ATI-MIB
225 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| SNMP-REPEATER-MIB | rptrAddrTrackNewLastSrcAddress |
| SNMPv2-SMI | Counter enterprises Gauge IpAddress mib-2 NetworkAddress OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207 | NodealliedTelesyn | |||
| 1.3.6.1.4.1.207.1 | Nodeproducts | |||
| 1.3.6.1.4.1.207.1.1 | Nodebridge | |||
| 1.3.6.1.4.1.207.1.1.1 | NodeatiBridgeagent | |||
| 1.3.6.1.4.1.207.1.1.1.1 | Nodebridgesnmpd | |||
| 1.3.6.1.4.1.207.1.1.1.1.1 | NodeatiBridge | |||
| 1.3.6.1.4.1.207.1.2 | Noderepeater | |||
| 1.3.6.1.4.1.207.1.2.1 | Nodehub3600 | |||
| 1.3.6.1.4.1.207.1.2.10 | Nodehub3100 | |||
| 1.3.6.1.4.1.207.1.2.20 | NodeintruderProtectionTrap | This trap is replaced by atiIntruderProtectionTrap starting from firmware ver 3.0. AT-3100 and TurboStack product families only. This trap is sent when an Intr… | ||
| 1.3.6.1.4.1.207.1.2.21 | NodeatiIntruderProtectionTrap | AT-3100 and TurboStack product families only. This trap is sent when an Intruder Alert occurs on a module/port due to a received packet with an unauthorized so… | ||
| 1.3.6.1.4.1.207.1.2.22 | NodeatiRedundantPortChangeTrap | TurboStack product family only. This trap is sent when ports, which are configured for redundant links, change from primary to secondary or secondary to primar… | ||
| 1.3.6.1.4.1.207.1.2.65 | NodehubTurboStack | |||
| 1.3.6.1.4.1.207.2 | NodefilterTable | |||
| 1.3.6.1.4.1.207.2.1 | TableftConfig | not-accessible | mandatory | Bridge FT operational parameters |
| 1.3.6.1.4.1.207.2.1.1 | RowftMaxAge | read-only | mandatory | Seconds before an unreferenced dynamic FT entry is removed |
| 1.3.6.1.4.1.207.2.1.2 | RowftMaxRemove | read-write | mandatory | Max number table entries removed each time table overflows |
| 1.3.6.1.4.1.207.2.1.3 | RowftMaxFilter | read-only | mandatory | Max number FT entries |
| 1.3.6.1.4.1.207.2.1.4 | RowftAgeTime | read-write | mandatory | Seconds between FT table entries |
| 1.3.6.1.4.1.207.2.1.5 | RowftMaxPerm | read-write | mandatory | Max number of permanent FT entries. May be set to zero which causes all non-system FT entries to be deleted |
| 1.3.6.1.4.1.207.2.1.6 | RowftForwMBcast | read-write | mandatory | Flag indicates if multicast (including broadcast) packets are to be forwarded (1) or discarded (0) |
| 1.3.6.1.4.1.207.2.1.7 | RowftSecureMode | read-write | mandatory | Flag indicates if bridge will learn addresses |
| 1.3.6.1.4.1.207.2.2 | TableftEntry | not-accessible | mandatory | Bridge FT entries each selected by destination address |
| 1.3.6.1.4.1.207.2.2.1 | RowftAge | read-only | mandatory | FT entry age since last referenced in seconds |
| 1.3.6.1.4.1.207.2.2.2 | RowftDisp | read-write | mandatory | FT entry disposition. Can be more than one OR'ed together |
| 1.3.6.1.4.1.207.2.2.91 | RowftAddr | not-accessible | mandatory | destination address (dummy index) |
| 1.3.6.1.4.1.207.3 | ScalarinterfaceErrors | not-accessible | mandatory | Set of Ethernet link level errors |
| 1.3.6.1.4.1.207.3.1 | ScalarifeInBusErr | read-only | mandatory | Number of EtherStar read bus errors that have occurred |
| 1.3.6.1.4.1.207.3.2 | ScalarifeInShortPkt | read-only | mandatory | Number of short packets received |
| 1.3.6.1.4.1.207.3.3 | ScalarifeInAlgError | read-only | mandatory | Number of packets received with alignment errors |
| 1.3.6.1.4.1.207.3.4 | ScalarifeInBadSize | read-only | mandatory | Number of packets received greater than 1518 bytes |
| 1.3.6.1.4.1.207.3.5 | ScalarifeInOverflow | read-only | mandatory | Number of times receive buffer overflowed |
| 1.3.6.1.4.1.207.3.6 | ScalarifeInCRCErr | read-only | mandatory | Number of CRC errors detected |
| 1.3.6.1.4.1.207.3.7 | ScalarifeOutColl16 | read-only | mandatory | Number of packets discarded due to excessive collisions |
| 1.3.6.1.4.1.207.3.8 | ScalarifeOutCol | read-only | mandatory | Number of collisions detected |
| 1.3.6.1.4.1.207.3.9 | ScalarifeOutShortPkt | read-only | mandatory | Number of short packets transmitted |
| 1.3.6.1.4.1.207.3.10 | ScalarifeOutUnderflow | read-only | mandatory | Number of packets transmitted w/programmed length > buffered transmitted data |
| 1.3.6.1.4.1.207.3.11 | ScalarifeOutBusErr | read-only | mandatory | Number of EtherStar write bus errors |
| 1.3.6.1.4.1.207.3.91 | ScalarifePort | not-accessible | mandatory | |
| 1.3.6.1.4.1.207.4 | ScalarforwardCounters | read-only | mandatory | Counters associated with bridge entity |
| 1.3.6.1.4.1.207.4.1 | ScalarfcInOctets | read-only | mandatory | Number bytes received by bridge entity on specified port |
| 1.3.6.1.4.1.207.4.2 | ScalarfcInPkts | read-only | mandatory | Number packets received by bridge entity on specified port |
| 1.3.6.1.4.1.207.4.3 | ScalarfcInNUcastPkts | read-only | mandatory | Number multicast/broadcast packets received by bridge enity on specified port |
| 1.3.6.1.4.1.207.4.4 | ScalarfcForwOctets | read-only | mandatory | Number bytes forwarded by bridge entity onto specified port |
| 1.3.6.1.4.1.207.4.5 | ScalarfcForwPkts | read-only | mandatory | Number of packets forwarded by bridge enity onto specified port |
| 1.3.6.1.4.1.207.4.6 | ScalarfcFiltOctets | read-only | mandatory | Number of bytes received on specified port that were discarded by bridge enity |
| 1.3.6.1.4.1.207.4.7 | ScalarfcFiltPkts | read-only | mandatory | Number of packets dicarded by filtering by bridge enity |
| 1.3.6.1.4.1.207.4.91 | ScalarfcPort | not-accessible | mandatory | |
| 1.3.6.1.4.1.207.5 | ScalarsystemCounters | read-only | mandatory | System operating s/w counters |
| 1.3.6.1.4.1.207.5.1 | ScalarsysMemFree | read-only | mandatory | Number of buffers of a particular size on the memory free list |
| 1.3.6.1.4.1.207.5.2 | ScalarsysMemAllocFail | read-only | mandatory | Number of allocation failures for a particular buffer size |
| 1.3.6.1.4.1.207.5.3 | ScalarsysMemTotAllocFail | read-only | mandatory | Total number of memory allocation failures |
| 1.3.6.1.4.1.207.5.4 | ScalarsysMemAllocTooBig | read-only | mandatory | Number of memory allocation requests that failed |
| 1.3.6.1.4.1.207.5.5 | ScalarsysMemFreeFail | read-only | mandatory | Number of memory free requests that failed |
| 1.3.6.1.4.1.207.5.6 | ScalarsysTimeToReset | read-write | mandatory | Number of seconds unit bridge reset |
| 1.3.6.1.4.1.207.5.7 | ScalarsysPanicMesg | read-only | mandatory | Error message associated with last s/w generated reset |
| 1.3.6.1.4.1.207.5.8 | ScalarsysResetCount | read-only | mandatory | Number of times bridge has been reset other than power on/off |
| 1.3.6.1.4.1.207.6 | NodespanningTree | |||
| 1.3.6.1.4.1.207.6.1 | TablestBridge | not-accessible | mandatory | Bridge specific parameters related to operation of Spanning Tree Protocol |
| 1.3.6.1.4.1.207.6.1.1 | RowstBrName | read-write | mandatory | Comment string denoting the bridge |
| 1.3.6.1.4.1.207.6.1.2 | RowstBrIdent | read-only | mandatory | 802.1 Bridge ID |
| 1.3.6.1.4.1.207.6.1.3 | RowstBrMaxAge | read-write | mandatory | 802.1 Max BPDU Age (sec) for bridge |
| 1.3.6.1.4.1.207.6.1.4 | RowstBrHelloTime | read-write | mandatory | 802.1 Hello Time (sec) for bridge |
| 1.3.6.1.4.1.207.6.1.5 | RowstBrForwDelay | read-write | mandatory | 802.1 Forward Delay Time (sec) for bridge |
| 1.3.6.1.4.1.207.6.1.6 | RowstBrIsRoot | read-only | mandatory | Bridge is root (1=yes 0=no) |
| 1.3.6.1.4.1.207.6.1.7 | RowstBrIsDesig | read-only | mandatory | Flag indicating status of bridge as designated bridge (1=yes 0=no) |
| 1.3.6.1.4.1.207.6.1.8 | RowstBrSpanAddr | read-only | mandatory | MAC address used as Spanning Tree Protocol multicast address |
| 1.3.6.1.4.1.207.6.1.9 | RowstBrPriority | read-write | mandatory | 802.1 bridge priority |
| 1.3.6.1.4.1.207.6.1.10 | RowstBrSTPDisabled | read-write | mandatory | Variable to enable/disable operation of Spanning Tree (1=STP on 0=STP off) |
| 1.3.6.1.4.1.207.6.2 | TablestRoot | not-accessible | mandatory | Parameters related to operation of Spanning Tree Protocol for Root bridge |
| 1.3.6.1.4.1.207.6.2.1 | RowstRtIdent | read-only | mandatory | 802.1 Bridge ID of current Root bridge |
| 1.3.6.1.4.1.207.6.2.2 | RowstRtCost | read-only | mandatory | 802.1 Root Path Cost of current Root bridge |
| 1.3.6.1.4.1.207.6.2.3 | RowstRtPort | read-only | mandatory | Port number of port that provides path to current Root bridge |
| 1.3.6.1.4.1.207.6.2.4 | RowstRtMaxAge | read-only | mandatory | 802.1 Max BPDU Age specified by current known Root bridge |
| 1.3.6.1.4.1.207.6.2.5 | RowstRtHelloTime | read-only | mandatory | 802.1 Hello Time specified by current Root bridge |
| 1.3.6.1.4.1.207.6.2.6 | RowstRtForwDelay | read-only | mandatory | 802.1 Forward Delay specified by current Root bridge |
| 1.3.6.1.4.1.207.6.3 | TablestPort | not-accessible | mandatory | Port specific parameters related to operation of Spanning Tree Protocol |
| 1.3.6.1.4.1.207.6.3.1 | RowstPrtState | read-write | mandatory | 802.1 Port State disable and blocked states |
| 1.3.6.1.4.1.207.6.3.2 | RowstPrtCost | read-write | mandatory | 802.1 Port Path Cost |
| 1.3.6.1.4.1.207.6.3.3 | RowstPrtIsDesig | read-only | mandatory | Status of port as designated port for LAN |
| 1.3.6.1.4.1.207.6.3.4 | RowstPrtIsRoot | read-only | mandatory | Status of port as Root Port |
| 1.3.6.1.4.1.207.6.3.5 | RowstPrtDesigRoot | read-only | mandatory | Bridge ID of Root brigde |
| 1.3.6.1.4.1.207.6.3.6 | RowstPrtDesigCost | read-only | mandatory | Path Cost to Root bridge as advertised by the designated bridge |
| 1.3.6.1.4.1.207.6.3.7 | RowstPrtDesigBridge | read-only | mandatory | Bridge ID of designated bridge |
| 1.3.6.1.4.1.207.6.3.8 | RowstPrtDesigPort | read-only | mandatory | Port ID of designated port |
| 1.3.6.1.4.1.207.6.3.9 | RowstPrtPriority | read-write | mandatory | 802.1 Port Priority |
| 1.3.6.1.4.1.207.6.3.91 | RowstPrtPort | not-accessible | mandatory | |
| 1.3.6.1.4.1.207.6.4 | TablespanTreeStats | read-only | mandatory | Spanning Tree stats on counters |
| 1.3.6.1.4.1.207.6.4.1 | RowstsTopoChanges | read-only | mandatory | Number of topology changes that have occured since power-on |
| 1.3.6.1.4.1.207.6.4.2 | RowstsConfigTimeout | read-only | mandatory | Number of timeouts due to config BPDU not received |
| 1.3.6.1.4.1.207.6.4.3 | RowstsPortDisable | read-only | mandatory | Number of times port has been disabled since power-on |
| 1.3.6.1.4.1.207.6.4.4 | RowstsPortEnable | read-only | mandatory | Number of times port has been enabled since power-on |
| 1.3.6.1.4.1.207.6.4.5 | RowstsInBadLen | read-only | mandatory | Number of STP frames received with bad lenth by this port |
| 1.3.6.1.4.1.207.6.4.6 | RowstsInUnknown | read-only | mandatory | Packets received with bad 802.3 LSAP number by this port |
| 1.3.6.1.4.1.207.6.4.7 | RowstsIn8021Man | read-only | mandatory | Packets received with 802.1 Management LSAP (discarded) |
| 1.3.6.1.4.1.207.6.4.8 | RowstsInConfig | read-only | mandatory | Number of config BPDUs received by this port |
| 1.3.6.1.4.1.207.6.4.9 | RowstsOutConfig | read-only | mandatory | Number of config BPDUs transmitted by this port |
| 1.3.6.1.4.1.207.6.4.10 | RowstsOutTopoChg | read-only | mandatory | Number of Topology Change Notification BPDU transmitted by this port |
| 1.3.6.1.4.1.207.6.4.91 | RowstsPort | not-accessible | mandatory | |
| 1.3.6.1.4.1.207.7 | NodefilterRange | |||
| 1.3.6.1.4.1.207.7.1 | ScalarfrNumRange | read-write | mandatory | The maximum number of filter range table entries when read (GET). Set to zero to delete all filter range table entries. A set with any other value is ignored. |
| 1.3.6.1.4.1.207.7.2 | TablefrEntry | read-write | mandatory | |
| 1.3.6.1.4.1.207.7.91 | ScalarfrIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.207.8 | NodemibObject | |||
| 1.3.6.1.4.1.207.8.1 | NodehubMib | |||
| 1.3.6.1.4.1.207.8.1.1 | NoderptrInfo | |||
| 1.3.6.1.4.1.207.8.1.1.1 | ScalaractualIPAddr | read-only | mandatory | The actual IP Address that is currently being used by the hub. This could be the same value as hubIPAddr, or it may be different if another IP Address was rece… |
| 1.3.6.1.4.1.207.8.1.1.2 | ScalarhubIPAddr | read-write | mandatory | The configured IP Address of the hub. |
| 1.3.6.1.4.1.207.8.1.1.3 | ScalarsubnetMask | read-write | mandatory | Subnet mask of the hub. |
| 1.3.6.1.4.1.207.8.1.1.4 | ScalarrouterAddr | read-write | mandatory | Gateway/router address of the hub. |
| 1.3.6.1.4.1.207.8.1.1.5 | ScalarsnmpManager | read-write | deprecated | IP Address of the hub's SNMP manager to which Traps will be sent. |
| 1.3.6.1.4.1.207.8.1.1.6 | ScalarsoftwareProduct | read-only | mandatory | The ATI software product model number running in the hub. |
| 1.3.6.1.4.1.207.8.1.1.7 | ScalarsoftwareLevel | read-only | mandatory | The software release level running in the hub. |
| 1.3.6.1.4.1.207.8.1.1.8 | ScalarconfigurationChanged | read-only | mandatory | A flag, set to the value changed(1) when any of the hub's status or configuration has been changed. When this object is read, then the value is reset to nochan… |
| 1.3.6.1.4.1.207.8.1.1.9 | TablerptrNmMgrTable | not-accessible | mandatory | A list of SNMP Trap Manager stations Entries. The number of entries is given by the rptrNmMgrTotal mib object. |
| 1.3.6.1.4.1.207.8.1.1.9.1 | RowrptrNmMgrEntry | not-accessible | mandatory | An Trap receipt Manager Entry containing ipaddress of the configured NMS's to which Traps are sent. |
| 1.3.6.1.4.1.207.8.1.1.9.1.1 | ColumnrptrNmMgrIndex | read-only | mandatory | The Index of SNMP Managers IP Address. |
| 1.3.6.1.4.1.207.8.1.1.9.1.2 | ColumnrptrNmMgrIpAddr | read-write | mandatory | The IP Address of the NMS host configured. |
| 1.3.6.1.4.1.207.8.1.1.10 | TabledeviceTable | not-accessible | mandatory | The table contains the mapping of all devices in the chassis. For all hubs and switches, the object 'deviceQuadrant' returns 'right' (1). For docking devices, … |
| 1.3.6.1.4.1.207.8.1.1.10.1 | RowdeviceEntry | not-accessible | mandatory | The device entry in the DeviceTable. |
| 1.3.6.1.4.1.207.8.1.1.10.1.1 | ColumndeviceIndex | read-only | mandatory | The Slot number in the chassis where the device is installed. |
| 1.3.6.1.4.1.207.8.1.1.10.1.2 | ColumndeviceQuadrant | read-only | mandatory | The Quadrant of the device. |
| 1.3.6.1.4.1.207.8.1.1.10.1.3 | ColumndeviceDescr | read-only | mandatory | TurboStack product family only. A textual description of the device. For devices that are repeaters, this value is identical to the rptrGroupDescr object. |
| 1.3.6.1.4.1.207.8.1.1.10.1.4 | ColumndeviceObjectID | read-only | mandatory | TurboStack product family only. The sysObject identification of the device. For devices that are repeaters, this value is identical to the rptrGroupObjectID ob… |
| 1.3.6.1.4.1.207.8.1.1.10.1.5 | ColumndeviceIpAddr | read-only | mandatory | TurboStack product family only. The IP address (if present) of the device. For hubs devices, this object will return the same value as hubIPAddr. |
| 1.3.6.1.4.1.207.8.1.1.10.1.6 | ColumndevicePortCapacity | read-only | mandatory | TurboStack product family only. The number of ports contained within the device. Valid range is 1-1024. Within each device, the ports are uniquely numbered in … |
| 1.3.6.1.4.1.207.8.1.1.11 | ScalarlocalOmegaState | read-write | mandatory | This object enables the Local Omega to be enabled or disabled. |
| 1.3.6.1.4.1.207.8.1.1.12 | ScalarremoteOmegaState | read-write | mandatory | This object enables the Remote Omega to be enabled or disabled. |
| 1.3.6.1.4.1.207.8.1.2 | NodegroupInfo | |||
| 1.3.6.1.4.1.207.8.1.2.1 | ScalarledInfo | read-only | deprecated | See groupLEDInfo |
| 1.3.6.1.4.1.207.8.1.2.2 | TablegroupInfoTable | not-accessible | mandatory | Table of group specific information. |
| 1.3.6.1.4.1.207.8.1.2.2.1 | RowgroupInfoEntry | not-accessible | mandatory | An entry in the table, containing information about a single group of ports. |
| 1.3.6.1.4.1.207.8.1.2.2.1.1 | ColumngroupInfoIndex | read-only | mandatory | This object identifies the group within the repeater for which this entry contains information. |
| 1.3.6.1.4.1.207.8.1.2.2.1.2 | ColumngroupLEDInfo | read-only | mandatory | This information encodes the current state of the module per-port LEDs. |
| 1.3.6.1.4.1.207.8.1.2.2.1.3 | ColumngroupSegmentation | read-write | mandatory | AT-3100 product family only. This object controls the segmentation option for this group. It may be segmented, connected, or using the module's external segmen… |
| 1.3.6.1.4.1.207.8.1.2.2.1.4 | ColumngroupSecurity | read-write | mandatory | AT-3100 product family only. This object controls the Security option for this group. It may be enabled, disabled, or using module's external security switch. |
| 1.3.6.1.4.1.207.8.1.2.2.1.5 | ColumngroupIntruderProtection | read-write | mandatory | AT-3100 and TurboStack product families only. This object controls the Intruder Protection option for this group/module. For TurboStack products, disabled turn… |
| 1.3.6.1.4.1.207.8.1.2.2.1.6 | ColumngroupSrcAddrLearningMode | read-write | mandatory | AT-3100 product family only. This object indicates the Source Address Learning Mode. Mode1 : Automatic; passive devices: Automatic MAC address learning. Re-lea… |
| 1.3.6.1.4.1.207.8.1.2.2.1.7 | ColumngroupIntruderTrap | read-write | mandatory | AT-3100 and TurboStack product families only. This object controls the action to be taken by this group/module when an Intruder Alert event occurs. When this o… |
| 1.3.6.1.4.1.207.8.1.2.2.1.8 | ColumngroupIntruderDisable | read-write | mandatory | AT-3100 and TurboStack product families only. This object controls the action to be taken by this group/module when an Intruder Alert event occurs. When this o… |
| 1.3.6.1.4.1.207.8.1.2.2.1.9 | ColumngroupOperStatus | read-only | mandatory | TurboStack product family only. An object that indicates the operational status of the module. For modules that are repeaters, this value is identical to the r… |
| 1.3.6.1.4.1.207.8.1.2.2.1.10 | ColumngroupDescr | read-only | mandatory | TurboStack product family only. A textual description of the module. For modules that are repeaters, this value is identical to the rptrGroupDescr object. |
| 1.3.6.1.4.1.207.8.1.2.2.1.11 | ColumngroupObjectID | read-only | deprecated | TurboStack product family only. The sysObject identification of the module. For modules that are repeaters, this value is identical to the rptrGroupObjectID ob… |
| 1.3.6.1.4.1.207.8.1.2.2.1.12 | ColumngroupIPAddress | read-only | deprecated | TurboStack product family only. The IP address (if any) of the module. For modules that are repeaters, this value is identical to the actualIPAddr object. For … |
| 1.3.6.1.4.1.207.8.1.2.2.1.13 | ColumngroupPortCapacity | read-only | deprecated | TurboStack product family only. The number of ports contained within the module. Valid range range is 1-1024. Within each module, the ports are uniquely number… |
| 1.3.6.1.4.1.207.8.1.2.2.1.14 | ColumngroupEraseSourceAddressTable | read-write | mandatory | TurboStack product family only. This object, when Set to the erase value, will clear (empty) the module Source Address Table, deleting all learned MAC addresse… |
| 1.3.6.1.4.1.207.8.1.2.2.1.15 | ColumngroupAddSourceAddress | read-write | mandatory | TurboStack product family only. This object, when Set with a 48-bit MAC address value, will add the new MAC address to the module Source Address Table. A Get o… |
| 1.3.6.1.4.1.207.8.1.2.2.1.16 | ColumngroupDeleteSourceAddress | read-write | mandatory | TurboStack product family only. This object, when Set with a 48-bit MAC address value, will delete the MAC address from the module Source Address Table. A Get … |
| 1.3.6.1.4.1.207.8.1.2.2.1.17 | ColumngroupLimitAddressPerPort | read-write | mandatory | TurboStack product family only. This object configures the module to allow no limitation on number of source addresses on its ports, or limit to only 1 source … |
| 1.3.6.1.4.1.207.8.1.2.2.1.18 | ColumngroupCheckPrimaryTimer | read-write | mandatory | TurboStack product family only. The Check Primary Timer is the timer value in seconds which determines how long to wait before checking if the primary port cou… |
| 1.3.6.1.4.1.207.8.1.2.2.1.19 | ColumngroupReceiveFailureTimer | read-write | mandatory | TurboStack product family only. The Receive Failure Timer is the timer value in seconds which determines how long to wait before the secondary port takes over … |
| 1.3.6.1.4.1.207.8.1.2.2.1.20 | ColumngroupCheckResampleTimer | read-write | mandatory | TurboStack product family only. The Resample Timer is the timer value in milliseconds which determines how long to sample/test if the primary port could receiv… |
| 1.3.6.1.4.1.207.8.1.3 | NodeportInfo | |||
| 1.3.6.1.4.1.207.8.1.3.1 | TableatiPortTable | not-accessible | mandatory | Table of descriptive and status information about the ports. |
| 1.3.6.1.4.1.207.8.1.3.1.1 | RowatiPortEntry | not-accessible | mandatory | An entry in the table, containing information about a single port. |
| 1.3.6.1.4.1.207.8.1.3.1.1.1 | ColumnatiPortGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.4.1.207.8.1.3.1.1.2 | ColumnatiPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. This value can never be greater than rptrGroupPortCapacity for the … |
| 1.3.6.1.4.1.207.8.1.3.1.1.3 | ColumnportName | read-write | mandatory | Port Name |
| 1.3.6.1.4.1.207.8.1.3.1.1.4 | ColumnportState | read-write | mandatory | Port State option: enabled allow repeating of packets through the port; disabled turns off the port and prevents packets repeating through the port. |
| 1.3.6.1.4.1.207.8.1.3.1.1.5 | ColumnlinkTest | read-write | mandatory | Link Test option: enabled turns on checking for link test signals for the port; disabled turns off checking for link test signals. |
| 1.3.6.1.4.1.207.8.1.3.1.1.6 | ColumnaltReconnection | read-write | mandatory | Reconnection Method: 1=IEEE Standard, 2=Alternate. |
| 1.3.6.1.4.1.207.8.1.3.1.1.7 | ColumnpolarityCorrection | read-write | mandatory | Polarity Correction option: enabled turns on automatic polarity correction for the port; disabled turns off automatic polarity correction. |
| 1.3.6.1.4.1.207.8.1.3.1.1.8 | ColumnpartitionedLED | read-only | mandatory | This object reflects the current actual partitioning state of the port. The notpartitioned value means that the port is operational and repeating through the p… |
| 1.3.6.1.4.1.207.8.1.3.1.1.9 | ColumnlinkTestLED | read-only | mandatory | This object reflects the current actual link test state of the port. The nolinktesterror value means that valid link integrity test signals have been detected … |
| 1.3.6.1.4.1.207.8.1.3.1.1.10 | ColumnpolarityLED | read-only | mandatory | This object reflects the current actual polarity state of the port. The notreversed value means that the port-to-device cable connection is properly polarized.… |
| 1.3.6.1.4.1.207.8.1.3.1.1.11 | ColumnportMACAddress | read-write | mandatory | AT-3100 product family only. This object is either the MAC address of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this… |
| 1.3.6.1.4.1.207.8.1.3.1.1.12 | ColumnportFrames-64-127bytes | read-only | mandatory | TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 64 through 127 octets. |
| 1.3.6.1.4.1.207.8.1.3.1.1.13 | ColumnportFrames-128-255bytes | read-only | mandatory | TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 128 through 255 octets. |
| 1.3.6.1.4.1.207.8.1.3.1.1.14 | ColumnportFrames-256-511bytes | read-only | mandatory | TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 256 through 511 octets. |
| 1.3.6.1.4.1.207.8.1.3.1.1.15 | ColumnportFrames-512-1023bytes | read-only | mandatory | TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 512 through 1023 octets. |
| 1.3.6.1.4.1.207.8.1.3.1.1.16 | ColumnportFrames-1024-1518bytes | read-only | mandatory | TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 1024 through 1518 octets. |
| 1.3.6.1.4.1.207.8.1.3.1.1.17 | ColumnportRedundantPort | read-write | mandatory | TurboStack product family only. This is the redundant port for atiPortIndex. If the port is a secondary port as indicated in portRedundantPosition, then it ser… |
| 1.3.6.1.4.1.207.8.1.3.1.1.18 | ColumnportRedundantPosition | read-only | mandatory | TurboStack product family only. This object will retrieve the redundant position of the port, primary or secondary port, if the port has a redundant link to it. |
| 1.3.6.1.4.1.207.8.1.3.1.1.19 | ColumnportLearningState | read-write | mandatory | TurboStack product family only. This object enable the learning on a port to be shut ON or OFF. Once the learning is Shut Off, the learning of MAC Address will… |
| 1.3.6.1.4.1.207.8.1.4 | NoderptrStat | |||
| 1.3.6.1.4.1.207.8.1.4.1 | ScalarhubReadableFrames | read-only | mandatory | The sum total of the Readable Frames Counters of all ports on all modules/groups |
| 1.3.6.1.4.1.207.8.1.4.2 | ScalarhubReadableOctets | read-only | mandatory | The sum total of the Readable Octets (bytes) Counters of all ports on all modules/groups |
| 1.3.6.1.4.1.207.8.1.4.3 | ScalarhubFCSError | read-only | mandatory | The sum total of the FCS (CRC) Error Counters of all ports on all modules/groups |
| 1.3.6.1.4.1.207.8.1.4.4 | ScalarhubAlignError | read-only | mandatory | The sum total of the Alignment Error Counters of all ports on all modules/groups |
| 1.3.6.1.4.1.207.8.1.4.5 | ScalarhubFrameTooLong | read-only | mandatory | The sum total of the Frame Too Long Error Counters of all ports on all modules/groups |
| 1.3.6.1.4.1.207.8.1.4.6 | ScalarhubShortEvent | read-only | mandatory | The sum total of the Short Event Error Counters of all ports on all modules/groups |
| 1.3.6.1.4.1.207.8.1.4.7 | ScalarhubRunt | read-only | mandatory | The sum total of the Runt Error Counters of all ports on all modules/groups |
| 1.3.6.1.4.1.207.8.1.4.8 | ScalarhubLateEvent | read-only | mandatory | The sum total of the Late Event Error Counters of all ports on all modules/groups |
| 1.3.6.1.4.1.207.8.1.4.9 | ScalarhubVeryLongEvent | read-only | mandatory | The sum total of the Very Long Event Error (Jabber) Counters of all ports on all modules/groups |
| 1.3.6.1.4.1.207.8.1.4.10 | ScalarhubDataRateMism | read-only | mandatory | The sum total of the Data Rate Mismatch Error Counters of all ports on all modules/groups |
| 1.3.6.1.4.1.207.8.1.4.11 | ScalarhubAutoPartition | read-only | mandatory | The sum total of the Auto Port Partition Counters of all ports on all modules/groups |
| 1.3.6.1.4.1.207.8.1.4.12 | ScalarhubTotalError | read-only | mandatory | The sum total of all Error Counters of all ports on all modules/groups |
| 1.3.6.1.4.1.207.8.1.4.13 | ScalarhubPortCollision | read-only | mandatory | The sum total of the Port Collision Counters of all ports on all modules/groups |
| 1.3.6.1.4.1.207.8.1.4.14 | ScalarhubFrames-64-127bytes | read-only | mandatory | TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 64… |
| 1.3.6.1.4.1.207.8.1.4.15 | ScalarhubFrames-128-255bytes | read-only | mandatory | TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 12… |
| 1.3.6.1.4.1.207.8.1.4.16 | ScalarhubFrames-256-511bytes | read-only | mandatory | TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 25… |
| 1.3.6.1.4.1.207.8.1.4.17 | ScalarhubFrames-512-1023bytes | read-only | mandatory | TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 51… |
| 1.3.6.1.4.1.207.8.1.4.18 | ScalarhubFrames-1024-1518bytes | read-only | mandatory | TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 10… |
| 1.3.6.1.4.1.207.8.1.5 | NodegroupStat | |||
| 1.3.6.1.4.1.207.8.1.5.1 | TablegroupStatTable | not-accessible | mandatory | Table of performance and error statistics for the groups. |
| 1.3.6.1.4.1.207.8.1.5.1.1 | RowgroupStatEntry | not-accessible | mandatory | An entry in the table, containing total performance and error statistics for a single group. Regular retrieval of the information in this table provides a mean… |
| 1.3.6.1.4.1.207.8.1.5.1.1.1 | ColumngroupStatIndex | read-only | mandatory | This object identifies the group within the repeater for which this entry contains information. |
| 1.3.6.1.4.1.207.8.1.5.1.1.2 | ColumngroupFCSError | read-only | mandatory | The sum total of the FCS (CRC) Error Counters of all ports on this module/group |
| 1.3.6.1.4.1.207.8.1.5.1.1.3 | ColumngroupAlignError | read-only | mandatory | The sum total of the Alignment Error Counters of all ports on this module/group |
| 1.3.6.1.4.1.207.8.1.5.1.1.4 | ColumngroupFrameTooLong | read-only | mandatory | The sum total of the Frame Too Long Error Counters of all ports on this module/group |
| 1.3.6.1.4.1.207.8.1.5.1.1.5 | ColumngroupShortEvent | read-only | mandatory | The sum total of the Short Event Error Counters of all ports on this module/group |
| 1.3.6.1.4.1.207.8.1.5.1.1.6 | ColumngroupRunt | read-only | mandatory | The sum total of the Runt Error Counters of all ports on this module/group |
| 1.3.6.1.4.1.207.8.1.5.1.1.7 | ColumngroupPortCollision | read-only | mandatory | The sum total of the Port Collision Counters of all ports on this module/group |
| 1.3.6.1.4.1.207.8.1.5.1.1.8 | ColumngroupLateEvent | read-only | mandatory | The sum total of the Late Event Error Counters of all ports on this module/group |
| 1.3.6.1.4.1.207.8.1.5.1.1.9 | ColumngroupVeryLongEvent | read-only | mandatory | The sum total of the Very Long Event Error (Jabber) Counters of all ports on this module/group |
| 1.3.6.1.4.1.207.8.1.5.1.1.10 | ColumngroupDataRateMism | read-only | mandatory | The sum total of the Data Rate Mismatch Error Counters of all ports on this module/group |
| 1.3.6.1.4.1.207.8.1.5.1.1.11 | ColumngroupAutoPartition | read-only | mandatory | The sum total of the Auto Port Partition Counters of all ports on this module/group |
| 1.3.6.1.4.1.207.8.1.5.1.1.12 | ColumngroupFrames-64-127bytes | read-only | mandatory | TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 64 … |
| 1.3.6.1.4.1.207.8.1.5.1.1.13 | ColumngroupFrames-128-255bytes | read-only | mandatory | TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 128… |
| 1.3.6.1.4.1.207.8.1.5.1.1.14 | ColumngroupFrames-256-511bytes | read-only | mandatory | TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 256… |
| 1.3.6.1.4.1.207.8.1.5.1.1.15 | ColumngroupFrames-512-1023bytes | read-only | mandatory | TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 512… |
| 1.3.6.1.4.1.207.8.1.5.1.1.16 | ColumngroupFrames-1024-1518bytes | read-only | mandatory | TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 102… |
| 1.3.6.1.4.1.207.8.1.6 | NodegroupSAT | |||
| 1.3.6.1.4.1.207.8.1.6.1 | TablegroupSourceAddressTable | not-accessible | mandatory | TurboStack product family only. Table of learned and/or configured source MAC addresses which defines the only valid and allowable source addresses for this mo… |
| 1.3.6.1.4.1.207.8.1.6.1.1 | RowgroupSATEntry | not-accessible | mandatory | TurboStack product family only. An entry in the Source Address Table, containing information about a single source MAC address. |
| 1.3.6.1.4.1.207.8.1.6.1.1.1 | ColumngroupSATModule | read-only | mandatory | TurboStack product family only. This object identifies the group within the repeater for which this entry contains information. |
| 1.3.6.1.4.1.207.8.1.6.1.1.2 | ColumngroupSATIndex | read-only | mandatory | TurboStack product family only. This object identifies the index within the Source Address Table for which this entry contains information. |
| 1.3.6.1.4.1.207.8.1.6.1.1.3 | ColumngroupSATMacAddress | read-only | mandatory | TurboStack product family only. This object is the learned or configured source MAC address. If no MAC address has been learned for this table entry (if this i… |
| 1.3.6.1.4.1.207.8.1.6.1.1.4 | ColumngroupSATPort | read-only | mandatory | TurboStack product family only. This object is the port number where the source MAC address was last detected. If the MAC address has not been detected since t… |
| 1.3.6.1.4.1.207.9 | NodeatiTrapAttrs | |||
| 1.3.6.1.4.1.207.9.1 | ScalaratiTrapIntruderMacAddress | not-accessible | mandatory | The Mac address of the Intruder which is different from the rfc1516 object rptrAddrTrackLastSourceAddress is seen on port which is the the next object |
| 1.3.6.1.4.1.207.9.2 | ScalaratiTrapIntruderModuleNumber | not-accessible | mandatory | This is the module number on which an intruder was seen. |
| 1.3.6.1.4.1.207.9.3 | ScalaratiTrapIntruderPortNumber | not-accessible | mandatory | This is the port number on which an intruder was seen. |
| 1.3.6.1.4.1.207.9.4 | ScalaratiPortChangeDirection | not-accessible | mandatory | This is the direction of redundant port change. These two values are used in the trap atiRedundantPortChangeTrap. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddress | OCTET STRING (SIZE (6)) |