CDMIPController
262 objects
CDMIP IP Controller
Imported Objects
| ComtechEFData | comtechEFData |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6247.4 | IdentitycdmipController | CDMIP IP Controller | ||
| 1.3.6.1.4.1.6247.4.2 | NodecdmipAdministration | |||
| 1.3.6.1.4.1.6247.4.2.1 | ScalarcdmipMibVersion | read-only | current | /*****************************************************************************/ /* * CDM-IP MIB Version Information * * Date App Release MIB Version * ========… |
| 1.3.6.1.4.1.6247.4.2.4 | NodecdmipAccessLists | |||
| 1.3.6.1.4.1.6247.4.2.4.1 | ScalarcdmipAccessIpAddress1 | read-write | current | Access IP Address #1: Used to restrict modem management through Web, Telnet, or SNMP to specific IP Addresses. |
| 1.3.6.1.4.1.6247.4.2.4.2 | ScalarcdmipAccessSubnetMaskLen1 | read-write | current | Subnet Mask Length for Access IP Address #1. |
| 1.3.6.1.4.1.6247.4.2.4.3 | ScalarcdmipAccessIpAddress2 | read-write | current | Access IP Address #2 Used to restrict modem management through Web, Telnet, or SNMP to specific IP Addresses. |
| 1.3.6.1.4.1.6247.4.2.4.4 | ScalarcdmipAccessSubnetMaskLen2 | read-write | current | Subnet Mask Length for Access IP Address #2. |
| 1.3.6.1.4.1.6247.4.2.4.5 | ScalarcdmipAccessIpAddress3 | read-write | current | Access IP Address #3: Used to restrict modem management through Web, Telnet, or SNMP to specific IP Addresses. |
| 1.3.6.1.4.1.6247.4.2.4.6 | ScalarcdmipAccessSubnetMaskLen3 | read-write | current | Subnet Mask Length for Access IP Addres #3. |
| 1.3.6.1.4.1.6247.4.2.4.7 | ScalarcdmipAccessIpAddress4 | read-write | current | Access IP Address #4: Used to restrict modem management through Web, Telnet, or SNMP to specific IP Addresses. |
| 1.3.6.1.4.1.6247.4.2.4.8 | ScalarcdmipAccessSubnetMaskLen4 | read-write | current | Subnet Mask Length for Access IP Address #4. |
| 1.3.6.1.4.1.6247.4.2.4.9 | ScalarcdmipAccessListEnforcement | read-write | current | Access List Enforcement Note: Be sure that you have added the SNMP browser's/manager's IP Address to the access list before enabling access list filtering. Oth… |
| 1.3.6.1.4.1.6247.4.2.5 | NodecdmipFeaturesAvailability | |||
| 1.3.6.1.4.1.6247.4.2.5.3 | ScalarcdmipQosOption | read-only | current | Quality of Server (QoS) FAST Option. |
| 1.3.6.1.4.1.6247.4.2.5.6 | ScalarcdmipEncryptionOption | read-only | current | Triple DES Encryption FAST Option. |
| 1.3.6.1.4.1.6247.4.2.5.7 | ScalarcdmipIgmpOption | read-only | current | IGMP FAST Option. |
| 1.3.6.1.4.1.6247.4.2.5.8 | ScalarcdmipHeaderCompressionOption | read-only | current | IP Header Compression FAST Option. |
| 1.3.6.1.4.1.6247.4.2.5.9 | ScalarcdmipPayloadCompressionOption | read-only | current | IP Payload Compression FAST Option. |
| 1.3.6.1.4.1.6247.4.2.6 | NodecdmipFeaturesConfig | |||
| 1.3.6.1.4.1.6247.4.2.6.2 | ScalarcdmipTelnetFeature | read-write | current | Enable or disable Telnet access for managing the modem. |
| 1.3.6.1.4.1.6247.4.2.6.3 | ScalarcdmipPingReplyFeature | read-write | current | Enable or disable ICMP Ping Reply from the modem. |
| 1.3.6.1.4.1.6247.4.2.6.4 | ScalarcdmipDownlinkRouteMulticastFeature | read-write | current | Enable or disable 'downlink multicast routing' option (Satellite to Ethernet). |
| 1.3.6.1.4.1.6247.4.2.6.7 | ScalarcdmipQosOpt | read-write | current | Enable or disable 'Quality of Service' (QoS) in the modem's router. |
| 1.3.6.1.4.1.6247.4.2.6.10 | ScalarcdmipTransmit3xDesEncryptionOpt | read-write | current | Enable or disable 'transmit 3xDES encryption' option. |
| 1.3.6.1.4.1.6247.4.2.6.12 | ScalarcdmipIgmpOpt | read-write | current | Enable or disable IGMP option. |
| 1.3.6.1.4.1.6247.4.2.6.13 | ScalarcdmipTxHeaderCompressionOpt | read-write | current | Enable or disable the Transmit 'IP Header Compression' option. |
| 1.3.6.1.4.1.6247.4.2.6.14 | ScalarcdmipRxHeaderCompressionOpt | read-write | current | Enable or disable Receive 'IP Header Compression' option. |
| 1.3.6.1.4.1.6247.4.2.6.15 | ScalarcdmipTxPayloadCompressionOpt | read-write | current | Enable or disable 'Tx Payload Compression' option. |
| 1.3.6.1.4.1.6247.4.2.7 | Nodecdmip3xDesConfig | |||
| 1.3.6.1.4.1.6247.4.2.7.3 | ScalarcdmipTransmitKey1 | read-write | current | Triple DES (3xDES) Transmit Encrypt Key #1. The key length is 192 bits (24 bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.4 | ScalarcdmipTransmitKey2 | read-write | current | Triple DES (3xDES) Transmit Encrypt Key #2. The key length is 192 bits (24 bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.5 | ScalarcdmipTransmitKey3 | read-write | current | Triple DES (3xDES) Transmit Encrypt Key #3. The key length is 192 bits (24 Bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.6 | ScalarcdmipTransmitKey4 | read-write | current | Triple DES (3xDES) Transmit Encrypt Key #4. The key length is 192 bits (24 Bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.7 | ScalarcdmipTransmitKey5 | read-write | current | Triple DES (3xDES) Transmit Encrypt Key #5. The key length is 192 bits (24 Bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.8 | ScalarcdmipTransmitKey6 | read-write | current | Triple DES (3xDES) Transmit Encrypt Key #6. The key length is 192 bits (24 Bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.9 | ScalarcdmipTransmitKey7 | read-write | current | Triple DES (3xDES) Transmit Encrypt Key #7. The key length is 192 bits (24 Bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.10 | ScalarcdmipTransmitKey8 | read-write | current | Triple DES (3xDES) Transmit Encrypt Key #8. The key length is 192 bits (24 Bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.11 | ScalarcdmipReceiveKey1 | read-write | current | Triple DES (3xDES) Receive Decrypt Key #1. The key length is 192 bits (24 bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.12 | ScalarcdmipReceiveKey2 | read-write | current | Triple DES (3xDES) Receive Decrypt Key #2. The key length is 192 bits (24 bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.13 | ScalarcdmipReceiveKey3 | read-write | current | Triple DES (3xDES) Receive Decrypt Key #3. The key length is 192 bits (24 Bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.14 | ScalarcdmipReceiveKey4 | read-write | current | Triple DES (3xDES) Receive Decrypt Key #4. The key length is 192 bits (24 Bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.15 | ScalarcdmipReceiveKey5 | read-write | current | Triple DES (3xDES) Receive Decrypt Key #5. The key length is 192 bits (24 Bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.16 | ScalarcdmipReceiveKey6 | read-write | current | Triple DES (3xDES) Receive Decrypt Key #6. The key length is 192 bits (24 Bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.17 | ScalarcdmipReceiveKey7 | read-write | current | Triple DES (3xDES) Receive Decrypt Key #7. The key length is 192 bits (24 Bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.7.18 | ScalarcdmipReceiveKey8 | read-write | current | Triple DES (3xDES) Receive Decrypt Key #8. The key length is 192 bits (24 Bytes or 48 HEX characters). |
| 1.3.6.1.4.1.6247.4.2.8 | NodecdmipSmtp | |||
| 1.3.6.1.4.1.6247.4.2.8.1 | ScalarcdmipSmtpServerIpAddress | read-write | current | IP address of the SMTP server on your local LAN. |
| 1.3.6.1.4.1.6247.4.2.8.2 | ScalarcdmipSmtpDomain | read-write | current | SMTP Domain (i.e. comtechefdata.com) |
| 1.3.6.1.4.1.6247.4.2.8.3 | ScalarcdmipSmtpDestinationName | read-write | current | SMTP Destination Email User Name (i.e. cdmipsupport) |
| 1.3.6.1.4.1.6247.4.2.9 | NodecdmipSnmp | |||
| 1.3.6.1.4.1.6247.4.2.9.1 | ScalarcdmipSnmpTrapDestinationIpAddress | read-write | current | SNMP Trap Destination #1: The primary IP Address to which trap will be sent. |
| 1.3.6.1.4.1.6247.4.2.9.2 | ScalarcdmipSnmpTrapCommunity | read-write | current | The trap community string to be used for SNMP trap messages. |
| 1.3.6.1.4.1.6247.4.2.9.3 | ScalarcdmipSnmpTrapVersion | read-write | current | The SNMP Trap Version: Use V1 for SNMP Version 1 Traps. Use V2 for SNMP Version 2 Notifications. |
| 1.3.6.1.4.1.6247.4.2.9.4 | ScalarcdmipSnmpAuthenticationFailureCommunity | accessible-for-notify | current | NOTE: Used ONLY in the Authentification Failure Trap (No access). The community string which was invalid for a SET or GET SNMP message. |
| 1.3.6.1.4.1.6247.4.2.9.5 | ScalarcdmipSnmpAuthenticationFailureAddress | accessible-for-notify | current | NOTE: Used ONLY in the Authentification Failure Trap (No access). IP Address which sent an SNMP message with an invalid SET or GET community string. |
| 1.3.6.1.4.1.6247.4.2.9.6 | ScalarcdmipSnmpTrapDestinationIpAddress2 | read-write | current | SNMP Trap Destination #2: The secondary IP Address to which traps will be sent. |
| 1.3.6.1.4.1.6247.4.2.10 | ScalarcdmipWorkingMode | read-write | current | Configure the IP Card's working mode. The CDM-IP can operate in any of these modes. 1. Router - Small Network Mode: The system functions as router and uses the… |
| 1.3.6.1.4.1.6247.4.2.11 | ScalarcdmipEasyconnectMulticastOption | read-write | current | Enable/Disable the Easyconnect multicast option. Enabling this option allows the modem working in EasyConnect operation to pass multicast traffic. |
| 1.3.6.1.4.1.6247.4.2.12 | ScalarcdmipHdrcompRefreshRateUdpRtp1 | read-write | current | Header compression Refresh Rate for UDP/RTP1. Valid range is 1 - 600 packets per full IP/UDP/RTP Header. |
| 1.3.6.1.4.1.6247.4.2.13 | ScalarcdmipHdrcompRefreshRateUdp | read-write | current | Header Compression Refresh Rate for UDP. Valid range is 1 - 600 packets per full IP/UDP Header. |
| 1.3.6.1.4.1.6247.4.2.14 | ScalarcdmipHdrcompRefreshRateAllOther | read-write | current | Header Compression Refresh Rate for all other protocols. Valid range is 1 - 600 packet per full IP Header. |
| 1.3.6.1.4.1.6247.4.2.15 | ScalarcdmipPayloadCompRefreshRate | read-write | current | Refresh rate for Payload Compression in packets. Valid range is 1 = 600 packets before a refresh ofthe payload compression algorithm is done. |
| 1.3.6.1.4.1.6247.4.3 | NodecdmipInterfaces | |||
| 1.3.6.1.4.1.6247.4.3.1 | NodecdmipEthernetInterface | |||
| 1.3.6.1.4.1.6247.4.3.1.1 | ScalarcdmipEthernetMacAddress | read-only | current | The MAC address for the Ethernet interface. |
| 1.3.6.1.4.1.6247.4.3.1.2 | ScalarcdmipEthernetSpeed | read-write | current | The speed and mode of the Ehternet interface: The valid settings are: 1. Automatic. 2. 10 Mbps - Half Duplex. 3. 100 Mpbs - Half Duplex. 4. 10 Mbps - Full Dupl… |
| 1.3.6.1.4.1.6247.4.3.1.3 | ScalarcdmipEthernetIpAddress | read-write | current | The IP address for the Ethernet interface. |
| 1.3.6.1.4.1.6247.4.3.1.4 | ScalarcdmipEthernetSubnetPrefixLen | read-write | current | The subnet mask prefix length for the Ethernet interface. |
| 1.3.6.1.4.1.6247.4.3.2 | NodecdmipSatelliteInterface | |||
| 1.3.6.1.4.1.6247.4.3.2.5 | ScalarcdmipSatelliteHdlcAddress1 | read-write | current | HDLC Channel Address #1 filtered by the HSR Valid values of HDLC address depends on the Network mode. In Small Network Mode - Frame will have 1 Byte of HDLC ad… |
| 1.3.6.1.4.1.6247.4.3.2.6 | ScalarcdmipSatelliteHdlcAddress2 | read-write | current | HDLC Channel Address #2 filtered by the HSR Valid values of HDLC address depends on the Network mode. In Small Network Mode - Frame will have 1 Byte of HDLC ad… |
| 1.3.6.1.4.1.6247.4.3.2.7 | ScalarcdmipSatelliteHdlcAddress3 | read-write | current | HDLC Channel Address #3 filtered by the HSR Valid values of HDLC address depends on the Network mode. In Small Network Mode - Frame will have 1 Byte of HDLC ad… |
| 1.3.6.1.4.1.6247.4.3.2.8 | ScalarcdmipSatelliteHdlcAddress4 | read-write | current | HDLC Channel Address #4 filtered by the HSR Valid values of HDLC address depends on the Network mode. In Small Network Mode - Frame will have 1 Byte of HDLC ad… |
| 1.3.6.1.4.1.6247.4.3.2.9 | ScalarcdmipSatelliteHdlcAddressDelete | read-write | current | Used to delete a specified HDLC Address. Setting this entry to value 1...4 deletes/invalidates the corresponding HDLC Address. 1. for HDLCAddress #1 2. for HDL… |
| 1.3.6.1.4.1.6247.4.3.2.10 | ScalarcdmipSatelliteHdlcAddressModeConfig | read-only | current | The size of HDLC address used for frames sent over the satellite interface can range from 0 - 2 bytes. This range allows the system to operate in one of these … |
| 1.3.6.1.4.1.6247.4.4 | NodecdmipRouteTable | |||
| 1.3.6.1.4.1.6247.4.4.3 | TablecdmipIpRouteTable | not-accessible | current | CDMIP IP Route Table |
| 1.3.6.1.4.1.6247.4.4.3.1 | RowcdmipIpRouteEntry | not-accessible | current | CDMIP IP Route Entry |
| 1.3.6.1.4.1.6247.4.4.3.1.1 | ColumncdmipIpRouteIndex | read-write | current | The index for the route table. |
| 1.3.6.1.4.1.6247.4.4.3.1.2 | ColumncdmipIpRouteName | read-write | current | The name for the route. The route name must be unique. |
| 1.3.6.1.4.1.6247.4.4.3.1.3 | ColumncdmipIpRouteDestAddress | read-write | current | The destination IP address for the route. ***Note***: Do not add multicast routes for Vipersat Multicast addresses. |
| 1.3.6.1.4.1.6247.4.4.3.1.4 | ColumncdmipIpRouteDestMaskLen | read-write | current | The number of bits in the subnet mask for the destination IP address for the route. |
| 1.3.6.1.4.1.6247.4.4.3.1.5 | ColumncdmipIpRouteNextHopAddress | read-write | current | The Next Hop IP Address is valid only for routes destined to the Ethernet interface. This IP address must be a locally attached router. Set 'cdmipIpRouteState'… |
| 1.3.6.1.4.1.6247.4.4.3.1.6 | ColumncdmipIpRouteMulticastOptions | read-write | current | Configures how router should handle multicast traffic. Valid options are: 1. Do not forward any multicast traffic (drop all). 2. Forward multicast traffic from… |
| 1.3.6.1.4.1.6247.4.4.3.1.7 | ColumncdmipIpRouteState | read-write | current | The route state specifies the route's destination. The valid values are: 1. To Ethernet (route goes to Ethernet interface). 2. To Satellite (route goes to Sate… |
| 1.3.6.1.4.1.6247.4.4.3.1.8 | ColumncdmipIpRouteHdlcAddress | read-write | current | The HDLC Address is valid only for routes destined to the Satellite interface. This can also be viewed as the 'next-hop' identifier for the route destined to s… |
| 1.3.6.1.4.1.6247.4.4.3.1.9 | ColumncdmipIpRouteHdrComp | read-write | current | Enable or disable IP header compression on this route. To Set this parameter, you need to have Header Compression Feature available on your modem. It may retur… |
| 1.3.6.1.4.1.6247.4.4.3.1.10 | ColumncdmipIpRoutePayloadComp | read-write | current | Enable or disable payload compression on this route. To set this parameter, you need to have Datagram/Payload Compression feature available on your modem. It m… |
| 1.3.6.1.4.1.6247.4.4.3.1.11 | ColumncdmipIpRoute3xDes | read-write | current | Enable or disable 3xDES [Triple DES Encryption] on this route. It may return 'commit_failed' if 3xDES feature is not available on modem. |
| 1.3.6.1.4.1.6247.4.4.3.1.12 | ColumncdmipIpRouteDesKey | read-write | current | Pick which DES key to use for this route. The system supports 8 3xDES (Triple DES - 24 Byte Length) keys. This specifies the 3xDES key to be used for this flow… |
| 1.3.6.1.4.1.6247.4.4.3.1.13 | ColumncdmipIpRouteRowStatus | read-write | current | In SMIv2 tables, the RowStatus textual convention is used to manage the creation and deletion of conceptual rows. This column has six defined values. active(1)… |
| 1.3.6.1.4.1.6247.4.5 | NodecdmipProtocols | |||
| 1.3.6.1.4.1.6247.4.5.1 | NodecdmipIgmpConfig | |||
| 1.3.6.1.4.1.6247.4.5.1.1 | TablecdmipIgmpTable | not-accessible | current | IGMP Table |
| 1.3.6.1.4.1.6247.4.5.1.1.1 | RowcdmipIgmpEntry | not-accessible | current | IGMP Entry |
| 1.3.6.1.4.1.6247.4.5.1.1.1.1 | ColumncdmipIgmpIndex | read-only | current | The index for the IGMP table. |
| 1.3.6.1.4.1.6247.4.5.1.1.1.2 | ColumncdmipIgmpTTL | read-only | current | The IGMP Time to live (TTL) for the multicast group. |
| 1.3.6.1.4.1.6247.4.5.1.1.1.3 | ColumncdmipIgmpClientState | read-only | current | The current state of the multicast group. Possible states are: 1. Idle. 2. Active. 3. Closing. |
| 1.3.6.1.4.1.6247.4.5.1.1.1.4 | ColumncdmipIgmpSrc | read-only | current | Show which interface the multicast group is coming from. Possible values are: 1. Other - from the Ethernet interface. 2. Sat - from the Satellite interface. |
| 1.3.6.1.4.1.6247.4.5.1.1.1.5 | ColumncdmipIgmpGroupIpAddress | read-only | current | The multicast address for the IGMP group. |
| 1.3.6.1.4.1.6247.4.5.1.2 | NodecdmipIgmpReceiver | |||
| 1.3.6.1.4.1.6247.4.5.1.2.1 | ScalarcdmipIgmpEnable | read-only | current | Enable or disable IGMP. 1. IGMP is enabled. 2. IGMP is disabled. |
| 1.3.6.1.4.1.6247.4.5.1.2.2 | ScalarcdmipIgmpQueryPeriod | read-write | current | Modem as IGMP Server: IGMP query period in seconds. |
| 1.3.6.1.4.1.6247.4.5.1.2.3 | ScalarcdmipIgmpMaxRespTime | read-write | current | Modem as Sever: IGMP max. response time in seconds. |
| 1.3.6.1.4.1.6247.4.5.1.2.4 | ScalarcdmipIgmpMaxMissBeforeDrop | read-write | current | Modem as Server: Number of missed responses before leaving an IGMP group. |
| 1.3.6.1.4.1.6247.4.5.1.3 | NodecdmipIgmpTransmiter | |||
| 1.3.6.1.4.1.6247.4.5.1.3.1 | ScalarcdmipIgmpRecognizeQueries | read-write | current | Modem as Client: Recognize IGMP Queries |
| 1.3.6.1.4.1.6247.4.5.1.3.2 | ScalarcdmipIgmpVersionUnsolicitedReports | read-write | current | Modem as Client: IGMP Version used for Unsolicited Reports. Possible values are: 1. Version 1. 2. Version 2. |
| 1.3.6.1.4.1.6247.4.5.1.3.3 | ScalarcdmipIgmpForceAlertOption | read-write | current | Modem as Client: Router Alert Option for V1 report. |
| 1.3.6.1.4.1.6247.4.5.1.3.4 | ScalarcdmipIgmpUnsolicitedReportInterval | read-write | current | Modem as Client: Unsolicited Report Interval in seconds. |
| 1.3.6.1.4.1.6247.4.5.2 | NodecdmipDhcpRelayConfig | |||
| 1.3.6.1.4.1.6247.4.5.2.1 | ScalarcdmipDhcpServerIpAddress | read-write | current | The IP address of the DHCP Server. |
| 1.3.6.1.4.1.6247.4.6 | NodecdmipRedundancy | |||
| 1.3.6.1.4.1.6247.4.6.1 | ScalarcdmipCurrentRedundantState | read-only | current | The redundancy state of the modem. 1. OnLine - actively passing IP traffic. 0. OffLine - in standby mode; no IP traffic. |
| 1.3.6.1.4.1.6247.4.6.2 | ScalarcdmipLocalUnitManagementIpAddress | read-only | current | The IP Address for management of the IP parameters (READ ONLY). *** NOTE: This address is the same as the Ethernet IP address. *** |
| 1.3.6.1.4.1.6247.4.6.3 | ScalarcdmipRedundantUnitManagementIpAddress | read-only | current | The IP Address of the redundant unit (READ ONLY). *** NOTE: This address is the same as other unit's Ethernet IP address. *** |
| 1.3.6.1.4.1.6247.4.6.4 | ScalarcdmipRedundantTrafficIpAddress | read-write | current | The IP address for traffic passing through the redundant pair of modem. This address is only active in the ONLINE modem. *** NOTE: The traffic IP can only be s… |
| 1.3.6.1.4.1.6247.4.6.5 | ScalarcdmipRedundantTrafficSubnetMaskLen | read-write | current | The subnet mask prefix length for the traffic IP address. *** NOTE: The traffic IP subnet mask can only be set on the ONLINE unit. *** |
| 1.3.6.1.4.1.6247.4.6.6 | ScalarcdmipForceUnitOffline | read-write | current | The allows the user to force a modem into standby mode. When a 'force' is executed the ONLINE unit goes to standby mode. Also, the OFFLINE unit now becomes act… |
| 1.3.6.1.4.1.6247.4.7 | NodecdmipOperMaint | |||
| 1.3.6.1.4.1.6247.4.7.1 | ScalarcdmipAppVersion | read-only | current | Displays the version information for the application image and FPGA images. |
| 1.3.6.1.4.1.6247.4.7.2 | ScalarcdmipSaveConfiguration | read-write | current | Setting this value to '1' will save the PARAM permanent storage. Only value: 1. Save - save the PARAM to permanent storage. |
| 1.3.6.1.4.1.6247.4.7.3 | ScalarcdmipReset | read-write | current | Setting this value to '1' will reboot the IP card. Only value: 1. Rest - reboot the IP card. |
| 1.3.6.1.4.1.6247.4.7.5 | ScalarcdmipRestoreFactoryDefaults | read-write | current | Setting this value to '1' will restore factory defaults to the system. Only value: 1. Restore - restore factory defaults. *** NOTE: Restoring factory defaults … |
| 1.3.6.1.4.1.6247.4.7.6 | ScalarcdmipLoadParamsFromStorage | read-write | current | Setting the value to '1' will load the PARAM from the permanent storage. Only value: 1. Load - load PARAM from permanent storage. |
| 1.3.6.1.4.1.6247.4.7.7 | ScalarcdmipIPModuleBootFrom | read-write | current | Setting this parameter lets the IP Module to boot from a specified image. 0. Latest - boots with the image that has the latest timestamp (date and time). 1. Im… |
| 1.3.6.1.4.1.6247.4.7.8 | ScalarcdmipUpgradeTo | read-write | current | Setting this parameter specifies Image to overwrite with the new upgraded image. 0. Oldest - Saves the new upgrade image over the image that has the oldest tim… |
| 1.3.6.1.4.1.6247.4.7.9 | ScalarcdmipParamConfig | read-write | current | Setting this parameter tells how the IP card will get its configuration data when booting up: Configuration data can be loaded from the following locations: 1.… |
| 1.3.6.1.4.1.6247.4.7.10 | NodecdmipUnitInformation | |||
| 1.3.6.1.4.1.6247.4.7.10.1 | ScalarcdmipBootImageInfo | read-only | current | Displays version information for bootrom image. |
| 1.3.6.1.4.1.6247.4.7.10.2 | ScalarcdmipAppImage1Info | read-only | current | Displays version information for application image in slot #1. |
| 1.3.6.1.4.1.6247.4.7.10.3 | ScalarcdmipAppImage2Info | read-only | current | Displays version information for application image in slot #2. |
| 1.3.6.1.4.1.6247.4.7.10.4 | ScalarcdmipFramerVersion | read-only | current | Displays version information for framer installed in the IP card. |
| 1.3.6.1.4.1.6247.4.7.11 | ScalarcdmipBaseModemBootFrom | read-write | current | Setting this parameter lets the Base Modem boot from a specified image. 0. Latest - boots with the Base Modem image that has the latest timestamp (date and tim… |
| 1.3.6.1.4.1.6247.4.8 | NodecdmipStatistics | |||
| 1.3.6.1.4.1.6247.4.8.1 | NodecdmipEthernetStatistics | |||
| 1.3.6.1.4.1.6247.4.8.1.1 | ScalarcdmipEtherTransmitGoodFrames | read-only | current | The number of transmitted good frames from the Ethernet interface. |
| 1.3.6.1.4.1.6247.4.8.1.2 | ScalarcdmipEtherTransmitMaxCollisionCount | read-only | current | The number of frames that were NOT transmitted because they encountered maximum configured collisions. This counter should only increment when network is heavi… |
| 1.3.6.1.4.1.6247.4.8.1.3 | ScalarcdmipEtherTransmitLateCollisionCount | read-only | current | The number of frames that were NOT transmitted because they encountered a collision outside the normal collision window. |
| 1.3.6.1.4.1.6247.4.8.1.4 | ScalarcdmipEtherTransmitDMAUnderrunCount | read-only | current | The number of frames that were either NOT transmitted OR retransmitted due to transmit DMA underrun. Underruns occur due to lack of PCI bandwidth resulting in … |
| 1.3.6.1.4.1.6247.4.8.1.5 | ScalarcdmipEtherTransmitLostCarrierSenseCount | read-only | current | The number of frames transmitted by the device despite the fact that it detected the de-assertion of Transmit Lost Carrier Sense (CRS) during the transmission. |
| 1.3.6.1.4.1.6247.4.8.1.6 | ScalarcdmipEtherTransmitDeferredCount | read-only | current | The number of frames deferred before transmission due to activity on the link. |
| 1.3.6.1.4.1.6247.4.8.1.7 | ScalarcdmipEtherTransmitSingleCollisionCount | read-only | current | The number of transmitted frames that encountered only one collision. |
| 1.3.6.1.4.1.6247.4.8.1.8 | ScalarcdmipEtherTransmitMultipleCollisionCount | read-only | current | The number of transmitted frames that encountered more than one collision. |
| 1.3.6.1.4.1.6247.4.8.1.9 | ScalarcdmipEtherTransmitTotalCollisionCount | read-only | current | This counter contains the total number of collisions that were encountered while attempting to transmit. This count includes late collisions and collisions fro… |
| 1.3.6.1.4.1.6247.4.8.1.10 | ScalarcdmipEtherReceiveGoodFrames | read-only | current | The number of frames properly received from the link. It is updated only after actual reception from the link is completed and all data bytes are stored in mem… |
| 1.3.6.1.4.1.6247.4.8.1.11 | ScalarcdmipEtherReceiveCRCErrorFrameCount | read-only | current | The number of aligned frames discarded due to a CRC error. |
| 1.3.6.1.4.1.6247.4.8.1.12 | ScalarcdmipEtherReceiveAllignErrorCount | read-only | current | The number of frames that are both misaligned [in other words, CRS de-asserts on a non-octet boundary] and contain a CRC error. |
| 1.3.6.1.4.1.6247.4.8.1.13 | ScalarcdmipEtherReceiveResourceErrorCount | read-only | current | The number of good frames discarded to unavailable resources. |
| 1.3.6.1.4.1.6247.4.8.1.14 | ScalarcdmipEtherReceiveFifoOverrunErrorCount | read-only | current | The number of frames known to be lost because the internal receive FIFO overflowed [also known as receive overrun]. This can occur if the device is unable to g… |
| 1.3.6.1.4.1.6247.4.8.1.15 | ScalarcdmipEtherReceiveCollisionDetectErrorCount | read-only | current | The number of frames that encountered a collision during reception. This counter is always zero on the 82559 Ethernet chip. |
| 1.3.6.1.4.1.6247.4.8.1.16 | ScalarcdmipEtherReceiveShortFrameCount | read-only | current | The number of received frames that are shorter than the minimum frame length. |
| 1.3.6.1.4.1.6247.4.8.1.17 | ScalarcdmipEtherTransmitFlowControlPauseFrames | read-only | current | The number of flow control frames transmitted by the device. This count includes both the XOFF and XON frames transmitted by the device. |
| 1.3.6.1.4.1.6247.4.8.1.18 | ScalarcdmipEtherReceiveFlowControlPauseFrames | read-only | current | The number of flow control frames received by the device. This count includes both XOFF and XON frames received. |
| 1.3.6.1.4.1.6247.4.8.1.19 | ScalarcdmipEtherResetCounters | read-write | current | Setting this parameter to '1' will reset all Ethernet transmit and receive counters. |
| 1.3.6.1.4.1.6247.4.8.3 | NodecdmipIpRoutingStatistics | |||
| 1.3.6.1.4.1.6247.4.8.3.1 | ScalarcdmipTotalIpPacketsFromSatellite | read-only | current | The total number of IP packets received from the Satellite interface. |
| 1.3.6.1.4.1.6247.4.8.3.2 | ScalarcdmipTotalIpPacketsRoutedToSatellite | read-only | current | The total number of IP packets sent to the Satellite interface. |
| 1.3.6.1.4.1.6247.4.8.3.3 | ScalarcdmipTotalIpPacketsFromEthernet | read-only | current | The total number of IP packets received from the Ethernet interface. |
| 1.3.6.1.4.1.6247.4.8.3.4 | ScalarcdmipTotalIpPacketsRoutedToEthernet | read-only | current | The total number of IP packets sent to the Ethernet interface. |
| 1.3.6.1.4.1.6247.4.8.3.10 | ScalarcdmipIgmpPacketsReceived | read-only | current | The total number of multicast IGMP packets received from any interface. |
| 1.3.6.1.4.1.6247.4.8.3.11 | ScalarcdmipIpOptionPacketsReceived | read-only | current | The total number of packets received with IP options in the header. |
| 1.3.6.1.4.1.6247.4.8.3.12 | ScalarcdmipDroppedPacketsTotal | read-only | current | The total number of packets dropped for any reason. |
| 1.3.6.1.4.1.6247.4.8.3.13 | ScalarcdmipDroppedPacketsTTLExpired | read-only | current | The total number of packets dropped because TTL (time to live) expired. |
| 1.3.6.1.4.1.6247.4.8.3.14 | ScalarcdmipDroppedPacketsBadIpHeader | read-only | current | The total number of packets dropped because of a bad IP header checksum. |
| 1.3.6.1.4.1.6247.4.8.3.15 | ScalarcdmipDroppedPacketsNoRoute | read-only | current | The total number of packets dropped because of no route. |
| 1.3.6.1.4.1.6247.4.8.3.16 | ScalarcdmipDroppedPacketsMulticast | read-only | current | The number of multicast packets dropped because of 'Satellite to Ethernet Option' is disabled. |
| 1.3.6.1.4.1.6247.4.8.3.17 | ScalarcdmipDroppedPacketsFiltered | read-only | current | The number of packets dropped because of a software decision. |
| 1.3.6.1.4.1.6247.4.8.3.18 | ScalarcdmipDroppedPacketsMulticastDisableGroup | read-only | current | The number of multicast packets dropped because the IGMP multicast group is disabled. |
| 1.3.6.1.4.1.6247.4.8.3.19 | ScalarcdmipDroppedPacketsNoArpEntry | read-only | current | The number of packets dropped because there is no ARP entry in the ARP table. |
| 1.3.6.1.4.1.6247.4.8.3.20 | ScalarcdmipDroppedPacketsBadBufferLength | read-only | current | The number of packets dropped because of a bad buffer length. |
| 1.3.6.1.4.1.6247.4.8.3.21 | ScalarcdmipDroppedPacketsBadIpVersion | read-only | current | The number of packets dropped because of an unsupported IP version (i.e. V6). |
| 1.3.6.1.4.1.6247.4.8.3.22 | ScalarcdmipDroppedPacketsQosFilterRule | read-only | current | The number of packets filtered because of the 'Filter' flag on a QoS rule. |
| 1.3.6.1.4.1.6247.4.8.3.23 | ScalarcdmipDroppedPacketsEasyConnectMulticastOption | read-only | current | The number of multicast packets dropped in EasyConnect mode because the Multicast Option is disabled. |
| 1.3.6.1.4.1.6247.4.8.3.24 | ScalarcdmipDroppedPacketsRouterQueueFull | read-only | current | The total number of packets dropped because router queue is full. |
| 1.3.6.1.4.1.6247.4.8.3.26 | ScalarcdmipResetCounters | read-write | current | Setting this parameter to '1' will clear all IP routing, WAN, and Ethernet statistics. |
| 1.3.6.1.4.1.6247.4.8.4 | NodecdmipQosStatistics | |||
| 1.3.6.1.4.1.6247.4.8.4.1 | TablecdmipQosStatisticsTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6247.4.8.4.1.1 | RowcdmipQosStatisticsEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6247.4.8.4.1.1.1 | ColumncdmipQosStatsQueueIndex | read-only | current | The index of the QoS rule for which stats are being displayed. |
| 1.3.6.1.4.1.6247.4.8.4.1.1.2 | ColumncdmipQosStatsSentPackets | read-only | current | The total number of packets sent through this QoS queue. |
| 1.3.6.1.4.1.6247.4.8.4.1.1.3 | ColumncdmipQosStatsSentPacketsPerSecond | read-only | current | The number of packets per second sent through this QoS queue. |
| 1.3.6.1.4.1.6247.4.8.4.1.1.4 | ColumncdmipQosStatsSentBytes | read-only | current | The total number of bytes sent through this QoS queue. |
| 1.3.6.1.4.1.6247.4.8.4.1.1.5 | ColumncdmipQosStatsDroppedPackets | read-only | current | The total number of packets dropped from this QoS queue. |
| 1.3.6.1.4.1.6247.4.8.4.1.1.6 | ColumncdmipQosStatsDroppedBytes | read-only | current | The total number of bytes dropped from this QoS queue. |
| 1.3.6.1.4.1.6247.4.8.4.1.1.7 | ColumncdmipQosStatsCurrentTxRate | read-only | current | The current Tx data rate associated with this QoS queue. |
| 1.3.6.1.4.1.6247.4.8.4.1.1.8 | ColumncdmipQosStatsAverageTxRate | read-only | current | The average Tx data rate associated with this QoS queue. |
| 1.3.6.1.4.1.6247.4.8.4.1.1.9 | ColumncdmipQosStatsMaxTxRate | read-only | current | The maximum Tx data rate associated with this QoS queue. |
| 1.3.6.1.4.1.6247.4.8.4.1.1.10 | ColumncdmipQosStatsActiveFlows | read-only | current | The number of active flows associated with this QoS queue. |
| 1.3.6.1.4.1.6247.4.8.4.1.1.11 | ColumncdmipQosStatsResetCounters | read-write | current | Setting this to '1' will reset all the statistics counters associated with this QoS queue. |
| 1.3.6.1.4.1.6247.4.8.5 | NodecdmipWanFpgaStatistics | |||
| 1.3.6.1.4.1.6247.4.8.5.1 | ScalarcdmipWanFpgaRxBadAddrCount | read-only | current | The number of received frames from the Satellite interface that do not match any of the HDLC addresses or the broadcast address. If 'frame bypass' is enabled, … |
| 1.3.6.1.4.1.6247.4.8.5.2 | ScalarcdmipWanFpgaRxPktProcessorCrcErrorCount | read-only | current | The number of received frames from the Satellite interface that failed the packet processor CRC check. |
| 1.3.6.1.4.1.6247.4.8.5.3 | ScalarcdmipWanFpgaRxAbortOctetErrorCount | read-only | current | The number of the aborted frames from the Satellite interface plus the number of octet error frames. An octet error is when the received frame does not start o… |
| 1.3.6.1.4.1.6247.4.8.5.4 | ScalarcdmipWanFpgaRxOverrunErrorCount | read-only | current | The number of received frames from the Satellite interface that exceeded a max. frame length of 2K bytes in length or overflowed the HDLC buffer. |
| 1.3.6.1.4.1.6247.4.8.5.5 | ScalarcdmipWanFpgaRxHdlcCrcErrorCount | read-only | current | The number of received frames from the Satellite interface that failed the HDLC CRC check. |
| 1.3.6.1.4.1.6247.4.8.5.6 | ScalarcdmipWanFpgaRxHdlcPayLoadCount | read-only | current | The count of payload bytes that were received over the Satellite interface, excluding any frame overhead. |
| 1.3.6.1.4.1.6247.4.8.5.7 | ScalarcdmipWanFpgaRxHdlcHeaderCount | read-only | current | The count of HDLC header bytes received over the Satellite interface, including control, HDLC address, Flow ID, and CRC. |
| 1.3.6.1.4.1.6247.4.8.5.8 | ScalarcdmipWanFpgaRxHdlcPacketCount | read-only | current | The number of frames received over the Satellite interface. |
| 1.3.6.1.4.1.6247.4.8.5.9 | ScalarcdmipWanFpgaTxHdlcHeaderCount | read-only | current | The number of HDLC header bytes transmitted over the Satellite interface. |
| 1.3.6.1.4.1.6247.4.8.5.10 | ScalarcdmipWanFpgaTxHdlcPayLoadCount | read-only | current | The number of payload bytes transmitted over the Satellite interface. |
| 1.3.6.1.4.1.6247.4.8.5.11 | ScalarcdmipWanFpgaTxHdlcPacketCount | read-only | current | The number of packets transmitted over the Satellite interface. |
| 1.3.6.1.4.1.6247.4.8.5.12 | ScalarcdmipWanFpgaResetAllCounters | read-write | current | Setting this variable to 'reset' will reset all the WAN FPGA Rx & Tx counters. |
| 1.3.6.1.4.1.6247.4.8.5.13 | ScalarcdmipWanFpgaWanUtilization | read-only | current | The percentage (%) of Tx bandwidth that is being utilized. |
| 1.3.6.1.4.1.6247.4.8.5.14 | ScalarcdmipWanFpgaLanToWanTraffic | read-only | current | The data rate (Kbps) before IP header and payload compression of Ethernet traffic destined for the Satellite interface. |
| 1.3.6.1.4.1.6247.4.8.5.15 | ScalarcdmipWanFpgaActualWanTraffic | read-only | current | The 'compressed' data rate (Kbps) after IP header and payload compression of traffic transmitted on the Satellite interface. |
| 1.3.6.1.4.1.6247.4.8.5.16 | ScalarcdmipWanFpgaWanBandwidthSaved | read-only | current | The percentage (%) of Satellite bandwidth saved because of IP header and payload compression. |
| 1.3.6.1.4.1.6247.4.8.6 | NodecdmipCompressionStatistics | |||
| 1.3.6.1.4.1.6247.4.8.6.1 | TablecdmipCompressionStatisticsTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6247.4.8.6.1.1 | RowcdmipCompressionStatisticsEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6247.4.8.6.1.1.1 | ColumncdmipHdrcompStatsQueueIndex | read-only | current | The index of the QoS queue for which the IP header compression stats are being displayed. |
| 1.3.6.1.4.1.6247.4.8.6.1.1.2 | ColumncdmipHdrcompStatsPreHdrcompBytes | read-only | current | The total number of bytes in all packets before IP header compression has been performed. |
| 1.3.6.1.4.1.6247.4.8.6.1.1.3 | ColumncdmipHdrcompStatsPostHdrcompBytes | read-only | current | The total number of bytes in all 'compressed' packets after IP header compression has been performed. |
| 1.3.6.1.4.1.6247.4.8.6.1.1.4 | ColumncdmipHdrcompRatio | read-only | current | The percentage (%) of saving gained by performing IP header compression on all packets destined for the Satellite interface. The percentage is then multiplied … |
| 1.3.6.1.4.1.6247.4.8.6.1.1.5 | ColumncdmipPayloadCompPrePayloadCompBytes | read-only | current | The total number of bytes in all packets before payload compression has been performed. To get the standard payload compression ratio in the form 1:x.xx (Pre P… |
| 1.3.6.1.4.1.6247.4.8.6.1.1.6 | ColumncdmipPayloadCompPostPayloadCompBytes | read-only | current | The total number of bytes in all packets after payload compression has been performed. To get the standard payload compression ratio in the form 1:x.xx (Pre Pa… |
| 1.3.6.1.4.1.6247.4.8.6.1.1.7 | ColumncdmipPayloadCompRatio | read-only | current | This parameter is the standard payload compression ratio. To get the standard payload compression ratio in the form 1:x.xx (Pre Payload Compression Bytes) x.xx… |
| 1.3.6.1.4.1.6247.4.8.6.1.1.8 | ColumncdmipCompStatsResetCounters | read-write | current | Setting this to '1' will reset all IP header compression and payload compression stats counters. |
| 1.3.6.1.4.1.6247.4.9 | NodecdmipQosRules | |||
| 1.3.6.1.4.1.6247.4.9.2 | TablecdmipQosRulesTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6247.4.9.2.1 | RowcdmipQosRulesEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6247.4.9.2.1.1 | ColumncdmipQosRulesIndex | read-write | current | The index for the QoS rule. The valid values are 1 - 32. |
| 1.3.6.1.4.1.6247.4.9.2.1.2 | ColumncdmipQosRulesSrcIpAddr | read-write | current | The source IP address for the QoS rule. |
| 1.3.6.1.4.1.6247.4.9.2.1.3 | ColumncdmipQosRulesSrcIpMaskLen | read-write | current | The source IP subnet mask length for the QoS rule. |
| 1.3.6.1.4.1.6247.4.9.2.1.4 | ColumncdmipQosRulesDstIpAddr | read-write | current | The destination IP address for the QoS rule. |
| 1.3.6.1.4.1.6247.4.9.2.1.5 | ColumncdmipQosRulesDstIpMaskLen | read-write | current | The destination IP subnet mask length for the QoS rule. |
| 1.3.6.1.4.1.6247.4.9.2.1.6 | ColumncdmipQosRulesProtocol | read-write | current | The protocol type for the QoS rule. Only the default rule is configured with 'All'. Setting protocol field to 'All' for other rules is not permitted, may resul… |
| 1.3.6.1.4.1.6247.4.9.2.1.7 | ColumncdmipQosRulesSrcPortMin | read-write | current | The starting UDP/TCP source port (minimum) for the QoS rule. A QoS rule can be configured with a port range of aaaa - bbbb by setting 'cdmipQosRulesSrcPortMin'… |
| 1.3.6.1.4.1.6247.4.9.2.1.8 | ColumncdmipQosRulesSrcPortMax | read-write | current | The ending UDP/TCP source port (maximum) for the QoS rule. A QoS rule can be configured with a port range of aaaa - bbbb by setting 'cdmipQosRulesSrcPortMin' t… |
| 1.3.6.1.4.1.6247.4.9.2.1.9 | ColumncdmipQosRulesDstPortMin | read-write | current | The starting destination port number (minimum) for the QoS rule. A QoS rule can be configured with a port range of xxxx - yyyy by setting 'cdmipQosRulesDstPort… |
| 1.3.6.1.4.1.6247.4.9.2.1.10 | ColumncdmipQosRulesDstPortMax | read-write | current | The ending destination port number (maximum) for the QoS rule. A QoS rule can be configured with a port range of xxxx - yyyy by setting 'cdmipQosRulesDstPortMi… |
| 1.3.6.1.4.1.6247.4.9.2.1.11 | ColumncdmipQosRulesMinBw | read-write | current | The minimum bandwidth (Kbps) for the QoS rule. *** NOTE: Only valid for 'Minimum Bandwidth & Maximum Bandwidth' mode. *** |
| 1.3.6.1.4.1.6247.4.9.2.1.12 | ColumncdmipQosRulesMaxBw | read-write | current | The maximum bandwidth (Kbps) for the QoS rule. *** NOTE: Valid for both 'Maximum Bandwidth & Priority' and 'Minimum Bandwidth & Maximum Bandwidth' modes. *** |
| 1.3.6.1.4.1.6247.4.9.2.1.13 | ColumncdmipQosRulesPriority | read-write | current | The priority for the QoS rule. The valid values are: Priority 1 - Highest Priority 2, 3, 4, 5, 6, 7 - Middle Priority 8 - Lowest *** NOTE: Only valid for 'Maxi… |
| 1.3.6.1.4.1.6247.4.9.2.1.14 | ColumncdmipQosRulesWred | read-write | current | The WRED (Weighted Random Early Drop) option for the QoS rule. This is the mechanism by which packets are treated upon queue full. If this is enabled, the pack… |
| 1.3.6.1.4.1.6247.4.9.2.1.15 | ColumncdmipQosRulesFilter | read-write | current | The filter option for the QoS rule. *** NOTE: This option will filter ALL packets associated with this QoS rule. *** |
| 1.3.6.1.4.1.6247.4.9.2.1.16 | ColumncdmipQosRulesRowStatus | read-write | current | In SMIv2 tables, the RowStatus textual convention is used to manage the creation and deletion of conceptual rows. This column has six defined values. active(1)… |
| 1.3.6.1.4.1.6247.4.9.3 | TablecdmipDiffServRulesTable | not-accessible | current | Differential Services (DiffServ) Rules Table. |
| 1.3.6.1.4.1.6247.4.9.3.1 | RowcdmipDiffServRulesEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6247.4.9.3.1.1 | ColumncdmipDiffServRulesIndex | read-write | current | The index for the DiffServ rule. |
| 1.3.6.1.4.1.6247.4.9.3.1.2 | ColumncdmipDiffServRulesClass | read-only | current | The DiffServ class name for the DiffServ rule. There are three types of DiffServ rules: 1. Expedite Forwarding 2. Class-1 to Class-8 3. Assured Forwarding-1 to… |
| 1.3.6.1.4.1.6247.4.9.3.1.3 | ColumncdmipDiffServRulesDscp | read-only | current | The DiffServ code point (DSCP) for the DiffServ rule. *** NOTE: This is NOT a user configurable parameter. *** |
| 1.3.6.1.4.1.6247.4.9.3.1.4 | ColumncdmipDiffServRulesMinBw | read-write | current | The minimum bandwidth (Kbps) for the DiffServ rule. *** NOTE: This value can only be set for DiffServ rules of 'Assured Forwarding Class'. NOTE: The total mini… |
| 1.3.6.1.4.1.6247.4.9.3.1.5 | ColumncdmipDiffServRulesMaxBw | read-write | current | The maximum bandwidth (Kbps) for the DiffServ rule. *** NOTE: This value can only be set for DiffServ rules of 'Assured Forwarding Class'. *** |
| 1.3.6.1.4.1.6247.4.9.3.1.6 | ColumncdmipDiffServRulesPriority | read-only | current | The priority of the DiffServ rule. *** NOTE: This is NOT a user configurable parameter. *** |
| 1.3.6.1.4.1.6247.4.9.3.1.9 | ColumncdmipDiffServRulesRowStatus | read-write | current | In SMIv2 tables, the RowStatus textual convention is used to manage the creation and deletion of conceptual rows. This column has six defined values. active(1)… |
| 1.3.6.1.4.1.6247.4.9.4 | ScalarcdmipQosMode | read-write | current | The QoS configuration modes for the QoS subsystem. The valid values are: 1. Maximum Bandwidth & Priority. 2. Minimum Bandwidth & Maximum Bandwidth. 3. Differen… |
| 1.3.6.1.4.1.6247.4.10 | NodecdmipControllerConformance | |||
| 1.3.6.1.4.1.6247.4.10.1 | NodecdmipControllerGroups | |||
| 1.3.6.1.4.1.6247.4.10.1.1 | GroupcdmipAdministrationGroup | current | CDM-IP Controller Administration Group. | |
| 1.3.6.1.4.1.6247.4.10.1.2 | GroupcdmipInterfacesGroup | current | CDM-IP Controller Interface Group. | |
| 1.3.6.1.4.1.6247.4.10.1.3 | GroupcdmipRouteTableGroup | current | CDM-IP Controller Route Table Group. | |
| 1.3.6.1.4.1.6247.4.10.1.4 | GroupcdmipProtocolsGroup | current | CDM-IP Controller Protocols Group. | |
| 1.3.6.1.4.1.6247.4.10.1.5 | GroupcdmipRedundancyGroup | current | CDM-IP Controller Redundancy Group. | |
| 1.3.6.1.4.1.6247.4.10.1.6 | GroupcdmipOperMaintGroup | current | CDM-IP Controller Oper. Maint. Group. | |
| 1.3.6.1.4.1.6247.4.10.1.7 | GroupcdmipStatisticsGroup | current | CDM-IP Controller Statistics Group. | |
| 1.3.6.1.4.1.6247.4.10.1.8 | GroupcdmipQosRulesGroup | current | CDM-IP Controller Qos Rules Group. | |
| 1.3.6.1.4.1.6247.4.10.2 | NodecdmipControllerCompliances | |||
| 1.3.6.1.4.1.6247.4.10.2.1 | CompliancecdmipControllerCompliance | current | CDM-IP Controller Compliance. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Availability | INTEGER { unavailable(0), available(1) } | ||
| EnableDisable | INTEGER { disable(0), enable(1) } |