CODAN-MIB
408 objects
This is the MIB module for objects necessary to manage the Codan 8800 DMR device. Also NOTIFICATION-TYPEs (traps) are defined at the end of this document. Its position in the internet tree and its general structure are as follows: iso(1).org(3).dod(6).internet(1) : private(4) : enterprises(1) : codan(23304) : codanMibs(1) : minetMIB(1) : .......................................................... : : : : : : : : : : : wvStatusAndGauges(2) : wvTests(4) : wvConfiguration(1) wvPerformance(3) wvTraps(10) : :........................................................ : : : : : : : : : : wvLinkSettings(1) wvInterfaces(2) : wvManagement(3) wvRelayTable(4) : ....................................................... : : : : : : wvExternalInputTable(5) wvAlarmControl(6) wvComponentsRevisions(7) Note that in addition to the objects defined in this module, the Codan 8800 DMR supports the following objects from standard MIBs: MIB NAME GROUP OBJECT ======== ===== ====== MIB-II (RFC 1213) system sysName sysLocation sysContact sysObjectId sysDescr sysUpTime ipAddrTable ipAdEntAddr ipAdEntIfIndex ipAdEntNetMask Interfaces MIB (RFC 1573) interfaces ifNumber ifIndex ifDescr ifType ifMtu ifSpeed ifPhysAddress ifAdminStatus ifOperStatus ifLastChange ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProtos ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen ifSpecific snmpTraps linkUp linkDown DS1/E1 MIB (RFC 1406) dsx1ConfigTable dsx1LineIndex dsx1IfIndex dsx1LineType dsx1LineCoding dsx1LoopbackConfig dsx1TransmitClockSource dsx1LineStatus dsx1TimeElapsed dsx1CurrentESs dsx1CurrentSESs dsx1CurrentUASs dsx1CurrentDMs dsx1TotalESs dsx1TotalSESs dsx1TotalUASs dsx1TotalDMs DS3/E3 MIB (RFC 1407) dsx3ConfigTable dsx3LineIndex dsx3IfIndex dsx3LineCoding dsx3TransmitClockSource dsx3LineStatus dsx3CurrentUASs dsx3TotalUASs RS-232-like MIB (RFC 1659) rs232PortTable rs232PortIndex rs232PortInSpeed rs232PortOutSpeed rs232PortInFlowType rs232PortOutFlowType rs232PortType rs232AsyncPortTable rs232AsyncPortIndex rs232AsyncPortBits rs232AsyncPortStopBits rs232AsyncPortParity RFC 1907 snmpTraps authenticationFailure ETH-Like MIB (RFC 1643) dot3StatsTable dot3StatsIndex dot3StatsAlignmentErrors dot3StatsFCSErrors dot3StatsSingleCollisionFrames dot3StatsMultipleCollisionFrames dot3StatsSQETestErrors dot3StatsDeferredTransmissions dot3StatsLateCollisions dot3StatsExcessiveCollisions dot3StatsInternalMacTransmitErrors dot3StatsCarrierSenseErrors dot3StatsFrameTooLongs dot3StatsInternalMacReceiveErrors dot3StatsEtherChipSet NOTE: Codan 8800 DMR supports an STS-1 interface. For the purposes of this MIB, it behaves like E3/T3. Since it doesn't have a specific ifType, it's type will be 'other'.
Imported Objects
| CODAN-SMI | codanMibs |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DateAndTime DisplayString TestAndIncr TEXTUAL-CONVENTION TimeInterval |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23304.1.1 | IdentityminetMIB | This is the MIB module for objects necessary to manage the Codan 8800 DMR device. Also NOTIFICATION-TYPEs (traps) are defined at the end of this document. Its … | ||
| 1.3.6.1.4.1.23304.1.1.1 | NodewvConfiguration | |||
| 1.3.6.1.4.1.23304.1.1.1.1 | NodewvLinkSettings | |||
| 1.3.6.1.4.1.23304.1.1.1.1.1 | ScalarwvLinkId | read-write | current | Radio Link ID. The 2 terminals of the link must have the same linkId in order to communicate. This value should be encrypted when carried accross the network. |
| 1.3.6.1.4.1.23304.1.1.1.1.2 | ScalarwvLinkName | read-write | current | Radio Link Name. Limited to above size and [a-z, 0-9,-,*] because of the LCD. |
| 1.3.6.1.4.1.23304.1.1.1.1.3 | ScalarwvLinkRouteDescription | read-write | current | Radio Link Route. Limited to above size and [a-z, 0-9,-,*] because of the LCD. |
| 1.3.6.1.4.1.23304.1.1.1.1.4 | ScalarwvTxPowerSetting | read-write | current | The transmit power value set for this terminal, in 1dBm steps. |
| 1.3.6.1.4.1.23304.1.1.1.1.5 | ScalarwvChannelNo | read-write | current | The frequency channel to work on. Each channel corresponds to a given pair of transmit and receive frequencies, depending on the ODU's Standard (US/European), … |
| 1.3.6.1.4.1.23304.1.1.1.1.6 | ScalarwvLinkCapacity | read-write | current | Terminal Link chosen bit rate. Enables reduced capacity work for a given installed plug-in (according to wvInstalledPlugInPartNo). All subsets of a given plug-… |
| 1.3.6.1.4.1.23304.1.1.1.1.7 | ScalarwvTransmitterMute | read-write | current | When 'on', disables this terminal's transmission to the link. Note that disabling transmission sets off an alarm. |
| 1.3.6.1.4.1.23304.1.1.1.1.8 | ScalarwvReceiverMute | read-write | current | When 'on', disables this terminal's reception from the link. Since disabling reception is regarded as a kind of alarm, setting of this variable causes a trap. |
| 1.3.6.1.4.1.23304.1.1.1.1.9 | ScalarwvModulation | read-write | current | Sets the terminal radio modulation. Not all values apply to all models. |
| 1.3.6.1.4.1.23304.1.1.1.1.10 | ScalarwvForceAis | read-write | current | Defines whether to force Alarm Indication Signal (all 1's) on the link upon either occurence of a link BER Warning or BER Error alarm or unconditionally. |
| 1.3.6.1.4.1.23304.1.1.1.1.11 | ScalarwvFecEnabled | read-write | deprecated | Enables/disables the Forward Error Correction option. |
| 1.3.6.1.4.1.23304.1.1.1.1.12 | ScalarwvFecReceiveCorrection | read-write | current | Enables/disables Automatic Error Correction on receive. |
| 1.3.6.1.4.1.23304.1.1.1.1.13 | ScalarwvFecNoOfCorrectableBytes | read-write | current | Specifies the Forward Error Correction level on transmit. - for LAN plug-in the values are 10 or 20. - for PDH plug-in the values are read only. |
| 1.3.6.1.4.1.23304.1.1.1.1.14 | ScalarwvEth10-100ChannelSpacing | read-write | current | Specifies the allowed frequency spacing between adjacent channels for the ETH 10/100 plug-in, as a function of the ODU standard (American vs. European) and cho… |
| 1.3.6.1.4.1.23304.1.1.1.1.30 | ScalarwvAtpcControl | read-write | current | Enables/disables the ATPC feature. |
| 1.3.6.1.4.1.23304.1.1.1.1.31 | ScalarwvAtpcRslOptimalValue | read-write | current | Defines the targeted working RSL value, for ATPC. |
| 1.3.6.1.4.1.23304.1.1.1.1.32 | ScalarwvAtpcRslUpperThreshold | read-write | current | Defines the upper threshold for which, if the RSL value is greater than it for more than 10 seconds, the ATPC mechanism (if enabled) will decrease the remote T… |
| 1.3.6.1.4.1.23304.1.1.1.1.33 | ScalarwvAtpcRslLowerThreshold | read-write | current | Defines the lower threshold for which, if the RSL value is less than it for more than 10 seconds, the ATPC mechanism (if enabled) will increase the remote TX p… |
| 1.3.6.1.4.1.23304.1.1.1.1.34 | ScalarwvPauseTransmitterControl | read-write | current | Enables/disables the Pause Transmitter feature. |
| 1.3.6.1.4.1.23304.1.1.1.1.35 | ScalarwvPauseTransmitterTime | read-write | current | Defines the time in seconds to hold the pause for the transmitter in mute state. |
| 1.3.6.1.4.1.23304.1.1.1.1.36 | ScalarwvE1BNC75ohm | read-write | current | set E1 port to 75ohm. |
| 1.3.6.1.4.1.23304.1.1.1.1.37 | ScalarwvAtpcTimeOutControl | read-write | current | Enables/disables the ATPC TimeOut feature. |
| 1.3.6.1.4.1.23304.1.1.1.1.38 | ScalarwvAtpcTimeOutTimer | read-write | current | Atpc TimeOut timer feature. |
| 1.3.6.1.4.1.23304.1.1.1.1.39 | ScalarwvAtpcTimeOutAlarm | read-write | current | Enables/disables the ATPC TimeOut alarm. |
| 1.3.6.1.4.1.23304.1.1.1.1.40 | ScalarwvAtpcTimeOutAlarmLevel | read-write | current | declare the ATPC TimeOut alarm level. |
| 1.3.6.1.4.1.23304.1.1.1.1.41 | ScalarwvDisableAtpcInTimeOutAlarm | read-write | current | Disable the ATPC if TimeOut alarm in active. |
| 1.3.6.1.4.1.23304.1.1.1.1.42 | ScalarwvEnableSpaceDiversity | read-write | current | Enable the Space Diversity feature in 1+1 mode. |
| 1.3.6.1.4.1.23304.1.1.1.2 | NodewvInterfaces | |||
| 1.3.6.1.4.1.23304.1.1.1.2.1 | ScalarwvTributaryPortConnectionsMode | read-write | current | Defines the data ports connections mode. In Auto Sensing mode the system automatically detects which ports are connected. In Manual mode user choices are refle… |
| 1.3.6.1.4.1.23304.1.1.1.2.2 | TablewvTributaryPortTable | not-accessible | current | A table for private extensions to standard interface MIBs (like dsx1/dsx3). |
| 1.3.6.1.4.1.23304.1.1.1.2.2.1 | RowwvTributaryPortEntry | not-accessible | current | Entry in the wvTributaryPortTable. |
| 1.3.6.1.4.1.23304.1.1.1.2.2.1.1 | ColumnwvTributaryPortIfIndex | read-only | current | The value of this object is equal to the value of ifIndex for the corresponding interface on the Interfaces table of MIB-II. Note that the possible wvTributary… |
| 1.3.6.1.4.1.23304.1.1.1.2.2.1.2 | ColumnwvTributaryPortConnection | read-write | current | Determines if this port is connected or not. Note that the maximum number of connected ports is a subset of the available data ports (according to wvInstalledP… |
| 1.3.6.1.4.1.23304.1.1.1.2.2.1.3 | ColumnwvTributaryPortInvertedAlarm | read-write | current | Determines if this line has inverted alarm enabled. A line with inverted alarm enabled will report an alarm if either 'no LOS' or 'AIS' is detected (meaning th… |
| 1.3.6.1.4.1.23304.1.1.1.2.2.1.4 | ColumnwvTributaryPortName | read-write | current | Specifies the prefix string for Tributary Port. |
| 1.3.6.1.4.1.23304.1.1.1.2.3 | ScalarwvDsx3CableLengthRange | read-write | current | Defines the cable length range of the DS3/E3 line, for proper interface support. |
| 1.3.6.1.4.1.23304.1.1.1.2.4 | ScalarwvSlipConnection | read-write | current | Defines the type of SLIP connection to the IDU. ??? Couldn't this be self detectable ??? |
| 1.3.6.1.4.1.23304.1.1.1.2.5 | ScalarwvTelephoneNumber | read-write | current | Specifies the telephone number for dial-back purposes (e.g., for TFTP connection). |
| 1.3.6.1.4.1.23304.1.1.1.2.6 | ScalarwvDialPrefixString | read-write | current | Specifies the prefix string for modem dial up . |
| 1.3.6.1.4.1.23304.1.1.1.2.7 | ScalarwvInitString | read-write | current | Specifies the string to be sent to the modem for initialization . |
| 1.3.6.1.4.1.23304.1.1.1.2.20 | ScalarwvEth10-100SysCtrl | read-write | current | Specifies General ETH 10/100 Board controls. |
| 1.3.6.1.4.1.23304.1.1.1.2.21 | ScalarwvEth10-100SysAgingTime | read-write | current | Specifies ETH 10/100 Board Aging Time. Given value will be rounded down to highest multiple of 8. |
| 1.3.6.1.4.1.23304.1.1.1.2.22 | TablewvEth10-100PortTable | not-accessible | current | A table for ETH 10/100 ports. |
| 1.3.6.1.4.1.23304.1.1.1.2.22.1 | RowwvEth10-100PortEntry | not-accessible | current | Entry in the wvEth10-100PortTable. |
| 1.3.6.1.4.1.23304.1.1.1.2.22.1.1 | ColumnwvEth10-100PortIfIndex | read-only | current | The value of this object is equal to the value of ifIndex for the corresponding interface on the Interfaces table of MIB-II. Note that the possible wvEth10-100… |
| 1.3.6.1.4.1.23304.1.1.1.2.22.1.2 | ColumnwvEth10-100PortCtrl | read-write | current | Specifies specific ETH 10/100 Port controls. |
| 1.3.6.1.4.1.23304.1.1.1.2.22.1.3 | ColumnwvEth10-100PortStatus | read-only | current | Keeps the specific ETH 10/100 Port status. |
| 1.3.6.1.4.1.23304.1.1.1.2.22.1.4 | ColumnwvEth10-100PortClearStats | read-write | current | Setting of this object clears the specific ETH 10/100 port statistics. The value given with the object is not relevant and it's not checked. |
| 1.3.6.1.4.1.23304.1.1.1.2.22.1.5 | ColumnwvEth10-100PortThroughputCtrl | read-write | current | Specifies specific ETH 10/100 Port Throughput controls. |
| 1.3.6.1.4.1.23304.1.1.1.2.23 | ScalarwvEth10-100AvailCapacity | read-only | current | Shows the link capacity available for the ETH 10/100, after deducting the capacity used by the DS1s from the total available spectrum. |
| 1.3.6.1.4.1.23304.1.1.1.2.30 | TablewvRs232PortTable | not-accessible | current | A list of port entries. The number of entries is given by the value of rs232Number. |
| 1.3.6.1.4.1.23304.1.1.1.2.30.1 | RowwvRs232PortEntry | not-accessible | current | Status and parameter values for a port. |
| 1.3.6.1.4.1.23304.1.1.1.2.30.1.1 | ColumnwvRs232PortIndex | read-only | current | Same as original rs232PortIndex: The value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. T… |
| 1.3.6.1.4.1.23304.1.1.1.2.30.1.2 | ColumnwvRs232PortType | read-write | current | The port's hardware type. Same as original rs232PortType, but read-write and with restricted values. |
| 1.3.6.1.4.1.23304.1.1.1.2.30.1.3 | ColumnwvRs232PortSpeed | read-write | current | The port's input/output speed in bits per second. Note that non-standard values, such as 9612, are probably not allowed on most implementations. Same as origin… |
| 1.3.6.1.4.1.23304.1.1.1.2.30.1.4 | ColumnwvRs232PortFlowType | read-write | current | The port's type of input flow control. 'none' indicates no flow control at this level. Same as original rs232PortInFlowType and rs232PortOutFlowType, but with … |
| 1.3.6.1.4.1.23304.1.1.1.2.30.1.5 | ColumnwvRs232AsyncPortBits | read-write | current | The port's number of bits in a character. Same as original rs232AsyncPortBits, but with restricted values. |
| 1.3.6.1.4.1.23304.1.1.1.2.30.1.6 | ColumnwvRs232AsyncPortStopBits | read-write | current | The port's number of stop bits. Same as original rs232AsyncPortStopBits, but with restricted values. |
| 1.3.6.1.4.1.23304.1.1.1.2.30.1.7 | ColumnwvRs232AsyncPortParity | read-write | current | The port's sense of a character parity bit. Same as original rs232AsyncPortParity, but with restricted values. |
| 1.3.6.1.4.1.23304.1.1.1.3 | NodewvManagement | |||
| 1.3.6.1.4.1.23304.1.1.1.3.2 | ScalarwvUpdateTerminalConfiguration | read-write | current | Initializes a configuration update process from the manager to either the Active or one of the Saved Configurations on the terminal. The actual updated configu… |
| 1.3.6.1.4.1.23304.1.1.1.3.3 | ScalarwvActivateTerminalConfiguration | read-write | current | Initializes a configuration transfer process on the terminal from one of the Saved Configurations to the Active Configuration, according to wvActivateTerminalC… |
| 1.3.6.1.4.1.23304.1.1.1.3.4 | ScalarwvResetTerminal | read-write | current | Activates a cold/warm reset at the terminal. A cold reset is performed at both the IDU and the ODU and stops all communications with the device. A warm reset a… |
| 1.3.6.1.4.1.23304.1.1.1.3.5 | ScalarwvActivateTerminalConfigurationTime | read-write | current | Defines the time, relative to sysUpTime, when the wvActivateTerminalConfiguration request should be performed. If when set this value is 0 then the the activat… |
| 1.3.6.1.4.1.23304.1.1.1.3.6 | ScalarwvSavedActiveConfiguration | read-only | deprecated | Specifies which of the Saved Configurations currently reflects the Active Configuration. It is set to 'none' following a successful wvUpdateTerminalConfigurati… |
| 1.3.6.1.4.1.23304.1.1.1.3.7 | ScalarwvOnePlusOneRequestSwitchOut | read-write | current | For 1+1 systems only: Simulates a 'Switch-Out' request on the current unit. If not a 1+1 system, the request is rejected. The value given with the object is no… |
| 1.3.6.1.4.1.23304.1.1.1.3.10 | ScalarwvFrontPanelUserPassword | read-write | current | Specifies the Password for User privilege Front Panel access. |
| 1.3.6.1.4.1.23304.1.1.1.3.11 | ScalarwvFrontPanelAdminPassword | read-write | current | Specifies the Password for Admin privilege Front Panel access. |
| 1.3.6.1.4.1.23304.1.1.1.3.12 | ScalarwvFrontPanelSupervisorPassword | read-write | current | Specifies the Password for Supervisor privilege Front Panel access. |
| 1.3.6.1.4.1.23304.1.1.1.3.15 | ScalarwvResetOdu | read-write | current | Activates an ODU only cold reset. This will cause the link to be restarted. A cold switch-over reset, in addition to performing a cold reset, causes the ODU to… |
| 1.3.6.1.4.1.23304.1.1.1.3.20 | ScalarwvSlipInIPAddress | read-write | current | The terminals' Slip-In IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.21 | ScalarwvSlipInIPSubnetMask | read-write | current | The subnet mask associated with wvSlipInIPAddress. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. |
| 1.3.6.1.4.1.23304.1.1.1.3.22 | ScalarwvSlipOutIPAddress | read-write | current | The terminals' Slip-Out IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.23 | ScalarwvSlipOutIPSubnetMask | read-write | current | The subnet mask associated with wvSlipOutIPAddress. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. |
| 1.3.6.1.4.1.23304.1.1.1.3.24 | ScalarwvLanIPAddress | read-write | current | The terminals' LAN IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.25 | ScalarwvLanIPSubnetMask | read-write | current | The subnet mask associated with wvLanIPAddress. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. |
| 1.3.6.1.4.1.23304.1.1.1.3.26 | ScalarwvLinkIPAddress | read-write | current | The terminals' link IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.27 | ScalarwvLinkIPSubnetMask | read-write | current | The subnet mask associated with wvLinkIPAddress. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. |
| 1.3.6.1.4.1.23304.1.1.1.3.28 | ScalarwvEth10-100ManIPAddress | read-write | current | The terminals' ETH 10/100 IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.29 | ScalarwvEth10-100ManIPSubnetMask | read-write | current | The subnet mask associated with wvEth10-100ManIPAddress. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set t… |
| 1.3.6.1.4.1.23304.1.1.1.3.30 | ScalarwvPeerSlipInIPAddress | read-only | current | The peer terminals' Slip-In IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.31 | ScalarwvPeerSlipInIPSubnetMask | read-only | current | The subnet mask associated with wvPeerSlipInIPAddress. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to … |
| 1.3.6.1.4.1.23304.1.1.1.3.32 | ScalarwvPeerSlipOutIPAddress | read-only | current | The peer terminals' Slip-Out IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.33 | ScalarwvPeerSlipOutIPSubnetMask | read-only | current | The subnet mask associated with wvPeerSlipOutIPAddress. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to… |
| 1.3.6.1.4.1.23304.1.1.1.3.34 | ScalarwvPeerLanIPAddress | read-only | current | The peer terminals' LAN IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.35 | ScalarwvPeerLanIPSubnetMask | read-only | current | The subnet mask associated with wvPeerLanIPAddress. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. |
| 1.3.6.1.4.1.23304.1.1.1.3.36 | ScalarwvPeerLinkIPAddress | read-only | current | The peer terminals' link IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.37 | ScalarwvPeerLinkIPSubnetMask | read-only | current | The subnet mask associated with wvPeerLinkIPAddress. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. |
| 1.3.6.1.4.1.23304.1.1.1.3.38 | ScalarwvPeerEth10-100ManIPAddress | read-only | current | The peer terminals' ETH 10/100 IP address. |
| 1.3.6.1.4.1.23304.1.1.1.3.39 | ScalarwvPeerEth10-100ManIPSubnetMask | read-only | current | The subnet mask associated with wvPeerEth10-100ManIPAddress. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits s… |
| 1.3.6.1.4.1.23304.1.1.1.3.40 | ScalarwvSlipInDestIPAddress | read-write | current | The IP address of the destination connected to the Slip-In port. |
| 1.3.6.1.4.1.23304.1.1.1.3.41 | ScalarwvSlipInDestIPSubnetMask | read-write | deprecated | The subnet mask associated with wvSlipInDestIPAddress. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to … |
| 1.3.6.1.4.1.23304.1.1.1.3.42 | ScalarwvSlipOutDestIPAddress | read-write | current | The IP address of the destination connected to the Slip-Out port. |
| 1.3.6.1.4.1.23304.1.1.1.3.43 | ScalarwvSlipOutDestIPSubnetMask | read-write | deprecated | The subnet mask associated with wvSlipOutDestIPAddress. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to… |
| 1.3.6.1.4.1.23304.1.1.1.3.44 | ScalarwvOnePlusOneCompanionLinkIPAddress | read-only | current | The companion terminals' link IP address. VAlid only if system is a '1+1', according to wvOnePlusOneStatus. |
| 1.3.6.1.4.1.23304.1.1.1.3.45 | ScalarwvOnePlusOneCompanionEthIPAddress | read-write | current | The Companion Eth(LAN)IP address in '1+1' system. |
| 1.3.6.1.4.1.23304.1.1.1.3.50 | NodewvUserRoutesManagement | |||
| 1.3.6.1.4.1.23304.1.1.1.3.50.1 | TablewvUserRoutesTable | not-accessible | current | A table of the user defined static routes. |
| 1.3.6.1.4.1.23304.1.1.1.3.50.1.1 | RowwvUserRoutesEntry | not-accessible | current | Entry in the wvUserRoutesTable. The table has a variable size, limited to the range specified by wvUserRoutesIndex below. Deletion of a row is achieved by sett… |
| 1.3.6.1.4.1.23304.1.1.1.3.50.1.1.1 | ColumnwvUserRoutesIndex | read-only | current | The entry index. |
| 1.3.6.1.4.1.23304.1.1.1.3.50.1.1.2 | ColumnwvUserRoutesDest | read-write | current | The route destination. |
| 1.3.6.1.4.1.23304.1.1.1.3.50.1.1.3 | ColumnwvUserRoutesHop | read-write | current | The route hop. |
| 1.3.6.1.4.1.23304.1.1.1.3.50.1.1.4 | ColumnwvUserRoutesMask | read-write | current | The route mask. |
| 1.3.6.1.4.1.23304.1.1.1.3.50.1.1.5 | ColumnwvUserRoutesIf | read-write | current | Set requested interface for the route . |
| 1.3.6.1.4.1.23304.1.1.1.3.50.1.1.6 | ColumnwvUserRoutesType | read-write | current | Set for route deleting . |
| 1.3.6.1.4.1.23304.1.1.1.3.50.2 | ScalarwvUserRoutesCount | read-only | current | The number of entries in User Routes Table. |
| 1.3.6.1.4.1.23304.1.1.1.3.100 | ScalarwvSetOperationId | read-write | current | This object identifies the current successful invocation of the set operation. |
| 1.3.6.1.4.1.23304.1.1.1.3.101 | ScalarwvSetOperationCtrl | read-write | current | This object synchronizes between several cooperating manager stations, to coordinate their use of the set operation. If it is set to 'setDisabled' no SNMP set … |
| 1.3.6.1.4.1.23304.1.1.1.3.102 | ScalarwvSetOperationOwner | read-write | current | The entity which currently has the 'ownership' required to perform set operations. |
| 1.3.6.1.4.1.23304.1.1.1.3.103 | ScalarwvConfigurationChangedStatus | read-write | deprecated | A bit is set for a family by the agent to indicate that a configuration parameter in the corresponding family has been changed. It is the manager's responsibil… |
| 1.3.6.1.4.1.23304.1.1.1.3.110 | TablewvCommunityTable | not-accessible | current | A table of SNMP community settings. |
| 1.3.6.1.4.1.23304.1.1.1.3.110.1 | RowwvCommunityEntry | not-accessible | current | Entry in the wvCommunityTable. The table has a variable size, limited to the range specified by wvCommunityId below. Deletion of a row is achieved by setting w… |
| 1.3.6.1.4.1.23304.1.1.1.3.110.1.1 | ColumnwvCommunityId | read-only | current | The entry index. |
| 1.3.6.1.4.1.23304.1.1.1.3.110.1.2 | ColumnwvCommunityName | read-write | current | The name of the community. |
| 1.3.6.1.4.1.23304.1.1.1.3.110.1.3 | ColumnwvCommunityPrivilege | read-write | current | Sets the privilege of the community which name is given by wvCommunityName . |
| 1.3.6.1.4.1.23304.1.1.1.3.111 | TablewvTrapRecipientsTable | not-accessible | current | A table of SNMP trap managers IP addresses. |
| 1.3.6.1.4.1.23304.1.1.1.3.111.1 | RowwvTrapRecipientsEntry | not-accessible | current | Entry in the wvTrapRecipientsTable. The table has a variable size, limited to the range specified by wvTrapRecipientsId below. Deletion of a row is achieved by… |
| 1.3.6.1.4.1.23304.1.1.1.3.111.1.1 | ColumnwvTrapRecipientsId | read-only | current | The entry index. |
| 1.3.6.1.4.1.23304.1.1.1.3.111.1.2 | ColumnwvTrapRecipientsIp | read-write | current | The IP Address of the manager to receive the trap. |
| 1.3.6.1.4.1.23304.1.1.1.3.200 | ScalarwvTftpServerIpAddress | read-write | current | Defines the IP Address of the TFTP server. |
| 1.3.6.1.4.1.23304.1.1.1.3.201 | ScalarwvTftpOperationCtrl | read-write | current | When disabled no TFTP can be performed. This allows a high privilege authority to disallow lower privilege managers to initialize TFTP from this terminal. Note… |
| 1.3.6.1.4.1.23304.1.1.1.3.202 | ScalarwvTftpNoOfRetries | read-write | current | Determines the no. of retries to be performed by the terminal upon TFTP failures. A value of 0 means to try forever until successful or deliberately stopped. |
| 1.3.6.1.4.1.23304.1.1.1.3.203 | ScalarwvTftpFileName | read-write | current | Defines the full name of the file to be TFTP'ed. |
| 1.3.6.1.4.1.23304.1.1.1.3.204 | ScalarwvTftpStartTime | read-write | current | Defines the desired delay time, in time-ticks, before the TFTP is started. When TFTP is on, either on delay or started, setting wvTftpStartTime to 0 forces a p… |
| 1.3.6.1.4.1.23304.1.1.1.3.205 | ScalarwvTftpRemainingStartTime | read-only | current | Defines the ongoing remaining time before the TFTP starts. |
| 1.3.6.1.4.1.23304.1.1.1.3.210 | TablewvSwModuleTable | not-accessible | current | The Terminal Software Modules table. |
| 1.3.6.1.4.1.23304.1.1.1.3.210.1 | RowwvSwModuleEntry | not-accessible | current | Entry in the wvSwModuleTable. |
| 1.3.6.1.4.1.23304.1.1.1.3.210.1.1 | ColumnwvSwModuleIndex | read-only | current | An index to the Software Modules Table. |
| 1.3.6.1.4.1.23304.1.1.1.3.210.1.2 | ColumnwvSwModuleName | read-only | current | The software module name. For example: Kernel, Agent. |
| 1.3.6.1.4.1.23304.1.1.1.3.210.1.3 | ColumnwvSwModuleActiveRev | read-only | current | The module active software revision. This string will have a zero length if the revision is unknown. |
| 1.3.6.1.4.1.23304.1.1.1.3.210.1.4 | ColumnwvSwModuleActiveCS | read-only | current | The module active software check-sum. |
| 1.3.6.1.4.1.23304.1.1.1.3.210.1.5 | ColumnwvSwModuleStandByRev | read-only | current | The module stand-by software revision. This string will have a zero length if the revision is unknown. |
| 1.3.6.1.4.1.23304.1.1.1.3.210.1.6 | ColumnwvSwModuleStandByCS | read-only | current | The module stand-by software check-sum. |
| 1.3.6.1.4.1.23304.1.1.1.3.215 | ScalarwvResetPerformance | read-write | current | When setting to 'on' it will Reset the Performance parameters. Reading this object will return allways 'off'. |
| 1.3.6.1.4.1.23304.1.1.1.4 | NodewvRelays | |||
| 1.3.6.1.4.1.23304.1.1.1.4.1 | TablewvRelayTable | not-accessible | current | A table of relays settings. There are 7 entries in the table: 5 actual relays, a buzzer as 6th entry and a general purpose external TTL output as 7th entry. |
| 1.3.6.1.4.1.23304.1.1.1.4.1.1 | RowwvRelayEntry | not-accessible | current | Entry in the wvRelayTable. |
| 1.3.6.1.4.1.23304.1.1.1.4.1.1.1 | ColumnwvRelayId | read-only | current | The entry index. |
| 1.3.6.1.4.1.23304.1.1.1.4.1.1.2 | ColumnwvRelayOperation | read-write | current | Enables/disables given relay. |
| 1.3.6.1.4.1.23304.1.1.1.4.1.1.3 | ColumnwvRelayNormalState | read-write | current | Defines the normal state of the relay or TTL out. Buzzer normal state is always off, and can not be chosen. |
| 1.3.6.1.4.1.23304.1.1.1.4.1.1.4 | ColumnwvRelayActivate | read-write | current | Manually activates the relay. |
| 1.3.6.1.4.1.23304.1.1.1.4.1.1.5 | ColumnwvRelayToLocalAlarmMapping | read-write | current | Bits in the list set to on will cause the given relay to be activated when any of the corresponding local alarms occur. |
| 1.3.6.1.4.1.23304.1.1.1.4.1.1.6 | ColumnwvRelayToRemoteAlarmMapping | read-write | current | Bits in the list set to on will cause the given relay to be activated when any of the corresponding remote alarms occur. |
| 1.3.6.1.4.1.23304.1.1.1.4.1.1.7 | ColumnwvRelayStatus | read-only | current | Describes the current state of the given relay. |
| 1.3.6.1.4.1.23304.1.1.1.5 | NodewvExternalInputs | |||
| 1.3.6.1.4.1.23304.1.1.1.5.1 | TablewvExternalInputTable | not-accessible | current | A table of external inputs settings. |
| 1.3.6.1.4.1.23304.1.1.1.5.1.1 | RowwvExternalInputEntry | not-accessible | current | Entry in the wvExternalInputTable. |
| 1.3.6.1.4.1.23304.1.1.1.5.1.1.1 | ColumnwvExternalInputId | read-only | current | The entry index. |
| 1.3.6.1.4.1.23304.1.1.1.5.1.1.2 | ColumnwvExternalInputSetting | read-write | current | Enables/disables given external input. |
| 1.3.6.1.4.1.23304.1.1.1.5.1.1.3 | ColumnwvExternalInputSense | read-write | current | Sets the sense on which the input alarm is defined as active. |
| 1.3.6.1.4.1.23304.1.1.1.5.1.1.4 | ColumnwvExternalInputAlarmSeverity | read-write | current | Defines the alarm severity of given input. |
| 1.3.6.1.4.1.23304.1.1.1.5.1.1.5 | ColumnwvExternalInputStatus | read-only | current | Describes the current state of the given input. |
| 1.3.6.1.4.1.23304.1.1.1.6 | NodewvAlarmControl | |||
| 1.3.6.1.4.1.23304.1.1.1.6.1 | ScalarwvAlarmsReportToNMSCtrl | read-write | current | Defines the severity level of the alarms to be asynchronoulsy reported by the agent to the managers specified in the wvTrapRecepientsIpTable. |
| 1.3.6.1.4.1.23304.1.1.1.6.2 | ScalarwvAlarmsReportToLCDCtrl | read-write | current | Defines the severity level of the alarms to be displayed at the front panel LCD. |
| 1.3.6.1.4.1.23304.1.1.1.6.3 | ScalarwvNoOfAlertsOnLCD | read-write | current | Limits the number of alarms to be displayed at the front panel LCD. |
| 1.3.6.1.4.1.23304.1.1.1.6.4 | ScalarwvLinkBERWarningThresholdHigh | read-write | current | Defines the high water mark above which the terminal enters the link BER warning alarm state. If wvLinkxxxBER in a given wvLinkThresholdMeasurementInterval get… |
| 1.3.6.1.4.1.23304.1.1.1.6.5 | ScalarwvLinkBERWarningThresholdLow | read-write | current | Defines the low water mark below which the terminal exits the link BER warning alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.6 | ScalarwvLinkBERErrorThresholdHigh | read-write | current | Defines the high water mark above which the terminal enters the link BER error alarm state. If wvxxxlinkBER in a given wvLinkThresholdMeasurementInterval gets … |
| 1.3.6.1.4.1.23304.1.1.1.6.7 | ScalarwvLinkBERErrorThresholdLow | read-write | current | Defines the low water mark below which the terminal exits the link BER error alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.8 | ScalarwvLinkBLERAlarmThresholdHigh | read-write | current | Defines the high water mark above which the terminal enters the link Blocks Error Rate alarm state. If wvLinkxxxBLER in a given wvLinkThresholdMeasurementInter… |
| 1.3.6.1.4.1.23304.1.1.1.6.9 | ScalarwvLinkBLERAlarmThresholdLow | read-write | current | Defines the low water mark below which the terminal exits the link Blocks Error Rate alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.10 | ScalarwvLinkBBERAlarmThresholdHigh | read-write | current | Defines the high water mark above which the terminal enters the link Blocks Background Error Rate alarm state. If wvLinkxxxBBER in a given wvLinkThresholdMeasu… |
| 1.3.6.1.4.1.23304.1.1.1.6.11 | ScalarwvLinkBBERAlarmThresholdLow | read-write | current | Defines the low water mark below which the terminal exits the link Blocks Error Rate alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.12 | ScalarwvLinkNCBLERAlarmThresholdHigh | read-write | current | Defines the high water mark above which the terminal enters the link Not Corrected Blocks Error Rate alarm state. If wvLinkxxxNCBLER in a given wvLinkThreshold… |
| 1.3.6.1.4.1.23304.1.1.1.6.13 | ScalarwvLinkNCBLERAlarmThresholdLow | read-write | current | Defines the low water mark below which the terminal exits the link Not Corrected Blocks Error Rate alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.14 | ScalarwvLinkESAlarmThresholdHigh | read-write | current | Defines the high water mark above which the terminal enters the link Errored Seconds alarm state. If wvLinkxxxESs in a given wvLinkThresholdMeasurementInterval… |
| 1.3.6.1.4.1.23304.1.1.1.6.15 | ScalarwvLinkESAlarmThresholdLow | read-write | current | Defines the low water mark below which the terminal exits the link Errored Seconds alarm state. The value is expressed as a percentage x 100 of the elapsed tim… |
| 1.3.6.1.4.1.23304.1.1.1.6.16 | ScalarwvLinkSESAlarmThresholdHigh | read-write | current | Defines the high water mark above which the terminal enters the link Severely Errored Seconds alarm state. If wvLinkxxxSESs in a given wvLinkThresholdMeasureme… |
| 1.3.6.1.4.1.23304.1.1.1.6.17 | ScalarwvLinkSESAlarmThresholdLow | read-write | current | Defines the low water mark below which the terminal exits the link Severely Errored Seconds alarm state. The value is expressed as a percentage x 100 of the el… |
| 1.3.6.1.4.1.23304.1.1.1.6.18 | ScalarwvLinkDMAlarmThresholdHigh | read-write | current | Defines the high water mark above which the terminal enters the link Degraded Minutes alarm state. If wvLinkxxxDMs in a given wvLinkThresholdMeasurementInterva… |
| 1.3.6.1.4.1.23304.1.1.1.6.19 | ScalarwvLinkDMAlarmThresholdLow | read-write | current | Defines the low water mark below which the terminal exits the link Degraded Minutes alarm state. The value is expressed as a percentage x 100 of the elapsed ti… |
| 1.3.6.1.4.1.23304.1.1.1.6.20 | ScalarwvLinkUASAlarmThresholdHigh | read-write | current | Defines the high water mark above which the terminal enters the link Unavailable Seconds alarm state. If wvLinkxxxUASs in a given wvLinkThresholdMeasurementInt… |
| 1.3.6.1.4.1.23304.1.1.1.6.21 | ScalarwvLinkUASAlarmThresholdLow | read-write | current | Defines the low water mark below which the terminal exits the link Unavailable Seconds alarm state. The value is expressed as a percentage x 100 of the elapsed… |
| 1.3.6.1.4.1.23304.1.1.1.6.22 | ScalarwvlinkRSLLowAlarmThresholdhHigh | read-write | current | Defines the high water mark above which the terminal enters the link rslLow alarm state. If wvLinkxxxRSL in a given wvLinkThresholdMeasurementInterval gets abo… |
| 1.3.6.1.4.1.23304.1.1.1.6.23 | ScalarwvlinkRSLLowAlarmThresholdhLow | read-write | current | Defines the low water mark below which the terminal exits the link rslLow alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.24 | ScalarwvlinkAverageRSLLowAlarmThresholdhHigh | read-write | current | Defines the high water mark above which the terminal enters the link averageRSLLow alarm state. If wvLinkxxxAverageRSL in a given wvLinkThresholdMeasurementInt… |
| 1.3.6.1.4.1.23304.1.1.1.6.25 | ScalarwvlinkAverageRSLLowAlarmThresholdhLow | read-write | current | Defines the low water mark below which the terminal exits the link averageRSLLow alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.26 | ScalarwvLinkThresholdMeasurementInterval | read-write | current | Defines the periodical interval against which the link performance alarm thresholds are to be checked. A value of zero means no link performance alarms should … |
| 1.3.6.1.4.1.23304.1.1.1.6.50 | ScalarwvEth10-100CSLAlarmThresholdhHigh | read-write | current | Defines the high water mark above which the terminal enters the ETH 10/100 Carrier Sense Lost alarm state. If dot3StatsCarrierSenseErrors for any ETH 10-100 po… |
| 1.3.6.1.4.1.23304.1.1.1.6.51 | ScalarwvEth10-100CSLAlarmThresholdhLow | read-write | current | Defines the low water mark below which the terminal exits the ETH 10/100 Carrier Sense Lost alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.52 | ScalarwvEth10-100ECAlarmThresholdhHigh | read-write | current | Defines the high water mark above which the terminal enters the ETH 10/100 Excessive Collisions alarm state. If dot3StatsExcessiveCollisions for any ETH 10-100… |
| 1.3.6.1.4.1.23304.1.1.1.6.53 | ScalarwvEth10-100ECAlarmThresholdhLow | read-write | current | Defines the low water mark below which the terminal exits the ETH 10/100 Excessive Collisions alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.54 | ScalarwvEth10-100IMTEAlarmThresholdhHigh | read-write | current | Defines the high water mark above which the terminal enters the ETH 10/100 Internal MAC Transmit Errors alarm state. If dot3StatsInternalMacTransmitErrors for … |
| 1.3.6.1.4.1.23304.1.1.1.6.55 | ScalarwvEth10-100IMTEAlarmThresholdhLow | read-write | current | Defines the low water mark below which the terminal exits the ETH 10/100 Internal MAC Transmit Errors alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.56 | ScalarwvEth10-100IMREAlarmThresholdhHigh | read-write | current | Defines the high water mark above which the terminal enters the ETH 10/100 Internal MAC Receive Errors alarm state. If dot3StatsInternalMacReceiveErrors for an… |
| 1.3.6.1.4.1.23304.1.1.1.6.57 | ScalarwvEth10-100IMREAlarmThresholdhLow | read-write | current | Defines the low water mark below which the terminal exits the ETH 10/100 Internal MAC Receive Errors alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.58 | ScalarwvEth10-100TxLinkUsageAlarmThresholdLow | read-write | current | Low threshold of the actual no. of bits being transmitted by the ETH 10/100 ports to the Link interface. |
| 1.3.6.1.4.1.23304.1.1.1.6.59 | ScalarwvEth10-100TxLinkUsageAlarmThresholdHigh | read-write | current | High threshold of the actual no. of bits being transmitted by the ETH 10/100 ports to the Link interface. |
| 1.3.6.1.4.1.23304.1.1.1.6.60 | ScalarwvEth10-100RxLinkUsageAlarmThresholdLow | read-write | current | Low threshold of the actual no. of bits being received by the ETH 10/100 ports from the Link interface. |
| 1.3.6.1.4.1.23304.1.1.1.6.61 | ScalarwvEth10-100RxLinkUsageAlarmThresholdHigh | read-write | current | High threshold of the actual no. of bits being received by the ETH 10/100 ports from the Link interface. |
| 1.3.6.1.4.1.23304.1.1.1.6.70 | ScalarwvEth10-100ThresholdMeasurementInterval | read-write | current | Defines the periodical interval against which the ETH 10/100 alarm thresholds are to be checked. A value of zero means no link performance alarms should be iss… |
| 1.3.6.1.4.1.23304.1.1.1.6.71 | ScalarwvClearAlarmLog | read-write | current | use SET wvClearAlarmLog to Clear the alarm log and insert alarm that 'Alarm log was cleared by user' and GET wvClearAlarmLog to get the number of entries in th… |
| 1.3.6.1.4.1.23304.1.1.1.7 | NodewvComponentsRevisions | |||
| 1.3.6.1.4.1.23304.1.1.1.7.1 | ScalarwvInstalledPlugInPartNo | read-only | current | The 8800 DMR Plug-In Part No. is defined as PIN-'xyztu', as follows: x - interface type: x=1 - T1/T3, x=2 - E1/E3, x=3 - STS1, x=4 - 10/100Base-T + T1s, x=5 - … |
| 1.3.6.1.4.1.23304.1.1.1.7.2 | ScalarwvInstalledPlugInHwRevision | read-only | current | Plug-In Hardware Revision. |
| 1.3.6.1.4.1.23304.1.1.1.7.3 | ScalarwvIduPartNo | read-only | current | The 8800 DMR DIU Part No. is defined as IDU-'xyzt' (exact definition of xyzt TBD). |
| 1.3.6.1.4.1.23304.1.1.1.7.4 | ScalarwvIduHwRevision | read-only | current | IDU Hardware Revision (in fact reflects the ICB - IDU Control Board - revision). |
| 1.3.6.1.4.1.23304.1.1.1.7.5 | ScalarwvIduSwRevision | read-only | current | IDU Software Revision. |
| 1.3.6.1.4.1.23304.1.1.1.7.6 | ScalarwvIduLastSwUpdateTime | read-only | current | Sent together with the software being updated. |
| 1.3.6.1.4.1.23304.1.1.1.7.7 | ScalarwvOduPartNo | read-only | current | The Codan 8800 DMR ODU Part No. is defined as ODU-'xwyzt', as follows: x - Standard: x=1 - FCC(US), x=2 - ETSI(European) w - Duplex Spacing: standard frequency… |
| 1.3.6.1.4.1.23304.1.1.1.7.8 | ScalarwvOduHwRevision | read-only | current | ODU Hardware Revision. |
| 1.3.6.1.4.1.23304.1.1.1.7.9 | ScalarwvOduSwRevision | read-only | current | ODU Software Revision. |
| 1.3.6.1.4.1.23304.1.1.1.7.10 | ScalarwvOduLastSwUpdateTime | read-only | current | Sent together with the software being updated. |
| 1.3.6.1.4.1.23304.1.1.1.7.11 | ScalarwvIpbHwRevision | read-only | current | The IPB (IDU Panel Board) Hardware Revision. |
| 1.3.6.1.4.1.23304.1.1.1.7.12 | ScalarwvBootSwRevision | read-only | current | BOOT Software Revision. |
| 1.3.6.1.4.1.23304.1.1.1.7.13 | ScalarwvIduAlternetSwRevision | read-only | current | IDU Alternate Software Revision. |
| 1.3.6.1.4.1.23304.1.1.1.7.14 | ScalarwvOemId | read-only | current | Describe the manufacture of this system. '1' - Codan. ... future OEM. |
| 1.3.6.1.4.1.23304.1.1.1.7.15 | ScalarwvOemIduPartNo | read-only | current | The OEM IDU Part No. is defined as IDU-'xx-xxxxx-xxx'. |
| 1.3.6.1.4.1.23304.1.1.1.7.16 | ScalarwvOemOduPartNo | read-only | current | The OEM ODU Part No. is defined as ODU-'xx-xxxxx-xxx'. |
| 1.3.6.1.4.1.23304.1.1.1.7.17 | ScalarwvInstalledOemPlugInPartNo | read-only | current | The OEM Plug-in Part No. is defined as Plug-in-'xx-xxxxx-xxx'. |
| 1.3.6.1.4.1.23304.1.1.2 | NodewvStatusAndGauges | |||
| 1.3.6.1.4.1.23304.1.1.2.1 | ScalarwvTelemetryStatus | read-only | current | Keeps the status of the Idu-Odu communication. |
| 1.3.6.1.4.1.23304.1.1.2.2 | ScalarwvOperatingSystemStatus | read-only | current | Keeps the state of the system from the firmware point-of-view. |
| 1.3.6.1.4.1.23304.1.1.2.3 | ScalarwvIduOduCableStatus | read-only | current | Keeps the current status of the Idu-Odu cable. |
| 1.3.6.1.4.1.23304.1.1.2.4 | ScalarwvIduStatus | read-only | current | Reports the current status of the IDU. |
| 1.3.6.1.4.1.23304.1.1.2.5 | ScalarwvOduStatus | read-only | current | Reports the current status of the ODU. |
| 1.3.6.1.4.1.23304.1.1.2.6 | ScalarwvRemoteTerminalStatus | read-only | current | Reports the general current status of the remote terminal. |
| 1.3.6.1.4.1.23304.1.1.2.7 | ScalarwvSlipModemStatus | read-only | current | Keeps the modem current status. |
| 1.3.6.1.4.1.23304.1.1.2.8 | ScalarwvSecurityStatus | read-only | current | Reports the current security status. |
| 1.3.6.1.4.1.23304.1.1.2.9 | ScalarwvTftpDwnlStatus | read-only | current | Describes the status of last TFTP operation. If no TFTP has been performed its status is dwnlStatusUnknown. |
| 1.3.6.1.4.1.23304.1.1.2.10 | ScalarwvLinkPerformanceAlarmsStatus | read-only | current | Reports the status of link performance related alarms. |
| 1.3.6.1.4.1.23304.1.1.2.11 | ScalarwvOperatingFrequency | read-only | current | Specifies the current Spectrum Range Allocation x 100, in Mhz (3800000, 2300000, 1800000, etc...) The value is extracted from the terminal's wvOduPartNo. |
| 1.3.6.1.4.1.23304.1.1.2.12 | ScalarwvFrequencyBand | read-only | current | Specifies the current frequency band, as read from preset jumpers at the ODU. The value read should be compatible with the peer's Link Terminal, so that if one… |
| 1.3.6.1.4.1.23304.1.1.2.13 | ScalarwvChannelSpacing | read-only | current | Specifies the frequency spacing between adjacent channels, as a function of the ODU standard (American vs. European) and chosen wvLinkCapacity. Note that on th… |
| 1.3.6.1.4.1.23304.1.1.2.14 | ScalarwvTxPowerLevel | read-only | current | The transmit power value read at this terminal's ODU output. |
| 1.3.6.1.4.1.23304.1.1.2.15 | ScalarwvRxSignalLevel | read-only | current | The receive signal value read on this terminal. |
| 1.3.6.1.4.1.23304.1.1.2.16 | ScalarwvFadeMargin | read-only | current | The margin on the receive signal level, as a function of the Automatic Gain Control read( min(wvRxSignalLevel) - wvRxSignalLevel ). |
| 1.3.6.1.4.1.23304.1.1.2.17 | ScalarwvOduTemperature | read-only | current | The measured ODU temperature. The units and possible values depend on the ODU model. The shown range is American Fahreneit. The European range is -50..100 Cent… |
| 1.3.6.1.4.1.23304.1.1.2.18 | ScalarwvLedState | read-only | current | The current state of the IDU LEDs. |
| 1.3.6.1.4.1.23304.1.1.2.19 | ScalarwvModemAfc | read-only | current | The measured Modem Automatic Frequency Control. This is an implementation specific value, mainly for diagnostic purposes. |
| 1.3.6.1.4.1.23304.1.1.2.20 | ScalarwvRxPllFrequency | read-only | current | The measured Receive Pll Frequency. This is an implementation specific value, mainly for diagnostic purposes. |
| 1.3.6.1.4.1.23304.1.1.2.21 | ScalarwvWorkingFrequency | read-only | current | Specifies the actual working frequency x 100, in Mhz (3897875, 2122550, 1873875, etc...) The value depends on the chosen wvChannelNo, the terminal's wvOduPartN… |
| 1.3.6.1.4.1.23304.1.1.2.22 | ScalarwvMaxTxPowerSetting | read-only | current | This value present the maximum Tx power that can be achieved by the system (this parameter is the maximum value that the user can set for the 'wvTxPowerSetting… |
| 1.3.6.1.4.1.23304.1.1.2.23 | ScalarwvMinTxPowerSetting | read-only | current | This value present the minimum Tx power that can be achieved by the system (this parameter is the minimum value that the user can set for the 'wvTxPowerSetting… |
| 1.3.6.1.4.1.23304.1.1.2.24 | ScalarwvOduSerialNumber | read-only | current | The serial number of ODU. |
| 1.3.6.1.4.1.23304.1.1.2.25 | ScalarwvIduSerialNumber | read-only | current | The serial number of IDU. |
| 1.3.6.1.4.1.23304.1.1.2.30 | ScalarwvOnePlusOneStatus | read-only | current | Reports the current status of various 1+1 related signals and s/w detected conditions. |
| 1.3.6.1.4.1.23304.1.1.2.31 | ScalarwvSupport2T1and2E1Status | read-only | current | Reports the current status of support 2T1 and 2E1 capacity. |
| 1.3.6.1.4.1.23304.1.1.2.32 | ScalarwvLastUpdateConfigurationTimestamp | read-only | current | The Last Update Configuration Timestamp in system ticks |
| 1.3.6.1.4.1.23304.1.1.2.33 | ScalarwvOemIduSerialNumber | read-only | current | The IDU serial number for OEM manufacture. |
| 1.3.6.1.4.1.23304.1.1.2.34 | ScalarwvOemOduSerialNumber | read-only | current | The ODU serial number for OEM manufacture. |
| 1.3.6.1.4.1.23304.1.1.2.35 | ScalarwvOnePlusOneConnectorType | read-only | current | Reports the current connector type that connected to the plug-in's in the new 1+1 system. |
| 1.3.6.1.4.1.23304.1.1.2.40 | NodewvLog | |||
| 1.3.6.1.4.1.23304.1.1.2.40.1 | ScalarwvLogEventsElapsed | read-only | current | The number of events from last reset |
| 1.3.6.1.4.1.23304.1.1.2.40.2 | TablewvLogEventTable | not-accessible | current | The Log Event table. |
| 1.3.6.1.4.1.23304.1.1.2.40.2.1 | RowwvLogEventEntry | not-accessible | current | An entry in the Log Event table. |
| 1.3.6.1.4.1.23304.1.1.2.40.2.1.1 | ColumnwvLogEventLock | read-only | current | A number between 1 and 64, where 1 is the last (new) event in queue and 64 is the first (old) event in queue. (assuming that all 64 events are valid). |
| 1.3.6.1.4.1.23304.1.1.2.40.2.1.2 | ColumnwvLogEventTime | read-only | current | Defines the event time, relative to sysUpTime |
| 1.3.6.1.4.1.23304.1.1.2.40.2.1.3 | ColumnwvLogEventStatus | read-only | current | Defines the alarm severity. |
| 1.3.6.1.4.1.23304.1.1.2.40.2.1.4 | ColumnwvLogEventDescription | read-only | current | The event description. For example: IDU Tx synt. Fail. |
| 1.3.6.1.4.1.23304.1.1.3 | NodewvPerformance | |||
| 1.3.6.1.4.1.23304.1.1.3.1 | ScalarwvlinkBER | read-only | current | Specifies the terminal's cummulative Bit Error Rate since link last start-up. |
| 1.3.6.1.4.1.23304.1.1.3.2 | ScalarwvlinkBLER | read-only | current | Specifies the terminal's cummulative Corrected Blocks Rate since link last start-up. |
| 1.3.6.1.4.1.23304.1.1.3.3 | ScalarwvlinkBBER | read-only | current | Specifies the terminal's cummulative Background Blocks Error Rate since link last start-up. |
| 1.3.6.1.4.1.23304.1.1.3.4 | ScalarwvlinkNCBLER | read-only | current | Specifies the terminal's cummulative Not Corrected Blocks Error Rate since link last start-up. |
| 1.3.6.1.4.1.23304.1.1.3.5 | ScalarwvLinkESs | read-only | current | Specifies the number of Errored Seconds, encountered by the interface Link since link last start-up. |
| 1.3.6.1.4.1.23304.1.1.3.6 | ScalarwvLinkSESs | read-only | current | Specifies the number of Severely Errored Seconds, encountered by the interface Link since link last start-up. |
| 1.3.6.1.4.1.23304.1.1.3.7 | ScalarwvLinkUAs | read-only | current | Specifies the number of Unavailable Seconds, encountered by the interface Link since link last start-up. |
| 1.3.6.1.4.1.23304.1.1.3.8 | ScalarwvLinkDMs | read-only | current | Specifies the number of Degraded Minutes, encountered by the interface Link since link last start-up. |
| 1.3.6.1.4.1.23304.1.1.3.9 | ScalarwvlinkAverageRSL | read-only | current | Specifies the average Receive Signal Level, encountered by the interface Link since link last start-up. |
| 1.3.6.1.4.1.23304.1.1.3.10 | ScalarwvlinkMaximumRSL | read-only | current | Specifies the maximum Receive Signal Level, encountered by the interface Link since link last start-up. |
| 1.3.6.1.4.1.23304.1.1.3.11 | ScalarwvlinkMinimumRSL | read-only | current | Specifies the minimum Receive Signal Level, encountered by the interface Link since link last start-up. |
| 1.3.6.1.4.1.23304.1.1.3.12 | ScalarwvLinkValidIntervals | read-only | current | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in… |
| 1.3.6.1.4.1.23304.1.1.3.13 | ScalarwvLinkCurrentESs | read-only | current | The number of Errored Seconds, encountered by the interface Link in the current 15 minute interval. |
| 1.3.6.1.4.1.23304.1.1.3.14 | ScalarwvLinkCurrentSESs | read-only | current | The number of Severely Errored Seconds, encountered by the interface Link in the current 15 minute interval. |
| 1.3.6.1.4.1.23304.1.1.3.15 | ScalarwvLinkCurrentUASs | read-only | current | The number of Unavailable Seconds, encountered by the interface Link in the current 15 minute interval. |
| 1.3.6.1.4.1.23304.1.1.3.16 | ScalarwvLinkCurrentDMs | read-only | current | The number of Degraded Minutes, encountered by the interface Link in the current 15 minute interval. |
| 1.3.6.1.4.1.23304.1.1.3.17 | ScalarwvLinkCurrentBER | read-only | current | The Bit Error Rate encountered by the interface Link in the current 15 minute interval. |
| 1.3.6.1.4.1.23304.1.1.3.18 | ScalarwvLinkCurrentBLER | read-only | current | The Corrected Blocks Rate encountered by the interface Link in the current 15 minute interval. |
| 1.3.6.1.4.1.23304.1.1.3.19 | ScalarwvLinkCurrentBBER | read-only | current | The Background Blocks Error Rate encountered by the interface Link in the current 15 minute interval. |
| 1.3.6.1.4.1.23304.1.1.3.20 | ScalarwvLinkCurrentNCBLER | read-only | current | The Not Corrected Blocks Error Rate encountered by the interface Link in the current 15 minute interval. |
| 1.3.6.1.4.1.23304.1.1.3.21 | ScalarwvlinkCurrentAverageRSL | read-only | current | Specifies the average Receive Signal Level, encountered by the Link interface in the current 15 minute interval. |
| 1.3.6.1.4.1.23304.1.1.3.22 | ScalarwvlinkCurrentMaximumRSL | read-only | current | Specifies the maximum Receive Signal Level, encountered by the Link interface in the current 15 minute interval. |
| 1.3.6.1.4.1.23304.1.1.3.23 | ScalarwvlinkCurrentMinimumRSL | read-only | current | Specifies the minimum Receive Signal Level, encountered by the Link interface in the current 15 minute interval. |
| 1.3.6.1.4.1.23304.1.1.3.24 | ScalarwvlinkCurrentTimeElapsed | read-only | current | Specifies the no. of seconds elapsed since the beginning of the current 15 minute interval. |
| 1.3.6.1.4.1.23304.1.1.3.25 | TablewvLinkIntervalTable | not-accessible | current | The Link Interval table. |
| 1.3.6.1.4.1.23304.1.1.3.25.1 | RowwvLinkIntervalEntry | not-accessible | current | An entry in the Link Interval table. |
| 1.3.6.1.4.1.23304.1.1.3.25.1.1 | ColumnwvLinkIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.23304.1.1.3.25.1.2 | ColumnwvLinkIntervalESs | read-only | current | The number of Errored Seconds encountered by the Link interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.23304.1.1.3.25.1.3 | ColumnwvLinkIntervalSESs | read-only | current | The number of Severely Errored Seconds encountered by the Link interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.23304.1.1.3.25.1.4 | ColumnwvLinkIntervalUASs | read-only | current | The number of Unavailable Seconds encountered by the Link interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.23304.1.1.3.25.1.5 | ColumnwvLinkIntervalDMs | read-only | current | The number of Degraded Minutes (DMs) encountered by the Link interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.23304.1.1.3.25.1.6 | ColumnwvLinkIntervalBER | read-only | current | The Bit Error Rate encountered by the Link interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.23304.1.1.3.25.1.7 | ColumnwvLinkIntervalBLER | read-only | current | The Corrected Blocks Rate encountered by the Link interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.23304.1.1.3.25.1.8 | ColumnwvLinkIntervalBBER | read-only | current | The Background Blocks Error Rate encountered by the Link interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.23304.1.1.3.25.1.9 | ColumnwvLinkIntervalNCBLER | read-only | current | The Not Corrected Blocks Error Rate encountered by the Link interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.23304.1.1.3.25.1.10 | ColumnwvlinkIntervalAverageRSL | read-only | current | Specifies the average Receive Signal Level, encountered by the Link interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.23304.1.1.3.25.1.11 | ColumnwvlinkIntervalMaximumRSL | read-only | current | Specifies the maximum Receive Signal Level, encountered by the Link interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.23304.1.1.3.25.1.12 | ColumnwvlinkIntervalMinimumRSL | read-only | current | Specifies the minimum Receive Signal Level, encountered by the Link interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.23304.1.1.3.26 | ScalarwvLinkTotalESs | read-only | current | The number of Errored Seconds encountered by the Link interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.23304.1.1.3.27 | ScalarwvLinkTotalSESs | read-only | current | The number of Severely Errored Seconds encountered by the Link interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.23304.1.1.3.28 | ScalarwvLinkTotalUASs | read-only | current | The number of Unavailable Seconds encountered by the Link interface the previous 24 hour interval. |
| 1.3.6.1.4.1.23304.1.1.3.29 | ScalarwvLinkTotalDMs | read-only | current | The number of Degraded Minutes (DMs) encountered by the Link interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.23304.1.1.3.30 | ScalarwvLinkTotalBER | read-only | current | The Bit Error Rate encountered by the Link interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.23304.1.1.3.31 | ScalarwvLinkTotalBLER | read-only | current | The Corrected Blocks Rate encountered by the Link interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.23304.1.1.3.32 | ScalarwvLinkTotalBBER | read-only | current | The Background Blocks Error Rate encountered by the Link interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.23304.1.1.3.33 | ScalarwvLinkTotalNCBLER | read-only | current | The Not Corrected Blocks Rate encountered by the Link interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.23304.1.1.3.34 | ScalarwvlinkTotalAverageRSL | read-only | current | Specifies the average Receive Signal Level, encountered by the Link interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.23304.1.1.3.35 | ScalarwvlinkTotalMaximumRSL | read-only | current | Specifies the maximum Receive Signal Level, encountered by the Link interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.23304.1.1.3.36 | ScalarwvlinkTotalMinimumRSL | read-only | current | Specifies the minimum Receive Signal Level, encountered by the Link interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.23304.1.1.3.40 | ScalarwvlinkNoOfReceivedKBits | read-only | current | Specifies the total number of kilobits received by the Link interface. |
| 1.3.6.1.4.1.23304.1.1.3.41 | ScalarwvlinkNoOfErrors | read-only | current | Specifies the total number of errors received by the Link interface, before FEC Correction. |
| 1.3.6.1.4.1.23304.1.1.3.42 | ScalarwvlinkErroredBlocks | read-only | current | Specifies the total number of errored blocks received by the Link interface, before FEC Correction. |
| 1.3.6.1.4.1.23304.1.1.3.43 | ScalarwvlinkNotCorrectedErroredBlocks | read-only | current | Specifies the total number of blocks that could not be corrected by the FEC, received by the Link interface. |
| 1.3.6.1.4.1.23304.1.1.3.50 | ScalarwvLinkPerformanceCountTime | read-only | current | The time (in hundredths of a second) since when Link related performance is calculated. It behaves like sysUpTime and is reset to 0 whenever Link characteristi… |
| 1.3.6.1.4.1.23304.1.1.3.60 | ScalarwvlinkInstantaneousBER | read-only | current | The Instantaneous Bit Error Rate encountered by the Link interface. This is the value adaptively calculated to reach a 1% measurement precision. |
| 1.3.6.1.4.1.23304.1.1.3.100 | ScalarwvEth10-100TxLinkUsage | read-only | current | Shows the actual no. of bits being transmitted by the ETH 10/100 ports to the Link interface. |
| 1.3.6.1.4.1.23304.1.1.3.101 | ScalarwvEth10-100RxLinkUsage | read-only | current | Shows the actual no. of bits being received by the ETH 10/100 ports from the Link interface. |
| 1.3.6.1.4.1.23304.1.1.3.102 | ScalarwvEth10-100TxLinkUtilization | read-only | current | Shows the calculated ETH 10/100 Link percentage Tx usage (100 X wvEth10-100TxLinkUsage / total channel capacity). |
| 1.3.6.1.4.1.23304.1.1.3.103 | ScalarwvEth10-100RxLinkUtilization | read-only | current | Shows the calculated ETH 10/100 Link percentage Rx usage (100 X wvEth10-100RxLinkUsage / total channel capacity). |
| 1.3.6.1.4.1.23304.1.1.4 | NodewvTests | |||
| 1.3.6.1.4.1.23304.1.1.4.1 | ScalarwvLoopbackType | read-write | current | Defines the type of loopback to be performed on the terminal. |
| 1.3.6.1.4.1.23304.1.1.4.2 | ScalarwvLoopbackStartTime | read-write | current | Defines the desired delay time, in time-ticks, before the loopbacks specified by wvLoopbackType are activated. When any loopback is on, either on delay or star… |
| 1.3.6.1.4.1.23304.1.1.4.3 | ScalarwvLoopbackTimePeriod | read-write | current | Defines the desired duration of the loopback. Setting a value of 0 means it should run until deliberately stopped. |
| 1.3.6.1.4.1.23304.1.1.4.4 | ScalarwvLoopbackRemainingStartTime | read-only | current | Defines the ongoing remaining time before the loopbacks specified by wvLoopbackType are activated. |
| 1.3.6.1.4.1.23304.1.1.4.5 | ScalarwvLoopbackRemainingTimePeriod | read-only | current | Defines the ongoing remaining duration of the loopback activation. |
| 1.3.6.1.4.1.23304.1.1.4.100 | ScalarwvSelfTestType | read-write | deprecated | Defines the type of next self-tests to be performed on the terminal. Local restrictions may limit the tests that can be performed simultaneously. |
| 1.3.6.1.4.1.23304.1.1.4.101 | ScalarwvSelfTestStartTime | read-write | deprecated | Defines the desired delay time, in time-ticks, before the tests specified by wvSelfTestType are started. When any test is running, 0 forces a premature stop. |
| 1.3.6.1.4.1.23304.1.1.4.102 | ScalarwvLastSelfTestStartTime | read-only | current | Keeps the time, relative to sysUpTime, when the tests in the wvLastSelfTestTable were last performed. |
| 1.3.6.1.4.1.23304.1.1.4.103 | TablewvLastSelfTestTable | not-accessible | current | A table of last self tests. |
| 1.3.6.1.4.1.23304.1.1.4.103.1 | RowwvLastSelfTestEntry | not-accessible | current | Entry in the wvLastSelfTestTable. There is one for each of the last run self-tests. |
| 1.3.6.1.4.1.23304.1.1.4.103.1.1 | ColumnwvLastSelfTestType | read-only | current | The self-test type for this entry. |
| 1.3.6.1.4.1.23304.1.1.4.103.1.2 | ColumnwvLastSelfTestStatus | read-only | current | The status of the test specified in wvLastSelfTestType. |
| 1.3.6.1.4.1.23304.1.1.4.104 | ScalarwvSelfTestRemainingStartTime | read-only | deprecated | Defines the ongoing remaining time before the tests specified by wvSelfTestType start. |
| 1.3.6.1.4.1.23304.1.1.4.200 | ScalarwvInsertTestSignalLine | read-write | current | Defines the line(s) on which a special BER test signal is inserted. Proper loopbacks are assumed to be previously set for the test to succeed. If no loopback i… |
| 1.3.6.1.4.1.23304.1.1.4.201 | ScalarwvInsertTestSignalStartTime | read-write | current | Defines the desired delay time, in time-ticks, before the tests on the lines specified by wvInsertTestSignalLine are started. When any test is on, 0 forces a p… |
| 1.3.6.1.4.1.23304.1.1.4.202 | ScalarwvInsertTestSignalTimePeriod | read-write | current | Defines the desired duration of the tests. Setting a value of 0 means it should run until deliberately stopped. |
| 1.3.6.1.4.1.23304.1.1.4.203 | ScalarwvLastTestSignalTime | read-only | current | Defines the time, relative to sysUpTime, when the insert test signal was last performed. |
| 1.3.6.1.4.1.23304.1.1.4.204 | ScalarwvLastTestSignalBER | read-only | current | Specifies the Bit Error Rate from last test signal activation. |
| 1.3.6.1.4.1.23304.1.1.4.205 | ScalarwvInsertTestSignalRemainingStartTime | read-only | current | Defines the ongoing remaining time before the tests on the lines specified by wvInsertTestSignalLine start. |
| 1.3.6.1.4.1.23304.1.1.4.206 | ScalarwvInsertTestSignalRemainingTimePeriod | read-only | current | Defines the ongoing remaining duration of the tests. |
| 1.3.6.1.4.1.23304.1.1.4.300 | ScalarwvGenericDiagnosticsParameterAddress | read-write | current | This object defines the address on the IDU physical memory from which wvGenericDiagnosticsParameterValue below is read. The given address will be aligned to lo… |
| 1.3.6.1.4.1.23304.1.1.4.301 | ScalarwvGenericDiagnosticsParameterValue | read-only | current | Reading of this object returns the 4 bytes (long) value on the address specified by wvGenericDiagnosticsParameterAddress above. |
| 1.3.6.1.4.1.23304.1.1.10 | NodewvTraps | |||
| 1.3.6.1.4.1.23304.1.1.10.0 | NodewvTraps0 | |||
| 1.3.6.1.4.1.23304.1.1.10.0.1 | NotificationwvIduOduCableFaultStart | current | A trap indicating Idu or Odu cable fail | |
| 1.3.6.1.4.1.23304.1.1.10.0.2 | NotificationwvIduOduCableFaultStop | current | A trap indicating restoring from wvIduOduCableFaultStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.3 | NotificationwvIduInternalFaultStart | current | A trap indicating Idu internal fail: RX or TX synthesizer out of lock or power supply fail | |
| 1.3.6.1.4.1.23304.1.1.10.0.4 | NotificationwvIduInternalFaultStop | current | A trap indicating restoring from wvIduInternalFaultStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.5 | NotificationwvOduInternalFaultStart | current | A trap indicating Odu internal fail: RX or TX synthesizer out of lock or power supply fail | |
| 1.3.6.1.4.1.23304.1.1.10.0.6 | NotificationwvOduInternalFaultStop | current | A trap indicating restoring from wvOduInternalFaultStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.7 | NotificationwvLinkDownStart | current | A trap indicating that MUX or MODEM is not synchronized | |
| 1.3.6.1.4.1.23304.1.1.10.0.8 | NotificationwvLinkDownStop | current | A trap indicating restoring from wvLinkDownStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.9 | NotificationwvIdViolationStart | current | A trap indicating that the last received peer Link ID does not match the local Link ID | |
| 1.3.6.1.4.1.23304.1.1.10.0.10 | NotificationwvIdViolationStop | current | A trap indicating restoring from wvIdViolationStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.11 | NotificationwvRemoteAccessStart | current | A trap indicating that the remote terminal is not accessable | |
| 1.3.6.1.4.1.23304.1.1.10.0.12 | NotificationwvRemoteAccessStop | current | A trap indicating restoring from wvRemoteAccessStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.13 | NotificationwvLocalOduAccessStart | current | A trap indicating that the local Odu is not responding | |
| 1.3.6.1.4.1.23304.1.1.10.0.14 | NotificationwvLocalOduAccessStop | current | A trap indicating restoring from wvLocalOduAccessStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.15 | NotificationwvReceiveSignalLowerLevelStart | current | A trap indicating that the local RSL is out of the lower range | |
| 1.3.6.1.4.1.23304.1.1.10.0.16 | NotificationwvReceiveSignalLowerLevelStop | current | A trap indicating restoring from wvReceiveSignalLowerLevelStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.17 | NotificationwvRelayStart | current | A trap indicating that the relay was switched to on | |
| 1.3.6.1.4.1.23304.1.1.10.0.18 | NotificationwvRelayStop | current | A trap indicating that the relay was switched to off | |
| 1.3.6.1.4.1.23304.1.1.10.0.19 | NotificationwvLineAisStart | current | A trap indicating that the port transmit AIS | |
| 1.3.6.1.4.1.23304.1.1.10.0.20 | NotificationwvLineAisStop | current | A trap indicating restoring from wvLineAisStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.21 | NotificationwvLineLosStart | current | A trap indicating that there is an LOS on the specified line | |
| 1.3.6.1.4.1.23304.1.1.10.0.22 | NotificationwvLineLosStop | current | A trap indicating restoring from wvLineLosStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.23 | NotificationwvBerWarningStart | current | A trap indicating that the local BER is out of range | |
| 1.3.6.1.4.1.23304.1.1.10.0.24 | NotificationwvBerWarningStop | current | A trap indicating restoring from wvBerStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.25 | NotificationwvBerFatalStart | current | A trap indicating that the local BER is out of range | |
| 1.3.6.1.4.1.23304.1.1.10.0.26 | NotificationwvBerFatalStop | current | A trap indicating restoring from wvBerStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.27 | NotificationwvExternalInputsStart | current | A trap indicating that the external input is active | |
| 1.3.6.1.4.1.23304.1.1.10.0.28 | NotificationwvExternalInputsStop | current | A trap indicating restoring from wvExternalInputsStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.29 | NotificationwvLinkUasStart | current | A trap indicating that the link UAS is out of range | |
| 1.3.6.1.4.1.23304.1.1.10.0.30 | NotificationwvLinkUasStop | current | A trap indicating restoring from wvLinkUasStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.31 | NotificationwvTftpFail | current | A trap indicating that there was TFTP operation fault | |
| 1.3.6.1.4.1.23304.1.1.10.0.32 | NotificationwvTftpSuccess | current | A trap indicating that the last TFTP operation was successful | |
| 1.3.6.1.4.1.23304.1.1.10.0.33 | NotificationwvOduTempViolationStart | current | A trap indicating that the ODU temperature is out of range | |
| 1.3.6.1.4.1.23304.1.1.10.0.34 | NotificationwvOduTempViolationStop | current | A trap indicating restoring from wvOduTempViolationStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.35 | NotificationwvOduTxMuteStart | current | A trap indicating that the ODU transmitter is in mute state | |
| 1.3.6.1.4.1.23304.1.1.10.0.36 | NotificationwvOduTxMuteStop | current | A trap indicating restoring from wvOduTxMuteStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.37 | NotificationwvIduPowerSupplyStart | current | A trap indicating that theIDU ha power supply problems | |
| 1.3.6.1.4.1.23304.1.1.10.0.38 | NotificationwvIduPowerSupplyStop | current | A trap indicating restoring from wvIduPowerSupplyStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.39 | NotificationwvIduConfigurationMismatch | current | A trap indicating that the IDU's configuration does not match the current hardware | |
| 1.3.6.1.4.1.23304.1.1.10.0.40 | NotificationwvIduBankSwitchover | current | A trap indicating that the bank switchover had occured | |
| 1.3.6.1.4.1.23304.1.1.10.0.41 | NotificationwvIduPortLoopbackStart | current | A trap indicating that the corresponding poer is in loopback state | |
| 1.3.6.1.4.1.23304.1.1.10.0.42 | NotificationwvIduPortLoopbackStop | current | A trap indicating restoring from wvIduPortLoopbackStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.43 | NotificationwvIduPortBertStart | current | A trap indicating that the corresponding poer is in loopback state | |
| 1.3.6.1.4.1.23304.1.1.10.0.44 | NotificationwvIduPortBertStop | current | A trap indicating restoring from wvIduPortBertStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.45 | NotificationwvIduHeartBit | current | Serial Numbers: Odu, Idu; HeartBit Values ( string): A HeartBit trap | |
| 1.3.6.1.4.1.23304.1.1.10.0.46 | NotificationwvAisReceiveStart | current | A trap indicating that the port receives AIS | |
| 1.3.6.1.4.1.23304.1.1.10.0.47 | NotificationwvAisReceiveStop | current | A trap indicating restoring from wvAisReceiveStart | |
| 1.3.6.1.4.1.23304.1.1.10.0.48 | NotificationwlEth10x100RxLinkUsageLowStart | current | A trap indicating that the Rx Link Usage is out of low range | |
| 1.3.6.1.4.1.23304.1.1.10.0.49 | NotificationwlEth10x100RxLinkUsageLowStop | current | A trap indicating that the Rx Link Usage is in low range | |
| 1.3.6.1.4.1.23304.1.1.10.0.50 | NotificationwlEth10x100RxLinkUsageHighStart | current | A trap indicating that the Rx Link Usage is out of High range | |
| 1.3.6.1.4.1.23304.1.1.10.0.51 | NotificationwlEth10x100RxLinkUsageHighStop | current | A trap indicating that the Rx Link Usage is in High range | |
| 1.3.6.1.4.1.23304.1.1.10.0.52 | NotificationwlEth10x100TxLinkUsageLowStart | current | A trap indicating that the Tx Link Usage is out of Low range | |
| 1.3.6.1.4.1.23304.1.1.10.0.53 | NotificationwlEth10x100TxLinkUsageLowStop | current | A trap indicating that the Tx Link Usage is in Low range | |
| 1.3.6.1.4.1.23304.1.1.10.0.54 | NotificationwlEth10x100TxLinkUsageHighStart | current | A trap indicating that the Tx Link Usage is out of High range | |
| 1.3.6.1.4.1.23304.1.1.10.0.55 | NotificationwlEth10x100TxLinkUsageHighStop | current | A trap indicating that the Tx Link Usage is in High range | |
| 1.3.6.1.4.1.23304.1.1.10.1 | NodewvTrapVars | |||
| 1.3.6.1.4.1.23304.1.1.10.1.1 | ScalarwvTrapKeepAlivePeriod | read-write | current | This object defines the keep alive traps period in minutes. |
| 1.3.6.1.4.1.23304.1.1.10.1.2 | ScalarwvAisPortTrap | read-only | current | This object defines the port munber that refers to wvLineAisStart/wvLineAisStop /wvAisReceiveStart/wvAisReceiveStop, this number should be used as wvTributaryP… |
| 1.3.6.1.4.1.23304.1.1.10.1.3 | ScalarwvLosPortTrap | read-only | current | This object defines the port munber that refers to wvLineLosStart/wvLineLosStop, this number should be used as wvTributaryPortIfIndex in the wvTributaryPortTab… |
| 1.3.6.1.4.1.23304.1.1.10.1.4 | ScalarwvExternalInputTrap | read-only | current | This object defines the external input munber that refers to wvExternalInputsStart/wvExternalInputsStop. |
| 1.3.6.1.4.1.23304.1.1.10.1.5 | ScalarwvRelayIdTrap | read-only | current | This object defines the relay id munber that refers to wvRelayStart\wvRelayStop, this number should be used as wvRelayId in the wvRelayTable. |
| 1.3.6.1.4.1.23304.1.1.10.1.6 | ScalarwvSelectTrapVector | read-write | current | Private traps mapping. |
| 1.3.6.1.4.1.23304.1.1.10.1.7 | ScalarwvTrapKeepAliveVarsSelect | read-write | current | Keep Alive trap variables mapping. |
| 1.3.6.1.4.1.23304.1.1.10.1.8 | ScalarwvTrapKeepAliveString | read-only | current | A verbal string send with the wvIduHeartBit trap Has the following format: Serial Numbers: \ [RSL = ] [BER = ] [UAS = ] |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ComponentRevision | OCTET STRING(SIZE(2)) | current | The hex value in the first octet - xx - represent the major revision no. and the hex value in the second octet - yy - the minor revision no. |
| FloatingPoint | OCTET STRING(SIZE(3)) | current | The hex value in the first 2 octets specify the mantissa*1000 (1000 =< value <= 9999) and the hex value in the 3rd octet specify the 10th power (1 =< n <= 15). Example: For user input of 1.025E-7 the hex value should be… |
| FrontPanelPassword | OCTET STRING (SIZE(0..5)) | current | Describes a Front Panel Password key sequence, in the following convention: 0 - end of password string 1 - ESC key 2 - SEL/SAVE key 3 - Arrow Right key 4 - Arrow Left key 5 - LOCAL/REMOTE key |
| WvAlarmsList | BITS { filler0(0), wvTelemetrynotOperational(1), wvIduOduCableFault(2), wvOperatingSystemFailure(3), iduPowerSupplyLowValue(4), iduTxSynthesizerOutOfLock(5), iduRxSynthesizerOutOfLock(6), iduNotOperational(7), oduPowerSupplyOutOfRange(8), txFailure(9), oduTxSynthesizerOutOfLock(10), oduRxSynthesizerOutOfLock(11), oduRfSynthesizerOutOfLock(12), remoteTerminalNotResponding(13), linkDown(14), filler15(15), filler16(16), filler17(17), filler18(18), filler19(19), selfTestFault(20), rxFailure(21), wvTelemetryFailure(22), oduTemperatureViolation(23), anyOtherOduFault(24), oduNotResponding(25), wvSlipModemFailure(26), linkIdViolation(27), wvTftpDwnlFailure(28), wvLinkESAlarm(29), wvLinkSESAlarm(30), wvLinkUASAlarm(31), wvLinkDMAlarm(32), wvLinkBERFailureAlarm(33), wvLinkBLERAlarm(34), wvLinkBBERAlarm(35), wvLinkNCBLERAlarm(36), dwnlGeneralError(37), dwnlNoResponseFromServer(38), dwnlChecksumError(39), dwnlSwIncompatibleImage(40), dwnlConfigIncompatibleImage(41), dwnlTftpFileNotFound(42), dwnlTftpAccessViolation(43), remoteTerminalFailure(44), filler45(45), filler46(46), filler47(47), filler48(48), filler49(49), txOnMuteState(50), rxOnMuteState(51), remoteTerminalWarning(52), passwordBypass(53), wvLinkBERWarningAlarm(54), rslLow(55), averageRSLLow(56), ds1Line-1-AIS(57), ds1Line-2-AIS(58), ds1Line-3-AIS(59), ds1Line-4-AIS(60), ds1Line-5-AIS(61), ds1Line-6-AIS(62), ds1Line-7-AIS(63), ds1Line-8-AIS(64), ds1Line-9-AIS(65), ds1Line-10-AIS(66), ds1Line-11-AIS(67), ds1Line-12-AIS(68), ds1Line-13-AIS(69), ds1Line-14-AIS(70), ds1Line-15-AIS(71), ds1Line-16-AIS(72), ds3Sts1Line-AIS(73), ds1Line-1-LOS(74), ds1Line-2-LOS(75), ds1Line-3-LOS(76), ds1Line-4-LOS(77), ds1Line-5-LOS(78), ds1Line-6-LOS(79), ds1Line-7-LOS(80), ds1Line-8-LOS(81), ds1Line-9-LOS(82), ds1Line-10-LOS(83), ds1Line-11-LOS(84), ds1Line-12-LOS(85), ds1Line-13-LOS(86), ds1Line-14-LOS(87), ds1Line-15-LOS(88), ds1Line-16-LOS(89), ds3Sts1Line-LOS(90), ds1Line-1-USD(91), ds1Line-2-USD(92), ds1Line-3-USD(93), ds1Line-4-USD(94), ds1Line-5-USD(95), ds1Line-6-USD(96), ds1Line-7-USD(97), ds1Line-8-USD(98), ds1Line-9-USD(99), ds1Line-10-USD(100), ds1Line-11-USD(101), ds1Line-12-USD(102), ds1Line-13-USD(103), ds1Line-14-USD(104), ds1Line-15-USD(105), ds1Line-16-USD(106), ds3Sts1Line-USD(107), ds1Line-1-LOOP(108), ds1Line-2-LOOP(109), ds1Line-3-LOOP(110), ds1Line-4-LOOP(111), ds1Line-5-LOOP(112), ds1Line-6-LOOP(113), ds1Line-7-LOOP(114), ds1Line-8-LOOP(115), ds1Line-9-LOOP(116), ds1Line-10-LOOP(117), ds1Line-11-LOOP(118), ds1Line-12-LOOP(119), ds1Line-13-LOOP(120), ds1Line-14-LOOP(121), ds1Line-15-LOOP(122), ds1Line-16-LOOP(123), ds3Sts1Line-LOOP(124), dwnlStatusUnknown(125), dwnlInProcess(126), dwnlSuccess(127), ifLinkDown(128), wvTelemetryWarning(129), filler130(130), eth10-100Port-1-CSL(131), eth10-100Port-2-CSL(132), eth10-100Port-3-CSL(133), eth10-100Port-4-CSL(134), eth10-100Port-1-EC(135), eth10-100Port-2-EC(136), eth10-100Port-3-EC(137), eth10-100Port-4-EC(138), eth10-100Port-1-IMTE(139), eth10-100Port-2-IMTE(140), eth10-100Port-3-IMTE(141), eth10-100Port-4-IMTE(142), eth10-100Port-1-IMRE(143), eth10-100Port-2-IMRE(144), eth10-100Port-3-IMRE(145), eth10-100Port-4-IMRE(146), filler147(147), externalInput1Active(148), externalInput2Active(149), externalInput3Active(150), externalInput4Active(151), externalInput5Active(152), externalInput6Active(153), externalInput7Active(154), externalInput8Active(155), eth10-100RxLinkUsageLow(156) , eth10-100RxLinkUsageHigh(157), eth10-100TxLinkUsageLow(158), eth10-100TxLinkUsageHigh(159) } | current | Describes all the possible alarms in the system as a bit pattern, taken directly from the various statuses (see wvStatusAndGauges group). The alarms are sorted in a descending severity order (fatal/error/warning), thus … |
| WvLoopbacksList | BITS { filler0(0), localIduInputdsx1-1(1), localIduInputdsx1-2(2), localIduInputdsx1-3(3), localIduInputdsx1-4(4), localIduInputdsx1-5(5), localIduInputdsx1-6(6), localIduInputdsx1-7(7), localIduInputdsx1-8(8), localIduInputdsx1-9(9), localIduInputdsx1-10(10), localIduInputdsx1-11(11), localIduInputdsx1-12(12), localIduInputdsx1-13(13), localIduInputdsx1-14(14), localIduInputdsx1-15(15), localIduInputdsx1-16(16), localIduInputdsx3sts1(17), localIduOutput(18), localOdu(19), localIduInput(20), remoteIdudsx1-1(21), remoteIdudsx1-2(22), remoteIdudsx1-3(23), remoteIdudsx1-4(24), remoteIdudsx1-5(25), remoteIdudsx1-6(26), remoteIdudsx1-7(27), remoteIdudsx1-8(28), remoteIdudsx1-9(29), remoteIdudsx1-10(30), remoteIdudsx1-11(31), remoteIdudsx1-12(32), remoteIdudsx1-13(33), remoteIdudsx1-14(34), remoteIdudsx1-15(35), remoteIdudsx1-16(36), remoteIdudsx3sts1(37), filler38(38), filler39(39), filler40(40), localIduInputEth10-100-1(41), localIduInputEth10-100-2(42), remoteIduEth10-100-1(43), remoteIduEth10-100-2(44) } | current | Describes the type of loopbacks that can be performed on the terminal. Local restrictions may dictate how many and which loopbacks can be performed simultaneously. |