ASCEND-LANMODEM-MIB
86 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.2.5 | TableslotMdmTable | not-accessible | mandatory | A list of mdmIndex and the slot/item entry that the mdmIndex is associated with. |
| 1.3.6.1.4.1.529.2.5.1 | RowslotMdmEntry | not-accessible | mandatory | A slot interface entry containing the slot and item that the mdmIndex is associated with. |
| 1.3.6.1.4.1.529.2.5.1.1 | ColumnslotMdmIndex | read-only | mandatory | The mdmIndex, ranging from 1 to the number of modems specified in the RFC1696 variable mdmNumber. The mdmIndex identified by a particular value of this index i… |
| 1.3.6.1.4.1.529.2.5.1.2 | ColumnslotMdmSlotIndex | read-only | mandatory | The slot index, ranging from 0 to the number of slots specified in slotNumber. |
| 1.3.6.1.4.1.529.2.5.1.3 | ColumnslotMdmItemIndex | read-only | mandatory | The item index, ranging from 1 to the number of items (modems) supported on the slot indicated by slotMdmSlotIndex. |
| 1.3.6.1.4.1.529.2.5.1.4 | ColumnslotMdmItemStatus | read-only | mandatory | The status of the modem. |
| 1.3.6.1.4.1.529.2.5.1.5 | ColumnslotMdmItemStatusChar | read-only | mandatory | The status of the modem as displayed in the menu system. |
| 1.3.6.1.4.1.529.2.5.1.6 | ColumnslotMdmItemConfig | read-write | mandatory | The modem configuration state. SETs are allowed only if the corresponding modem slot card is enabled. |
| 1.3.6.1.4.1.529.15.1 | ScalaravailLanModem | read-only | mandatory | The number of lan modems in the availLanModemTable. |
| 1.3.6.1.4.1.529.15.2 | TableavailLanModemTable | not-accessible | mandatory | The lan modems in this table are used for answering or placing calls. This table is searched before the suspectLanModemTable. |
| 1.3.6.1.4.1.529.15.2.1 | RowavailLanModemEntry | not-accessible | mandatory | The properties associated with the entries in the availLanModemTable. |
| 1.3.6.1.4.1.529.15.2.1.1 | ColumnavailLanModemSlotIndex | read-only | mandatory | The slot number corresponding to the lan modem. |
| 1.3.6.1.4.1.529.15.2.1.2 | ColumnavailLanModemPortIndex | read-only | mandatory | The port number corresponding to the lan modem. |
| 1.3.6.1.4.1.529.15.2.1.3 | ColumnavailLanModemUsedCount | read-only | mandatory | The number of times the lan modem was utilized. |
| 1.3.6.1.4.1.529.15.2.1.4 | ColumnavailLanModemBadCount | read-only | mandatory | The number of times the lan modem failed. |
| 1.3.6.1.4.1.529.15.2.1.5 | ColumnavailLanModemLast32 | read-only | mandatory | A 32-bit mask of the last 32 times the lan modem was tried. A '0' in the bit position indicates failure while a '1' indicates success. |
| 1.3.6.1.4.1.529.15.3 | ScalarsuspectLanModem | read-only | mandatory | The number of lan modems in the suspectLanModemTable. |
| 1.3.6.1.4.1.529.15.4 | TablesuspectLanModemTable | not-accessible | mandatory | The lan modems in the suspectLanModemTable are tried after the availLanModemTable is exhausted. |
| 1.3.6.1.4.1.529.15.4.1 | RowsuspectLanModemEntry | not-accessible | mandatory | The properties associated with the entries in the suspectLanModemTable. |
| 1.3.6.1.4.1.529.15.4.1.1 | ColumnsuspectLanModemSlotIndex | read-only | mandatory | The slot number corresponding to the lan modem. |
| 1.3.6.1.4.1.529.15.4.1.2 | ColumnsuspectLanModemPortIndex | read-only | mandatory | The port number corresponding to the lan modem. |
| 1.3.6.1.4.1.529.15.4.1.3 | ColumnsuspectLanModemUsedCount | read-only | mandatory | The number of times the lan modem was utilized. |
| 1.3.6.1.4.1.529.15.4.1.4 | ColumnsuspectLanModemBadCount | read-only | mandatory | The number of times the lan modem failed. |
| 1.3.6.1.4.1.529.15.4.1.5 | ColumnsuspectLanModemLast32 | read-only | mandatory | A 32-bit mask of the last 32 times the lan modem was tried. A '0' in the bit position indicates failure while a '1' indicates success. |
| 1.3.6.1.4.1.529.15.5 | ScalardisabledLanModem | read-only | mandatory | The number of lan modems in the disabledLanModemTable. |
| 1.3.6.1.4.1.529.15.6 | TabledisabledLanModemTable | not-accessible | mandatory | The table of lan modems disabled using the console. |
| 1.3.6.1.4.1.529.15.6.1 | RowdisabledLanModemEntry | not-accessible | mandatory | The properties associated with the entries in the disabledLanModemTable. |
| 1.3.6.1.4.1.529.15.6.1.1 | ColumndisabledLanModemSlotIndex | read-only | mandatory | The slot number corresponding to the lan modem. |
| 1.3.6.1.4.1.529.15.6.1.2 | ColumndisabledLanModemPortIndex | read-only | mandatory | The port number corresponding to the lan modem. |
| 1.3.6.1.4.1.529.15.6.1.3 | ColumndisabledLanModemUsedCount | read-only | mandatory | The number of times the lan modem was utilized. |
| 1.3.6.1.4.1.529.15.6.1.4 | ColumndisabledLanModemBadCount | read-only | mandatory | The number of times the lan modem failed. |
| 1.3.6.1.4.1.529.15.6.1.5 | ColumndisabledLanModemLast32 | read-only | mandatory | A 32-bit mask of the last 32 times the lan modem was tried. A '0' in the bit position indicates failure while a '1' indicates success. |
| 1.3.6.1.4.1.529.15.7 | ScalardeadLanModem | read-only | mandatory | The number of lan modems in the deadLanModemTable. |
| 1.3.6.1.4.1.529.15.8 | TabledeadLanModemTable | not-accessible | mandatory | The table of lan modems which are considered as dead. |
| 1.3.6.1.4.1.529.15.8.1 | RowdeadLanModemEntry | not-accessible | mandatory | The properties associated with the entries in the deadLanModemTable. |
| 1.3.6.1.4.1.529.15.8.1.1 | ColumndeadLanModemSlotIndex | read-only | mandatory | The slot number corresponding to the lan modem. |
| 1.3.6.1.4.1.529.15.8.1.2 | ColumndeadLanModemPortIndex | read-only | mandatory | The port number corresponding to the lan modem. |
| 1.3.6.1.4.1.529.15.8.1.3 | ColumndeadLanModemState | read-only | mandatory | The reason for the lan modem to be place in the deadLanModemTable. |
| 1.3.6.1.4.1.529.15.9 | ScalarbusyLanModem | read-only | mandatory | The number of lan modems in the busyLanModemTable. |
| 1.3.6.1.4.1.529.15.10 | TablebusyLanModemTable | not-accessible | mandatory | The lan modems in this table are busy answering or placing calls. |
| 1.3.6.1.4.1.529.15.10.1 | RowbusyLanModemEntry | not-accessible | mandatory | The properties associated with the entries in the busyLanModemTable. |
| 1.3.6.1.4.1.529.15.10.1.1 | ColumnbusyLanModemSlotIndex | read-only | mandatory | The slot number corresponding to the lan modem. |
| 1.3.6.1.4.1.529.15.10.1.2 | ColumnbusyLanModemPortIndex | read-only | mandatory | The port number corresponding to the lan modem. |
| 1.3.6.1.4.1.529.15.10.1.3 | ColumnbusyLanModemUsedCount | read-only | mandatory | The number of times the lan modem was utilized. |
| 1.3.6.1.4.1.529.15.10.1.4 | ColumnbusyLanModemBadCount | read-only | mandatory | The number of times the lan modem failed. |
| 1.3.6.1.4.1.529.15.10.1.5 | ColumnbusyLanModemLast32 | read-only | mandatory | A 32-bit mask of the last 32 times the lan modem was tried. A '0' in the bit position indicates failure while a '1' indicates success. |
| 1.3.6.1.4.1.529.15.10.1.6 | ColumnbusyDirection | read-only | mandatory | Distinguishes incoming from outgoing calls. |
| 1.3.6.1.4.1.529.15.11 | ScalarsuspectTrapState | read-write | mandatory | This variable indicates whether the system produces the lanModemMovedToSuspectList trap. It will be automatically enabled after restart. |
| 1.3.6.1.4.1.529.15.12 | ScalarcsmLanMdmDiagAdminStatus | read-write | mandatory | The administrative status of CSM modem diag table. The value 'enabled' enables csmLanModemDiagTable and 'disabled' stops csmLanModemDiagTable from continuing c… |
| 1.3.6.1.4.1.529.15.13 | ScalarcsmLanMdmDiagMaxNumberOfDiagEntries | read-only | mandatory | The maximum number of CSM diag entries that can exist in the csmLanMdmDiagTable. A value of zero (0) indicates there is no CSM modem exist in the system or the… |
| 1.3.6.1.4.1.529.15.14 | ScalarcsmLanMdmDiagFirstIndexNumber | read-only | mandatory | The first index number currently in csmLanMdmDiagTable. This value will be 0 until the first call occurs. |
| 1.3.6.1.4.1.529.15.15 | ScalarcsmLanMdmDiagLastIndexNumber | read-only | mandatory | The last index number currently in csmLanMdmDiagTable. |
| 1.3.6.1.4.1.529.15.16 | TablecsmLanMdmDiagTable | not-accessible | mandatory | Lan modem diagnostic table for Ascend CSM-1 and CSM-3 modem cards only. |
| 1.3.6.1.4.1.529.15.16.1 | RowcsmLanMdmDiagEntry | not-accessible | mandatory | The properties associated with the entries in the csmLanMdmDiagTable. |
| 1.3.6.1.4.1.529.15.16.1.1 | ColumncsmLanMdmDiagIndexNumber | read-only | mandatory | A unique number assigned to every diag entry. Numbers are assigned incrementally starting with 1 and will wraparound if the upper limit (2147483648) is reached… |
| 1.3.6.1.4.1.529.15.16.1.2 | ColumncsmLanMdmDiagCallReferenceNum | read-only | mandatory | A unique number assigned to identify a particular session. It is identical to the eventCallReferenceNum in the eventTable. |
| 1.3.6.1.4.1.529.15.16.1.3 | ColumncsmLanMdmDiagSlotIndex | read-only | mandatory | The slot number corresponding to this modem call. |
| 1.3.6.1.4.1.529.15.16.1.4 | ColumncsmLanMdmDiagPortIndex | read-only | mandatory | The port number corresponding to this modem call. |
| 1.3.6.1.4.1.529.15.16.1.5 | ColumncsmLanMdmDiagCurrentXmitRate | read-only | mandatory | The current link transmit rate of a modem connection. Rate is given as bit-per-second. |
| 1.3.6.1.4.1.529.15.16.1.6 | ColumncsmLanMdmDiagMinXmitRate | read-only | mandatory | The minimum link transmit rate of a modem connection. Rate is given as bit-per-second. |
| 1.3.6.1.4.1.529.15.16.1.7 | ColumncsmLanMdmDiagMaxXmitRate | read-only | mandatory | The maximum link transmit rate of a modem connection. Rate is given as bit-per-second. |
| 1.3.6.1.4.1.529.15.16.1.8 | ColumncsmLanMdmDiagCurrentRecvRate | read-only | mandatory | The current link receive rate of a modem connection. Rate is given as bit-per-second. |
| 1.3.6.1.4.1.529.15.16.1.9 | ColumncsmLanMdmDiagMinRcvRate | read-only | mandatory | The minimum link receive rate of a modem connection. Rate is given as bit-per-second. |
| 1.3.6.1.4.1.529.15.16.1.10 | ColumncsmLanMdmDiagMaxRcvRate | read-only | mandatory | The maximum link receive rate of a modem connection. Rate is given as bit-per-second. |
| 1.3.6.1.4.1.529.15.16.1.11 | ColumncsmLanMdmDiagProtocol | read-only | mandatory | Error correction protocol used by a modem connection. |
| 1.3.6.1.4.1.529.15.16.1.12 | ColumncsmLanMdmDiagCompression | read-only | mandatory | Data compression used by a modem connection. |
| 1.3.6.1.4.1.529.15.16.1.13 | ColumncsmLanMdmDiagModulation | read-only | mandatory | The modulation scheme of the current modem connection. |
| 1.3.6.1.4.1.529.15.16.1.14 | ColumncsmLanMdmDiagSymbolRate | read-only | mandatory | The symbol rate of a connected modem . This field applies only to V.34, K56flex and V.90 connections. |
| 1.3.6.1.4.1.529.15.16.1.15 | ColumncsmLanMdmDiagCurrentRcvLevel | read-only | mandatory | The receive level of the current modem connection. The value given is in negative dBs. |
| 1.3.6.1.4.1.529.15.16.1.16 | ColumncsmLanMdmDiagCurrentXmitLevel | read-only | mandatory | The transmit level of the current modem connection. The value given is in negative dBs. |
| 1.3.6.1.4.1.529.15.16.1.17 | ColumncsmLanMdmDiagCurrentLineQuality | read-only | mandatory | The line quality of a modem connection. |
| 1.3.6.1.4.1.529.15.16.1.18 | ColumncsmLanMdmDiagCurrentSNR | read-only | mandatory | The SNR value obtained during a modem connection. |
| 1.3.6.1.4.1.529.15.16.1.19 | ColumncsmLanMdmDiagSNRMinimum | read-only | mandatory | The minimum SNR value obtained during a modem connection. |
| 1.3.6.1.4.1.529.15.16.1.20 | ColumncsmLanMdmDiagSNRMaximum | read-only | mandatory | The maximum SNR value obtained during a modem connection. |
| 1.3.6.1.4.1.529.15.16.1.21 | ColumncsmLanMdmDiagLocalRetrainRequested | read-only | mandatory | The number of retrains requested by this modem during this session. |
| 1.3.6.1.4.1.529.15.16.1.22 | ColumncsmLanMdmDiagRemoteRetrainRequested | read-only | mandatory | The number of retrains requested by remote modem during this session. |
| 1.3.6.1.4.1.529.15.16.1.23 | ColumncsmLanMdmDiagHighestSPXRcvState | read-only | mandatory | The highest SPX receive state reached for a modem. |
| 1.3.6.1.4.1.529.15.16.1.24 | ColumncsmLanMdmDiagHighestSPXTxState | read-only | mandatory | The highest SPX transmit state reached for a modem. |
| 1.3.6.1.4.1.529.15.16.1.25 | ColumncsmLanMdmDiagNonlinearEncode | read-only | mandatory | Non-linear encoing is on or off during a modem connection. |
| 1.3.6.1.4.1.529.15.16.1.26 | ColumncsmLanMdmDiagPrecode | read-only | mandatory | Modem precoding is on or off during a modem connection. |
| 1.3.6.1.4.1.529.15.16.1.27 | ColumncsmLanMdmDiagShaping | read-only | mandatory | Modem shaping is on or off during a modem connection. |
| 1.3.6.1.4.1.529.15.16.1.28 | ColumncsmLanMdmDiagConnectionTime | read-only | mandatory | Total connected time of this modem connection. The value given is in seconds. |
| 1.3.6.1.4.1.529.15.16.1.29 | ColumncsmLanMdmDiagDisconnectReason | read-only | mandatory | The object describes the reason for disconnection. |
| 1.3.6.1.4.1.529.15.16.1.30 | ColumncsmLanMdmDiagRetrainReason | read-only | mandatory | This object shows where the last request for a retrain or rate renegotiation originated from. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| ModemSpeedType | INTEGER { baud300(1), baud600(2), baud1200(3), baud2400(4), baud4800(5), baud9600(6), baud12000(7), baud14400(8), baud7200(9), baud16800(10), baud19200(11), baud21600(12), baud24000(13), baud26400(14), baud28800(15), baud31200(16), baud33600(17), baud32000(18), baud34000(19), baud36000(20), baud38000(21), baud40000(22), baud42000(23), baud44000(24), baud46000(25), baud48000(26), baud50000(27), baud52000(28), baud54000(29), baud56000(30), baud28000(31), baud29333(32), baud30667(33), baud33333(34), baud34667(35), baud37333(36), baud38667(37), baud41333(38), baud42667(39), baud45333(40), baud46667(41), baud49333(42), baud50667(43), baud53333(44), baud54667(45) } |