BGP4-OPT-PARAMETERS-MIB
15 objects
The extension of the MIB module for BGP-4 for optional parameters.
Imported Objects
| BGP-MIB MISSING | bgpPeerRemoteAddr |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | AutonomousType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.15.9 | Identitybgp4OptParametersMIB | The extension of the MIB module for BGP-4 for optional parameters. | ||
| 1.3.6.1.2.1.15.9.1 | TablebgpAuthenticationTable | not-accessible | current | The BGP-4 Authentication Table contains information about BGP Authentication Options on a per-peer basis. |
| 1.3.6.1.2.1.15.9.1.1 | RowbgpAuthenticationPeerEntry | not-accessible | current | Information about Authentication on a per-peer basis. |
| 1.3.6.1.2.1.15.9.1.1.2 | ColumnbgpAuthenticationEntry | not-accessible | current | Information about BGP-4 Authentication. |
| 1.3.6.1.2.1.15.9.1.1.2.1 | ScalarbgpAuthenticationDirection | not-accessible | current | This variable indicates whether authentication information is either being sent by the BGP speaker or has been been received by the BGP speaker. It also serves… |
| 1.3.6.1.2.1.15.9.1.1.2.2 | ScalarbgpAuthenticationCode | read-write | current | This is the AuthenticationCode used. This value is set to -1 if Authentication is not present. |
| 1.3.6.1.2.1.15.9.1.1.2.3 | ScalarbgpAuthenticationDataLength | read-write | current | This value is derived from the optional parameter length minus one (the size of bgpAuthenticationCode). This value may be no larger than 252 due to overhead. T… |
| 1.3.6.1.2.1.15.9.1.1.2.4 | ScalarbgpAuthenticationDataContents | read-write | current | This is the Authentication payload. The semantics of this variable are interpreted according to the authentication code. |
| 1.3.6.1.2.1.15.9.2 | ScalarbgpCapabilitySupportAvailable | read-write | current | This variable determines whether BGP-4 capabilities are supported in this implementation. This variable may be set to false to disable capability support. |
| 1.3.6.1.2.1.15.9.3 | ScalarbgpSupportedCapabilities | read-only | current | Vector of BGP-4 capabilities that are supported in this implementation. Capabilities are identified via the string of bits within this object. The first octet … |
| 1.3.6.1.2.1.15.9.4 | TablebgpPeerCapabilitiesTable | not-accessible | current | This table contains contains the capabilities that are supported for a given peer. |
| 1.3.6.1.2.1.15.9.4.2 | RowbgpPeerCapabilitiesEntry | not-accessible | current | These entries are keyed by a BGP-4 peer's remote address and port combination over which the peering session has been established. |
| 1.3.6.1.2.1.15.9.4.2.1 | ColumnbgpPeerCapabilitiesAnnounced | read-only | current | This bit vector identifies which capabilities have been announced to a BGP-4 speaker. Capabilities are identified via the string of bits within this object. Th… |
| 1.3.6.1.2.1.15.9.4.2.2 | ColumnbgpPeerCapabilitiesReceived | read-only | current | This bit vector identifies which capabilities have been announced by the remote BGP-4 speaker. Capabilities are identified via the string of bits within this o… |
| 1.3.6.1.2.1.15.9.5 | ScalarbgpProtocolExtensions | read-only | current | Registration point for MIB Modules for BGP Protocol Extensions. The Capabilities Advertisement RFC delineates IANA registered capability code numbers, 0-127 an… |