ATMSWCH-MIB
110 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.33 | NodeatmSwch | |||
| 1.3.6.1.4.1.81.33.1 | NodeatmSwchBase | |||
| 1.3.6.1.4.1.81.33.1.1 | ScalaratmSwchBaseCurrentPrefix | read-only | mandatory | The ATM prefix currently in use for the switch. |
| 1.3.6.1.4.1.81.33.1.2 | ScalaratmSwchBaseConfigPrefix | read-write | mandatory | The ATM prefix to be used at the next reboot. |
| 1.3.6.1.4.1.81.33.1.3 | ScalaratmSwchBaseEpdThreshold | read-write | mandatory | The percentage of the maximum buffer allocation used in the switch fabric before EPD is invoked. Default is 80%. |
| 1.3.6.1.4.1.81.33.1.4 | ScalaratmSwchBaseAmonAdminState | read-write | mandatory | This enable or disable the AMON statistics gathering in the switch. For Some applications, like Host Statistics, you also need to create a Control Table in ord… |
| 1.3.6.1.4.1.81.33.2 | NodeatmSwchCpu | |||
| 1.3.6.1.4.1.81.33.2.1 | TableatmSwchCpuTable | not-accessible | mandatory | A table containing information about each CPU in the hub |
| 1.3.6.1.4.1.81.33.2.1.1 | RowatmSwchCpuEntry | not-accessible | mandatory | An entry containing information about a particular CPU in the hub |
| 1.3.6.1.4.1.81.33.2.1.1.1 | ColumnatmSwchCpuIndex | read-only | mandatory | Index into this table. |
| 1.3.6.1.4.1.81.33.2.1.1.2 | ColumnatmSwchCpuHwVersion | read-only | mandatory | CPU Hardware version. Stored in the format :- first Byte - hardware major version number - hardware minor version number last Byte - hardware debug version num… |
| 1.3.6.1.4.1.81.33.2.1.1.3 | ColumnatmSwchCpuSoftErrCode | read-only | mandatory | Software Error Code. This variable contain a copy of the error code of the last event to have a trap sent. |
| 1.3.6.1.4.1.81.33.2.1.1.4 | ColumnatmSwchCpuSoftErrString | read-only | mandatory | Software Error Description. This variable contain a copy of the error string of the last event to have a trap sent. |
| 1.3.6.1.4.1.81.33.2.1.1.5 | ColumnatmSwchCpuUtilization | read-only | mandatory | An estimate of the current CPU utilization in one-hundredths of a percent. |
| 1.3.6.1.4.1.81.33.2.1.1.6 | ColumnatmSwchCpuRamSize | read-only | mandatory | DRAM plus SIMM size on the processor board, in bytes |
| 1.3.6.1.4.1.81.33.2.1.1.7 | ColumnatmSwchCpuRamUsed | read-only | mandatory | An estimate of the amount of DRAM plus SIMM currently in use, in bytes. |
| 1.3.6.1.4.1.81.33.2.1.1.8 | ColumnatmSwchCpuFlashSize | read-only | mandatory | Flash memory size, in bytes. |
| 1.3.6.1.4.1.81.33.2.1.1.9 | ColumnatmSwchCpuFlashUsed | read-only | mandatory | Flash memory used, in bytes. |
| 1.3.6.1.4.1.81.33.2.1.1.10 | ColumnatmSwchCpuEepromSize | read-only | mandatory | EEPROM memory size, in bytes. |
| 1.3.6.1.4.1.81.33.2.1.1.11 | ColumnatmSwchCpuEepromUsed | read-only | mandatory | EEPROM memory used, in bytes. |
| 1.3.6.1.4.1.81.33.2.1.1.12 | ColumnatmSwchCpuTime | read-write | mandatory | Host time measured in seconds since midnight, 1st January, 1970. |
| 1.3.6.1.4.1.81.33.2.1.1.13 | ColumnatmSwchCpuSysUpTime | read-only | mandatory | The time (in hundredths of a second) since the network management portion of the module was last re-initialized. This is like the MIB-2 sysUpTime but for a spe… |
| 1.3.6.1.4.1.81.33.2.1.1.14 | ColumnatmSwchCpuSvcPtPtInConns | read-only | mandatory | The number of switched virtual point to point connections through this port, where this port is the point of entry for the call setup. |
| 1.3.6.1.4.1.81.33.2.1.1.15 | ColumnatmSwchCpuSvcPtPtOutConns | read-only | mandatory | The number of switched virtual point to point connections through this port, where this port is the point of exit for the call setup. |
| 1.3.6.1.4.1.81.33.2.1.1.16 | ColumnatmSwchCpuSvcPtMptRootConns | read-only | mandatory | The number of switched virtual point to multipoint connections through this port, where this port is the point of entry for the call setup. |
| 1.3.6.1.4.1.81.33.2.1.1.17 | ColumnatmSwchCpuSvcPtMptLeafConns | read-only | mandatory | The number of switched virtual point to multipoint connections through this port, where this port is the point of exit for the call setup. |
| 1.3.6.1.4.1.81.33.2.1.1.18 | ColumnatmSwchCpuPvcPtPtConns | read-only | mandatory | The number of permanent virtual point to point connections through this port. |
| 1.3.6.1.4.1.81.33.5 | NodeatmSwchSlot | |||
| 1.3.6.1.4.1.81.33.5.1 | TableatmSwchSlotTable | not-accessible | mandatory | A table containing information about each slot in the switch. |
| 1.3.6.1.4.1.81.33.5.1.1 | RowatmSwchSlotEntry | not-accessible | mandatory | An entry containing information about a particular slot in the switch. |
| 1.3.6.1.4.1.81.33.5.1.1.1 | ColumnatmSwchSlotIndex | read-only | mandatory | Index into this table, by slot number. |
| 1.3.6.1.4.1.81.33.5.1.1.2 | ColumnatmSwchSlotRxCellDiscards | read-only | mandatory | cell discard counter for the Rx path (line to switch). |
| 1.3.6.1.4.1.81.33.5.1.1.3 | ColumnatmSwchSlotRouteNextId | read-only | mandatory | The next available Route index in this Slot. The value of this object can be used as the index by the network manager to create an entry in the atmSwchSlotRout… |
| 1.3.6.1.4.1.81.33.5.1.1.4 | ColumnatmSwchSlotAPSMode | read-only | mandatory | The operation mode of APS. Uni-directional: The uni-directional mode provides protection in one direction. Non-revertive: When the condition that caused a swit… |
| 1.3.6.1.4.1.81.33.5.1.1.5 | ColumnatmSwchSlotAPSCurrentState | read-only | mandatory | Current state of APS. Sd A signal degrade condition is in effect. Sf A signal failure condition is in effect. Forced switched The current APS transmitting link… |
| 1.3.6.1.4.1.81.33.5.1.1.6 | ColumnatmSwchSlotAPSSwitchCommand | read-write | mandatory | Allows the initiation of an APS switch command. The Switch command values are: noCmd(1) This value should be returned by a read request when no switch Command … |
| 1.3.6.1.4.1.81.33.5.1.1.7 | ColumnatmSwchSlotAPSSFBerThreshold | read-only | mandatory | The Signal Failure Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER… |
| 1.3.6.1.4.1.81.33.5.1.1.8 | ColumnatmSwchSlotAPSSDBerThreshold | read-write | mandatory | The Signal Degrade Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER… |
| 1.3.6.1.4.1.81.33.5.1.1.9 | ColumnatmSwchSlotAPSDecision | read-only | mandatory | APS Decision. The receiving link can be either the working link or the protection link. When both links are down, Not-active value is returned. |
| 1.3.6.1.4.1.81.33.6 | NodeatmSwchPort | |||
| 1.3.6.1.4.1.81.33.6.1 | TableatmSwchPortTable | not-accessible | mandatory | A table containing information about all the physical ports on the switch. Indexed on atmSwchSlotIndex and atmSwchPortIndex. |
| 1.3.6.1.4.1.81.33.6.1.1 | RowatmSwchPortEntry | not-accessible | mandatory | An entry containing information about a port on a particular card in the switch. |
| 1.3.6.1.4.1.81.33.6.1.1.1 | ColumnatmSwchPortIndex | read-only | mandatory | The index of this port within the card. |
| 1.3.6.1.4.1.81.33.6.1.1.2 | ColumnatmSwchPortRootVportIndex | read-only | mandatory | The index of the root vport in the vport table. |
| 1.3.6.1.4.1.81.33.6.1.1.3 | ColumnatmSwchPortNumVPorts | read-only | mandatory | The count of the number of Vports on this physical port. |
| 1.3.6.1.4.1.81.33.6.1.1.4 | ColumnatmSwchPortPayloadScramble | read-write | mandatory | Payload Scramble for a port. |
| 1.3.6.1.4.1.81.33.6.1.1.5 | ColumnatmSwchPortPhysicalType | read-write | mandatory | This variable identifies whether a SONET or a SDH signal is used across this interface. |
| 1.3.6.1.4.1.81.33.6.1.1.6 | ColumnatmSwchPortMaxTxRate | read-write | mandatory | The Maximum transmit rate (in 1000bits per second) for that port. |
| 1.3.6.1.4.1.81.33.6.1.1.7 | ColumnatmSwchPortSvcPtPtInConns | read-only | mandatory | The number of switched virtual point to point connections through this port, where this port is the point of entry for the call setup. |
| 1.3.6.1.4.1.81.33.6.1.1.8 | ColumnatmSwchPortSvcPtPtOutConns | read-only | mandatory | The number of switched virtual point to point connections through this port, where this port is the point of exit for the call setup. |
| 1.3.6.1.4.1.81.33.6.1.1.9 | ColumnatmSwchPortSvcPtMptRootConns | read-only | mandatory | The number of switched virtual point to multipoint connections through this port, where this port is the point of entry for the call setup. |
| 1.3.6.1.4.1.81.33.6.1.1.10 | ColumnatmSwchPortSvcPtMptLeafConns | read-only | mandatory | The number of switched virtual point to multipoint connections through this port, where this port is the point of exit for the call setup. |
| 1.3.6.1.4.1.81.33.6.1.1.11 | ColumnatmSwchPortPvcPtPtConns | read-only | mandatory | The number of permanent virtual point to point connections through this port. |
| 1.3.6.1.4.1.81.33.6.1.1.12 | ColumnatmSwchPortPvcPtMptRootConns | read-only | mandatory | The number of permanent virtual point to multipoint connections through this port, where this port is the point of entry for the call setup. |
| 1.3.6.1.4.1.81.33.6.1.1.13 | ColumnatmSwchPortPvcPtMptLeafConns | read-only | mandatory | The number of permanent virtual point to multipoint connections through this port, where this port is the point of exit for the call setup. |
| 1.3.6.1.4.1.81.33.6.1.1.14 | ColumnatmSwchPortPvpPtPtConns | read-only | mandatory | The number of permanent virtual point to point path connections through this port. |
| 1.3.6.1.4.1.81.33.6.1.1.15 | ColumnatmSwchPortPvpPtMptRootConns | read-only | mandatory | The number of permanent virtual point to multi-point root path connections through this port. |
| 1.3.6.1.4.1.81.33.6.1.1.16 | ColumnatmSwchPortPvpPtMptLeafConns | read-only | mandatory | The number of permanent virtual point to multi-point leaf path connections through this port. |
| 1.3.6.1.4.1.81.33.6.1.1.17 | ColumnatmSwchPortdsx3CellMaping | read-write | mandatory | This variable describes two different mapping schemes for transporting ATM cells over DS3 transmission systems: a PLCP-based system and a direct mapping system… |
| 1.3.6.1.4.1.81.33.7 | NodeatmSwchVPort | |||
| 1.3.6.1.4.1.81.33.7.1 | TableatmSwchVPortTable | not-accessible | mandatory | A table containing information about all the virtual ports on the switch. Indexed on atmSwchSlotIndex, atmSwchPortIndex and atmSwchVPortIndex. |
| 1.3.6.1.4.1.81.33.7.1.1 | RowatmSwchVPortEntry | not-accessible | mandatory | An entry containing information about a VPort on a particular card in a switch. |
| 1.3.6.1.4.1.81.33.7.1.1.1 | ColumnatmSwchVPortIndex | read-only | mandatory | The index of this vport within the card/port. This is defined as being the vport identifier + 1. |
| 1.3.6.1.4.1.81.33.7.1.1.2 | ColumnatmSwchVPortIsRoot | read-only | mandatory | Indicates whether this Vport is the root vport on a given physical port. |
| 1.3.6.1.4.1.81.33.7.1.1.3 | ColumnatmSwchVPortAdminStatus | read-write | mandatory | The admin state of this interface. Note that an interface must be down in order to change the configuration of that interface. |
| 1.3.6.1.4.1.81.33.7.1.1.4 | ColumnatmSwchVPortOperStatus | read-only | mandatory | The operational state of this interface. Note that an interface must be down in order to change the configuration of that interface. |
| 1.3.6.1.4.1.81.33.7.1.1.5 | ColumnatmSwchVPortCurrentSignallingState | read-only | mandatory | The state of the signalling stack for this interface. |
| 1.3.6.1.4.1.81.33.7.1.1.6 | ColumnatmSwchVPortCurrentILMIState | read-only | mandatory | The current state of the ILMI link for this port. stack_off means the ILMI link is up but the protocol stack that retrieves neighbor information is off. |
| 1.3.6.1.4.1.81.33.7.1.1.7 | ColumnatmSwchVPortCurrentAddrRegEn | read-only | mandatory | Indicates whether address registration is enabled on this interface. |
| 1.3.6.1.4.1.81.33.7.1.1.8 | ColumnatmSwchVPortCurrentLinkType | read-only | mandatory | The type of signalling used on this interface. |
| 1.3.6.1.4.1.81.33.7.1.1.9 | ColumnatmSwchVPortCurrentTermType | read-only | mandatory | The type of link termination currently in use at this interface. |
| 1.3.6.1.4.1.81.33.7.1.1.10 | ColumnatmSwchVPortConfigILMIState | read-write | mandatory | The configured state of the ILMI protocol stack. |
| 1.3.6.1.4.1.81.33.7.1.1.11 | ColumnatmSwchVPortConfigAddrRegEn | read-write | mandatory | Indicates whether address registration is to be performed on this interface. |
| 1.3.6.1.4.1.81.33.7.1.1.12 | ColumnatmSwchVPortConfigLinkType | read-write | mandatory | The configured type of signalling used on this interface. Attempts to set the unknown state will be rejected. |
| 1.3.6.1.4.1.81.33.7.1.1.13 | ColumnatmSwchVPortConfigTermType | read-write | mandatory | The type of link termination configured for use at this interface. |
| 1.3.6.1.4.1.81.33.7.1.1.14 | ColumnatmSwchVPortNeighbourSysName | read-only | mandatory | The sysName for the device at the remote end of the link to this interface. |
| 1.3.6.1.4.1.81.33.7.1.1.15 | ColumnatmSwchVPortNeighbourUNIVersion | read-only | mandatory | The highest version of stack type usable by the interface at the remote end of the link to this interface. |
| 1.3.6.1.4.1.81.33.7.1.1.16 | ColumnatmSwchVPortNeighbourATMAddress | read-only | mandatory | The ifPhysAddress used by the interface at the remote end of the link to this interface. |
| 1.3.6.1.4.1.81.33.7.1.1.17 | ColumnatmSwchVPortNeighbourIfName | read-only | mandatory | The ifName used by the interface at the remote end of the link to this interface. |
| 1.3.6.1.4.1.81.33.7.1.1.18 | ColumnatmSwchVPortMibProbe | read-write | mandatory | Whether the ability to find out proprietary features via the probe MIB (ILMI extensions) is switched on or off. |
| 1.3.6.1.4.1.81.33.7.1.1.19 | ColumnatmSwchVPortConfMinSvccVci | read-write | mandatory | The minimum VCI that the signalling stack on the vport is configured to support for allocation to switched virtual channel connections. |
| 1.3.6.1.4.1.81.33.7.1.1.20 | ColumnatmSwchVPortConfMaxSvccVci | read-write | mandatory | The maximum VCI that the signalling stack on the vport is configured to support for allocation to switched virtual channel connections. |
| 1.3.6.1.4.1.81.33.7.1.1.21 | ColumnatmSwchVPortConfMinVpi | read-write | mandatory | The minimum VPI available for use by any connection on this virtual port. Curently, this is always 0 for the root vport, while non-root vports take a value gre… |
| 1.3.6.1.4.1.81.33.7.1.1.22 | ColumnatmSwchVPortConfMaxVpi | read-write | mandatory | The maximum VPI available for use by any connection on this virtual port. Curently possible values are: 0, 1, 3 and 7, For Non-root vports MinVpi==MaxVpi. |
| 1.3.6.1.4.1.81.33.7.1.1.23 | ColumnatmSwchVPortNeighbourIpAddress | read-only | mandatory | The IP address used by the interface at the remote end of the link to this interface. |
| 1.3.6.1.4.1.81.33.7.1.1.24 | ColumnatmSwchVPortPcr | read-write | mandatory | The Peak Cell Rate (in 1000bits per second) for that Vport. Available only for non-root Vports. The root-vport will always return the value of 0 |
| 1.3.6.1.4.1.81.33.7.1.1.25 | ColumnatmSwchVPortRowStatus | read-write | mandatory | This object is used to create, delete or modify a row in this table. To create a new Vport, this object is initially set to 'createAndWait' or 'createAndGo'. T… |
| 1.3.6.1.4.1.81.33.8 | NodeatmSwchSlotRoute | |||
| 1.3.6.1.4.1.81.33.8.1 | TableatmSwchSlotRouteTable | not-accessible | mandatory | a list of ATM routing table addresses |
| 1.3.6.1.4.1.81.33.8.1.1 | RowatmSwchSlotRouteEntry | not-accessible | mandatory | ATM address routing entry: ATM Address to Port |
| 1.3.6.1.4.1.81.33.8.1.1.1 | ColumnatmSwchSlotRouteId | read-only | mandatory | Unique identifier for this row. This value will always match the OID leaf value. |
| 1.3.6.1.4.1.81.33.8.1.1.2 | ColumnatmSwchSlotRouteRowStatus | read-write | mandatory | This objest is used to create or delete entries in the atmSwchSlotRouteTable. See Textual Convention in RFC 1903. Next available index is: atmSwchSlotRouteNext… |
| 1.3.6.1.4.1.81.33.8.1.1.3 | ColumnatmSwchSlotRouteAddressPrefix | read-write | mandatory | The ATM address to be used for routing. |
| 1.3.6.1.4.1.81.33.8.1.1.4 | ColumnatmSwchSlotRoutePrefixLength | read-write | mandatory | The number of bits used in the Address Prefix |
| 1.3.6.1.4.1.81.33.8.1.1.5 | ColumnatmSwchSlotRoutePriority | read-write | mandatory | The priority of this route entry (not used at this time) |
| 1.3.6.1.4.1.81.33.8.1.1.6 | ColumnatmSwchSlotRouteSlot | read-write | mandatory | Identifier for the slot used by the route |
| 1.3.6.1.4.1.81.33.8.1.1.7 | ColumnatmSwchSlotRoutePort | read-write | mandatory | Identifier for the port on the above slot to be used by the route |
| 1.3.6.1.4.1.81.33.8.1.1.8 | ColumnatmSwchSlotRouteVport | read-write | mandatory | Identifier for the virtual port on the above port to be used by the route. |
| 1.3.6.1.4.1.81.33.8.1.1.9 | ColumnatmSwchSlotRouteOrigin | read-only | mandatory | Indicates origin of route |
| 1.3.6.1.4.1.81.33.8.1.1.10 | ColumnatmSwchSlotRouteOperStatus | read-only | mandatory | Indication of route's operational status |
| 1.3.6.1.4.1.81.33.9 | NodeatmSwchSlotAddrVcl | |||
| 1.3.6.1.4.1.81.33.9.1 | TableatmSwchSlotAddrVclTable | not-accessible | mandatory | This table provides an alternative way to retrieve the atmVclTable. This table can be used to retrieve the indexing to the atmVclTable by an ATM address. Based… |
| 1.3.6.1.4.1.81.33.9.1.1 | RowatmSwchSlotAddrVclEntry | not-accessible | mandatory | Each entry in this table represents an entry in the atmVclTable of the ATM-MIB by its ATM address. The ATM address is either the calling or called party ATM ad… |
| 1.3.6.1.4.1.81.33.9.1.1.1 | ColumnatmSwchSlotAddrVclAddr | read-only | mandatory | An ATM address on one end of the VCL. |
| 1.3.6.1.4.1.81.33.9.1.1.2 | ColumnatmSwchSlotAddrVclAtmIfIndex | read-only | mandatory | The interface index of the ATM interface to which this VCL pertains. This object combined with the atmAddrVclVpi and atmAddrVclVci objects serves as an index t… |
| 1.3.6.1.4.1.81.33.9.1.1.3 | ColumnatmSwchSlotAddrVclVpi | read-only | mandatory | The VPI value of the VCL. This object combined with the atmAddrVclAtmIfIndex and atmAddrVclVci objects serves as an index to the atmVclTable. |
| 1.3.6.1.4.1.81.33.9.1.1.4 | ColumnatmSwchSlotAddrVclVci | read-only | mandatory | The VCI value of the VCL. This object combined with the atmAddrVclAtmIfIndex and atmAddrVclVpi objects serves as an index to the atmVclTable. |
| 1.3.6.1.4.1.81.33.9.1.1.5 | ColumnatmSwchSlotAddrVclAddrType | read-only | mandatory | The type of ATM Address represented by the object atmVclAddrAddr. Choices are either calling party address or called party address. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmAddress | OCTET STRING (SIZE(20)) | ||
| AtmPrefix | OCTET STRING (SIZE(13)) |