MIB Viewer

Search, upload, browse, or download from a database of over 11,000 SNMP MIBs. MIB Viewer lets you look up any MIB object by name, OID, or number, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

CADANT-MPLS-MIB

14 objects

Imported Objects

CADANT-PRODUCTS-MIB	cadMpls
INET-ADDRESS-MIB	InetAddress InetAddressType
SNMPv2-CONF	MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI	Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC	DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue

OID	Name	Access	Status	Description
1.3.6.1.4.1.4998.1.1.130.1	IdentitycadMplsMIB			This is the management MIB contains Cadant proprietary MPLS MIB information. Copyright 2013 Arris International, Inc. All rights reserved.
1.3.6.1.4.1.4998.1.1.130.1.1	NodecadMplsMIBObjects
1.3.6.1.4.1.4998.1.1.130.1.1.1	NodecadMplsParams
1.3.6.1.4.1.4998.1.1.130.1.1.1.1	ScalarcadMplsLdpHelloHoldTimer	read-write	current	The 16-bit integer value which is the configured link Hello hold timer for the local LDP router in seconds. A value of 65535 means infinite
1.3.6.1.4.1.4998.1.1.130.1.1.1.2	ScalarcadMplsLdpTargetedHelloHoldTimer	read-write	current	The 16-bit integer value which is the configured targeted Hello hold timer for the local LDP router in seconds. A value of 65535 means infinite
1.3.6.1.4.1.4998.1.1.130.1.1.1.3	ScalarcadMplsLdpKeepAliveHoldTimer	read-write	current	The 16-bit integer value which is the configured Keep Alive hold timer for the local LDP router in seconds.
1.3.6.1.4.1.4998.1.1.130.1.1.1.4	ScalarcadMplsLdpVcDescription	read-write	current	This is the 64 byte string configured as an LDP Interface Parameter PW Description.
1.3.6.1.4.1.4998.1.1.130.1.1.2	TablecadMplsLdpNeighborTable	not-accessible	current	MPLS LDP neighbor table.
1.3.6.1.4.1.4998.1.1.130.1.1.2.1	RowcadMplsLdpNeighborEntry	not-accessible	current
1.3.6.1.4.1.4998.1.1.130.1.1.2.1.1	ColumncadMplsLdpNeighborAddressType	not-accessible	current	This is the MPLS Peer Address Type. Only ipv4(1) or ipv6(2) will be supported.
1.3.6.1.4.1.4998.1.1.130.1.1.2.1.2	ColumncadMplsLdpNeighborIpAddress	not-accessible	current	This is the IP address of the LDP neighbor. IPv4 and IPv6 addresses are supported.
1.3.6.1.4.1.4998.1.1.130.1.1.2.1.3	ColumncadMplsLdpNeighborPassword	read-create	current	This is the MD5 password used for TCP authentication for this LDP neighbor.
1.3.6.1.4.1.4998.1.1.130.1.1.2.1.4	ColumncadMplsLdpNeighborTargetedPeer	read-create	current	If this value is set to true, then this neighbor is a CLI configured Targeted LDP peer. The CMTS will consider this peer eligible so will accept discovery mess…
1.3.6.1.4.1.4998.1.1.130.1.1.2.1.5	ColumncadMplsLdpNeighborRowStatus	read-create	current	Row Status for this table entry.