BAS-CMTS-CONFIG-MIB
202 objects
This MIB module defines the configuration MIB objects for a Broadband Access System CMTS.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3493.2.4.1 | IdentitybasCmtsConfigMib | This MIB module defines the configuration MIB objects for a Broadband Access System CMTS. | ||
| 1.3.6.1.4.1.3493.2.4.1.1 | NodebasCmtsConfigObjects | |||
| 1.3.6.1.4.1.3493.2.4.1.1.1 | TablebasCmtsHeadEndTable | not-accessible | current | A list of HeadEndMgr settings. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.3493.2.4.1.1.1.1 | RowbasCmtsHeadEndEntry | not-accessible | current | An entry containing HeadEndMgr configuration settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127). |
| 1.3.6.1.4.1.3493.2.4.1.1.1.1.1 | ColumnbasCmtsHeDsChanId | read-write | current | CMTS downstream channel ID. |
| 1.3.6.1.4.1.3493.2.4.1.1.1.1.2 | ColumnbasCmtsHeHwMapTimerPeriodMicrosec | read-write | current | CMTS hardware Map timer period interval, in microseconds. |
| 1.3.6.1.4.1.3493.2.4.1.1.1.1.3 | ColumnbasCmtsHeImMapTimerPeriodMillisec | read-write | current | CMTS initial maintenance timer period interval, in milliseconds. |
| 1.3.6.1.4.1.3493.2.4.1.1.1.1.4 | ColumnbasCmtsHePerRngTimerPeriodSec | read-write | current | CMTS periodic ranging timer period interval, in seconds. |
| 1.3.6.1.4.1.3493.2.4.1.1.1.1.5 | ColumnbasCmtsHeUcdTimerPerMillisec | read-write | current | CMTS UCD periodic timer period interval, in milliseconds. |
| 1.3.6.1.4.1.3493.2.4.1.1.1.1.6 | ColumnbasCmtsHeMapMode | read-write | current | CMTS mape mode, either Normal or Scripted maps for test mode. Defaults to normal, free-running mode. |
| 1.3.6.1.4.1.3493.2.4.1.1.1.1.7 | ColumnbasCmtsHeMacAddr | read-only | current | CMTS HeadEndMgr Mac address. |
| 1.3.6.1.4.1.3493.2.4.1.1.1.1.8 | ColumnbasCmtsHeLenAuthString | read-write | current | CMTS HeadEndMgr authorization string length. |
| 1.3.6.1.4.1.3493.2.4.1.1.1.1.9 | ColumnbasCmtsHeAuthString | read-write | current | CMTS HeadEndMgr authorization string. |
| 1.3.6.1.4.1.3493.2.4.1.1.1.1.10 | ColumnbasCmtsHeRowAction | read-write | current | An action object used to effect an action. |
| 1.3.6.1.4.1.3493.2.4.1.1.1.1.11 | ColumnbasCmtsHePlantPropDelay | read-write | current | Plant propagation delay in microseconds. |
| 1.3.6.1.4.1.3493.2.4.1.1.1.1.12 | ColumnbasCmtsHeSupplMapLeadDelay | read-write | current | Supplemental map lead delay. |
| 1.3.6.1.4.1.3493.2.4.1.1.2 | TablebasCmtsMacTable | not-accessible | current | A list of BAS Mac settings. |
| 1.3.6.1.4.1.3493.2.4.1.1.2.1 | RowbasCmtsMacEntry | not-accessible | current | An entry containing BAS Mac configuration settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127). |
| 1.3.6.1.4.1.3493.2.4.1.1.2.1.1 | ColumnbasCmtsMacNumUsBds | read-write | current | Number of buffers allocated to handle upstream cable modem traffic, both control message and data message traffic. |
| 1.3.6.1.4.1.3493.2.4.1.1.2.1.2 | ColumnbasCmtsMacNumDsMsgBds | read-write | current | Number of buffers allocated to handle downstream cable modem control message traffic. |
| 1.3.6.1.4.1.3493.2.4.1.1.2.1.3 | ColumnbasCmtsMacNumDsDataBds | read-write | current | Number of buffers allocated to handle downstream cable modem data message traffic. |
| 1.3.6.1.4.1.3493.2.4.1.1.2.1.4 | ColumnbasCmtsMacNumIpBuffers | read-write | current | Number of buffers allocated to handle downstream cable modem data message traffic. If an IP packet is addressed to the CMTS Mac address, an IP Buffer is alloca… |
| 1.3.6.1.4.1.3493.2.4.1.1.2.1.5 | ColumnbasCmtsMacPciDmaSize | read-write | current | Maximum size of PCI bus DMA transaction, required by BCM3210. |
| 1.3.6.1.4.1.3493.2.4.1.1.2.1.6 | ColumnbasCmtsMacUpdateFirstParticleLast | read-write | current | MAC control register option flag: if true, then update first particle last. |
| 1.3.6.1.4.1.3493.2.4.1.1.2.1.7 | ColumnbasCmtsMacDirectModeDma | read-write | current | MAC control register option flag: if true, then enable direct mode DMA. |
| 1.3.6.1.4.1.3493.2.4.1.1.2.1.8 | ColumnbasCmtsMacPackedPart | read-write | current | Packed particle boolean, FALSE indicates 1 particle per packet. |
| 1.3.6.1.4.1.3493.2.4.1.1.2.1.9 | ColumnbasCmtsMacPackedPartOffset | read-write | current | Packed particle offset, offset for header length in packed particle. |
| 1.3.6.1.4.1.3493.2.4.1.1.2.1.10 | ColumnbasCmtsMacSpiClkDivider | read-write | current | Specifies the SPI Clock Divider. |
| 1.3.6.1.4.1.3493.2.4.1.1.2.1.11 | ColumnbasCmtsMacSyncRate | read-write | current | Specifies the downstream Sync control message interval. Units are millisec. Default rate is 10 millisec. |
| 1.3.6.1.4.1.3493.2.4.1.1.2.1.12 | ColumnbasCmtsMacRowAction | read-write | current | Row status. |
| 1.3.6.1.4.1.3493.2.4.1.1.3 | TablebasCmtsMacDsHwTable | not-accessible | current | A list of Bas Downstream settings. |
| 1.3.6.1.4.1.3493.2.4.1.1.3.1 | RowbasCmtsMacDsHwEntry | not-accessible | current | An entry containing Bas Mac DsHw configuration settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127). |
| 1.3.6.1.4.1.3493.2.4.1.1.3.1.1 | ColumnbasCmtsMacDsHwInterleaverDepth | read-write | current | Specifies Mac DsHw interleaver depth. |
| 1.3.6.1.4.1.3493.2.4.1.1.3.1.2 | ColumnbasCmtsMacDsHwQamctl | read-write | current | Specifies Mac DsHw QAM control. 0x03 = 64 QAM 0x05 = 256 QAM. |
| 1.3.6.1.4.1.3493.2.4.1.1.3.1.3 | ColumnbasCmtsMacDsHwSymbolRate | read-write | current | Specifies Mac DsHw symbol rate, in Units Baud. Typical values: 64 QAM - 5056941 baud (default) 256 QAM - 5360537 baud |
| 1.3.6.1.4.1.3493.2.4.1.1.3.1.4 | ColumnbasCmtsMacDsHwIfFreq | read-write | current | Specifies Mac DsHw downstream channel frequency, in Hz. |
| 1.3.6.1.4.1.3493.2.4.1.1.3.1.5 | ColumnbasCmtsMacDsHwRefFreq | read-write | current | Specifies Mac DsHw reference frequency, in Hz. |
| 1.3.6.1.4.1.3493.2.4.1.1.3.1.6 | ColumnbasCmtsMacDsHwOscMultFactor | read-write | current | Specifies Mac DsHw Osc Mult Factor. For Bcm3210, use: refFreq (MHz) MultFactor 114.0 1 28.5 4 28.322 4 20.48 6 |
| 1.3.6.1.4.1.3493.2.4.1.1.4 | TablebasCmtsUpstreamChannelTable | not-accessible | current | A list of HeadEndMgr settings. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.3493.2.4.1.1.4.1 | RowbasCmtsUpstreamChannelEntry | not-accessible | current | An entry containing HeadEndMgr configuration settings. An entry in this table exists for each ifEntry with an ifType of docsCableUpstream(129). |
| 1.3.6.1.4.1.3493.2.4.1.1.4.1.1 | ColumnbasCmtsUpChannelMslotPerTick | read-write | current | Minislot period, in ticks. |
| 1.3.6.1.4.1.3493.2.4.1.1.4.1.2 | ColumnbasCmtsUpChannelSymbolRate160KSymPerSec | read-write | current | Upstream channel symbol rate, in 1609KSym/second. |
| 1.3.6.1.4.1.3493.2.4.1.1.4.1.3 | ColumnbasCmtsUpChannelLenPreamblePattern | read-only | current | Upstream channel preamble pattern length. |
| 1.3.6.1.4.1.3493.2.4.1.1.4.1.4 | ColumnbasCmtsUpChannelPreamblePattern | read-only | current | Upstream channel preamble pattern. |
| 1.3.6.1.4.1.3493.2.4.1.1.4.1.5 | ColumnbasCmtsUpChannelRowAction | read-write | current | Row status. |
| 1.3.6.1.4.1.3493.2.4.1.1.4.1.6 | ColumnbasCmtsUpChannelReceivePower | read-write | current | Receive Power level that is desired at the CMTS in TenthdbMV |
| 1.3.6.1.4.1.3493.2.4.1.1.5 | TablebasCmtsModulationTable | not-accessible | current | A list of HeadEndMgr settings. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.3493.2.4.1.1.5.1 | RowbasCmtsModulationEntry | not-accessible | current | An entry containing HeadEndMgr configuration settings. |
| 1.3.6.1.4.1.3493.2.4.1.1.5.1.1 | ColumnbasCmtsModUwLenBytes | read-write | current | Length of unique word pattern, in bytes. [Note = Supported values are 1-3 for BCM3137. Default value is 1, equal to 4 symbols. |
| 1.3.6.1.4.1.3493.2.4.1.1.5.1.2 | ColumnbasCmtsModUwPattern | read-write | current | Content of unique word pattern. The number of bytes in the unique word pattern which are relevant is determined by basCmtsModUwLenBytes. |
| 1.3.6.1.4.1.3493.2.4.1.1.5.1.3 | ColumnbasCmtsModUwDetectionWindow | read-write | current | Time window around a nominal detection time in which the UW detector is enabled. |
| 1.3.6.1.4.1.3493.2.4.1.1.5.1.4 | ColumnbasCmtsModUwMismatchThresholdBits | read-write | current | Specifies precision of match between unique word pattern and incoming burst by specifying the number of bits which are allowed to NOT match. |
| 1.3.6.1.4.1.3493.2.4.1.1.5.1.5 | ColumnbasCmtsModPreambleValueOffset | read-only | current | Offset into preamble where value bits, or pattern, begins. |
| 1.3.6.1.4.1.3493.2.4.1.1.6 | TablebasCmtsUsHwTable | not-accessible | current | A list of HeadEndMgr settings. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1 | RowbasCmtsUsHwEntry | not-accessible | current | An entry containing HeadEndMgr configuration settings. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.1 | ColumnbasCmtsUsHwTestProbe | read-write | current | Bas Bcm3137 test/probe mode register. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.2 | ColumnbasCmtsUsHwGenCfg1 | read-write | current | Bas Bcm3137 general configuration register 1. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.3 | ColumnbasCmtsUsHwGenCfg2 | read-write | current | Bas Bcm3137 general configuration register 2. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.4 | ColumnbasCmtsUsHwPreambleCtl | read-write | current | Bas Bcm3137 preamble process control register. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.5 | ColumnbasCmtsUsHwCarrAcf | read-write | current | Bas Bcm3137 carrier acquisition loop coefficients. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.6 | ColumnbasCmtsUsHwCarrTcf | read-write | current | Bas Bcm3137 carrier tracking loop coefficients. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.7 | ColumnbasCmtsUsHwBaudAtcf | read-write | current | Bas Bcm3137 baud loop acquisition/tracking coefficients. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.8 | ColumnbasCmtsUsHwBaudIntcf | read-write | current | Bas Bcm3137 baud loop integrator coefficients. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.9 | ColumnbasCmtsUsHwMaxPwrThr | read-write | current | Bas Bcm3137 maximum power level threshold. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.10 | ColumnbasCmtsUsHwMinPwrThr | read-write | current | Bas Bcm3137 minimum power level threshold. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.11 | ColumnbasCmtsUsHwTimeErrThr | read-write | current | Bas Bcm3137 burst timing error threshold. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.12 | ColumnbasCmtsUsHwAdcClipCtl | read-write | current | Bas Bcm3137 ADC clipping detection control register. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.13 | ColumnbasCmtsUsHwLoopCheck | read-write | current | Bas Bcm3137 loop checking detection control register. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.14 | ColumnbasCmtsUsHwSlcrErrThr | read-write | current | Bas Bcm3137 slicer error threshold. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.15 | ColumnbasCmtsUsHwAfltSelThr | read-write | current | Bas Bcm3137 amplitude filter selection threshold. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.16 | ColumnbasCmtsUsHwBurstGain | read-write | current | Bas Bcm3137 burst gain adjusting factor register. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.17 | ColumnbasCmtsUsHwLoopCtl | read-write | current | Bas Bcm3137 loop control register. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.18 | ColumnbasCmtsUsHwEqRsCtl | read-write | current | Bas Bcm3137 equalizer/RS decoder control register. |
| 1.3.6.1.4.1.3493.2.4.1.1.6.1.19 | ColumnbasCmtsUsHwEqSteps | read-write | current | Bas Bcm3137 equalizer adaptation step size register. |
| 1.3.6.1.4.1.3493.2.4.1.1.7 | TablebasCmtsUsMapTable | not-accessible | current | A Upstream Channel Map Maker Settings. |
| 1.3.6.1.4.1.3493.2.4.1.1.7.1 | RowbasCmtsUsMapEntry | not-accessible | current | An entry containing Upstream Channel Map Maker configuration settings. |
| 1.3.6.1.4.1.3493.2.4.1.1.7.1.1 | ColumnbasCmtsUsMapMaxMapLenHwMapPeriods | read-write | current | Bas Upstream Channel MapMaker maximum map length, in units of hardware map timer periods. [Note: Set this value large enough to handle large packets, but small… |
| 1.3.6.1.4.1.3493.2.4.1.1.7.1.2 | ColumnbasCmtsUsMapInitMainRegionSizeMicrosec | read-write | current | Bas Upstream Channel MapMaker size of Initial Maint contention region, in microseconds. [Note: Maps with Initial Maint regions are sent periodically. Most maps… |
| 1.3.6.1.4.1.3493.2.4.1.1.7.1.3 | ColumnbasCmtsUsMapNewUcdGrantSizeMicrosec | read-write | current | Bas Upstream Channel MapMaker new UCD grant size. After a UCD change, this specifies the size of grant to null sid (which functions as a delay for CM's to dige… |
| 1.3.6.1.4.1.3493.2.4.1.1.7.1.4 | ColumnbasCmtsUsMapMaxDeferredRngIE | read-write | current | Bas Upstream Channel MapMaker maximum number of deferred ranging invitations per map. |
| 1.3.6.1.4.1.3493.2.4.1.1.7.1.5 | ColumnbasCmtsUsMapMapLeadTimeMillisec | read-only | deprecated | Bas Upstream Channel MapMaker map lead time, in milliseconds. |
| 1.3.6.1.4.1.3493.2.4.1.1.7.1.6 | ColumnbasCmtsUsMapRequestLimitMslot | read-write | current | Bas Upstream Channel MapMaker maximum size for request contention region, in mini-slots. |
| 1.3.6.1.4.1.3493.2.4.1.1.7.1.7 | ColumnbasCmtsUsMapMapLeadTime | read-only | current | Bas Upstream Channel MapMaker map lead time, in microseconds. |
| 1.3.6.1.4.1.3493.2.4.1.1.8 | TablebasCmtsUsRngTable | not-accessible | current | A Upstream Channel Range Finder Settings. |
| 1.3.6.1.4.1.3493.2.4.1.1.8.1 | RowbasCmtsUsRngEntry | not-accessible | current | An entry containing Upstream Channel Range Finder configuration settings. |
| 1.3.6.1.4.1.3493.2.4.1.1.8.1.1 | ColumnbasCmtsUsRngTimingOffsetThr | read-write | current | Bas Upstream Channel RangeFinder timing offset threshold. If timing offset reported by MAC chip is <= this threshold value, then timing adjustment may be stopp… |
| 1.3.6.1.4.1.3493.2.4.1.1.8.1.2 | ColumnbasCmtsUsRngFreqOffsetThr | read-write | current | Bas Upstream Channel RangeFinder frequency offset threshold. If frequency offset reported by MAC chip is <= this threshold value, then frequency adjustment may… |
| 1.3.6.1.4.1.3493.2.4.1.1.8.1.3 | ColumnbasCmtsUsRngPowerOffsetThr | read-write | current | Bas Upstream Channel RangeFinder power offset threshold. If power level offset reported by MAC chip is <= this threshold value, then power level adjustment may… |
| 1.3.6.1.4.1.3493.2.4.1.1.8.1.4 | ColumnbasCmtsUsRngPowerDesired | read-write | current | Bas Upstream Channel RangeFinder power desired. Desired linear power level. Used as reference when computing power adjustment. Units are a Broadcom defined (16… |
| 1.3.6.1.4.1.3493.2.4.1.1.8.1.5 | ColumnbasCmtsUsRngMaxIgnoredInvitations | read-only | current | Bas Upstream Channel RangeFinder maximum ignored invitations. Maximum ranging invitations that a CM may ignore before being considered quiet. |
| 1.3.6.1.4.1.3493.2.4.1.1.8.1.6 | ColumnbasCmtsUsRngCmRngInviteTimeout | read-write | current | Bas Upstream Channel RangeFinder cable modem range invite timeout. Minimum time allowed for a CM following receipt of a RNG-RSP before it is expected to reply … |
| 1.3.6.1.4.1.3493.2.4.1.1.8.1.7 | ColumnbasCmtsUsRngMaxPowerAdjQtrdb | read-write | current | Bas Upstream Channel RangeFinder maximum power adjustment for a particular RNG-RSP message, in 1/4dB units. |
| 1.3.6.1.4.1.3493.2.4.1.1.8.1.8 | ColumnbasCmtsUsRngZeroPowerAdj | read-write | current | Bas Upstream Channel RangeFinder zero power adjustment. If true, power adjustment item in range response message will be unconditionally set to 0. Useful for d… |
| 1.3.6.1.4.1.3493.2.4.1.1.8.1.9 | ColumnbasCmtsUsRngZeroTimingAdj | read-write | current | Bas Upstream Channel RangeFinder zero timing adjustment. If true, timing adjustment item in range response message will be unconditionally set to 0. Useful for… |
| 1.3.6.1.4.1.3493.2.4.1.1.8.1.10 | ColumnbasCmtsUsRngZeroFreqAdj | read-write | current | Bas Upstream Channel RangeFinder zero frequency adjustment. If true, frequency adjustment item in range response message will be unconditionally set to 0. Usef… |
| 1.3.6.1.4.1.3493.2.4.1.1.8.1.11 | ColumnbasCmtsUsRngRefPowerLevel | read-write | current | Reference power level for this upstream channel. |
| 1.3.6.1.4.1.3493.2.4.1.1.8.1.12 | ColumnbasCmtsUsRngCmPeriodicRngInviteTimeout | read-write | current | Used to space the ranging invitations, if the modem has completed ranging. |
| 1.3.6.1.4.1.3493.2.4.1.1.9 | TablebasCmtsServiceTable | not-accessible | current | The Service Table per MAC IF |
| 1.3.6.1.4.1.3493.2.4.1.1.9.1 | RowbasCmtsServiceEntry | not-accessible | current | An entry containing information for a particular SID |
| 1.3.6.1.4.1.3493.2.4.1.1.9.1.1 | ColumnbasCmtsServiceMacAddress | read-only | current | MAC address of this Cable Modem. If the Cable Modem has multiple MAC addresses, this is the MAC address associated with the Cable interface. |
| 1.3.6.1.4.1.3493.2.4.1.1.9.1.2 | ColumnbasCmtsServiceIpAddress | read-only | current | IP address of The CMTS. |
| 1.3.6.1.4.1.3493.2.4.1.1.9.1.3 | ColumnbasCmtsServiceAuthState | read-only | current | Auth State Object. |
| 1.3.6.1.4.1.3493.2.4.1.1.9.1.4 | ColumnbasCmtsServiceFilter | read-write | current | The Service Filter Object |
| 1.3.6.1.4.1.3493.2.4.1.1.9.1.5 | ColumnbasCmtsServiceCurrentNumHost | read-only | current | The Current number of host. |
| 1.3.6.1.4.1.3493.2.4.1.1.9.1.6 | ColumnbasCmtsServiceMaxNumHost | read-only | current | The max number of host |
| 1.3.6.1.4.1.3493.2.4.1.1.9.1.7 | ColumnbasCmtsServiceOutOctets | read-only | current | The number of service out octets. |
| 1.3.6.1.4.1.3493.2.4.1.1.9.1.8 | ColumnbasCmtsServiceOutPackets | read-only | current | The number of service out packets. |
| 1.3.6.1.4.1.3493.2.4.1.1.9.1.9 | ColumnbasCmtsServiceInDiscards | read-only | current | The number of input packets discarded. |
| 1.3.6.1.4.1.3493.2.4.1.1.9.1.10 | ColumnbasCmtsServiceOutDiscards | read-only | current | The number of output packets discarded. |
| 1.3.6.1.4.1.3493.2.4.1.1.9.1.11 | ColumnbasCmtsServiceBwReqCount | read-only | current | The bandwidth request count for this service. |
| 1.3.6.1.4.1.3493.2.4.1.1.9.1.12 | ColumnbasCmtsServiceDataGrantCount | read-only | current | The data grant count for this service. |
| 1.3.6.1.4.1.3493.2.4.1.1.10 | TablebasFlapControlTable | not-accessible | current | Defines the flap table control settings per MAC IF. A flap-list is a table maintained for every modem (active or not) that is having communication difficulties… |
| 1.3.6.1.4.1.3493.2.4.1.1.10.1 | RowbasFlapControlEntry | not-accessible | current | Defines the flap table control settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127). |
| 1.3.6.1.4.1.3493.2.4.1.1.10.1.1 | ColumnbasFlapCtlClearFlag | read-write | current | Flap list clear control flag. Setting this flag to 1 empties the flap-list table. |
| 1.3.6.1.4.1.3493.2.4.1.1.10.1.2 | ColumnbasFlapCtlMaxTableSize | read-write | current | Specifies the max size of the flap-list table. Setting table size to 0 disables flap-list table maintenance. |
| 1.3.6.1.4.1.3493.2.4.1.1.10.1.3 | ColumnbasFlapCtlAgingThresh | read-write | current | Specifies the number of days to age the cable modem from the flap list table. Setting the aging threshold to 0 results in modems never being aged from the tabl… |
| 1.3.6.1.4.1.3493.2.4.1.1.10.1.4 | ColumnbasFlapCtlInsTimeThresh | read-write | current | Specifies the insertion time threshold, in seconds. This threshold controls the operation of a flapping modem detector. When the link establishment rate of a m… |
| 1.3.6.1.4.1.3493.2.4.1.1.10.1.5 | ColumnbasFlapCtlPowerAdjThresh | read-write | current | Specifies the power-adjust threshold for recording a flap list event. When the power adjustment of a modem exceeds the threshold, the modem is placed in the fl… |
| 1.3.6.1.4.1.3493.2.4.1.1.11 | TablebasFlapTable | not-accessible | current | Defines the flap table per MAC IF and MacAddr. A flap-list is a table maintained for every modem (active or not) that is having communication difficulties. Fla… |
| 1.3.6.1.4.1.3493.2.4.1.1.11.1 | RowbasFlapEntry | not-accessible | current | Defines the flap table entries. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127) and for every MacAddress. |
| 1.3.6.1.4.1.3493.2.4.1.1.11.1.1 | ColumnbasFlapEntryMacAddress | read-only | current | |
| 1.3.6.1.4.1.3493.2.4.1.1.11.1.2 | ColumnbasFlapEntryUsChan | read-only | current | Specifies the upstream channel the specified modem is currently using. |
| 1.3.6.1.4.1.3493.2.4.1.1.11.1.3 | ColumnbasFlapEntryInsertCount | read-only | current | Specifies the number of time the modem comes up and inserts itself into the network. It can indicate intermittent downstream sync loss or DHCP or modem registr… |
| 1.3.6.1.4.1.3493.2.4.1.1.11.1.4 | ColumnbasFlapEntryHitCount | read-only | current | Specifies the number of time the modem responds to MAC layer keep alive messages. It can indicate intermittent upstream, laser clipping, or common-path distort… |
| 1.3.6.1.4.1.3493.2.4.1.1.11.1.5 | ColumnbasFlapEntryMissCount | read-only | current | Specifies the number of time the modem misses the MAC layer keep alive messages. It can indicate intermittent upstream, laser clipping, or common-path distorti… |
| 1.3.6.1.4.1.3493.2.4.1.1.11.1.6 | ColumnbasFlapEntryCRCErrCount | read-only | current | Specifies the number of Cyclic Redundancy Check errors from this modem. It can indicate intermittent upstream, laser clipping, or common-path distortion. |
| 1.3.6.1.4.1.3493.2.4.1.1.11.1.7 | ColumnbasFlapEntryPAdjCount | read-only | current | Specifies the number of times the headend instructed the modem to adjust transmit power more than the threshold-specified number of dB. It can indicate amplifi… |
| 1.3.6.1.4.1.3493.2.4.1.1.11.1.8 | ColumnbasFlapEntryFlapCount | read-only | current | Specifies the sum of basFlapEntryPAdjCount and basFlapEntryInsertCount. |
| 1.3.6.1.4.1.3493.2.4.1.1.11.1.9 | ColumnbasFlapEntryLastModemState | read-only | current | Specifies the modem state when this modem last flapped. State is as specified in the RF Interface Specification, and indicates the following events: other(1) A… |
| 1.3.6.1.4.1.3493.2.4.1.1.11.1.10 | ColumnbasFlapEntryInsertTime | read-only | current | Specifies the most recent time that the modem was inserted in the network. |
| 1.3.6.1.4.1.3493.2.4.1.1.11.1.11 | ColumnbasFlapEntryRemoveTime | read-only | current | Specifies the most recent time that the modem dropped the connection. |
| 1.3.6.1.4.1.3493.2.4.1.1.11.1.12 | ColumnbasFlapEntryLastBasModemState | read-only | current | Specifies the modem state when this modem last flapped. State is as specified in the basCmtsCmStatusValue mib. |
| 1.3.6.1.4.1.3493.2.4.1.1.12 | TablebasCmtsCmStatusTable | not-accessible | current | A list of CMTS CM status settings. |
| 1.3.6.1.4.1.3493.2.4.1.1.12.1 | RowbasCmtsCmStatusEntry | not-accessible | current | An entry in this table exists for each entry in the docsIfCmtsCmStatusTable. |
| 1.3.6.1.4.1.3493.2.4.1.1.12.1.1 | ColumnbasCmtsCmStatusAbortFlag | read-write | current | CMTS CM status clear control flag. Setting this flag to 1 causes a Range-Abort message to be sent to the cable modem. |
| 1.3.6.1.4.1.3493.2.4.1.1.12.1.2 | ColumnbasCmtsCmStatusPrimarySid | read-only | current | Primary SID of this modem. |
| 1.3.6.1.4.1.3493.2.4.1.1.12.1.3 | ColumnbasCmtsCmStatusValue | read-only | current | Specifies the modem state. |
| 1.3.6.1.4.1.3493.2.4.1.1.13 | TablebasCmtsUsStatsTable | not-accessible | current | Contains statistics for each upstream channel. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1 | RowbasCmtsUsStatsEntry | not-accessible | current | An entry containing statistics for each upstream channel. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.1 | ColumnbasCmtsUsStatsClearFlag | read-write | current | Writing any value to this mib clears all stats in this table. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.2 | ColumnbasCmtsUsStatsUSSlots | read-only | current | Number upstream data information elements in Maps. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.3 | ColumnbasCmtsUsStatsNoUW | read-only | current | Number upstream data packets with FEC No Unique Word. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.4 | ColumnbasCmtsUsStatsDataFECorHCSErr | read-only | current | Number upstream data packets with FEC or HCS Error. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.5 | ColumnbasCmtsUsStatsRequests | read-only | current | Number request slots allocated. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.6 | ColumnbasCmtsUsStatsRequestColl | read-only | current | Number request slots with collisions. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.7 | ColumnbasCmtsUsStatsReqFECorHCSErr | read-only | current | Number request slots corrupted by bad FEC or HCS. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.8 | ColumnbasCmtsUsStatsReqNoEnergy | read-only | current | Number request slots with no energy. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.9 | ColumnbasCmtsUsStatsReqData | read-only | current | Number request/data slots allocated. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.10 | ColumnbasCmtsUsStatsReqDataColl | read-only | current | Number request/data slots with collisions. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.11 | ColumnbasCmtsUsStatsReqDataFECorHCSErr | read-only | current | Number request/data slots with FEC or HCS errors. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.12 | ColumnbasCmtsUsStatsReqDataNoEnergy | read-only | current | Number request/data slots with no energy. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.13 | ColumnbasCmtsUsStatsRanging | read-only | current | Number upstream ranging packets received. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.14 | ColumnbasCmtsUsStatsRangeFECorHCSErr | read-only | current | Number ranging slots with FEC or HCS errors. |
| 1.3.6.1.4.1.3493.2.4.1.1.13.1.15 | ColumnbasCmtsUsStatsMapsTooLate | read-only | current | Number of Maps too late detected. |
| 1.3.6.1.4.1.3493.2.4.1.2 | NodebasCmtsDecodeObjects | |||
| 1.3.6.1.4.1.3493.2.4.1.2.1 | TablebasCmtsPktDecodeControlTable | not-accessible | current | A list of BAS cmts packet decode control objects. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1 | RowbasCmtsPktDecodeControlEntry | not-accessible | current | An entry containing BAS Packet decode control settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127). |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.1 | ColumnbasCmtsPktDecodeControlShowRx | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.2 | ColumnbasCmtsPktDecodeControlShowTx | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.3 | ColumnbasCmtsPktDecodeControlAnalyzeLevel | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.4 | ColumnbasCmtsPktDecodeControlFilterUcd | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.5 | ColumnbasCmtsPktDecodeControlFilterMap | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.6 | ColumnbasCmtsPktDecodeControlFilterRngReq | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.7 | ColumnbasCmtsPktDecodeControlFilterRngRsp | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.8 | ColumnbasCmtsPktDecodeControlFilterRegReq | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.9 | ColumnbasCmtsPktDecodeControlFilterRegRsp | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.10 | ColumnbasCmtsPktDecodeControlFilterUccReq | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.11 | ColumnbasCmtsPktDecodeControlFilterUccRsp | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.12 | ColumnbasCmtsPktDecodeControlFilterBpkmReq | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.13 | ColumnbasCmtsPktDecodeControlFilterBpkmRsp | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.14 | ColumnbasCmtsPktDecodeControlFilterPdu | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.1.1.15 | ColumnbasCmtsPktDecodeControlFilterBwReq | read-write | current | Decode control on/off. |
| 1.3.6.1.4.1.3493.2.4.1.2.2 | TablebasCmtsMapDecodeControlTable | not-accessible | current | A list of BAS cmts map decode control objects. |
| 1.3.6.1.4.1.3493.2.4.1.2.2.1 | RowbasCmtsMapDecodeControlEntry | not-accessible | current | An entry containing BAS MAP decode control settings. An entry in this table exists for each ifEntry with an ifType of docsCableMacLayer(127). |
| 1.3.6.1.4.1.3493.2.4.1.2.2.1.1 | ColumnbasCmtsMapDecodeControlTriggerMapPktCount | read-write | current | Data trigger. |
| 1.3.6.1.4.1.3493.2.4.1.2.2.1.2 | ColumnbasCmtsMapDecodeControlTriggerDataGrant | read-write | current | Data trigger. |
| 1.3.6.1.4.1.3493.2.4.1.2.2.1.3 | ColumnbasCmtsMapDecodeControlTriggerUcdChange | read-write | current | Data trigger. |
| 1.3.6.1.4.1.3493.2.4.1.2.2.1.4 | ColumnbasCmtsMapDecodeControlTriggerShortGrant | read-write | current | Data trigger. |
| 1.3.6.1.4.1.3493.2.4.1.2.2.1.5 | ColumnbasCmtsMapDecodeControlTriggerLongGrant | read-write | current | Data trigger. |
| 1.3.6.1.4.1.3493.2.4.1.2.2.1.6 | ColumnbasCmtsMapDecodeControlTriggerInitMaint | read-write | current | Data trigger. |
| 1.3.6.1.4.1.3493.2.4.1.2.2.1.7 | ColumnbasCmtsMapDecodeControlTriggerStationMaint | read-write | current | Data trigger. |
| 1.3.6.1.4.1.3493.2.4.1.2.2.1.8 | ColumnbasCmtsMapDecodeControlTriggerRequestIe | read-write | current | Data trigger. |
| 1.3.6.1.4.1.3493.2.4.1.3 | NodebasCmtsMacToSidObjects | |||
| 1.3.6.1.4.1.3493.2.4.1.3.1 | TablebasCmtsMacToSidTable | not-accessible | current | A list of BAS cmts mac to sid objects. |
| 1.3.6.1.4.1.3493.2.4.1.3.1.1 | RowbasCmtsMacToSidEntry | not-accessible | current | An entry containing BAS CMTS MAC to SID settings. |
| 1.3.6.1.4.1.3493.2.4.1.3.1.1.1 | ColumnbasCmtsMacToSidMacAddr | read-only | current | The MAC address of the host or the cable modem |
| 1.3.6.1.4.1.3493.2.4.1.3.1.1.2 | ColumnbasCmtsMacToSidServiceId | read-only | current | The SID of the host or the cable modem derived from the MAC |
| 1.3.6.1.4.1.3493.2.4.1.3.1.1.3 | ColumnbasCmtsMacToSidType | read-only | current | Type of device attached to this SID |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BasCmtsByte | BasCmtsUInt8 | current | Range of INTEGER(0..255). |
| BasCmtsHeadEndAuthString | OCTET STRING (SIZE(0..255)) | current | HeadEndMgr Authorization String. |
| BasCmtsHeadEndMacAddr | OCTET STRING (SIZE(0..5)) | current | HeadEndMgr MacAddress. |
| BasCmtsHeadEndMapMode | Integer32 (0 | 99) | current | HeadEndMgr map mode. 0 = Normal, free running maps. 99 = Scripted maps for test and debug. |
| BasCmtsInt16 | Integer32 (-32768..32767) | current | Range of INTEGER(-32768..32767). |
| BasCmtsInt32 | Integer32 | current | Range of Integer32 |
| BasCmtsInt8 | Integer32 (-127..128) | current | Range of INTEGER(-127..128). |
| BasCmtsModulationWsPattern | OCTET STRING (SIZE(0..127)) | current | Bas upstream channel burst descriptor unique word pattern. |
| BasCmtsRowAction | INTEGER { basCmtsRowActionNone(1), basCmtsRowActionApply(2) } | current | Defines Bas Cmts row action. |
| BasCmtsUInt16 | Integer32 (0..'ffff'h) | current | Range of INTEGER(0..0x7fff). |
| BasCmtsUInt32 | Integer32 (0..'7fffffff'h) | current | Range of INTEGER(0..0x7fffffff). |
| BasCmtsUInt8 | Integer32 (0..255) | current | Range of INTEGER(0..255). |
| BasCmtsUpChannelPreamblePattern | OCTET STRING (SIZE(0..127)) | current | Bas Upstream Channel Preamble Pattern. |
| TenthdBmV | Integer32 | current | This data type represents power levels that are normally expressed in dBmV. Units are in tenths of a dBmV; for example, 5.1 dBmV will be represented as 51. |