ASCEND-MIBTS-MIB
92 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.133 | NodemibtermSrvProfile | |||
| 1.3.6.1.4.1.529.23.133.1 | TablemibtermSrvProfileTable | not-accessible | mandatory | A list of mibtermSrvProfile profile entries. |
| 1.3.6.1.4.1.529.23.133.1.1 | RowmibtermSrvProfileEntry | not-accessible | mandatory | A mibtermSrvProfile entry containing objects that maps to the parameters of mibtermSrvProfile profile. |
| 1.3.6.1.4.1.529.23.133.1.1.1 | ColumntermSrvProfile-Index-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.133.1.1.2 | ColumntermSrvProfile-Enabled | read-write | mandatory | Terminal server availability flag. When set to no all terminal server functions are disabled. |
| 1.3.6.1.4.1.529.23.133.1.1.3 | ColumntermSrvProfile-SecurityMode | read-write | mandatory | Indicates the type of terminal server security (if any). |
| 1.3.6.1.4.1.529.23.133.1.1.4 | ColumntermSrvProfile-ModemConfiguration-V42-mnp | read-write | mandatory | Describes the modem error correction mode. Error correction can be required, not used, or optional. |
| 1.3.6.1.4.1.529.23.133.1.1.5 | ColumntermSrvProfile-ModemConfiguration-MaxBaudRate | read-write | mandatory | Describes the maximum connection baud rate the modems should try. |
| 1.3.6.1.4.1.529.23.133.1.1.6 | ColumntermSrvProfile-ModemConfiguration-ModemTransmitLevel | read-write | mandatory | The transmit attenuate level the modems should try. |
| 1.3.6.1.4.1.529.23.133.1.1.7 | ColumntermSrvProfile-ModemConfiguration-CellModeFirst | read-write | mandatory | If yes, the modem attempts cellular connection first - then land connection. If no, land based is attempted first, then cellular. |
| 1.3.6.1.4.1.529.23.133.1.1.8 | ColumntermSrvProfile-ModemConfiguration-CellLevel | read-write | mandatory | The modem cellular communications transmit and receive level. Valid values are -10 db .. -18 db. |
| 1.3.6.1.4.1.529.23.133.1.1.9 | ColumntermSrvProfile-ModemConfiguration-o7Even | read-write | mandatory | If set to yes, all incoming data has its parity bit cleared and all outgoing data is forced to 7 bits with even parity. |
| 1.3.6.1.4.1.529.23.133.1.1.10 | ColumntermSrvProfile-ModemConfiguration-ModemMod | read-write | mandatory | The modulation protocol to be attempted by the modems. |
| 1.3.6.1.4.1.529.23.133.1.1.11 | ColumntermSrvProfile-ModemConfiguration-oATAnswerString | read-write | mandatory | Allows the user to enter any additional AT commands in the modem answer string. |
| 1.3.6.1.4.1.529.23.133.1.1.12 | ColumntermSrvProfile-TerminalModeConfiguration-SilentMode | read-write | mandatory | Don't generate any status messages upon connection. |
| 1.3.6.1.4.1.529.23.133.1.1.13 | ColumntermSrvProfile-TerminalModeConfiguration-ClearScreen | read-write | mandatory | Clear the screen at terminal server startup. |
| 1.3.6.1.4.1.529.23.133.1.1.14 | ColumntermSrvProfile-TerminalModeConfiguration-SystemPassword | read-write | mandatory | Global terminal server system access password. |
| 1.3.6.1.4.1.529.23.133.1.1.15 | ColumntermSrvProfile-TerminalModeConfiguration-Banner | read-write | mandatory | The terminal server login banner. |
| 1.3.6.1.4.1.529.23.133.1.1.16 | ColumntermSrvProfile-TerminalModeConfiguration-LoginPrompt | read-write | mandatory | The string used to prompt for user name when authentication is in use. |
| 1.3.6.1.4.1.529.23.133.1.1.17 | ColumntermSrvProfile-TerminalModeConfiguration-PasswordPrompt | read-write | mandatory | The string used to prompt for password when authentication is in use. |
| 1.3.6.1.4.1.529.23.133.1.1.18 | ColumntermSrvProfile-TerminalModeConfiguration-ThirdLoginPrompt | read-write | mandatory | An optional third prompt for a terminal server login. If this value is null no third prompt is used. |
| 1.3.6.1.4.1.529.23.133.1.1.19 | ColumntermSrvProfile-TerminalModeConfiguration-ThirdPromptSequence | read-write | mandatory | Select where the third prompt should appear in the login sequence: either before or after user name & password. |
| 1.3.6.1.4.1.529.23.133.1.1.20 | ColumntermSrvProfile-TerminalModeConfiguration-Prompt | read-write | mandatory | The current terminal server prompt. |
| 1.3.6.1.4.1.529.23.133.1.1.21 | ColumntermSrvProfile-TerminalModeConfiguration-TerminalType | read-write | mandatory | The default terminal type for telnet and rlogin sessions. |
| 1.3.6.1.4.1.529.23.133.1.1.22 | ColumntermSrvProfile-TerminalModeConfiguration-ClearCall | read-write | mandatory | Select operation when a telnet/rlogin/tcp session terminates. When set to yes, the dial-in session will also terminate. |
| 1.3.6.1.4.1.529.23.133.1.1.23 | ColumntermSrvProfile-TerminalModeConfiguration-BufferChars | read-write | mandatory | Whether to buffer termserv characters or to forward them without buffering. Buffering provides better throughput at a slight increase in latency. |
| 1.3.6.1.4.1.529.23.133.1.1.24 | ColumntermSrvProfile-TerminalModeConfiguration-Ping | read-write | mandatory | Enable/disable the ping command from the terminal server. |
| 1.3.6.1.4.1.529.23.133.1.1.25 | ColumntermSrvProfile-TerminalModeConfiguration-Traceroute | read-write | mandatory | Enable/disable the traceroute command from the terminal server. |
| 1.3.6.1.4.1.529.23.133.1.1.26 | ColumntermSrvProfile-TerminalModeConfiguration-Tcp | read-write | mandatory | Enable/disable the tcp command from the terminal server. |
| 1.3.6.1.4.1.529.23.133.1.1.27 | ColumntermSrvProfile-TerminalModeConfiguration-TsAraEnabled | read-write | mandatory | TRUE if terminal server users are allowed to intiate async ARA sessions. |
| 1.3.6.1.4.1.529.23.133.1.1.28 | ColumntermSrvProfile-TerminalModeConfiguration-RloginOptions-Rlogin | read-write | mandatory | Enable/disable the rlogin command from the terminal server. |
| 1.3.6.1.4.1.529.23.133.1.1.29 | ColumntermSrvProfile-TerminalModeConfiguration-RloginOptions-MaxSourcePort | read-write | mandatory | A highest limit of the port number used by rlogin. For BSD's rlogin, the client source port range is 512 to 1023. |
| 1.3.6.1.4.1.529.23.133.1.1.30 | ColumntermSrvProfile-TerminalModeConfiguration-RloginOptions-MinSourcePort | read-write | mandatory | A lowest limit of the port number used by rlogin. For BSD's rlogin, the client source port range is 512 to 1023. |
| 1.3.6.1.4.1.529.23.133.1.1.31 | ColumntermSrvProfile-TerminalModeConfiguration-TelnetOptions-Telnet | read-write | mandatory | Enable/disable the use of the telnet terminal server command. |
| 1.3.6.1.4.1.529.23.133.1.1.32 | ColumntermSrvProfile-TerminalModeConfiguration-TelnetOptions-TelnetMode | read-write | mandatory | Selects default Telnet mode: ASCII, Binary, or Transparent. |
| 1.3.6.1.4.1.529.23.133.1.1.33 | ColumntermSrvProfile-TerminalModeConfiguration-TelnetOptions-AutoTelnet | read-write | mandatory | If set to 'yes' unknown terminal server commands will be treated as the name of a host to telnet to. |
| 1.3.6.1.4.1.529.23.133.1.1.34 | ColumntermSrvProfile-TerminalModeConfiguration-TelnetOptions-LocalEcho | read-write | mandatory | Defines the default echo mode for telnet sessions. The default mode can be overridded on the command line. |
| 1.3.6.1.4.1.529.23.133.1.1.35 | ColumntermSrvProfile-TerminalModeConfiguration-TelnetOptions-Security | read-write | mandatory | Level of security used to authenticate telnet sessions. |
| 1.3.6.1.4.1.529.23.133.1.1.36 | ColumntermSrvProfile-TerminalModeConfiguration-IpAddMsg | read-write | mandatory | This is a text field that will be printed in front of the IP address in the terminal server when going into PPP. |
| 1.3.6.1.4.1.529.23.133.1.1.37 | ColumntermSrvProfile-TerminalModeConfiguration-PromptFormat | read-write | mandatory | TRUE if the terminal server prompt should interpret \\n. |
| 1.3.6.1.4.1.529.23.133.1.1.38 | ColumntermSrvProfile-TerminalModeConfiguration-IpNetmaskMsg | read-write | mandatory | This is a text field that will be printed in front of the IP Netmask in the terminal server when going into SLIP. |
| 1.3.6.1.4.1.529.23.133.1.1.39 | ColumntermSrvProfile-TerminalModeConfiguration-IpGwAddMsg | read-write | mandatory | This is a text field that will be printed in front of the IP Gateway address in the terminal server when going into SLIP. |
| 1.3.6.1.4.1.529.23.133.1.1.40 | ColumntermSrvProfile-TerminalModeConfiguration-LoginTimeout | read-write | mandatory | The number of seconds to wait at the login prompt for the user to login. A value of 0 disables the timeout. |
| 1.3.6.1.4.1.529.23.133.1.1.41 | ColumntermSrvProfile-TerminalModeConfiguration-PacketizeWaitTime | read-write | mandatory | The number of milliseconds to accumulate modem data in a packet. |
| 1.3.6.1.4.1.529.23.133.1.1.42 | ColumntermSrvProfile-TerminalModeConfiguration-PacketizeChars | read-write | mandatory | The number of characters to accumulate modem data in a packet. |
| 1.3.6.1.4.1.529.23.133.1.1.43 | ColumntermSrvProfile-ImmediateModeOptions-Service | read-write | mandatory | enable/disable immediate mode and specify the service type. Immediate mode is where a user is automatically connected to a remote host using the specified serv… |
| 1.3.6.1.4.1.529.23.133.1.1.44 | ColumntermSrvProfile-ImmediateModeOptions-TelnetHostAuth | read-write | mandatory | Option defines if telnet is started directly bypassing the local authentication process. When enabled, authentication is the responsibility of the telnet host. |
| 1.3.6.1.4.1.529.23.133.1.1.45 | ColumntermSrvProfile-ImmediateModeOptions-Host | read-write | mandatory | Name or IP address or X.121 address of the immediate TELNET, TCP, or X.25/Pad host to connect to. |
| 1.3.6.1.4.1.529.23.133.1.1.46 | ColumntermSrvProfile-ImmediateModeOptions-Port | read-write | mandatory | TCP port to which the TELNET or TCP stream is to be redirected to. |
| 1.3.6.1.4.1.529.23.133.1.1.47 | ColumntermSrvProfile-MenuModeOptions-StartWithMenus | read-write | mandatory | Terminal server interface will start in menu mode when this field is 'yes'. |
| 1.3.6.1.4.1.529.23.133.1.1.48 | ColumntermSrvProfile-MenuModeOptions-ToggleScreen | read-write | mandatory | When enabled, users are able to toggle between menu mode and the normal terminal server command line. |
| 1.3.6.1.4.1.529.23.133.1.1.49 | ColumntermSrvProfile-MenuModeOptions-RemoteConfiguration | read-write | mandatory | When enabled, the text and host addresses that make up the menu will be retrieved from RADIUS (if RADIUS is enabled). |
| 1.3.6.1.4.1.529.23.133.1.1.50 | ColumntermSrvProfile-MenuModeOptions-Text1 | read-write | mandatory | The text to put in the terminal server menu for the first login host when remote configuration isn't available. |
| 1.3.6.1.4.1.529.23.133.1.1.51 | ColumntermSrvProfile-MenuModeOptions-Host1 | read-write | mandatory | The address of the first host to access when terminal server menu mode is being used without remote configuration. |
| 1.3.6.1.4.1.529.23.133.1.1.52 | ColumntermSrvProfile-MenuModeOptions-Service1 | read-write | mandatory | Type of service required for this selection. |
| 1.3.6.1.4.1.529.23.133.1.1.53 | ColumntermSrvProfile-MenuModeOptions-Port1 | read-write | mandatory | The port for contacting host. Used only for telnet service. |
| 1.3.6.1.4.1.529.23.133.1.1.54 | ColumntermSrvProfile-MenuModeOptions-User1 | read-write | mandatory | The user name for this selection. Used only for rlogin service. |
| 1.3.6.1.4.1.529.23.133.1.1.55 | ColumntermSrvProfile-MenuModeOptions-Text2 | read-write | mandatory | The text to put in the terminal server menu for the second login host when remote configuration isn't available. |
| 1.3.6.1.4.1.529.23.133.1.1.56 | ColumntermSrvProfile-MenuModeOptions-Host2 | read-write | mandatory | The address of the second host to access when terminal server menu mode is being used without remote configuration. |
| 1.3.6.1.4.1.529.23.133.1.1.57 | ColumntermSrvProfile-MenuModeOptions-Service2 | read-write | mandatory | Type of service required for this selection. |
| 1.3.6.1.4.1.529.23.133.1.1.58 | ColumntermSrvProfile-MenuModeOptions-Port2 | read-write | mandatory | The port for contacting host. Used only for telnet service. |
| 1.3.6.1.4.1.529.23.133.1.1.59 | ColumntermSrvProfile-MenuModeOptions-User2 | read-write | mandatory | The user name for this selection. Used only for rlogin service. |
| 1.3.6.1.4.1.529.23.133.1.1.60 | ColumntermSrvProfile-MenuModeOptions-Text3 | read-write | mandatory | The text to put in the terminal server menu for the third login host when remote configuration isn't available. |
| 1.3.6.1.4.1.529.23.133.1.1.61 | ColumntermSrvProfile-MenuModeOptions-Host3 | read-write | mandatory | The address of the third host to access when terminal server menu mode is being used without remote configuration. |
| 1.3.6.1.4.1.529.23.133.1.1.62 | ColumntermSrvProfile-MenuModeOptions-Service3 | read-write | mandatory | Type of service required for this selection. |
| 1.3.6.1.4.1.529.23.133.1.1.63 | ColumntermSrvProfile-MenuModeOptions-Port3 | read-write | mandatory | The port for contacting host. Used only for telnet service. |
| 1.3.6.1.4.1.529.23.133.1.1.64 | ColumntermSrvProfile-MenuModeOptions-User3 | read-write | mandatory | The user name for this selection. Used only for rlogin service. |
| 1.3.6.1.4.1.529.23.133.1.1.65 | ColumntermSrvProfile-MenuModeOptions-Text4 | read-write | mandatory | The text to put in the terminal server menu for the forth login host when remote configuration isn't available. |
| 1.3.6.1.4.1.529.23.133.1.1.66 | ColumntermSrvProfile-MenuModeOptions-Host4 | read-write | mandatory | The address of the forth host to access when terminal server menu mode is being used without remote configuration. |
| 1.3.6.1.4.1.529.23.133.1.1.67 | ColumntermSrvProfile-MenuModeOptions-Service4 | read-write | mandatory | Type of service required for this selection. |
| 1.3.6.1.4.1.529.23.133.1.1.68 | ColumntermSrvProfile-MenuModeOptions-Port4 | read-write | mandatory | The port for contacting host. Used only for telnet service. |
| 1.3.6.1.4.1.529.23.133.1.1.69 | ColumntermSrvProfile-MenuModeOptions-User4 | read-write | mandatory | The user name for this selection. Used only for rlogin service. |
| 1.3.6.1.4.1.529.23.133.1.1.70 | ColumntermSrvProfile-MenuModeOptions-MenuSelectionString | read-write | mandatory | The selection string for the menu mode. |
| 1.3.6.1.4.1.529.23.133.1.1.71 | ColumntermSrvProfile-PppModeConfiguration-Ppp | read-write | mandatory | Enable/disable the PPP terminal server command. |
| 1.3.6.1.4.1.529.23.133.1.1.72 | ColumntermSrvProfile-PppModeConfiguration-Delay | read-write | mandatory | The number of seconds to wait for PPP before putting up the login banner and converting to telnet mode. |
| 1.3.6.1.4.1.529.23.133.1.1.73 | ColumntermSrvProfile-PppModeConfiguration-Direct | read-write | mandatory | Option defines if PPP negotiation is started directly after 'PPP' Term Server command is received or, not. When disabled, we wait to receive a PPP packet befor… |
| 1.3.6.1.4.1.529.23.133.1.1.74 | ColumntermSrvProfile-PppModeConfiguration-Info | read-write | mandatory | Enable/Disable the PPP/SLIP start up message. |
| 1.3.6.1.4.1.529.23.133.1.1.75 | ColumntermSrvProfile-SlipModeConfiguration-Slip | read-write | mandatory | Enable/disable the SLIP command from the terminal server. |
| 1.3.6.1.4.1.529.23.133.1.1.76 | ColumntermSrvProfile-SlipModeConfiguration-SlipBootp | read-write | mandatory | Enable/disable the SLIP command from the terminal server. |
| 1.3.6.1.4.1.529.23.133.1.1.77 | ColumntermSrvProfile-SlipModeConfiguration-Info | read-write | mandatory | Level of information displayed in SLIP start up message. |
| 1.3.6.1.4.1.529.23.133.1.1.78 | ColumntermSrvProfile-SlipModeConfiguration-CslipAutoDetect | read-write | mandatory | Enable/disbale auto detecting of SLIP header compression. This feature will try to auto-detect if the caller is using Van Jacobson header compression, and if s… |
| 1.3.6.1.4.1.529.23.133.1.1.79 | ColumntermSrvProfile-DialoutConfiguration-Enabled | read-write | mandatory | Allow/disallow modem outdial from the terminal server. |
| 1.3.6.1.4.1.529.23.133.1.1.80 | ColumntermSrvProfile-DialoutConfiguration-DirectAccess | read-write | mandatory | Allows direct connection to a modem by TELNETing to a configurable modem port. |
| 1.3.6.1.4.1.529.23.133.1.1.81 | ColumntermSrvProfile-DialoutConfiguration-PortForDirectAccess | read-write | mandatory | The telnet port number for direct access to a modem. |
| 1.3.6.1.4.1.529.23.133.1.1.82 | ColumntermSrvProfile-DialoutConfiguration-PasswordForDirectAccess | read-write | mandatory | The password that must be used to gain direct access to a modem |
| 1.3.6.1.4.1.529.23.133.1.1.83 | ColumntermSrvProfile-DialoutConfiguration-SecurityForDirectAccess | read-write | mandatory | The security method used to control direct modem access. |
| 1.3.6.1.4.1.529.23.133.1.1.84 | ColumntermSrvProfile-Action-o | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.133.1.1.85 | ColumntermSrvProfile-ModemConfiguration-ModemOnHoldTimeout | read-write | mandatory | The allowable Modem-on-Hold timeout values. |
| 1.3.6.1.4.1.529.23.133.1.1.86 | ColumntermSrvProfile-ModemConfiguration-QuickConnectEnabled | read-write | mandatory | If set to yes, Quick-Connect will be enabled. |
| 1.3.6.1.4.1.529.23.133.1.1.87 | ColumntermSrvProfile-ModemConfiguration-MaxV92ReceiveBaudRate | read-write | mandatory | The maximum V.92 receive baud rate to be attempted by the modems. |
| 1.3.6.1.4.1.529.23.133.1.1.88 | ColumntermSrvProfile-ModemConfiguration-V44Enabled | read-write | mandatory | If set to yes, allow V.44 compression to be negotiated |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |