ATM-FORUM-AUTO-CONFIG
95 objects
No module-level DESCRIPTION found.
Imported Objects
| ATM-FORUM-TC-MIB | atmForum atmForumUni |
| RFC-1215 | TRAP-TYPE |
| SNMPv2-SMI | OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowPointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353.2.12 | NodeatmfAutoConfigGroup | |||
| 1.3.6.1.4.1.353.2.12.1 | TableatmfAtmServiceTypeTable | not-accessible | current | The ATM Forum ILMI Auto Configuration Extension ATM Service Type Information. |
| 1.3.6.1.4.1.353.2.12.1.1 | RowatmfAtmServiceTypeEntry | not-accessible | current | An entry in the service type table describes the reference information about a service that may be associated with individual ATM connections for the purpose o… |
| 1.3.6.1.4.1.353.2.12.1.1.1 | ColumnatmfAtmServiceTypeIndex | read-only | current | A number between which identifies the entry in the Service Type Table. |
| 1.3.6.1.4.1.353.2.12.1.1.2 | ColumnatmfAtmServiceProviderName | read-only | current | This string identifies the name of the service provider for the service described in this profile. The value of this attribute should not set to NULL. |
| 1.3.6.1.4.1.353.2.12.1.1.3 | ColumnatmfAtmServiceName | read-only | current | This string identifies the name of the service described in this profile. The value of this attribute should not be set to NULL. |
| 1.3.6.1.4.1.353.2.12.1.1.4 | ColumnatmfAtmServiceSubName | read-only | current | This string identifies the sub-name of the service described in this profile. A Service may have zero or more sub-names, each with its own service type profile. |
| 1.3.6.1.4.1.353.2.12.1.1.5 | ColumnatmfAtmServiceClient | read-only | current | This string identifies the client protocol of the service described in this profile. A Service (sub-service) may have zero or more described client, each with … |
| 1.3.6.1.4.1.353.2.12.1.1.6 | ColumnatmfAtmServiceTMCategory | read-only | current | The TM 4.0 Service category used for this service type. Indicates CBR, rt-VBR, nrt-VBR, ABR, UBR, (or GFR) |
| 1.3.6.1.4.1.353.2.12.1.1.7 | ColumnatmfAtmServiceTMConformanceDef | read-only | current | The TM 4.1 conformance definition used for this service type. Indicates CBR.1, VBR.1, VBR.2, VBR.3, UBR.1, UBR.2, ABR, GFR.1, or GFR.2. |
| 1.3.6.1.4.1.353.2.12.2 | TableatmfAtmServiceConnInfoTable | not-accessible | current | The ATM Forum ILMI Auto Configuration Extension ATM Service Connection Information. |
| 1.3.6.1.4.1.353.2.12.2.1 | RowatmfAtmServiceConnInfoEntry | not-accessible | current | An entry in the service connection information table describes the ATM connection that provides a service across an ATM interface. The connection is identified… |
| 1.3.6.1.4.1.353.2.12.2.1.1 | ColumnatmfAtmServicePortIndex | read-only | current | The value of 0 (zero)has the special meaning of identifying the ATM Interface over which this ILMI message was received. |
| 1.3.6.1.4.1.353.2.12.2.1.2 | ColumnatmfAtmServiceVpi | read-only | current | The VPI value of the ATM service connection at the local ATM interface. |
| 1.3.6.1.4.1.353.2.12.2.1.3 | ColumnatmfAtmServiceVci | read-only | current | The VCI value of the ATM service connection at the local ATM interface. If the atmfAtmServiceSignalId indicates that the connection is a VP connection, the val… |
| 1.3.6.1.4.1.353.2.12.2.1.4 | ColumnatmfAtmServiceSignalId | read-only | current | This attribute represents the characteristic information of the layer network domain. It may be set to either VC characteristic information (vcCI) or VP charac… |
| 1.3.6.1.4.1.353.2.12.2.1.5 | ColumnatmfAtmServiceConnServiceIndex | read-only | current | The value of this object identifies the row in the atmfAtmServiceTypeTable. This entry represents the association between an ATM service connection and an ATM … |
| 1.3.6.1.4.1.353.2.12.2.1.6 | ColumnatmfAtmServiceConnName | read-only | current | This string identifies the name of the service connection. The value of this attribute may be set to NULL. |
| 1.3.6.1.4.1.353.2.12.2.1.7 | ColumnatmfAtmServiceConnAALType | read-only | current | Describes the AAL Type of the ATM service connection. A value of none indicates that no AAL is used. The AAL types include AAL1, AAL 3/4, and AAL 5. The value … |
| 1.3.6.1.4.1.353.2.12.2.1.8 | ColumnatmfAtmServiceConnAALIndex | read-only | current | The value of this object identifies the row in the atmfAAL1ProfileTable for AAL 1 connection, the atmfAAL34ProfileTable for AAL3/4 connection, and the atmfAAL5… |
| 1.3.6.1.4.1.353.2.12.3 | TableatmfAAL1ProfileTable | not-accessible | current | The ATM Forum ILMI Auto Configuration Extension AAL1 Profile Information. |
| 1.3.6.1.4.1.353.2.12.3.1 | RowatmfAAL1ProfileEntry | not-accessible | current | An entry in the AAL1 Profile table provides data that describes the AAL1 processing function. |
| 1.3.6.1.4.1.353.2.12.3.1.1 | ColumnatmfAAL1ProfileIndex | read-only | current | A number between which identifies the entry in the AAL1 Profile Table. |
| 1.3.6.1.4.1.353.2.12.3.1.2 | ColumnatmfAAL1Subtype | read-only | current | This attribute describes AAL type 1 subtype used by the CBR service application (e.g. 64 KBPS voice band signal transport, circuit transport). |
| 1.3.6.1.4.1.353.2.12.3.1.3 | ColumnatmfAAL1CBRRate | read-only | current | This attribute describes the rate of the CBR service supported by the AAL. |
| 1.3.6.1.4.1.353.2.12.3.1.4 | ColumnatmfAAL1ClkRecoveryType | read-only | current | This attribute indicates whether the clock recovery type is synchronous, asynchronous-SRTS(Synchronous Residual Time Stamp), or asynchronous-Adaptive Clock Rec… |
| 1.3.6.1.4.1.353.2.12.3.1.5 | ColumnatmfAAL1FEC | read-only | current | This attribute indicates the FEC method: no FEC, FEC for Loss Sensitive Signal Transport, or FEC for Delay Sensitive Signal Transport. |
| 1.3.6.1.4.1.353.2.12.3.1.6 | ColumnatmfAAL1SDT | read-only | current | This attribute indicates whether Structured Data Transfer (SDT) has been configured at the AAL. A value of TRUE means SDT has been selected. This attribute val… |
| 1.3.6.1.4.1.353.2.12.3.1.7 | ColumnatmfAAL1PartiallyFilledCells | read-only | current | This attribute identifies the number of leading octets in use. |
| 1.3.6.1.4.1.353.2.12.3.1.8 | ColumnatmfAAL1CellLossIntegrPeriod | read-only | current | This attribute represents the time in milliseconds for the cell loss integration period. If cells are lost for this period of time, the Interworking VCC Termin… |
| 1.3.6.1.4.1.353.2.12.4 | TableatmfAAL34ProfileTable | not-accessible | current | The ATM Forum ILMI Auto Configuration Extension AAL3/4 Profile Information. |
| 1.3.6.1.4.1.353.2.12.4.1 | RowatmfAAL34ProfileEntry | not-accessible | current | An entry in the AAL34 Profile table provides data that describes the AAL3/4 processing function. |
| 1.3.6.1.4.1.353.2.12.4.1.1 | ColumnatmfAAL34ProfileIndex | read-only | current | A number between which identifies the entry in the AAL3/4 Profile Table. |
| 1.3.6.1.4.1.353.2.12.4.1.2 | ColumnatmfAAL34MaxCpcsSduSizeForward | read-only | current | This attribute represents the maximum CPCS_PDU size that will be transmitted over the connection in both the incoming (forward) direction of transmission. |
| 1.3.6.1.4.1.353.2.12.4.1.3 | ColumnatmfAAL34MaxCpcsSduSizeBackward | read-only | current | This attribute represents the maximum CPCS_PDU size that will be transmitted over the connection in both the outgoing (backward) direction of transmission. |
| 1.3.6.1.4.1.353.2.12.4.1.4 | ColumnatmfAAL34MIDRangeLow | read-only | current | This attribute represents the low value of MID supported at the AAL for the supporting VCC. |
| 1.3.6.1.4.1.353.2.12.4.1.5 | ColumnatmfAAL34MIDRangeHigh | read-only | current | This attribute represents the high value of MID supported at the AAL for the supporting VCC. |
| 1.3.6.1.4.1.353.2.12.4.1.6 | ColumnatmfAAL34AALMode | read-only | current | This attribute indicates whether the AAL for the supporting VCC is operating in message mode or streaming mode, assured or unassured. |
| 1.3.6.1.4.1.353.2.12.4.1.7 | ColumnatmfAAL34SscsType | read-only | current | This attribute identifies the SSCS type for the AAL. Valid values are NULL, Data SSCS based on SSCOP (assured operation), Data SSCS based on SSCOP (non-assured… |
| 1.3.6.1.4.1.353.2.12.5 | TableatmfAAL5ProfileTable | not-accessible | current | The ATM Forum ILMI Auto Configuration Extension AAL5 Profile Information. |
| 1.3.6.1.4.1.353.2.12.5.1 | RowatmfAAL5ProfileEntry | not-accessible | current | An entry in the AAL5 Profile table provides data that describes the AAL5 processing function. |
| 1.3.6.1.4.1.353.2.12.5.1.1 | ColumnatmfAAL5ProfileIndex | read-only | current | A number between which identifies the entry in the AAL5 Profile Table. |
| 1.3.6.1.4.1.353.2.12.5.1.2 | ColumnatmfAAL5MaxCpcsSduSizeForward | read-only | current | This attribute represents the maximum CPCS_PDU size that will be transmitted over the connection in both the incoming (forward) direction of transmission. |
| 1.3.6.1.4.1.353.2.12.5.1.3 | ColumnatmfAAL5MaxCpcsSduSizeBackward | read-only | current | This attribute represents the maximum CPCS_PDU size that will be transmitted over the connection in both the outgoing (backward) direction of transmission. |
| 1.3.6.1.4.1.353.2.12.5.1.4 | ColumnatmfAAL5AALMode | read-only | current | This attribute indicates whether the AAL for the supporting VCC is operating in message mode or streaming mode, assured or unassured. |
| 1.3.6.1.4.1.353.2.12.5.1.5 | ColumnatmfAAL5SscsType | read-only | current | This attribute identifies the SSCS type for the AAL. Valid values are NULL, Data SSCS based on SSCOP (assured operation), Data SSCS based on SSCOP (non-assured… |
| 1.3.6.1.4.1.353.2.12.6 | TableatmfAAL2CommonProfileTable | not-accessible | current | The ATM Forum ILMI Auto Configuration Extension AAL2 Profile Information. This table contains AAL2 parameters that are common to all AAL2 applications. These p… |
| 1.3.6.1.4.1.353.2.12.6.1 | RowatmfAAL2CommonProfileEntry | not-accessible | current | An atmfAAL2CommonProfileEntry provides AAL2 common parameters of operation that are to be used by the PVC associated with this entry. |
| 1.3.6.1.4.1.353.2.12.6.1.1 | ColumnatmfAAL2ProfileIndex | read-only | current | A number which uniquely identifies the entry in the AAL2 Profile Table. |
| 1.3.6.1.4.1.353.2.12.6.1.2 | ColumnatmfAAL2ApplicationIdentifier | read-only | current | The application identifier specifies which AAL2 application is using the PVC. In addition it specifies protocol combinations to be used on AAL2 channels betwee… |
| 1.3.6.1.4.1.353.2.12.6.1.3 | ColumnatmfAAL2ConfigResponsibility | read-only | current | This object identifies which management channel is responsible for AAL2 provisioning and auto-configuration. The user-side IME must check the value of this par… |
| 1.3.6.1.4.1.353.2.12.6.1.4 | ColumnatmfAAL2CpsMaxMultiplexedChannels | read-only | current | Maximum number of multiplexed channels. |
| 1.3.6.1.4.1.353.2.12.6.1.5 | ColumnatmfAAL2CpsMaxSduLength | read-only | current | Maximum CPS-SDU size given in octets. This parameter is bidirectional, i.e. its value applies to both directions of the AAL2 connection. |
| 1.3.6.1.4.1.353.2.12.6.1.6 | ColumnatmfAAL2SscsMaxSssarSduLength | read-only | current | This is the maximum size and SSSAR-SDU can take as defined in I.366.1. This parameter only applies to those AAL2 channels using I.366.1 SSSAR. This parameter i… |
| 1.3.6.1.4.1.353.2.12.6.1.7 | ColumnatmfAAL2SscsSstedStatus | read-only | current | This specifies whether the SSTED service is used or not. If the value of this object is 'selected' then I.366.1 SSSAR must be supported by the AAL2. This param… |
| 1.3.6.1.4.1.353.2.12.6.1.8 | ColumnatmfAAL2SscsSsadtStatus | read-only | current | This specifies whether SSADT service is used or not. Note that if the value of this object is 'selected' then I.366.1 SSSAR must be supported and by implicatio… |
| 1.3.6.1.4.1.353.2.12.6.1.9 | ColumnatmfAAL2SscsServiceCategory | read-only | current | This object describes the type of service category supported by this AAL2 PVC. |
| 1.3.6.1.4.1.353.2.12.6.1.10 | ColumnatmfAAL2SscsAudioServiceTransport | read-only | current | This object describes whether the Audio Service that is used for transporting voice and voiceband data is enabled or disabled. |
| 1.3.6.1.4.1.353.2.12.6.1.11 | ColumnatmfAAL2SscsProfileSource | read-only | current | This attribute describes the source of the profile. |
| 1.3.6.1.4.1.353.2.12.6.1.12 | ColumnatmfAAL2SscsIeeeOui | read-only | current | This attribute contains the IEEE Organizationally Unique Identifier (OUI) of the organisation that specified the profile being used, if other than ITU-T. For e… |
| 1.3.6.1.4.1.353.2.12.6.1.13 | ColumnatmfAAL2SscsPredefinedProfileIdentifier | read-only | current | This object describes the predefined profile identifier. |
| 1.3.6.1.4.1.353.2.12.6.1.14 | ColumnatmfAAL2SscsPcmEncoding | read-only | current | This object describes the type of PCM encoding used. |
| 1.3.6.1.4.1.353.2.12.6.1.15 | ColumnatmfAAL2SscsFaxDemodulationTransport | read-only | current | This object describes whether transport of demodulated facsimile data is enabled or disabled. |
| 1.3.6.1.4.1.353.2.12.6.1.16 | ColumnatmfAAL2SscsCasSignalingTransport | read-only | current | This attribute describes whether transport of CAS signaling bits is enabled or disabled. |
| 1.3.6.1.4.1.353.2.12.6.1.17 | ColumnatmfAAL2SscsDtmfDigitPacketTransport | read-only | current | This attribute describes whether transport of DTMF dialled digits is enabled or disabled. |
| 1.3.6.1.4.1.353.2.12.6.1.18 | ColumnatmfAAL2SscsMfR1DigitPacketTransport | read-only | current | This object describes whether transport of MF-R1 dialled digits is enabled or disabled. |
| 1.3.6.1.4.1.353.2.12.6.1.19 | ColumnatmfAAL2SscsMfR2DigitPacketTransport | read-only | current | This object describes whether transport of MF-R2 dialled digits is enabled or disabled. |
| 1.3.6.1.4.1.353.2.12.6.1.20 | ColumnatmfAAL2SscsCircuitModeDataTransport | read-only | current | This object describes whether transport of circuit mode data is enabled or disabled. |
| 1.3.6.1.4.1.353.2.12.6.1.21 | ColumnatmfAAL2SscsCircuitModeDataNumChannels | read-only | current | This object describes the multiplier N in N*64kbit/s circuit mode data. It is only applicable if the value of atmfAAL2SscsCircuitModeDataTransport is 'enabled'. |
| 1.3.6.1.4.1.353.2.12.6.1.22 | ColumnatmfAAL2SscsFrameModeDataTransport | read-only | current | This object describes whether the I.366.2 frame mode data service is enabled or disabled. |
| 1.3.6.1.4.1.353.2.12.6.1.23 | ColumnatmfAAL2SscsFrameModeDataMaxLength | read-only | current | This object specifies the maximum length of I.366.2 frame mode data. It is only applicable if the value of atmfAAL2FrameModeDataTransport is 'enabled'. |
| 1.3.6.1.4.1.353.2.12.6.1.24 | ColumnatmfAAL2SscopSduLength | read-only | current | The Maximum SSCOP-SDU length. This object is only required is the value of atmfAAL2SscsSsadtStatus is selected else it is not applicable. |
| 1.3.6.1.4.1.353.2.12.6.1.25 | ColumnatmfAAL2SscopUuFieldLength | read-only | current | The Maximum SSCOP-UU field length. This object is only required is the value of atmfAAL2SscsSsadtStatus is selected else it is not applicable. |
| 1.3.6.1.4.1.353.2.12.7 | TableatmfAAL2TrunkingProfileTable | not-accessible | current | The ATM Forum ILMI Auto Configuration Extension AAL2 Profile Information. This table contains AAL2 parameters that are specific to the ATM Trunking AAL 2 appli… |
| 1.3.6.1.4.1.353.2.12.7.1 | RowatmfAAL2TrunkingProfileEntry | not-accessible | current | An atmfAAL2TrunkingProfileEntry provides AAL2 parameters of operation for ATM Trunking applications to be used in addition to those provided in the Common AAL2… |
| 1.3.6.1.4.1.353.2.12.7.1.1 | ColumnatmfAAL2Vcci | read-only | current | This object uniquely identifies a PVC between IWFs. |
| 1.3.6.1.4.1.353.2.12.7.1.2 | ColumnatmfAAL2SignalingVcci | read-only | current | This object specifies the VCCI of the PVC that is used to carry the CCS for this PVC. |
| 1.3.6.1.4.1.353.2.12.8 | TableatmfAAL2LESProfileTable | not-accessible | current | The ATM Forum ILMI Auto Configuration Extension AAL2 Profile Information. This table contains AAL2 parameters that are specific to the ATM LES AAL 2 applicatio… |
| 1.3.6.1.4.1.353.2.12.8.1 | RowatmfAAL2LESProfileEntry | not-accessible | current | An atmfAAL2LESProfileEntry provides AAL2 parameters of operation for LES applications to be used in addition to those provided in the Common AAL2 Profile Table… |
| 1.3.6.1.4.1.353.2.12.8.1.1 | ColumnatmfAAL2CpsCIDLowerLimit | read-only | current | The minimum value the CID can take for AAL2 bearer channels and ISDN-D channels. |
| 1.3.6.1.4.1.353.2.12.8.1.2 | ColumnatmfAAL2CpsCIDUpperLimit | read-only | current | The maximum value the CID can take for AAL2 bearer channels and ISDN-D channels. |
| 1.3.6.1.4.1.353.2.12.8.1.3 | ColumnatmfAAL2CpsOptimisation | read-only | current | This object refers to the mode of operation of the CPS on the CP-IWF The value of this object imposes a restriction on the CPS-SDU length and hence must overri… |
| 1.3.6.1.4.1.353.2.12.9 | TableatmfAtmServiceConnInfoExtensionTable | not-accessible | current | The ATM Forum ILMI Auto Configuration Extension ATM Service Connection Information. |
| 1.3.6.1.4.1.353.2.12.9.1 | RowatmfAtmServiceConnInfoExtensionEntry | not-accessible | current | An entry in the service connection information extension table provides additional elements that help describe the ATM connection that provides a service acros… |
| 1.3.6.1.4.1.353.2.12.9.1.1 | ColumnatmfAtmServicePhyMacIdentifier | read-only | current | When the physical and/or MAC layer has more than one PHY-connection or MAC-connection, this object is used to select the PHY- or MAC-connection to be bound to … |
| 1.3.6.1.4.1.353.2.12.10 | TableatmfAtmServiceTypeExtensionTable | not-accessible | current | The ATM Forum ILMI Auto Configuration Extension ATM Service Type Extension Information. |
| 1.3.6.1.4.1.353.2.12.10.1 | RowatmfAtmServiceTypeExtensionEntry | not-accessible | current | An entry in the service type extension table describes additional information about a service that may be associated with individual ATM connections for the pu… |
| 1.3.6.1.4.1.353.2.12.10.1.1 | ColumnatmfAtmServiceLayer2ProtocolId | read-only | current | This object shall be used to select the user plane layer 2 protocol (if any) to be used above the AAL. The first octet of this object shall be encoded as follo… |
| 1.3.6.1.4.1.353.2.12.10.1.2 | ColumnatmfAtmServiceLayer3ProtocolId | read-only | current | This object shall be used to select a user plane layer 3 protocol (or user plane layer 2 bridging). The first octet of this object shall be encoded as follows.… |
| 1.3.6.1.4.1.353.2.12.11 | TableatmfAAL5ProfileExtensionTable | not-accessible | current | Additional parameters for the AAL5 Profile are stored in this table. |
| 1.3.6.1.4.1.353.2.12.11.1 | RowatmfAAL5ProfileExtensionEntry | not-accessible | current | An entry in this table augments an entry in the atmfAAL5ProfileTable |
| 1.3.6.1.4.1.353.2.12.11.1.1 | ColumnatmfAAL5Vcci | read-only | current | This object's value is only applicable if the AAL5 VCC is carrying CCS for AAL2 narrowband calls. |
| 1.3.6.1.4.1.353.2.12.12 | ScalaratmfAtmServiceConfFailReason | read-only | current | The reason for the failure to configure the PVC at the ATU-R |
| 1.3.6.1.4.1.353.2.12.13 | ScalaratmfAtmServiceConfFailOID | read-only | current | This object holds a pointer to a row in the appropriate table depending on the value of the atmfAtmServiceFailReason object. This will allow the network side t… |
| 1.3.6.1.4.1.353.3 | NodeatmfAtmServiceConfFail | The user-side IME will send this trap whenever it is unable to configure itself based on the information provided in the ILMI auto-configuration MIB. The varia… |