAddress | read-only | mandatory | The IPX node address of the Mobile Node. |
| 1.3.6.1.4.1.529.24.16.1.12 | ColumnatmpHNProfileName | read-only | mandatory | The name of the home network profile which will be used to forward all packets received by the HA. This may be NULL if the HA is in router mode. |
| 1.3.6.1.4.1.529.24.16.1.13 | ColumnatmpHNMaxTunnels | read-only | mandatory | The maximum number of tunnels allowed to this HN. |
| 1.3.6.1.4.1.529.24.16.1.14 | ColumnatmpFAPrimaryHAAddress | read-only | mandatory | The Address of the Primary HA. This is known on the FA and will be NULL if the tunnel is on the HA. |
| 1.3.6.1.4.1.529.24.16.1.15 | ColumnatmpFASecondaryHAAddress | read-only | mandatory | The Address of the secondary HA. This is known only on the FA and will be NULL if the tunnel is on the HA. |
| 1.3.6.1.4.1.529.24.16.1.16 | ColumnatmpFASsnStatusIndex | read-only | mandatory | The session status entry index. This is used to tie in the tunnel with a mobile node. It is the same as ssnStatusIndex. This is only known on the FA and will b… |
| 1.3.6.1.4.1.529.24.16.1.17 | ColumnatmpFAUserName | read-only | mandatory | The name of the mobile node. This is only known on the FA and will be NULL if the tunnel is on the HA. |
| 1.3.6.1.4.1.529.24.16.1.18 | ColumnatmpInPkts | read-only | mandatory | The number of packets received on this tunnel from the peer Agent. Not valid for tunnels in local client mode. |
| 1.3.6.1.4.1.529.24.16.1.19 | ColumnatmpInOctets | read-only | mandatory | The number of octets received on this tunnel from the peer Agent. Not valid for tunnels in local client mode. |
| 1.3.6.1.4.1.529.24.16.1.20 | ColumnatmpInErrPkts | read-only | mandatory | The number of packets received on this tunnel from the peer Agent that were dropped. Not valid for tunnels in local client mode. |
| 1.3.6.1.4.1.529.24.16.1.21 | ColumnatmpOutPkts | read-only | mandatory | The number of packets sent on this tunnel to the peer Agent. Not valid for tunnels in local client mode. |
| 1.3.6.1.4.1.529.24.16.1.22 | ColumnatmpOutOctets | read-only | mandatory | The number of octets sent on this tunnel to the peer Agent. Not valid for tunnels in local client mode. |
| 1.3.6.1.4.1.529.24.16.1.23 | ColumnatmpOutErrPkts | read-only | mandatory | The number of packets dropped on this tunnel before sending to peer Agent. Not valid for tunnels in local client mode. |
| 1.3.6.1.4.1.529.24.16.1.24 | ColumnatmpPktsForcedToFragment | read-only | mandatory | The number of packets forced to pre-fragment despite the DF bit. Not valid for tunnels in local client mode. |
| 1.3.6.1.4.1.529.24.16.1.25 | ColumnatmpPktsFailedFragment | read-only | mandatory | The number of packets that required to be fragmented but were dropped because atmpAgentForceFragemtnation was disable and the DF bit was set. Not valid for tun… |