CISCO-WAN-BBIF-PORT-MIB
47 objects
The MIB module for configuration of ATM logical ports in PXM1 Service module in MGX82xx series. This MIB contains information on ATM Logical port statistics.
Imported Objects
| BASIS-MIB | bbIfCnf bbIfCnt bbIfStateGrp |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.6.1.1 | NodebbIfCnfPortGrp | |||
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1 | TablebbIfCnfPortGrpTable | not-accessible | current | The Broadband Interface config table is for logical interface. There will an entry for each of the logical partition of the physical line. |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1 | RowbbIfCnfPortGrpEntry | not-accessible | current | An entry for the logical interface. The interface may be further be configured to be used as a virtual trunk OR as a UNI Port. |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.1 | ColumnbbIfNum | read-only | current | This is logical interface number within a physical line num. In MGX PXM1 card, a physical port can have a maximum of 32 logical interfaces. |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.2 | ColumnbbIfRowStatus | read-write | current | This variable enables or disables the logical interface. 1 - enable 2 - disable 3 - modify |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.3 | ColumnbbIfAdmin | read-write | current | This variable enables or disables the logical interface. 1 - up 2 - down 3 - writeOnly |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.4 | ColumnbbIfLineNum | read-write | current | The line number associated with the logical interface. For PXM1, there is currently 4 physical lines. |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.5 | ColumnbbIfIngrPctBandwidth | read-write | current | The percentage of aggregate physical line bandwidth, available for this broadband interface - Ingress. Default is 0 %. |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.6 | ColumnbbIfEgrPctBandwidth | read-write | current | The percentage of aggregate physical line bandwidth, available for this broadband interface - Egress . Default is 0 %. |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.7 | ColumnbbIfMinVpi | read-write | current | The lower limit of VPI range to be reserved for this logical interface. |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.8 | ColumnbbIfMaxVpi | read-write | current | The upper limit of VPI range to be reserved for this logical interface. For virtual trunks, bbIfMinVpi and bbIfMaxVpi should be the same. |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.9 | ColumnbbIfSpeed | read-only | current | The speed of the port in cells per second. |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.10 | ColumnbbIfMaxCellRatePct | read-write | current | The maximum cell rate allowed for the port in terms of percentage. Must be greater than or equal to bbIfIngrPctBandwidth. The default is 100 percent. |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.2 | ScalarnextBbIfNumAvailable | read-only | current | Indicates the next logical broadband interface number that is available. |
| 1.3.6.1.4.1.351.110.5.2.6.3.1 | TablebbIfStateGrpTable | not-accessible | current | The state table for the logical interface. |
| 1.3.6.1.4.1.351.110.5.2.6.3.1.1 | RowbbIfStateGrpEntry | not-accessible | current | An entry for each logical interface representing the state. |
| 1.3.6.1.4.1.351.110.5.2.6.3.1.1.1 | ColumnbbStateIfNum | read-only | current | This is logical interface number within a physical line num. In MGX PXM1 card, a physical port can have a maximum of 32 logical interfaces. |
| 1.3.6.1.4.1.351.110.5.2.6.3.1.1.2 | ColumnbbIfState | read-only | current | This variable indicates the status of the logical interface. The following values are not supported for the logical interface. remoteloopback (3), outofcelldel… |
| 1.3.6.1.4.1.351.110.5.2.6.3.1.1.3 | ColumnbbIfOversubscribed | read-only | current | This variable indicates the whether the logical interface is over subscribed or not. |
| 1.3.6.1.4.1.351.110.5.2.6.3.1.1.4 | ColumnbbIfIngrPercentUtil | read-only | current | Percentage Utilization of the interface in the Ingress direction. |
| 1.3.6.1.4.1.351.110.5.2.6.3.1.1.5 | ColumnbbIfEgrPercentUtil | read-only | current | Percentage Utilization of the interface in the Egress direction. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1 | NodebbIfCntGrp | |||
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1 | TablebbIfCntGrpTable | not-accessible | current | The Broadband Interface Count table is for logical interface. There will an entry for each of the logical partition of the physical line. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1 | RowbbIfCntGrpEntry | not-accessible | current | An entry for logical interface. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.1 | ColumnbbCntIfNum | read-only | current | Refers to the logical interface index. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.2 | ColumnbbIfTotalCells | read-only | current | Total number of cells (VC plus Qbin) that belong to this Interface. This maps on to the virtual interface of QE. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.3 | ColumnbbIfRcvValidOAMCells | read-only | current | Total number of OAM cell received. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.4 | ColumnbbIfRcvRmCells | read-only | current | Total number of RM cells Received. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.5 | ColumnbbIfRcvClp0Cells | read-only | current | Total number of CLP-0 cells Received. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.6 | ColumnbbIfRcvClp1Cells | read-only | current | Total number of CLP-1 cells Received. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.7 | ColumnbbIfRcvClp0DiscCells | read-only | current | Total number of CLP-0 cells discarded at Ingress. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.8 | ColumnbbIfRcvClp1DiscCells | read-only | current | Total number of CLP-1 cells discarded at Ingress. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.9 | ColumnbbIfXmtOAMCells | read-only | current | Total number of OAM cells transmitted. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.10 | ColumnbbIfXmtRmCells | read-only | current | Total number of RM cells transmitted. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.11 | ColumnbbIfXmtClp0Cells | read-only | current | Total number of CLP-0 cells transmitted. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.12 | ColumnbbIfXmtClp1Cells | read-only | current | Total number of CLP-1 cells transmitted. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.13 | ColumnbbIfCntClrButton | read-write | current | Writing a value of 2 resets all the counters. |
| 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.14 | ColumnbbIfRcvErroredCells | read-only | current | Total number of cells with Invalid VPI VCI or Invalid PTI fields This is a card level counter and hence will be the same for all instances of the ports. |
| 1.3.6.1.4.1.351.150.32 | IdentityciscoWanBbifPortMIB | The MIB module for configuration of ATM logical ports in PXM1 Service module in MGX82xx series. This MIB contains information on ATM Logical port statistics. | ||
| 1.3.6.1.4.1.351.150.32.2 | NodecwbPortMIBConformance | |||
| 1.3.6.1.4.1.351.150.32.2.1 | NodecwbPortMIBGroups | |||
| 1.3.6.1.4.1.351.150.32.2.1.1 | GroupcwbPortGenearlGroup | current | The collection of objects which are applicable for general information about logical ports. | |
| 1.3.6.1.4.1.351.150.32.2.1.2 | GroupcwbPortConfGroup | current | The collection of objects which are used for configuring ATM logical ports(known as broad band interface ports). | |
| 1.3.6.1.4.1.351.150.32.2.1.3 | GroupcwbPortStateGroup | current | The collection of objects which are used for finding the state of ATM logical ports(known as broad band interface ports). | |
| 1.3.6.1.4.1.351.150.32.2.1.4 | GroupcwbPortStatsGroup | current | The collection of objects containing the statistics information for ATM Logical ports. | |
| 1.3.6.1.4.1.351.150.32.2.2 | NodecwbPortMIBCompliances | |||
| 1.3.6.1.4.1.351.150.32.2.2.1 | CompliancecwbPortCompliance | current | The compliance statement for objects related to SRM MIB. |