AtiStackSwitch9424-MIB
426 objects
Private MIB for ATI layer 2 stackable switches. This MIB can be used in Windows and UNIX environments.
Imported Objects
| RFC1155-SMI | enterprises |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207 | IdentityalliedTelesyn | Private MIB for ATI layer 2 stackable switches. This MIB can be used in Windows and UNIX environments. | ||
| 1.3.6.1.4.1.207.1 | NodeatiProduct | |||
| 1.3.6.1.4.1.207.1.4 | Nodeswhub | |||
| 1.3.6.1.4.1.207.1.4.37 | Nodeat-8324 | |||
| 1.3.6.1.4.1.207.1.4.77 | Nodeat-8316F | |||
| 1.3.6.1.4.1.207.1.4.98 | Nodeat-8524M | |||
| 1.3.6.1.4.1.207.1.4.99 | Nodeat-8550GB | |||
| 1.3.6.1.4.1.207.1.4.100 | Nodeat-8516F | |||
| 1.3.6.1.4.1.207.1.4.104 | Nodeat-8550SP | |||
| 1.3.6.1.4.1.207.1.4.105 | Nodeat-9424T-SP | |||
| 1.3.6.1.4.1.207.1.4.112 | Nodeat-9424T-GB | |||
| 1.3.6.1.4.1.207.1.4.113 | Nodeat-8524POE | |||
| 1.3.6.1.4.1.207.1.4.117 | Nodeat-9408LC-SP | |||
| 1.3.6.1.4.1.207.1.4.118 | Nodeat-9424Ti-SP | |||
| 1.3.6.1.4.1.207.1.4.119 | Nodeat-9448Ts-XP | |||
| 1.3.6.1.4.1.207.1.4.130 | Nodeat-9448Ts | |||
| 1.3.6.1.4.1.207.1.4.131 | Nodeat-9448T-SP | |||
| 1.3.6.1.4.1.207.1.4.132 | Nodeat-9424Ts-XP | |||
| 1.3.6.1.4.1.207.1.4.133 | Nodeat-9424Ts | |||
| 1.3.6.1.4.1.207.1.4.146 | Nodeat-9424T | |||
| 1.3.6.1.4.1.207.1.4.152 | Nodeat-9424TPOE | |||
| 1.3.6.1.4.1.207.1.4.153 | Nodeat-9424TL | |||
| 1.3.6.1.4.1.207.8 | NodemibObject | |||
| 1.3.6.1.4.1.207.8.17 | NodeatiStkSwMib | |||
| 1.3.6.1.4.1.207.8.17.1 | NodeatiStkSwSysGroup | |||
| 1.3.6.1.4.1.207.8.17.1.1 | NodeatiStkSwSysConfig | |||
| 1.3.6.1.4.1.207.8.17.1.1.1 | ScalaratiStkSwSysReset | read-write | current | Setting this object to 'reset' will cause the switch to perform a soft reboot. Setting this object to 'no-reset' will have no effect. |
| 1.3.6.1.4.1.207.8.17.1.1.2 | ScalaratiStkSwSysIpAddress | read-write | current | The IP address of the switch. |
| 1.3.6.1.4.1.207.8.17.1.1.3 | ScalaratiStkSwSysSubnetMask | read-write | current | The subnet mask of the switch. |
| 1.3.6.1.4.1.207.8.17.1.1.4 | ScalaratiStkSwSysGateway | read-write | current | The IP address of the gateway for the switch. |
| 1.3.6.1.4.1.207.8.17.1.1.5 | ScalaratiStkSwSysIpAddressStatus | read-only | current | This object specifies how the IP address, subnet mask and the gateway address currently in use on the switch was obtained/configured. |
| 1.3.6.1.4.1.207.8.17.1.1.6 | ScalaratiStkSwSysDnsServer | read-write | current | This object specifies the IP address of the DNS server for the switch. This MIB is not applicable to the 85xx and 94xx family of ATI switches. |
| 1.3.6.1.4.1.207.8.17.1.1.7 | ScalaratiStkSwSysDefaultDomainName | read-write | current | This object specifies the default domain name for the switch. This MIB is not applicable to the 85xx and 94xx family of ATI switches. |
| 1.3.6.1.4.1.207.8.17.1.1.8 | ScalaratiStkSwSysNumberOfModules | read-only | current | This object gives a count of the number of modules present in the stackable switch. |
| 1.3.6.1.4.1.207.8.17.1.1.9 | ScalaratiStkSwSysSpanningTreeStatus | read-write | current | Setting this object to 'enable' will enable spanning tree protocol on the switch. Setting this object to 'disable' will disable spanning tree protocol on the s… |
| 1.3.6.1.4.1.207.8.17.1.1.10 | ScalaratiStkSwSysSpanningTreeVersion | read-write | current | The object can be used to select the version of spanning tree protocol running on the switch. |
| 1.3.6.1.4.1.207.8.17.1.1.11 | ScalaratiStkSwSysAction | read-write | current | This object specifies the following actions that apply to the switch: saveConfig - Save the current switch configuration. reset - Reboot the switch. defaultCon… |
| 1.3.6.1.4.1.207.8.17.1.1.12 | ScalaratiStkSwSysNumOfModuleInStack | read-only | current | This object specifies the number of stacking modules in the stack. |
| 1.3.6.1.4.1.207.8.17.1.2 | NodeatiStkSwSysNwMgmt | |||
| 1.3.6.1.4.1.207.8.17.1.2.1 | ScalaratiStkSwSysTrapRecv1 | read-write | obsolete | This object specifies the IP address of the management station #1 to which traps are sent by the switch. This MIB is not applicable to the 85xx and 94xx family… |
| 1.3.6.1.4.1.207.8.17.1.2.2 | ScalaratiStkSwSysTrapRecv2 | read-write | obsolete | This object specifies the IP address of the management station #2 to which traps are sent by the switch. This MIB is not applicable to the 85xx and 94xx family… |
| 1.3.6.1.4.1.207.8.17.1.2.3 | ScalaratiStkSwSysTrapRecv3 | read-write | obsolete | This object specifies the IP address of the management station #3 to which traps are sent by the switch. This MIB is not applicable to the 85xx and 94xx family… |
| 1.3.6.1.4.1.207.8.17.1.2.4 | ScalaratiStkSwSysTrapRecv4 | read-write | obsolete | This object specifies the IP address of the management station #4 to which traps are sent by the switch. This MIB is not applicable to the 85xx and 94xx family… |
| 1.3.6.1.4.1.207.8.17.1.3 | TableatiStkSwSysProductInfoTable | not-accessible | current | This table contains a list of modules present in the switch stack and their associated hardware information. |
| 1.3.6.1.4.1.207.8.17.1.3.1 | RowatiStkSwSysProductInfoEntry | not-accessible | current | This object specifies an entry in 'atiStkSwSysProductInfoTable' that describes the hardware informaton for a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.1.3.1.1 | ColumnatiStkSwSysModuleId | read-only | current | The ID of this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.2 | ColumnatiStkSwSysProductType | read-only | current | The product type of this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.3 | ColumnatiStkSwSysMacAddress | read-only | current | The system MAC address used by this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.4 | ColumnatiStkSwSysSwName | read-only | current | The name of the system software running on this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.5 | ColumnatiStkSwSysSwVersion | read-only | current | The version of the system software running on this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.6 | ColumnatiStkSwSysHwName | read-only | current | The name of the module hardware. |
| 1.3.6.1.4.1.207.8.17.1.3.1.7 | ColumnatiStkSwSysHwRevision | read-only | current | The revision number of the module hardware. |
| 1.3.6.1.4.1.207.8.17.1.3.1.8 | ColumnatiStkSwSysSerialNumber | read-only | current | The serial number of the module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.9 | ColumnatiStkSwSysTotalPortCount | read-only | current | Total number of ports (base and uplink) present on this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.10 | ColumnatiStkSwSysBasePortType | read-only | current | The hardware type of a base port on this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.11 | ColumnatiStkSwSysBasePortCount | read-only | current | Total number of base ports present on this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.12 | ColumnatiStkSwSysUplinkAModelName | read-only | current | The model name of the uplink #A connector of this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.13 | ColumnatiStkSwSysUplinkAPortType | read-only | current | The hardware type of a port present in the uplink #A connector of this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.14 | ColumnatiStkSwSysUplinkAPortCount | read-only | current | Total number of uplink #A ports present on this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.15 | ColumnatiStkSwSysUplinkAPortIdBase | read-only | current | The ID of the first port in uplink #A of this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.16 | ColumnatiStkSwSysUplinkAPortIdLimit | read-only | current | The ID of the last port in uplink #A of this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.17 | ColumnatiStkSwSysUplinkBModelName | read-only | current | The model name of the uplink #B connector of this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.18 | ColumnatiStkSwSysUplinkBPortType | read-only | current | The hardware type of a port present in the uplink #B connector of this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.19 | ColumnatiStkSwSysUplinkBPortCount | read-only | current | Total number of uplink #B ports present on this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.20 | ColumnatiStkSwSysUplinkBPortIdBase | read-only | current | The ID of the first port in uplink #B of this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.21 | ColumnatiStkSwSysUplinkBPortIdLimit | read-only | current | The ID of the last port in uplink #B of this module. |
| 1.3.6.1.4.1.207.8.17.1.3.1.22 | ColumnatiStkSwSysRPSPresent | read-only | current | This object shows the presence of the RPS (Redundant Power Supply.) Note: This is not available on the 83xx switch family. |
| 1.3.6.1.4.1.207.8.17.1.3.1.23 | ColumnatiStkSwSysRPSState | read-only | current | This object shows if the connected RPS is on (supplying power) or off (not supplying power) to this switch. Note: This is not available on the 83xx switch fami… |
| 1.3.6.1.4.1.207.8.17.1.3.1.24 | ColumnatiStkSwSysDCState | read-only | current | This object shows if the main Power Source is DC. Note: If this is Off and RPS State is off, then the AC Main is supllying power. Note: This is not available o… |
| 1.3.6.1.4.1.207.8.17.1.3.1.25 | ColumnatiStkSwSysTemperatureLimitValue | read-only | current | This object specifies the temperature value when it is above the Warning or Error limits. |
| 1.3.6.1.4.1.207.8.17.1.4 | TableatiStkSwSysUplinkInfoTable | not-accessible | current | This table contains a list of uplinks present in the switch stack and their associated hardware information. |
| 1.3.6.1.4.1.207.8.17.1.4.1 | RowatiStkSwSysUplinkInfoEntry | not-accessible | current | This object specifies an entry in 'atiStkSwSysUplinkInfoTable' that describes the hardware informaton for a uplink present in the switch stack. **Note:This tab… |
| 1.3.6.1.4.1.207.8.17.1.4.1.1 | ColumnatiStkSwSysUplinkModuleId | read-only | current | The ID of this module. |
| 1.3.6.1.4.1.207.8.17.1.4.1.2 | ColumnatiStkSwSysUplinkPortId | read-only | current | The ID (port number) of the this port (uplink) of this module. |
| 1.3.6.1.4.1.207.8.17.1.4.1.3 | ColumnatiStkSwSysUplinkSetup | read-only | current | The fixation of the uplink. Fixed types are GBICs, SFPs or XFPs that are an integral part of the sytem. Disjoint items are applique or module slots that are de… |
| 1.3.6.1.4.1.207.8.17.1.4.1.4 | ColumnatiStkSwSysUplinkType | read-only | current | The module type of the uplink connector of this module. |
| 1.3.6.1.4.1.207.8.17.1.4.1.5 | ColumnatiStkSwSysUplinkDetails | read-only | current | This field will provide additional details to the Uplink. For GBIC, SFP or XFP, it may contain information on the installed devices (e.g. 1000-SX, 1000-T, etc)… |
| 1.3.6.1.4.1.207.8.17.1.4.1.6 | ColumnatiStkSwSysUplinkPortType | read-only | current | The hardware type of a port present in the uplink connector of this module. |
| 1.3.6.1.4.1.207.8.17.1.5 | NodeatiStkSwSysSystemTimeConfig | |||
| 1.3.6.1.4.1.207.8.17.1.5.1 | ScalaratiStkSwSysCurrentTime | read-write | current | This object specify the current time of the system. The user can change the time by providing the string format as an input, e.g. HH:MM:SS. |
| 1.3.6.1.4.1.207.8.17.1.5.2 | ScalaratiStkSwSysCurrentDate | read-write | current | This object specify the current time of the system. The user can change the date by providing the string format as an input, e.g. DD:MM:YYYY. |
| 1.3.6.1.4.1.207.8.17.1.5.3 | ScalaratiStkSwSysSNTPStatus | read-write | current | Enable/disable the SNTP status. |
| 1.3.6.1.4.1.207.8.17.1.5.4 | ScalaratiStkSwSysSNTPServerIPAddress | read-write | current | The ipaddress of the SNTP Server. |
| 1.3.6.1.4.1.207.8.17.1.5.5 | ScalaratiStkSwSysSNTPUTCOffset | read-write | current | Set the UTC Offset value within the range from -12 to 12 in hours. |
| 1.3.6.1.4.1.207.8.17.1.5.6 | ScalaratiStkSwSysSNTPDSTStatus | read-write | current | Enable/disble the Daylight Saving Time. |
| 1.3.6.1.4.1.207.8.17.1.5.7 | ScalaratiStkSwSysSNTPPollingInterval | read-write | current | Setting the interval for polling the SNTP Server. The polling time range is between 60 and 1200 in seconds. |
| 1.3.6.1.4.1.207.8.17.1.5.8 | ScalaratiStkSwSysSNTPLastDelta | read-only | current | Display the last adjustment to system done in seconds. |
| 1.3.6.1.4.1.207.8.17.1.6 | NodeatiStkSwSysInfoGroup | |||
| 1.3.6.1.4.1.207.8.17.1.6.1 | TableatiStkSwTemperatureInfoTable | not-accessible | current | This table contains a list of system temperature information present in the switch stack including voltage and temperature. |
| 1.3.6.1.4.1.207.8.17.1.6.1.1 | RowatiStkSwTemperatureInfoEntry | not-accessible | current | This object specifies an entry in 'atiStkSwTemperatureInfoTable' that describes the hardware informaton for a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.1.6.1.1.1 | ColumnatiStkSwTemperatureInfoModuleId | read-only | current | The module Id of a switch, it also used as an index of the table. |
| 1.3.6.1.4.1.207.8.17.1.6.1.1.2 | ColumnatiStkSwTemperatureInfoTemperature | read-only | current | The temperature of the device in Celcius. |
| 1.3.6.1.4.1.207.8.17.1.6.2 | TableatiStkSwFanInfoTable | not-accessible | current | This table contains information for all the fans present in the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.2.1 | RowatiStkSwFanInfoEntry | not-accessible | current | This object specifies an entry in 'atiStkSwFanInfoTable' that describes the informaton for a specific fan in the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.2.1.1 | ColumnatiStkSwFanInfoModuleId | read-only | current | The module Id of the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.2.1.2 | ColumnatiStkSwFanInfoFanId | read-only | current | The fan Id of the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.2.1.3 | ColumnatiStkSwFanInfoState | read-only | current | The state of the fan running, either normal or off. |
| 1.3.6.1.4.1.207.8.17.1.6.2.1.4 | ColumnatiStkSwFanInfoSpeed | read-only | current | The current speed of a fan. |
| 1.3.6.1.4.1.207.8.17.1.6.3 | TableatiStkSwVoltageInfoTable | not-accessible | current | This table contains a list of system Voltage information. |
| 1.3.6.1.4.1.207.8.17.1.6.3.1 | RowatiStkSwVoltageInfoEntry | not-accessible | current | This object specifies an entry in 'atiStkSwVoltageInfoTable' that describes the Voltage informaton for the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.3.1.1 | ColumnatiStkSwVoltageInfoModuleId | read-only | current | The module Id of the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.3.1.2 | ColumnatiStkSwVoltageInfoIndex | read-only | current | The index of the voltage table. |
| 1.3.6.1.4.1.207.8.17.1.6.3.1.3 | ColumnatiStkSwVoltageInfoLevel | read-only | current | The voltage input level. |
| 1.3.6.1.4.1.207.8.17.1.6.3.1.4 | ColumnatiStkSwVoltageInfoMeasured | read-only | current | The current voltage. |
| 1.3.6.1.4.1.207.8.17.1.6.4 | TableatiStkSwCPUInfoTable | not-accessible | current | This table contains information about the cpu utilization over different periods of time. |
| 1.3.6.1.4.1.207.8.17.1.6.4.1 | RowatiStkSwCPUInfoEntry | not-accessible | current | This object specifies an entry in 'atiStkSwCPUInfoTable' that describes the cpu informaton for the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.4.1.1 | ColumnatiStkSwCPUInfoModuleId | read-only | current | The module Id of the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.4.1.2 | ColumnatiStkSwCPUInfoAvgLastMinute | read-only | current | Average CPU utilization over the past minute. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.17.1.6.4.1.3 | ColumnatiStkSwCPUInfoAvgLast20Seconds | read-only | current | Average CPU utilization over the past twenty seconds. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.17.1.6.4.1.4 | ColumnatiStkSwCPUInfoAvgSecond | read-only | current | Average CPU utilization over the past second. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.17.1.6.5 | NodeatiStkSwMemoryGroup | |||
| 1.3.6.1.4.1.207.8.17.1.6.5.1 | TableatiStkSwMemoryInfoTable | not-accessible | current | This table contains information about memory size on module. |
| 1.3.6.1.4.1.207.8.17.1.6.5.1.1 | RowatiStkSwMemoryInfoEntry | not-accessible | current | This object specifies an entry in 'atiStkSwMemoryInfoTable' that describes the memory size for the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.5.1.1.1 | ColumnatiStkSwMemoryInfoModuleId | read-only | current | The module Id of the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.5.1.1.2 | ColumnatiStkSwMemoryInfoTotalBuffers | read-only | current | Size of memory buffer(kB). |
| 1.3.6.1.4.1.207.8.17.1.6.5.2 | TableatiStkSwMemoryPoolTable | not-accessible | current | This table contains information about each memory pool. |
| 1.3.6.1.4.1.207.8.17.1.6.5.2.1 | RowatiStkSwMemoryPoolEntry | not-accessible | current | This object specifies an entry in 'atiStkSwMemoryPoolTable' that describes the total and free size of each memory pool. |
| 1.3.6.1.4.1.207.8.17.1.6.5.2.1.1 | ColumnatiStkSwMemoryPoolModuleId | read-only | current | The module Id of the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.5.2.1.2 | ColumnatiStkSwMemoryPoolIndex | read-only | current | The index of memory pool. |
| 1.3.6.1.4.1.207.8.17.1.6.5.2.1.3 | ColumnatiStkSwMemoryPoolName | read-only | current | The name of memory pool. |
| 1.3.6.1.4.1.207.8.17.1.6.5.2.1.4 | ColumnatiStkSwMemoryPoolTotal | read-only | current | Size of memory pool(kB). |
| 1.3.6.1.4.1.207.8.17.1.6.5.2.1.5 | ColumnatiStkSwMemoryPoolFree | read-only | current | Size of free memory pool(kB). |
| 1.3.6.1.4.1.207.8.17.1.6.5.3 | TableatiStkSwMemoryComBuffersTable | not-accessible | current | This table contains information about communication buffers on module. |
| 1.3.6.1.4.1.207.8.17.1.6.5.3.1 | RowatiStkSwMemoryComBuffersEntry | not-accessible | current | This object specifies an entry in 'atiStkSwMemoryComBuffersTable' that describes the communication buffers. |
| 1.3.6.1.4.1.207.8.17.1.6.5.3.1.1 | ColumnatiStkSwMemoryComBuffersModuleId | read-only | current | The module Id of the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.5.3.1.2 | ColumnatiStkSwMemoryTotalComBuffers | read-only | current | Total number of communication buffers. |
| 1.3.6.1.4.1.207.8.17.1.6.5.3.1.3 | ColumnatiStkSwMemoryFreeComBuffers | read-only | current | Free communication buffers still available. |
| 1.3.6.1.4.1.207.8.17.1.7 | NodeatiStkSwSysMgmtACLGroup | |||
| 1.3.6.1.4.1.207.8.17.1.7.1 | ScalaratiStkSwSysMgmtACLStatus | read-write | current | Enable/Disable management ACL feature. |
| 1.3.6.1.4.1.207.8.17.1.7.2 | TableatiStkSwSysMgmtACLConfigTable | not-accessible | current | This table contains a list of MgmtACLs present in the switch stack and their associated hardware information. |
| 1.3.6.1.4.1.207.8.17.1.7.2.1 | RowatiStkSwSysMgmtACLConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwSysMgmtACLConfigTable' that allow the user controls which management stations can remotely manage the device using t… |
| 1.3.6.1.4.1.207.8.17.1.7.2.1.1 | ColumnatiStkSwSysMgmtACLConfigModuleId | read-only | current | The ID of this module. |
| 1.3.6.1.4.1.207.8.17.1.7.2.1.2 | ColumnatiStkSwSysMgmtACLConfigId | read-only | current | The ID of the Management ACL Table for this module. |
| 1.3.6.1.4.1.207.8.17.1.7.2.1.3 | ColumnatiStkSwSysMgmtACLConfigIpAddr | read-write | current | The IP Address of the specific management station. |
| 1.3.6.1.4.1.207.8.17.1.7.2.1.4 | ColumnatiStkSwSysMgmtACLConfigMask | read-write | current | The subnet mask of the IP Address. |
| 1.3.6.1.4.1.207.8.17.1.7.2.1.5 | ColumnatiStkSwSysMgmtACLConfigApplication | read-write | current | This object specify which interface the user want the management station to be able to use when managing the switch. The options are : telnet, web, ping, all. … |
| 1.3.6.1.4.1.207.8.17.1.7.2.1.6 | ColumnatiStkSwSysMgmtACLConfigRowStatus | read-write | current | The Row Status of the Mgmt ACL table. |
| 1.3.6.1.4.1.207.8.17.2 | NodeatiStkSwPortGroup | |||
| 1.3.6.1.4.1.207.8.17.2.1 | TableatiStkSwPortConfigTable | not-accessible | current | This table contains a list of physical ports present in the switch and their associated attributes. |
| 1.3.6.1.4.1.207.8.17.2.1.1 | RowatiStkSwPortConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwPortConfigTable' that describes the attributes associated with a physical port present in the switch. |
| 1.3.6.1.4.1.207.8.17.2.1.1.1 | ColumnatiStkSwModuleId | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.2.1.1.2 | ColumnatiStkSwPortId | read-only | current | This object specifies the ID of a port present on a given module. |
| 1.3.6.1.4.1.207.8.17.2.1.1.3 | ColumnatiStkSwPortName | read-write | current | The user-defined ASCII name of the port. |
| 1.3.6.1.4.1.207.8.17.2.1.1.4 | ColumnatiStkSwPortState | read-write | current | This object allows the user to either enabled or disabled. This object can be read to obtain the current state of the port. |
| 1.3.6.1.4.1.207.8.17.2.1.1.5 | ColumnatiStkSwPortLinkState | read-only | current | This object specifies the link state on this port. |
| 1.3.6.1.4.1.207.8.17.2.1.1.6 | ColumnatiStkSwPortNegotiation | read-write | current | This object allows an admin request to configure the port to either autosense or one of the different speed-duplex combinations. |
| 1.3.6.1.4.1.207.8.17.2.1.1.7 | ColumnatiStkSwPortSpeed | read-only | current | This object specifies the current speed of the port. |
| 1.3.6.1.4.1.207.8.17.2.1.1.8 | ColumnatiStkSwPortDuplexStatus | read-only | current | This object specifies the current duplex type used by the port. |
| 1.3.6.1.4.1.207.8.17.2.1.1.9 | ColumnatiStkSwPortFlowControl | read-write | current | This object is used to enable/disable flow control on the port. When enabled, flow control will be full duplex. Flow control is disabled by default. |
| 1.3.6.1.4.1.207.8.17.2.1.1.10 | ColumnatiStkSwPortBackPressure | read-write | current | This object is used to enable/disable Back Pressure on the port. Back Pressure is disabled by default. |
| 1.3.6.1.4.1.207.8.17.2.1.1.11 | ColumnatiStkSwPortPriority | read-write | current | This object specifies whether packets flowing through this port use the associated VLAN priority or override the associated VLAN priority with either a high or… |
| 1.3.6.1.4.1.207.8.17.2.1.1.12 | ColumnatiStkSwPortBroadcastProcessing | read-write | current | This object specifies whether the received broadcast packets should be processed or discarded. Broadcast packets are processed by default. |
| 1.3.6.1.4.1.207.8.17.2.1.1.13 | ColumnatiStkSwPortMDIO | read-write | current | This object is used to set the MDIO of this port for required cable connection type. For straight-through cable set to mdi and for cross-over cable set to mdix. |
| 1.3.6.1.4.1.207.8.17.2.1.1.14 | ColumnatiStkSwPortHOLLimit | read-write | current | This object allows user to set the head of line blocking limit. Note (94xx): Range upto 8191 is supported for Gigabit Ports. |
| 1.3.6.1.4.1.207.8.17.2.1.1.15 | ColumnatiStkSwPortBackPressureLimit | read-write | current | This object is used to set the MDIO of this port for required cable connection type. For straight-through cable set to mdi and for cross-over cable set to mdix… |
| 1.3.6.1.4.1.207.8.17.2.1.1.16 | ColumnatiStkSwPortSTPState | read-only | current | This object specifies the spanning tree state on this port. This object is not applicable to 8300 series products. This object is not valid on the 9400 series … |
| 1.3.6.1.4.1.207.8.17.2.2 | NodeatiStkSwPortMirroringConfig | |||
| 1.3.6.1.4.1.207.8.17.2.2.1 | ScalaratiStkSwPortMirroringState | read-write | current | This object specifies whether port mirroring is l2-enabled, or disabled on the switch. Note that, when enabled, both transmit and receive packets will be mirro… |
| 1.3.6.1.4.1.207.8.17.2.2.2 | ScalaratiStkSwPortMirroringSourceModuleId | read-write | current | This object specifies the module ID of the source port that is mirrored. All packets transmitted and received on the source port will be mirrored onto the dest… |
| 1.3.6.1.4.1.207.8.17.2.2.3 | ScalaratiStkSwPortMirroringSourcePortId | read-write | current | This object specifies the port ID (on the module specified by 'atiStkSwPortMirroringSourceModuleId') of the source port that is mirrored. All packets transmitt… |
| 1.3.6.1.4.1.207.8.17.2.2.4 | ScalaratiStkSwPortMirroringDestinationModuleId | read-write | current | This object specifies the module ID of the destination port that mirrors the source port (specified by 'atiStkSwPortMirroringSourceModuleId' and 'atiStkSwPortM… |
| 1.3.6.1.4.1.207.8.17.2.2.5 | ScalaratiStkSwPortMirroringDestinationPortId | read-write | current | This object specifies the port ID (on the module specified by 'atiStkSwPortMirroringDestinationModuleId') of the destination port that mirrors the source port … |
| 1.3.6.1.4.1.207.8.17.2.2.6 | ScalaratiStkSwPortMirroringSourceRxList | read-write | current | This object specifies a list of ports that are mirrored for ingress traffic. All packets received on these ports will be mirrored onto the mirror port (atiStkS… |
| 1.3.6.1.4.1.207.8.17.2.2.7 | ScalaratiStkSwPortMirroringSourceTxList | read-write | current | This object specifies a list of ports that are mirrored for egress traffic. All packets transmitted from these ports will be mirrored onto the mirror port (ati… |
| 1.3.6.1.4.1.207.8.17.2.3 | NodeatiStkSwPortSecurityConfig | |||
| 1.3.6.1.4.1.207.8.17.2.3.1 | ScalaratiStkSwPortSecurityMode | read-write | current | This object specifies the type of port security configured on the switch. Setting this object to 'automatic(1)' allows the ports to learn new MAC addresses nor… |
| 1.3.6.1.4.1.207.8.17.2.4 | TableatiStkSwPortIntrusionDetectionTable | not-accessible | current | This table contains a list of modules and their associated port security -related intrusion detection options. This table is valid only when 'atiStkSwPortSecur… |
| 1.3.6.1.4.1.207.8.17.2.4.1 | RowatiStkSwPortIntrusionDetectionEntry | not-accessible | current | This object specifies an entry in 'atiStkSwPortIntrusionDetectionTable' that describes port security -related intruder detection configuration associated with … |
| 1.3.6.1.4.1.207.8.17.2.4.1.1 | ColumnatiStkSwPortIntrusionDetectionAction | read-write | current | This object specifies the security action that should be taken when an intrusion is detected. |
| 1.3.6.1.4.1.207.8.17.2.4.1.2 | ColumnatiStkSwPortIntrusionDetectionPortList | read-write | current | This object specifies a list of ports on this module that participate in intrusion detection. |
| 1.3.6.1.4.1.207.8.17.2.5 | TableatiStkPortSecurityConfigTable | not-accessible | current | This table contains the port security attributes of a list of physical ports present in the switch. This table object is not applicable to 8300 series products. |
| 1.3.6.1.4.1.207.8.17.2.5.1 | RowatiStkPortSecurityConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkPortSecurityConfigTable' that describes the port security attributes associated with a physical port present in the sw… |
| 1.3.6.1.4.1.207.8.17.2.5.1.1 | ColumnatiStkPortSecurityMode | read-write | current | This object specifies the type of port security configured on the switch. Setting this object to 'automatic(1)' allows the ports to learn new MAC addresses nor… |
| 1.3.6.1.4.1.207.8.17.2.5.1.2 | ColumnatiStkPortSecurityThreshold | read-write | current | This object specifies the security threshold on this port. It is applicable only if the port security mode (specified by 'portSecurityMode') is set to 'limited… |
| 1.3.6.1.4.1.207.8.17.2.5.1.3 | ColumnatiStkPortIntrusionAction | read-write | current | This object specifies the security action that should be taken when an intrusion is detected. By default, port intrusion action is set to 'discard' mode. |
| 1.3.6.1.4.1.207.8.17.2.5.1.4 | ColumnatiStkPortIntrusionActionStatus | read-write | current | This object enables or disables the security action specified by the 'portIntrusionAction'. By default, port intrusion action is disabled. |
| 1.3.6.1.4.1.207.8.17.2.6 | NodeatiStkDOSConfig | |||
| 1.3.6.1.4.1.207.8.17.2.6.1 | ScalaratiStkDOSConfigLANIpAddress | read-write | current | The IP address of LAN. This object is not applicable to 8300 series products. |
| 1.3.6.1.4.1.207.8.17.2.6.2 | ScalaratiStkDOSConfigLANSubnetMask | read-write | current | The subnet mask of LAN. This object is not applicable to 8300 series products. |
| 1.3.6.1.4.1.207.8.17.2.6.3 | TableatiStkPortDOSAttackConfigTable | not-accessible | current | This table contains the port DOS (denial of service) attack configuration attributes of a list of physical ports present in the switch. This table object is no… |
| 1.3.6.1.4.1.207.8.17.2.6.3.1 | RowatiStkPortDOSAttackConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkPortDOSAttackConfigTable' that describes the port DOS attack configuration attributes associated with a physical port … |
| 1.3.6.1.4.1.207.8.17.2.6.3.1.1 | ColumnatiStkSwPortDOSAttackType | read-write | current | This object specifies the type of Port DOS attack configured on the switch. |
| 1.3.6.1.4.1.207.8.17.2.6.3.1.2 | ColumnatiStkSwPortDOSAttackActionStatus | read-write | current | This object enables or disables the port DOS action specified by the 'atiStkSwPortDOSAttackType'. By default, port DOS attack action is disabled. |
| 1.3.6.1.4.1.207.8.17.2.6.3.1.3 | ColumnatiStkSwPortDOSAttackMirrorPort | read-only | obsolete | This object specifies the mirror port number to which the packet are to be mirrored for the DOS attack as specified by atiStkSwPortDOSAttackType. |
| 1.3.6.1.4.1.207.8.17.2.6.3.1.4 | ColumnatiStkSwPortDOSAttackMirrorPortStatus | read-write | current | This object enables or disables mirroring of attack packets. If enabled, all potential attack packets are mirrored to the port specified by atiStkSwPortMirrori… |
| 1.3.6.1.4.1.207.8.17.2.7 | TableatiStkSwIntrusionAttackTable | not-accessible | current | This object specifies an entry in 'atiStkSwIntrusionAttackTable' that describes the intruder attack associated with a physical port present in the switch. |
| 1.3.6.1.4.1.207.8.17.2.7.1 | RowatiStkSwIntrusionAttackEntry | not-accessible | current | This object specifies an entry in 'atiStkSwIntrusionAttackTable' that describes the intruder attack associated with a physical port present in the switch. |
| 1.3.6.1.4.1.207.8.17.2.7.1.1 | ColumnatiStkSwIntruderAttackVlanId | read-only | current | This object identifies the intruding VlanId on the port for this module. |
| 1.3.6.1.4.1.207.8.17.2.7.1.2 | ColumnatiStkSwIntruderAttackMacAddr | read-only | current | This object identifies the intruding MAC address on the port for this module. |
| 1.3.6.1.4.1.207.8.17.2.8 | TableatiStkSwPortStormDetectCurrentTable | not-accessible | current | This table contains the current Storm Detection informations of a list of physical ports present in the switch. |
| 1.3.6.1.4.1.207.8.17.2.8.1 | RowatiStkSwPortStormDetectCurrentEntry | not-accessible | current | This object specifies an entry in 'atiStkSwPortStormDetectCurrentTable' that describes the current Storm Detection informations with a physical port present in… |
| 1.3.6.1.4.1.207.8.17.2.8.1.1 | ColumnatiStkSwPortStormDetectCurrentHighStatus | read-only | current | This object specifies the current high rate status of Storm Detection. |
| 1.3.6.1.4.1.207.8.17.2.8.1.2 | ColumnatiStkSwPortStormDetectCurrentHighAction | read-only | current | This object specifies the current high rate action by Storm Detected. |
| 1.3.6.1.4.1.207.8.17.2.8.1.3 | ColumnatiStkSwPortStormDetectCurrentHighExpiry | read-only | current | This object specifies the remaining time(sec) to back to normal status from blocking status of high rate. A value of -1 indicates that Blocktimeout has been se… |
| 1.3.6.1.4.1.207.8.17.2.8.1.4 | ColumnatiStkSwPortStormDetectCurrentLowStatus | read-only | current | This object specifies the current low rate status of Storm Detection. |
| 1.3.6.1.4.1.207.8.17.2.8.1.5 | ColumnatiStkSwPortStormDetectCurrentLowAction | read-only | current | This object specifies the current low rate action by Storm Detected. |
| 1.3.6.1.4.1.207.8.17.2.8.1.6 | ColumnatiStkSwPortStormDetectCurrentLowExpiry | read-only | current | This object specifies the remaining time(sec) to back to normal loop status from blocking status of low rate. A value of -1 indicates that Blocktimeout has bee… |
| 1.3.6.1.4.1.207.8.17.2.9 | TableatiStkSwPortLoopDetectCurrentTable | not-accessible | current | This table contains the current Loop Detection informations of a list of physical ports present in the switch. |
| 1.3.6.1.4.1.207.8.17.2.9.1 | RowatiStkSwPortLoopDetectCurrentEntry | not-accessible | current | This object specifies an entry in 'atiStkSwPortLoopDetectCurrentTable' that describes the current Loop Detection informations with a physical port present in t… |
| 1.3.6.1.4.1.207.8.17.2.9.1.1 | ColumnatiStkSwPortLoopDetectCurrentStatus | read-only | current | This object specifies the current loop status of Loop Detection. |
| 1.3.6.1.4.1.207.8.17.2.9.1.2 | ColumnatiStkSwPortLoopDetectCurrentAction | read-only | current | This object specifies the current loop action by Loop Detected. |
| 1.3.6.1.4.1.207.8.17.2.9.1.3 | ColumnatiStkSwPortLoopDetectCurrentExpiry | read-only | current | This object specifies the remaining time(sec) to back to normal status from blocking status. A value of -1 indicates that Blocktimeout has been set 'None' or L… |
| 1.3.6.1.4.1.207.8.17.2.9.1.4 | ColumnatiStkSwPortLoopDetectCurrentVlanId | read-only | current | The ID of the VLAN loop occured. |
| 1.3.6.1.4.1.207.8.17.3 | NodeatiStkSwVlanGroup | |||
| 1.3.6.1.4.1.207.8.17.3.1 | TableatiStkSwVlanConfigTable | not-accessible | current | This table contains a list of VLANs configured on the switch. |
| 1.3.6.1.4.1.207.8.17.3.1.1 | RowatiStkSwVlanConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwVlanConfigTable' that describes a VLAN configured on the switch. |
| 1.3.6.1.4.1.207.8.17.3.1.1.1 | ColumnatiStkSwVlanId | read-only | current | The VLAN ID of this VLAN as stored in the tag information header in accordance with the 802.1q specifications. |
| 1.3.6.1.4.1.207.8.17.3.1.1.2 | ColumnatiStkSwVlanName | read-write | current | The name of the VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.3 | ColumnatiStkSwVlanTaggedPortListModule1 | read-write | current | This object specifies a list of tagged ports (on module #1) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.4 | ColumnatiStkSwVlanUntaggedPortListModule1 | read-write | current | This object specifies a list of untagged ports (on module #1) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.5 | ColumnatiStkSwVlanTaggedPortListModule2 | read-write | current | This object specifies a list of tagged ports (on module #2) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.6 | ColumnatiStkSwVlanUntaggedPortListModule2 | read-write | current | This object specifies a list of untagged ports (on module #2) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.7 | ColumnatiStkSwVlanTaggedPortListModule3 | read-write | current | This object specifies a list of tagged ports (on module #3) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.8 | ColumnatiStkSwVlanUntaggedPortListModule3 | read-write | current | This object specifies a list of untagged ports (on module #3) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.9 | ColumnatiStkSwVlanTaggedPortListModule4 | read-write | current | This object specifies a list of tagged ports (on module #4) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.10 | ColumnatiStkSwVlanUntaggedPortListModule4 | read-write | current | This object specifies a list of untagged ports (on module #4) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.11 | ColumnatiStkSwVlanTaggedPortListModule5 | read-write | current | This object specifies a list of tagged ports (on module #5) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.12 | ColumnatiStkSwVlanUntaggedPortListModule5 | read-write | current | This object specifies a list of untagged ports (on module #5) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.13 | ColumnatiStkSwVlanTaggedPortListModule6 | read-write | current | This object specifies a list of tagged ports (on module #6) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.14 | ColumnatiStkSwVlanUntaggedPortListModule6 | read-write | current | This object specifies a list of untagged ports (on module #6) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.15 | ColumnatiStkSwVlanTaggedPortListModule7 | read-write | current | This object specifies a list of tagged ports (on module #7) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.16 | ColumnatiStkSwVlanUntaggedPortListModule7 | read-write | current | This object specifies a list of untagged ports (on module #7) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.17 | ColumnatiStkSwVlanTaggedPortListModule8 | read-write | current | This object specifies a list of tagged ports (on module #8) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.18 | ColumnatiStkSwVlanUntaggedPortListModule8 | read-write | current | This object specifies a list of untagged ports (on module #8) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.19 | ColumnatiStkSwVlanConfigEntryStatus | read-create | current | The current status of this VLAN entry. Please note the RowStatus implementation details. VLANs can be created with a CreateandWait or CreateAndGo RowStatus. Wh… |
| 1.3.6.1.4.1.207.8.17.3.1.1.20 | ColumnatiStkSwVlanActualUntaggedPortListModule1 | read-only | current | This object specifies the list of actual untagged ports that are participating in this VLAN. The untagged port membership can be temporarily changed by 802.1x … |
| 1.3.6.1.4.1.207.8.17.3.2 | TableatiStkSwPort2VlanTable | not-accessible | current | This tables contains a list of ports in the switch and their associated VLAN configuration information. |
| 1.3.6.1.4.1.207.8.17.3.2.1 | RowatiStkSwPort2VlanEntry | not-accessible | current | This object specifies an entry in 'atiStkSwPort2VlanTable' that describes the VLAN information associated with a given module/port. |
| 1.3.6.1.4.1.207.8.17.3.2.1.1 | ColumnatiStkSwPortVlanId | read-only | current | The ID of the VLAN to which this port belongs. |
| 1.3.6.1.4.1.207.8.17.3.2.1.2 | ColumnatiStkSwPortVlanName | read-only | current | The name of the VLAN to which this port belongs. |
| 1.3.6.1.4.1.207.8.17.3.3 | TableatiStkSwMacAddr2VlanTable | not-accessible | current | This table contains a list of MAC addresses (in the forwarding table of the switch) and the associated VLAN to which each MAC address belongs. |
| 1.3.6.1.4.1.207.8.17.3.3.1 | RowatiStkSwMacAddr2VlanEntry | not-accessible | current | This object specifies an entry in 'atiStkSwMacAddr2VlanTable' that associates a MAC address (in the forwarding table of the switch) with the VLAN to which the … |
| 1.3.6.1.4.1.207.8.17.3.3.1.1 | ColumnatiStkSwMacAddress | read-only | current | A MAC address from the forwarding table of the switch. |
| 1.3.6.1.4.1.207.8.17.3.3.1.2 | ColumnatiStkSwMacAddrVlanId | read-only | current | The ID of the VLAN to which this MAC address belongs. |
| 1.3.6.1.4.1.207.8.17.3.3.1.3 | ColumnatiStkSwMacAddrVlanName | read-only | current | The name of the VLAN to which this MAC address belongs. |
| 1.3.6.1.4.1.207.8.17.3.3.1.4 | ColumnatiStkSwMacAddrModuleId | read-only | current | The module ID on which this MAC address entry exists. |
| 1.3.6.1.4.1.207.8.17.3.3.1.5 | ColumnatiStkSwMacAddrPortId | read-only | current | The port ID (on the module specified by 'atiStkSwMacAddrModuleId') on which this MAC address entry exists. This will display 0 for a multicast mac address. Ple… |
| 1.3.6.1.4.1.207.8.17.3.3.1.6 | ColumnatiStkSwMacAddrPortList | read-only | current | The port List (on the module specified by 'atiStkSwMacAddrModuleId') on which this MAC address entry exists. This is shown as U: Untagged Ports T: Tagged Ports. |
| 1.3.6.1.4.1.207.8.17.3.4 | ScalaratiStkSwVlanMode | read-write | current | This object specifies the current VLAN mode. Setting this object to 'user-configured (1)' allows the manager to create, delete and modify VLANs using atiStkSwV… |
| 1.3.6.1.4.1.207.8.17.3.5 | ScalaratiStkSwVlanUplinkVlanPort | read-write | current | This object specifies the Uplink VLAN Port ID used while creating pre-configured VLANs. This object can be set to any valid Port ID present on the switch. Note… |
| 1.3.6.1.4.1.207.8.17.3.6 | NodeatiStkSwGVRPConfig | |||
| 1.3.6.1.4.1.207.8.17.3.6.1 | ScalaratiStkSwGVRPStatus | read-write | current | Enabled/Disabled GVRP on a switch basis. |
| 1.3.6.1.4.1.207.8.17.3.6.2 | ScalaratiStkSwGVRPGIPStatus | read-write | current | Enabled/Disabled GARP Information Propagation (GIP) on a switch basis. |
| 1.3.6.1.4.1.207.8.17.3.6.3 | ScalaratiStkSwGVRPJoinTimer | read-write | current | Specifies the Join Timer in centi seconds, (1/100th of seconds), The default is 20 centi seconds. |
| 1.3.6.1.4.1.207.8.17.3.6.4 | ScalaratiStkSwGVRPLeaveTimer | read-write | current | Specifies the Leave Timer in centi seconds, (1/100th of seconds), The default is 60 centi seconds. |
| 1.3.6.1.4.1.207.8.17.3.6.5 | ScalaratiStkSwGVRPLeaveAllTimer | read-write | current | Specifies the Leave All Timer in centi seconds, (1/100th of seconds), The default is 1000 centi seconds. |
| 1.3.6.1.4.1.207.8.17.3.7 | TableatiStkSwGVRPPortConfigTable | not-accessible | current | This table is configuring the GVRP Vlan base on each port. |
| 1.3.6.1.4.1.207.8.17.3.7.1 | RowatiStkSwGVRPPortConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwGVRPPortConfigTable'. |
| 1.3.6.1.4.1.207.8.17.3.7.1.1 | ColumnatiStkSwGVRPPortConfigModuleId | read-only | current | An ID that indicate which module it refer to for stacking. |
| 1.3.6.1.4.1.207.8.17.3.7.1.2 | ColumnatiStkSwGVRPPortConfigPortId | read-only | current | Port Index. |
| 1.3.6.1.4.1.207.8.17.3.7.1.3 | ColumnatiStkSwGVRPPortConfigStatus | read-write | current | Port Status for GVRP Vlan either Normal or Mode can be set. |
| 1.3.6.1.4.1.207.8.17.3.8 | TableatiStkSwGVRPCountersTable | not-accessible | current | This table is configuring the GVRP Vlan base on each port. |
| 1.3.6.1.4.1.207.8.17.3.8.1 | RowatiStkSwGVRPCountersEntry | not-accessible | current | This object specifies an entry in 'atiStkSwGVRPCountersTable'. |
| 1.3.6.1.4.1.207.8.17.3.8.1.1 | ColumnatiStkSwGVRPCountersModuleId | read-only | current | An ID that indicate which module it refer to for stacking. |
| 1.3.6.1.4.1.207.8.17.3.8.1.2 | ColumnatiStkSwGVRPCountersGARPRxPkt | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.3 | ColumnatiStkSwGVRPCountersInvalidGARPRxPkt | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.4 | ColumnatiStkSwGVRPCountersGARPTxPkt | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.5 | ColumnatiStkSwGVRPCountersGARPTxDisabled | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.6 | ColumnatiStkSwGVRPCountersPortNotSending | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.7 | ColumnatiStkSwGVRPCountersGARPDisabled | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.8 | ColumnatiStkSwGVRPCountersPortNotListening | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.9 | ColumnatiStkSwGVRPCountersInvalidPort | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.10 | ColumnatiStkSwGVRPCountersInvalidProtocol | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.11 | ColumnatiStkSwGVRPCountersInvalidFormat | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.12 | ColumnatiStkSwGVRPCountersDatabaseFull | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.13 | ColumnatiStkSwGVRPCountersRxMsgLeaveAll | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.14 | ColumnatiStkSwGVRPCountersRxMsgJoinEmpty | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.15 | ColumnatiStkSwGVRPCountersRxMsgJoinIn | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.16 | ColumnatiStkSwGVRPCountersRxMsgLeaveEmpty | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.17 | ColumnatiStkSwGVRPCountersRxMsgLeaveIn | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.18 | ColumnatiStkSwGVRPCountersRxMsgEmpty | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.19 | ColumnatiStkSwGVRPCountersRxMsgBadMsg | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.20 | ColumnatiStkSwGVRPCountersRxMsgBadAttribute | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.21 | ColumnatiStkSwGVRPCountersTxMsgLeaveAll | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.22 | ColumnatiStkSwGVRPCountersTxMsgJoinEmpty | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.23 | ColumnatiStkSwGVRPCountersTxMsgJoinIn | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.24 | ColumnatiStkSwGVRPCountersTxMsgLeaveEmpty | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.25 | ColumnatiStkSwGVRPCountersTxMsgLeaveIn | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.26 | ColumnatiStkSwGVRPCountersTxMsgEmpty | read-only | current | |
| 1.3.6.1.4.1.207.8.17.4 | NodeatiStkSwMacAddrGroup | |||
| 1.3.6.1.4.1.207.8.17.4.1 | TableatiStkSwStaticMacAddrTable | not-accessible | current | This table contains a list of static MAC address configured on the switch. |
| 1.3.6.1.4.1.207.8.17.4.1.1 | RowatiStkSwStaticMacAddrEntry | not-accessible | current | This object is an entry in 'atiStkSwStaticMacAddrTable' that describes a static MAC address configured on a given module and port. |
| 1.3.6.1.4.1.207.8.17.4.1.1.1 | ColumnatiStkSwStaticMacAddress | read-only | current | This object identifies the static MAC address of this entry. |
| 1.3.6.1.4.1.207.8.17.4.1.1.2 | ColumnatiStkSwStaticMacAddrVlanId | read-only | current | The ID of the VLAN on which this static MAC address entry is configured. |
| 1.3.6.1.4.1.207.8.17.4.1.1.3 | ColumnatiStkSwStaticMacAddrModuleId | read-write | current | The module ID on which this static MAC address entry is configured. |
| 1.3.6.1.4.1.207.8.17.4.1.1.4 | ColumnatiStkSwStaticMacAddrPortId | read-write | current | The port ID (on the module specified by 'atiStkSwStaticMacAddrModuleId') on which this static MAC address entry is configured. Note: a) When defining a list th… |
| 1.3.6.1.4.1.207.8.17.4.1.1.5 | ColumnatiStkSwStaticMacAddrPortList | read-write | current | The port list (on the module specified by 'atiStkSwStaticMacAddrModuleId') on which this static MAC address entry is configured. This can be a single port for … |
| 1.3.6.1.4.1.207.8.17.4.1.1.6 | ColumnatiStkSwStaticMacAddrEntryStatus | read-create | current | The current status of this static MAC address entry. |
| 1.3.6.1.4.1.207.8.17.5 | NodeatiStkSwEthStatsGroup | |||
| 1.3.6.1.4.1.207.8.17.5.1 | TableatiStkSwEthModuleMonTable | not-accessible | current | This table contains a list of modules and their associated ethernet statistics (measured on the module as a whole). |
| 1.3.6.1.4.1.207.8.17.5.1.1 | RowatiStkSwEthModuleMonEntry | not-accessible | current | This object specifies an entry in 'atiStkSwEthModuleMonTable' that describes the ethernet statistics measured on a given module as a whole. |
| 1.3.6.1.4.1.207.8.17.5.1.1.1 | ColumnatiStkSwEthModuleMonTxGoodFrames | read-only | current | The total number of good frames transmitted by this module. |
| 1.3.6.1.4.1.207.8.17.5.1.1.2 | ColumnatiStkSwEthModuleMonRxGoodFrames | read-only | current | The total number of good frames received by this module. |
| 1.3.6.1.4.1.207.8.17.5.1.1.3 | ColumnatiStkSwEthModuleMonTxTotalBytes | read-only | current | The total number of bytes transmitted by this module. |
| 1.3.6.1.4.1.207.8.17.5.1.1.4 | ColumnatiStkSwEthModuleMonTxBroadcastFrames | read-only | current | The total number of broadcast frames transmitted from this module. |
| 1.3.6.1.4.1.207.8.17.5.1.1.5 | ColumnatiStkSwEthModuleMonTxMulticastFrames | read-only | current | The total number of multicast frames transmitted from this module. |
| 1.3.6.1.4.1.207.8.17.5.1.1.6 | ColumnatiStkSwEthModuleMonRxOverrunFrames | read-only | current | The total number of oversized frames received on this module. |
| 1.3.6.1.4.1.207.8.17.5.2 | TableatiStkSwEthModuleErrTable | not-accessible | current | This table contains a list of modules and their associated ethernet error statistics (measured on the module as a whole). |
| 1.3.6.1.4.1.207.8.17.5.2.1 | RowatiStkSwEthModuleErrEntry | not-accessible | current | This object specifies an entry in 'atiStkSwEthModuleErrTable' that describes the ethernet error statistics measured on a given module as a whole. |
| 1.3.6.1.4.1.207.8.17.5.2.1.1 | ColumnatiStkSwEthModuleErrRxCRC | read-only | current | The total number of CRC errors on packets received on this module. |
| 1.3.6.1.4.1.207.8.17.5.2.1.2 | ColumnatiStkSwEthModuleErrRxBadFrames | read-only | current | The total number of bad frames received on this module. |
| 1.3.6.1.4.1.207.8.17.5.2.1.3 | ColumnatiStkSwEthModuleErrCollisions | read-only | current | The number of times a collision was detected on this module. |
| 1.3.6.1.4.1.207.8.17.5.3 | TableatiStkSwEthPortMonTable | not-accessible | current | This table contains a list of ports and their associated ethernet statistics. |
| 1.3.6.1.4.1.207.8.17.5.3.1 | RowatiStkSwEthPortMonEntry | not-accessible | current | This object specifies an entry in 'atiStkSwEthPortMonTable' that describes the ethernet statistics measured on a given module/port. |
| 1.3.6.1.4.1.207.8.17.5.3.1.1 | ColumnatiStkSwEthPortMonTxGoodFrames | read-only | current | The total number of good frames transmitted by this port. |
| 1.3.6.1.4.1.207.8.17.5.3.1.2 | ColumnatiStkSwEthPortMonRxGoodFrames | read-only | current | The total number of good frames received by this port. |
| 1.3.6.1.4.1.207.8.17.5.3.1.3 | ColumnatiStkSwEthPortMonTxTotalBytes | read-only | current | The total number of bytes transmitted by this port. |
| 1.3.6.1.4.1.207.8.17.5.3.1.4 | ColumnatiStkSwEthPortMonTxBroadcastFrames | read-only | current | The total number of broadcast frames transmitted from this port. |
| 1.3.6.1.4.1.207.8.17.5.3.1.5 | ColumnatiStkSwEthPortMonTxMulticastFrames | read-only | current | The total number of broadcast frames transmitted from this port. |
| 1.3.6.1.4.1.207.8.17.5.3.1.6 | ColumnatiStkSwEthPortMonRxOverrunFrames | read-only | current | The total number of oversized frames received on this port. |
| 1.3.6.1.4.1.207.8.17.5.4 | TableatiStkSwEthPortErrTable | not-accessible | current | This table contains a list of ports and their associated ethernet error statistics. |
| 1.3.6.1.4.1.207.8.17.5.4.1 | RowatiStkSwEthPortErrEntry | not-accessible | current | This object specifies an entry in 'atiStkSwEthPortErrTable' that describes the ethernet error statistics measured on a given module/port. |
| 1.3.6.1.4.1.207.8.17.5.4.1.1 | ColumnatiStkSwEthPortErrRxBadFrames | read-only | current | The total number of bad frames received on this port. |
| 1.3.6.1.4.1.207.8.17.5.4.1.2 | ColumnatiStkSwEthPortErrCollisions | read-only | current | The number of times a collision was detected on this port. |
| 1.3.6.1.4.1.207.8.17.6 | NodeatiStkSwTrapsGroup | |||
| 1.3.6.1.4.1.207.8.17.6.1 | NotificationatiStkSwFanStopTrap | current | This trap is sent out when an error in the fan operation is detected in a module. | |
| 1.3.6.1.4.1.207.8.17.6.2 | NotificationatiStkSwTemperatureAbnormalTrap | obsolete | This trap is sent out when the temperature of a module becomes abnormal. | |
| 1.3.6.1.4.1.207.8.17.6.3 | NotificationatiStkSwIntrusionDetectionTrap | current | This trap is sent out when an intrusion is detected on a port in the switch and the port security has been configured to send traps. It includes the mac addres… | |
| 1.3.6.1.4.1.207.8.17.6.4 | NotificationatiStkSwDOSTrap | current | This trap is sent out when DOS (Denial of Service) attack is detected on a port in the switch and the port security has been configured to send traps. This tra… | |
| 1.3.6.1.4.1.207.8.17.6.5 | NotificationatiStkSwSTPPortStateChangeTrap | current | This trap is sent out when STP port state changes due to RSTP/MSTP topology changes in the switch. This trap is not applicable to 8300 series products. | |
| 1.3.6.1.4.1.207.8.17.6.6 | NotificationatiStkSwSTPTrunkStateChangeTrap | current | This trap is sent out when STP trunk state changes due to RSTP/MSTP topology changes in the switch. This trap is not applicable to 8300 series products. | |
| 1.3.6.1.4.1.207.8.17.6.7 | NotificationatiStkSwSysRPSStateChangedTrap | current | This trap is sent out when the RPS(redundant Power Supply) changes state in the switch. Please read the description of the notification objects and their state… | |
| 1.3.6.1.4.1.207.8.17.6.8 | ScalaratiStkSwTrapVarMgmtType | read-only | current | Type of management interface that was last disabled due to continuos invalid logins. This variable is a placeholder for the object sent in the atiStkSwMgmtDisa… |
| 1.3.6.1.4.1.207.8.17.6.9 | ScalaratiStkSwTrapVarMgmtIpAddr | read-only | current | IP address of the management station that had continuos invalid logins. This variable is a placeholder for the object sent in the atiStkSwMgmtDisabledTrap, but… |
| 1.3.6.1.4.1.207.8.17.6.15 | NotificationatiStkSwMgmtDisabledTrap | current | This trap is sent out when a management interface is disabled due to continuos invalid logins. This trap is not applicable to 8300 series products. | |
| 1.3.6.1.4.1.207.8.17.6.16 | NotificationatiStkSwTemperatureLimitTrap | current | This trap is send when the system temperature crosses threshold values defined for different temperature levels, e.g. high (warning) temperature, critical (err… | |
| 1.3.6.1.4.1.207.8.17.6.17 | NotificationatiStkSwFanOkTrap | current | This trap is sent out when a fan become running Ok. | |
| 1.3.6.1.4.1.207.8.17.6.18 | NotificationatiStkSwTemperatureNormalTrap | current | This trap is sent out when it is generated when system temperature become normal. | |
| 1.3.6.1.4.1.207.8.17.6.19 | NotificationatiStkSwHighRateStormDetectedTrap | current | This trap is sent out when Storm Detection function detects a received packets rate is over the configured high rate threshold. | |
| 1.3.6.1.4.1.207.8.17.6.20 | NotificationatiStkSwWarningHighRateStormBlockedTrap | current | This trap is sent out when Storm Detection function blocks a port with over a received packets high rate threshold. | |
| 1.3.6.1.4.1.207.8.17.6.21 | NotificationatiStkSwRecoverHighRateStormBlockedTrap | current | This trap is sent out when Storm Detection function gets a blocked port back to normal. | |
| 1.3.6.1.4.1.207.8.17.6.22 | NotificationatiStkSwLowRateStormDetectedTrap | current | This trap is sent out when Storm Detection function detects a received packets rate is over the configured row rate threshold. | |
| 1.3.6.1.4.1.207.8.17.6.23 | NotificationatiStkSwWarningLowRateStormBlockedTrap | current | This trap is sent out when Storm Detection function blocks a port with over a received packets low rate threshold. | |
| 1.3.6.1.4.1.207.8.17.6.24 | NotificationatiStkSwRecoverLowRateStormBlockedTrap | current | This trap is sent out when Storm Detection function gets a blocked port back to normal. | |
| 1.3.6.1.4.1.207.8.17.6.25 | NotificationatiStkSwStackTopologyChangeTrap | current | This trap is sent out when there is a topology change in the stack. Either one or more stack member is added or deleted. | |
| 1.3.6.1.4.1.207.8.17.6.26 | NotificationatiStkSwBPDUGuardIsTriggeredTrap | current | This trap is sent out when a BPDU guard detects a spoofed BPDU entering the STP system thru the edge port. The BPDU guard will disable the port and notify the … | |
| 1.3.6.1.4.1.207.8.17.6.27 | NotificationatiStkSwLoopDetectedTrap | current | This trap is sent out when the switch detects a loop by receivig LDF packet. | |
| 1.3.6.1.4.1.207.8.17.6.28 | NotificationatiStkSwWarningLoopBlockedTrap | current | This trap is sent out when Loop Detection function blocks a port. | |
| 1.3.6.1.4.1.207.8.17.6.29 | NotificationatiStkSwRecoverLoopBlockedTrap | current | This trap is sent out when Loop Detection function gets a blocked port back to normal. | |
| 1.3.6.1.4.1.207.8.17.7 | NodeatiStkSwQoSGroup | |||
| 1.3.6.1.4.1.207.8.17.7.1 | ScalaratiStkSwQoSGroupNumberOfQueues | read-only | current | This object gives a count of the CoS Queues supported by the chipset. This object is not applicable to 8300 series products. |
| 1.3.6.1.4.1.207.8.17.7.2 | ScalaratiStkSwQoSGroupSchedulingMode | read-write | current | This object allows to configure QOS scheduling mode. This object is not applicable to 8300 series products. |
| 1.3.6.1.4.1.207.8.17.7.3 | TableatiStkSwQoSGroupCoSToQueueTable | not-accessible | current | This table object allows to configure queue for each CoS (Class fo Service) priority. This table object is not applicable to 8300 series products. |
| 1.3.6.1.4.1.207.8.17.7.3.1 | RowatiStkSwQoSGroupCoSToQueueEntry | not-accessible | current | This object specifies an entry in 'atiStkSwQoSGroupCoSToQueueTable' that describes the mapping of CoS priorities to corresponding Cos Queues. |
| 1.3.6.1.4.1.207.8.17.7.3.1.1 | ColumnatiStkSwQoSGroupCoSPriority | read-only | current | This object specifies the CoS priority. |
| 1.3.6.1.4.1.207.8.17.7.3.1.2 | ColumnatiStkSwQoSGroupCoSQueue | read-write | current | This object specifies the queue for each CoS priority. Please note that the 94xx supports 8 levels, however, the 85xx supports 4 levels. |
| 1.3.6.1.4.1.207.8.17.7.4 | TableatiStkSwQoSGroupQueueToWeightTable | not-accessible | current | This object allows to configure weight for each CoS (Class fo Service) queue . This object table is not applicable to 8300 series products. |
| 1.3.6.1.4.1.207.8.17.7.4.1 | RowatiStkSwQoSGroupQueueToWeightEntry | not-accessible | current | This object specifies an entry in 'atiStkSwQoSGroupQueueToWeightTable' that describes the mapping of CoS queues to corresponding weights. |
| 1.3.6.1.4.1.207.8.17.7.4.1.1 | ColumnatiStkSwQoSGroupQueue | read-only | current | This object specifies the queue. Please note that the 94xx supports 8 levels, however, the 85xx supports 4 levels. |
| 1.3.6.1.4.1.207.8.17.7.4.1.2 | ColumnatiStkSwQoSGroupQueueWeight | read-write | current | This object specifies the queue weight for each queue. |
| 1.3.6.1.4.1.207.8.17.7.5 | TableatiStkSwQosFlowGrpTable | not-accessible | current | This table contains a list of modules present in the switch stack and their associated hardware information. |
| 1.3.6.1.4.1.207.8.17.7.5.1 | RowatiStkSwQosFlowGrpEntry | not-accessible | current | This object specifies an entry in 'atiStkSwQosFlowGrpTable' that describes the hardware informaton for a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.7.5.1.1 | ColumnatiStkSwQosFlowGrpModuleId | read-only | current | An index that corresponds to which module the data is retrieved with stacking capability. |
| 1.3.6.1.4.1.207.8.17.7.5.1.2 | ColumnatiStkSwQosFlowGrpId | read-only | current | An index that corresponds to specific Flow Group base on Id within Flow Group list. |
| 1.3.6.1.4.1.207.8.17.7.5.1.3 | ColumnatiStkSwQosFlowGrpDescription | read-write | current | The description of a specific Flow Group. |
| 1.3.6.1.4.1.207.8.17.7.5.1.4 | ColumnatiStkSwQosFlowGrpDSCPValue | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.5.1.5 | ColumnatiStkSwQosFlowGrpPriority | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.5.1.6 | ColumnatiStkSwQosFlowGrpRemarkPriority | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.5.1.7 | ColumnatiStkSwQosFlowGrpTos | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.5.1.8 | ColumnatiStkSwQosFlowGrpTosToPriority | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.5.1.9 | ColumnatiStkSwQosFlowGrpPriorityToTos | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.5.1.10 | ColumnatiStkSwQosFlowGrpClassifierList | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.5.1.11 | ColumnatiStkSwQosFlowGrpRowStatus | read-create | current | |
| 1.3.6.1.4.1.207.8.17.7.6 | TableatiStkSwQosTrafficClassTable | not-accessible | current | This table contains a list of modules present in the switch stack and their associated hardware information. |
| 1.3.6.1.4.1.207.8.17.7.6.1 | RowatiStkSwQosTrafficClassEntry | not-accessible | current | This object specifies an entry in 'atiStkSwQosTrafficClassTable' that describes the hardware informaton for a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.7.6.1.1 | ColumnatiStkSwQosTrafficClassModuleId | read-only | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.2 | ColumnatiStkSwQosTrafficClassId | read-only | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.3 | ColumnatiStkSwQosTrafficClassDescription | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.4 | ColumnatiStkSwQosTrafficClassExceedAction | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.5 | ColumnatiStkSwQosTrafficClassExceedRemarkValue | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.6 | ColumnatiStkSwQosTrafficClassDSCPValue | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.7 | ColumnatiStkSwQosTrafficClassMaxBandwidth | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.8 | ColumnatiStkSwQosTrafficClassBurstSize | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.9 | ColumnatiStkSwQosTrafficClassPriority | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.10 | ColumnatiStkSwQosTrafficClassRemarkPriority | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.11 | ColumnatiStkSwQosTrafficClassToS | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.12 | ColumnatiStkSwQosTrafficClassMoveToSToPriority | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.13 | ColumnatiStkSwQosTrafficClassMovePriorityToToS | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.14 | ColumnatiStkSwQosTrafficClassFlowGroupList | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.6.1.15 | ColumnatiStkSwQosTrafficClassRowStatus | read-create | current | |
| 1.3.6.1.4.1.207.8.17.7.7 | TableatiStkSwQosPolicyTable | not-accessible | current | This table contains a list of modules present in the switch stack and their associated hardware information. |
| 1.3.6.1.4.1.207.8.17.7.7.1 | RowatiStkSwQosPolicyEntry | not-accessible | current | This object specifies an entry in 'atiStkSwQosPolicyTable' that describes the hardware informaton for a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.7.7.1.1 | ColumnatiStkSwQosPolicyModuleId | read-only | current | |
| 1.3.6.1.4.1.207.8.17.7.7.1.2 | ColumnatiStkSwQosPolicyId | read-only | current | |
| 1.3.6.1.4.1.207.8.17.7.7.1.3 | ColumnatiStkSwQosPolicyDescription | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.7.1.4 | ColumnatiStkSwQosPolicyRemarkDSCP | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.7.1.5 | ColumnatiStkSwQosPolicyDSCPValue | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.7.1.6 | ColumnatiStkSwQosPolicyToS | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.7.1.7 | ColumnatiStkSwQosPolicyMoveToSToPriority | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.7.1.8 | ColumnatiStkSwQosPolicyMovePriorityToToS | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.7.1.9 | ColumnatiStkSwQosPolicySendToMirrorPort | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.7.1.10 | ColumnatiStkSwQosPolicyTrafficClassList | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.7.1.11 | ColumnatiStkSwQosPolicyRedirectPort | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.7.1.12 | ColumnatiStkSwQosPolicyIngressPortList | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.7.1.13 | ColumnatiStkSwQosPolicyEgressPortList | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.7.1.14 | ColumnatiStkSwQosPolicyRowStatus | read-create | current | |
| 1.3.6.1.4.1.207.8.17.7.8 | TableatiStkSwQoSGroupPortCoSPriorityTable | not-accessible | current | This table object allows to configure port priority for each CoS (Class of Service) priority. This table object is not applicable to 8300 series products. |
| 1.3.6.1.4.1.207.8.17.7.8.1 | RowatiStkSwQoSGroupPortCoSPriorityEntry | not-accessible | current | This object specifies an entry in 'atiStkSwQoSGroupPortCoSPriorityTable' it defines the CoS priority for each port, and the priority defined for a port should … |
| 1.3.6.1.4.1.207.8.17.7.8.1.1 | ColumnatiStkSwQoSGroupPortCoSPriorityModuleId | read-only | current | This object specifies the Module Id of the table. |
| 1.3.6.1.4.1.207.8.17.7.8.1.2 | ColumnatiStkSwQoSGroupPortCoSPriorityPortId | read-only | current | This object specifies the IfIndex of the table. |
| 1.3.6.1.4.1.207.8.17.7.8.1.3 | ColumnatiStkSwQoSGroupPortCoSPriorityPriority | read-write | current | This object specifies the priority for each port CoS priority. |
| 1.3.6.1.4.1.207.8.17.7.8.1.4 | ColumnatiStkSwQoSGroupPortCoSPriorityOverridePriority | read-write | current | This object specifies the override priority for each port CoS priority. |
| 1.3.6.1.4.1.207.8.17.8 | NodeatiStkSwTrunkGroup | |||
| 1.3.6.1.4.1.207.8.17.8.1 | TableatiStkSwStaticTrunkTable | not-accessible | current | This table contains a list of static trunk configuration present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.8.1.1 | RowatiStkSwStaticTrunkEntry | not-accessible | current | This object specifies an entry in 'atiStkSwStaticTrunkTable' that describes the static trunk informaton for a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.8.1.1.1 | ColumnatiStkSwStaticTrunkModuleId | read-only | current | An identifier for switch stack. |
| 1.3.6.1.4.1.207.8.17.8.1.1.2 | ColumnatiStkSwStaticTrunkIndex | read-only | current | An index for a trunk entry. |
| 1.3.6.1.4.1.207.8.17.8.1.1.3 | ColumnatiStkSwStaticTrunkId | read-only | current | An identifier for a trunk. |
| 1.3.6.1.4.1.207.8.17.8.1.1.4 | ColumnatiStkSwStaticTrunkName | read-write | current | Name of a trunk, once the entry has created, it cannot be changed. |
| 1.3.6.1.4.1.207.8.17.8.1.1.5 | ColumnatiStkSwStaticTrunkMethod | read-write | current | Trunk distribution mode. |
| 1.3.6.1.4.1.207.8.17.8.1.1.6 | ColumnatiStkSwStaticTrunkPortList | read-write | current | A list of ports that used as a trunk port. |
| 1.3.6.1.4.1.207.8.17.8.1.1.7 | ColumnatiStkSwStaticTrunkStatus | read-only | current | The status of the trunk, either up or down. |
| 1.3.6.1.4.1.207.8.17.8.1.1.8 | ColumnatiStkSwStaticTrunkRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.207.8.17.9 | NodeatiStkSwACLGroup | |||
| 1.3.6.1.4.1.207.8.17.9.1 | TableatiStkSwACLConfigTable | not-accessible | current | This table contains a Access Control List (ACL) in the switch and their associated attributes. |
| 1.3.6.1.4.1.207.8.17.9.1.1 | RowatiStkSwACLConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwACLConfigTable' that describes the ACL in the switch. |
| 1.3.6.1.4.1.207.8.17.9.1.1.1 | ColumnatiStkSwACLModuleId | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.9.1.1.2 | ColumnatiStkSwACLId | read-only | current | This object specifies the ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.9.1.1.3 | ColumnatiStkSwACLDescription | read-write | current | The description of the ACL entry. |
| 1.3.6.1.4.1.207.8.17.9.1.1.4 | ColumnatiStkSwACLAction | read-write | current | The action of the ACL entry either deny or permit. |
| 1.3.6.1.4.1.207.8.17.9.1.1.5 | ColumnatiStkSwACLClassifierList | read-write | current | The classifier list of the entry. |
| 1.3.6.1.4.1.207.8.17.9.1.1.6 | ColumnatiStkSwACLPortList | read-write | current | The port list of the ACL entry. |
| 1.3.6.1.4.1.207.8.17.9.1.1.7 | ColumnatiStkSwACLRowStatus | read-write | current | The row status of the table. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtiPortType | INTEGER { other (1), notPresent (2), mgmt (3), tenBaseT (4), hundredBaseT (5), hundredBaseFX-VF (6), hundredBaseFX-MT (7), hundredBaseFX-SC (8), hundredBaseFX-LC (9), thousandBaseT (10), gigabit (11), gigabitSX (12), gigabitSX-SC (13), gigabitSX-MT (14), gigabitSX-VF (15), gigabitSX-LC (16), gigabitLX (17), gigabitLX-SC (18), gigabitLX-MT (19), gigabitLX-VF (20), gigabitLX-LC (21), sm15 (22), ten-gigabit (23) } | current | This data type is used to specify the syntax of objects describing the hardware port type. |
| AtiProductType | INTEGER { other (1), at8324 (2), at8316F-MT (3), at8316F-VF (4), at8316F-SC (5), at8524M (6), at8550GB (7), at8516F (8), at8550SP (9), at9424T-SP (10), at9424T-GB (11), at9408LC-SP (12), at8524-POE (13), at9424Ti-SP (14), at9448Ts-XP (15), at9448Ts (16), at9448T-SP (17), at9424Ts-XP (18), at9424Ts (19), at9424T (21), at9424T-POE (22), at9424TL (23) } | current | This data type is used to specify the syntax of objects describing the hardware product type. |
| AtiUplinkType | INTEGER { notPresent (1), other (2), applique-at-45-sc-sm (3), applique-at-45-sc (4), applique-at-45-mt (5), applique-at-46 (6), applique-at-47 (7), sfp (8), gbic (9), xfp (10) } | current | This data type is used to specify the syntax of objects confirming to the Allied Telesyn, Inc. uplink types. These are primarily used in the 85xx and 94xx family of switches. For all other releases, this may not be appl… |