MIB Viewer

CISCO-POP-MGMT-MIB

140 objects
Cisco Point Of Presence Management MIB to provide DSX1 and DSX0 facilities management and call summaries.
Imported Objects
CISCO-SMIciscoExperiment
DS1-MIBdsx1LineIndex dsx1LineStatus
IF-MIBInterfaceIndexOrZero
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDisplayString TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.10.19IdentityciscoPopMgmtMIBCisco Point Of Presence Management MIB to provide DSX1 and DSX0 facilities management and call summaries.
1.3.6.1.4.1.9.10.19.1NodeciscoPopMgmtMIBObjects
1.3.6.1.4.1.9.10.19.1.1NodecpmDS0Usage
1.3.6.1.4.1.9.10.19.1.1.1TablecpmDS0UsageTablenot-accessiblecurrentThe DS0 usage table is for hardware and software objects not used as interfaces, and not covered in rfc1213. These objects include analog calls coming over ISD…
1.3.6.1.4.1.9.10.19.1.1.1.1RowcpmDS0UsageEntrynot-accessiblecurrentAn entry in the DS0 Usage table.
1.3.6.1.4.1.9.10.19.1.1.1.1.1ColumncpmDS1SlotIndexnot-accessiblecurrentThe slot index indicates the slot number on the device where the DS1 card resides.
1.3.6.1.4.1.9.10.19.1.1.1.1.2ColumncpmDS1PortIndexnot-accessiblecurrentThe port index indicates the port number of a specific DS1 on the DS1 card in the slot
1.3.6.1.4.1.9.10.19.1.1.1.1.3ColumncpmChannelIndexnot-accessiblecurrentThe channel index that distinguishes the DS0 timeslot of the DS1 port. The range of the channel index is based on the number of T1/E1 channels: 1-24(T1) and 1-…
1.3.6.1.4.1.9.10.19.1.1.1.1.4ColumncpmConfiguredTyperead-onlycurrentThe configured technology for the channel: ISDN(2), Channelized T1 (3) or Channelized E1 (4).
1.3.6.1.4.1.9.10.19.1.1.1.1.5ColumncpmDS0CallTyperead-onlycurrentThe type of the current call carried by this DS0. idle - This DS0 is currently idle. unknown - The data type of the call currently occupying this DS0 is not on…
1.3.6.1.4.1.9.10.19.1.1.1.1.6ColumncpmL2Encapsulationread-onlycurrentThe data link encapsulation of the call currently occuppying this DS0: idle - This DS0 is currently idle. unknown - The encapsulation of the currently active c…
1.3.6.1.4.1.9.10.19.1.1.1.1.7ColumncpmCallCountread-onlycurrentThe number of calls that have occupied this DS0.
1.3.6.1.4.1.9.10.19.1.1.1.1.8ColumncpmTimeInUseread-onlycurrentThe amount of time that this DS0 has been in use. This is computed by summing up the call durations of all past calls that have occupied this DS0.
1.3.6.1.4.1.9.10.19.1.1.1.1.9ColumncpmInOctetsread-onlycurrentThe total number of octets received on this DS0 for data calls (cpmDS0CallType has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)'). All the re…
1.3.6.1.4.1.9.10.19.1.1.1.1.10ColumncpmOutOctetsread-onlycurrentThe total number of octets transmitted on this DS0 for data calls (cpmDS0CallType has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)'). All the…
1.3.6.1.4.1.9.10.19.1.1.1.1.11ColumncpmInPacketsread-onlycurrentThe total number of packets received on this DS0 for data calls (cpmDS0CallTyp has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)').
1.3.6.1.4.1.9.10.19.1.1.1.1.12ColumncpmOutPacketsread-onlycurrentThe total number of packets transmitted on this DS0 for data calls (cpmDS0CallTyp has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)').
1.3.6.1.4.1.9.10.19.1.1.1.1.13ColumncpmAssociatedInterfaceread-onlycurrentThis is the value of ifIndex when the specific channel has an active call with a corresponding interface in the ifTable. For example, a digital ISDN call has a…
1.3.6.1.4.1.9.10.19.1.1.2ScalarcpmISDNCfgBChanInUseForAnalogread-onlycurrentThe number of configured ISDN B-Channels that are currently occupied by analog calls.
1.3.6.1.4.1.9.10.19.1.1.3ScalarcpmISDNCfgBChannelsInUseread-onlycurrentThe number of configured ISDN B-Channels that are currently occupied by both Digital and Analog calls.
1.3.6.1.4.1.9.10.19.1.1.4ScalarcpmActiveDS0sread-onlycurrentThe number of DS0s that are currently in use.
1.3.6.1.4.1.9.10.19.1.1.5ScalarcpmPPPCallsread-onlycurrentThe current number of active PPP calls received by the managed device
1.3.6.1.4.1.9.10.19.1.1.6ScalarcpmV120Callsread-onlycurrentThe current number of active V.120 calls received by the managed device
1.3.6.1.4.1.9.10.19.1.1.7ScalarcpmV110Callsread-onlycurrentThe current number of active V.110 calls received by the managed device
1.3.6.1.4.1.9.10.19.1.1.8ScalarcpmActiveDS0sHighWaterMarkread-onlycurrentThe high water mark for number of DS0s that are active simultaneously
1.3.6.1.4.1.9.10.19.1.1.9TablecpmDS1DS0UsageTablenot-accessiblecurrentThe DS1-DS0-usage table is for hardware and software objects not used as interfaces, and not covered in rfc1213. These objects provide information on timeslots…
1.3.6.1.4.1.9.10.19.1.1.9.1RowcpmDS1DS0UsageEntrynot-accessiblecurrentAn entry in the DS0 Usage table.
1.3.6.1.4.1.9.10.19.1.1.9.1.1ColumncpmDS1UsageSlotIndexnot-accessiblecurrentThe slot index indicates the slot number on the device where the DS1 card resides. The slot index of the first slot is starting from 0 and increment by 1 for t…
1.3.6.1.4.1.9.10.19.1.1.9.1.2ColumncpmDS1UsagePortIndexnot-accessiblecurrentThe port index indicates the port number of a specific DS1 on the DS1 card in the slot. The port index of the first port is starting from 0 and increment by 1 …
1.3.6.1.4.1.9.10.19.1.1.9.1.3ColumncpmDS1ActiveDS0sread-onlycurrentThe number of DS0s that are currently in use for a particular DS1.
1.3.6.1.4.1.9.10.19.1.1.9.1.4ColumncpmDS1ActiveDS0sHighWaterMarkread-onlycurrentThe highest number of simultaneously actived DS0s on a specified DS1.
1.3.6.1.4.1.9.10.19.1.1.9.1.5ColumncpmDS1TotalAnalogCallsread-onlycurrentThe accumulated number of analog data calls (cpmDS0CallType has the value 'analog(3)') on all ds0s within this DS1 since system startup. The object includes ac…
1.3.6.1.4.1.9.10.19.1.1.9.1.6ColumncpmDS1TotalDigitalCallsread-onlycurrentThe accumulated number of digital data calls (cpmDS0CallType has the value 'digital(4)') on all ds0s within this DS1 since system startup. The object includes …
1.3.6.1.4.1.9.10.19.1.1.9.1.7ColumncpmDS1TotalV110Callsread-onlycurrentThe accumulated number of v.110 data calls (cpmDS0CallType has the value 'v110(5)') on all ds0s within this DS1 since system startup. The object includes activ…
1.3.6.1.4.1.9.10.19.1.1.9.1.8ColumncpmDS1TotalV120Callsread-onlycurrentThe accumulated number of v.120 data calls (cpmDS0CallType has the value 'v120(6)') on all ds0s within this DS1 since system startup. The object includes activ…
1.3.6.1.4.1.9.10.19.1.1.9.1.9ColumncpmDS1TotalCallsread-onlycurrentThe total number of calls on all the DS0s within this DS1 since last system re-initialization. The object includes active and terminated calls. This only inclu…
1.3.6.1.4.1.9.10.19.1.1.9.1.10ColumncpmDS1TotalTimeInUseread-onlycurrentThe total call duration on all the DS0s within this DS1 since last system re-initialization. This only includes DS0s configured as bearer channels, not those c…
1.3.6.1.4.1.9.10.19.1.1.9.1.11ColumncpmDS1CurrentIdleread-onlycurrentThe total number of DS0s currently in idle state within this DS1. This only includes DS0s configured as bearer and CAS channels, not those configured for signa…
1.3.6.1.4.1.9.10.19.1.1.9.1.12ColumncpmDS1CurrentOutOfServiceread-onlycurrentThe total number of DS0s in this DS1 currently placed out of service. This only includes DS0s configured as bearer and CAS channels, not those configured for s…
1.3.6.1.4.1.9.10.19.1.1.9.1.13ColumncpmDS1CurrentBusyoutread-onlycurrentThe total number of DS0s in this DS1 which currently have been requested to be busied out, but are not yet out of service. When an active call on a busied out …
1.3.6.1.4.1.9.10.19.1.1.9.1.14ColumncpmDS1InOctetsread-onlycurrentThe total number of octets received over all the DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpmInO…
1.3.6.1.4.1.9.10.19.1.1.9.1.15ColumncpmDS1OutOctetsread-onlycurrentThe total number of octets transmitted over all the DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpm…
1.3.6.1.4.1.9.10.19.1.1.9.1.16ColumncpmDS1InPacketsread-onlycurrentThe total number of data packets received over all the DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the …
1.3.6.1.4.1.9.10.19.1.1.9.1.17ColumncpmDS1OutPacketsread-onlycurrentThe total number of data packets transmitted over all the DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all t…
1.3.6.1.4.1.9.10.19.1.1.10ScalarcpmSW56CfgBChannelsInUseread-onlycurrentThe number of configured SW56 B-Channels that are currently occupied by Digital calls.
1.3.6.1.4.1.9.10.19.1.1.11ScalarcpmISDNCfgBChanInUseForVoiceread-onlycurrentThe number of configured ISDN B-Channels that are currently occupied by Voice calls.
1.3.6.1.4.1.9.10.19.1.1.12ScalarcpmCASCfgBChanInUseForVoiceread-onlycurrentThe number of configured CAS Channels that are currently occupied by Voice calls.
1.3.6.1.4.1.9.10.19.1.1.13ScalarcpmISDNCfgActiveDChannelsread-onlycurrentThe number of ISDN signaling channels which are active.
1.3.6.1.4.1.9.10.19.1.1.14ScalarcpmISDNCfgBChannelsTimeInUseread-onlycurrentThe total call duration on all the ISDN B-channels since last system re-initialization.
1.3.6.1.4.1.9.10.19.1.1.15ScalarcpmISDNCfgBChannelsTimeInUseAnlgread-onlycurrentThe total analog call duration on all the ISDN B-channels since last system re-initialization. Analog call type is identified in cpmDS0CallType.
1.3.6.1.4.1.9.10.19.1.1.16ScalarcpmISDNCfgBChannelCallsread-onlycurrentThe total number of calls on all the ISDN B-channels since last system re-initialization.
1.3.6.1.4.1.9.10.19.1.1.17ScalarcpmISDNCfgBChannelAnalogCallsread-onlycurrentThe total number of analog calls on all the ISDN B-channels since last system re-initialization. Analog call type is identified in cpmDS0CallType.
1.3.6.1.4.1.9.10.19.1.1.18ScalarcpmTotalISDNSyncPPPCallsread-onlycurrentThe total number of ISDN-sync PPP calls received by the managed device since last system re-initialization.
1.3.6.1.4.1.9.10.19.1.2NodecpmCallFailure
1.3.6.1.4.1.9.10.19.1.2.1ScalarcpmISDNCallsRejectedread-onlycurrentThe number of rejected ISDN calls in this managed device.
1.3.6.1.4.1.9.10.19.1.2.2ScalarcpmModemCallsRejectedread-onlycurrentThe number of rejected modem calls in this managed device.
1.3.6.1.4.1.9.10.19.1.2.3ScalarcpmISDNCallsClearedAbnormallyread-onlycurrentThe number of connected ISDN calls that have been abnormally cleared, that is, they were cleared by some event other than the following: a - The transmission o…
1.3.6.1.4.1.9.10.19.1.2.4ScalarcpmModemCallsClearedAbnormallyread-onlycurrentThe number of connected modem calls that have been abnormally cleared, that is, they were not cleared with the proper modem protocol handshakes.
1.3.6.1.4.1.9.10.19.1.2.5ScalarcpmISDNNoResourceread-onlycurrentThe number of ISDN calls that have been rejected because there is no B-Channel available to handle the call.
1.3.6.1.4.1.9.10.19.1.2.6ScalarcpmModemNoResourceread-onlycurrentThe number of modem calls that have been rejected because there is no modem available to handle the call.
1.3.6.1.4.1.9.10.19.1.3NodecpmActiveCallSummary
1.3.6.1.4.1.9.10.19.1.3.1TablecpmActiveCallSummaryTablenot-accessiblecurrentThe active call summary table is needed to track currently active calls. This table is needed because modem calls are not in CALL-HISTORY-MIB, and the DIAL-CON…
1.3.6.1.4.1.9.10.19.1.3.1.1RowcpmActiveCallSummaryEntrynot-accessiblecurrentAn entry in the Call Summary table.
1.3.6.1.4.1.9.10.19.1.3.1.1.1ColumncpmActiveCallStartTimeIndexnot-accessiblecurrentThe start time of the current call.
1.3.6.1.4.1.9.10.19.1.3.1.1.2ColumncpmActiveCallSummaryIndexnot-accessiblecurrentArbitrary small integer to distinguish calls that occured at the same time tick.
1.3.6.1.4.1.9.10.19.1.3.1.1.3ColumncpmActiveUserIDread-onlycurrentThe User login ID or zero length string if unavailable.
1.3.6.1.4.1.9.10.19.1.3.1.1.4ColumncpmActiveUserIpAddrread-onlycurrentThe IP address of the call or 0.0.0.0 if unavailable. This object comes directly from IOS.
1.3.6.1.4.1.9.10.19.1.3.1.1.5ColumncpmActiveCallTyperead-onlycurrentThe call type: unknown - None of the following analog - Modem call digital - Digital call v110 - V110 Call v120 - V120 Call voice - Voice Call
1.3.6.1.4.1.9.10.19.1.3.1.1.6ColumncpmActiveModemSlotread-onlycurrentIdentification of modem resource allocated to call. This is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmActiveModemPort unique…
1.3.6.1.4.1.9.10.19.1.3.1.1.7ColumncpmActiveModemPortread-onlycurrentIdentification of modem resource allocated to call. This is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmActiveModemSlot unique…
1.3.6.1.4.1.9.10.19.1.3.1.1.8ColumncpmActiveCallDurationread-onlycurrentThe duration of the current call.
1.3.6.1.4.1.9.10.19.1.3.1.1.9ColumncpmActiveEntrySlotread-onlycurrentThe logical slot in which the DS1 line that the user connected on resides.
1.3.6.1.4.1.9.10.19.1.3.1.1.10ColumncpmActiveEntryPortread-onlycurrentThe logical port for the DS1 line that the user connected on.
1.3.6.1.4.1.9.10.19.1.3.1.1.11ColumncpmActiveEntryChannelread-onlycurrentThe channel within the DS1 that is allocated to the call.
1.3.6.1.4.1.9.10.19.1.3.1.1.12ColumncpmActiveRemotePhoneNumberread-onlycurrentThe remote telephone number. For a call into the device, this is the originating number. For a call out of the device, this is the dialed number. If not availa…
1.3.6.1.4.1.9.10.19.1.3.1.1.13ColumncpmActiveLocalPhoneNumberread-onlycurrentThe local telephone number. For a call into the device, this is the dialed number. For a call out of the device, this is the originating number. If not availab…
1.3.6.1.4.1.9.10.19.1.3.1.1.14ColumncpmActiveTTYNumberread-onlycurrentThe TTY number associated with this call. This information comes from the IOS 'show line' command.
1.3.6.1.4.1.9.10.19.1.4NodecpmCallHistorySummary
1.3.6.1.4.1.9.10.19.1.4.1ScalarcpmCallHistorySummaryTableMaxLengthread-writecurrentThe upper limit on the number of entries that the cpmCallHistoryTable may contain. A value of 0 will prevent any history from being retained. When this table i…
1.3.6.1.4.1.9.10.19.1.4.2ScalarcpmCallHistorySummaryRetainTimerread-writecurrentThe minimum amount of time that an cpmCallHistoryEntry will be maintained before being deleted. A value of 0 will prevent any history from being retained, but …
1.3.6.1.4.1.9.10.19.1.4.3TablecpmCallHistorySummaryTablenot-accessiblecurrentThe call history summary table is needed to track ended active calls. This table is needed because modem calls are not in CALL-HISTORY-MIB; the CISCO-ISDN-MIB …
1.3.6.1.4.1.9.10.19.1.4.3.1RowcpmCallHistorySummaryEntrynot-accessiblecurrentAn entry in the Call Summary table.
1.3.6.1.4.1.9.10.19.1.4.3.1.1ColumncpmCallDisconnectTimeIndexnot-accessiblecurrentThe disconnect time of the call.
1.3.6.1.4.1.9.10.19.1.4.3.1.2ColumncpmCallStartTimeIndexnot-accessiblecurrentThe start time of the current call.
1.3.6.1.4.1.9.10.19.1.4.3.1.3ColumncpmCallHistorySummaryIndexnot-accessiblecurrentArbitrary small integer to distinguish calls that occured at the same time tick.
1.3.6.1.4.1.9.10.19.1.4.3.1.4ColumncpmUserIDread-onlycurrentThe User login ID or zero length string if unavailable. This object comes directly from IOS.
1.3.6.1.4.1.9.10.19.1.4.3.1.5ColumncpmUserIpAddrread-onlycurrentThe IP address of the call or 0.0.0.0 if unavailable. This object comes directly from IOS.
1.3.6.1.4.1.9.10.19.1.4.3.1.6ColumncpmCallTyperead-onlycurrentThe call type: unknown - None of the following analog - Modem call digital - Digital call v110 - V110 Call v120 - V120 Call voice - Voice Call
1.3.6.1.4.1.9.10.19.1.4.3.1.7ColumncpmModemSlotread-onlycurrentIdentification of modem resource allocated to call. This is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmModemPort uniquely ide…
1.3.6.1.4.1.9.10.19.1.4.3.1.8ColumncpmModemPortread-onlycurrentIdentification of modem resource allocated to call. This is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmModemSlot uniquely ide…
1.3.6.1.4.1.9.10.19.1.4.3.1.9ColumncpmCallDurationread-onlycurrentThe duration of the current call.
1.3.6.1.4.1.9.10.19.1.4.3.1.10ColumncpmEntrySlotread-onlycurrentThe physical system slot in which the DS1 line that the user connected on resides.
1.3.6.1.4.1.9.10.19.1.4.3.1.11ColumncpmEntryPortread-onlycurrentThe logical port for the DS1 line that the user connected on.
1.3.6.1.4.1.9.10.19.1.4.3.1.12ColumncpmEntryChannelread-onlycurrentThe channel within the DS1 that is allocated to the call.
1.3.6.1.4.1.9.10.19.1.4.3.1.13ColumncpmRemotePhoneNumberread-onlycurrentThe remote telephone number. For a call into the device, this is the originating number. For a call out of the device, this is the dialed number. If not availa…
1.3.6.1.4.1.9.10.19.1.4.3.1.14ColumncpmLocalPhoneNumberread-onlycurrentThe local telephone number. For a call into the device, this is the dialed number. For a call out of the device, this is the originating number. If not availab…
1.3.6.1.4.1.9.10.19.1.4.3.1.15ColumncpmTTYNumberread-onlycurrentThe TTY number associated with this call. This information comes from the IOS 'show line' command.
1.3.6.1.4.1.9.10.19.1.5NodecpmDS0Status
1.3.6.1.4.1.9.10.19.1.5.1ScalarcpmDS0BusyoutNotifyEnableread-writecurrentThis variable controls generation of cpmDS0BusyoutNotification. When this variable is 'true(1)', generation of cpmDS0BusyoutNotification is enabled. When this …
1.3.6.1.4.1.9.10.19.1.5.2TablecpmDS0StatusTablenot-accessiblecurrentThe DS0 Status Table provides additional DS0 level information and configuration. This table is an extension of the cpmDS0UsageTable.
1.3.6.1.4.1.9.10.19.1.5.2.1RowcpmDS0StatusEntrynot-accessiblecurrentStatus for an individual DS0. This entry AUGMENTS the cpmDS0UsageEntry. An entry exists for each configured DS0 in the system.
1.3.6.1.4.1.9.10.19.1.5.2.1.1ColumncpmDS0OperStatusread-onlycurrentThe operational state of the DSO. This object provides more detailed information than the IF-MIB ifOperStatus. unknown - The DSO is in an unknown state down - …
1.3.6.1.4.1.9.10.19.1.5.2.1.2ColumncpmDS0BusyoutAdminStatusread-writecurrentThe administratively requested busyout state of the DSO. This object represents the desired busyout state of the DS0, which may or may not be reflected in the …
1.3.6.1.4.1.9.10.19.1.5.2.1.3ColumncpmDS0BusyoutAllowread-onlycurrentThe object indicates if busyout requests for this DSO will be allowed. true - Setting cpmDS0BusyoutAdminStatus to busyout(2) or busyoutImmediate(3) will be acc…
1.3.6.1.4.1.9.10.19.1.5.2.1.4ColumncpmDS0BusyoutStatusread-onlycurrentThe busyout status of the DSO. noBusyout - The DS0 is not busied out nor has a busyout pending. busyoutPending - The DS0 has a busyout request pending. It will…
1.3.6.1.4.1.9.10.19.1.5.2.1.5ColumncpmDS0BusyoutSourceread-onlycurrentThe source of the busyout request either pending or active for the DSO. none - The DS0 is not busied out nor has a busyout request pending local - The DS0 is b…
1.3.6.1.4.1.9.10.19.1.5.2.1.6ColumncpmDS0BusyoutTimeread-onlycurrentValue of sysUpTime when the most recent busyout request was issued for this DS0. The value is zero indicates no busyout request has been issued.
1.3.6.1.4.1.9.10.19.1.5.2.1.7ColumncpmDS0ConfigFunctionread-onlycurrentThe object indicates the function this DSO is configured to provide. This object provides more detail than cpmConfiguredType. unknown - Unknown configuration t…
1.3.6.1.4.1.9.10.19.1.5.2.1.8ColumncpmDS0InterfaceIndexread-onlycurrentThis is the value of ifIndex in the ifTable for this DS0.
1.3.6.1.4.1.9.10.19.1.6NodecpmDS1LoopbackNotifyConfig
1.3.6.1.4.1.9.10.19.1.6.1ScalarcpmDS1LoopbackNotifyEnableread-writecurrentThis variable controls the generation of cpmDS1LoopbackNotification When this variable is 'true(1)', generation of these notification is enabled. When this var…
1.3.6.1.4.1.9.10.19.1.7NodecpmCallVolume
1.3.6.1.4.1.9.10.19.1.7.1ScalarcpmCallVolSuccISDNDigitalread-onlycurrentThe number of incoming and outgoing successful ISDN digital data calls (cpmDS0CallType has the value 'digital(4)'), since system startup. A successful call is …
1.3.6.1.4.1.9.10.19.1.7.2ScalarcpmCallVolAnalogCallClearedNormallyread-onlycurrentThe number of incoming and outgoing successful analog data calls which use modem resource (cpmDS0CallType has the value 'analog(3)'), since system startup. A s…
1.3.6.1.4.1.9.10.19.2NodecPopMgmtMIBNotificationPrefix
1.3.6.1.4.1.9.10.19.2.0NodecpmNotifications
1.3.6.1.4.1.9.10.19.2.0.1NotificationcpmDS0BusyoutNotificationcurrentThis notification is sent when there is a state change in cpmDS0BusyoutStatus object.
1.3.6.1.4.1.9.10.19.2.0.2NotificationcpmDS1LoopbackNotificationcurrentThis notification is sent when there is a state change in dsx1LineStatus object of RFC1406-MIB.
1.3.6.1.4.1.9.10.19.3NodecpmMIBConformance
1.3.6.1.4.1.9.10.19.3.1NodecpmMIBCompliances
1.3.6.1.4.1.9.10.19.3.1.1CompliancecpmMIBComplianceobsoleteThe compliance statement used in a PoPM Stack, which implement the Cisco PoP Management MIB
1.3.6.1.4.1.9.10.19.3.1.2CompliancecpmMIBComplianceRev1obsoleteThe compliance statement used in a PoPM Stack, which implement the Cisco PoP Management MIB
1.3.6.1.4.1.9.10.19.3.1.3CompliancecpmComplianceRev2obsoleteThe compliance statement used in a PoPM Stack, which implement the Cisco PoP Management MIB
1.3.6.1.4.1.9.10.19.3.1.4CompliancecpmMIBComplianceRev3deprecatedThe compliance statement used in a PoPM Stack, which implement the Cisco PoP Management MIB
1.3.6.1.4.1.9.10.19.3.1.5CompliancecpmMIBComplianceRev4deprecatedThe compliance statement used in a PoPM Stack, which implement the Cisco PoP Management MIB
1.3.6.1.4.1.9.10.19.3.1.6CompliancecpmMIBComplianceRev5currentThe compliance statement used in a PoPM Stack, which implement the Cisco PoP Management MIB
1.3.6.1.4.1.9.10.19.3.2NodecpmMIBGroups
1.3.6.1.4.1.9.10.19.3.2.1GroupcpmDS0UsageGroupobsoleteA collection of objects providing the analog and digital statistics for a DS1.
1.3.6.1.4.1.9.10.19.3.2.2GroupcpmCallFailureGroupcurrentA collection of objects providing aggregate totals of call failures
1.3.6.1.4.1.9.10.19.3.2.3GroupcpmActiveCallSummaryGroupcurrentA collection of objects providing the summary of the currently active calls.
1.3.6.1.4.1.9.10.19.3.2.4GroupcpmCallHistorySummaryGroupcurrentA collection of objects providing the summary of calls that were recently terminated.
1.3.6.1.4.1.9.10.19.3.2.5GroupcpmDS0UsageGroupRev1obsoleteA collection of objects providing the analog and digital statistics for a DS1.
1.3.6.1.4.1.9.10.19.3.2.6GroupcpmDS0UsageGroupRev2currentA collection of objects providing the analog and digital statistics for a DS1.
1.3.6.1.4.1.9.10.19.3.2.7GroupcpmDS1UsageGroupcurrentA collection of objects providing statistics aggregation across DS0s within a DS1.
1.3.6.1.4.1.9.10.19.3.2.8GroupcpmSystemGroupcurrentA collection of objects providing statistics aggregation for the entire system.
1.3.6.1.4.1.9.10.19.3.2.9GroupcpmDS0StatusGroupcurrentA collection of objects providing the status for a DS0.
1.3.6.1.4.1.9.10.19.3.2.10GroupcpmNotificationGroupdeprecatedThe collection of notifications
1.3.6.1.4.1.9.10.19.3.2.11GroupcpmDS1LoopbackNotifyConfigGroupcurrentA collection of objects providing the notification configuration
1.3.6.1.4.1.9.10.19.3.2.12GroupcpmCallVolumeGroupcurrentA collection of objects providing aggregate totals of call successfully completed
1.3.6.1.4.1.9.10.19.3.2.13GroupcpmNotificationGroupRev1currentThe collection of notifications
MIB Viewer