ASCEND-HDSL2-MIB
37 objects
No module-level DESCRIPTION found.
Imported Objects
| ASCEND-WAN-MIB | wanTypeHdsl2 |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.4.12.1 | Tablehdsl2LineStatusTable | not-accessible | mandatory | HDSL2 status parameters. |
| 1.3.6.1.4.1.529.4.12.1.1 | Rowhdsl2LineStatusEntry | not-accessible | mandatory | A interface status entry containing objects to describe the interface. |
| 1.3.6.1.4.1.529.4.12.1.1.1 | Columnhdsl2StatusIfEntryIndex | read-only | mandatory | Interface group index assigned to this port. |
| 1.3.6.1.4.1.529.4.12.1.1.2 | Columnhdsl2StatusShelfIndex | read-only | mandatory | TNT's HDSL2 modules Shelf ID. |
| 1.3.6.1.4.1.529.4.12.1.1.3 | Columnhdsl2StatusSlotIndex | read-only | mandatory | TNT's HDSL2 modules Slot ID. |
| 1.3.6.1.4.1.529.4.12.1.1.4 | Columnhdsl2StatusLineIndex | read-only | mandatory | HDSL2 modules line ID. |
| 1.3.6.1.4.1.529.4.12.1.1.5 | Columnhdsl2StatusUnitType | read-only | mandatory | Unit type defines if the unit is operating either as a Central Office Equipment (COE) or Customer Premiss equipment (CPE). |
| 1.3.6.1.4.1.529.4.12.1.1.6 | Columnhdsl2StatusLineState | read-only | mandatory | Interface state describes the current ports operating state. States are: Config, Pend Down, Up, Down, Start-up, or N/A. |
| 1.3.6.1.4.1.529.4.12.1.1.7 | Columnhdsl2StatusOpRate | read-write | mandatory | The current symetrical operation rate |
| 1.3.6.1.4.1.529.4.12.1.1.8 | Columnhdsl2StatusVendorId | read-only | mandatory | Vendor identification. |
| 1.3.6.1.4.1.529.4.12.1.1.9 | Columnhdsl2StatusMajorFirmWareVer | read-only | mandatory | Major firmware version. |
| 1.3.6.1.4.1.529.4.12.1.1.10 | Columnhdsl2StatusMinorFirmWareVer | read-only | mandatory | Minor firmware version. |
| 1.3.6.1.4.1.529.4.12.1.1.11 | Columnhdsl2StatusHardWareVer | read-only | mandatory | Hardware version. |
| 1.3.6.1.4.1.529.4.12.2 | Tablehdsl2LineStatisticTable | not-accessible | mandatory | HDSL2 statistical parameters. |
| 1.3.6.1.4.1.529.4.12.2.1 | Rowhdsl2LineStatisticEntry | not-accessible | mandatory | A interface statistical entry containing objects to describe the interface. |
| 1.3.6.1.4.1.529.4.12.2.1.1 | Columnhdsl2StatIfEntryIndex | read-only | mandatory | The interface groups interface index is used to index into this table. |
| 1.3.6.1.4.1.529.4.12.2.1.2 | Columnhdsl2StatShelfIndex | read-only | mandatory | HDSL2 modules Shelf ID. |
| 1.3.6.1.4.1.529.4.12.2.1.3 | Columnhdsl2StatSlotIndex | read-only | mandatory | HDSL2 modules Slot ID. |
| 1.3.6.1.4.1.529.4.12.2.1.4 | Columnhdsl2StatLineIndex | read-only | mandatory | HDSL2 modules interface ID. |
| 1.3.6.1.4.1.529.4.12.2.1.5 | Columnhdsl2StatConnUpDays | read-only | mandatory | Connection up day count. |
| 1.3.6.1.4.1.529.4.12.2.1.6 | Columnhdsl2StatConnUpHours | read-only | mandatory | Connection Up 24 hour count. |
| 1.3.6.1.4.1.529.4.12.2.1.7 | Columnhdsl2StatConnUpMinutes | read-only | mandatory | Connection up minute count. |
| 1.3.6.1.4.1.529.4.12.2.1.8 | Columnhdsl2StatRxSignalPresent | read-only | mandatory | Receive signal present detection. |
| 1.3.6.1.4.1.529.4.12.2.1.9 | Columnhdsl2StatLineQualityDb | read-only | mandatory | Lines noise margin. Reliable data will transfer with a reading of ??? or greater. |
| 1.3.6.1.4.1.529.4.12.2.1.10 | Columnhdsl2StatUpDwnCntr | read-only | mandatory | Line Up Down counter value displays the number of times the interface transitions from a down to up state. |
| 1.3.6.1.4.1.529.4.12.2.1.11 | Columnhdsl2StatLineSelfTest | read-only | mandatory | Line hardware self test results (Passed or Failed). |
| 1.3.6.1.4.1.529.4.12.2.1.12 | Columnhdsl2StatTxPower | read-only | mandatory | Lines transmit power. |
| 1.3.6.1.4.1.529.4.12.2.1.13 | Columnhdsl2StatFramerCrcErrors | read-only | mandatory | Lines framer CRC errors. |
| 1.3.6.1.4.1.529.4.12.2.1.14 | Columnhdsl2StatFramerSyncStatus | read-only | mandatory | Lines framer sync status . |
| 1.3.6.1.4.1.529.4.12.2.1.15 | Columnhdsl2StatFramerLosdCnt | read-only | mandatory | Lines framer ???. |
| 1.3.6.1.4.1.529.4.12.2.1.16 | Columnhdsl2StatFramerSegaCnt | read-only | mandatory | Lines framer ???. |
| 1.3.6.1.4.1.529.4.12.2.1.17 | Columnhdsl2StatFramerSegdCnt | read-only | mandatory | Lines framer ???. |
| 1.3.6.1.4.1.529.4.12.2.1.18 | Columnhdsl2StatFramerRxHecErrors | read-only | mandatory | Lines framer ???. |
| 1.3.6.1.4.1.529.4.12.2.1.19 | Columnhdsl2StatBertTimer | read-write | mandatory | BER test duration configuration. The BER test lasts for the duration of this timer. |
| 1.3.6.1.4.1.529.4.12.2.1.20 | Columnhdsl2StatBertEna | read-write | mandatory | Enable/disable of the BER test. If nodes are connected, then the BER test is ran between the units. If this node is not connected to a remote node, then the in… |
| 1.3.6.1.4.1.529.4.12.2.1.21 | Columnhdsl2StatBertState | read-only | mandatory | BER test states. When this node is not connected to another node, the test is disabled. When two nodes are connected then the BER test waits for the other node… |
| 1.3.6.1.4.1.529.4.12.2.1.22 | Columnhdsl2StatBertErrorCounter | read-only | mandatory | BER test bit error counter. |