CBS-HARDWARE-MIB
100 objects
This MIB module defines the objects to identify and monitor Crossbeam Systems hardware.
Imported Objects
| CROSSBEAM-SYSTEMS-MIB | cbsMgmt cbsMIBs cbsTraps |
| HOST-RESOURCES-MIB | KBytes ProductID |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6848.2.1 | NodecbsHardware | |||
| 1.3.6.1.4.1.6848.2.1.1 | NodecbsHwSystem | |||
| 1.3.6.1.4.1.6848.2.1.1.1 | ScalarcbsHwSystemProductID | read-only | current | The identifier for this system |
| 1.3.6.1.4.1.6848.2.1.1.2 | ScalarcbsHwSystemDescription | read-only | current | A textual description of the product. |
| 1.3.6.1.4.1.6848.2.1.1.3 | ScalarcbsHwSystemSerialNumber | read-only | current | The serial number of the system. |
| 1.3.6.1.4.1.6848.2.1.1.4 | ScalarcbsHwSystemBackplaneRevision | read-only | current | The Revision of the system backplane. |
| 1.3.6.1.4.1.6848.2.1.2 | NodecbsHwSystemStatus | |||
| 1.3.6.1.4.1.6848.2.1.2.1 | ScalarcbsHwSystemRedundentPowerSupplyStatus | read-only | obsolete | Indicates that the redundent power supply is operational. This object is obsoleted in favor of separate objects for AC and DC power supply. |
| 1.3.6.1.4.1.6848.2.1.2.2 | ScalarcbsHwSystemRedundentPowerFeedStatus | read-only | obsolete | Indicates that both of the redundent backplane power feeds are operational. This object is obsoleted in favor of separate objects for AC and DC power feed. |
| 1.3.6.1.4.1.6848.2.1.2.3 | ScalarcbsHwSystemChassisTemp | read-only | current | The temperature of the chassis air flow as measured at the upper fan tray. |
| 1.3.6.1.4.1.6848.2.1.2.4 | ScalarcbsHwSystemUpperFanTray | read-only | current | The upper fan tray is present in the system. |
| 1.3.6.1.4.1.6848.2.1.2.5 | ScalarcbsHwSystemLowerFanTray | read-only | current | The lower fan tray is present in the system. |
| 1.3.6.1.4.1.6848.2.1.2.6 | ScalarcbsHwSystemAlarm | read-only | current | Indicates the highest current alarm state of the system. |
| 1.3.6.1.4.1.6848.2.1.2.7 | ScalarcbsHwSystemPowerType | read-only | current | Indicates the power type of the system. |
| 1.3.6.1.4.1.6848.2.1.2.8 | ScalarcbsHwSystemRedundentACPowerSupplyStatus | read-only | current | Indicates that the redundent AC power supply is operational. Will return down (i.e. not-operational) for DC chassis. |
| 1.3.6.1.4.1.6848.2.1.2.9 | ScalarcbsHwSystemRedundentACPowerFeedStatus | read-only | current | Indicates that both of the redundent backplane AC power feeds are operational. Will return down (i.e. not-operational) for DC chassis. |
| 1.3.6.1.4.1.6848.2.1.2.10 | ScalarcbsHwSystemDCPowerFilterA | read-only | current | Indicates if DC power filter A is present or not present. Will return not present for AC chassis. |
| 1.3.6.1.4.1.6848.2.1.2.11 | ScalarcbsHwSystemDCPowerFilterB | read-only | current | Indicates if DC power filter B is present or not present. Will return not present for AC chassis. |
| 1.3.6.1.4.1.6848.2.1.2.12 | ScalarcbsHwSystemDCPowerFeedA | read-only | current | Indicates if DC power feed A is present or not present. Will return not present for AC chassis. |
| 1.3.6.1.4.1.6848.2.1.2.13 | ScalarcbsHwSystemDCPowerFeedB | read-only | current | Indicates if DC power feed B is present or not present. Will return not present for AC chassis. |
| 1.3.6.1.4.1.6848.2.1.3 | TablecbsFanStatusTable | not-accessible | current | This table contains information about the fan trays currently installed in the system. |
| 1.3.6.1.4.1.6848.2.1.3.1 | RowcbsFanStatusEntry | not-accessible | current | An entry in the hardware module table. |
| 1.3.6.1.4.1.6848.2.1.3.1.1 | ColumncbsFanGroupIndex | not-accessible | current | Index of the fan tray. |
| 1.3.6.1.4.1.6848.2.1.3.1.2 | ColumncbsFanIndex | not-accessible | current | The fan number in the fan tray. |
| 1.3.6.1.4.1.6848.2.1.3.1.3 | ColumncbsFanStatus | read-only | current | Operational status of the fan. |
| 1.3.6.1.4.1.6848.2.1.4 | TablecbsHwModuleTable | not-accessible | current | This table contains information about the processor modules currently installed in the system. |
| 1.3.6.1.4.1.6848.2.1.4.1 | RowcbsHwModuleEntry | not-accessible | current | An entry in the hardware module table. |
| 1.3.6.1.4.1.6848.2.1.4.1.1 | ColumncbsHwModuleID | read-only | current | The product ID for the module. |
| 1.3.6.1.4.1.6848.2.1.4.1.2 | ColumncbsHwModuleProductID | read-only | current | The product ID for the module. |
| 1.3.6.1.4.1.6848.2.1.4.1.3 | ColumncbsHwModuleDescription | read-only | current | A short description of the module. |
| 1.3.6.1.4.1.6848.2.1.4.1.4 | ColumncbsHwModuleBoardRevision | read-only | current | The board revision level of the module. |
| 1.3.6.1.4.1.6848.2.1.4.1.5 | ColumncbsHwModuleSerialNumber | read-only | current | The serial number of the module. |
| 1.3.6.1.4.1.6848.2.1.4.1.6 | ColumncbsHwModuleBootStrapRev | read-only | current | Total static DRAM memory on the module in Kilobytes. |
| 1.3.6.1.4.1.6848.2.1.4.1.7 | ColumncbsHwModuleBootloaderRev | read-only | current | Total static DRAM memory on the module in Kilobytes. |
| 1.3.6.1.4.1.6848.2.1.4.1.8 | ColumncbsHwModuleDiagnosticsRev | read-only | current | Total static DRAM memory on the module in Kilobytes. |
| 1.3.6.1.4.1.6848.2.1.4.1.9 | ColumncbsHwModuleSDRAMSize | read-only | current | Total Static DRAM memory on the module in Kilobytes. |
| 1.3.6.1.4.1.6848.2.1.4.1.10 | ColumncbsHwModuleRDRAMSize | read-only | current | Total RDRAM memory on the module in Kilobytes. |
| 1.3.6.1.4.1.6848.2.1.4.1.11 | ColumncbsHwModuleDiskAPresent | read-only | current | The first disk storage device is present. |
| 1.3.6.1.4.1.6848.2.1.4.1.12 | ColumncbsHwModuleDiskBPresent | read-only | current | The second disk storage device is present. |
| 1.3.6.1.4.1.6848.2.1.4.1.13 | ColumncbsHwModuleDuartAPresent | read-only | current | The first DUART device is present on the module. |
| 1.3.6.1.4.1.6848.2.1.4.1.14 | ColumncbsHwModuleDuartBPresent | read-only | current | The second DUART device is present on the module. |
| 1.3.6.1.4.1.6848.2.1.4.1.15 | ColumncbsHwModuleAccelCard1Present | read-only | current | The Accelerator Card 1 is present on the module. |
| 1.3.6.1.4.1.6848.2.1.4.1.16 | ColumncbsHwModuleAccelCard2Present | read-only | current | The Accelerator Card 2 is present on the module. |
| 1.3.6.1.4.1.6848.2.1.5 | TablecbsHwComponentRevTable | not-accessible | current | A table containing the revision level of programable hardware components. |
| 1.3.6.1.4.1.6848.2.1.5.1 | RowcbsHwComponentRevEntry | not-accessible | current | An entry in the hardware component revision table. |
| 1.3.6.1.4.1.6848.2.1.5.1.1 | ColumncbsHwComponentIndex | not-accessible | current | Description of the programable component |
| 1.3.6.1.4.1.6848.2.1.5.1.2 | ColumncbsHwComponentDescription | read-only | current | Description of the programable component |
| 1.3.6.1.4.1.6848.2.1.5.1.3 | ColumncbsHwComponentRevision | read-only | current | Revision level of the programable component |
| 1.3.6.1.4.1.6848.2.1.6 | TablecbsHwModuleStatusTable | not-accessible | current | This table contains the status of processor modules currently installed in the system. |
| 1.3.6.1.4.1.6848.2.1.6.1 | RowcbsHwModuleStatusEntry | not-accessible | current | An entry in the hardware module status table. |
| 1.3.6.1.4.1.6848.2.1.6.1.1 | ColumncbsHwModuleStatus | read-only | current | The operational state of the module unavailable - No status is currently available for this module. down - The module is currently down. initializing - The mod… |
| 1.3.6.1.4.1.6848.2.1.6.1.2 | ColumncbsHwModuleCpuTemp | read-only | current | The current CPU temperature in degrees centigrade. |
| 1.3.6.1.4.1.6848.2.1.6.1.3 | ColumncbsHwModuleFPGATemp | read-only | current | The current FPGA temperature in degrees centigrade. |
| 1.3.6.1.4.1.6848.2.1.6.1.4 | ColumncbsHwModuleInTemp | read-only | current | The current temperature at the sensor located at the bottom of the board in degrees centigrade. |
| 1.3.6.1.4.1.6848.2.1.6.1.5 | ColumncbsHwModuleInTempAlarm | read-only | current | Indicates a high temperature alarm for the bottom board sensor. |
| 1.3.6.1.4.1.6848.2.1.6.1.6 | ColumncbsHwModuleExhaustTemp | read-only | current | The current temperature at the sensor located at the top of the board in degrees centigrade. |
| 1.3.6.1.4.1.6848.2.1.6.1.7 | ColumncbsHwModuleExhaustTempAlarm | read-only | current | Indicates a high temperature alarm for the top board sensor. |
| 1.3.6.1.4.1.6848.2.1.6.1.8 | ColumncbsHwModuleCPUVoltage | read-only | current | The current voltage level of the processor supply. This number is in 1/100ths of a volt and the ideal value depends on the speed of the processor. |
| 1.3.6.1.4.1.6848.2.1.6.1.9 | ColumncbsHwModule1-8Voltage | read-only | current | The current voltage level of the 1.8 volt power supply. This number is in 1/100ths of a volt and the ideal value of 1.8 volts will be read as 180. |
| 1.3.6.1.4.1.6848.2.1.6.1.10 | ColumncbsHwModule3-3Voltage | read-only | current | The current voltage level of the 3.3 volt power supply. This number is in 1/100ths of a volt and the ideal value of 3.3 volts will be read as 330. |
| 1.3.6.1.4.1.6848.2.1.6.1.11 | ColumncbsHwModule2-5Voltage | read-only | current | The current voltage level of the 2.5 volt power supply. This number is in 1/100ths of a volt and the ideal value of 2.5 volts will be read as 250. |
| 1.3.6.1.4.1.6848.2.1.6.1.12 | ColumncbsHwModuleControlLinkA | read-only | current | The operation state of control link A. |
| 1.3.6.1.4.1.6848.2.1.6.1.13 | ColumncbsHwModuleControlLinkB | read-only | current | The Operational state of control link B. |
| 1.3.6.1.4.1.6848.2.1.6.1.14 | ColumncbsHwModuleActiveLED | read-only | current | Indicates the board's active LED is on. |
| 1.3.6.1.4.1.6848.2.1.6.1.15 | ColumncbsHwModuleStandbyLED | read-only | current | Indicates the board's standby LED is on. |
| 1.3.6.1.4.1.6848.2.1.6.1.16 | ColumncbsHwModuleFailedLED | read-only | current | Indicates the board's failed LED is on. |
| 1.3.6.1.4.1.6848.2.1.6.1.17 | ColumncbsHwModuleCpu2Temp | read-only | current | For dual processor modules, 2nd CPU's current temperature in degrees centigrade. For modules that don't support it, a special invalid value of 10000 will be re… |
| 1.3.6.1.4.1.6848.2.1.6.1.18 | ColumncbsHwModuleCPU2Voltage | read-only | current | For dual processor modules, 2nd CPU's current voltage level. This number is in 1/100ths of a volt and the ideal value depends on the speed of the processor. Fo… |
| 1.3.6.1.4.1.6848.2.1.6.1.19 | ColumncbsHwModuleFPGA1-8Voltage | read-only | current | FPGA's current voltage level of the 1.8 volt power supply. This number is in 1/100ths of a volt and the ideal value of 1.8 volts will be read as 180. For modul… |
| 1.3.6.1.4.1.6848.2.1.6.1.20 | ColumncbsHwModule125Voltage | read-only | current | Current voltage level of the 1.25 volt power supply. This number is in 1/100ths of a volt and the ideal value of 1.25 volts will be read as 125. For modules th… |
| 1.3.6.1.4.1.6848.2.1.7 | TablecbsHwSdpStatusTable | not-accessible | current | Table containing status of the Switched Data Path backplane links. |
| 1.3.6.1.4.1.6848.2.1.7.1 | RowcbsHwSdpStatusEntry | not-accessible | current | An entry in the hardware SDP status table. |
| 1.3.6.1.4.1.6848.2.1.7.1.1 | ColumncbsHwSdpNpmSlot | not-accessible | current | The slot number of the Network Processor Module end of the link |
| 1.3.6.1.4.1.6848.2.1.7.1.2 | ColumncbsHwSdpRemoteSlot | not-accessible | current | The slot number of the remote end of the link |
| 1.3.6.1.4.1.6848.2.1.7.1.3 | ColumncbsHwSdpNpmState | read-only | current | The operational state of the NPM side of the link. |
| 1.3.6.1.4.1.6848.2.1.7.1.4 | ColumncbsHwSdpRemoteState | read-only | current | The operational state of the remote end of the link. |
| 1.3.6.1.4.1.6848.3.2 | IdentitycbsHardwareMIB | This MIB module defines the objects to identify and monitor Crossbeam Systems hardware. | ||
| 1.3.6.1.4.1.6848.4.1 | NodecbsHwTraps | |||
| 1.3.6.1.4.1.6848.4.1.1 | NotificationcbsHwPowerSupplyFailed | current | One of the redundent power supplies or DC filters has failed or been removed. | |
| 1.3.6.1.4.1.6848.4.1.2 | NotificationcbsHwPowerSupplyRecovered | current | A redundent power supply or DC filter that was previously failed or missing has been replaced. | |
| 1.3.6.1.4.1.6848.4.1.3 | NotificationcbsHwPowerFeedFailed | current | One of the redundent backplane power feed has failed. | |
| 1.3.6.1.4.1.6848.4.1.4 | NotificationcbsHwPowerFeedRecovered | current | One of the redundent backplane power feed that previously not working has become operational. | |
| 1.3.6.1.4.1.6848.4.1.5 | NotificationcbsHwUpperFanTrayInserted | current | A fan tray has been inserted into the system. | |
| 1.3.6.1.4.1.6848.4.1.6 | NotificationcbsHwUpperFanTrayRemoved | current | A fan tray has been removed from the system. | |
| 1.3.6.1.4.1.6848.4.1.7 | NotificationcbsHwLowerFanTrayInserted | current | A fan tray has been inserted into the system. | |
| 1.3.6.1.4.1.6848.4.1.8 | NotificationcbsHwLowerFanTrayRemoved | current | A fan tray has been removed from the system. | |
| 1.3.6.1.4.1.6848.4.1.9 | NotificationcbsHwFanFailed | current | One of the system cooling fans has failed. | |
| 1.3.6.1.4.1.6848.4.1.10 | NotificationcbsHwFanRecovered | current | A Fan that was inoperative has recovered. | |
| 1.3.6.1.4.1.6848.4.1.11 | NotificationcbsHwSystemAlarmTrap | current | Indicates that the alarm state of the system has changed. | |
| 1.3.6.1.4.1.6848.4.1.12 | NotificationcbsHwChassisTempExceeded | current | Indicates the the chassis temperature, as measure at the exhaust fan has exceeded the maximum. | |
| 1.3.6.1.4.1.6848.4.1.13 | NotificationcbsHwChassisTempNormal | current | Indicates the the chassis temperature, as measure at the exhaust fan has returned to normal. | |
| 1.3.6.1.4.1.6848.4.1.14 | NotificationcbsHwModuleStatusChanged | current | The status of a processor module has changed, the new status of the module that has changed is reported. | |
| 1.3.6.1.4.1.6848.4.1.15 | NotificationcbsHwModuleInserted | current | A processor module been inserted into the system, reports the slot number of the module that has been inserted. | |
| 1.3.6.1.4.1.6848.4.1.16 | NotificationcbsHwModuleRemoved | current | A processor module been removed into the system, reports the slot number of the module that has been removed. | |
| 1.3.6.1.4.1.6848.4.1.17 | NotificationcbsModuleTempExceeded | current | Indicates that the module CPU temperature has execeeded the high limit. | |
| 1.3.6.1.4.1.6848.4.1.18 | NotificationcbsModuleTempNormal | current | Indicates that the module CPU temperature has returned to the normal operating range. | |
| 1.3.6.1.4.1.6848.4.1.19 | NotificationcbsDbhaLinkUp | current | The DBHA link on this CPM has come up. | |
| 1.3.6.1.4.1.6848.4.1.20 | NotificationcbsDbhaLinkDown | current | The DBHA link on this CPM has failed. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ExistentialState | INTEGER { present(1), not-present(2) } | current | Indicates the component exists. |
| OperationalState | INTEGER { up(1), down(2), not-present(3) } | current | The operational state of a hardware subsystem. |