ATSWTCH2-MIB
200 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207 | NodealliedTelesyn | |||
| 1.3.6.1.4.1.207.1 | NodeatiProduct | |||
| 1.3.6.1.4.1.207.8 | NodemibObject | |||
| 1.3.6.1.4.1.207.8.10 | NodeatswitchMib | |||
| 1.3.6.1.4.1.207.8.10.1 | NodeatswitchSysGroup | |||
| 1.3.6.1.4.1.207.8.10.1.1 | ScalaratswitchProductType | read-only | mandatory | This object will return Product Type. |
| 1.3.6.1.4.1.207.8.10.1.2 | ScalaratswitchEthernetPortCount | read-only | mandatory | This object will return the number of 10/100 Mbps Ethernet ports on the switch. |
| 1.3.6.1.4.1.207.8.10.1.3 | ScalaratswitchReset | read-write | mandatory | Setting this object to 'switch-reset' will cause the switch to perform a hardware reset within approximately 4-6 seconds. Setting this object to 'switch-no-res… |
| 1.3.6.1.4.1.207.8.10.1.4 | ScalaratswitchMDA1Type | read-only | mandatory | This object returns the MDA type of the Uplink port |
| 1.3.6.1.4.1.207.8.10.1.5 | ScalaratswitchMDA2Type | read-only | mandatory | This Object is supported in 81XX product line only. This object returns the MDA type of the Uplink Port named 'B'. It returns 'none' if a 'B' MDA slot is not i… |
| 1.3.6.1.4.1.207.8.10.1.6 | ScalaratswitchDeviceFlowControl | read-write | mandatory | This Object is supported on 81XX products only. This object configures the Flow Control of the Device |
| 1.3.6.1.4.1.207.8.10.1.7 | NodeatswitchSwGroup | |||
| 1.3.6.1.4.1.207.8.10.1.7.1 | ScalaratswitchSwProduct | read-only | mandatory | Identifies the software product the device is running. |
| 1.3.6.1.4.1.207.8.10.1.7.2 | ScalaratswitchSwVersion | read-only | mandatory | Identifies the version number of the present release. |
| 1.3.6.1.4.1.207.8.10.1.8 | NodeatswitchIpGroup | |||
| 1.3.6.1.4.1.207.8.10.1.8.1 | ScalaratswitchCurrentIpAddress | read-only | mandatory | The Current IP address is the one which is currently used and is obtained dynamically through one of the protocols interaction.( DHCP or Bootp.) This address i… |
| 1.3.6.1.4.1.207.8.10.1.8.2 | ScalaratswitchConfiguredIpAddress | read-write | mandatory | The Configured IP address of the device. This is the address configured through Network or Local Omega. |
| 1.3.6.1.4.1.207.8.10.1.8.3 | ScalaratswitchConfiguredSubnetMask | read-write | mandatory | The Configured Subnet Mask of the device. |
| 1.3.6.1.4.1.207.8.10.1.8.4 | ScalaratswitchConfiguredRouter | read-write | mandatory | The Configured Gateway/Router address of the device |
| 1.3.6.1.4.1.207.8.10.1.8.5 | ScalaratswitchIPAddressStatus | read-only | mandatory | The IP Address can be obtained/configured by any of the above different ways. This object specifies how IP address currently on the switch Box, was configured/… |
| 1.3.6.1.4.1.207.8.10.1.8.6 | ScalaratswitchDNServer | read-write | mandatory | The Configured DNS Server address of the device |
| 1.3.6.1.4.1.207.8.10.1.8.7 | ScalaratswitchDefaultDomainName | read-write | mandatory | This Object defines the Default Domain where this switch can be belong to. |
| 1.3.6.1.4.1.207.8.10.1.9 | NodeatswitchNMGroup | |||
| 1.3.6.1.4.1.207.8.10.1.9.1 | TableatswitchNwMgrTable | not-accessible | mandatory | A list of SNMP Trap Manager stations Entries. The number of entries is given by the switchNwMgrTotal mib object. |
| 1.3.6.1.4.1.207.8.10.1.9.1.1 | RowatswitchNwMgrEntry | not-accessible | mandatory | Trap receipt Manager Entry containing ipaddress of the configured NMS's to which Traps are sent. |
| 1.3.6.1.4.1.207.8.10.1.9.1.1.1 | ColumnatswitchNwMgrIndex | read-only | mandatory | The Index of the Managers Ip address. |
| 1.3.6.1.4.1.207.8.10.1.9.1.1.2 | ColumnatswitchNwMgrIpAddr | read-write | mandatory | The IP Address of the NMS host configured. |
| 1.3.6.1.4.1.207.8.10.2 | NodeatswitchConfigGroup | |||
| 1.3.6.1.4.1.207.8.10.2.1 | ScalaratswitchPortDisableOnSecurityViolation | read-write | mandatory | This System wide attribute allows the port to be disabled on Violation of the Security. or suspend the port due to Duplicate Address. Needs More explaination a… |
| 1.3.6.1.4.1.207.8.10.2.2 | ScalaratswitchMirroringSourcePort | read-write | mandatory | This is the Source port number for which there is another mirror port.If the atswitchEthConfigMirrorState is Enabled then ,the mirror portgets routed with all … |
| 1.3.6.1.4.1.207.8.10.2.3 | ScalaratswitchMirrorState | read-write | mandatory | if the state of Mirroring is enabled by selecting one of the first three values , then the Mirroring explained above works. If disabled, port operation works n… |
| 1.3.6.1.4.1.207.8.10.2.4 | ScalaratswitchMirroringDestinationPort | read-write | mandatory | This is the Destination port number for which there is another mirror port.If the atswitchEthConfigMirrorState is Enabled then ,the mirror portgets routed with… |
| 1.3.6.1.4.1.207.8.10.2.5 | ScalaratswitchSecurityConfig | read-write | mandatory | This Object is suppported only in 37XX product Line. Security feature configuration Object. The Security disable would let the device carry on the learn-new-ad… |
| 1.3.6.1.4.1.207.8.10.2.6 | ScalaratswitchSecurityAction | read-write | mandatory | Security Action to be carried when the atswitchSecurityConfig is enabled-with-learning-locked or limted-enabled. |
| 1.3.6.1.4.1.207.8.10.2.7 | ScalaratswitchDebugAvailableBytes | read-only | mandatory | This is strictly for Debug reason and this object should not be beleived as the correct number |
| 1.3.6.1.4.1.207.8.10.2.8 | ScalaratswitchTrunkConfig | read-write | mandatory | This Object Configures the Trunking for the Uplink Ports only. This feature is currently available only in Fenix 37XX-XL hardware. |
| 1.3.6.1.4.1.207.8.10.3 | NodeatswitchPortConfigGroup | |||
| 1.3.6.1.4.1.207.8.10.3.1 | TableatswitchPortTable | not-accessible | mandatory | Table of basic port configuration information. |
| 1.3.6.1.4.1.207.8.10.3.1.1 | RowatswitchPortEntry | not-accessible | mandatory | An entry in the port config table. |
| 1.3.6.1.4.1.207.8.10.3.1.1.1 | ColumnatswitchPortNumber | read-only | mandatory | This object identifies the port of the switch. |
| 1.3.6.1.4.1.207.8.10.3.1.1.2 | ColumnatswitchPortName | read-write | mandatory | This attribute associates a user defined string name with the port. |
| 1.3.6.1.4.1.207.8.10.3.1.1.3 | ColumnatswitchPortAutosenseOrHalfDuplex | read-write | mandatory | This attribute allows an administrative request to configure whether this port can Autosense or Force the Half Duplex |
| 1.3.6.1.4.1.207.8.10.3.1.1.4 | ColumnatswitchPortLinkState | read-only | mandatory | This attribute allows an administrative request to read the status of link state on this port. |
| 1.3.6.1.4.1.207.8.10.3.1.1.5 | ColumnatswitchPortDuplexStatus | read-only | mandatory | This attribute allows an administrative request to read the status of Duplex on this port. |
| 1.3.6.1.4.1.207.8.10.3.1.1.6 | ColumnatswitchPortSpeed | read-write | mandatory | This attribute allows an administrative request to read/write the speed of this port. This attribure is read-only for all the Ports on AT-37XX product . This A… |
| 1.3.6.1.4.1.207.8.10.3.1.1.7 | ColumnatswitchPortState | read-write | mandatory | This attribute allows an administrative request to disable or enable communications on this port.It also responds with the status of the port .Except enabled(1… |
| 1.3.6.1.4.1.207.8.10.3.1.1.8 | ColumnatswitchPortTransmitPacingConfig | read-write | mandatory | This Object is supported on AT36XX product line Only. This attribute allows the transmit Pacing to be enabled or disabled. |
| 1.3.6.1.4.1.207.8.10.3.1.1.9 | ColumnatswitchPortSTPConfig | read-write | mandatory | This attribute allows a bridging Mode to be configured with either Spanning Tree enabled or disabled. When Spanning tree is enabled, make sure that this port i… |
| 1.3.6.1.4.1.207.8.10.3.1.1.10 | ColumnatswitchPortBridgeid | read-write | mandatory | The Bridge to which this port belongs to . |
| 1.3.6.1.4.1.207.8.10.3.1.1.11 | ColumnatswitchPortSTPCost | read-write | mandatory | The Cost of the Spanning Tree Protocol.This object is valid only when STP is enabled. |
| 1.3.6.1.4.1.207.8.10.3.1.1.12 | ColumnatswitchPortSTPPriority | read-write | mandatory | The Priority of the spanning Tree Protocol. This object is valid when STP is enabled. |
| 1.3.6.1.4.1.207.8.10.3.1.1.13 | ColumnatswitchPortSwitchingType | read-write | mandatory | This per-port attribute describes whether the port identified by atswitchPortNumber uses store-and-forward bridging for local switched Ethernet packets or cut-… |
| 1.3.6.1.4.1.207.8.10.3.1.1.14 | ColumnatswitchPortFlowControlEnable | read-write | deprecated | This Per_port attribute is only for ATS21 product.(81XX). This per-port attribute describes whether the port identified has flow Control Enabled or not. Flow C… |
| 1.3.6.1.4.1.207.8.10.3.1.1.15 | ColumnatswitchPortSecurityNumberOfAddresses | read-write | mandatory | This object configures the Max number of addresses at an instance to be learnt by the device. If the learnt addresses number is above this number, then the ats… |
| 1.3.6.1.4.1.207.8.10.4 | NodeatswitchVlanConfigGroup | |||
| 1.3.6.1.4.1.207.8.10.4.1 | TableatswitchBasicVlanTable | not-accessible | mandatory | Table of Virtual LAN configured. |
| 1.3.6.1.4.1.207.8.10.4.1.1 | RowatswitchBasicVlanEntry | not-accessible | mandatory | An entry in the table, containing VLAN information. |
| 1.3.6.1.4.1.207.8.10.4.1.1.1 | ColumnatswitchBeVlanIndex | read-only | mandatory | This object identifies the VLAN. |
| 1.3.6.1.4.1.207.8.10.4.1.1.2 | ColumnatswitchBeVlanName | read-write | mandatory | This attribute associates a user defined string with the Virtual LAN. To configure a new VLAN, do 'set' operation on this object with the VLAN name. To delete … |
| 1.3.6.1.4.1.207.8.10.4.1.1.3 | ColumnatswitchBeVlanTagId | read-write | mandatory | This object is supported by 37xx series of fenix with the VLAN tagging capability hardware only. Please check whether the SysObjectId is greater than 29. This … |
| 1.3.6.1.4.1.207.8.10.4.1.1.4 | ColumnatswitchBeVlanPortMask | read-write | mandatory | This object is supported by 37xx series of fenix with the VLAN tagging capability hardware only. Please check whether the SysObjectId is greater than 29. This … |
| 1.3.6.1.4.1.207.8.10.4.1.1.5 | ColumnatswitchBeVlanRowStatus | read-write | mandatory | This object is supported by 37xx series of fenix with the VLAN tagging capability hardware only. Please check whether the SysObjectId is greater than 29. This … |
| 1.3.6.1.4.1.207.8.10.4.2 | TableatswitchPort2VlanTable | not-accessible | mandatory | Table of per port Virtual LAN configuration. |
| 1.3.6.1.4.1.207.8.10.4.2.1 | RowatswitchPort2VlanEntry | not-accessible | mandatory | An entry in the table, containing per port VLAN information. |
| 1.3.6.1.4.1.207.8.10.4.2.1.1 | ColumnatswitchPvPortNumber | read-only | mandatory | This object identifies the port on the switch. |
| 1.3.6.1.4.1.207.8.10.4.2.1.2 | ColumnatswitchPvVlanName | read-write | mandatory | This attribute associates a user defined string with the Virtual LAN. This Object is the same as atswitchBeVlanName. Please make sure to give the same string a… |
| 1.3.6.1.4.1.207.8.10.5 | NodeatswitchEthernetStatsGroup | |||
| 1.3.6.1.4.1.207.8.10.5.1 | NodeatswitchEthMonStats | |||
| 1.3.6.1.4.1.207.8.10.5.1.1 | ScalaratswitchEthMonRxGoodFrames | read-only | mandatory | The total number of Good Frames received on this module. |
| 1.3.6.1.4.1.207.8.10.5.1.2 | ScalaratswitchEthMonTxGoodFrames | read-only | mandatory | The total number of Good Frames Transmitted by this module. |
| 1.3.6.1.4.1.207.8.10.5.1.3 | ScalaratswitchEthMonTxTotalBytes | read-only | mandatory | The total number of Bytes transmitted from this module. |
| 1.3.6.1.4.1.207.8.10.5.1.4 | ScalaratswitchEthMonTxDeferred | read-only | mandatory | This is the count of first time Transmission attempt which failed on an interface due to medium being busy. |
| 1.3.6.1.4.1.207.8.10.5.1.5 | ScalaratswitchEthMonTxCollisions | read-only | mandatory | The total number of collisions while switching on an interface. |
| 1.3.6.1.4.1.207.8.10.5.2 | NodeatswitchEthErrorStats | |||
| 1.3.6.1.4.1.207.8.10.5.2.1 | ScalaratswitchEthErrorCRC | read-only | mandatory | The total number of CRC errors on received packets. |
| 1.3.6.1.4.1.207.8.10.5.2.2 | ScalaratswitchEthErrorAlignment | read-only | mandatory | The total number of packets received that has alignment errors |
| 1.3.6.1.4.1.207.8.10.5.2.3 | ScalaratswitchEthErrorRxBadFrames | read-only | mandatory | The counter is incremented when a bad frame was received. |
| 1.3.6.1.4.1.207.8.10.5.2.4 | ScalaratswitchEthErrorLateCollisions | read-only | mandatory | This object counts the number of times the collison was detected in the port. |
| 1.3.6.1.4.1.207.8.10.5.2.6 | ScalaratswitchEthErrorTxTotal | read-only | mandatory | Total number of error resulted from transfer operations. |
| 1.3.6.1.4.1.207.8.10.6 | NodeatswitchEthPortStatsGroup | |||
| 1.3.6.1.4.1.207.8.10.6.1 | NodeatswitchEthPortMonStats | |||
| 1.3.6.1.4.1.207.8.10.6.1.1 | TableatswitchEthPortMonTable | not-accessible | mandatory | A list of statistics entries. |
| 1.3.6.1.4.1.207.8.10.6.1.1.1 | RowatswitchEthPortMonEntry | not-accessible | mandatory | A collection of statistics kept for a particular port. |
| 1.3.6.1.4.1.207.8.10.6.1.1.1.1 | ColumnatswitchEthPortMonId | read-only | mandatory | The relative position of a port within a switch starting with 1. |
| 1.3.6.1.4.1.207.8.10.6.1.1.1.2 | ColumnatswitchEthPortMonTxTotalBytes | read-only | mandatory | The total number of Bytes transmited to this port. |
| 1.3.6.1.4.1.207.8.10.6.1.1.1.3 | ColumnatswitchRxGoodFrames | read-only | mandatory | The total number of good packets(including unicast,broadcast packets and multicast packets) received |
| 1.3.6.1.4.1.207.8.10.6.1.1.1.4 | ColumnatswitchTxGoodFrames | read-only | mandatory | The total number of good packets(including bad packets, broadcast packets and multicast packets) transmitted successfully |
| 1.3.6.1.4.1.207.8.10.6.1.1.1.5 | ColumnatswitchTxBroadcastFrames | read-only | mandatory | The total number of packets transmitted that were directed to the broadcast address. This does not include multicast packets |
| 1.3.6.1.4.1.207.8.10.6.1.1.1.6 | ColumnatswitchTxMulticastFrames | read-only | mandatory | The total number of packets transmitted that were directed to a multicast address. This does not include packets addressed to the broadcast address |
| 1.3.6.1.4.1.207.8.10.6.1.1.1.7 | ColumnatswitchAddrDuplicate | read-only | mandatory | The number of address duplications seen on this port which is secured on another port. If a source address is locked for a port and if that address is eeen as … |
| 1.3.6.1.4.1.207.8.10.6.1.1.1.8 | ColumnatswitchAddrMismatches | read-only | mandatory | Address mismatches /address changes the sum of : 1. The number of mismatches seen on a port between a securely assigned port address and the source address obs… |
| 1.3.6.1.4.1.207.8.10.6.1.1.1.9 | ColumnatswitchRxOverruns | read-only | mandatory | The number of frames lost due to lack of resources during frame reception. The counter is incremented when frame data cannot enter the RX fifo for whatever rea… |
| 1.3.6.1.4.1.207.8.10.6.2 | NodeatswitchEthPortError | |||
| 1.3.6.1.4.1.207.8.10.6.2.1 | TableatswitchEthPortErrorTable | not-accessible | mandatory | A list of statistics entries. |
| 1.3.6.1.4.1.207.8.10.6.2.1.1 | RowatswitchEthPortErrorEntry | not-accessible | mandatory | A collection of statistics kept for a particular port. |
| 1.3.6.1.4.1.207.8.10.6.2.1.1.1 | ColumnatswitchEthPortErrorId | read-only | mandatory | The relative position of a port within a switch starting with 1. |
| 1.3.6.1.4.1.207.8.10.6.2.1.1.2 | ColumnatswitchEthPortErrorRxBadFrames | read-only | mandatory | The counter is incremented when a bad frame was received on this port. |
| 1.3.6.1.4.1.207.8.10.6.2.1.1.3 | ColumnatswitchEthPortErrorTxTotal | read-only | mandatory | Total number of error resulted from transmit operations on this port. |
| 1.3.6.1.4.1.207.8.10.7 | NodeatswitchFwdVlanGroup | |||
| 1.3.6.1.4.1.207.8.10.7.1 | TableatswitchFwdVlanTable | not-accessible | mandatory | This tables lists Mac Addresses lexicographically from the forwarding table and also the information about the Vlan/Vlan which this MAC address belongs to. |
| 1.3.6.1.4.1.207.8.10.7.1.1 | RowatswitchFwdVlanEntry | not-accessible | mandatory | Entry in the atswitchFwdVlanTable. |
| 1.3.6.1.4.1.207.8.10.7.1.1.1 | ColumnatswitchFwdVlanMACAddr | read-only | mandatory | This object identifies the MAC Address associated with this entry. |
| 1.3.6.1.4.1.207.8.10.7.1.1.2 | ColumnatswitchFwdVlanVlanId | read-only | mandatory | This object identifies the Vlan/Vlan which MAC Address defined by the atswitchFwdMACAddr is associated with. |
| 1.3.6.1.4.1.207.8.10.7.1.1.3 | ColumnatswitchFwdVlanAge | read-only | mandatory | Current Age of the MACAddr in the Forwarding Table.It Starts with 0 and if not heard it increments to some value until it hears from it and if not heard before… |
| 1.3.6.1.4.1.207.8.10.7.1.1.4 | ColumnatswitchFwdVlanStatus | read-only | mandatory | The status of this entry. The meanings of the values are: inactive(1) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has n… |
| 1.3.6.1.4.1.207.8.10.7.1.1.5 | ColumnatswitchFwdVlanPort | read-only | mandatory | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of atswitchFwdVl… |
| 1.3.6.1.4.1.207.8.10.8 | NodeatswitchTrapAttrGroup | |||
| 1.3.6.1.4.1.207.8.10.8.1 | ScalaratswitchDuplicateMacAddress | not-accessible | mandatory | The Duplicate Mac address which is secured on atswitchSecurePortNumber. |
| 1.3.6.1.4.1.207.8.10.8.2 | ScalaratswitchIntruderMacAddress | not-accessible | mandatory | The Mac address of the Intruder as seen on port which is the the next object |
| 1.3.6.1.4.1.207.8.10.8.3 | ScalaratswitchSecuredPortNumber | not-accessible | mandatory | This is the Port number which has the duplicate Address as the secured address . |
| 1.3.6.1.4.1.207.8.10.9 | NodeatswitchBridgeMib | |||
| 1.3.6.1.4.1.207.8.10.9.1 | NodeatswitchBrBase | |||
| 1.3.6.1.4.1.207.8.10.9.1.1 | TableatswitchBrBaseTable | not-accessible | mandatory | Table of basic bridge information. |
| 1.3.6.1.4.1.207.8.10.9.1.1.1 | RowatswitchBrBaseEntry | not-accessible | mandatory | An entry in the atswitchBrBaseTable. |
| 1.3.6.1.4.1.207.8.10.9.1.1.1.1 | ColumnatswitchBrBaseLanId | read-only | mandatory | This object uniquely identifies the lan or Virtual lan. |
| 1.3.6.1.4.1.207.8.10.9.1.1.1.2 | ColumnatswitchBrBaseBridgeAddress | read-only | mandatory | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.207.8.10.9.1.1.1.3 | ColumnatswitchBrBaseNumPorts | read-only | mandatory | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.207.8.10.9.1.1.1.4 | ColumnatswitchBrBaseType | read-only | mandatory | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.4.1.207.8.10.9.1.4 | TableatswitchBrBasePortTable | not-accessible | mandatory | A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included. |
| 1.3.6.1.4.1.207.8.10.9.1.4.1 | RowatswitchBrBasePortEntry | not-accessible | mandatory | A list of information for each port of the bridge. |
| 1.3.6.1.4.1.207.8.10.9.1.4.1.1 | ColumnatswitchBrBasePortLanId | read-only | mandatory | This object uniquely identifies the lan or Virtual lan. |
| 1.3.6.1.4.1.207.8.10.9.1.4.1.2 | ColumnatswitchBrBasePort | read-only | mandatory | The port number of the port for which this entry contains bridge management information. |
| 1.3.6.1.4.1.207.8.10.9.1.4.1.3 | ColumnatswitchBrBasePortIfIndex | read-only | mandatory | The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port. |
| 1.3.6.1.4.1.207.8.10.9.1.4.1.4 | ColumnatswitchBrBasePortCircuit | read-only | mandatory | For a port which (potentially) has the same value of atswitchBrBasePortIfIndex as another port on the same bridge, this object contains the name of an object i… |
| 1.3.6.1.4.1.207.8.10.9.1.4.1.5 | ColumnatswitchBrBasePortDelayExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.4.1.207.8.10.9.1.4.1.6 | ColumnatswitchBrBasePortMtuExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.4.1.207.8.10.9.2 | NodeatswitchBrStp | |||
| 1.3.6.1.4.1.207.8.10.9.2.1 | TableatswitchBrStpTable | not-accessible | mandatory | Table of bridge spanning tree information. |
| 1.3.6.1.4.1.207.8.10.9.2.1.1 | RowatswitchBrStpEntry | not-accessible | mandatory | An entry in the atswitchBrStpTable. |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.1 | ColumnatswitchBrStpLanId | read-only | mandatory | This object uniquely identifies the lan or Virtual lan. |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.2 | ColumnatswitchBrStpProtocolSpecification | read-only | mandatory | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.3 | ColumnatswitchBrStpPriority | read-write | mandatory | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID ar… |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.4 | ColumnatswitchBrStpTimeSinceTopologyChange | read-only | mandatory | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.5 | ColumnatswitchBrStpTopChanges | read-only | mandatory | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.6 | ColumnatswitchBrStpDesignatedRoot | read-only | mandatory | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.7 | ColumnatswitchBrStpRootCost | read-only | mandatory | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.8 | ColumnatswitchBrStpRootPort | read-only | mandatory | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.9 | ColumnatswitchBrStpMaxAge | read-only | mandatory | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.10 | ColumnatswitchBrStpHelloTime | read-only | mandatory | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.11 | ColumnatswitchBrStpHoldTime | read-only | mandatory | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.12 | ColumnatswitchBrStpForwardDelay | read-only | mandatory | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.13 | ColumnatswitchBrStpBridgeMaxAge | read-write | mandatory | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related … |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.14 | ColumnatswitchBrStpBridgeHelloTime | read-write | mandatory | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second.… |
| 1.3.6.1.4.1.207.8.10.9.2.1.1.15 | ColumnatswitchBrStpBridgeForwardDelay | read-write | mandatory | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is re… |
| 1.3.6.1.4.1.207.8.10.9.2.15 | TableatswitchBrStpPortTable | not-accessible | mandatory | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.4.1.207.8.10.9.2.15.1 | RowatswitchBrStpPortEntry | not-accessible | mandatory | A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
| 1.3.6.1.4.1.207.8.10.9.2.15.1.1 | ColumnatswitchBrStpPortLanId | read-only | mandatory | This object uniquely identifies the lan or Virtual lan. |
| 1.3.6.1.4.1.207.8.10.9.2.15.1.2 | ColumnatswitchBrStpPort | read-only | mandatory | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.207.8.10.9.2.15.1.3 | ColumnatswitchBrStpPortPriority | read-write | mandatory | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.207.8.10.9.2.15.1.4 | ColumnatswitchBrStpPortState | read-only | mandatory | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.207.8.10.9.2.15.1.5 | ColumnatswitchBrStpPortEnable | read-write | mandatory | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.207.8.10.9.2.15.1.6 | ColumnatswitchBrStpPortPathCost | read-write | mandatory | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.207.8.10.9.2.15.1.7 | ColumnatswitchBrStpPortDesignatedRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.207.8.10.9.2.15.1.8 | ColumnatswitchBrStpPortDesignatedCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.207.8.10.9.2.15.1.9 | ColumnatswitchBrStpPortDesignatedBridge | read-only | mandatory | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.207.8.10.9.2.15.1.10 | ColumnatswitchBrStpPortDesignatedPort | read-only | mandatory | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.207.8.10.9.2.15.1.11 | ColumnatswitchBrStpPortForwardTransitions | read-only | mandatory | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.207.8.10.9.3 | NodeatswitchBrTp | |||
| 1.3.6.1.4.1.207.8.10.9.3.1 | TableatswitchBrTpTable | not-accessible | mandatory | Table of transparent bridging information. |
| 1.3.6.1.4.1.207.8.10.9.3.1.1 | RowatswitchBrTpEntry | not-accessible | mandatory | An entry in the atswitchBrTpTable. |
| 1.3.6.1.4.1.207.8.10.9.3.1.1.1 | ColumnatswitchBrTpLanId | read-only | mandatory | This object uniquely identifies the lan or Virtual lan. |
| 1.3.6.1.4.1.207.8.10.9.3.1.1.2 | ColumnatswitchBrTpLearnedEntryDiscards | read-only | mandatory | The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the… |
| 1.3.6.1.4.1.207.8.10.9.3.1.1.3 | ColumnatswitchBrTpAgingTime | read-write | mandatory | The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds. |
| 1.3.6.1.4.1.207.8.10.9.3.3 | TableatswitchBrTpFdbTable | not-accessible | mandatory | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.4.1.207.8.10.9.3.3.1 | RowatswitchBrTpFdbEntry | not-accessible | mandatory | Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.207.8.10.9.3.3.1.1 | ColumnatswitchBrTpFdbLanId | read-only | mandatory | This object uniquely identifies the lan or Virtual lan. |
| 1.3.6.1.4.1.207.8.10.9.3.3.1.2 | ColumnatswitchBrTpFdbAddress | read-only | mandatory | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.207.8.10.9.3.3.1.3 | ColumnatswitchBrTpFdbPort | read-only | mandatory | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of atswitchBrTpF… |
| 1.3.6.1.4.1.207.8.10.9.3.3.1.4 | ColumnatswitchBrTpFdbStatus | read-only | mandatory | The status of this entry. The meanings of the values are: inactive(1) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has n… |
| 1.3.6.1.4.1.207.8.10.9.3.4 | TableatswitchBrTpPortTable | not-accessible | mandatory | A table that contains information about every port that is associated with this transparent bridge. |
| 1.3.6.1.4.1.207.8.10.9.3.4.1 | RowatswitchBrTpPortEntry | not-accessible | mandatory | A list of information for each port of a transparent bridge. |
| 1.3.6.1.4.1.207.8.10.9.3.4.1.1 | ColumnatswitchBrTpPortLanId | read-only | mandatory | This object uniquely identifies the lan or Virtual lan. |
| 1.3.6.1.4.1.207.8.10.9.3.4.1.2 | ColumnatswitchBrTpPort | read-only | mandatory | The port number of the port for which this entry contains Transparent bridging management information. |
| 1.3.6.1.4.1.207.8.10.9.3.4.1.3 | ColumnatswitchBrTpPortMaxInfo | read-only | mandatory | The maximum size of the INFO (non-MAC) field that this port will receive or transmit. |
| 1.3.6.1.4.1.207.8.10.9.3.4.1.4 | ColumnatswitchBrTpPortInFrames | read-only | mandatory | The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only coun… |
| 1.3.6.1.4.1.207.8.10.9.3.4.1.5 | ColumnatswitchBrTpPortOutFrames | read-only | mandatory | The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only … |
| 1.3.6.1.4.1.207.8.10.9.3.4.1.6 | ColumnatswitchBrTpPortInDiscards | read-only | mandatory | Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. |
| 1.3.6.1.4.1.207.8.10.10 | NodeatswitchStaticMACGroup | |||
| 1.3.6.1.4.1.207.8.10.10.1 | TableatswitchStaticMACTable | not-accessible | mandatory | This tables lists Mac Addresses lexicographically from the Static table which binds MAC addresses to ports on the switch. |
| 1.3.6.1.4.1.207.8.10.10.1.1 | RowatswitchStaticMACEntry | not-accessible | mandatory | Entry in the atswitchStaticMACTable. |
| 1.3.6.1.4.1.207.8.10.10.1.1.1 | ColumnatswitchStaticMACAddress | read-only | mandatory | This object identifies the MAC Address associated with Static MAC Table. |
| 1.3.6.1.4.1.207.8.10.10.1.1.2 | ColumnatswitchStaticMACPortNumbers | read-write | mandatory | This object identifies the Ports for which the above MAC address is associated Statically in Static MAC Table. This Object could take the port numbers as the S… |
| 1.3.6.1.4.1.207.8.10.10.1.1.3 | ColumnatswitchStaticMACVlan | read-write | mandatory | The Static MAC Address to be added can also be confined to a Vlan also. If the Port does not belong to that Vlan. the Port is forced to be moved to that Vlan. |
| 1.3.6.1.4.1.207.8.10.12 | NodeatswitchPortMacAddrGroup | |||
| 1.3.6.1.4.1.207.8.10.12.1 | TableatswitchPortMACTable | not-accessible | mandatory | A table that contains information about unicast entries seen on ports. |
| 1.3.6.1.4.1.207.8.10.12.1.1 | RowatswitchPortMACEntry | not-accessible | mandatory | Information about a specific unicast MAC address seen on ports. |
| 1.3.6.1.4.1.207.8.10.12.1.1.1 | ColumnatswitchPortMACAddress | read-only | mandatory | A unicast MAC address seen on this port. |
| 1.3.6.1.4.1.207.8.10.12.1.1.2 | ColumnatswitchPortMACPort | read-only | mandatory | This object identifies the port on which the atswitchPortMACAddress was seen. |
| 1.3.6.1.4.1.207.8.10.13 | NodeatswitchDebugMallocLogGroup | |||
| 1.3.6.1.4.1.207.8.10.13.1 | TableatswitchDebugMallocLogTable | not-accessible | deprecated | Dont care. |
| 1.3.6.1.4.1.207.8.10.13.1.1 | RowatswitchMallocLogEntry | not-accessible | deprecated | Entry in the atswitchDebugMallocLogEntry. |
| 1.3.6.1.4.1.207.8.10.13.1.1.1 | ColumnatswitchDebugMallocLogIndex | read-only | deprecated | This is strictly for Debug reason and this object should not be beleived as the correct number. This log is useful for finding the memory leak which is stored … |
| 1.3.6.1.4.1.207.8.10.13.1.1.2 | ColumnatswitchDebugMallocLogCaller | read-only | deprecated | This is strictly for Debug reason and this object should not be beleived as the correct number. This log is useful for finding the memory leak which is stored … |
| 1.3.6.1.4.1.207.8.10.13.1.1.3 | ColumnatswitchDebugMallocLogAddress | read-only | deprecated | This is strictly for Debug reason and this object should not be beleived as the correct number. This log is useful for finding the memory leak which is stored … |
| 1.3.6.1.4.1.207.101 | NodenewRoot | The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new… | ||
| 1.3.6.1.4.1.207.102 | NodetopologyChange | A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding … | ||
| 1.3.6.1.4.1.207.105 | NodeintruderTrap | The intruderTrap trap indicates that there was a Intruder was detected on the port shown as ifIndex. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BridgeId | OCTET STRING (SIZE (8)) | ||
| MacAddress | OCTET STRING (SIZE (6)) | ||
| Timeout | INTEGER |