BORDERWARE-MIB
60 objects
The private Borderware SNMP extensions.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Opaque |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8673 | Identityborderware | The private Borderware SNMP extensions. | ||
| 1.3.6.1.4.1.8673.1 | NodebwProducts | |||
| 1.3.6.1.4.1.8673.1.2 | NodebwProductId | |||
| 1.3.6.1.4.1.8673.1.2.1 | NodebwFirewallServer7 | |||
| 1.3.6.1.4.1.8673.4 | NodebwSysMemory | |||
| 1.3.6.1.4.1.8673.4.1 | ScalarmemIndex | read-only | current | Bogus Index. This should always return the integer 0. |
| 1.3.6.1.4.1.8673.4.2 | ScalarmemErrorName | read-only | current | Bogus Name. This should always return the string 'swap'. |
| 1.3.6.1.4.1.8673.4.3 | ScalarmemTotalSwap | read-only | current | Total Swap Size configured for the host. |
| 1.3.6.1.4.1.8673.4.4 | ScalarmemAvailSwap | read-only | current | Available Swap Space on the host. |
| 1.3.6.1.4.1.8673.4.5 | ScalarmemTotalReal | read-only | current | Total Real/Physical Memory Size on the host. |
| 1.3.6.1.4.1.8673.4.6 | ScalarmemAvailReal | read-only | current | Available Real/Physical Memory Space on the host. |
| 1.3.6.1.4.1.8673.4.7 | ScalarmemTotalSwapTXT | read-only | current | Total virtual memory used by text. |
| 1.3.6.1.4.1.8673.4.8 | ScalarmemAvailSwapTXT | read-only | current | Active virtual memory used by text. |
| 1.3.6.1.4.1.8673.4.9 | ScalarmemTotalRealTXT | read-only | current | Total Real/Physical Memory Size used by text. |
| 1.3.6.1.4.1.8673.4.10 | ScalarmemAvailRealTXT | read-only | current | Active Real/Physical Memory Space used by text. |
| 1.3.6.1.4.1.8673.4.11 | ScalarmemTotalFree | read-only | current | Total Available Memory on the host |
| 1.3.6.1.4.1.8673.4.12 | ScalarmemMinimumSwap | read-only | current | Minimum amount of free swap required to be free or else memErrorSwap is set to 1 and an error string is returned memSwapErrorMsg. |
| 1.3.6.1.4.1.8673.4.13 | ScalarmemShared | read-only | current | Total Shared Memory |
| 1.3.6.1.4.1.8673.4.14 | ScalarmemBuffer | read-only | current | Total Buffered Memory |
| 1.3.6.1.4.1.8673.4.15 | ScalarmemCached | read-only | current | Total Cached Memory |
| 1.3.6.1.4.1.8673.4.100 | ScalarmemSwapError | read-only | current | Error flag. 1 indicates very little swap space left |
| 1.3.6.1.4.1.8673.4.101 | ScalarmemSwapErrorMsg | read-only | current | Error message describing the Error Flag condition |
| 1.3.6.1.4.1.8673.9 | TabledskTable | not-accessible | current | Disk watching information. Partions to be watched are configured by the snmpd.conf file of the agent. |
| 1.3.6.1.4.1.8673.9.1 | RowdskEntry | not-accessible | current | An entry containing a disk and its statistics. |
| 1.3.6.1.4.1.8673.9.1.1 | ColumndskIndex | read-only | current | Integer reference number (row number) for the disk mib. |
| 1.3.6.1.4.1.8673.9.1.2 | ColumndskPath | read-only | current | Path where the disk is mounted. |
| 1.3.6.1.4.1.8673.9.1.3 | ColumndskDevice | read-only | current | Path of the device for the partition |
| 1.3.6.1.4.1.8673.9.1.4 | ColumndskMinimum | read-only | current | Minimum space required on the disk (in kBytes) before the errors are triggered. Either this or dskMinPercent is configured via the agent's snmpd.conf file. |
| 1.3.6.1.4.1.8673.9.1.5 | ColumndskMinPercent | read-only | current | Percentage of minimum space required on the disk before the errors are triggered. Either this or dskMinimum is configured via the agent's snmpd.conf file. |
| 1.3.6.1.4.1.8673.9.1.6 | ColumndskTotal | read-only | current | Total size of the disk/partion (kBytes) |
| 1.3.6.1.4.1.8673.9.1.7 | ColumndskAvail | read-only | current | Available space on the disk |
| 1.3.6.1.4.1.8673.9.1.8 | ColumndskUsed | read-only | current | Used space on the disk |
| 1.3.6.1.4.1.8673.9.1.9 | ColumndskPercent | read-only | current | Percentage of space used on disk |
| 1.3.6.1.4.1.8673.9.1.10 | ColumndskPercentNode | read-only | current | Percentage of inodes used on disk |
| 1.3.6.1.4.1.8673.9.1.100 | ColumndskErrorFlag | read-only | current | Error flag signaling that the disk or partition is under the minimum required space configured for it. |
| 1.3.6.1.4.1.8673.9.1.101 | ColumndskErrorMsg | read-only | current | A text description providing a warning and the space left on the disk. |
| 1.3.6.1.4.1.8673.11 | NodesystemStats | |||
| 1.3.6.1.4.1.8673.11.1 | ScalarssIndex | read-only | current | Reference Index for each observed systemStat (1). |
| 1.3.6.1.4.1.8673.11.2 | ScalarssErrorName | read-only | current | The list of systemStats names (vmstat) we're Counting. |
| 1.3.6.1.4.1.8673.11.3 | ScalarssSwapIn | read-only | current | Amount of memory swapped in from disk (kB/s). |
| 1.3.6.1.4.1.8673.11.4 | ScalarssSwapOut | read-only | current | Amount of memory swapped to disk (kB/s). |
| 1.3.6.1.4.1.8673.11.5 | ScalarssIOSent | read-only | deprecated | Blocks sent to a block device (blocks/s). Deprecated, replaced by the ssIORawSent object |
| 1.3.6.1.4.1.8673.11.6 | ScalarssIOReceive | read-only | deprecated | Blocks received from a block device (blocks/s). Deprecated, replaced by the ssIORawReceived object |
| 1.3.6.1.4.1.8673.11.7 | ScalarssSysInterrupts | read-only | deprecated | The number of interrupts per second, including the clock. Deprecated, replaced by ssRawInterrupts |
| 1.3.6.1.4.1.8673.11.8 | ScalarssSysContext | read-only | deprecated | The number of context switches per second. Deprecated, replaced by ssRawContext |
| 1.3.6.1.4.1.8673.11.9 | ScalarssCpuUser | read-only | deprecated | percentages of user CPU time. Deprecated, replaced by the ssCpuRawUser object |
| 1.3.6.1.4.1.8673.11.10 | ScalarssCpuSystem | read-only | deprecated | percentages of system CPU time. Deprecated, replaced by of the ssCpuRawSystem object |
| 1.3.6.1.4.1.8673.11.11 | ScalarssCpuIdle | read-only | deprecated | percentages of idle CPU time. Deprecated, replaced by of the ssCpuRawIdle object |
| 1.3.6.1.4.1.8673.11.50 | ScalarssCpuRawUser | read-only | current | user CPU time. |
| 1.3.6.1.4.1.8673.11.51 | ScalarssCpuRawNice | read-only | current | nice CPU time. |
| 1.3.6.1.4.1.8673.11.52 | ScalarssCpuRawSystem | read-only | current | system CPU time. |
| 1.3.6.1.4.1.8673.11.53 | ScalarssCpuRawIdle | read-only | current | idle CPU time. |
| 1.3.6.1.4.1.8673.11.54 | ScalarssCpuRawWait | read-only | current | iowait CPU time. This is primarily a SysV thingie |
| 1.3.6.1.4.1.8673.11.55 | ScalarssCpuRawKernel | read-only | current | kernel CPU time. |
| 1.3.6.1.4.1.8673.11.56 | ScalarssCpuRawInterrupt | read-only | current | interruptlevel CPU time. This is primarily a BSD thingie |
| 1.3.6.1.4.1.8673.11.57 | ScalarssIORawSent | read-only | current | Number of requests sent to a block device |
| 1.3.6.1.4.1.8673.11.58 | ScalarssIORawReceived | read-only | current | Number of interrupts processed |
| 1.3.6.1.4.1.8673.11.59 | ScalarssRawInterrupts | read-only | current | Number of requests received from a block device |
| 1.3.6.1.4.1.8673.11.60 | ScalarssRawContexts | read-only | current | Number of context switches |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Float | Opaque (SIZE (7)) | current | A single precision floating-point number. The semantics and encoding are identical for type 'single' defined in IEEE Standard for Binary Floating-Point, ANSI/IEEE Std 754-1985. The value is restricted to the BER seriali… |