BMA-MIB
136 objects
Copyright (C) The Internet Society (2005). The initial version of this MIB module was published in RFC XXXX; for full legal notices see the RFC itself. Supplementary information may be available on http://www.ietf.org/copyrights/ianamib.html. This module contains managed object definitions for the Baseboard Management Agent instrumentation for an InfiniBand Baseboard Management Agent (BMA).
Imported Objects
| IB-TC-MIB | IbDataPort infinibandMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.3.117.5 | IdentityibBmaMIB | Copyright (C) The Internet Society (2005). The initial version of this MIB module was published in RFC XXXX; for full legal notices see the RFC itself. Supplem… | ||
| 1.3.6.1.3.117.5.1 | NodeibBmaObjects | |||
| 1.3.6.1.3.117.5.1.1 | NodeibBmaBmuInfo | |||
| 1.3.6.1.3.117.5.1.1.1 | ScalaribBmaBaseboardManagedUnitType | read-only | current | The Baseboard Managed Unit (BMU) that contains the BMA is one of three basic types. If the BMU contains an interface to the InfiniBand Management Link (IB-ML) … |
| 1.3.6.1.3.117.5.1.1.2 | ScalaribBmaIsIBMLSupported | read-only | current | Flag that indicates whether direct access to IB-ML is supported. |
| 1.3.6.1.3.117.5.1.1.3 | ScalaribBmaIBMLImplementation | read-only | current | Indicates whether the IB-ML is a physical or virtual implementation. This object is only meaningful if ibBmaIsIBMLSupported has a value of true(1). If the IB-M… |
| 1.3.6.1.3.117.5.1.2 | NodeibBmaBKeyInfo | |||
| 1.3.6.1.3.117.5.1.2.1 | ScalaribBmaIsBKeyNVRAM | read-only | current | Flag that indicates whether the Baseboard Management key (B_Key) is being stored in NVRAM. |
| 1.3.6.1.3.117.5.1.2.2 | ScalaribBmaBKeyValue | read-only | current | The eight-byte Baseboard Management key that is used in all BM MADs sent and received by all valid Baseboard Managers. If the value is all zeroes, B_Key checki… |
| 1.3.6.1.3.117.5.1.2.3 | ScalaribBmaBKeyProtectBit | read-only | current | Flag that controls B_Key prototection levels at the BMA. If the ibBmaBKeyValue is zero, no protection is provided for any ibBmaBKeyProtectBit value. If this va… |
| 1.3.6.1.3.117.5.1.2.4 | ScalaribBmaBKeyLeasePeriod | read-only | current | Specifies the timer value of the B_Key lease period (in seconds). The lease period indicates how long the B_Key Protection bit is to remain non-zero after a BM… |
| 1.3.6.1.3.117.5.1.2.5 | ScalaribBmaBKeyViolations | read-only | current | Counts the number of MAD packets that have been received at this node since power-on or reset that have been dropped due to a failed B_Key check. Note, if this… |
| 1.3.6.1.3.117.5.1.3 | NodeibBmaVpd | |||
| 1.3.6.1.3.117.5.1.3.1 | NodeibBmaModuleInfo | |||
| 1.3.6.1.3.117.5.1.3.1.1 | TableibBmaModuleInfoTable | not-accessible | current | This table contains objects that describe the Module class and the number of InfiniBand and IB-ML links exiting the Module. Non-Modules can also utilize this i… |
| 1.3.6.1.3.117.5.1.3.1.1.1 | RowibBmaModuleInfoEntry | not-accessible | current | The column definitions for the Module Info table. |
| 1.3.6.1.3.117.5.1.3.1.1.1.1 | ColumnibBmaModuleInfoIndex | not-accessible | current | Index into the Module Info table. |
| 1.3.6.1.3.117.5.1.3.1.1.1.2 | ColumnibBmaModInfoModGuid | read-only | current | The GUID (EUI-64 ID) assigned to this module. |
| 1.3.6.1.3.117.5.1.3.1.1.1.3 | ColumnibBmaModInfoModType | read-only | current | InfiniBand module type. |
| 1.3.6.1.3.117.5.1.3.1.1.1.4 | ColumnibBmaModInfoModClass | read-only | current | InfiniBand module class. |
| 1.3.6.1.3.117.5.1.3.1.1.1.5 | ColumnibBmaModInfoNodeCount | read-only | current | Number of InfiniBand nodes on this module with unique NodeGUIDs. |
| 1.3.6.1.3.117.5.1.3.1.1.1.6 | ColumnibBmaModInfoLinkCount | read-only | current | Number of InfiniBand links on this module with unique PortGuids (i.e., NodeGUID plus Port Number). |
| 1.3.6.1.3.117.5.1.3.1.1.1.7 | ColumnibBmaModInfoBckplaneLinkCnt | read-only | current | Number of InfiniBand links exiting this module through its backplane connectors. If the module is not an InfiniBand module, this count is the number of InfiniB… |
| 1.3.6.1.3.117.5.1.3.1.1.1.8 | ColumnibBmaModInfoIbmlCount | read-only | current | Number of IB-ML interfaces on this module. |
| 1.3.6.1.3.117.5.1.3.1.1.1.9 | ColumnibBmaModInfoBckPlaneIbmlCnt | read-only | current | Number of IB-MLs exiting this module through its backplane connectors. If the module is not an InfiniBand module, this count is the number of IB-MLs that exit … |
| 1.3.6.1.3.117.5.1.3.1.1.1.10 | ColumnibBmaModInfoModuleSize | read-only | current | Eight-byte bit map for the volumetric information for standard form factors (in millimeters). |
| 1.3.6.1.3.117.5.1.3.1.1.1.11 | ColumnibBmaModInfoFormFactor | read-only | current | The Module Form Factor. |
| 1.3.6.1.3.117.5.1.3.2 | NodeibBmaChassisInfo | |||
| 1.3.6.1.3.117.5.1.3.2.1 | ScalaribBmaChasInfoChassisGuid | read-only | current | The GUID assigned to this chassis. |
| 1.3.6.1.3.117.5.1.3.2.2 | ScalaribBmaChasInfoSlotCount | read-only | current | Total number of InfiniBand module slots in this chassis. |
| 1.3.6.1.3.117.5.1.3.2.3 | TableibBmaChasInfoSlotTable | not-accessible | current | This table contains objects that describe the Chassis and slot-specific information for Chassis VPD accessed from an InfiniBand Module or a CME. |
| 1.3.6.1.3.117.5.1.3.2.3.1 | RowibBmaChasInfoSlotEntry | not-accessible | current | The column definitions for the Chassis Info table. |
| 1.3.6.1.3.117.5.1.3.2.3.1.1 | ColumnibBmaChasInfoSlotIndex | not-accessible | current | Chassis slot index. |
| 1.3.6.1.3.117.5.1.3.2.3.1.2 | ColumnibBmaChasInfoAssignedSlotNum | read-only | current | Slot number assigned to the CME and the Chassis containing the CME. If the slot number is unspecified or occupied by a non-Module, the value returned will be 0… |
| 1.3.6.1.3.117.5.1.3.2.3.1.3 | ColumnibBmaChasInfoSlotConnStatus | read-only | current | Chassis slot connector status. |
| 1.3.6.1.3.117.5.1.3.2.3.1.4 | ColumnibBmaChasInfoCmeAccess | read-only | current | Chassis CME access. |
| 1.3.6.1.3.117.5.1.3.2.3.1.5 | ColumnibBmaChasInfoProxyAccess | read-only | current | Chassis proxy access. |
| 1.3.6.1.3.117.5.1.3.2.3.1.6 | ColumnibBmaChasInfoLockDrivesCtr | read-only | current | Indicates whether the lock (if present) keeps CME_CTR deasserted until the lock is released. The value lockDrivesCmeCtr(2) is used if the CME uses only the sta… |
| 1.3.6.1.3.117.5.1.3.2.3.1.7 | ColumnibBmaChasInfoMechLockPresent | read-only | current | Indicates whether there is a mechnical lock associated with this slot. A mechnical lock physically prevents the removal of the Module from the slot. The implem… |
| 1.3.6.1.3.117.5.1.3.3 | NodeibBmaFruInfo | |||
| 1.3.6.1.3.117.5.1.3.3.1 | TableibBmaFruInfoTable | not-accessible | current | This table contains objects that describe the FRU records present in the managed device. |
| 1.3.6.1.3.117.5.1.3.3.1.1 | RowibBmaFruInfoEntry | not-accessible | current | The column definitions for the FRU Info table. |
| 1.3.6.1.3.117.5.1.3.3.1.1.1 | ColumnibBmaFruInfoIndex | not-accessible | current | FRU Info index. |
| 1.3.6.1.3.117.5.1.3.3.1.1.2 | ColumnibBmaFruInfoType | read-only | current | The Field Replaceable Unit (FRU) type. |
| 1.3.6.1.3.117.5.1.3.3.1.1.3 | ColumnibBmaFruInfoGuidType | read-only | current | The FRU GUID type. |
| 1.3.6.1.3.117.5.1.3.3.1.1.4 | ColumnibBmaFruInfoGuidValue | read-only | current | The GUID assigned to this FRU. Needs to hold the longest possible GUID type (guid16(4)). |
| 1.3.6.1.3.117.5.1.3.3.1.1.5 | ColumnibBmaFruInfoSerialNumber | read-only | current | The FRU serial number. |
| 1.3.6.1.3.117.5.1.3.3.1.1.6 | ColumnibBmaFruInfoPartNumber | read-only | current | The FRU Part Number. |
| 1.3.6.1.3.117.5.1.3.3.1.1.7 | ColumnibBmaFruInfoModelName | read-only | current | The model name is assigned by the FRU manufacturer. |
| 1.3.6.1.3.117.5.1.3.3.1.1.8 | ColumnibBmaFruInfoVersion | read-only | current | The FRU version is assigned by the FRU manufacturer. |
| 1.3.6.1.3.117.5.1.3.3.1.1.9 | ColumnibBmaFruInfoManufacturerName | read-only | current | The FRU Manufacturer Name. |
| 1.3.6.1.3.117.5.1.3.3.1.1.10 | ColumnibBmaFruInfoProductName | read-only | current | The FRU Product name. |
| 1.3.6.1.3.117.5.1.3.3.1.1.11 | ColumnibBmaFruInfoManufacturerID | read-only | current | The FRU Manufacturer ID. |
| 1.3.6.1.3.117.5.1.3.3.1.1.12 | ColumnibBmaFruInfoManDateAndTime | read-only | current | Manufacture date and time. |
| 1.3.6.1.3.117.5.1.3.4 | NodeibBmaPortConnectInfo | |||
| 1.3.6.1.3.117.5.1.3.4.1 | ScalaribBmaPortConNumConnection | read-only | current | Number of port connections. |
| 1.3.6.1.3.117.5.1.3.4.2 | TableibBmaPortConnectTable | not-accessible | current | This table contains objects that describe the Port Connections present in the managed device. |
| 1.3.6.1.3.117.5.1.3.4.2.1 | RowibBmaPortConnectEntry | not-accessible | current | The column definitions for the Port Connection table. |
| 1.3.6.1.3.117.5.1.3.4.2.1.1 | ColumnibBmaPortConnectIndex | not-accessible | current | Index for the Port Connection table. |
| 1.3.6.1.3.117.5.1.3.4.2.1.2 | ColumnibBmaPortConInternalCon | read-only | current | Internal connection type. |
| 1.3.6.1.3.117.5.1.3.4.2.1.3 | ColumnibBmaPortConMediaClass | read-only | current | Connection Media Class. |
| 1.3.6.1.3.117.5.1.3.4.2.1.4 | ColumnibBmaPortConConClass | read-only | current | Connection Class. |
| 1.3.6.1.3.117.5.1.3.5 | NodeibBmaModPowerInfo | |||
| 1.3.6.1.3.117.5.1.3.5.1 | ScalaribBmaOperThermalPower | read-only | current | Maximum amount of power dissipated under normal operation including any vendor supplied exerciser over any sliding 60 second window expressed in mW. If this va… |
| 1.3.6.1.3.117.5.1.3.5.2 | ScalaribBmaOperCurrent | read-only | current | Maximum amount of current drawn under normal operation including any vendor supplied exerciser across the range of VBulk (expressed in mA). If this value is un… |
| 1.3.6.1.3.117.5.1.3.5.3 | ScalaribBmaIdleCurrent | read-only | current | Amount of current that a fully initialized device draws when waiting for functional requests (in mA). If this value is unspecified, a 0 will be returned. |
| 1.3.6.1.3.117.5.1.3.5.4 | ScalaribBmaInitCurrent | read-only | current | Amount of current drawn during Modules Built-in self test or self-initialization execution across the range of VBulk (in mA). If this value is unspecified, a 0… |
| 1.3.6.1.3.117.5.1.3.5.5 | ScalaribBmaInitTime | read-only | current | Amount of time (in 10's of ms) from the end of Module Reset to the end of BIST and/or module self-initialization complete under non-fault conditions. The modul… |
| 1.3.6.1.3.117.5.1.3.5.6 | ScalaribBmaIsMStandbySupported | read-only | current | Capability flag to indicate if MStandby is supported. |
| 1.3.6.1.3.117.5.1.3.5.7 | ScalaribBmaIsPowerMgmtSupported | read-only | current | Capability flag to indicate if power management is supported. |
| 1.3.6.1.3.117.5.1.3.5.8 | ScalaribBmaIsUSleepSupported | read-only | current | Capability flag to indicate if USleep is supported. |
| 1.3.6.1.3.117.5.1.3.5.9 | ScalaribBmaIsUStandbySupported | read-only | current | Capability flag to indicate if UStandby is supported. |
| 1.3.6.1.3.117.5.1.3.5.10 | ScalaribBmaPowerClass | read-only | current | Power class. |
| 1.3.6.1.3.117.5.1.3.5.11 | ScalaribBmaRedundantPower | read-only | current | Redundant power converter capability. |
| 1.3.6.1.3.117.5.1.3.6 | NodeibBmaPowerMgmtInfo | |||
| 1.3.6.1.3.117.5.1.3.6.1 | ScalaribBmaPowerMgmtIocCount | read-only | current | Number of IOC capabilities. |
| 1.3.6.1.3.117.5.1.3.6.2 | TableibBmaPowerMgmtIocTable | not-accessible | current | This table contains objects that describe the Power Management for each IOC. |
| 1.3.6.1.3.117.5.1.3.6.2.1 | RowibBmaPowerMgmtIocEntry | not-accessible | current | The column definitions for the Power Managment IOC table. |
| 1.3.6.1.3.117.5.1.3.6.2.1.1 | ColumnibBmaPowerMgmtIocIndex | not-accessible | current | Index for the Power Management IOC table. |
| 1.3.6.1.3.117.5.1.3.6.2.1.2 | ColumnibBmaPMIsIDozeSupported | read-only | current | Flag for Is I Doze supported. |
| 1.3.6.1.3.117.5.1.3.6.2.1.3 | ColumnibBmaPMIsINapSupported | read-only | current | Flag for Is I Nap supported. |
| 1.3.6.1.3.117.5.1.3.6.2.1.4 | ColumnibBmaPMIsISleepSupported | read-only | current | Flag for Is I Sleep supported. |
| 1.3.6.1.3.117.5.1.3.6.2.1.5 | ColumnibBmaPMIsIStandbySupported | read-only | current | Flag for Is I Standby supported. |
| 1.3.6.1.3.117.5.1.3.6.2.1.6 | ColumnibBmaPMWREIsIDozeSupported | read-only | current | Flag for Is WRE I Doze supported. |
| 1.3.6.1.3.117.5.1.3.6.2.1.7 | ColumnibBmaPMWREIsINapSupported | read-only | current | Flag for Is WRE I Nap supported. |
| 1.3.6.1.3.117.5.1.3.6.2.1.8 | ColumnibBmaPMWREIsISleepSupported | read-only | current | Flag for Is WRE I Sleep supported. |
| 1.3.6.1.3.117.5.1.3.6.2.1.9 | ColumnibBmaPMWREIsIStandbySupported | read-only | current | Flag for Is WRE I Standby supported. |
| 1.3.6.1.3.117.5.1.3.6.2.1.10 | ColumnibBmaPwrMgtIDozeCurrent | read-only | current | The amount of total current drawn from the Bulk Power while in I-Doze PM state. The range is from 0 to 16,384 milliAmps. |
| 1.3.6.1.3.117.5.1.3.6.2.1.11 | ColumnibBmaPwrMgtINapCurrent | read-only | current | The amount of total current drawn from the Bulk Power while in I-Nap PM state. The range is from 0 to 16,384 milliAmps. |
| 1.3.6.1.3.117.5.1.3.6.2.1.12 | ColumnibBmaPwrMgtISleepCurrent | read-only | current | The amount of total current drawn from the Bulk Power while in I-Sleep PM state. The range is from 0 to 16,384 milliAmps. |
| 1.3.6.1.3.117.5.1.3.6.2.1.13 | ColumnibBmaPwrMgtIStandbyCurrent | read-only | current | The amount of total current drawn from the Auxilliary Power while in I-Standby PM state. The Bulk Power drawn is defined to be 0 amps. The range is from 0 to 1… |
| 1.3.6.1.3.117.5.1.3.7 | NodeibBmaCmeInfo | |||
| 1.3.6.1.3.117.5.1.3.7.1 | ScalaribBmaCmeGuidType | read-only | current | The CME GUID type. |
| 1.3.6.1.3.117.5.1.3.7.2 | ScalaribBmaCmeGuidValue | read-only | current | The GUID assigned to this CME. Needs to hold the longest possible GUID type (guid16(4)). |
| 1.3.6.1.3.117.5.1.3.7.3 | ScalaribBmaCmeFirmMinorRev | read-only | current | The minor revision of the CME firmware. |
| 1.3.6.1.3.117.5.1.3.7.4 | ScalaribBmaCmeFirmMajorRev | read-only | current | The major revision of the CME firmware. |
| 1.3.6.1.3.117.5.1.3.7.5 | ScalaribBmaCmeSlotNumbers | read-only | current | A 256 bit mask representing IB ports for which the CME provides IB-ML access. The mask allows slot numbers to be non-sequential. Slot numbers must be in the ra… |
| 1.3.6.1.3.117.5.1.3.8 | NodeibBmaOemInfo | |||
| 1.3.6.1.3.117.5.1.3.8.1 | TableibBmaOemTable | not-accessible | current | This table contains objects that describe the OEM entries. |
| 1.3.6.1.3.117.5.1.3.8.1.1 | RowibBmaOemEntry | not-accessible | current | The column definitions for the OEM table. |
| 1.3.6.1.3.117.5.1.3.8.1.1.1 | ColumnibBmaOemIndex | not-accessible | current | Index for the OEM table. |
| 1.3.6.1.3.117.5.1.3.8.1.1.2 | ColumnibBmaOemIdType | read-only | current | The OEM ID type. |
| 1.3.6.1.3.117.5.1.3.8.1.1.3 | ColumnibBmaOemIdValue | read-only | current | The OEM ID value. |
| 1.3.6.1.3.117.5.1.3.8.1.1.4 | ColumnibBmaOemDataLength | read-only | current | The OEM Data field length. |
| 1.3.6.1.3.117.5.1.3.8.1.1.5 | ColumnibBmaOemDataBuf | read-only | current | The OEM Data buffer. |
| 1.3.6.1.3.117.5.1.3.9 | NodeibBmaBuddyInfo | |||
| 1.3.6.1.3.117.5.1.3.9.1 | ScalaribBmaBuddyCount | read-only | current | The Buddy count. This is the number of InfiniBand nodes, excluding this node, that belong to the same enclosure as the node reporting this record. If no other … |
| 1.3.6.1.3.117.5.1.3.9.2 | TableibBmaBuddyTable | not-accessible | current | A table containing BMA Buddy Record information. |
| 1.3.6.1.3.117.5.1.3.9.2.1 | RowibBmaBuddyEntry | not-accessible | current | A conceptual row of the ibBmaBuddyTable containing information about a particular Buddy table entry. |
| 1.3.6.1.3.117.5.1.3.9.2.1.1 | ColumnibBmaBuddyIndex | not-accessible | current | Index that identifies this Buddy table entry. |
| 1.3.6.1.3.117.5.1.3.9.2.1.2 | ColumnibBmaBuddyGuidType | read-only | current | The Buddy node GUID type. |
| 1.3.6.1.3.117.5.1.3.9.2.1.3 | ColumnibBmaBuddyGuidValue | read-only | current | The GUID assigned to this node. Needs to hold the longest possible GUID type (guid16(4)). |
| 1.3.6.1.3.117.5.1.3.10 | NodeibBmaAssetTagInfo | |||
| 1.3.6.1.3.117.5.1.3.10.1 | TableibBmaAssetTagTable | not-accessible | current | A table containing BMA Asset Tag information. |
| 1.3.6.1.3.117.5.1.3.10.1.1 | RowibBmaAssetTagEntry | not-accessible | current | A conceptual row of the ibBmaAssetTagTable containing information about a particular Asset Tag entry. |
| 1.3.6.1.3.117.5.1.3.10.1.1.1 | ColumnibBmaAssetTagIndex | not-accessible | current | Index that identifies this Asset Tag table entry. |
| 1.3.6.1.3.117.5.1.3.10.1.1.2 | ColumnibBmaAssetTagFruHandle | read-only | current | The FRU handle. |
| 1.3.6.1.3.117.5.1.3.10.1.1.3 | ColumnibBmaAssetTagLength | read-only | current | The length of the ibBmaAssetTagValue object. |
| 1.3.6.1.3.117.5.1.3.10.1.1.4 | ColumnibBmaAssetTagValue | read-only | current | The Asset Tag. |
| 1.3.6.1.3.117.5.2 | NodeibBmaConformance | |||
| 1.3.6.1.3.117.5.2.1 | NodeibBmaCompliances | |||
| 1.3.6.1.3.117.5.2.1.1 | ComplianceibBmaBasicNodeCompliance | current | The basic node implementation requirements for agents that support the IPOIB BMA MIB. | |
| 1.3.6.1.3.117.5.2.1.2 | ComplianceibBmaFullNodeCompliance | current | The full node implementation requirements for agents that support the IPOIB BMA MIB. | |
| 1.3.6.1.3.117.5.2.2 | NodeibBmaGroups | |||
| 1.3.6.1.3.117.5.2.2.1 | GroupibBmaBmuInfoGroup | current | The ibBmaBmuInfoGroup defines the MIB objects that describe information about the Baseboard Management Unit (BMU). | |
| 1.3.6.1.3.117.5.2.2.2 | GroupibBmaBKeyInfoGroup | current | The ibBmaBKeyInfo Group defines the MIB objects that describe information about the Baseboard Management keys (B_Keys). | |
| 1.3.6.1.3.117.5.2.2.3 | GroupibBmaModuleInfoGroup | current | The ibBmaModuleInfo Group defines the MIB objects that describe information about the module. | |
| 1.3.6.1.3.117.5.2.2.4 | GroupibBmaChassisInfoGroup | current | The ibBmaChassisInfo Group defines the MIB objects that describe information about a managed chassis. | |
| 1.3.6.1.3.117.5.2.2.5 | GroupibBmaFruInfoGroup | current | The ibBmaFruInfo Group defines the MIB objects that describe information about the Fru attributes. | |
| 1.3.6.1.3.117.5.2.2.6 | GroupibBmaPortConnectInfoGroup | current | The ibBmaPortConnectInfo Group defines the MIB objects that describe information about the port connections. | |
| 1.3.6.1.3.117.5.2.2.7 | GroupibBmaModPowerInfoGroup | current | The ibBmaModPowerInfo Group defines the MIB objects that describe information about the power attributes of the module. | |
| 1.3.6.1.3.117.5.2.2.8 | GroupibBmaPowerMgmtInfoGroup | current | The ibBmaPowerMgmtInfo Group defines the MIB objects that describe information about power management. | |
| 1.3.6.1.3.117.5.2.2.9 | GroupibBmaCmeInfoGroup | current | The ibBmaCmeInfo Group defines the MIB objects that describe information about the CME. | |
| 1.3.6.1.3.117.5.2.2.10 | GroupibBmaOemInfoGroup | current | The ibBmaOemInfo Group defines the MIB objects that describe information about OEM data. | |
| 1.3.6.1.3.117.5.2.2.11 | GroupibBmaBuddyInfoGroup | current | The ibBmaBuddyInfo Group defines the MIB objects that describe information about the Buddy Info. | |
| 1.3.6.1.3.117.5.2.2.12 | GroupibBmaAssetTagInfoGroup | current | The ibBmaAssetTagInfo Group defines the MIB objects that describe information about the asset tags. |