COM21-HCXRX-MIB
169 objects
This is the Com21 ComController RX card MIB. COM21 Part# 005-0025-00
Imported Objects
| COM21-HCX-MIB | com21 com21Hcx com21Traps |
| COM21-HCXALM-MIB | hcxAlmSeverity hcxEventLogTime |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1141.2.30 | Identitycom21HcxRx | This is the Com21 ComController RX card MIB. COM21 Part# 005-0025-00 | ||
| 1.3.6.1.4.1.1141.2.31 | Nodecom21HcxUpstrmPortGroup | |||
| 1.3.6.1.4.1.1141.2.31.1 | Tablecom21HcxUpstrmPortTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.31.1.1 | Rowcom21HcxUpstrmPortEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.31.1.1.1 | ColumnhcxUpstrmPortShelfId | read-only | current | contains upstream shelf id containing the RX card. |
| 1.3.6.1.4.1.1141.2.31.1.1.2 | ColumnhcxUpstrmPortSlotId | read-only | current | contains upstream slot id containing the port. Presently there is one port per card. |
| 1.3.6.1.4.1.1141.2.31.1.1.3 | ColumnhcxUpstreamPortId | read-only | current | Contains the id for the upstream port. Presently should be one only. |
| 1.3.6.1.4.1.1141.2.31.1.1.4 | ColumnhcxRecvFrequency | read-write | current | Contains the receive frequency of the RF board in KHz. Note that any change to this frequency shall result in temporary loss of service for the ComPorts as the… |
| 1.3.6.1.4.1.1141.2.31.1.1.5 | ColumnhcxRecvPower | read-write | current | Contains the receiver power level in dBmv. Default is 0. |
| 1.3.6.1.4.1.1141.2.31.1.1.6 | ColumnhcxUpstrmAggrStuCbrRate | read-only | current | This attribute defines the aggregate of all ComPort upstream CBR rates on the RX port. Defined in Kbps. |
| 1.3.6.1.4.1.1141.2.31.1.1.7 | ColumnhcxUpstrmAggrStuMinRate | read-only | current | This attribute defines the aggregate of all ComPort upstream Minimum rates on the RX port. Defined in Kbps. |
| 1.3.6.1.4.1.1141.2.31.1.1.8 | ColumnhcxUpstrmAggrStuMaxRate | read-only | current | This attribute defines the aggregate of all ComPort upstream Maximum rates on the RX port. Defined in Kbps. |
| 1.3.6.1.4.1.1141.2.31.1.1.9 | ColumnhcxUpstrmFreqHopping | read-write | current | This attribute controls whether an RX port is protected by automatic frequency hopping. If this attribute is transitioned from on -> off then the RX port shall… |
| 1.3.6.1.4.1.1141.2.31.1.1.10 | ColumnhcxUpstrmAltFreqA | read-write | current | Contains the first alternate frequency for this RX port. This need NOT be unique. i.e. other RX ports within the receiver group can also share the same alterna… |
| 1.3.6.1.4.1.1141.2.31.1.1.11 | ColumnhcxUpstrmAltFreqB | read-write | current | Contains the second alternate frequency for this RX port. Same restrictions and defaults as for hcxUpstrmAltFreqA. |
| 1.3.6.1.4.1.1141.2.31.1.1.12 | ColumnhcxUpstrmActiveFreq | read-only | current | Contains the presently active frequency. i.e. primary, alternate A or alternate B. Upon initial deployment of the system this frequency will always match the p… |
| 1.3.6.1.4.1.1141.2.31.1.1.13 | ColumnhcxUpstrmRpmControl | read-write | current | Defines RPM control. This attribute is only applicable in the case of an RXM card. For the RX card this attribute will be read-only with a value of notSupporte… |
| 1.3.6.1.4.1.1141.2.31.1.1.14 | ColumnhcxUpstrmRpmPrimServState | read-only | current | contains primary service state of the RPM. |
| 1.3.6.1.4.1.1141.2.31.1.1.15 | ColumnhcxUpstrmRpmSecServState | read-only | current | contains a string defining the secondary service states of the RPM. The substrings supported by the RPM shall be: UNEQ - not present, CONF - invalid configurat… |
| 1.3.6.1.4.1.1141.2.31.1.1.16 | ColumnhcxUpstrmRpmConnType | read-only | current | contains management connection type to the RPM device. Note that if the RxM is in slave mode, then the state information defined by the attributes above shall … |
| 1.3.6.1.4.1.1141.2.31.1.1.17 | ColumnhcxUpstrmAggrStuVoiceRate | read-only | current | This attribute defines the aggregate of all ComPort upstream voice rates on the RX port. Defined in Kbps. |
| 1.3.6.1.4.1.1141.2.32 | Nodecom21HcxUpstrmStatsGroup | |||
| 1.3.6.1.4.1.1141.2.32.1 | Tablecom21HcxUpstrmStatsTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.32.1.1 | Rowcom21HcxUpstrmStatsEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.32.1.1.1 | ColumnhcxStatsUpstreamShelfId | read-only | current | Contains the id for the shelf in which the associated RX card is located. |
| 1.3.6.1.4.1.1141.2.32.1.1.2 | ColumnhcxStatsUpstreamSlotId | read-only | current | Contains the id for the upstream slot. |
| 1.3.6.1.4.1.1141.2.32.1.1.3 | ColumnhcxStatsUpstreamPortId | read-only | current | Contains the id for the upstream port. Between 1 and 12 |
| 1.3.6.1.4.1.1141.2.32.1.1.4 | ColumnhcxPortCurrMinRxCells | read-only | current | Represents the number of cells received in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.5 | ColumnhcxPortCurrMinRxNullCells | read-only | current | Represents the number of null cells received in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.6 | ColumnhcxPortCurrMinUncorrFecHecCells | read-only | current | Represents the number of received cells with either uncorrectable FEC or HEC errors in current 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.8 | ColumnhcxPortCurrMinCorrectedFec | read-only | current | Represents the number of corrected FEC errors in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.9 | ColumnhcxPortCurrMinOverSubPeriods | read-only | current | Represents the number of 512 cell slot scheduling periods that were actively oversubscribed in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.10 | ColumnhcxPortPrevMinRxCells | read-only | current | Represents the number of cells received in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.11 | ColumnhcxPortPrevMinRxNullCells | read-only | current | Represents the number of cells received in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.12 | ColumnhcxPortPrevMinUncorrFecHecCells | read-only | current | Represents the number of received cells with either uncorrectable FEC or HEC errors in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.14 | ColumnhcxPortPrevMinCorrectedFec | read-only | current | Represents the number of corrected FEC errors in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.15 | ColumnhcxPortPrevMinOverSubPeriods | read-only | current | Represents the number of 512 cell slot scheduling periods that were actively oversubscribed in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.16 | ColumnhcxPortUpstreamUtil | read-only | current | Represents the percentage of utilization on all slots of the upstream channel. |
| 1.3.6.1.4.1.1141.2.32.1.1.17 | ColumnhcxPortCurrMeanNoise | read-only | current | This attribute defines the mean noise level in dBmv sampled by the RX card in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.18 | ColumnhcxPortPrevMeanNoise | read-only | current | This attribute defines the mean noise level in dBmv sampled by the RX card in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.19 | ColumnhcxPortCorrFecRatioThres | read-write | current | This attribute defines a threshold point at which a hop of the receive channel frequency shall take place. The threshold is defined as the percentage of correc… |
| 1.3.6.1.4.1.1141.2.32.1.1.20 | ColumnhcxPortCellErrRatioThres | read-write | current | This attribute defines a threshold point at which a hop of the receive channel frequency shall take place. The threshold is defined as the percentage of FEC/HE… |
| 1.3.6.1.4.1.1141.2.32.1.1.21 | ColumnhcxPortRatioThresPeriod | read-write | current | This attribute defines the integration period for the error ratio thresholds. This attribute defines the number of seconds over which the threshold is contiguo… |
| 1.3.6.1.4.1.1141.2.32.1.1.22 | ColumnhcxPortMinErrRatioCells | read-write | current | This attribute defines the minimum number of cells that should be received per second in order to allow the Error and Corrected Cell Thresholds to cause a freq… |
| 1.3.6.1.4.1.1141.2.32.1.1.23 | ColumnhcxPortCnrThres | read-write | current | Defines the average carrier to noise level, in dB, at which a frequency hop should occur. Note that the data error thresholds define above take precedence - th… |
| 1.3.6.1.4.1.1141.2.32.1.1.24 | ColumnhcxPortCurrMinNoise | read-only | current | defines the minimum noise level in dBmv sampled by the RX card in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.25 | ColumnhcxPortCurrMaxNoise | read-only | current | defines the maximum noise level in dBmv sampled by the RX card in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.26 | ColumnhcxPortPrevMinNoise | read-only | current | defines the minimum noise level in dBmv sampled by the RX card in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.27 | ColumnhcxPortPrevMaxNoise | read-only | current | defines the maximum noise level in dBmv sampled by the RX card in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.32.1.1.28 | ColumnhcxPortRealTimeMeanNoise | read-only | current | This attribute provides a realtime mean noise level in dBmv. It is updated every approx 5 seconds and provides a snap shot of the noise conditions on this rece… |
| 1.3.6.1.4.1.1141.2.32.1.1.29 | ColumnhcxPortRealTimeMinNoise | read-only | current | |
| 1.3.6.1.4.1.1141.2.32.1.1.30 | ColumnhcxPortRealTimeMaxNoise | read-only | current | This attribute provides a realtime max noise level in dBmv. The attribute is updated every approx 5 seconds and provides the maximum noise level during that pe… |
| 1.3.6.1.4.1.1141.2.32.1.1.31 | ColumnhcxPortClearStats | read-write | current | This attribute is used to clear all RX statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr. |
| 1.3.6.1.4.1.1141.2.33 | Nodecom21HcxUpstrmUnitGroup | |||
| 1.3.6.1.4.1.1141.2.33.1 | Tablecom21HcxUpstrmUnitTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.33.1.1 | Rowcom21HcxUpstrmUnitEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.33.1.1.1 | ColumnhcxUpstreamShelfId | read-only | current | contains upstream shelf id. |
| 1.3.6.1.4.1.1141.2.33.1.1.2 | ColumnhcxUpstreamSlotId | read-only | current | contains upstream unit id. This is the slot number. |
| 1.3.6.1.4.1.1141.2.33.1.1.3 | ColumnhcxUpstreamHardwareVersion | read-only | current | contains the hardware version of the RX card. Will be empty if card not present. |
| 1.3.6.1.4.1.1141.2.33.1.1.4 | ColumnhcxUpstreamBootVersion | read-only | current | contains the version of the RX card boot ROM. This will be an empty string if card is missing. |
| 1.3.6.1.4.1.1141.2.33.1.1.5 | ColumnhcxUpstreamUnitPrimServState | read-only | current | contains primary service state of the Upstream Unit. |
| 1.3.6.1.4.1.1141.2.33.1.1.6 | ColumnhcxUpstreamUnitSecServState | read-only | current | contains a string defining the secondary service states of the Upstream Unit. The substrings supported by the Upstream Unit shall be: TEST - in test, as set by… |
| 1.3.6.1.4.1.1141.2.33.1.1.7 | ColumnhcxUpstreamUnitConfigState | read-write | current | The Upstream Unit State is an active-value. Offline will disable the RF and all other cell forwarding. Online enables RF and performs all traffic and schedulin… |
| 1.3.6.1.4.1.1141.2.33.1.1.8 | ColumnhcxUpstreamUnitRestartAction | read-write | current | The RX Unit Restart Action is an active-value. The setting of this attribute to restart(2) causes the RX card to reset and download a new image. |
| 1.3.6.1.4.1.1141.2.33.1.1.9 | ColumnhcxUpstreamGroupId | read-write | current | The Upstream group id defines the receiver group to which this RF Receiver belongs. The shall ensure that the group contains a single RF Receiver card operatin… |
| 1.3.6.1.4.1.1141.2.33.1.1.10 | ColumnhcxAcquisitionEnable | read-write | current | Used to select an RF Receiver for acquisition. The ComController shall ensure that only one RX card in a receiver group is selected for acquisition. |
| 1.3.6.1.4.1.1141.2.33.1.1.11 | ColumnhcxUpDiagTestAction | read-write | current | This attribute is used to invoke the internal RX diagnostic test. In order to activate this test, the card must be placed in the test state. |
| 1.3.6.1.4.1.1141.2.33.1.1.12 | ColumnhcxUpDiagTestResult | read-only | current | This attribute contains the result of the last RX diagnostic test. |
| 1.3.6.1.4.1.1141.2.33.1.1.13 | ColumnhcxUpTestStatusLed | read-only | current | The RX Test Status LED is a read-only attribute which describes the condition of the RX Test Status light emitting diode located on the RX board. A value of on… |
| 1.3.6.1.4.1.1141.2.33.1.1.14 | ColumnhcxUpFaultStatusLed | read-only | current | The RX Fault Status LED is a read-only attribute which describes the condition of the RX Fault Status light emitting diode located on the RX board. A value of … |
| 1.3.6.1.4.1.1141.2.33.1.1.15 | ColumnhcxUpstreamSerialNumber | read-only | current | contains the serial number of the RX card. This will be an empty string if card is missing. |
| 1.3.6.1.4.1.1141.2.34 | Nodecom21HcxVciStatsGroup | |||
| 1.3.6.1.4.1.1141.2.34.1 | Tablecom21HcxVciStatsTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.34.1.1 | Rowcom21HcxVciStatsEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.34.1.1.1 | ColumnhcxStuStatsMacAddr | read-only | current | Contains IEEE 802 medium access control address of the ComPort device. |
| 1.3.6.1.4.1.1141.2.34.1.1.2 | ColumnhcxStatsCurrMinRxCells | read-only | current | Represents the number of cells successfully received in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.34.1.1.3 | ColumnhcxStatsCurrMinRxNullCells | read-only | current | Represents the number of null cells received in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.34.1.1.6 | ColumnhcxStatsCurrMinUncorFecHec | read-only | current | Represents the number of bad cells - HEC/Uncorrectable FEC/ Collisions - reported in cell slots allocated to this ComPort/VCI in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.34.1.1.7 | ColumnhcxStatsCurrMinUncorFecThres | read-write | current | Represents the number of HEC/Uncorrectable FEC error cells received in the present 15minute period that shall cause a threshold trap to be generated. Default i… |
| 1.3.6.1.4.1.1141.2.34.1.1.8 | ColumnhcxStatsCurrMinCorrectedFec | read-only | current | Represents the number of corrected FEC errors for this ComPort/VCI in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.34.1.1.9 | ColumnhcxStatsCurrMinCorFecThres | read-write | current | Represents the number of corrected FEC errors in the present 15minute period that shall cause a threshold trap to be generated. Default is 0 - threshold disabl… |
| 1.3.6.1.4.1.1141.2.34.1.1.10 | ColumnhcxStatsPrevMinRxCells | read-only | current | Represents the number of cells successfully received in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.34.1.1.11 | ColumnhcxStatsPrevMinRxNullCells | read-only | current | Represents the number of null cells received in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.34.1.1.13 | ColumnhcxStatsPrevMinUncorFecHec | read-only | current | Represents the number of bad cells - HEC/Uncorrectable FEC/Collisions - reported in cell slots allocated to this ComPort/VCI in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.34.1.1.14 | ColumnhcxStatsPrevMinCorrectedFec | read-only | current | Represents the number of corrected FEC errors for this ComPort/VCI in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.34.1.1.15 | ColumnhcxStatsCurrMinMeanSignal | read-only | current | This attribute contains the mean signal strength value in dBmv sampled for this ComPort in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.34.1.1.16 | ColumnhcxStatsPrevMinMeanSignal | read-only | current | This attribute contains the mean signal strength value in dBmv sampled for this ComPort in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.34.1.1.17 | ColumnhcxStatsClearStats | read-write | current | This attribute is used to clear all RX ComPort statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wr… |
| 1.3.6.1.4.1.1141.2.35 | Nodecom21HcxRpmIPortGroup | |||
| 1.3.6.1.4.1.1141.2.35.1 | Tablecom21HcxRpmIPortTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.35.1.1 | Rowcom21HcxRpmIPortEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.35.1.1.1 | ColumnhcxRpmIPortShelfId | read-only | current | contains upstream shelf id containing the RX card. |
| 1.3.6.1.4.1.1141.2.35.1.1.2 | ColumnhcxRpmIPortSlotId | read-only | current | contains upstream slot id containing the port. Presently there is one port per card. |
| 1.3.6.1.4.1.1141.2.35.1.1.3 | ColumnhcxRpmRxPortId | read-only | current | Contains the id for the upstream port. Presently should be one only. |
| 1.3.6.1.4.1.1141.2.35.1.1.4 | ColumnhcxRpmIPortId | read-only | current | Contains the id for the RPM I-port. |
| 1.3.6.1.4.1.1141.2.35.1.1.5 | ColumnhcxRpmIPortRecvPower | read-write | current | Contains the receiver power level in dBmv. Default is 0. |
| 1.3.6.1.4.1.1141.2.35.1.1.6 | ColumnhcxRpmIPortConfigState | read-write | current | Used to activate or deactivate the I-Port. For test purposes, one port can be enabled and all others disabled. This will cause the I-Port to be permanently clo… |
| 1.3.6.1.4.1.1141.2.35.1.1.7 | ColumnhcxRpmIPortContSchedType | read-write | current | Used to control the type of contention slot scheduling utilized by this I-Port. The roundRobinOperation indicates that this I-Port shall have a individual cont… |
| 1.3.6.1.4.1.1141.2.36 | Nodecom21HcxRpmStatsGroup | |||
| 1.3.6.1.4.1.1141.2.36.1 | Tablecom21HcxRpmStatsTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.36.1.1 | Rowcom21HcxRpmStatsEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.36.1.1.1 | ColumnhcxStatsRpmShelfId | read-only | current | Contains the id for the shelf in which the associated RX card is located. |
| 1.3.6.1.4.1.1141.2.36.1.1.2 | ColumnhcxStatsRpmSlotId | read-only | current | Contains the id for the upstream slot. |
| 1.3.6.1.4.1.1141.2.36.1.1.3 | ColumnhcxStatsRxPortId | read-only | current | Contains the id for the upstream port. |
| 1.3.6.1.4.1.1141.2.36.1.1.4 | ColumnhcxStatsRpmIPortId | read-only | current | Contains the id for the RPM I-Port. |
| 1.3.6.1.4.1.1141.2.36.1.1.5 | ColumnhcxRpmCurrMinRxCells | read-only | current | Represents the number of cells received via the I-Port in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.6 | ColumnhcxRpmCurrMinRxNullCells | read-only | current | Represents the number of null cells received via the RPM I-Port in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.7 | ColumnhcxRpmCurrMinUncorFecHecCells | read-only | current | Represents the number of received cells with either uncorrectable FEC or HEC errors received via the I-Port in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.8 | ColumnhcxRpmCurrMinCorrectedFec | read-only | current | Represents the number of corrected FEC errors received via the I-Port in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.9 | ColumnhcxRpmCurrMeanNoise | read-only | current | This attribute defines the mean noise value, in dBmv, sampled on the I-Port in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.10 | ColumnhcxRpmCurrMinNoise | read-only | current | Defines the minimum noise level, in dBmv, sampled on the I-Port in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.11 | ColumnhcxRpmCurrMaxNoise | read-only | current | Defines the maximum noise level, in dBmv, sampled on the I-Port in the current 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.12 | ColumnhcxRpmRealTimeMeanNoise | read-only | current | This attribute provides a realtime mean noise level in dBmv sampled on the I-Port. It is updated every approx 5 seconds and provides a snap shot of the noise c… |
| 1.3.6.1.4.1.1141.2.36.1.1.13 | ColumnhcxRpmRealTimeMinNoise | read-only | current | This attribute provides a realtime min noise level in dBmv sampled on the I-Port. The attribute is updated every approx 5 seconds and provides the minimum nois… |
| 1.3.6.1.4.1.1141.2.36.1.1.14 | ColumnhcxRpmRealTimeMaxNoise | read-only | current | This attribute provides a realtime max noise level in dBmv sampled on the I-Port. The attribute is updated every approx 5 seconds and provides the maximum nois… |
| 1.3.6.1.4.1.1141.2.36.1.1.15 | ColumnhcxRpmPrevMinRxCells | read-only | current | Represents the number of cells received via the RPM I-Port in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.16 | ColumnhcxRpmPrevMinRxNullCells | read-only | current | Represents the number of null cells received via the I-Port in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.17 | ColumnhcxRpmPrevMinUncorFecHecCells | read-only | current | Represents the number of cells with uncorrectable FEC or HEC errors received via the I-Port in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.18 | ColumnhcxRpmPrevMinCorrectedFec | read-only | current | Represents the number of corrected FEC errors in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.19 | ColumnhcxRpmPrevMeanNoise | read-only | current | This attribute defines the mean noise value, in dBmv, sampled on the I-Port in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.20 | ColumnhcxRpmPrevMinNoise | read-only | current | Defines the minimum noise level, in dBmv, sampled on the I-Port in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.21 | ColumnhcxRpmPrevMaxNoise | read-only | current | Defines the maximum noise level, in dBmv, sampled on the I-Port in the previous 15 minute period. |
| 1.3.6.1.4.1.1141.2.36.1.1.22 | ColumnhcxRpmCorrFecRatioThres | read-write | current | This attribute defines a threshold point at which a hop of the receive channel frequency shall take place. The threshold is defined as the percentage of correc… |
| 1.3.6.1.4.1.1141.2.36.1.1.23 | ColumnhcxRpmCellErrRatioThres | read-write | current | This attribute defines a threshold point at which a hop of the receive channel frequency shall take place. The threshold is defined as the percentage of FEC/HE… |
| 1.3.6.1.4.1.1141.2.36.1.1.24 | ColumnhcxRpmRatioThresPeriod | read-write | current | This attribute defines the integration period for the error ratio thresholds. This attribute defines the number of seconds over which the threshold is contiguo… |
| 1.3.6.1.4.1.1141.2.36.1.1.25 | ColumnhcxRpmMinErrRatioCells | read-write | current | This attribute defines the minimum number of cells that should be received per second in order to allow the Error and Corrected Cell Thresholds to cause a freq… |
| 1.3.6.1.4.1.1141.2.36.1.1.26 | ColumnhcxRpmCnrThres | read-write | current | Defines the average noise level, in dBmv, at which a frequency hop should occur. Note that the data error thresholds define above take precedence - this CNR th… |
| 1.3.6.1.4.1.1141.2.36.1.1.27 | ColumnhcxRpmClearStats | read-write | current | This attribute is used to clear all RPM statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr. |
| 1.3.6.1.4.1.1141.2.37 | Nodecom21HcxRfAnalysisGroup | |||
| 1.3.6.1.4.1.1141.2.37.1 | Tablecom21HcxRfAnalysisTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.37.1.1 | Rowcom21HcxRfAnalysisEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.37.1.1.1 | ColumnhcxRfAnalysisShelfId | read-only | current | contains upstream shelf id. |
| 1.3.6.1.4.1.1141.2.37.1.1.2 | ColumnhcxRfAnalysisSlotId | read-only | current | contains upstream slot id. |
| 1.3.6.1.4.1.1141.2.37.1.1.3 | ColumnhcxRfAnalysisPortId | read-only | current | contains upstream port id. Presently only one port is supported. |
| 1.3.6.1.4.1.1141.2.37.1.1.4 | ColumnhcxRfAnalysisRpmPortId | read-only | current | contains any RPM I-Port id. Note an RX card or RXM card operating without an RPM expects 1 for this attribute. |
| 1.3.6.1.4.1.1141.2.37.1.1.5 | ColumnhcxRfAnalysisControl | read-write | current | Used to activate or deactivate the RF analysis for a port or I-Port. Default disable. |
| 1.3.6.1.4.1.1141.2.37.1.1.6 | ColumnhcxRfAnalysisPoint1 | read-write | current | This attribute is used to define the first, and lowest, noise level point. Default is -58dBmv. |
| 1.3.6.1.4.1.1141.2.37.1.1.7 | ColumnhcxRfAnalysisPoint2 | read-write | current | This attribute is used to define the second noise level point. This value must be greater than hcxRfAnalysisPoint1. Default is -15dBmv. |
| 1.3.6.1.4.1.1141.2.37.1.1.8 | ColumnhcxRfAnalysisPoint3 | read-write | current | This attribute is used to define the third noise level point. This value must be greater than hcxRfAnalysisPoint2. Default is -10dBmv. |
| 1.3.6.1.4.1.1141.2.37.1.1.9 | ColumnhcxRfAnalysisPoint4 | read-write | current | This attribute is used to define the final noise level point. This value must be greater than hcxRfAnalysisPoint3. Default is -5dBmv. |
| 1.3.6.1.4.1.1141.2.37.1.1.10 | ColumnhcxRfAnalysisBin1Count | read-only | current | This attribute respresents the number of noise samples with levels between hcxRfAnalysisPoint1 and hcxRfAnalysisPoint2. |
| 1.3.6.1.4.1.1141.2.37.1.1.11 | ColumnhcxRfAnalysisBin2Count | read-only | current | This attribute respresents the number of noise samples with levels between hcxRfAnalysisPoint2 and hcxRfAnalysisPoint3. |
| 1.3.6.1.4.1.1141.2.37.1.1.12 | ColumnhcxRfAnalysisBin3Count | read-only | current | This attribute respresents the number of noise samples with levels between hcxRfAnalysisPoint3 and hcxRfAnalysisPoint4. |
| 1.3.6.1.4.1.1141.2.37.1.1.13 | ColumnhcxRfAnalysisClearCount | read-write | current | This attribute is used to clear the three RF analysis counts. |
| 1.3.6.1.4.1.1141.4.30 | NotificationhcxUpstreamUnitPrimStateChange | current | Generated whenever a the hcxUpstreamUnitPrimServState changes in value. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.31 | NotificationhcxUpstreamUnitSecStateChange | current | Generated whenever a the hcxUpstreamUnitSecServState changes in value. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.32 | NotificationhcxUpDiagTestComplete | current | This notification is generated whenever the RX internal diagnostic tests are completed. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.33 | NotificationhcxUpTestStatusLedChange | current | generated whenever there is a change in test LED status. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.34 | NotificationhcxUpFaultStatusLedChange | current | generated whenever there is a change in the Fault LED status. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.35 | NotificationhcxUpOperationFailure | current | This notification is generated by the CC whenever an RX card fails to respond correctly to a request. This failure could indicate either a resource problem or … | |
| 1.3.6.1.4.1.1141.4.37 | NotificationhcxUncorFecHecMinThres | current | Severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.38 | NotificationhcxCorrectedFecMinThres | current | Severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.80 | NotificationhcxCorrFecRatioThres | current | Severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.81 | NotificationhcxCellErrRatioThres | current | Severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.82 | NotificationhcxRxFreqHop | current | This trap is generated when an RX port frequency is hopped due to errors. The hcxUpstrmActiveFreq varbind indicates the new frequency. Severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.83 | NotificationhcxCnrThres | current | Tbd. Severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.84 | NotificationhcxRpmFecRatioThres | current | Severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.85 | NotificationhcxRpmCellErrRatioThresTrap | current | Severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.86 | NotificationhcxRpmCnrThresTrap | current | Tbd. Severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.87 | NotificationhcxRpmInvalidPhyConfig | current | this trap is generated whenever the actual RPM configuration does not match that defined by the hcxUpstrmRpmControl attribute above. Default severity is MINOR. | |
| 1.3.6.1.4.1.1141.4.88 | NotificationhcxRpmInvalidConfClear | current | this trap is generated once the actual and configured RPM configuration match. Severity is CLEARED. | |
| 1.3.6.1.4.1.1141.4.89 | NotificationhcxRpmTimingFault | current | this trap is generated whenever an RPM timing problem is detected. Default severity is MINOR. | |
| 1.3.6.1.4.1.1141.4.130 | NotificationhcxRpmTimingFaultClear | current | this trap is generated once a previously detected RPM timing problem is cleared. Severity is CLEARED. | |
| 1.3.6.1.4.1.1141.4.131 | NotificationhcxRpmLinkError | current | this trap is generated whenever the link between the RPM and RxM is detected as down or in error. Default severity is MINOR. | |
| 1.3.6.1.4.1.1141.4.132 | NotificationhcxRpmLinkErrClear | current | this trap is generated once a previously reported RPM link error is cleared. Severity is CLEARED. | |
| 1.3.6.1.4.1.1141.4.133 | NotificationhcxUpstrmRpmPrimStateChange | current | Generated whenever a the hcxUpstrmRpmPrimServState changes in value. This an event with no clear condition. Only severity is WARNING. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PrimServiceState | INTEGER { is(1), oos(2) } | ||
| RfAnalysisdBmv | INTEGER (-58..-5) | ||
| UpstrmFreqKhz | INTEGER (5000..40000) |