ASYNC-MIB
37 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| SCANET-MIB | scanet |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.208.45 | Nodeasync | |||
| 1.3.6.1.4.1.208.45.1 | NodeasyncConfig | |||
| 1.3.6.1.4.1.208.45.1.1 | TableasyncConfigTable | not-accessible | mandatory | A list of configuration entries. Each entry contains the configuration of a PCMCIA interface when this is used with an asynchronous modem. |
| 1.3.6.1.4.1.208.45.1.1.1 | RowasyncConfigEntry | not-accessible | mandatory | Every configuration option available for the PC-Card modem driver. |
| 1.3.6.1.4.1.208.45.1.1.1.1 | ColumnasyncConfigIndex | read-only | mandatory | The ifIndex for the modem interface. |
| 1.3.6.1.4.1.208.45.1.1.1.2 | ColumnasyncConfigDialMode | read-write | mandatory | The dialing mode. Note that the pulse mode may not be compatible with all countries unless advanced country information is setup with the init strings. |
| 1.3.6.1.4.1.208.45.1.1.1.3 | ColumnasyncConfigAutoInit | read-write | mandatory | When auto-init is enabled the modem brand is detected and a predefined init string suited to the modem is used. When auto-init is disabled the user editable in… |
| 1.3.6.1.4.1.208.45.1.1.1.4 | ColumnasyncConfigDialString | read-write | mandatory | The phone number to dial, with special characters to control the dialing, like pauses and waits for new dial tones. The special characters may vary amongst the… |
| 1.3.6.1.4.1.208.45.1.1.1.5 | ColumnasyncConfigInitString1 | read-write | mandatory | The first half of the user-editable init string. The two init strings are combined before use. |
| 1.3.6.1.4.1.208.45.1.1.1.6 | ColumnasyncConfigInitString2 | read-write | mandatory | The second half of the user-editable init string. |
| 1.3.6.1.4.1.208.45.2 | NodeasyncMon | |||
| 1.3.6.1.4.1.208.45.2.1 | TableasyncMonTable | not-accessible | mandatory | A list of monitor entries. Each entry contains the monitorable data of a PCMCIA interface when this is used with an asynchronous modem. |
| 1.3.6.1.4.1.208.45.2.1.1 | RowasyncMonEntry | not-accessible | mandatory | Every value that can be monitored for the PCMCIA interface. |
| 1.3.6.1.4.1.208.45.2.1.1.1 | ColumnasyncMonIndex | read-only | mandatory | The ifIndex for the modem interface. |
| 1.3.6.1.4.1.208.45.2.1.1.2 | ColumnasyncMonMode | read-only | mandatory | The current internal state of the modem driver. |
| 1.3.6.1.4.1.208.45.2.1.1.3 | ColumnasyncMonTransmitFailedErrors | read-only | mandatory | The number of aborted packet transmits due to a disconnect while packets were queued for transmission. |
| 1.3.6.1.4.1.208.45.2.1.1.4 | ColumnasyncMonTransmitCongestions | read-only | mandatory | The number of packet transmissions that failed due to lack of resources. |
| 1.3.6.1.4.1.208.45.2.1.1.5 | ColumnasyncMonReceiveLostEndMarkers | read-only | mandatory | The number of packets discarded because the packet end signature was missing. |
| 1.3.6.1.4.1.208.45.2.1.1.6 | ColumnasyncMonReceiveOverflows | read-only | mandatory | The number of packets discarded due to lack of free receive buffers. |
| 1.3.6.1.4.1.208.45.2.1.1.7 | ColumnasyncMonReceiveStuffingErrors | read-only | mandatory | In data transmissions via an asynchrounous modem, certain characters are reserved for use with the modem, e.g. to indicate the start and end of data packets. I… |
| 1.3.6.1.4.1.208.45.2.1.1.8 | ColumnasyncMonReceiveCRCErrors | read-only | mandatory | The number of packets discarded due to errors in the packet detected using the packet checksum. |
| 1.3.6.1.4.1.208.45.2.1.1.9 | ColumnasyncMonReceiveShortPackets | read-only | mandatory | The number of packets discarded because the packets were shorter than the minimum legal packet length. |
| 1.3.6.1.4.1.208.45.2.1.1.10 | ColumnasyncMonReceiveLongPackets | read-only | mandatory | The number of packets discarded because the packets were larger than the maximum legal packet length. |
| 1.3.6.1.4.1.208.45.2.1.1.11 | ColumnasyncMonReceiveUartOverrunErrors | read-only | mandatory | The number of packets discarded because the incoming data exceeded the receive buffer size in the UART. |
| 1.3.6.1.4.1.208.45.2.1.1.12 | ColumnasyncMonReceiveUartParityErrors | read-only | mandatory | The number of packets discarded because of errors in the packet detected using the parity bit. |
| 1.3.6.1.4.1.208.45.2.1.1.13 | ColumnasyncMonReceiveUartFramingErrors | read-only | mandatory | The number of packets discarded because of errors during receiving the bit stream. |
| 1.3.6.1.4.1.208.45.2.1.1.14 | ColumnasyncMonReceiveUartBreakErrors | read-only | mandatory | The number of packets discarded because of a temporary loss of the received data flow. |
| 1.3.6.1.4.1.208.45.2.1.1.15 | ColumnasyncMonCallDirection | read-only | mandatory | Direction of the current call. |
| 1.3.6.1.4.1.208.45.3 | NodeasyncPcmcia | |||
| 1.3.6.1.4.1.208.45.3.1 | TableasyncPcmciaTable | not-accessible | mandatory | A list of PC-Card (PCMCIA) information entries. Each entry contains the information available from the modems PCMCIA-interface. |
| 1.3.6.1.4.1.208.45.3.1.1 | RowasyncPcmciaEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.208.45.3.1.1.1 | ColumnasyncPcmciaIndex | read-only | mandatory | The ifIndex for the modem interface. |
| 1.3.6.1.4.1.208.45.3.1.1.2 | ColumnasyncPcmciaManufacturerName | read-only | mandatory | The company name of the modem manufacturer. |
| 1.3.6.1.4.1.208.45.3.1.1.3 | ColumnasyncPcmciaProductName | read-only | mandatory | The brand name of the modem. |
| 1.3.6.1.4.1.208.45.3.1.1.4 | ColumnasyncPcmciaProductVersionMajor | read-only | mandatory | The modem hardware major version number. |
| 1.3.6.1.4.1.208.45.3.1.1.5 | ColumnasyncPcmciaProductVersionMinor | read-only | mandatory | The modem hardware minor version number. |
| 1.3.6.1.4.1.208.45.3.1.1.6 | ColumnasyncPcmciaPcmciaSupported | read-only | mandatory | This value is yes when the modem can be used with the router. |