CABH-QOS2-MIB
54 objects
This MIB module supplies parameters for the configuration and monitoring of CableHome QoS capabilities.
Imported Objects
| CLAB-DEF-MIB | clabProjCableHome |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.4.8 | IdentitycabhQos2Mib | This MIB module supplies parameters for the configuration and monitoring of CableHome QoS capabilities. | ||
| 1.3.6.1.4.1.4491.2.4.8.0 | NodecabhQos2Mib2Notifications | |||
| 1.3.6.1.4.1.4491.2.4.8.1 | NodecabhQos2MibObjects | |||
| 1.3.6.1.4.1.4491.2.4.8.1.1 | NodecabhQos2Base | |||
| 1.3.6.1.4.1.4491.2.4.8.1.1.1 | ScalarcabhQos2SetToFactory | read-write | current | When this object is set to true(1), the PS MUST clear all the entries in cabhQos2PolicyTable and cabhQos2TrafficClassTable. Reading this object always returns … |
| 1.3.6.1.4.1.4491.2.4.8.1.1.2 | ScalarcabhQos2LastSetToFactory | read-only | current | The value of sysUpTime when cabhQos2SetToFactory was last set to true. Zero if never reset. |
| 1.3.6.1.4.1.4491.2.4.8.1.2 | NodecabhQos2PsIfAttributes | |||
| 1.3.6.1.4.1.4491.2.4.8.1.2.1 | TablecabhQos2PsIfAttribTable | not-accessible | current | This table contains interface attributes. It includes the number of media access priorities and number of queues associated with each PS interface in the Resid… |
| 1.3.6.1.4.1.4491.2.4.8.1.2.1.1 | RowcabhQos2PsIfAttribEntry | not-accessible | current | Number of media access priorities and number of queues for each PS interface in the Residential Gateway. PS does not need to provide support for entries associ… |
| 1.3.6.1.4.1.4491.2.4.8.1.2.1.1.1 | ColumncabhQos2PsIfAttribNumPriorities | read-only | current | The number of media access priorities supported by this interface. |
| 1.3.6.1.4.1.4491.2.4.8.1.2.1.1.2 | ColumncabhQos2PsIfAttribNumQueues | read-only | current | The number of queues associated with this interface. |
| 1.3.6.1.4.1.4491.2.4.8.1.3 | NodecabhQos2PolicyHolderObjects | |||
| 1.3.6.1.4.1.4491.2.4.8.1.3.1 | ScalarcabhQos2PolicyHolderEnabled | read-write | current | The value true indicates that the Policy Holder entity is active and advertised in PS UPnP standard discovery mechanisms; false indicates it is disabled. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.2 | ScalarcabhQos2PolicyAdmissionControl | read-write | current | Indicates if the QoS Policy Admission Control is enabled or disabled for all the traffic requests. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.3 | ScalarcabhQos2NumActivePolicyHolder | read-only | current | Indicates the number of active policy holders the PS have discovered in the LAN. This object includes the PS Policy Holder if active. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4 | TablecabhQos2PolicyTable | not-accessible | current | This table contains the operator and user created policies for the management of QoS for applications. PS creates non-persistent entries (of type 'upnp') for t… |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1 | RowcabhQos2PolicyEntry | not-accessible | current | The indices for these entries. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.1 | ColumncabhQos2PolicyOwner | not-accessible | current | This Index defines the policy creation owner. The entries of type 'upnp' are dynamically created by the PS for the applications, services and devices that it d… |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.2 | ColumncabhQos2PolicyOwnerRuleId | not-accessible | current | Index for the set of rules related to an owner index. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.3 | ColumncabhQos2PolicyRuleOrder | read-create | current | The order in which the policy rules are processed within An owner. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.4 | ColumncabhQos2PolicyAppDomain | read-create | current | Vendor domain name from the Vendor application name URN. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.5 | ColumncabhQos2PolicyAppName | read-create | current | Text description of the application. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.6 | ColumncabhQos2PolicyServiceProvDomain | read-create | current | The service Provider Service Domain Name from the service Provider URN. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.7 | ColumncabhQos2PolicyServiceName | read-create | current | Text description of the Service. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.8 | ColumncabhQos2PolicyPortDomain | read-create | current | Domain name from the Port URN. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.9 | ColumncabhQos2PolicyPortNumber | read-create | current | Well known IP transport port of the application. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.10 | ColumncabhQos2PolicyIpType | read-create | current | The type of InetAddress for cabhQos2PolicySrcIp, and cabhQos2PolicyDestIp. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.11 | ColumncabhQos2PolicyIpProtocol | read-create | current | The IANA-defined IP protocol number representing the IP protocol to match against the IPv4 protocol number or the IPv6 Next- Header number in the packet. '0' m… |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.12 | ColumncabhQos2PolicySrcIp | read-create | current | The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.13 | ColumncabhQos2PolicyDestIp | read-create | current | The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.14 | ColumncabhQos2PolicySrcPort | read-create | current | The value that the layer-4 source port number in the packet must have in order to match this policy entry. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.15 | ColumncabhQos2PolicyDestPort | read-create | current | The value that the layer-4 destination port number in the packet must have in order to match this policy entry. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.16 | ColumncabhQos2PolicyTraffImpNum | read-create | current | The Traffic priority being assigned to this policy. The final packet tagging is determined by 802.1D rules with the priority hierarchy order (highest to lowest… |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.17 | ColumncabhQos2PolicyUserImportance | read-create | current | The UPnP relative value to determine the allocation or reallocation of resources to multiple streams. |
| 1.3.6.1.4.1.4491.2.4.8.1.3.4.1.18 | ColumncabhQos2PolicyRowStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time. The PS MUST NOT allow creation of new entry or modification to… |
| 1.3.6.1.4.1.4491.2.4.8.1.4 | NodecabhQos2DeviceObjects | |||
| 1.3.6.1.4.1.4491.2.4.8.1.4.1 | TablecabhQos2TrafficClassTable | not-accessible | current | This table contains the Classifiers being configured in the PS as an intermediate QOS device. For matching classifiers the PS processes entries in a sorted man… |
| 1.3.6.1.4.1.4491.2.4.8.1.4.1.1 | RowcabhQos2TrafficClassEntry | not-accessible | current | The conceptual row definition of this table. Only entries with cabhQos2TrafficClassMethod 'static' do persist after PS reboot. |
| 1.3.6.1.4.1.4491.2.4.8.1.4.1.1.1 | ColumncabhQos2TrafficClassMethod | not-accessible | current | Indicates how this entry have been created. 'static' indicates that the entry has been provisioned via SNMP or related mechanisms like a config file. 'upnp' in… |
| 1.3.6.1.4.1.4491.2.4.8.1.4.1.1.2 | ColumncabhQos2TrafficClassIdx | not-accessible | current | The index of this conceptual row entry. |
| 1.3.6.1.4.1.4491.2.4.8.1.4.1.1.3 | ColumncabhQos2TrafficClassProtocol | read-create | current | The IANA IP transport protocol designated for this classifier. '0' means no protocol is specified as matching criteria. |
| 1.3.6.1.4.1.4491.2.4.8.1.4.1.1.4 | ColumncabhQos2TrafficClassIpType | read-create | current | The type of InetAddress for cabhQos2TrafficClassSrcIp, and cabhQos2TrafficClassDestIp. |
| 1.3.6.1.4.1.4491.2.4.8.1.4.1.1.5 | ColumncabhQos2TrafficClassSrcIp | read-create | current | The IP address to match against the packet's source IP address for this classifier. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. |
| 1.3.6.1.4.1.4491.2.4.8.1.4.1.1.6 | ColumncabhQos2TrafficClassDestIp | read-create | current | The IP address to match against the packet's source IP address fro this classifier. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. |
| 1.3.6.1.4.1.4491.2.4.8.1.4.1.1.7 | ColumncabhQos2TrafficClassSrcPort | read-create | current | The value that the layer-4 source port number in the packet must have in order to match this classifier entry. |
| 1.3.6.1.4.1.4491.2.4.8.1.4.1.1.8 | ColumncabhQos2TrafficClassDestPort | read-create | current | The value that the layer-4 destination port number in the packet must have in order to match this classifier entry. |
| 1.3.6.1.4.1.4491.2.4.8.1.4.1.1.9 | ColumncabhQos2TrafficClassImpNum | read-create | current | The traffic priority assigned to this classifier and used for the tagging of the packet streams. |
| 1.3.6.1.4.1.4491.2.4.8.1.4.1.1.10 | ColumncabhQos2TrafficClassRowStatus | read-create | current | The status of this conceptual row. All writable objects in rows with cabhQosTrafficMethod 'static' may be modified at any time. An SNMP Set to Entries with cab… |
| 1.3.6.1.4.1.4491.2.4.8.2 | NodecabhQos2Conformance | |||
| 1.3.6.1.4.1.4491.2.4.8.2.1 | NodecabhQos2Compliances | |||
| 1.3.6.1.4.1.4491.2.4.8.2.1.1 | CompliancecabhQos2Compliance | current | The compliance statement for devices that implement CableHome QOS UPnP capabilities. | |
| 1.3.6.1.4.1.4491.2.4.8.2.2 | NodecabhQos2Groups | |||
| 1.3.6.1.4.1.4491.2.4.8.2.2.1 | GroupcabhQos2Group | current | Group of objects for CableHome QOS management. | |
| 1.3.6.1.4.1.4491.2.4.8.2.2.2 | GroupcabhQos2ClassifierGroup | current | Group of objects for cableHome QOS Packet classification. |