ATT-NETGATE-MIB
282 objects
The MIB module for the AT&T NetGate.
Imported Objects
| INET-ADDRESS-MIB | InetAddressIPv6 |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.74 | Nodeatt-2 | |||
| 1.3.6.1.4.1.74.1 | Nodeatt-products | |||
| 1.3.6.1.4.1.74.1.30 | NodeattNetGate | |||
| 1.3.6.1.4.1.74.1.30.1 | NodengHardwareInfo | |||
| 1.3.6.1.4.1.74.1.30.1.1 | ScalarnghwHardwareVersion | read-only | current | Hardware Version. |
| 1.3.6.1.4.1.74.1.30.1.2 | ScalarnghwCodeVersion | read-only | current | Software code version. |
| 1.3.6.1.4.1.74.1.30.1.3 | ScalarnghwAccount | read-only | current | The account in Service Manager this device is registered under. |
| 1.3.6.1.4.1.74.1.30.1.4 | ScalarnghwUtcOffset | read-only | current | Indicates how many minutes away from UTC time the device is located. Values must be in 30 minute increments. Valid range is -840 to 840. |
| 1.3.6.1.4.1.74.1.30.1.5 | ScalarnghwDstAllowed | read-only | current | Indicates if the device is located in an area that observes daylight savings time. |
| 1.3.6.1.4.1.74.1.30.1.6 | ScalarnghwDstActive | read-only | current | Indicates if daylight savings time is current active at this date and time. |
| 1.3.6.1.4.1.74.1.30.1.7 | ScalarnghwWanConnectionMethod | read-only | current | The current primary IPv4 WAN connection setting. This is configured via the web interface and is not read from Service Manager. |
| 1.3.6.1.4.1.74.1.30.1.8 | ScalarnghwHostname | read-only | current | The name of the current host. |
| 1.3.6.1.4.1.74.1.30.1.9 | NodenghwDnsServers | |||
| 1.3.6.1.4.1.74.1.30.1.9.1 | TablengDnsTable | not-accessible | current | The (conceptual) table of DNS on the device. An entry shall be placed in the storage table for each DNS. |
| 1.3.6.1.4.1.74.1.30.1.9.1.1 | RowngDnsEntry | not-accessible | current | A (conceptual) entry for one logical DNS area on the host. |
| 1.3.6.1.4.1.74.1.30.1.9.1.1.1 | ColumnngdnIndex | not-accessible | current | A unique value for each logical DNS contained on the device. |
| 1.3.6.1.4.1.74.1.30.1.9.1.1.2 | ColumnngdnServer | read-only | current | The IP address of an indivdual name server in use. |
| 1.3.6.1.4.1.74.1.30.1.9.2 | TablengDnsIPv6Table | not-accessible | current | The (conceptual) table of IPv6 DNS on the device. An entry shall be placed in the storage table for each DNS. |
| 1.3.6.1.4.1.74.1.30.1.9.2.1 | RowngDnsIPv6Entry | not-accessible | current | A (conceptual) entry for one logical IPv6 DNS area on the host. |
| 1.3.6.1.4.1.74.1.30.1.9.2.1.1 | ColumnngdnIPv6Index | not-accessible | current | A unique value for each logical IPv6 DNS contained on the device. |
| 1.3.6.1.4.1.74.1.30.1.9.2.1.2 | ColumnngdnIPv6Server | read-only | current | The IPv6 IP address of an indivdual name server in use. |
| 1.3.6.1.4.1.74.1.30.1.10 | ScalarnghwDeviceStatus | read-only | current | The current device status. |
| 1.3.6.1.4.1.74.1.30.1.11 | ScalarnghwLanguage | read-only | current | The language that will be displayed on the CGI web interface. The valid values are: EN = English JA = Japanese ES = Spanish BP = Brazil Portuguese FC = French … |
| 1.3.6.1.4.1.74.1.30.1.12 | NodenghwCustComm | |||
| 1.3.6.1.4.1.74.1.30.1.12.1 | TablengCustCommTable | not-accessible | current | The (conceptual) table of customer info (such as comments) on the device. An entry shall be placed in the storage table for each one. |
| 1.3.6.1.4.1.74.1.30.1.12.1.1 | RowngCustCommEntry | not-accessible | current | A (conceptual) entry for one logical customer comment area on the host. |
| 1.3.6.1.4.1.74.1.30.1.12.1.1.1 | ColumnngcuIndex | not-accessible | current | A unique value for each logical customer info. |
| 1.3.6.1.4.1.74.1.30.1.12.1.1.2 | ColumnngcuCustComment | read-only | current | A free-format field that can be added to the AT&T NetGate's profile at a customer's request. Currently only one comment field can be specified. |
| 1.3.6.1.4.1.74.1.30.1.13 | NodenghwPorts | |||
| 1.3.6.1.4.1.74.1.30.1.13.1 | TablengPortTable | not-accessible | current | The (conceptual) table of ports on the device. An entry shall be placed in the storage table for each port. |
| 1.3.6.1.4.1.74.1.30.1.13.1.1 | RowngPortEntry | not-accessible | current | A (conceptual) entry for one logical port area on the host. |
| 1.3.6.1.4.1.74.1.30.1.13.1.1.1 | ColumnngpoIndex | not-accessible | current | A unique value for each logical port contained on the device. |
| 1.3.6.1.4.1.74.1.30.1.13.1.1.2 | ColumnngpoStatus | read-only | current | The link status of an individual hardware port. |
| 1.3.6.1.4.1.74.1.30.1.14 | ScalarnghwCurrentWanConnectionMethod | read-only | current | The currently active IPv4 WAN connection, which may differ from the configured primary IPv4 WAN connection setting. For example, the primary IPv4 WAN is config… |
| 1.3.6.1.4.1.74.1.30.1.15 | ScalarnghwIPv6WanConnectionMethod | read-only | current | The current primary IPv6 WAN connection setting. This is configured via the web interface and is not read from Service Manager. |
| 1.3.6.1.4.1.74.1.30.1.16 | ScalarnghwIPv6CurrentWanConnectionMethod | read-only | current | The currently active IPv6 WAN connection, which may differ from the configured primary IPv6 WAN connection setting. For example, the primary IPv4 WAN is config… |
| 1.3.6.1.4.1.74.1.30.1.17 | ScalarnghwLastFullQueryTimeDAT | read-only | current | The last time when the AT&T NetGate was successfully able to retrieve its full profile from an AT&T Administration Server. |
| 1.3.6.1.4.1.74.1.30.1.18 | ScalarnghwLastAnyQueryTimeDAT | read-only | current | The last time when the AT&T NetGate was successfully able to retrieve its profile from an AT&T Administration Server. If this time does not match nghwLastFullQ… |
| 1.3.6.1.4.1.74.1.30.2 | NodengInterfaceInfo | |||
| 1.3.6.1.4.1.74.1.30.2.1 | ScalarngifActiveWanIface | read-only | current | The interface that is currently in use for the primary connection. |
| 1.3.6.1.4.1.74.1.30.2.2 | ScalarngifTotalBytesIn | read-only | current | Total bytes in on the active WAN interface. |
| 1.3.6.1.4.1.74.1.30.2.3 | ScalarngifTotalBytesOut | read-only | current | Total bytes out on the active WAN interface. |
| 1.3.6.1.4.1.74.1.30.2.4 | ScalarngifTimeInDial | read-only | current | How long the current dial connection has been up. |
| 1.3.6.1.4.1.74.1.30.3 | NodengVlanInfo | |||
| 1.3.6.1.4.1.74.1.30.3.1 | TablengVlanTable | not-accessible | current | The (conceptual) table of VLANs on the device. An entry shall be placed in the storage table for each VLAN. |
| 1.3.6.1.4.1.74.1.30.3.1.1 | RowngVlanEntry | not-accessible | current | A (conceptual) entry for one logical VLAN area on the host. |
| 1.3.6.1.4.1.74.1.30.3.1.1.1 | ColumnngvlIndex | not-accessible | current | A unique value for each logical VLAN contained by the device. |
| 1.3.6.1.4.1.74.1.30.3.1.1.2 | ColumnngvlId | read-only | current | This is the number assigned to the VLAN. Please note: A VLAN with an ID of 4070 is a special VLAN used to hold ports that are disabled. |
| 1.3.6.1.4.1.74.1.30.3.1.1.3 | ColumnngvlPorts | read-only | current | The ports assigned to the VLAN. |
| 1.3.6.1.4.1.74.1.30.3.1.1.4 | ColumnngvlSpeed | read-only | current | This is the speed supported on the Ethernet interfaces. |
| 1.3.6.1.4.1.74.1.30.3.1.1.5 | ColumnngvlIpRange | read-only | current | The range of IP addresses handed out via DHCP on this VLAN. Values will be 0.0.0.0 0.0.0.0 if DHCP is not enabled on this VLAN. Followed by number of addresses… |
| 1.3.6.1.4.1.74.1.30.3.1.1.6 | ColumnngvlDhcpRelayAddr | read-only | current | When the DHCP Type is 'R', this is the address the AT&T NetGate devices uses to relay DHCP requests. This field is required when the DHCP Type is 'R'. A second… |
| 1.3.6.1.4.1.74.1.30.3.1.1.7 | ColumnngvlDhcpDefRoute | read-only | current | This field is required when VRRP Active Indicator is 'Y' and is optional otherwise. If specified, it must be within the local LAN subnet of the AT&T NetGate bu… |
| 1.3.6.1.4.1.74.1.30.3.1.1.8 | ColumnngvlLanAddr | read-only | current | This is the LAN address for the device on the VLAN. |
| 1.3.6.1.4.1.74.1.30.3.1.1.9 | ColumnngvlLanSubAddr | read-only | current | This is the LAN subnet address for the device on the VLAN. |
| 1.3.6.1.4.1.74.1.30.3.1.1.10 | ColumnngvlIPv6IpRangeStart | read-only | current | The start of the range of IPv6 IP addresses handed out via DHCP on this VLAN. Value will be all zeroes if DHCP is not enabled on this VLAN. |
| 1.3.6.1.4.1.74.1.30.3.1.1.11 | ColumnngvlIPv6IpRangeEnd | read-only | current | The end of the range of IPv6 IP addresses handed out via DHCP on this VLAN. Value will be all zeroes if DHCP is not enabled on this VLAN. |
| 1.3.6.1.4.1.74.1.30.3.1.1.12 | ColumnngvlIPv6DhcpRelayAddrPri | read-only | current | When the DHCP Type is 'R', this is the primary address the AT&T NetGate devices uses to relay DHCP requests. This field is required when the DHCP Type is 'R' a… |
| 1.3.6.1.4.1.74.1.30.3.1.1.13 | ColumnngvlIPv6DhcpRelayAddrBak | read-only | current | When the DHCP Type is 'R', this is the primary address the AT&T NetGate devices uses to relay DHCP requests. |
| 1.3.6.1.4.1.74.1.30.3.1.1.14 | ColumnngvlIPv6LanAddr | read-only | current | This is the IPv6 LAN address for the device on the VLAN. |
| 1.3.6.1.4.1.74.1.30.3.1.1.15 | ColumnngvlIPv6LanPrefix | read-only | current | This is the IPv6 LAN prefix for the device on the VLAN. |
| 1.3.6.1.4.1.74.1.30.4 | NodengVrrpInfo | |||
| 1.3.6.1.4.1.74.1.30.4.1 | TablengVrrpTable | not-accessible | current | The (conceptual) table of VRRPs on the device. An entry shall be placed in the storage table for each VRRP. |
| 1.3.6.1.4.1.74.1.30.4.1.1 | RowngVrrpEntry | not-accessible | current | A (conceptual) entry for one logical VRRP area on the host. |
| 1.3.6.1.4.1.74.1.30.4.1.1.1 | ColumnngvrIndex | not-accessible | current | A unique value for each logical VRRP contained by the device. |
| 1.3.6.1.4.1.74.1.30.4.1.1.2 | ColumnngvrIface | read-only | current | The interface associated with this VRRP. |
| 1.3.6.1.4.1.74.1.30.4.1.1.3 | ColumnngvrId | read-only | current | Virtual router ID. |
| 1.3.6.1.4.1.74.1.30.4.1.1.4 | ColumnngvrMasterStatus | read-only | current | Shows what the status is (master, backup, not active). |
| 1.3.6.1.4.1.74.1.30.4.1.1.5 | ColumnngvrPriority | read-only | current | |
| 1.3.6.1.4.1.74.1.30.5 | Nodeng3GInfo | |||
| 1.3.6.1.4.1.74.1.30.5.1 | Tableng3GTable | not-accessible | current | The (conceptual) table of 3G cards on the device. An entry shall be placed in the storage table for each 3G card. |
| 1.3.6.1.4.1.74.1.30.5.1.1 | Rowng3GEntry | not-accessible | current | A (conceptual) entry for one logical 3G card area on the host. |
| 1.3.6.1.4.1.74.1.30.5.1.1.1 | Columnng3gIndex | not-accessible | current | A unique value for each logical 3G card contained by the device. |
| 1.3.6.1.4.1.74.1.30.5.1.1.2 | Columnng3gSlotNum | read-only | current | The slot the card is plugged into. Returns -1 if no card is found. |
| 1.3.6.1.4.1.74.1.30.5.1.1.3 | Columnng3gModemType | read-only | current | The modem type. |
| 1.3.6.1.4.1.74.1.30.5.1.1.4 | Columnng3gManufacturer | read-only | current | The 3G card manufacturer. |
| 1.3.6.1.4.1.74.1.30.5.1.1.5 | Columnng3gModel | read-only | current | The 3G card model. |
| 1.3.6.1.4.1.74.1.30.5.1.1.6 | Columnng3gRevision | read-only | current | The 3G card revision. |
| 1.3.6.1.4.1.74.1.30.5.1.1.7 | Columnng3gID | read-only | current | Either the IMEI or ESN depending on the card. |
| 1.3.6.1.4.1.74.1.30.5.1.1.8 | Columnng3gSignalStrength | read-only | current | Signal Strength at the connect. |
| 1.3.6.1.4.1.74.1.30.5.1.1.9 | Columnng3gCarrier | read-only | current | Information about the carrier. |
| 1.3.6.1.4.1.74.1.30.5.1.1.10 | Columnng3gImsiStatus | read-only | current | The IMSI attach status. |
| 1.3.6.1.4.1.74.1.30.5.1.1.11 | Columnng3gCellConnNetwork | read-only | current | The connected network. |
| 1.3.6.1.4.1.74.1.30.5.1.1.12 | Columnng3gPhoneNum | read-only | current | The cell phone number. |
| 1.3.6.1.4.1.74.1.30.5.1.1.13 | Columnng3gApn | read-only | current | The access point name. |
| 1.3.6.1.4.1.74.1.30.5.1.1.14 | Columnng3gApnUser | read-only | current | The APN userid. Only populated when the access point name exists. |
| 1.3.6.1.4.1.74.1.30.5.1.1.15 | Columnng3gApnPassword | read-only | current | The APN password. Only populated when the access point name exists. |
| 1.3.6.1.4.1.74.1.30.5.1.1.16 | Columnng3gCellModemPresent | read-only | current | If the cellular modem is a supported unit that allows the AT&T NetGate to query its current status then this value will indicate whether or not the unit is phy… |
| 1.3.6.1.4.1.74.1.30.5.1.1.17 | Columnng3gSIMCardNumber | read-only | current | The SIM number of the card. |
| 1.3.6.1.4.1.74.1.30.5.1.1.18 | Columnng3gDeviceType | read-only | current | The type of hardware of the cellular modem. |
| 1.3.6.1.4.1.74.1.30.6 | NodengTunnelInfo | |||
| 1.3.6.1.4.1.74.1.30.6.1 | TablengTunnelTable | not-accessible | current | The (conceptual) table of tunnels on the device. An entry shall be placed in the storage table for each tunnel. |
| 1.3.6.1.4.1.74.1.30.6.1.1 | RowngTunnelEntry | not-accessible | current | A (conceptual) entry for one logical tunnel area on the host. |
| 1.3.6.1.4.1.74.1.30.6.1.1.1 | ColumnngtuIndex | not-accessible | current | A unique value for each logical tunnel contained by the device. |
| 1.3.6.1.4.1.74.1.30.6.1.1.2 | ColumnngtuIpsecIface | read-only | current | The ipsec interface associated with the tunnel. |
| 1.3.6.1.4.1.74.1.30.6.1.1.3 | ColumnngtuAuthState | read-only | current | An internal state used to indicate the tunnel's current operation. |
| 1.3.6.1.4.1.74.1.30.6.1.1.4 | ColumnngtuState | read-only | current | An internal state used to indicate the tunnel's status. This state was created because the ngtuAuthState can change while the tunnel is still up. For example, … |
| 1.3.6.1.4.1.74.1.30.6.1.1.5 | ColumnngtuDuration | read-only | current | How long the tunnel has been up. |
| 1.3.6.1.4.1.74.1.30.6.1.1.6 | ColumnngtuEndpoint | read-only | current | IP of the endpoint the tunnel is connected to. Populated if the ngtuState is 'up'. |
| 1.3.6.1.4.1.74.1.30.6.1.1.7 | ColumnngtuEndpointType | read-only | current | Type of the endpoint the tunnel is connected to. Populated if the ngtuState is 'up'. |
| 1.3.6.1.4.1.74.1.30.6.1.1.8 | ColumnngtuBulkEncryptMode | read-only | current | Bulk encryption mode. |
| 1.3.6.1.4.1.74.1.30.6.1.1.9 | ColumnngtuCurrEncryptCeIp | read-only | current | Bulk encryption CE address. |
| 1.3.6.1.4.1.74.1.30.6.1.1.10 | ColumnngtuEspAlg | read-only | current | ESP algorithm. |
| 1.3.6.1.4.1.74.1.30.6.1.1.11 | ColumnngtuAuthAlg | read-only | current | AUTH algorithm. |
| 1.3.6.1.4.1.74.1.30.6.1.1.12 | ColumnngtuCompressionAlg | read-only | current | COMPRESSION algorithm. |
| 1.3.6.1.4.1.74.1.30.6.1.1.13 | ColumnngtuAuthType | read-only | current | Indicates the authentication server that will be used by the tunnel endpoint. |
| 1.3.6.1.4.1.74.1.30.6.1.1.14 | ColumnngtuAuthProt | read-only | current | The authentication protocol. |
| 1.3.6.1.4.1.74.1.30.6.1.1.15 | ColumnngtuReasonCode | read-only | current | A numeric value that indicates why a tunnel came down. The one exception is tnlAlive, which is sent for the tunnel 'alive' message for a tunnel that is still u… |
| 1.3.6.1.4.1.74.1.30.6.1.1.16 | ColumnngtuServerMgmt | read-only | current | AGNS managed or not. |
| 1.3.6.1.4.1.74.1.30.6.1.1.17 | ColumnngtuTunInitiator | read-only | current | What initiated the tunnel. |
| 1.3.6.1.4.1.74.1.30.6.1.1.18 | ColumnngtuTunMode | read-only | current | The tunnel control mode. |
| 1.3.6.1.4.1.74.1.30.6.1.1.19 | ColumnngtuIPv6Endpoint | read-only | current | IPv6 IP of the endpoint the tunnel is connected to. Populated if the ngtuState is 'up' and IPv6 is in use. |
| 1.3.6.1.4.1.74.1.30.7 | NodengCosInfo | |||
| 1.3.6.1.4.1.74.1.30.7.1 | ScalarngcoEnabled | read-only | current | Indicates if COS is enabled or not. |
| 1.3.6.1.4.1.74.1.30.7.2 | ScalarngcoNextTestTime | read-only | current | When the next bandwidth test is scheduled to run. MM/DD/YYYY HH:MM:SS. Returns '00/00/0000 00:00:00' when no test is scheduled. The time returned is the local … |
| 1.3.6.1.4.1.74.1.30.7.3 | ScalarngcoWanMtu | read-only | current | Current WAN interface MTU value. |
| 1.3.6.1.4.1.74.1.30.7.4 | ScalarngcoCurUpstreamBandw | read-only | current | Current upstream bandwidth high water mark in use. |
| 1.3.6.1.4.1.74.1.30.7.5 | ScalarngcoCurDownstreamBandw | read-only | current | Current downstream bandwidth high water mark in use. |
| 1.3.6.1.4.1.74.1.30.7.6 | ScalarngcoNextTestTimeDAT | read-only | current | When the next bandwidth test is scheduled to run. Returns January 1 year 0 time 0 when no test is scheduled. NOTE: This entry replaces ngcoNextTestTime. |
| 1.3.6.1.4.1.74.1.30.7.7 | ScalarngcoLastTestTimeDAT | read-only | current | The date and time of when the last bandwidth test was performed. NOTE: The date and time of high water marks retained after a reboot will return January 1 year… |
| 1.3.6.1.4.1.74.1.30.7.8 | ScalarngcoLastUpstreamResult | read-only | current | The upstream bandwidth measured when the last bandwidth test was performed. |
| 1.3.6.1.4.1.74.1.30.7.9 | ScalarngcoLastDownstreamResult | read-only | current | The downstream bandwidth measured when the last bandwidth test was performed. |
| 1.3.6.1.4.1.74.1.30.8 | IdentityattNetGateMIB | The MIB module for the AT&T NetGate. | ||
| 1.3.6.1.4.1.74.1.30.8.1 | NodengMIBConformance | |||
| 1.3.6.1.4.1.74.1.30.8.1.1 | NodengMIBCompliances | |||
| 1.3.6.1.4.1.74.1.30.8.1.1.1 | CompliancengBasicComplianceRev | current | The compliance statement for AT&T NetGate entities which implement this MIB module. | |
| 1.3.6.1.4.1.74.1.30.8.1.2 | NodengMIBGroups | |||
| 1.3.6.1.4.1.74.1.30.8.1.2.1 | GroupnghwGroup | current | The hardware group. | |
| 1.3.6.1.4.1.74.1.30.8.1.2.2 | GroupngifGroup | current | The interface group. | |
| 1.3.6.1.4.1.74.1.30.8.1.2.3 | GroupngvlGroup | current | The VLAN group. | |
| 1.3.6.1.4.1.74.1.30.8.1.2.4 | GroupngvrGroup | current | The VRRP group. | |
| 1.3.6.1.4.1.74.1.30.8.1.2.5 | Groupng3gGroup | current | The 3G group. | |
| 1.3.6.1.4.1.74.1.30.8.1.2.6 | GroupngtuGroup | current | The tunnel group. | |
| 1.3.6.1.4.1.74.1.30.8.1.2.7 | GroupngcoGroup | current | The COS group. | |
| 1.3.6.1.4.1.74.1.30.8.1.2.8 | GroupngfwGroup | current | The firewall group. | |
| 1.3.6.1.4.1.74.1.30.8.1.2.9 | GroupngrmGroup | current | The Rogue MAC group. | |
| 1.3.6.1.4.1.74.1.30.8.1.2.10 | GroupngdiGroup | current | The dial group. | |
| 1.3.6.1.4.1.74.1.30.8.1.2.11 | GroupngdhlGroup | current | The DHCP leases group. | |
| 1.3.6.1.4.1.74.1.30.8.2 | NodengEvents | |||
| 1.3.6.1.4.1.74.1.30.8.2.0 | NodengEventNotification | |||
| 1.3.6.1.4.1.74.1.30.8.2.0.1 | NotificationngevIpConntrackTable | current | Sent if the Firewall Connection table reaches the specified threshold. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.2 | NotificationngevIpConntrackTableFull | current | Indicates the firewall Connection table has reached capacity. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.3 | NotificationngevExcessiveDial | current | The device has been in dial backup longer than the allowed threshold. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.4 | NotificationngevActiveWanIpChanged | current | The IP address associated with the active WAN interface has changed. For example, dial backup was initiated because WAN connectivity was lost. Another example … | |
| 1.3.6.1.4.1.74.1.30.8.2.0.5 | NotificationngevRogueMacDetected | current | The unauthorized MAC detection feature is enabled and an unauthorized MAC address was detected. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.6 | NotificationngevRogueMacNoFile | current | The unauthorized MAC detection feature is enabled and the authorized MAC file doesn't exist. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.7 | NotificationngevNoTeps | current | The AT&T NetGate cannot bring up a tunnel to any of the tunnel endpoints. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.8 | NotificationngevDeviceDiscoOrNotFound | current | Sent if the AT&T NetGate profile is not found. If the AT&T NetGate goes too long without finding its device profile then the device will switch its status to d… | |
| 1.3.6.1.4.1.74.1.30.8.2.0.9 | NotificationngevTunnelUp | current | Information about the results of a tunnel connection attempt. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.10 | NotificationngevTunnelDown | current | Information about a tunnel disconnect. The one exception is a tunnel 'alive' message, which is sent for a tunnel that is still up. Tunnel 'alive' messages have… | |
| 1.3.6.1.4.1.74.1.30.8.2.0.11 | NotificationngevDialAutotestFailure | current | The Dial Autotest failed. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.12 | NotificationngevDeviceReboot | current | Sent when the device reboots. Requestor IP will be set to loopback if an automated process caused the reboot. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.13 | NotificationngevDeviceShutdown | current | Sent when the device shuts down. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.14 | NotificationngevSshLogin | current | Sent when a user accesses the device via SSH. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.15 | NotificationngevDhcpPoolExhausted | current | Sent when a VLAN's DHCP pool is full. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.16 | NotificationngevForTestingOnly | current | Only for use by QA and development for testing. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.17 | NotificationngevSecondaryAuthAttempt | current | Sent when a secondary login attempt occurs. Secondary logins are performed when someone tries to ssh into the AT&T NetGate. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.18 | NotificationngevSwitchUseridAttempt | current | Sent when a user who is ssh'ed into the AT&T NetGate tries to switch to another userid. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.19 | Notificationngev8200VPortDown | current | Sent when either port 7 or 8 is determined to be not active. Only used by the AT&T NetGate 8200V. | |
| 1.3.6.1.4.1.74.1.30.8.2.0.20 | NotificationngevCellModemRequired | current | Sent when either the AT&T NetGate boots without a cell modem present or when the AT&T NetGate detects that the cell modem has been removed. The cellular modem … | |
| 1.3.6.1.4.1.74.1.30.8.2.1 | NodengEventObjects | |||
| 1.3.6.1.4.1.74.1.30.8.2.1.1 | ScalarngevNetGateMac | accessible-for-notify | current | The MAC address associated with this AT&T NetGate. |
| 1.3.6.1.4.1.74.1.30.8.2.1.2 | ScalarngevRogueMac | accessible-for-notify | current | The MAC address of the unauthorized machine detected when MAC monitoring is enabled. |
| 1.3.6.1.4.1.74.1.30.8.2.1.3 | ScalarngevActiveWanIp | accessible-for-notify | current | The IP address of the active WAN interface. When viewing the output of the SNMP tree this can be determined from the interface statistics. However, for traps t… |
| 1.3.6.1.4.1.74.1.30.8.2.1.4 | ScalarngevIpConntrackMaxPercentage | accessible-for-notify | current | An alert will be sent when the ip_conntrack table is within this percentage of the maximum. |
| 1.3.6.1.4.1.74.1.30.8.2.1.5 | ScalarngevIpConntrackCurrentPercentage | accessible-for-notify | current | The ip_conntrack table is currently at this percentage of the maximum. |
| 1.3.6.1.4.1.74.1.30.8.2.1.6 | ScalarngevTimeInDial | accessible-for-notify | current | The number of minutes the device has been connected via dial. |
| 1.3.6.1.4.1.74.1.30.8.2.1.7 | ScalarngevQueryProblem | accessible-for-notify | current | Used to indicate what type of problem is happening with the device's status. profileNotFound means that a profile for the device was not found on an AT&T Admin… |
| 1.3.6.1.4.1.74.1.30.8.2.1.8 | ScalarngevTunConnectionId | accessible-for-notify | current | Use to tie this trap to a trap for the tunnel disconnect. |
| 1.3.6.1.4.1.74.1.30.8.2.1.9 | ScalarngevTunnelDateAndTime | accessible-for-notify | current | The timestamp from when the tunnel came up, tried to come up, or came down. |
| 1.3.6.1.4.1.74.1.30.8.2.1.10 | ScalarngevConnectionType | accessible-for-notify | current | Indicates whether the tunnel is via broadband or dial. |
| 1.3.6.1.4.1.74.1.30.8.2.1.11 | ScalarngevAccount | accessible-for-notify | current | In the tunnel up/down trap it is the customer account used to start the tunnel. In the secondary auth attempt trap it is the account used for the login attempt. |
| 1.3.6.1.4.1.74.1.30.8.2.1.12 | ScalarngevUserid | accessible-for-notify | current | In the tunnel up/down trap it is the customer userid used to start the tunnel. In the secondary auth attempt trap it is the userid used for the login attempt. |
| 1.3.6.1.4.1.74.1.30.8.2.1.13 | ScalarngevTunConReason | accessible-for-notify | current | String that shows a message that explains the results of a tunnel connection attempt. |
| 1.3.6.1.4.1.74.1.30.8.2.1.14 | ScalarngevDialTestFailReason | accessible-for-notify | current | String that shows why the dial test failed. |
| 1.3.6.1.4.1.74.1.30.8.2.1.15 | ScalarngevSshSourceIp | accessible-for-notify | current | The IP address of the client that ssh'ed into the device. |
| 1.3.6.1.4.1.74.1.30.8.2.1.16 | ScalarngevRequestorIp | accessible-for-notify | current | The IP address of the machine that initiated a particular request (reboot, shutdown, secondary auth attempt, etc.). Will be set to loopback if an automated pro… |
| 1.3.6.1.4.1.74.1.30.8.2.1.17 | ScalarngevDialTestFailCategory | accessible-for-notify | current | Shows what type of category the dial test failure would be put in. For example, a busy signal would be a warning but a bad password would be an error. |
| 1.3.6.1.4.1.74.1.30.8.2.1.18 | ScalarngevRogueIp | accessible-for-notify | current | The IP address of the unauthorized machine detected when MAC monitoring is enabled. Set to zero if not used. |
| 1.3.6.1.4.1.74.1.30.8.2.1.19 | ScalarngevRogueInterface | accessible-for-notify | current | The interface of the unauthorized machine detected when MAC monitoring is enabled. |
| 1.3.6.1.4.1.74.1.30.8.2.1.20 | ScalarngevTrapDescription | accessible-for-notify | current | For MAC monitoring this is the Service Manager description field. Other traps may use this field for other purposes. |
| 1.3.6.1.4.1.74.1.30.8.2.1.21 | ScalarngevLoginResult | accessible-for-notify | current | Specifies the result of the secondary login attempt when someone tries to ssh into the AT&T NetGate. |
| 1.3.6.1.4.1.74.1.30.8.2.1.22 | ScalarngevNewLocalID | accessible-for-notify | current | The userid that the user became after their secondary login attempt was successful. Secondary logins are performed when someone tries to ssh into the AT&T NetG… |
| 1.3.6.1.4.1.74.1.30.8.2.1.23 | ScalarngevOldLocalID | accessible-for-notify | current | The userid that was in use when the user made their switch user attempt. |
| 1.3.6.1.4.1.74.1.30.8.2.1.24 | ScalarngevMaxTimeInDialUntilAlert | accessible-for-notify | current | The max number of minutes the device can be connected via dial without a trap being sent for excessive dial. Once this maximum is reached a trap will be sent. |
| 1.3.6.1.4.1.74.1.30.8.2.1.25 | ScalarngevPortDown | accessible-for-notify | current | An individual port that is currently not active. Only used by the AT&T NetGate 8200V. |
| 1.3.6.1.4.1.74.1.30.8.2.1.26 | ScalarngevIPv6ActiveWanIp | accessible-for-notify | current | The IP address of the active IPv6 WAN interface. When viewing the output of the SNMP tree this can be determined from the interface statistics. However, for tr… |
| 1.3.6.1.4.1.74.1.30.8.2.1.27 | ScalarngevIPv6RogueIp | accessible-for-notify | current | The IPv6 IP address of the unauthorized machine detected when MAC monitoring is enabled. Set to zero if not used. |
| 1.3.6.1.4.1.74.1.30.8.2.1.28 | ScalarngevIPv6RequestorIp | accessible-for-notify | current | The IPv6 IP address of the machine that initiated a particular request (reboot, shutdown, secondary auth attempt, etc.). Will be set to loopback if an automate… |
| 1.3.6.1.4.1.74.1.30.8.2.1.29 | ScalarngevCardNotFoundTime | accessible-for-notify | current | The timestamp that indicates when the AT&T NetGate noted that the required cellular card was missing. |
| 1.3.6.1.4.1.74.1.30.8.2.1.30 | ScalarngevVPNServiceIPv4Address | accessible-for-notify | current | The VPN Service Address assigned for this tunnel connetino. Will be not set if this is an IPv6 tunnel or the tunnel did not come up. |
| 1.3.6.1.4.1.74.1.30.8.2.1.31 | ScalarngevVPNServiceIPv6Address | accessible-for-notify | current | The VPN Service Address assigned for this tunnel connetino. Will be not set if this is an IPv4 tunnel or the tunnel did not come up. |
| 1.3.6.1.4.1.74.1.30.8.2.1.32 | ScalarngevTunConReasonNUM | read-only | current | A numeric value that indicates the results of a tunnel connection attempt. |
| 1.3.6.1.4.1.74.1.30.8.2.2 | NodengEventConformance | |||
| 1.3.6.1.4.1.74.1.30.8.2.2.1 | NodengEventCompliances | |||
| 1.3.6.1.4.1.74.1.30.8.2.2.1.1 | CompliancengevBasicComplianceRev | current | The compliance statement for AT&T NetGate entities which implement this MIB module. | |
| 1.3.6.1.4.1.74.1.30.8.2.2.2 | NodengEventGroups | |||
| 1.3.6.1.4.1.74.1.30.8.2.2.2.1 | GroupngevNotificationsGroup | current | The event notifications | |
| 1.3.6.1.4.1.74.1.30.8.2.2.2.2 | GroupngevObjectsGroup | current | The event ojects. | |
| 1.3.6.1.4.1.74.1.30.9 | NodengFirewallInfo | |||
| 1.3.6.1.4.1.74.1.30.9.1 | TablengFirewallTable | not-accessible | current | The (conceptual) table of firewall tables on the device. An entry shall be placed in the storage table for each table. |
| 1.3.6.1.4.1.74.1.30.9.1.1 | RowngFirewallTableEntry | not-accessible | current | A (conceptual) entry for one logical firewall table area on the host. |
| 1.3.6.1.4.1.74.1.30.9.1.1.1 | ColumnngfwTableIndex | not-accessible | current | A unique value for each logical firewall table contained by the device. |
| 1.3.6.1.4.1.74.1.30.9.1.1.2 | ColumnngfwTableName | read-only | current | The name of this table. |
| 1.3.6.1.4.1.74.1.30.9.1.1.3 | ColumnngfwTableNumberOfChains | read-only | current | The number of chains in this particular table. |
| 1.3.6.1.4.1.74.1.30.9.2 | TablengFirewallChainTable | not-accessible | current | The (conceptual) chain of firewall chains on the device. An entry shall be placed in the storage chain for each chain. |
| 1.3.6.1.4.1.74.1.30.9.2.1 | RowngFirewallChainEntry | not-accessible | current | A (conceptual) entry for one logical firewall chain area on the host. |
| 1.3.6.1.4.1.74.1.30.9.2.1.1 | ColumnngfwChainIndex | not-accessible | current | A unique value for each logical firewall chain contained by the device. |
| 1.3.6.1.4.1.74.1.30.9.2.1.2 | ColumnngfwChainTableIndex | read-only | current | Shows what table this chain belongs to. Corresponds to ngfwTableIndex in ngFirewallTable. |
| 1.3.6.1.4.1.74.1.30.9.2.1.3 | ColumnngfwChainName | read-only | current | The name of this chain. |
| 1.3.6.1.4.1.74.1.30.9.2.1.4 | ColumnngfwChainsNumberOfRules | read-only | current | The number of rules in this particular chain. |
| 1.3.6.1.4.1.74.1.30.9.3 | TablengFirewallRuleTable | not-accessible | current | The (conceptual) table of firewall rules on the device. An entry shall be placed in the storage rule for each rule. |
| 1.3.6.1.4.1.74.1.30.9.3.1 | RowngFirewallRuleEntry | not-accessible | current | A (conceptual) entry for one logical firewall rule area on the host. |
| 1.3.6.1.4.1.74.1.30.9.3.1.1 | ColumnngfwRuleIndex | not-accessible | current | A unique value for each logical firewall rule contained by the device. |
| 1.3.6.1.4.1.74.1.30.9.3.1.2 | ColumnngfwRuleTableIndex | read-only | current | Shows what table this rule belongs to. Corresponds to ngfwTableIndex in ngFirewallTable. |
| 1.3.6.1.4.1.74.1.30.9.3.1.3 | ColumnngfwRuleChainIndex | read-only | current | Shows what chain this rule belongs to. Corresponds to ngfwChainIndex in ngFirewallChainTable. |
| 1.3.6.1.4.1.74.1.30.9.3.1.4 | ColumnngfwRulePackets | read-only | current | Total packets for this rule. |
| 1.3.6.1.4.1.74.1.30.9.3.1.5 | ColumnngfwRuleBytes | read-only | current | Total bytes for this rule. |
| 1.3.6.1.4.1.74.1.30.9.3.1.6 | ColumnngfwRuleTarget | read-only | current | The rule target. |
| 1.3.6.1.4.1.74.1.30.9.3.1.7 | ColumnngfwRuleProtocol | read-only | current | The rule protocol. |
| 1.3.6.1.4.1.74.1.30.9.3.1.8 | ColumnngfwRuleInIface | read-only | current | The rule input interface. |
| 1.3.6.1.4.1.74.1.30.9.3.1.9 | ColumnngfwRuleOutIface | read-only | current | The rule output interface. |
| 1.3.6.1.4.1.74.1.30.9.3.1.10 | ColumnngfwRuleSrcIp | read-only | current | The rule source IP. |
| 1.3.6.1.4.1.74.1.30.9.3.1.11 | ColumnngfwRuleSrcMask | read-only | current | The rule source mask in CIDR-compliant format. |
| 1.3.6.1.4.1.74.1.30.9.3.1.12 | ColumnngfwRuleDstIp | read-only | current | The rule destination IP. |
| 1.3.6.1.4.1.74.1.30.9.3.1.13 | ColumnngfwRuleDstMask | read-only | current | The rule destination mask in CIDR-compliant format. |
| 1.3.6.1.4.1.74.1.30.9.3.1.14 | ColumnngfwRuleMisc | read-only | current | The rule MISC section. |
| 1.3.6.1.4.1.74.1.30.9.4 | ScalarngfwIpConntrackNumEntries | read-only | current | The number entries in the ip_conntrack file. |
| 1.3.6.1.4.1.74.1.30.9.5 | ScalarngfwIpConntrackMaxNumEntries | read-only | current | The maximum number of entries in the ip_conntrack file. |
| 1.3.6.1.4.1.74.1.30.9.6 | TablengIPv6FirewallTable | not-accessible | current | The (conceptual) table of IPv6 firewall tables on the device. An entry shall be placed in the storage table for each table. |
| 1.3.6.1.4.1.74.1.30.9.6.1 | RowngIPv6FirewallTableEntry | not-accessible | current | A (conceptual) entry for one logical IPv6 firewall table area on the host. |
| 1.3.6.1.4.1.74.1.30.9.6.1.1 | ColumnngfwIPv6TableIndex | not-accessible | current | A unique value for each logical IPv6 firewall table contained by the device. |
| 1.3.6.1.4.1.74.1.30.9.6.1.2 | ColumnngfwIPv6TableName | read-only | current | The name of this table. |
| 1.3.6.1.4.1.74.1.30.9.6.1.3 | ColumnngfwIPv6TableNumberOfChains | read-only | current | The number of chains in this particular table. |
| 1.3.6.1.4.1.74.1.30.9.7 | TablengIPv6FirewallChainTable | not-accessible | current | The (conceptual) chain of IPv6 firewall chains on the device. An entry shall be placed in the storage chain for each chain. |
| 1.3.6.1.4.1.74.1.30.9.7.1 | RowngIPv6FirewallChainEntry | not-accessible | current | A (conceptual) entry for one logical IPv6 firewall chain area on the host. |
| 1.3.6.1.4.1.74.1.30.9.7.1.1 | ColumnngfwIPv6ChainIndex | not-accessible | current | A unique value for each logical IPv6 firewall chain contained by the device. |
| 1.3.6.1.4.1.74.1.30.9.7.1.2 | ColumnngfwIPv6ChainTableIndex | read-only | current | Shows what table this chain belongs to. Corresponds to ngfwIPv6TableIndex in ngIPv6FirewallTable. |
| 1.3.6.1.4.1.74.1.30.9.7.1.3 | ColumnngfwIPv6ChainName | read-only | current | The name of this chain. |
| 1.3.6.1.4.1.74.1.30.9.7.1.4 | ColumnngfwIPv6ChainsNumberOfRules | read-only | current | The number of rules in this particular chain. |
| 1.3.6.1.4.1.74.1.30.9.8 | TablengIPv6FirewallRuleTable | not-accessible | current | The (conceptual) table of IPv6 firewall rules on the device. An entry shall be placed in the storage rule for each rule. |
| 1.3.6.1.4.1.74.1.30.9.8.1 | RowngIPv6FirewallRuleEntry | not-accessible | current | A (conceptual) entry for one logical IPv6 firewall rule area on the host. |
| 1.3.6.1.4.1.74.1.30.9.8.1.1 | ColumnngfwIPv6RuleIndex | not-accessible | current | A unique value for each logical IPv6 firewall rule contained by the device. |
| 1.3.6.1.4.1.74.1.30.9.8.1.2 | ColumnngfwIPv6RuleTableIndex | read-only | current | Shows what table this rule belongs to. Corresponds to ngfwIPv6TableIndex in ngIPv6FirewallTable. |
| 1.3.6.1.4.1.74.1.30.9.8.1.3 | ColumnngfwIPv6RuleChainIndex | read-only | current | Shows what chain this rule belongs to. Corresponds to ngfwIPv6ChainIndex in ngIPv6FirewallChainTable. |
| 1.3.6.1.4.1.74.1.30.9.8.1.4 | ColumnngfwIPv6RulePackets | read-only | current | Total packets for this rule. |
| 1.3.6.1.4.1.74.1.30.9.8.1.5 | ColumnngfwIPv6RuleBytes | read-only | current | Total bytes for this rule. |
| 1.3.6.1.4.1.74.1.30.9.8.1.6 | ColumnngfwIPv6RuleTarget | read-only | current | The rule target. |
| 1.3.6.1.4.1.74.1.30.9.8.1.7 | ColumnngfwIPv6RuleProtocol | read-only | current | The rule protocol. |
| 1.3.6.1.4.1.74.1.30.9.8.1.8 | ColumnngfwIPv6RuleInIface | read-only | current | The rule input interface. |
| 1.3.6.1.4.1.74.1.30.9.8.1.9 | ColumnngfwIPv6RuleOutIface | read-only | current | The rule output interface. |
| 1.3.6.1.4.1.74.1.30.9.8.1.10 | ColumnngfwIPv6RuleSrcIp | accessible-for-notify | current | The rule source IP. Not used and set to all zeroes for IPv4 firewall output. |
| 1.3.6.1.4.1.74.1.30.9.8.1.11 | ColumnngfwIPv6RuleSrcMask | read-only | current | The rule source mask in CIDR-compliant format. Not used and set to all zeroes for IPv4 firewall output. |
| 1.3.6.1.4.1.74.1.30.9.8.1.12 | ColumnngfwIPv6RuleDstIp | accessible-for-notify | current | The rule source IP. Not used and set to all zeroes for IPv4 firewall output. |
| 1.3.6.1.4.1.74.1.30.9.8.1.13 | ColumnngfwIPv6RuleDstMask | read-only | current | The rule source mask in CIDR-compliant format. Not used and set to all zeroes for IPv4 firewall output. |
| 1.3.6.1.4.1.74.1.30.9.8.1.14 | ColumnngfwIPv6RuleMisc | read-only | current | The rule MISC section. |
| 1.3.6.1.4.1.74.1.30.10 | NodengRogueMacInfo | |||
| 1.3.6.1.4.1.74.1.30.10.1 | ScalarngRogueMacStatus | read-only | current | Inidicates whether or not Rogue MAC detection has been enabled in Service Manager. |
| 1.3.6.1.4.1.74.1.30.10.2 | TablengRogueMacTable | not-accessible | current | The (conceptual) table of rogue MACs detected by the device. An entry shall be placed in the storage table for each rogue MAC. |
| 1.3.6.1.4.1.74.1.30.10.2.1 | RowngRogueMacEntry | not-accessible | current | A (conceptual) entry for one logical rogue MAC area on the host. |
| 1.3.6.1.4.1.74.1.30.10.2.1.1 | ColumnngrmIndex | not-accessible | current | A unique value for each logical rogue MAC detected by the device. |
| 1.3.6.1.4.1.74.1.30.10.2.1.2 | ColumnngrmMac | read-only | current | The MAC address of this detected rogue MAC. One entry that is zeroed out is returned when there are no rogue MACs detected. |
| 1.3.6.1.4.1.74.1.30.10.2.1.3 | ColumnngrmTimestamp | read-only | current | The date and time of when this rogue MAC was detected. Returned as a regular string in the format MM/DD/YYYY HH:MM:SS. Returns '00/00/0000 00:00:00' when there… |
| 1.3.6.1.4.1.74.1.30.10.2.1.4 | ColumnngrmIface | read-only | current | The interface this rogue MAC was detected on. One entry that with a value of 'NONE' and a msg is returned when there are no rogue MACs detected. |
| 1.3.6.1.4.1.74.1.30.10.2.1.5 | ColumnngrmTimestampDAT | read-only | current | The date and time of when this rogue MAC was detected. Returns January 1 year 0 time 0 when there are no rogue MACs detected or the time is unknown. NOTE: This… |
| 1.3.6.1.4.1.74.1.30.11 | NodengDialInfo | |||
| 1.3.6.1.4.1.74.1.30.11.1 | ScalarngdiPhoneNum | read-only | current | The full phone number that will be dialed by the AT&T NetGate. This also includes dial prefix information. For example, the AT&T NetGate might have to dial the… |
| 1.3.6.1.4.1.74.1.30.11.2 | ScalarngdiLastTestResult | read-only | current | The result of the last dial test. If no dial test has been performed yet then 'failure' is returned. If a dial test is not needed because dial is currently up … |
| 1.3.6.1.4.1.74.1.30.11.3 | ScalarngdiLastTestCompleteTime | read-only | current | The approximate time the last dial test completed given in the format MM/DD/YYYY HH:MM:SS. Returns '00/00/0000 00:00:00' when no test is scheduled. or when no … |
| 1.3.6.1.4.1.74.1.30.11.4 | ScalarngdiDialTestFailCategory | accessible-for-notify | current | Shows what type of category the dial test failure would be put in. For example, a busy signal would return dialProblemWarning but a bad password would return d… |
| 1.3.6.1.4.1.74.1.30.11.5 | ScalarngdiDialTestFailReason | accessible-for-notify | current | String that shows why the dial test failed. If the test was successful or the dial connection is currently up then 'success' is returned. |
| 1.3.6.1.4.1.74.1.30.11.6 | ScalarngdiLastTestCompleteTimeDAT | read-only | current | If the dial connection is currently in use then the dial test is not needed (since dial is obviously already working). ngdiLastTestCompleteTimeDAT is simply up… |
| 1.3.6.1.4.1.74.1.30.11.7 | ScalarngdiSecondaryPhoneNum | read-only | current | Specifies the secondary phone number to be tried for Dial Backup in case the primary Dial Backup phone number is not available. |
| 1.3.6.1.4.1.74.1.30.12 | NodengDhcpLeaseInfo | |||
| 1.3.6.1.4.1.74.1.30.12.1 | TablengDhcpLeaseTable | not-accessible | current | The (conceptual) table of all current, active DHCP leases on the device. An entry shall be placed in the storage table for each DHCP lease. |
| 1.3.6.1.4.1.74.1.30.12.1.1 | RowngDhcpLeaseEntry | not-accessible | current | A (conceptual) entry for one logical DHCP lease on the host. |
| 1.3.6.1.4.1.74.1.30.12.1.1.1 | ColumnngdhlIndex | not-accessible | current | A unique value for each logical DHCP lease contained by the device. |
| 1.3.6.1.4.1.74.1.30.12.1.1.2 | ColumnngdhlLeaseAddr | read-only | current | The IP address associated with an indivdual DHCP lease. |
| 1.3.6.1.4.1.74.1.30.12.1.1.3 | ColumnngdhlMac | read-only | current | The MAC address associated with an indivdual DHCP lease. |
| 1.3.6.1.4.1.74.1.30.12.1.1.4 | ColumnngdhlHostname | read-only | current | The hostname associated with an indivdual DHCP lease. |
| 1.3.6.1.4.1.74.1.30.12.1.1.5 | ColumnngdhlPort | read-only | current | The physical port (if valid) on the device associated with an indivdual DHCP lease. |
| 1.3.6.1.4.1.74.1.30.12.1.1.6 | ColumnngdhlVlanId | read-only | current | The VLAN ID on the device associated with an indivdual DHCP lease. |