BSUWIRELESSIF-MIB
80 objects
This group contains BSU Wireless Interface information. It shows parameters for each configured Wireless Port on the BSU. It displays the following tables: aniBsuWirelessPortTable - with basic wireless port information aniBsuChannelTable - with Channel related information aniBsuQosLinkTable - with QOS Link related information aniBsuPowerControlTable - with Power control related information aniBsuAntennaTable - with Antenna related information aniBsuSectorTable - with Sector related information aniBsuWirelessPtPConfGroup - PacketWave 620 Wireless Configuration group aniBsuWirelessPtpStatusGroup - PacketWave 620 Wireless Status information aniBsuWirelessFreqAdminTable - PacketWave 620/750/1000 FrequencyTable Configuration aniBsuWirelessFreqOperTable - PacketWave 620/750/1000 Current FrequencyTable display aniBsuWirelessSysConfGroup - PacketWave 1000/760 per system Configuration group aniBsuWirelessIfConfTable - PacketWave 1000/760 per port Wireless Configuration table aniBsuWirelessAFSTable - PacketWave 1000/760 per port AFS Configuration table
Imported Objects
| ANIROOT-MIB | bsu |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.3.2 | IdentityaniBsuWirelessIf | This group contains BSU Wireless Interface information. It shows parameters for each configured Wireless Port on the BSU. It displays the following tables: ani… | ||
| 1.3.6.1.4.1.4325.3.2.1 | TableaniBsuWirelessPortTable | not-accessible | current | This table contains entries with basic information about each BSU Wireless Port. |
| 1.3.6.1.4.1.4325.3.2.1.1 | RowaniBsuWirelessPortEntry | not-accessible | current | An entry containing basic information for this particular wireless port. |
| 1.3.6.1.4.1.4325.3.2.1.1.1 | ColumnaniBsuWirelessPort | read-only | current | The wireless port number. |
| 1.3.6.1.4.1.4325.3.2.1.1.2 | ColumnaniBsuPortMacAddr | read-only | current | The MAC Address of the wireless port. This field is not applicable when BSU is running as a bridge. The agent will display a blank string for this case. |
| 1.3.6.1.4.1.4325.3.2.1.1.3 | ColumnaniBsuPortState | read-only | current | The current state of the wireless port. |
| 1.3.6.1.4.1.4325.3.2.1.1.4 | ColumnaniBsuPortReset | read-write | current | This object is used to reset an individual wireless port. Setting this parameter to true(1) causes the port to reset. |
| 1.3.6.1.4.1.4325.3.2.1.1.5 | ColumnaniBsuPortFlag | read-write | current | This flag is used to turn a particular wireless port on or off, that is, to selectively enable(1) or disable(2) a port. It is valid only for configured ports. … |
| 1.3.6.1.4.1.4325.3.2.4 | TableaniBsuChannelTable | not-accessible | current | This table contains Channel related information for each BSU Wireless interface. |
| 1.3.6.1.4.1.4325.3.2.4.1 | RowaniBsuChannelEntry | not-accessible | current | An entry containing Channel attributes for this particular interface. |
| 1.3.6.1.4.1.4325.3.2.4.1.2 | ColumnaniBsuChannelFrequency | read-only | current | The Current Channel Center Frequency in MHz. If no radio is detected, this object will display a value of 0. When Frequency Band is FDD, both transmit and rece… |
| 1.3.6.1.4.1.4325.3.2.4.1.3 | ColumnaniBsuFrequencyBand | read-only | current | The Frequency Band to which the Channel Center Frequency belongs. Valid Range: 1 - 5.3 GHz UNII Band (5250 - 5350 MHz) 12 - 5.3 GHz General Band (5150 - 5350 M… |
| 1.3.6.1.4.1.4325.3.2.4.1.4 | ColumnaniBsuChannelWidth | read-only | current | The Width of frequency channel in MHz. |
| 1.3.6.1.4.1.4325.3.2.4.1.6 | ColumnaniBsuNumServFlowsPerSu | read-only | current | The number of Service Flows supported per SU. |
| 1.3.6.1.4.1.4325.3.2.4.1.7 | ColumnaniBsuNumSusSupported | read-only | current | The number of SUs supported by this wireless port. |
| 1.3.6.1.4.1.4325.3.2.4.1.9 | ColumnaniBsuSuRadioRegPowerLimit | read-only | current | This parameter constraints the maximum power at which a SU radio can transmit. This information is conveyed to all the SUs within a WSS via the CD packet. It i… |
| 1.3.6.1.4.1.4325.3.2.4.1.10 | ColumnaniBsuTargetFrequency | read-only | current | The Current Target Frequency in MHz. To change the configuration of this value, use the object aniBsuWirelessIfConfTargetFrequency for PW1000 (or aniBsuWireles… |
| 1.3.6.1.4.1.4325.3.2.6 | TableaniBsuQosLinkTable | not-accessible | current | This table contains QOS Link related information for each BSU Wireless port. The total sum of BE, CIR, CBR bandwidths should be 100%. |
| 1.3.6.1.4.1.4325.3.2.6.1 | RowaniBsuQosLinkEntry | not-accessible | current | An entry containing QOS Link attributes for this particular port. |
| 1.3.6.1.4.1.4325.3.2.6.1.1 | ColumnaniBsuBEBandwidth | read-only | current | The BE Bandwidth as a percentage of total bandwidth. |
| 1.3.6.1.4.1.4325.3.2.6.1.2 | ColumnaniBsuCIRBandwidth | read-only | current | The CIR Bandwidth as a percentage of total bandwidth. |
| 1.3.6.1.4.1.4325.3.2.6.1.3 | ColumnaniBsuCBRBandwidth | read-only | current | The CBR Bandwidth as a percentage of total bandwidth. |
| 1.3.6.1.4.1.4325.3.2.7 | TableaniBsuPowerControlTable | not-accessible | current | This table contains Power Control related information for each BSU Wireless port. |
| 1.3.6.1.4.1.4325.3.2.7.1 | RowaniBsuPowerControlEntry | not-accessible | current | An entry containing Power Control attributes for this particular port. |
| 1.3.6.1.4.1.4325.3.2.7.1.2 | ColumnaniBsuReceivePower | read-write | current | This parameter sets the upstream receiver power on the WSS. The range is between -60 to -90 (dBm) It cannot be modified when BSU is in point to point mode. |
| 1.3.6.1.4.1.4325.3.2.7.1.3 | ColumnaniBsuWssRadioRegPowerLimit | read-only | current | This parameter constraints the maximum power at which the radio for this WSS can transmit. It is equal to the EIRP (Effective Incidental Radiated Power) specif… |
| 1.3.6.1.4.1.4325.3.2.8 | TableaniBsuAntennaTable | not-accessible | current | This table contains Antenna related information for each BSU Wireless port. |
| 1.3.6.1.4.1.4325.3.2.8.1 | RowaniBsuAntennaEntry | not-accessible | current | An entry containing Antenna attributes for this particular port. |
| 1.3.6.1.4.1.4325.3.2.8.1.1 | ColumnaniBsuAntennaDiversityFlag | read-only | current | This flag shows whether antenna diversity has been enabled (1) or disabled (2) for this SU. |
| 1.3.6.1.4.1.4325.3.2.8.1.2 | ColumnaniBsuAntennaDiversityMode | read-only | current | This shows whether diversity is Sync Based (1) or Training Sequence Based (2) |
| 1.3.6.1.4.1.4325.3.2.8.1.4 | ColumnaniBsuBcastAntennaPolarization | read-only | current | The default broadcast antenna polarization. |
| 1.3.6.1.4.1.4325.3.2.9 | TableaniBsuSectorTable | not-accessible | current | This table contains Sector related information for each BSU Wireless port. |
| 1.3.6.1.4.1.4325.3.2.9.1 | RowaniBsuSectorEntry | not-accessible | current | An entry containing Sector attributes for this particular port. |
| 1.3.6.1.4.1.4325.3.2.9.1.2 | ColumnaniBsuSectorName | read-only | current | The descriptive name of the sector identified by aniBsuSectorId. |
| 1.3.6.1.4.1.4325.3.2.10 | NodeaniBsuWirelessPtPConfGroup | |||
| 1.3.6.1.4.1.4325.3.2.10.1 | ScalaraniBsuWirelessPtPConfFrequencyBand | read-only | current | The Frequency Band to which the Channel Center Frequency belongs. Valid Range: 1 - 5.3 GHz UNII Band (5250 - 5350 MHz) 12 - 5.3 GHz General Band (5150 - 5350 M… |
| 1.3.6.1.4.1.4325.3.2.10.2 | ScalaraniBsuWirelessPtPConfChannelWidth | read-write | current | The Channel Width. width-2 refers to 2MHz, width-3 refers to 3MHz width-4 refers to 4MHz, width-5 refers to 5MHz,width-6 refers to 6MHz width-7 refers to 7MHz,… |
| 1.3.6.1.4.1.4325.3.2.10.3 | ScalaraniBsuWirelessPtPConfTDDFrameSize | read-write | current | The total size of the TDD Frame. For PW620, only low-latency and normal-mode are allowed. Also refer to the constraints listed under aniBsuWirelessPtPConfChann… |
| 1.3.6.1.4.1.4325.3.2.10.4 | ScalaraniBsuWirelessPtPConfCellRadius | read-write | current | The cell radius or link distance Refer to the constraints listed under aniBsuWirelessPtPConfChannelWidth description. Note: When this object is changed through… |
| 1.3.6.1.4.1.4325.3.2.10.5 | ScalaraniBsuWirelessPtPConfDSUSRatio | read-write | current | The Downstream upstream ratio (DS/US ratio). This allows the user to configure how the total available bandwidth is split between downstream and upsteam. ds70-… |
| 1.3.6.1.4.1.4325.3.2.10.6 | ScalaraniBsuWirelessPtPConfPolarization | read-only | current | The antenna polarization. |
| 1.3.6.1.4.1.4325.3.2.10.7 | ScalaraniBsuWirelessPtPConfTargetFrequency | read-write | current | The Target Frequency in MHz. Its range depends on Channel Width. 1) 5.3 GHz UNII Band (5250 - 5350 MHz). The center frequencies in this band are within 5250 + … |
| 1.3.6.1.4.1.4325.3.2.10.8 | ScalaraniBsuWirelessPtPConfBsuRadioRegPowerLimit | read-write | current | It is the maximum power at which the BSU radio is allowed to transmit. Antenna Gain is added to this maximum power to get EIRP (Effective Incidental Radiated P… |
| 1.3.6.1.4.1.4325.3.2.10.9 | ScalaraniBsuWirelessPtPConfSuRadioRegPowerLimit | read-write | current | It is the maximum power at which a SU radio is allowed to transmit. This information is conveyed to all the SUs via the CD packet. Antenna Gain is added to thi… |
| 1.3.6.1.4.1.4325.3.2.10.10 | ScalaraniBsuWirelessPtPConfModify | read-write | current | This flag is used to modify and commit the changes of the dependent parameters from this group: aniBsuWirelessPtPConfChannelWidth aniBsuWirelessPtPConfTDDFrame… |
| 1.3.6.1.4.1.4325.3.2.10.11 | ScalaraniBsuWirelessPtPConfBsuId | read-write | current | The unique AP/BSU identifier. This is the AP ID required for generating seed for frequency reuse support. Note: When this object is changed through SNMP agent,… |
| 1.3.6.1.4.1.4325.3.2.10.12 | ScalaraniBsuWirelessPtPConfVerifyAllSu | read-only | current | This flag is used to verify if the current set of BSU wireless parameters, that is, aniBsuWirelessPtPConfChannelWidth, aniBsuWirelessPtPConfTargetFrequency, an… |
| 1.3.6.1.4.1.4325.3.2.10.13 | ScalaraniBsuWirelessPtPConfSwitchToFrequency | read-write | current | The Frequency selected to be switched. This frequency should be either one of the frequency entries in the aniBsuWirelessFreqOperTable or the current target fr… |
| 1.3.6.1.4.1.4325.3.2.10.14 | ScalaraniBsuWirelessPtPConfSuAFSTimeout | read-write | current | Configure AFS SU Timeout (second) |
| 1.3.6.1.4.1.4325.3.2.11 | NodeaniBsuWirelessPtPStatusGroup | |||
| 1.3.6.1.4.1.4325.3.2.11.1 | ScalaraniBsuWirelessPtPStatusMaxDSAvailBW | read-only | current | The maximum Downstream available bandwidth in kbps based on the current wireless configuration. |
| 1.3.6.1.4.1.4325.3.2.11.2 | ScalaraniBsuWirelessPtPStatusMaxUSAvailBW | read-only | current | The maximum Upstream available bandwidth in kbps based on the current wireless configuration. |
| 1.3.6.1.4.1.4325.3.2.11.3 | ScalaraniBsuWirelessPtPStatusTDDFrameSize | read-only | current | The total size of the TDD Frame low-latency is 2000 ticks normal-mode is 5000 ticks or 2500 ticks For PW620, only low-latency and normal-mode are allowed. Also… |
| 1.3.6.1.4.1.4325.3.2.12 | TableaniBsuWirelessFreqAdminTable | not-accessible | current | This table is used to configure the BSU frequency table. |
| 1.3.6.1.4.1.4325.3.2.12.1 | RowaniBsuWirelessFreqAdminEntry | not-accessible | current | An entry containing the frequncy for this particular index. |
| 1.3.6.1.4.1.4325.3.2.12.1.1 | ColumnaniBsuWirelessFreqAdminIndex | read-only | current | The index for this table. |
| 1.3.6.1.4.1.4325.3.2.12.1.2 | ColumnaniBsuWirelessFreqAdminFreqValue | read-write | current | This object is used to configure the desired frequency values for the frequency table. Upto 19 frequency values can be added to the table. All frequencies shou… |
| 1.3.6.1.4.1.4325.3.2.13 | TableaniBsuWirelessFreqOperTable | not-accessible | current | This table is used to view the current frequency table. Each entry in the aniBsuWirelessFreqAdminTable has a corresponding entry in this table. All parameters … |
| 1.3.6.1.4.1.4325.3.2.13.1 | RowaniBsuWirelessFreqOperEntry | not-accessible | current | An entry containing the frequncy for this particular index. |
| 1.3.6.1.4.1.4325.3.2.13.1.1 | ColumnaniBsuWirelessFreqOperIndex | read-only | current | The index for this table. |
| 1.3.6.1.4.1.4325.3.2.13.1.2 | ColumnaniBsuWirelessFreqOperFreqValue | read-only | current | This object displays the current frequency value within the frequency table. To change the configuration of the frequency table, use the aniBsuWirelessFreqAdmi… |
| 1.3.6.1.4.1.4325.3.2.14 | NodeaniBsuWirelessSysConfGroup | |||
| 1.3.6.1.4.1.4325.3.2.14.1 | ScalaraniBsuWirelessSysConfBsuId | read-write | current | The unique BSU identifier. This is the BSU ID required for generating seed for frequency reuse support. Note: When this object is changed through SNMP agent, i… |
| 1.3.6.1.4.1.4325.3.2.14.2 | ScalaraniBsuWirelessSysConfFrameSize | read-only | current | The total size of the Frame in ticks. |
| 1.3.6.1.4.1.4325.3.2.14.3 | ScalaraniBsuWirelessSysConfFrameDownstreamSize | read-only | current | The number of ticks in the Downstream portion of the frame. |
| 1.3.6.1.4.1.4325.3.2.14.4 | ScalaraniBsuWirelessSysConfFrameUpstreamSize | read-only | current | The number of ticks in the Upstream portion of the frame. |
| 1.3.6.1.4.1.4325.3.2.14.5 | ScalaraniBsuWirelessSysConfDSUSRatio | read-only | current | The Downstream upstream ratio (DS/US ratio). ds70-us30 is 70/30 ds60-us40 is 60/40 ds50-us50 is 50/50 ds40-us60 is 40/60 ds30-us70 is 30/70 |
| 1.3.6.1.4.1.4325.3.2.15 | TableaniBsuWirelessIfConfTable | not-accessible | current | This table is used to configure the BSU wireless parameters per wireless port. |
| 1.3.6.1.4.1.4325.3.2.15.1 | RowaniBsuWirelessIfConfEntry | not-accessible | current | An entry for this particular wireless port. |
| 1.3.6.1.4.1.4325.3.2.15.1.1 | ColumnaniBsuWirelessIfConfTargetFrequency | read-write | current | The Target Frequency in MHz. Its range depends on Channel Width. 1) 5.3 GHz UNII Band (5250 - 5350 MHz). The center frequencies in this band are within 5250 + … |
| 1.3.6.1.4.1.4325.3.2.15.1.2 | ColumnaniBsuWirelessIfConfVerifyAllSu | read-only | current | This flag is used to verify if the current set of BSU wireless parameters, that is, aniBsuWirelessPtPConfChannelWidth, aniBsuWirelessPtPConfTargetFrequency, an… |
| 1.3.6.1.4.1.4325.3.2.15.1.3 | ColumnaniBsuWirelessIfConfSwitchToFrequency | read-write | current | The Frequency selected to be switched. This frequency should be either one of the frequency entries in the aniBsuWirelessFreqOperTable or the current target fr… |
| 1.3.6.1.4.1.4325.3.2.15.1.50 | ColumnaniBsuWirelessIfConfModify | read-write | current | This flag is used to modify and commit the changes of the dependent parameters from this group: aniBsuWirelessIfConfTargetFrequency aniBsuWirelessFreqAdminTabl… |
| 1.3.6.1.4.1.4325.3.2.16 | TableaniBsuWirelessAFSTable | not-accessible | current | This table is used to configure the BSU wireless AFS parameters per wireless port. |
| 1.3.6.1.4.1.4325.3.2.16.1 | RowaniBsuWirelessAFSConfEntry | not-accessible | current | An entry for this particular wireless port. |
| 1.3.6.1.4.1.4325.3.2.16.1.1 | ColumnaniBsuWirelessAFSFlag | read-write | current | Enable or disable AFS. |
| 1.3.6.1.4.1.4325.3.2.16.1.2 | ColumnaniBsuWirelessAFSMinSwitchDuration | read-write | current | Configure AFS minimum switch duration in database (second) |
| 1.3.6.1.4.1.4325.3.2.16.1.3 | ColumnaniBsuWirelessAFSMinNotificationDuration | read-write | current | Configure AFS minimum notification duration (second) |
| 1.3.6.1.4.1.4325.3.2.16.1.4 | ColumnaniBsuWirelessAFSErrPercentage | read-write | current | Configure AFS minimum error percentage. |
| 1.3.6.1.4.1.4325.3.2.16.1.5 | ColumnaniBsuWirelessAFSMinSwitchBytes | read-write | current | Configure AFS minimum switch bytes. |