BSTD-OPT-MIB
62 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1 | Nodecdx6500PCTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.14 | Tablecdx6500PPCTBSTDPortTable | not-accessible | mandatory | A table of BSTD Port configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1 | Rowcdx6500PPCTBSTDPortEntry | not-accessible | mandatory | A BSTD Configuration Table entry. Each entry contains the configuration parameters for a single BSTD port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.1 | Columncdx6500BSTDCfgPortNumber | read-only | mandatory | The BSTD port number described by this entry. |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.2 | Columncdx6500BSTDCfgPADType | read-only | mandatory | Indicates whether the port is functioning as a Terminal PAD (tpad) or a Host PAD (hpad). newvalTpad - same functionality as 'tpad', new enumeration introduced … |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.3 | Columncdx6500BSTDCfgLineInterface | read-only | mandatory | Selects the line interface to use. sync - synchronous operation. async - asynchronous operation. newvalSync - same functionality as 'sync', new enumeration int… |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.4 | Columncdx6500BSTDCfgClockSource | read-only | mandatory | int - internal clock source ext - external clock source. newvalInt - same functionality as 'int', new enumeration introduced for RFC1155 compatibility. |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.5 | Columncdx6500BSTDCfgClockSpeed | read-only | mandatory | This is the speed of the port in bits per second, when using internal clocking. |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.6 | Columncdx6500BSTDCfgSyncContention | read-only | mandatory | Indicates whether Half Duplex (hdx) or Full Duplex (fdx) modem signals are being generated. Full Duplex indicates communication is occuring in both directions … |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.7 | Columncdx6500BSTDCfgAsyncConnType | read-only | mandatory | Specify the control signal handshake required for a connection to be made to this port: simp - simple, no control signals required simpa - CTS follows RTS, but… |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.8 | Columncdx6500BSTDCfgNumDevices | read-only | mandatory | Specifies the number of physical devices on this line. |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.9 | Columncdx6500BSTDCfgServTimer | read-only | mandatory | The Service Timer specifies the interval of time in seconds between periodic servicing. Such servicing includes intervals between the time the PAD will attempt… |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.10 | Columncdx6500BSTDCfgErrThreshCount | read-only | mandatory | Indicates number of consecutive errors that can occur before a device is considered down. |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.11 | Columncdx6500BSTDCfgResponseTimeout | read-only | mandatory | Specifies the amount of time in msec the PAD allows a terminal, printer or host to respond. As a result, the TPAD may re-transmit the previous message or abort… |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.12 | Columncdx6500BSTDCfgPadProtTimeout | read-only | mandatory | Specifies the maximum amount of time in seconds the PAD will wait for the end of a multi-packet message from the network. If this time limit is exceeded, the P… |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.13 | Columncdx6500BSTDCfgTranNumbers | read-only | mandatory | This parameter is used to select the BSTD Transmission Numbering's mode of operation. disable - Disable Transmission Numbering modulo2 - Alternating '0' and '1… |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.14 | Columncdx6500BSTDCfgContentionMode | read-only | mandatory | For a TPAD port only : This parameter enables or disables a TPAD port to use BSTD Contention Mode. Note that an HPAD must have this option set to Enable. disab… |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.15 | Columncdx6500BSTDCfgPortSubAddr | read-only | mandatory | 0 - 3 Decimal digits Calls addressed to this node and with this subaddress will be routed to this port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.16 | Columncdx6500BSTDCfgPortOptions | read-only | deprecated | This object has been deprecated, It is replaced by cdx6500BSTDPortOptString. |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.17 | Columncdx6500BSTDCfgRestrictConnDest | read-only | mandatory | 0 - 3 Decimal digits or a single blank All calls originating from this port will be routed to the destination specified in this parameter, irrespective of rout… |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.18 | Columncdx6500BSTDCfgBillRec | read-only | mandatory | This controls whether billing (accounting) records will be created for calls on this Device. newvalOff - same functionality as 'off', new enumeration introduce… |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.19 | Columncdx6500BSTDPortOptString | read-only | mandatory | This is the new object for cdx6500BSTDPortOption. Select options on this BSTD port as follows: NONE - no option specified ORG - Controllers on this port will o… |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.20 | Columncdx6500BSTDCfgElectricalInterfaceType | read-only | mandatory | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 -… |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.21 | Columncdx6500BSTDCfgV24ElectricalInterfaceOption | read-only | mandatory | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| 1.3.6.1.4.1.449.2.1.2.1.1.14.1.22 | Columncdx6500BSTDCfgHighSpeedElectricalInterfaceOption | read-only | mandatory | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| 1.3.6.1.4.1.449.2.1.2.1.8 | Nodecdx6500PCTBSTDDeviceGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.8.1 | Tablecdx6500PBCTBSTDDeviceTable | not-accessible | mandatory | A table of BSTD device configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.8.1.1 | Rowcdx6500PBCTBSTDDeviceEntry | not-accessible | mandatory | A BSTD Configuration Table entry. Each entry contains the configuration parameters for a single BSTD device. |
| 1.3.6.1.4.1.449.2.1.2.1.8.1.1.1 | Columncdx6500BSTDDevPortNumber | read-only | mandatory | The BSTD port accessing this device |
| 1.3.6.1.4.1.449.2.1.2.1.8.1.1.2 | Columncdx6500BSTDDevEntry | read-only | mandatory | The unique number for this specific port. |
| 1.3.6.1.4.1.449.2.1.2.1.8.1.1.3 | Columncdx6500BSTDStationAddr1 | read-only | mandatory | This is the first byte of this Station's address. The Station address consists of two hexadecimal digits. The valid range for a digit is 20-7F. |
| 1.3.6.1.4.1.449.2.1.2.1.8.1.1.4 | Columncdx6500BSTDStationAddr2 | read-only | mandatory | This is the second byte of this Station's address. The Station address consists of two hexadecimal digits. The valid range for a digit is 20-7F. |
| 1.3.6.1.4.1.449.2.1.2.1.8.1.1.5 | Columncdx6500BSTDDestStationAddr1 | read-only | mandatory | This is the first byte for the Station on the remote PAD. The Destination Station address consists of two hexadecimal digits. The valid range for a digit is 20… |
| 1.3.6.1.4.1.449.2.1.2.1.8.1.1.6 | Columncdx6500BSTDDesstStationAddr2 | read-only | mandatory | This is the first byte for the Station on the remote PAD. The Destination Station address consists of two hexadecimal digits. The valid range for a digit is 20… |
| 1.3.6.1.4.1.449.2.1.2.1.8.1.1.7 | Columncdx6500BSTDGroupAddr1 | read-only | mandatory | This is the first byte of this Station's Group address. The Group address consists of two hexadecimal digits. The valid range for a digit is 20-7F. |
| 1.3.6.1.4.1.449.2.1.2.1.8.1.1.8 | Columncdx6500BSTDGroupAddr2 | read-only | mandatory | This is the second byte of this Station's Group address. The Group address consists of two hexadecimal digits. The valid range for a digit is 20-7F. |
| 1.3.6.1.4.1.449.2.1.2.1.8.1.1.9 | Columncdx6500BSTDCallMnemonic | read-only | mandatory | This mnemonic name is used for originating calls from this Station. |
| 1.3.6.1.4.1.449.2.1.2.1.8.1.1.10 | Columncdx6500BSTDStationEnabled | read-only | mandatory | This parameter is used to enable or disable the operation of this Station. no - Disable Station. yes - Enable Station. newvalNo - same functionality as 'no', n… |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1 | Nodecdx6500PSTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.14 | Tablecdx6500PPSTBSTDPortStatTable | not-accessible | mandatory | A table of BSTD port statistics. |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1 | Rowcdx6500BSTDPortStatEntry | not-accessible | mandatory | A BSTD Port Statistic Table entry. Each entry contains the statistics for a single BSTD port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1.1 | Columncdx6500BSTDStatPortNumber | read-only | mandatory | The BSTD port number described by this entry. |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1.2 | Columncdx6500BSTDPortStatus | read-only | mandatory | Port Status indicates whether or not the port is switched on and is ready for operation. This value may be one of : up - Port is up and running. down - port is… |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1.3 | Columncdx6500BSTDPortState | read-only | mandatory | Port State indicates what the port is actually in the process of doing. This value may be one of : INACTIVE - H/TPAD port inactive entered during boot WTPOLSER… |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1.4 | Columncdx6500BSTDPortSpeed | read-only | mandatory | This is the speed of the port if clock is internal. If clock is external, this is the detected clock speed. If Port Speed is 0, clock is external, but clocking… |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1.5 | Columncdx6500BSTDPortUtilIn | read-only | mandatory | Percentage of Port input bandwidth in use. |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1.6 | Columncdx6500BSTDPortUtilOut | read-only | mandatory | Percentage of Port output bandwidth in use. |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1.7 | Columncdx6500BSTDInMsgs | read-only | mandatory | Number of message received since last node, port, or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1.8 | Columncdx6500BSTDOutMsgs | read-only | mandatory | Number of message sent since last node, port, or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1.9 | Columncdx6500BSTDInChars | read-only | mandatory | Number of characters received since last node, port, or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1.10 | Columncdx6500BSTDOutChars | read-only | mandatory | Number of characters sent since last node, port, or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1.11 | Columncdx6500BSTDCharRateIn | read-only | mandatory | Number of characters received per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1.12 | Columncdx6500BSTDCharRateOut | read-only | mandatory | Number of characters sent per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.14.1.13 | Columncdx6500BSTDCrcBccErrs | read-only | mandatory | Number of CRC errors since last node, port, or statistics reset. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |