ASCEND-MIBATMSIG-MIB
49 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.52 | NodemibatmIntfSigParams | |||
| 1.3.6.1.4.1.529.23.52.1 | TablemibatmIntfSigParamsTable | not-accessible | mandatory | A list of mibatmIntfSigParams profile entries. |
| 1.3.6.1.4.1.529.23.52.1.1 | RowmibatmIntfSigParamsEntry | not-accessible | mandatory | A mibatmIntfSigParams entry containing objects that maps to the parameters of mibatmIntfSigParams profile. |
| 1.3.6.1.4.1.529.23.52.1.1.1 | ColumnatmIntfSigParams-Shelf-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.52.1.1.2 | ColumnatmIntfSigParams-Slot-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.52.1.1.3 | ColumnatmIntfSigParams-Item-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.52.1.1.4 | ColumnatmIntfSigParams-LogicalItem-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.52.1.1.5 | ColumnatmIntfSigParams-Address-PhysicalAddress-Shelf | read-write | mandatory | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.52.1.1.6 | ColumnatmIntfSigParams-Address-PhysicalAddress-Slot | read-write | mandatory | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.52.1.1.7 | ColumnatmIntfSigParams-Address-PhysicalAddress-ItemNumber | read-write | mandatory | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.52.1.1.8 | ColumnatmIntfSigParams-Address-LogicalItem | read-write | mandatory | A number that specifies an addressable logical entity within the context of a physical address. |
| 1.3.6.1.4.1.529.23.52.1.1.9 | ColumnatmIntfSigParams-Q2931Options-MaxRestart | read-write | mandatory | Maximum number of unacknowledged tx RESTART. |
| 1.3.6.1.4.1.529.23.52.1.1.10 | ColumnatmIntfSigParams-Q2931Options-MaxStatenq | read-write | mandatory | Maximum number of unacknowledged tx STATUS ENQ. |
| 1.3.6.1.4.1.529.23.52.1.1.11 | ColumnatmIntfSigParams-Q2931Options-T301Ms | read-write | mandatory | Timer (in msec) for alerting supervision function. This timer is started on receipt of ALERT in Call received/delivered state and stopped when CONNECT is recei… |
| 1.3.6.1.4.1.529.23.52.1.1.12 | ColumnatmIntfSigParams-Q2931Options-T303Ms | read-write | mandatory | Timer (in msec) for a response after SETUP is sent. This timer is stopped when the CONNECT, CALL PROCEEDING, or RELEASE COMPLETE is received. |
| 1.3.6.1.4.1.529.23.52.1.1.13 | ColumnatmIntfSigParams-Q2931Options-T306Ms | read-write | mandatory | Timer (in msec) for a RELEASE_COMPLETE to be received after a release has been sent. |
| 1.3.6.1.4.1.529.23.52.1.1.14 | ColumnatmIntfSigParams-Q2931Options-T308Ms | read-write | mandatory | Timer (in msec) for a response after RELEASE is sent. This is a release indication timer. This timer is started when the RELEASE message is sent and normally i… |
| 1.3.6.1.4.1.529.23.52.1.1.15 | ColumnatmIntfSigParams-Q2931Options-T309Ms | read-write | mandatory | Timer (in msec) for Q.SAAL to reconnect. After this time, calls are dropped. When set to 0, a default value based on an ATM signaling protocol will be used. |
| 1.3.6.1.4.1.529.23.52.1.1.16 | ColumnatmIntfSigParams-Q2931Options-T310Ms | read-write | mandatory | Timer (in msec) for a response after SETUP is received. Also called the CALL PROCEEDING timer. |
| 1.3.6.1.4.1.529.23.52.1.1.17 | ColumnatmIntfSigParams-Q2931Options-T313Ms | read-write | mandatory | Timer (in msec) for a response after CONNECT is sent. Also called the connect request timer. It is started when the CONNECT is sent and stopped when the CONNEC… |
| 1.3.6.1.4.1.529.23.52.1.1.18 | ColumnatmIntfSigParams-Q2931Options-T316Ms | read-write | mandatory | Timer (in msec) for a response after RESTART is sent. Also called the restart request timer. It is started when the RESTART is sent and stopped when the RESTAR… |
| 1.3.6.1.4.1.529.23.52.1.1.19 | ColumnatmIntfSigParams-Q2931Options-T317Ms | read-write | mandatory | Timer (in msec) for internal clearing of call references. This timer is started as a result of a restart and cleared when all the internal call references are … |
| 1.3.6.1.4.1.529.23.52.1.1.20 | ColumnatmIntfSigParams-Q2931Options-T322Ms | read-write | mandatory | Timer (in msec) for a response after STATUS ENQ is sent. |
| 1.3.6.1.4.1.529.23.52.1.1.21 | ColumnatmIntfSigParams-Q2931Options-T331Ms | read-write | mandatory | Timer (in msec) for internal clearing of call references. |
| 1.3.6.1.4.1.529.23.52.1.1.22 | ColumnatmIntfSigParams-Q2931Options-T333Ms | read-write | mandatory | Timer (in msec) for internal clearing of call references. |
| 1.3.6.1.4.1.529.23.52.1.1.23 | ColumnatmIntfSigParams-Q2931Options-T397Ms | read-write | mandatory | Timer (in msec) for internal clearing of call references. |
| 1.3.6.1.4.1.529.23.52.1.1.24 | ColumnatmIntfSigParams-Q2931Options-T398Ms | read-write | mandatory | Timer (in msec) for receipt of a response to a DROP PARTY that was sent. |
| 1.3.6.1.4.1.529.23.52.1.1.25 | ColumnatmIntfSigParams-Q2931Options-T399Ms | read-write | mandatory | Timer (in msec) for receipt of a response to an ADD PARTY that was sent. |
| 1.3.6.1.4.1.529.23.52.1.1.26 | ColumnatmIntfSigParams-Q2931Options-SaalRetryMs | read-write | mandatory | Timer value for retrying AAL_ESTABLISH messages. |
| 1.3.6.1.4.1.529.23.52.1.1.27 | ColumnatmIntfSigParams-Q2931Options-T303NumReties | read-write | mandatory | Number of times SETUP could be resent in case of T303 timer expiry. |
| 1.3.6.1.4.1.529.23.52.1.1.28 | ColumnatmIntfSigParams-Q2931Options-T308NumRetries | read-write | mandatory | Number of times RELEASE could be sent in case of T308 timer expiry. |
| 1.3.6.1.4.1.529.23.52.1.1.29 | ColumnatmIntfSigParams-Q2931Options-T316NumRetries | read-write | mandatory | Number of times RESTART could be sent in case RESTART ACK is not received withinn T316 timer expiry. |
| 1.3.6.1.4.1.529.23.52.1.1.30 | ColumnatmIntfSigParams-Q2931Options-T322NumRetries | read-write | mandatory | Number of times STAT ENQ could be sent before a response is received within the T322 timer expiry. |
| 1.3.6.1.4.1.529.23.52.1.1.31 | ColumnatmIntfSigParams-Q2931Options-T331NumRetries | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.52.1.1.32 | ColumnatmIntfSigParams-Q2931Options-AssignVpiVci | read-write | mandatory | In the case of UNI4.0 and PNNI this parameter specifies who assigns the VPI/VCI. TRUE will allow the local stack and FALSE will let the partner stack to assign. |
| 1.3.6.1.4.1.529.23.52.1.1.33 | ColumnatmIntfSigParams-QsaalOptions-WindowSize | read-write | mandatory | Q.SAAL window size |
| 1.3.6.1.4.1.529.23.52.1.1.34 | ColumnatmIntfSigParams-QsaalOptions-MaxCc | read-write | mandatory | Maximum number of control PDU (BGN, END, RESYNC) retransmissions. |
| 1.3.6.1.4.1.529.23.52.1.1.35 | ColumnatmIntfSigParams-QsaalOptions-MaxPd | read-write | mandatory | Maximum number of Sequenced data PDU's between poll. |
| 1.3.6.1.4.1.529.23.52.1.1.36 | ColumnatmIntfSigParams-QsaalOptions-MaxStat | read-write | mandatory | Maximum length of STAT PDU. |
| 1.3.6.1.4.1.529.23.52.1.1.37 | ColumnatmIntfSigParams-QsaalOptions-TccMs | read-write | mandatory | Retry time (in msec) for control PDU's(BGN, END, RESYNC). |
| 1.3.6.1.4.1.529.23.52.1.1.38 | ColumnatmIntfSigParams-QsaalOptions-TpollMs | read-write | mandatory | Poll sent (in msec) when active. When set to 0, a default value based on an ATM signaling protocol will be used. |
| 1.3.6.1.4.1.529.23.52.1.1.39 | ColumnatmIntfSigParams-QsaalOptions-TkeepaliveMs | read-write | mandatory | Poll sent (in msec) when in transient state. When set to 0, a default value based on an ATM signaling protocol will be used. |
| 1.3.6.1.4.1.529.23.52.1.1.40 | ColumnatmIntfSigParams-QsaalOptions-TnoresponseMs | read-write | mandatory | STAT received at least this period(in msec). When set to 0, a default value based on an ATM signaling protocol will be used. |
| 1.3.6.1.4.1.529.23.52.1.1.41 | ColumnatmIntfSigParams-QsaalOptions-TidleMs | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.52.1.1.42 | ColumnatmIntfSigParams-QsaalOptions-PollAfterRetransmission | read-write | mandatory | Specifies after retransmitting PDUs whether a POLL must be sent before sending any further PDUs. |
| 1.3.6.1.4.1.529.23.52.1.1.43 | ColumnatmIntfSigParams-QsaalOptions-RepeatUstat | read-write | mandatory | Specifies whether two USTAT messages should be sent each time it is required to be sent. |
| 1.3.6.1.4.1.529.23.52.1.1.44 | ColumnatmIntfSigParams-QsaalOptions-UstatRspToPoll | read-write | mandatory | Specifies whether a USTAT should be sent in response to a POLL indicating an out of sequence PDU. |
| 1.3.6.1.4.1.529.23.52.1.1.45 | ColumnatmIntfSigParams-Action-o | read-write | mandatory |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |